Author Topic: [CTRL]ALT 60 GB (Read 99454 times)

Glod · « **Reply #100 on:** Thu, 28 August 2014, 10:32:53 »

Pcb mount cherry stabs, a recent stab group buy ended but some components websites sell the 2x for cheap but the spacebar wire will need to be made or acquired.

BunnyLake · « **Reply #101 on:** Thu, 28 August 2014, 10:38:44 »

Quote from: Glod on Thu, 28 August 2014, 10:32:53

Pcb mount cherry stabs, a recent stab group buy ended but some components websites sell the 2x for cheap but the spacebar wire will need to be made or acquired.

we have stabs sat here ready, i just need to take some pics and get them populated on the store

Glod · « **Reply #102 on:** Thu, 28 August 2014, 10:39:44 »

Nice, well played.

Gloomy Moonie · « **Reply #103 on:** Thu, 28 August 2014, 10:40:33 »

Dude, where's your ErgoDox!

Gloomy Moonie · « **Reply #104 on:** Thu, 28 August 2014, 10:42:19 »

Quote from: Glod on Thu, 28 August 2014, 10:32:53

Pcb mount cherry stabs, a recent stab group buy ended but some components websites sell the 2x for cheap but the spacebar wire will need to be made or acquired.

Quote from: BunnyLake on Thu, 28 August 2014, 10:38:44

Quote from: Glod on Thu, 28 August 2014, 10:32:53
Pcb mount cherry stabs, a recent stab group buy ended but some components websites sell the 2x for cheap but the spacebar wire will need to be made or acquired.

we have stabs sat here ready, i just need to take some pics and get them populated on the store

Thanks.

Gloomy Moonie · « **Reply #105 on:** Thu, 28 August 2014, 11:11:40 »

Quote from: Gloomy Moonie on Thu, 28 August 2014, 10:40:33

Dude, where's your ErgoDox!

Went over some of your posts, congrats on that awesome lookin' Nerd60 HHKB!
The "cool" factor is definitely tempting, and I'm in a huge dilemma on whether to get one or not, and if so which one (Duck Eagle vs. Nerd60), but I know that if I would, my ErgoDox, wouldn't stand a chance, and it isn't even fully assembled yet.
"A man with a watch knows what time it is. A man with two watches is never sure", as they say.

Glod · « **Reply #106 on:** Fri, 29 August 2014, 16:19:28 »

Don't want to hijack the thread but thanks for the compliments. I hope Cody and my hhkb GON nerd60 helps anyone interested in this awesome [CTRL]ALT edition

Gloomy Moonie · « **Reply #107 on:** Fri, 29 August 2014, 17:06:23 »

Wasn't my intention either, but you're welcome

shimmy1996 · « **Reply #108 on:** Tue, 02 September 2014, 07:36:03 »

Great buy, Bunny!XDD
Would it be possible for it to come with multiple choices of top plates?
i.e. top plate for HHKB layout ?

BunnyLake · « **Reply #109 on:** Tue, 02 September 2014, 07:40:23 »

Quote from: shimmy1996 on Tue, 02 September 2014, 07:36:03

Great buy, Bunny!XDD
Would it be possible for it to come with multiple choices of top plates?
i.e. top plate for HHKB layout ?

the top plate is universal, so covers a ton of layouts

we are looking in to the possibility of the hhkb option now, if that happens, any previous orders will be able to adjust there order to account for this

shimmy1996 · « **Reply #110 on:** Tue, 02 September 2014, 07:45:59 »

Quote from: BunnyLake on Tue, 02 September 2014, 07:40:23

Quote from: shimmy1996 on Tue, 02 September 2014, 07:36:03
Great buy, Bunny!XDD
Would it be possible for it to come with multiple choices of top plates?
i.e. top plate for HHKB layout ?

the top plate is universal, so covers a ton of layouts

we are looking in to the possibility of the hhkb option now, if that happens, any previous orders will be able to adjust there order to account for this

Thanks!
Already joined XDD

kitsun8 · « **Reply #111 on:** Thu, 04 September 2014, 08:02:46 »

Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... $:-\$

BunnyLake · « **Reply #112 on:** Thu, 04 September 2014, 08:03:45 »

Quote from: kitsun8 on Thu, 04 September 2014, 08:02:46

Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... $:-\$

no its doesnt come with diodes, but does come with a presoldered and tested controller

jorgenslee · « **Reply #113 on:** Thu, 04 September 2014, 08:06:33 »

Quote from: BunnyLake on Thu, 04 September 2014, 08:03:45

Quote from: kitsun8 on Thu, 04 September 2014, 08:02:46
Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... $:-\$

no its doesnt come with diodes, but does come with a presoldered and tested controller

What kind of diodes are needed for this? Also, I pmed about a change of order regarding the [CTRL] ALT 60 PCB. Hope you get it.

kitsun8 · « **Reply #114 on:** Thu, 04 September 2014, 10:39:27 »

Quote from: BunnyLake on Thu, 04 September 2014, 08:03:45

Quote from: kitsun8 on Thu, 04 September 2014, 08:02:46
Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... $:-\$

no its doesnt come with diodes, but does come with a presoldered and tested controller

Can i get them soldered on? I can pay more, its just that I want the black NerD PCB.

kitsun8 · « **Reply #115 on:** Thu, 04 September 2014, 10:42:04 »

Quote from: jorgenslee on Thu, 04 September 2014, 08:06:33

Quote from: BunnyLake on Thu, 04 September 2014, 08:03:45
Quote from: kitsun8 on Thu, 04 September 2014, 08:02:46
Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... $:-\$

no its doesnt come with diodes, but does come with a presoldered and tested controller

What kind of diodes are needed for this? Also, I pmed about a change of order regarding the [CTRL] ALT 60 PCB. Hope you get it.

I believe DIP diodes are used. Gon sells them on his website.

BunnyLake · « **Reply #116 on:** Thu, 04 September 2014, 10:43:31 »

we can do that

we also have plenty of diodes and they will be on the store in the next update we are pushing

echo0 · « **Reply #117 on:** Fri, 05 September 2014, 18:26:46 »

Ordered a couple of PCBs.

codyeatworld · « **Reply #118 on:** Sun, 07 September 2014, 11:50:35 »

Happy layout cannot be added or changed at this time. Sorry guys.

Quote from: Latin00032 on Sun, 24 August 2014, 23:35:23

Is one of the options to have a hhkb layout?

It would involve the plate not having the 1.5 mods on each lower corner along with the split backspace and split right shift.

Quote from: Sent on Mon, 25 August 2014, 03:04:05

Quote from: codyeatworld on Mon, 25 August 2014, 00:04:31
I'll find out if I can make happy layout an option.

!!!!!!!

Interested as well.

Sent · « **Reply #119 on:** Tue, 09 September 2014, 18:10:39 »

Sad days but thanks for asking, Cody.

Glod · « **Reply #120 on:** Thu, 11 September 2014, 01:13:21 »

You still have tons of layout options with this board including true hhkb, you just have to deal with those extra 2 1.5 keys .......

BunnyLake · « **Reply #121 on:** Thu, 11 September 2014, 11:03:06 »

quick update guys, im going on holiday in about a week for a week, when i get back we will be making the order

asdfjkl36 · « **Reply #122 on:** Thu, 11 September 2014, 23:58:46 »

Quote from: BunnyLake on Thu, 11 September 2014, 11:03:06

quick update guys, im going on holiday in about a week for a week, when i get back we will be making the order

Sweet

Any update on when the parts for these will show up on the site for purchase?

Edit: How rude of me. Have great vacation!

Sent · « **Reply #123 on:** Fri, 12 September 2014, 00:02:11 »

Quote from: BunnyLake on Thu, 11 September 2014, 11:03:06

quick update guys, im going on holiday in about a week for a week, when i get back we will be making the order

Have a good vacay, Bunz.

henz · « **Reply #124 on:** Fri, 26 September 2014, 06:49:14 »

are we closing in on the first sneak peak?

