Post by: noisyturtle on Thu, 19 March 2015, 13:29:20
Anyway, I was just looking for a new hobby to pass the time and decided to pick up this cool looking Sazabi Ver. Ka model to get back in the game. RIP future shelf space :))
(http://www.gunjap.net/site/wp-content/uploads/2014/03/MG_Sazabi_Ka_09.jpg)
Anybody else build models of any kind, or even Gundams? Got any pro tips on making it look like it does in that picture?
Post by: R1N3 on Thu, 19 March 2015, 13:57:55
Lost the few I had together in a move. I've still got some SD models somewhere around here I think..
Post by: tp4tissue on Thu, 19 March 2015, 14:32:02
I was very close to going all in with the compressor, the single hair brushes... etc..
Post by: Jokrik on Thu, 19 March 2015, 19:16:08
But don't think I have more spare times now... :(
Been wanting a glass unicorn one...
Post by: slickmamba on Thu, 19 March 2015, 19:18:26
Post by: jonathanyu on Fri, 20 March 2015, 02:11:56
To make it looks good, I think get a sharp hobby knife and practice is most important ^-^ and also get some very fine sand paper
the Sazabi in the picture probably painted on every parts because I think the Sazabi ver ka have a lighter red than the one in picture
I suck at paint though :))
Post by: Krytone on Fri, 20 March 2015, 03:31:53
Really need to paint these models to make it look really good.
If i remember correctly these are what i do for each of my gundam.
- Cut each piece and group by body part then by color
- sand each part
- spray primer
- sand again with finer grit
- spray desired color
- do panel lining
- clear coat
- assemble
only fun part for me is the assemble part. lol
Post by: NoblesseOblige on Fri, 20 March 2015, 07:48:34
As for actual models, I'm not too much into Gundam myself but other mech series such as Armored Core. I just got my hands on a couple models of the NEXT named Noblesse Oblige (name is a total coincidence) from the series. Might be awhile until I actually get around to assembling them though due to work. I was into car/plane/rocket models when I was young. Used to build them with my dad. It's probably been 20 years since then though.
Post by: noisyturtle on Fri, 20 March 2015, 10:02:08
What has been your favorite Gunpla to build? Which ones have the best shelf presence? Thinking about the GN-0000 + GNR-010 TRANS-AM RAISER as my next build if I can find one.
Post by: Lastpilot on Fri, 20 March 2015, 10:03:39
In other words, yes I build but they all suck lol.
Post by: noisyturtle on Fri, 20 March 2015, 10:06:59
Well the more I learn, the more expensive this hobby is getting :))
Post by: NoblesseOblige on Fri, 20 March 2015, 10:08:20
(I'm not ready to start painting $100 models yet. Maybe someday.)
I'm anxious about painting a $100 model too. So I'm planning to order some cheaper models to practice on. For example I found the following model for $20 on ebay: http://www.amazon.com/Kotobukiya-Armored-Core-Rosenthal-CR-Hogire/dp/B0074ZTOBK
Once I order all the proper tools and paints for it I may do a build log.
Post by: noisyturtle on Fri, 20 March 2015, 10:39:11
(http://i.imgur.com/Seeyp02.jpg)]
(http://i.imgur.com/ZCMth5y.jpg)
Post by: Binge on Fri, 20 March 2015, 12:30:37
Post by: Lastpilot on Fri, 20 March 2015, 12:47:05
Ahh, so that's how people are getting such fine and even coats? Air brush equipment.Yes and yes. It goes pretty deep bruh. Which is why I had to bail. Already had too many DIY hobbies when all I wanted was something pretty on my desk.
Well the more I learn, the more expensive this hobby is getting :))
Only things I look at nowadays are hi quality pre-made models like: "Gundam Metal Build" series or the "Macross DX Chogokin" or "Macross Yamato/Arcadia"
Post by: Johan on Fri, 20 March 2015, 13:10:30
Post by: Blackehart on Fri, 20 March 2015, 13:35:05
IT'S LOUD ROAR TELLS ME TO GRASP THE BOTTLE OF WHISKEY!
(http://i.imgur.com/PaAuTjT.jpg?1)
THE UNDEFEATED SCHOOL OF THE EAST!
kekekekekekeke
Have smaller ones sitting in front of my monitors at work...such a nerd
Post by: Badwrench on Fri, 20 March 2015, 15:09:19
Here are a couple I have out. I have dozens in storage until I move into a larger place and have a display case again.
(http://tapatalk.imageshack.com/v2/15/03/20/6addcf074c79ee0457193e1c0b4aec8b.jpg)
(http://tapatalk.imageshack.com/v2/15/03/20/a1ca7850f655ee2e11bece311b393e42.jpg)
Post by: jonathanyu on Sat, 21 March 2015, 01:44:12
....this hand of mine burns with an awesome power...
IT'S LOUD ROAR TELLS ME TO GRASP THE BOTTLE OF WHISKEY!Show Image(http://i.imgur.com/PaAuTjT.jpg?1)
THE UNDEFEATED SCHOOL OF THE EAST!
kekekekekekeke
Have smaller ones sitting in front of my monitors at work...such a nerd
^-^ i have both of them, but in gold
Post by: hwood34 on Sat, 21 March 2015, 16:49:52
(http://i.imgur.com/9VZ6PXX.png)
(http://i.imgur.com/SJ6xnzc.png)
(http://i.imgur.com/hP1ZHwE.png)
(http://i.imgur.com/LQVuqnW.png)
Post by: Blackehart on Sat, 21 March 2015, 17:10:44
let's do thisShow Image(http://i.imgur.com/9VZ6PXX.png)Show Image(http://i.imgur.com/SJ6xnzc.png)Show Image(http://i.imgur.com/hP1ZHwE.png)Show Image(http://i.imgur.com/LQVuqnW.png)
dafuq!
glue?!?!?!
-_-
UGH!!!!
I've been just putting them together...it would totally save me the headaches of finding pieces if it falls over.
ORDERING!!!!!!!
Post by: noisyturtle on Sat, 21 March 2015, 17:12:09
let's do thisShow Image(http://i.imgur.com/9VZ6PXX.png)Show Image(http://i.imgur.com/SJ6xnzc.png)Show Image(http://i.imgur.com/hP1ZHwE.png)Show Image(http://i.imgur.com/LQVuqnW.png)
Woo, we can do our first builds together :D
Post by: Bromono on Sat, 21 March 2015, 17:18:40
Post by: Blackehart on Sat, 21 March 2015, 17:25:27
I love gundam :) I actualy am having Noko make me a wrist rest with a mini gundam head on it. Though I never actualy tried making a model kit for them. I did some for zoids back when I was a kid. But never gundam... Now I want to build one..
Gooble gobble....
Gooble gobble...
ONE OF US!
Post by: hwood34 on Sat, 21 March 2015, 17:49:15
(http://media.tumblr.com/tumblr_m6qi8ucpLc1rq583k.gif)let's do thisShow Image(http://i.imgur.com/9VZ6PXX.png)Show Image(http://i.imgur.com/SJ6xnzc.png)Show Image(http://i.imgur.com/hP1ZHwE.png)Show Image(http://i.imgur.com/LQVuqnW.png)
Woo, we can do our first builds together :D
Post by: Fire Brand on Sat, 21 March 2015, 19:50:56
Geara Doga MG backhand :p
Post by: paradox on Sun, 22 March 2015, 08:04:56
Post by: tp4tissue on Sun, 22 March 2015, 17:20:15
(http://i1081.photobucket.com/albums/j350/fire_brand15/Nendoroids%20and%20Loot/38B64785-A60C-4AF6-B309-ED91C04C6BDC.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/Nendoroids%20and%20Loot/38B64785-A60C-4AF6-B309-ED91C04C6BDC.jpg.html)
Geara Doga MG backhand :p
This gundam has a korean pilot ?
