Author Topic: [GB] E8-V1 Custom TKL - SORTING THE BOARDS  (Read 570053 times)

0 Members and 1 Guest are viewing this topic.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4177
  • Location: Tennessee - USA
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1450 on: Fri, 24 August 2018, 12:50:40 »
Sorry to interrupt the conversation, but has anyone gotten the LEDs on the top left to work? I also cannot get the caps lock LED to turn on (or toggle for that matter).

Mine all work.  I didn’t do anything special

Offline actualglacier

  • ¯\_(ツ)_/¯
  • Posts: 93
  • 😳
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1451 on: Sun, 26 August 2018, 11:25:36 »
So, are we supposed to just... accept our losses at this point?
actualglacier on youtube


Offline balotelli00

  • Posts: 31
  • Location: KL
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1452 on: Mon, 27 August 2018, 02:14:17 »
So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1453 on: Mon, 27 August 2018, 07:59:45 »
So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)

Whoot! Congrats!

Offline gt1989

  • Posts: 189
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1454 on: Mon, 27 August 2018, 09:15:49 »
So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)
Did you get any kind of tracking info, or did it just show up?

Sent from my Pixel 2 XL using Tapatalk


Offline balotelli00

  • Posts: 31
  • Location: KL
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1455 on: Mon, 27 August 2018, 21:21:40 »
So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)
Did you get any kind of tracking info, or did it just show up?

Sent from my Pixel 2 XL using Tapatalk



So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)

Whoot! Congrats!

Thanks man and good luck with yours :)

So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)
Did you get any kind of tracking info, or did it just show up?

Sent from my Pixel 2 XL using Tapatalk

He didn't gave me the tracking number. ****e just showed up at my doorstep on Saturday after paying the shipping fees about a month ago.

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1456 on: Mon, 27 August 2018, 21:24:46 »
He didn't gave me the tracking number. ****e just showed up at my doorstep on Saturday after paying the shipping fees about a month ago.

Oh wow. Well maybe mine had already been shipped... *crosses fingers *

Offline cuongnt91

  • Posts: 31
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1457 on: Mon, 27 August 2018, 23:17:41 »
So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)

it's very good to hear that
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

Offline Gajible

  • Posts: 252
  • Location: north
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1458 on: Tue, 28 August 2018, 01:05:42 »
So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)

it's very good to hear that
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

Thanks for putting in the effort dude. I've yet to pay the shipping as well, I'll wait for you to get back to us regarding Kuang before I do.

Thanks!

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1459 on: Thu, 30 August 2018, 15:19:28 »
Holy shiet. I just got a text from DHL that a package from "POS INDONESIA" is arriving on Tuesday.

I assume kuang is shipping via DHL, as I can't remember ordering anything recently from Indonesia.

Offline FrostyToast

  • Litshoard
  • * Exquisite Elder
  • Posts: 2368
  • Location: Canada
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1460 on: Thu, 30 August 2018, 16:09:49 »
I was holding off on sending more money until things started moving. Looks like I'll be sending in the shipping fees this night when I get home.
Quote from: elton5354
I don't need anymore keyboards

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1461 on: Thu, 30 August 2018, 17:19:16 »
I was holding off on sending more money until things started moving. Looks like I'll be sending in the shipping fees this night when I get home.

As per cuongnt91's comment. I'd hold off for now.



it's very good to hear that
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

Offline FrostyToast

  • Litshoard
  • * Exquisite Elder
  • Posts: 2368
  • Location: Canada
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1462 on: Thu, 30 August 2018, 21:33:15 »
I was holding off on sending more money until things started moving. Looks like I'll be sending in the shipping fees this night when I get home.

As per cuongnt91's comment. I'd hold off for now.



it's very good to hear that
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

I see. Thank you very much since it seems that escaped my sight.

Here's hoping it's smooth sailing from here on out.
Quote from: elton5354
I don't need anymore keyboards

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1463 on: Thu, 30 August 2018, 21:49:43 »
I was holding off on sending more money until things started moving. Looks like I'll be sending in the shipping fees this night when I get home.

As per cuongnt91's comment. I'd hold off for now.



it's very good to hear that
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

I see. Thank you very much since it seems that escaped my sight.

Here's hoping it's smooth sailing from here on out.

I hope so. The tracking notification was a surprise to me!

Offline Enz0man

  • Posts: 26
  • Location: Edmonton, Alberta, Canada
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1464 on: Tue, 04 September 2018, 16:39:14 »
So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)

it's very good to hear that
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

Thank you so much for getting this going again. I'm holding off payment until you get in contact with him. I just want to build my last keyboard already :(

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1465 on: Tue, 04 September 2018, 20:19:57 »
Holy shiet. I just got a text from DHL that a package from "POS INDONESIA" is arriving on Tuesday.

I assume kuang is shipping via DHL, as I can't remember ordering anything recently from Indonesia.

Well apparently the DHL package wasn't my E8-V1... Kinda disappointed, but in the other hand I got some alpha caps!

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1466 on: Fri, 07 September 2018, 18:32:15 »
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

Any update here?