BunnyLake · « **Reply #125 on:** Fri, 26 September 2014, 10:40:03 »

these will be ordered when i get back from vacation, i get back saturday the 4th of october, so they should be ordered on monday the 6th, so ill close orders on the 5th

once they are ordered, they shouldnt take long, i could be wrong but i think i was told 4 - 6 weeks, but cody will know or be able to get an accurate figure for everyone

cody speaks to gon regularly so whilst im away if people wanna message him regarding anything in this buy he will be able to give you the quickest answer

Reckthor · « **Reply #126 on:** Tue, 07 October 2014, 12:10:42 »

Has the order been placed?

BunnyLake · « **Reply #127 on:** Tue, 07 October 2014, 12:11:37 »

Quote from: Reckthor on Tue, 07 October 2014, 12:10:42

Has the order been placed?

we are just tying up some loose ends and then making the order

ill post here as soon as its up

however if anyone was still thinking, you probably have about 12 - 24 hours to get an order in

BunnyLake · « **Reply #128 on:** Tue, 07 October 2014, 12:59:01 »

scratch that above

order just went in with gon

but we will keep selling a few extras to make up numbers

pcbs will take much less time than housings, so they will be sent to us separately, apparently we will have them in around 2 weeks so i can full fill pcb only orders whilst we are waiting on housings

Sent · « **Reply #129 on:** Tue, 07 October 2014, 16:25:40 »

Quote from: BunnyLake on Tue, 07 October 2014, 12:59:01

scratch that above

order just went in with gon

but we will keep selling a few extras to make up numbers

pcbs will take much less time than housings, so they will be sent to us separately, apparently we will have them in around 2 weeks so i can full fill pcb only orders whilst we are waiting on housings

I actually forgot about this buy already.

)

henz · « **Reply #130 on:** Wed, 08 October 2014, 02:06:43 »

hehe, good for you. as for me ive been counting the days

bueller · « **Reply #131 on:** Wed, 08 October 2014, 02:48:08 »

Quote from: BunnyLake on Tue, 07 October 2014, 12:59:01

scratch that above

order just went in with gon

but we will keep selling a few extras to make up numbers

pcbs will take much less time than housings, so they will be sent to us separately, apparently we will have them in around 2 weeks so i can full fill pcb only orders whilst we are waiting on housings

Sweet, got everything ready for my next build except the PCB

shimmy1996 · « **Reply #132 on:** Wed, 08 October 2014, 21:07:53 »

Hi Bunny. I found that my order disappeared... and it cannot be found in the order history as well...
Should I simply make another order?

BunnyLake · « **Reply #133 on:** Thu, 09 October 2014, 08:20:32 »

Quote from: shimmy1996 on Wed, 08 October 2014, 21:07:53

Hi Bunny. I found that my order disappeared... and it cannot be found in the order history as well...
Should I simply make another order?

that shouldnt be the case assuming you actually put the order through

if you paid etc you should have an email with an order number, if you could send that to me ill get it sorted right out for you

shimmy1996 · « **Reply #134 on:** Thu, 09 October 2014, 09:58:35 »

Quote from: BunnyLake on Thu, 09 October 2014, 08:20:32

Quote from: shimmy1996 on Wed, 08 October 2014, 21:07:53
Hi Bunny. I found that my order disappeared... and it cannot be found in the order history as well...
Should I simply make another order?

that shouldnt be the case assuming you actually put the order through

if you paid etc you should have an email with an order number, if you could send that to me ill get it sorted right out for you

I failed to pay for the last order as I got stuck at payment page, so I wrote a ticket regarding the issue and asked whether it is possible to pay through paypal.

I just placed the order again, hope that's ok. XD

BunnyLake · « **Reply #135 on:** Thu, 09 October 2014, 10:09:02 »

Quote from: shimmy1996 on Thu, 09 October 2014, 09:58:35

Quote from: BunnyLake on Thu, 09 October 2014, 08:20:32
Quote from: shimmy1996 on Wed, 08 October 2014, 21:07:53
Hi Bunny. I found that my order disappeared... and it cannot be found in the order history as well...
Should I simply make another order?

that shouldnt be the case assuming you actually put the order through

if you paid etc you should have an email with an order number, if you could send that to me ill get it sorted right out for you

I failed to pay for the last order as I got stuck at payment page, so I wrote a ticket regarding the issue and asked whether it is possible to pay through paypal.