Post by: dante on Sun, 22 March 2015, 17:28:21
Post by: hwood34 on Sun, 22 March 2015, 17:34:28
(https://farm9.staticflickr.com/8728/16872979176_97690fd68f_c.jpg) (https://flic.kr/p/rH1qS5)
Post by: Krytone on Sun, 22 March 2015, 21:36:22
ill try to post mine once i get them off my storage room :-\
Post by: jonathanyu on Mon, 23 March 2015, 00:18:32
This is just really small part of what I have. ^-^
Let me post picture few days later
Post by: Krytone on Mon, 23 March 2015, 09:37:30
(http://i62.photobucket.com/albums/h113/Krytone/Gundam01_zpsqcdpe4bt.jpg)
(http://i62.photobucket.com/albums/h113/Krytone/Gundam02_zps1zkvq85u.jpg)
Getting better a bit.
(http://i62.photobucket.com/albums/h113/Krytone/Gundam03_zps3rftqeq6.jpg)
And my current favorite model. Red Astray MG
(http://i62.photobucket.com/albums/h113/Krytone/Gundam05_zpshb0ngdsn.jpg)
(http://i62.photobucket.com/albums/h113/Krytone/Gundam04_zps65o1twun.jpg)
Post by: Evo_Spec on Mon, 23 March 2015, 11:03:46
Post by: hwood34 on Mon, 23 March 2015, 11:24:11
These are the only ones i can find in my dusty storage. These are left cause i used them when i was starting to know how to paint as you can see the roughness. lol.That Red Astray is sexy afShow Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam01_zpsqcdpe4bt.jpg)Show Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam02_zps1zkvq85u.jpg)
Getting better a bit.Show Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam03_zps3rftqeq6.jpg)
And my current favorite model. Red Astray MGShow Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam05_zpshb0ngdsn.jpg)Show Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam04_zps65o1twun.jpg)
Post by: noisyturtle on Mon, 23 March 2015, 16:49:24
Post by: mr.squishy on Mon, 23 March 2015, 17:13:03
Post by: Krytone on Mon, 23 March 2015, 21:23:41
I don't want to get into this for money reasons but this is a past time memory i have of doing these with my brother and i live in Japan.......i'll probably break in the next coming weeks when i'm away from my family in another city....
That is also the reason why i stopped cause its too expensive to maintain especially once all the materials and equipment accumulated. Good thing some of the materials for painting i can use in may keycaps.
These are the only ones i can find in my dusty storage. These are left cause i used them when i was starting to know how to paint as you can see the roughness. lol.That Red Astray is sexy afShow Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam01_zpsqcdpe4bt.jpg)Show Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam02_zps1zkvq85u.jpg)
Getting better a bit.Show Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam03_zps3rftqeq6.jpg)
And my current favorite model. Red Astray MGShow Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam05_zpshb0ngdsn.jpg)Show Image(http://i62.photobucket.com/albums/h113/Krytone/Gundam04_zps65o1twun.jpg)
It really does, especially the 2 samurai swords which is why i choose red frame instead of the blue frame back then.
Ugh, Topcoat/ Mr. Clear is expensive in the US. Either pay $20+ and get it CONUS shipped or pay $10 and wait a month for it to get here from Japan :(
Good thing its a bit easier here to get most of the supplies i need. I still need to drive to the city to get to the actual store which i prefer over online. But yeah, expensive as hell just for the paints/primer/top coats.
Post by: noisyturtle on Mon, 23 March 2015, 22:15:42
Not Gundam, but I build model airplanes. The "stick and tissue" type. I've been working on a 48" wingspan P-38 for about 4 years now.
That sounds awesome, the stick and tissue models always had a delicate beauty to them.
Post by: mr.squishy on Mon, 23 March 2015, 23:23:35
They have a simplistic, yet simultaneously complex, beauty to them, especially when left as just skeletons. I had built 8 models over the course of a 2 year period where I really focused on building them, although I haven't found any time for them recently. My goal is to finish the P-38 within this year: that's my sort of personal ultimatum.Not Gundam, but I build model airplanes. The "stick and tissue" type. I've been working on a 48" wingspan P-38 for about 4 years now.
That sounds awesome, the stick and tissue models always had a delicate beauty to them.
Post by: jonathanyu on Mon, 23 March 2015, 23:50:09
Post by: noisyturtle on Tue, 24 March 2015, 00:10:18
:p planning on getting my first PG grade Gundam kit. Do you guys think I should get the 00 Raiser or Zeta? :p
ZGMF-X20A Strike Freedom :-X
Post by: jonathanyu on Tue, 24 March 2015, 00:12:06
:p planning on getting my first PG grade Gundam kit. Do you guys think I should get the 00 Raiser or Zeta? :p
ZGMF-X20A Strike Freedom :-X
:p got a mg strike freedom already, want to try something new
Post by: poog on Tue, 24 March 2015, 00:46:29
Ugh, Topcoat/ Mr. Clear is expensive in the US. Either pay $20+ and get it CONUS shipped or pay $10 and wait a month for it to get here from Japan :(
is it that much better than stuff like testors, vallejo, or even krylon?
Post by: jonathanyu on Tue, 24 March 2015, 00:57:55
Ugh, Topcoat/ Mr. Clear is expensive in the US. Either pay $20+ and get it CONUS shipped or pay $10 and wait a month for it to get here from Japan :(
is it that much better than stuff like testors, vallejo, or even krylon?
imo, any paint that work on abs plastic can do the job. I really don't think there is huge difference between paint that you can get from any hardware store and "model paint"
Post by: Fire Brand on Tue, 24 March 2015, 06:33:54
:p planning on getting my first PG grade Gundam kit. Do you guys think I should get the 00 Raiser or Zeta? :pPG Unicorn :X Its so nice, but out of those two the 00 Raiser never really liked the zeta, also might have to try find a RG something for someone if you all do start painting them as a prize :) would be nice to get people into this.
Now I just have to wait 5 months till HLJ restocks the MG GM Kai :( I ended up waiting 6 months for the MG Geara Doga :X but I have got into nendoroids currently little buggers are just too cute :x
Post by: Matt3o on Tue, 24 March 2015, 07:05:16
(http://i.imgur.com/NggjF5Z.jpg)
Post by: noisyturtle on Wed, 25 March 2015, 15:45:21
(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)
(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
Post by: mr.squishy on Wed, 25 March 2015, 17:07:54
i need this for reasons.I need one too actually...Show Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
Post by: Lastpilot on Wed, 25 March 2015, 22:16:04
http://gundamguy.blogspot.com/2014/05/mg-1100-msn-04-snow-sazabi-custom-build.html
Post by: mr.squishy on Wed, 25 March 2015, 22:50:30
i need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
Post by: jonathanyu on Thu, 26 March 2015, 01:04:22
i need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
:-X pretty expensive for a HG
Post by: jonathanyu on Thu, 26 March 2015, 01:10:56
^-^ started to build this more than half a year ago, still haven't finished it yet.
Post by: mr.squishy on Thu, 26 March 2015, 01:26:05
What's a good (and extremely cheap) beginner kit? Like, are there any that you don't have to paint? (I'd say I'm uber lazy but really I just don't want to buy paint)
I'd like to build my first Gundam.
Post by: jonathanyu on Thu, 26 March 2015, 03:04:53
I probably shouldn't have looked at this thread.
What's a good (and extremely cheap) beginner kit? Like, are there any that you don't have to paint? (I'd say I'm uber lazy but really I just don't want to buy paint)
I'd like to build my first Gundam.
Any HG(High Grade) is pretty good for beginner ^-^ just choose one that look cool to you
And don't worry about painting, painting makes it looks better, but without painting still looks very good
Post by: Krytone on Thu, 26 March 2015, 04:41:10
Some paints them just to remove the shiny effect of the bare plastic of the model but that can be fixed by sanding it with a fine grit sandpaper, but also, this are optional steps.
Hope that helps.
Post by: Matt3o on Thu, 26 March 2015, 04:45:58
Post by: Krytone on Thu, 26 March 2015, 04:55:46
https://playevolution.wordpress.com/2010/01/27/mg-1100-ms-06j-zaku-ii-ver-2-0-final-write-up/
These are the most popular non-gundam mecha because of the big surface area for painting purposes or decal designs.