Is Kuang still updating this Google sheet?

https://docs.google.com/spreadsheets/d/14lYDVr2Y6TSb7o_OJVbKxBEAn1Ct7PbE8NZRSLaID6Y/htmlview#

Offline balotelli00

  • Posts: 31
  • Location: KL
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1467 on: Sat, 15 September 2018, 22:58:45 »
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

Any update here?


Is Kuang still updating this Google sheet?

https://docs.google.com/spreadsheets/d/14lYDVr2Y6TSb7o_OJVbKxBEAn1Ct7PbE8NZRSLaID6Y/htmlview#

Nope. My order is E53, should've marked as received.

Offline alveeno

  • Posts: 182
  • Location: Seattle
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1468 on: Sun, 16 September 2018, 01:23:07 »
Sorry to interrupt the conversation, but has anyone gotten the LEDs on the top left to work? I also cannot get the caps lock LED to turn on (or toggle for that matter).

Late reply,

 but yeah, mine work. I didn't have to do anything special to get it to work.

Offline mniels

  • Posts: 164
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1469 on: Thu, 20 September 2018, 09:35:59 »
So, are we supposed to just... accept our losses at this point?

Just received my board yesterday, Thank God. Hope you will receive yours soon :)

it's very good to hear that
i have not contacted with Kuang for many weeks so i had nothing to update
At the moment, STOP paying shipping fee again until i can contact with Kuang
Hope people who paid fee again and PMed me will get your board

Thank you so much for getting this going again. I'm holding off payment until you get in contact with him. I just want to build my last keyboard already :(

I had not checked the thread in quite some time because I didn't want to be depressed.  So much for that idea, and I am glad that I waited to pay shipping, especially when mine is ready to go but still wouldn't ship.

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1470 on: Mon, 08 October 2018, 14:48:35 »
@cuongnt91, is there any update here? Has kuang began shipping boards again?

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1471 on: Sat, 27 October 2018, 02:44:02 »
updates?

Offline mniels

  • Posts: 164
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1472 on: Sun, 11 November 2018, 05:03:24 »
So, have we just completely given up at this point?

Offline Shados

  • Posts: 129
  • Location: Melbourne, Australia
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1473 on: Tue, 13 November 2018, 00:51:14 »
So, have we just completely given up at this point?

Short of getting on a plane, what is there to be done?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1474 on: Tue, 13 November 2018, 00:56:23 »
great tkl race 2017 2018 2019?

****ed up how this turned out, seemed so promising

and i know some people who, while they got their boards, would not be totally truthful to call them high quality

oh well

i hope the last few people get their boards so we can put this behind us and run better GBs
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline actualglacier

  • ¯\_(ツ)_/¯
  • Posts: 93
  • 😳
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1475 on: Fri, 14 December 2018, 15:20:27 »
Heeeello?
actualglacier on youtube


Offline Aox

  • Posts: 75
  • Location: Irvine, CA
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1476 on: Fri, 14 December 2018, 16:13:06 »
I've never been happier to have paypal get my money back than I was for this GB...

Offline meowizzle

  • Posts: 18
  • Location: Utah
  • Kittens are great. So am I.
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1477 on: Thu, 31 January 2019, 14:29:13 »
Any chance we can resurrect this thread and get kuang to come back?


Sent from my iPhone using Tapatalk
Never stop Clickin!!

Offline gt1989

  • Posts: 189
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1478 on: Thu, 31 January 2019, 14:30:07 »
I've honestly given up on this.

Sent from my Pixel 2 XL using Tapatalk


Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1479 on: Thu, 31 January 2019, 14:30:08 »
Any chance we can resurrect this thread and get kuang to come back?


Sent from my iPhone using Tapatalk

I certainly hope so! But I've really given up hope here  :(

Offline Enz0man

  • Posts: 26
  • Location: Edmonton, Alberta, Canada
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1480 on: Wed, 19 June 2019, 21:06:39 »
Well this is sad. My first custom premium board never happened :(

Offline gt1989

  • Posts: 189
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1481 on: Wed, 19 June 2019, 21:07:48 »
Well this is sad. My first custom premium board never happened :(
Unfortunately the same thing for me.

Sent from my Pixel 2 XL using Tapatalk


Offline Enz0man

  • Posts: 26
  • Location: Edmonton, Alberta, Canada
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1482 on: Tue, 25 June 2019, 20:44:23 »
Well this is sad. My first custom premium board never happened :(
Unfortunately the same thing for me.

Sent from my Pixel 2 XL using Tapatalk

If only I could've seen into the future and filed a PayPal claim...

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1483 on: Tue, 25 June 2019, 20:47:48 »
Well this is sad. My first custom premium board never happened :(
Unfortunately the same thing for me.

Sent from my Pixel 2 XL using Tapatalk

If only I could've seen into the future and filed a PayPal claim...

You and me both brotha. What's done is done.

Every time I see a response to this thread I still get excited though

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4177
  • Location: Tennessee - USA
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1484 on: Tue, 25 June 2019, 21:02:27 »
You think they are just sitting around somewhere or do you think someone sold them off?  I have mine.  It's a nice color and I built it well.  I feel guilty even using it.