I just placed the order again, hope that's ok. XD

yeah no problem at all, sorry that ticket was missed sir, we have been doing a big overhaul on the site and it should be a much better experience now

henz · « **Reply #136 on:** Thu, 09 October 2014, 15:21:35 »

Sent you a pm Bunny, didnt get a respone regarding my order. I upgraded my order to custom builds but the order on the site has not yet been updated, will it? Or do you have it written somewhere?

BunnyLake · « **Reply #137 on:** Thu, 09 October 2014, 15:22:31 »

Quote from: henz on Thu, 09 October 2014, 15:21:35

Sent you a pm Bunny, didnt get a respone regarding my order. I upgraded my order to custom builds but the order on the site has not yet been updated, will it? Or do you have it written somewhere?

it gets written in the admin notes, which only we can see sadly

henz · « **Reply #138 on:** Thu, 09 October 2014, 15:24:43 »

k, cool thx

BunnyLake · « **Reply #139 on:** Thu, 16 October 2014, 13:02:13 »

digi · « **Reply #140 on:** Thu, 16 October 2014, 13:12:54 »

Quote from: BunnyLake on Thu, 16 October 2014, 13:02:13

Show Image

looks like a pic from GON's workbench. Sick dude!

SpAmRaY · « **Reply #141 on:** Thu, 16 October 2014, 13:13:03 »

Quote from: BunnyLake on Thu, 16 October 2014, 13:02:13

Show Image

I would put that on the wall and use it as decoration.

Reckthor · « **Reply #142 on:** Thu, 16 October 2014, 13:14:10 »

Yes! any word on the cases?

BunnyLake · « **Reply #143 on:** Thu, 16 October 2014, 13:16:09 »

Quote from: Reckthor on Thu, 16 October 2014, 13:14:10

Yes! any word on the cases?

they are gonna be a bit longer, but the pcbs are being shipped to me tomorrow, and as soon as they arrive, ill get the pcb only orders shipped out, and because im more excited about this than anyone, any time i get new pics and updates ill pop them right here

add1ct3dd · « **Reply #144 on:** Thu, 16 October 2014, 13:32:41 »

Just wondered - are we still able to buy - and is the $400 offer pre-soldered? I'd be after the whole thing, but want to solder it myself (something to do

).

radio_killah · « **Reply #145 on:** Thu, 16 October 2014, 13:33:20 »

Quote from: BunnyLake on Thu, 16 October 2014, 13:02:13

Show Image

Hot damn that is a sexy pcb..

byker · « **Reply #146 on:** Thu, 16 October 2014, 13:34:33 »

Quote from: BunnyLake on Thu, 16 October 2014, 13:02:13

Show Image

Is that what all of them look like now? If so I really want to order one! :p :eek:

henz · « **Reply #147 on:** Thu, 16 October 2014, 13:37:17 »

oh oh oh oh

BunnyLake · « **Reply #148 on:** Thu, 16 October 2014, 14:25:51 »

Quote from: byker on Thu, 16 October 2014, 13:34:33

Quote from: BunnyLake on Thu, 16 October 2014, 13:02:13
Show Image

Is that what all of them look like now? If so I really want to order one! :p :eek:

yeah that is the final pcb, being shipped tomorrow to me, ive been told in person they are stunning

BunnyLake · « **Reply #149 on:** Thu, 16 October 2014, 14:26:45 »

Quote from: add1ct3dd on Thu, 16 October 2014, 13:32:41

Just wondered - are we still able to buy - and is the $400 offer pre-soldered? I'd be after the whole thing, but want to solder it myself (something to do ).

so the 400 option is for a totally custom built, with stickers lube leds etc all to order

if you wanna do it yourself, but have everything provided for you,l if you shoot me a pm with exactly what you want, i can sort a quote for you

News:

Author Topic: [CTRL]ALT 60 GB (Read 99454 times)