Post by: Fire Brand on Thu, 26 March 2015, 05:32:04
what would be the less gundam-y gundam model? I'm not a huge gundam fan, but I wouldn't mind building some big ass robot. What would be in your opinion the best gundam model for a not gundam fan?RGM-96X Jesta
Only becaus I love GMs but otherwise it's looks like a robot army man =) you can get it in both HG 1/144 or MG 1/100 and both are awesome
Post by: hwood34 on Thu, 26 March 2015, 08:31:54
dat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
Post by: Fire Brand on Thu, 26 March 2015, 10:01:20
Lol thats MG price, almost as expensive as a Jegan D-type makes me cry every time making mass production suits exclusive :Idat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
Post by: Matt3o on Thu, 26 March 2015, 13:11:01
(http://1.bp.blogspot.com/-GkfU_h-qgZI/ThpBescO_vI/AAAAAAAAOi8/ru4x2Nx_7no/s1600/1%253A60+Gerbera+by+Richter693.jpg)
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
(http://2.bp.blogspot.com/-U8z_rfnlxkE/U1gdn09BSBI/AAAAAAAC3Qg/usxCr6n-DhY/s1600/19698.jpg)
Post by: Hellcatz on Thu, 26 March 2015, 13:34:30
Post by: mr.squishy on Thu, 26 March 2015, 14:40:43
**** that is one sexy mech. :thumb: please tell me u didn't make that.Those with sharp eyes will tell you that there are 2 different mechs shown :p :p :p :p
Post by: noisyturtle on Thu, 26 March 2015, 14:51:14
Lol thats MG price, almost as expensive as a Jegan D-type makes me cry every time making mass production suits exclusive :Idat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
The regular green frame Unicorn RX-0 is only slightly cheaper, and this one's a Japan 7-11 exclusive.
http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html (http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html)
Also found it on Amazon for $10 less
http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC (http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC)
Post by: Hellcatz on Thu, 26 March 2015, 14:56:04
Pffftttt I totally knew that :cool:**** that is one sexy mech. :thumb: please tell me u didn't make that.Those with sharp eyes will tell you that there are 2 different mechs shown :p :p :p :p
Post by: Fire Brand on Thu, 26 March 2015, 15:27:52
Your paying far too much although the shipping costs its like 1000 Yen for SALLol thats MG price, almost as expensive as a Jegan D-type makes me cry every time making mass production suits exclusive :Idat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
The regular green frame Unicorn RX-0 is only slightly cheaper, and this one's a Japan 7-11 exclusive.
http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html (http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html)
Also found it on Amazon for $10 less
http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC (http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC)
http://www.hlj.com/product/BAN989487/Gun
A HG is like $21 full armour unicorn
Post by: noisyturtle on Thu, 26 March 2015, 15:38:59
Your paying far too much although the shipping costs its like 1000 Yen for SALLol thats MG price, almost as expensive as a Jegan D-type makes me cry every time making mass production suits exclusive :Idat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
The regular green frame Unicorn RX-0 is only slightly cheaper, and this one's a Japan 7-11 exclusive.
http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html (http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html)
Also found it on Amazon for $10 less
http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC (http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC)
http://www.hlj.com/product/BAN989487/Gun
A HG is like $21 full armour unicorn
Whaaaaa! So basically buying in Japan is $10-20 cheaper than in the US.... even comparing to eBay prices factoring that shipping them from JAP or HK either takes 2+ months or costs $15+. That sucks for anyone not in Japan or China :(
Yup, after comparing their prices with US prices they all seem to be on average 25% cheaper including shipping costs on both sides. :-X
Post by: Fire Brand on Thu, 26 March 2015, 16:08:13
Yeah HLJ is a pretty good sight I buy most stuff from them, example for like 7 HG kits shipping it works out like 3000Yen for Fedex 3 day delivery, it pretty much always works out cheaper from a site like HLJ.com or Amiami.com Also keep a eye out as Bandi often do free parts with kits, last year it was a free weapon set with every HG kit bought I have like 20 of them sets >_>Your paying far too much although the shipping costs its like 1000 Yen for SALLol thats MG price, almost as expensive as a Jegan D-type makes me cry every time making mass production suits exclusive :Idat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
The regular green frame Unicorn RX-0 is only slightly cheaper, and this one's a Japan 7-11 exclusive.
http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html (http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html)
Also found it on Amazon for $10 less
http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC (http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC)
http://www.hlj.com/product/BAN989487/Gun
A HG is like $21 full armour unicorn
Whaaaaa! So basically buying in Japan is $10-20 cheaper than in the US.... even comparing to eBay prices factoring that shipping them from JAP or HK either takes 2+ months or costs $15+. That sucks for anyone not in Japan or China :(
Yup, after comparing their prices with US prices they all seem to be on average 25% cheaper including shipping costs on both sides. :-X
Post by: noisyturtle on Thu, 26 March 2015, 16:34:47
Yeah HLJ is a pretty good sight I buy most stuff from them, example for like 7 HG kits shipping it works out like 3000Yen for Fedex 3 day delivery, it pretty much always works out cheaper from a site like HLJ.com or Amiami.com Also keep a eye out as Bandi often do free parts with kits, last year it was a free weapon set with every HG kit bought I have like 20 of them sets >_>Your paying far too much although the shipping costs its like 1000 Yen for SALLol thats MG price, almost as expensive as a Jegan D-type makes me cry every time making mass production suits exclusive :Idat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
The regular green frame Unicorn RX-0 is only slightly cheaper, and this one's a Japan 7-11 exclusive.
http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html (http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html)
Also found it on Amazon for $10 less
http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC (http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC)
http://www.hlj.com/product/BAN989487/Gun
A HG is like $21 full armour unicorn
Whaaaaa! So basically buying in Japan is $10-20 cheaper than in the US.... even comparing to eBay prices factoring that shipping them from JAP or HK either takes 2+ months or costs $15+. That sucks for anyone not in Japan or China :(
Yup, after comparing their prices with US prices they all seem to be on average 25% cheaper including shipping costs on both sides. :-X
RIP wallet
Post by: mr.squishy on Thu, 26 March 2015, 17:23:19
I just spent all my money on server parts, I don't even have enough to get one of the like $14 ones for my first kitYeah HLJ is a pretty good sight I buy most stuff from them, example for like 7 HG kits shipping it works out like 3000Yen for Fedex 3 day delivery, it pretty much always works out cheaper from a site like HLJ.com or Amiami.com Also keep a eye out as Bandi often do free parts with kits, last year it was a free weapon set with every HG kit bought I have like 20 of them sets >_>Your paying far too much although the shipping costs its like 1000 Yen for SALLol thats MG price, almost as expensive as a Jegan D-type makes me cry every time making mass production suits exclusive :Idat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
The regular green frame Unicorn RX-0 is only slightly cheaper, and this one's a Japan 7-11 exclusive.
http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html (http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html)
Also found it on Amazon for $10 less
http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC (http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC)
http://www.hlj.com/product/BAN989487/Gun
A HG is like $21 full armour unicorn
Whaaaaa! So basically buying in Japan is $10-20 cheaper than in the US.... even comparing to eBay prices factoring that shipping them from JAP or HK either takes 2+ months or costs $15+. That sucks for anyone not in Japan or China :(
Yup, after comparing their prices with US prices they all seem to be on average 25% cheaper including shipping costs on both sides. :-X
RIP wallet
Post by: Fire Brand on Thu, 26 March 2015, 18:12:08
Go big or go homeYeah HLJ is a pretty good sight I buy most stuff from them, example for like 7 HG kits shipping it works out like 3000Yen for Fedex 3 day delivery, it pretty much always works out cheaper from a site like HLJ.com or Amiami.com Also keep a eye out as Bandi often do free parts with kits, last year it was a free weapon set with every HG kit bought I have like 20 of them sets >_>Your paying far too much although the shipping costs its like 1000 Yen for SALLol thats MG price, almost as expensive as a Jegan D-type makes me cry every time making mass production suits exclusive :Idat HG price doei need this for reasons.I FOUND ITShow Image(http://i385.photobucket.com/albums/oo300/leonography/modelkit/gundam711greenuni01_zps9f8399c9.jpg)Show Image(http://40.media.tumblr.com/7f4da0c98c523da83e0abe032ba32554/tumblr_n4ilwpREcb1ql4f9ao2_1280.jpg)
http://www.ebay.com/itm/HG-RX-0-Unicorn-Gundam-Destroy-Mode-kit-model-SEVEN-ELEVEN-Ltd-1-144-hguc-7-11-/371086251418?pt=LH_DefaultDomain_0&hash=item566676d59a
The regular green frame Unicorn RX-0 is only slightly cheaper, and this one's a Japan 7-11 exclusive.