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1485 on: Tue, 25 June 2019, 21:38:14 »
You think they are just sitting around somewhere or do you think someone sold them off?  I have mine.  It's a nice color and I built it well.  I feel guilty even using it.

Don't feel guilty. I know I wouldn't.

And I'm sure at least most of them were sold off locally.

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1486 on: Tue, 25 June 2019, 22:07:52 »
great tkl race 2017 2018 2019?

****ed up how this turned out, seemed so promising

and i know some people who, while they got their boards, would not be totally truthful to call them high quality

oh well

i hope the last few people get their boards so we can put this behind us and run better GBs

I hope so too, man. Even after stepping away from the scene for a while since joining the GB, I'm bummed that this is one of the only outstanding GBs I've been in that seems to have no hope of delivering.

Offline reidd

  • Posts: 72
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1487 on: Mon, 08 July 2019, 14:18:14 »
Does anyone know what size the case screws are? I just got one off MM and it is missing a few.

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1488 on: Tue, 09 July 2019, 05:00:15 »
@Exclusive rev 2 when?

Offline reidd

  • Posts: 72
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1489 on: Tue, 09 July 2019, 10:02:01 »
Does anyone know what size the case screws are? I just got one off MM and it is missing a few.

Never mind, looks like the previous user had just stripped a couple of the threads along the bottom edge of the board. :-X It does seem like a design flaw how thin the metal is where the case screws go in along the bottom.

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1490 on: Fri, 07 February 2020, 17:34:22 »
Those of you with the keyboard, what have you been using to reprogram it?  There was an earlier discussion about using the Bootmapper client, but this PCB uses an ATMega32a controller.  Looking at QMK, there are a bunch of Exclusive board layouts listed, but not E8-V1. 
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline Vov

  • Posts: 25
  • Location: cali
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1491 on: Fri, 07 February 2020, 19:28:25 »
Those of you with the keyboard, what have you been using to reprogram it?  There was an earlier discussion about using the Bootmapper client, but this PCB uses an ATMega32a controller.  Looking at QMK, there are a bunch of Exclusive board layouts listed, but not E8-V1.

I've been using Bootmapper client as well. Haven't looked into trying QMK with it though
1.2 og | 2.0 add | Fallacy | Alpha65 | Ojou | Orion v2.5 | Kei | FMJ Poker | GSKT-00 | Unikorn 2.1

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4177
  • Location: Tennessee - USA
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1492 on: Fri, 07 February 2020, 20:50:53 »
BMC works on mine.

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1493 on: Fri, 07 February 2020, 20:54:54 »
Do you press a certain key to get into bootloader mode when connecting via USB?  I get a connection error message.  Keyboard plugged in via USB, then starting the BMC and selecting the default "ps2avrGB & ps2avrGB_split" Target.  "Error setting action: Communication error with device"

Stock firmware, only soldered in switches.


Ok, google was my friend: I had to just plug the keyboard to a different USB port, and ps2avrGB driver was installed correctly.
« Last Edit: Fri, 07 February 2020, 21:07:39 by Photoelectric »
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4177
  • Location: Tennessee - USA
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1494 on: Fri, 07 February 2020, 21:13:26 »
 No special key, it just works.  Make sure you aren’t connected to a usb hub.  Go straight into the computer. 

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1495 on: Fri, 07 February 2020, 21:29:15 »
Works now.  I was connecting to the usual USB port I use for keyboards (same cable) to the back of the computer.  Switched to front panel USB port to test, and that worked to automatically load the driver.  Not sure why the usual USB port didn't work for that.

Now to figure out why in-switch LEDs are not lighting up.  RGB LEDs under the PCB are working correctly.
« Last Edit: Fri, 07 February 2020, 21:37:29 by Photoelectric »
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4177
  • Location: Tennessee - USA
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1496 on: Fri, 07 February 2020, 21:44:21 »
I suggested that because I’ve done the same thing myself, ha!  VIA does that for me too. Some ports are just finicky I guess.

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1497 on: Sat, 08 February 2020, 00:07:24 »
Has anyone ever found out if any other aftermarket PCBs work for this board? my PCB has 2 lifted pads :eyes:

I was looking at the phantom PCB but not sure if that one is compatible or not
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline onmybikedrunk

  • Posts: 236
  • Location: Portland, OR
    • Danny Woods - Industrial Designer
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1498 on: Sun, 05 April 2020, 02:01:21 »
Does anyone here have an extra PCB that you might be willing to sell?  Or can you point me in the direction for a compatible replacement?

Offline gt1989

  • Posts: 189
Re: [GB] E8-V1 Custom TKL - SORTING THE BOARDS
« Reply #1499 on: Thu, 09 July 2020, 08:34:23 »
So apparently Kuang2 is still involved in the keyboard community in Vietnam and is designing things despite never shipping out the rest of our boards.

https://www.reddit.com/r/MechanicalKeyboards/comments/ho18lw/keyboard_science_keylice_no2_when_tgr_and_keycult/
« Last Edit: Thu, 09 July 2020, 08:37:29 by gt1989 »