http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html (http://www.gundamplanet.com/hguc-unicorn-gundam-destroy-mode-green-frame-ver.html)
Also found it on Amazon for $10 less
http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC (http://www.amazon.com/gp/offer-listing/B00K7WO8EU/ref=dp_olp_new?ie=UTF8&colid=3NMU5TUP6GJ2Z&condition=new&coliid=I18IN5HY4SLAIC)
http://www.hlj.com/product/BAN989487/Gun
A HG is like $21 full armour unicorn
Whaaaaa! So basically buying in Japan is $10-20 cheaper than in the US.... even comparing to eBay prices factoring that shipping them from JAP or HK either takes 2+ months or costs $15+. That sucks for anyone not in Japan or China :(
Yup, after comparing their prices with US prices they all seem to be on average 25% cheaper including shipping costs on both sides. :-X
RIP wallet
http://www.hlj.com/product/BAN962053/Gun
MG Unicorn Cost $40 more or less shipped and like twice the detail and size 10/10 would recommend
Post by: Fire Brand on Thu, 26 March 2015, 18:22:13
http://adf.ly/biYeg
Post by: jonathanyu on Thu, 26 March 2015, 21:50:15
Post by: Krytone on Thu, 26 March 2015, 22:49:09
Thinking between 00 or Red Astray :-\
Post by: hwood34 on Thu, 26 March 2015, 22:52:53
i am still longing to buy my first PG. :-Sastray all the way
Thinking between 00 or Red Astray :-\
Post by: jonathanyu on Fri, 27 March 2015, 01:06:18
i am still longing to buy my first PG. :-S
Thinking between 00 or Red Astray :-\
00 :-*
Post by: Krytone on Fri, 27 March 2015, 01:19:22
Post by: noisyturtle on Fri, 27 March 2015, 01:34:47
The Astray frames are ok I guess, but the rest are meh.
Neo Zeong looks like the most fun, plus it comes with a full-sized HG Sinanju that rides it. ****ing awesome!
Post by: jonathanyu on Fri, 27 March 2015, 01:50:06
TBH the only PG I like are the RX-0 and Strike Rouge, the rest either look too plain or have too much dumb **** on their backs :P
The Astray frames are ok I guess, but the rest are meh.
Neo Zeong looks like the most fun, plus it comes with a full-sized HG Sinanju that rides it. ****ing awesome!
I like those dumb **** :'(
Post by: noisyturtle on Fri, 27 March 2015, 17:38:44
This kit is HUGE, way bigger and more intricate than I thought. The color seperation is really cool though, there are 4 different shades of red so it already looks painted. So cool.
(http://i.imgur.com/a8YfmmQ.jpg)
waaaay too many microscopic waterslide decals though. i hate dealing with waterslides >:D
Post by: hwood34 on Fri, 27 March 2015, 19:22:01
This came in the mail today, Sazabi Ver Ka and ma tools ;Dnicee!
This kit is HUGE, way bigger and more intricate than I thought. The color seperation is really cool though, there are 4 different shades of red so it already looks painted. So cool.Show Image(http://i.imgur.com/a8YfmmQ.jpg)
waaaay too many microscopic waterslide decals though. i hate dealing with waterslides >:D
got my exia dark matter today too, got something to work on this weekend
Post by: Fire Brand on Fri, 27 March 2015, 19:55:17
This came in the mail today, Sazabi Ver Ka and ma tools ;DMhhh MG Hype train also are you going to be putting a titanium coating on that? it would look real nice O:
This kit is HUGE, way bigger and more intricate than I thought. The color seperation is really cool though, there are 4 different shades of red so it already looks painted. So cool.Show Image(http://i.imgur.com/a8YfmmQ.jpg)
waaaay too many microscopic waterslide decals though. i hate dealing with waterslides >:D
This is what I mean
Looks very fancy when finished :)
Post by: noisyturtle on Fri, 27 March 2015, 20:57:56
This came in the mail today, Sazabi Ver Ka and ma tools ;DMhhh MG Hype train also are you going to be putting a titanium coating on that? it would look real nice O:
This kit is HUGE, way bigger and more intricate than I thought. The color seperation is really cool though, there are 4 different shades of red so it already looks painted. So cool.Show Image(http://i.imgur.com/a8YfmmQ.jpg)
waaaay too many microscopic waterslide decals though. i hate dealing with waterslides >:D
This is what I mean
Looks very fancy when finished :)
I want a matt look for this guy, so I'm just going to do some matt Mr. Hobby and call it a day. Also considering this is my 1st gunpla build in 15 years I don't wanna do anything too out of my element.
nicee!
got my exia dark matter today too, got something to work on this weekend
Hell yeah, the Exia DM color way is really eye catching.
Post by: hwood34 on Fri, 27 March 2015, 21:09:38
you know, it looked like a really cool neon-y pink in the picks, but IRL it's most of a pinky-red. I'm gonna head down to the hobby store to find something to paint itnicee!
got my exia dark matter today too, got something to work on this weekend
Hell yeah, the Exia DM color way is really eye catching.
Post by: Evo_Spec on Sat, 28 March 2015, 23:04:16
Gundam's are so cheap and readily available here but i can't bring myself to build one without painting it....
Post by: Krytone on Sat, 28 March 2015, 23:20:33
This came in the mail today, Sazabi Ver Ka and ma tools ;D
This kit is HUGE, way bigger and more intricate than I thought. The color seperation is really cool though, there are 4 different shades of red so it already looks painted. So cool.Show Image(http://i.imgur.com/a8YfmmQ.jpg)
waaaay too many microscopic waterslide decals though. i hate dealing with waterslides >:D
wow, very nice! If i got this, there would be no time to take a picture and would directly go to assembling it. lol
Post by: noisyturtle on Sat, 25 April 2015, 17:07:53
http://gundamguy.blogspot.ca/2015/04/gundam-model-kit-bash-tiger-custom-build.html (http://gundamguy.blogspot.ca/2015/04/gundam-model-kit-bash-tiger-custom-build.html)
(https://i.imgur.com/ISQSP2k.jpg)
Post by: Binge on Sat, 25 April 2015, 17:35:56
Wanted to share this bit of awesome. Manyf kits sacrificed to make this Gundam Tiger:
http://gundamguy.blogspot.ca/2015/04/gundam-model-kit-bash-tiger-custom-build.html (http://gundamguy.blogspot.ca/2015/04/gundam-model-kit-bash-tiger-custom-build.html)Show Image(https://i.imgur.com/ISQSP2k.jpg)
I can appreciate this pretty kitty.
Post by: Blackehart on Sat, 25 April 2015, 21:38:23
Wanted to share this bit of awesome. Manyf kits sacrificed to make this Gundam Tiger:
http://gundamguy.blogspot.ca/2015/04/gundam-model-kit-bash-tiger-custom-build.html (http://gundamguy.blogspot.ca/2015/04/gundam-model-kit-bash-tiger-custom-build.html)Show Image(https://i.imgur.com/ISQSP2k.jpg)
Jealousy levels are OFF THE CHARTS!
Post by: Jokrik on Sun, 26 April 2015, 00:09:51
This came in the mail today, Sazabi Ver Ka and ma tools ;D
This kit is HUGE, way bigger and more intricate than I thought. The color seperation is really cool though, there are 4 different shades of red so it already looks painted. So cool.Show Image(http://i.imgur.com/a8YfmmQ.jpg)
waaaay too many microscopic waterslide decals though. i hate dealing with waterslides >:D
Any final picture?:)
been wanting to get one, but same problem as Evo since I promised myself if I ever get into Gundam again
I have to paint it...
Post by: noisyturtle on Sun, 26 April 2015, 00:44:02
This came in the mail today, Sazabi Ver Ka and ma tools ;D
This kit is HUGE, way bigger and more intricate than I thought. The color seperation is really cool though, there are 4 different shades of red so it already looks painted. So cool.Show Image(http://i.imgur.com/a8YfmmQ.jp)
waaaay too many microscopic waterslide decals though. i hate dealing with waterslides >:D
Any final picture?:)
been wanting to get one, but same problem as Evo since I promised myself if I ever get into Gundam again
I have to paint it...
Still working on it :(
I got this new contract that's been eating up my daytime, and when I get home I'm too lazy to do anything constructive. Aiming to have it built by the end of next week.... probably.
Post by: noisyturtle on Sun, 03 May 2015, 19:04:42
wtf is wrong with me?
Post by: tp4tissue on Sun, 03 May 2015, 21:47:54
Wanted to share this bit of awesome. Manyf kits sacrificed to make this Gundam Tiger:
http://gundamguy.blogspot.ca/2015/04/gundam-model-kit-bash-tiger-custom-build.html (http://gundamguy.blogspot.ca/2015/04/gundam-model-kit-bash-tiger-custom-build.html)Show Image(https://i.imgur.com/ISQSP2k.jpg)
Jealousy levels are OFF THE CHARTS!
This type of combination is only possible if you have a legacy of several hundred kits..
he is in Way deep..
You have to reach the point where you see model-kits as just plastic and formless.
Post by: Jokrik on Sun, 03 May 2015, 22:01:09
Can anyone explain to me why I keep buying more Gunpla kits when I still haven't even finished the one I started a month ago? I hope this doesn't wind up like keyboards where I have dozens of extra sets and caps I never use, but for some reason keep buying more. :-\I know why I keep wanting to buy one while I know that I won't have enough spare time due to work
wtf is wrong with me?
Instagram, have you seen nexus team work there? They're amazing
Post by: Lastpilot on Sun, 10 May 2015, 15:38:56
Post by: noisyturtle on Tue, 12 May 2015, 18:37:03
(http://i.imgur.com/84fhSSf.jpg)
not painting mine, but this is pretty sick inspiration right here:
(http://i.imgur.com/0m0SpHS.jpg)
(http://i.imgur.com/kPjvtFz.jpg)
Post by: Evo_Spec on Tue, 12 May 2015, 22:15:23
This thread is tempting me to spend more money that I want to.... I had a bit of airbrushing stuff back home in Canada too.....
Post by: tp4tissue on Tue, 12 May 2015, 22:55:41
Why is no one painting here! It looks so much better even if it's just one color
This thread is tempting me to spend more money that I want to.... I had a bit of airbrushing stuff back home in Canada too.....
The trouble with painting is the huge upfront cost with compressor, paints, mixers, putty, primer, base coat, gloss.
It's way way worse than keyboards.
Post by: Evo_Spec on Tue, 12 May 2015, 23:16:46
That's the upsetting part, I have all this stuff in Canada already...Why is no one painting here! It looks so much better even if it's just one color
This thread is tempting me to spend more money that I want to.... I had a bit of airbrushing stuff back home in Canada too.....
The trouble with painting is the huge upfront cost with compressor, paints, mixers, putty, primer, base coat, gloss.
It's way way worse than keyboards.
Post by: noisyturtle on Tue, 12 May 2015, 23:22:46
I'd rather just pay someone else to do a much better job at a fraction of the cost, but I'll probably have the waterslides on it before that happens too :))
Post by: Evo_Spec on Wed, 13 May 2015, 03:29:00
Post by: Matt3o on Wed, 13 May 2015, 03:34:50
Post by: Evo_Spec on Wed, 13 May 2015, 04:15:13
there's something I don't quite understand. These models seem that can be positioned in various stances, how can you paint them if the joints are movable? Do people glue the joints?Well you build them so you just paint the parts before assembling them, I don't really remember how the joints were but I'm pretty sure that you don't paint those.
Post by: Dee1 on Wed, 13 May 2015, 08:50:00
Why is no one painting here! It looks so much better even if it's just one colorPersonally, I don't paint because I can never be bothered to start trying it. The sad part is that I have the airbrush and compressor and the brushes on hand already. I just need to go to the local hobby shop to get the paint/primer/gloss/etc and I could start anytime I wanted.
Post by: tp4tissue on Wed, 13 May 2015, 11:17:07
That's the upsetting part, I have all this stuff in Canada already...Why is no one painting here! It looks so much better even if it's just one color
This thread is tempting me to spend more money that I want to.... I had a bit of airbrushing stuff back home in Canada too.....
The trouble with painting is the huge upfront cost with compressor, paints, mixers, putty, primer, base coat, gloss.
It's way way worse than keyboards.
(http://www.msgking.com/wp-content/uploads/2010/03/onion-avatar039.gif)
Damn you rich people.. Tp4 wish he could afford all that stuff to paint models.
Post by: Evo_Spec on Wed, 13 May 2015, 17:24:25
Ramen diet good sir.That's the upsetting part, I have all this stuff in Canada already...Why is no one painting here! It looks so much better even if it's just one color
This thread is tempting me to spend more money that I want to.... I had a bit of airbrushing stuff back home in Canada too.....
The trouble with painting is the huge upfront cost with compressor, paints, mixers, putty, primer, base coat, gloss.
It's way way worse than keyboards.Show Image(http://www.msgking.com/wp-content/uploads/2010/03/onion-avatar039.gif)
Damn you rich people.. Tp4 wish he could afford all that stuff to paint models.
But actually it was because I used to work in hobby shop and bought things at cost so I just kind of bought whatever I thought I might use.
Post by: Xowie on Thu, 14 May 2015, 17:27:28
Post by: tp4tissue on Thu, 14 May 2015, 17:57:05
I have built a couple of Gundams (was one of my favorite shows growing up). I also really like zoids but they are hard to find/expensive now.
If we WERE to build actual robots to ride around in.. Zoids would be more realistic than Gundams..
Gundams are tall and lanky for NO good REASON..
Post by: hwood34 on Thu, 14 May 2015, 18:09:25
And with incredibly disproportionately long legs...I have built a couple of Gundams (was one of my favorite shows growing up). I also really like zoids but they are hard to find/expensive now.
If we WERE to build actual robots to ride around in.. Zoids would be more realistic than Gundams..
Gundams are tall and lanky for NO good REASON..
(at least all the ones I've had)
Post by: tp4tissue on Thu, 14 May 2015, 20:18:15
And with incredibly disproportionately long legs...I have built a couple of Gundams (was one of my favorite shows growing up). I also really like zoids but they are hard to find/expensive now.
If we WERE to build actual robots to ride around in.. Zoids would be more realistic than Gundams..
Gundams are tall and lanky for NO good REASON..
(at least all the ones I've had)
At least they got the giant-feet right.. That part is necessary.. hahaha...
Post by: Evo_Spec on Thu, 14 May 2015, 23:11:16
I have built a couple of Gundams (was one of my favorite shows growing up). I also really like zoids but they are hard to find/expensive now.I was quite spoiled by my step father in Japan at this point in my my life and I remember building tons of zoids, a couple of them were massive too. I wonder how much those were....
Post by: Krytone on Mon, 25 May 2015, 01:20:34
Also, most of the kits that are painted are atleast MG grade. No point painting HG since the details are not that great. MG grades all have skeletons which is used for the joints and moving parts. It would be covered by an armor and that is what is painted in the kit.
Post by: filphil on Mon, 25 May 2015, 01:31:48
(http://imgur.com/bBHXRFg.jpg)
I'll try to snap up pics of the end product.
Post by: Xowie on Mon, 25 May 2015, 08:25:22
Glad to see other gunpla and mech fans here. My backlog is huge but this is my most recently completed kit before waterslides:Wow, that looks great!Show Image(http://imgur.com/bBHXRFg.jpg)
I'll try to snap up pics of the end product.
That's why I'd never consider painting. Not that it doesn't look great, just too much upfront cost for what would amount to painting a few toys. And who knows how many times I'd actually use it, plus the cost and waste of buying paint for such small projects.This is pretty much my thought as well (although I have been tempted many times to make that investment)
Post by: filphil on Mon, 25 May 2015, 21:38:15
Depending on where you live I could recommend an inexpensive setup to begin painting. Building and completing a project has its own merits and feeling of satisfaction though so it's up to the user to determine the worth
Post by: hwood34 on Thu, 04 June 2015, 12:23:21
tfw you want to paint but...
Post by: dndlmx on Thu, 04 June 2015, 13:04:52
Post by: hwood34 on Thu, 04 June 2015, 13:16:50
This might be a fun little activity I just never watched much gun dam beyond wing. :-[Yeah, it's really fun to do and the final piece is cool to look at
Post by: Fire Brand on Thu, 04 June 2015, 13:16:59
This might be a fun little activity I just never watched much gun dam beyond wing. :-[Can I suggest 8th MS team its pretty short and very good :) or if you like newer animation style Gundam unicorn would be good, or even Gundam 00 :)
Post by: dndlmx on Thu, 04 June 2015, 13:22:14
Yeah, it's really fun to do and the final piece is cool to look at
I have "a little" airbrush experience, I could probly pull off a sorta decent looking model.
Can I suggest 8th MS team its pretty short and very good :) or if you like newer animation style Gundam unicorn would be good, or even Gundam 00 :)
Thanks. I think I watched some Seed also but in nipponese...
Post by: hwood34 on Thu, 04 June 2015, 14:07:47
shot before it gets coated and reassembled. got to practice weathering
Post by: starscream on Thu, 04 June 2015, 16:07:04
(http://www.gunjap.net/site/wp-content/uploads/2012/10/12116.jpg)
Post by: Evo_Spec on Thu, 04 June 2015, 19:27:14
Do people still like Zoids? :cool:Show Image(http://www.gunjap.net/site/wp-content/uploads/2012/10/12116.jpg)
argh, i had so many as a kid but moved back to Canada and didn't bring them with me.....
Post by: filphil on Fri, 05 June 2015, 09:05:27
Do people still like Zoids? :cool:Show Image(http://www.gunjap.net/site/wp-content/uploads/2012/10/12116.jpg)
It never left buddy
Post by: hwood34 on Sat, 06 June 2015, 12:06:03
got around to coating today finally
Post by: Fire Brand on Sat, 06 June 2015, 14:46:10
Is that the MG dark matter as it looks rather small if so, looking good though if you wanted to do a metalic paint job you can paint all the red parts silver then paint clear red over them giving it a nice, titanium looking finish :)Show Image(http://i.imgur.com/WO3eiM5.jpg)
got around to coating today finally
Also just looked the sword is nice, did you add the nicks in it as that looks very nice if so
Post by: hwood34 on Sat, 06 June 2015, 14:51:22
Yep. I tried going for a beat up look, the shoulder plates got the worst of it thoughIs that the MG dark matter as it looks rather small if so, looking good though if you wanted to do a metalic paint job you can paint all the red parts silver then paint clear red over them giving it a nice, titanium looking finish :)Show Image(http://i.imgur.com/WO3eiM5.jpg)
got around to coating today finally
Also just looked the sword is nice, did you add the nicks in it as that looks very nice if so
. Once I get more into the hobby maybe I'll invest in an airbrush.
Post by: dndlmx on Mon, 08 June 2015, 18:50:43
Post by: hwood34 on Tue, 09 June 2015, 15:29:45
Whats like a super epic gun dam if I decide to try 1 or 2 of these. ;DWhatever looks good to you man :thumb: An easy way to browse is on any gundam site or ebay, just refine to whatever grade you want (you'll probably want to start with a high grade) and see what catches your eye.
On another note here's the exia dark matter w/ a matte coat:
(https://c1.staticflickr.com/1/344/18030011383_708052d06e_b.jpg) (https://flic.kr/p/ttfwee)
002 (https://flic.kr/p/ttfwee) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/1/356/18645899802_fbcb05cab7_b.jpg) (https://flic.kr/p/upF7p5)
011 (https://flic.kr/p/upF7p5) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
More
(https://c1.staticflickr.com/1/326/18652914921_f012df1514_b.jpg) (https://flic.kr/p/uqi4Kp)
003 (https://flic.kr/p/uqi4Kp) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/9/8841/18650647985_c997a0f5db_b.jpg) (https://flic.kr/p/uq6rSi)
004 (https://flic.kr/p/uq6rSi) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/9/8891/18624281956_7ddff8aa2f_b.jpg) (https://flic.kr/p/unLjaA)
006 (https://flic.kr/p/unLjaA) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/1/412/18624264476_6abfe79807_b.jpg) (https://flic.kr/p/unLdYd)
007 (https://flic.kr/p/unLdYd) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
003 (https://flic.kr/p/uqi4Kp) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/9/8841/18650647985_c997a0f5db_b.jpg) (https://flic.kr/p/uq6rSi)
004 (https://flic.kr/p/uq6rSi) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/9/8891/18624281956_7ddff8aa2f_b.jpg) (https://flic.kr/p/unLjaA)
006 (https://flic.kr/p/unLjaA) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/1/412/18624264476_6abfe79807_b.jpg) (https://flic.kr/p/unLdYd)
007 (https://flic.kr/p/unLdYd) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
and the sengoku astray before stickers and coating:
(https://c1.staticflickr.com/9/8847/18462852910_514e38af92_b.jpg) (https://flic.kr/p/u8uWWb)
021 (https://flic.kr/p/u8uWWb) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
Post by: tp4tissue on Tue, 09 June 2015, 15:31:16
Show ImageShow ImageShow ImageShow ImageShow ImageShow ImageWhats like a super epic gun dam if I decide to try 1 or 2 of these. ;DWhatever looks good to you man :thumb: An easy way to browse is on any gundam site or ebay, just refine to whatever grade you want (you'll probably want to start with a high grade) and see what catches your eye.
On another note here's the exia dark matter w/ a matte coat:
(https://c1.staticflickr.com/1/344/18030011383_708052d06e_b.jpg) (https://flic.kr/p/ttfwee)
002 (https://flic.kr/p/ttfwee) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/1/356/18645899802_fbcb05cab7_b.jpg) (https://flic.kr/p/upF7p5)
011 (https://flic.kr/p/upF7p5) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on FlickrMore(https://c1.staticflickr.com/1/326/18652914921_f012df1514_b.jpg) (https://flic.kr/p/uqi4Kp)
003 (https://flic.kr/p/uqi4Kp) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/9/8841/18650647985_c997a0f5db_b.jpg) (https://flic.kr/p/uq6rSi)
004 (https://flic.kr/p/uq6rSi) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/9/8891/18624281956_7ddff8aa2f_b.jpg) (https://flic.kr/p/unLjaA)
006 (https://flic.kr/p/unLjaA) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/1/412/18624264476_6abfe79807_b.jpg) (https://flic.kr/p/unLdYd)
007 (https://flic.kr/p/unLdYd) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
and the sengoku astray before stickers and coating:
(https://c1.staticflickr.com/9/8847/18462852910_514e38af92_b.jpg) (https://flic.kr/p/u8uWWb)
021 (https://flic.kr/p/u8uWWb) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
Hrrm.. are you not going to gloss those up? the red looks a bit flat, at least in sunlight..
Post by: hwood34 on Tue, 09 June 2015, 15:34:22
used a matte paint for that one. Just figured if it was meant to be straight out of battle it wouldn't be sparkling clean and shiny :P. The sengoku will be uv cut glossShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageWhats like a super epic gun dam if I decide to try 1 or 2 of these. ;DWhatever looks good to you man :thumb: An easy way to browse is on any gundam site or ebay, just refine to whatever grade you want (you'll probably want to start with a high grade) and see what catches your eye.
On another note here's the exia dark matter w/ a matte coat:
(https://c1.staticflickr.com/1/344/18030011383_708052d06e_b.jpg) (https://flic.kr/p/ttfwee)
002 (https://flic.kr/p/ttfwee) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/1/356/18645899802_fbcb05cab7_b.jpg) (https://flic.kr/p/upF7p5)
011 (https://flic.kr/p/upF7p5) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on FlickrMore(https://c1.staticflickr.com/1/326/18652914921_f012df1514_b.jpg) (https://flic.kr/p/uqi4Kp)
003 (https://flic.kr/p/uqi4Kp) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/9/8841/18650647985_c997a0f5db_b.jpg) (https://flic.kr/p/uq6rSi)
004 (https://flic.kr/p/uq6rSi) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/9/8891/18624281956_7ddff8aa2f_b.jpg) (https://flic.kr/p/unLjaA)
006 (https://flic.kr/p/unLjaA) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
(https://c1.staticflickr.com/1/412/18624264476_6abfe79807_b.jpg) (https://flic.kr/p/unLdYd)
007 (https://flic.kr/p/unLdYd) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
and the sengoku astray before stickers and coating:
(https://c1.staticflickr.com/9/8847/18462852910_514e38af92_b.jpg) (https://flic.kr/p/u8uWWb)
021 (https://flic.kr/p/u8uWWb) by Harwood Wolfson (https://www.flickr.com/photos/129179817@N07/), on Flickr
Hrrm.. are you not going to gloss those up? the red looks a bit flat, at least in sunlight..
Post by: hwood34 on Fri, 19 June 2015, 02:45:17
Post by: filphil on Fri, 19 June 2015, 08:34:32
(http://i.imgur.com/ZwqgQHU.jpg)
Post by: Invaderevan on Fri, 19 June 2015, 08:38:18
Post by: filphil on Fri, 19 June 2015, 08:41:04
Nice! I was super into these when I was young. It was one of my main life regrets though, I spent 10 days in Japan when I was like 14, visiting a friend, and all I wanted to do was look for models... total waste of time :/
You live and learn, friend. What matters though is that you, hopefully, had fun in the search. :D
Post by: SL89 on Fri, 19 June 2015, 08:45:00
Round 4 SPH (Blue) + Round 5 Honey (White + Red) + Yellow? = RX78 SA Keycaps
(http://deskthority.net/resources/image/22015)
All it needs is some more red, and a little bit of yellow.
Post by: hwood34 on Sun, 21 June 2015, 01:46:14
Post by: filphil on Mon, 22 June 2015, 01:02:48
Ok I reeeeaaaalllly need a PG Unicorn like now. Amazon's tempting me :))
Just a pg unicorn? Go deep and get led unit and full armor p-bandai set :thumb:
Post by: hwood34 on Mon, 22 June 2015, 01:03:57
oh well duh LED kit. if you don't get that why even botherOk I reeeeaaaalllly need a PG Unicorn like now. Amazon's tempting me :))
Just a pg unicorn? Go deep and get led unit and full armor p-bandai set :thumb:
Post by: filphil on Mon, 22 June 2015, 01:08:58
Ok I reeeeaaaalllly need a PG Unicorn like now. Amazon's tempting me :))
Just a pg unicorn? Go deep and get led unit and full armor p-bandai set :thumb:
oh well duh LED kit. if you don't get that why even bother
I wish I had another full armor set to hook you up with . I mean I did but someone in my house tossed my extra set. =/
Post by: hwood34 on Mon, 22 June 2015, 01:11:05
Ok I reeeeaaaalllly need a PG Unicorn like now. Amazon's tempting me :))
Just a pg unicorn? Go deep and get led unit and full armor p-bandai set :thumb:
oh well duh LED kit. if you don't get that why even bother
I wish I had another full armor set to hook you up with . I mean I did but someone in my house tossed my extra set. =/
how does someone even do that?
Post by: filphil on Mon, 22 June 2015, 01:13:59
Ok I reeeeaaaalllly need a PG Unicorn like now. Amazon's tempting me :))
Just a pg unicorn? Go deep and get led unit and full armor p-bandai set :thumb:
oh well duh LED kit. if you don't get that why even bother
I wish I had another full armor set to hook you up with . I mean I did but someone in my house tossed my extra set. =/
how does someone even do that?
Big box with the set all the way on the bottom and a bunch of different kinds of packing material on the top. Even though the set is large, as in a big as a pg mk ii box, it's deceptively light. So someone put it out when garbage collection happened and I never saw it again. Lol
Post by: hwood34 on Mon, 22 June 2015, 01:19:39
Ok I reeeeaaaalllly need a PG Unicorn like now. Amazon's tempting me :))
Just a pg unicorn? Go deep and get led unit and full armor p-bandai set :thumb:
oh well duh LED kit. if you don't get that why even bother
I wish I had another full armor set to hook you up with . I mean I did but someone in my house tossed my extra set. =/
how does someone even do that?
Big box with the set all the way on the bottom and a bunch of different kinds of packing material on the top. Even though the set is large, as in a big as a pg mk ii box, it's deceptively light. So someone put it out when garbage collection happened and I never saw it again. Lol
(http://i99.beon.ru/25.media.tumblr.com/623083769993e03bdc68bbfb3e2928b5/tumblr_mlmovsjYkm1soc51zo2_500.gif)
Post by: filphil on Tue, 23 June 2015, 23:07:14
It's happening
Post by: skycrimes on Thu, 02 July 2015, 13:39:46
Post by: hwood34 on Thu, 02 July 2015, 14:02:24
I've always wanted to get more into the gundam building. Do you guys watch the show a lot or do you just like the models?I've never actually gotten into the shows, I might have to sometime
Post by: skycrimes on Thu, 02 July 2015, 14:42:18
Post by: hwood34 on Thu, 02 July 2015, 14:59:58
I used to watch it when it first came on toonami (gundam wing) and then the season with the golden suits(?) but I feel like I'm missing out on a series with so much.oh god not dubbed
Post by: Fire Brand on Thu, 02 July 2015, 15:20:29
Got a MG Zaku II on its way for a paintjob at some point too :X
Post by: romevi on Thu, 02 July 2015, 15:56:37
I've built about 10 and love the whole process, yet I've never seen even a single episode.I've always wanted to get more into the gundam building. Do you guys watch the show a lot or do you just like the models?I've never actually gotten into the shows, I might have to sometime
My favorite designs are from the Astray line.
Post by: VentureG on Thu, 02 July 2015, 17:44:42
My first airbrush and compressor only costed 100 bucks. A used Testors AC100 and a Iwata Neo CN. The paint is a big upfront cost as well but a batch of well selected paints will last you many kits. The more concerning part about painting is work space availability as some paints can be toxic and all of them spray particles everywhere which can be difficult to deal with if you don't have proper ventilation.
My most recently finished build was the MG Char's Zaku!
(http://i.imgur.com/TgOBDQF.jpg)
If you're interested in any of the techniques used take a look at the WIP Album (http://imgur.com/gallery/ofzr1) and some more finished images (http://imgur.com/a/ZH8kS)
Post by: tp4tissue on Thu, 02 July 2015, 18:01:29
Glad to see more Gunpla lovers here. Nice to see some familiar faces as well :)
My first airbrush and compressor only costed 100 bucks. A used Testors AC100 and a Iwata Neo CN. The paint is a big upfront cost as well but a batch of well selected paints will last you many kits. The more concerning part about painting is work space availability as some paints can be toxic and all of them spray particles everywhere which can be difficult to deal with if you don't have proper ventilation.
My most recently finished build was the MG Char's Zaku!Show Image(http://i.imgur.com/TgOBDQF.jpg)
If you're interested in any of the techniques used take a look at the WIP Album (http://imgur.com/gallery/ofzr1) and some more finished images (http://imgur.com/a/ZH8kS)
(http://www.cute-factor.com/images/smilies/onion/th_090_.gif)
It's so.. Weathered....
Post by: filphil on Thu, 02 July 2015, 19:53:50
Glad to see more Gunpla lovers here. Nice to see some familiar faces as well :)
My first airbrush and compressor only costed 100 bucks. A used Testors AC100 and a Iwata Neo CN. The paint is a big upfront cost as well but a batch of well selected paints will last you many kits. The more concerning part about painting is work space availability as some paints can be toxic and all of them spray particles everywhere which can be difficult to deal with if you don't have proper ventilation.
My most recently finished build was the MG Char's Zaku!Show Image(http://i.imgur.com/TgOBDQF.jpg)
If you're interested in any of the techniques used take a look at the WIP Album (http://imgur.com/gallery/ofzr1) and some more finished images (http://imgur.com/a/ZH8kS)
Familiar faces, eh? Had no idea you'd be in to mech boards as well. :)
Post by: hwood34 on Thu, 02 July 2015, 20:20:59
Glad to see more Gunpla lovers here. Nice to see some familiar faces as well :)
My first airbrush and compressor only costed 100 bucks. A used Testors AC100 and a Iwata Neo CN. The paint is a big upfront cost as well but a batch of well selected paints will last you many kits. The more concerning part about painting is work space availability as some paints can be toxic and all of them spray particles everywhere which can be difficult to deal with if you don't have proper ventilation.
My most recently finished build was the MG Char's Zaku!Show Image(http://i.imgur.com/TgOBDQF.jpg)
If you're interested in any of the techniques used take a look at the WIP Album (http://imgur.com/gallery/ofzr1) and some more finished images (http://imgur.com/a/ZH8kS)
Wow, that is some seriously impressive work man
Post by: VentureG on Thu, 02 July 2015, 21:12:31
Familiar faces, eh? Had no idea you'd be in to mech boards as well. :)
I didn't know I was into mechs until last year. Getting close to getting all the parts for a custom :D
Wow, that is some seriously impressive work man
Thanks man! Your photography is ridiculously nice :-X
My current project is almost done!
(http://i.imgur.com/wz7v1vO.jpg)
Post by: Xowie on Wed, 08 July 2015, 16:22:14
[attach=1]
Here is a size comparison with a fire fox:
[attach=2]
I really love the color scheme...the shade of blue is wonderful.
Post by: filphil on Wed, 08 July 2015, 20:16:00
Received and built a Konig Wolf HA yesterday (it has been on my wishlist for a while...!)
(Attachment Link)
Here is a size comparison with a fire fox:
(Attachment Link)
I really love the color scheme...the shade of blue is wonderful.
IDK if I've ever seen a zoid kit that was really bad yet.
Sister has this sitting in her room waiting to be built. I wanna build it so bad.
(https://reggiocomics.files.wordpress.com/2010/06/925.jpg)
Post by: hwood34 on Wed, 08 July 2015, 20:17:23
Received and built a Konig Wolf HA yesterday (it has been on my wishlist for a while...!)
(Attachment Link)
Here is a size comparison with a fire fox:
(Attachment Link)
I really love the color scheme...the shade of blue is wonderful.
IDK if I've ever seen a zoid kit that was really bad yet.
Sister has this sitting in her room waiting to be built. I wanna build it so bad.Show Image(https://reggiocomics.files.wordpress.com/2010/06/925.jpg)
Yea well let her now I'm always willing to take it off her hands ;)
Post by: RoastPotatoes on Wed, 08 July 2015, 22:52:25
Post by: romevi on Thu, 09 July 2015, 00:07:57
As someone who has not built a gundam model before, is this any good? http://plamoya.com/en/tengen-kadou-gurren-lagann-full-drillize-ver-plastic-model-p-52835.html
Haven't seen that one before, but it's by Kotobukiya so you can't go wrong.
Bandai is the king of model kits, and Kotobukiya is a strong runner-up. The only others Koto kits I've built were the Rockman ones, though I've got my eyes set on the EVAs.
That said, the best places to get Gunpla from, besides your local hobby shop, are AmiAmi or HLJ if you're importing, or else Gundam Planet or, if directly by Bluefin, Amazon. Keep in mind that the boxes are HUGE, so shipping will add up. It's best to get a few kits at once than one at a time.
Post by: Happylomo on Sun, 12 July 2015, 09:18:43
Post by: skycrimes on Thu, 16 July 2015, 10:45:19
think this is something a beginner can make :o?
Post by: romevi on Thu, 16 July 2015, 10:49:35
http://www.amazon.com/Gundam-MBF-P02KAI-Astray-Frame-Scale/dp/B0032ZD5O8
think this is something a beginner can make :o?
Wow, that looks gorgeous. I'd say go for it, but be patient.
HG model kits are geared more toward beginners, but they're smaller and, oddly enough, I find them more difficult to work with because of the tiny pieces. MGs just have more pieces, are bigger, and take longer to build, but I don't think they're more complicated.
Post by: skycrimes on Thu, 16 July 2015, 10:52:31
http://www.amazon.com/Gundam-MBF-P02KAI-Astray-Frame-Scale/dp/B0032ZD5O8
think this is something a beginner can make :o?
Wow, that looks gorgeous. I'd say go for it, but be patient.
HG model kits are geared more toward beginners, but they're smaller and, oddly enough, I find them more difficult to work with because of the tiny pieces. MGs just have more pieces, are bigger, and take longer to build, but I don't think they're more complicated.
yeah I recently found it. I used to think there was only a set number of models (all from gundam wing because thats how I got into the mechs). But I've come to find theres a lot more :)
Post by: hwood34 on Mon, 03 August 2015, 19:52:55
Post by: eddie on Mon, 03 August 2015, 20:09:54
Post by: filphil on Mon, 03 August 2015, 20:54:16
pg unicorn dreams have come true :D
:)
Post by: Fire Brand on Tue, 04 August 2015, 03:56:28
pg unicorn dreams have come true :DYou bought it? O>O
Or where you just saying it about the PG banshee :x
Post by: hwood34 on Thu, 06 August 2015, 15:20:27
pg unicorn dreams have come true :DYou bought it? O>O
Yessir, get to pick it up myself too :)
Post by: Fire Brand on Thu, 06 August 2015, 16:50:27
Daaaaang you need to make sure you wire the led's into that take lots of pictures just of the packaging tbh O>O hope you have fun building it though ^_^pg unicorn dreams have come true :DYou bought it? O>O
Yessir, get to pick it up myself too :)
Also Evo on here has kindly said he will proxy the new 1/100 MG Jesta Cannon exclusive <3 I love Evo GM/Grunts are my jam but sad they have yet to release a MG Jegan :c
Post by: hwood34 on Mon, 10 August 2015, 11:26:02
(https://farm1.staticflickr.com/313/19838971164_5084e87809_c.jpg) (https://flic.kr/p/we6UWY)
no bananas around so lemon for scale. pulling out the extra desk for this one:
(https://farm1.staticflickr.com/279/20453132632_f1d2055603_c.jpg) (https://flic.kr/p/xanDKN)
(https://farm1.staticflickr.com/415/20273719020_e958573c7b_c.jpg) (https://flic.kr/p/wTw7kE)
Post by: Fire Brand on Mon, 10 August 2015, 13:23:53
Show Image
Show Image
got to meet up with filphil on my way back from NY to pick up these :D
(https://farm1.staticflickr.com/313/19838971164_5084e87809_c.jpg) (https://flic.kr/p/we6UWY)
no bananas around so lemon for scale. pulling out the extra desk for this one:
(https://farm1.staticflickr.com/279/20453132632_f1d2055603_c.jpg) (https://flic.kr/p/xanDKN)
(https://farm1.staticflickr.com/415/20273719020_e958573c7b_c.jpg) (https://flic.kr/p/wTw7kE)
Not one but 2 PG's my god, I would hate you be your side cutters after that will be fun building it but don't try do it in one day :p
Post by: hwood34 on Mon, 10 August 2015, 16:23:29
(https://farm4.staticflickr.com/3792/20459584922_bc2ef980da_c.jpg) (https://flic.kr/p/xaWHNb)
Post by: Fire Brand on Mon, 10 August 2015, 17:02:55
body doneLooking good so far, did you get the led unit or planning to light it?
(https://farm4.staticflickr.com/3792/20459584922_bc2ef980da_c.jpg) (https://flic.kr/p/xaWHNb)
Post by: hwood34 on Mon, 10 August 2015, 17:07:15
Nope, wasn't about to drop $80 on some LEDs. Frankly I'll probly keep it all white all the time anyway, I like that look a lot morebody doneLooking good so far, did you get the led unit or planning to light it?
(https://farm4.staticflickr.com/3792/20459584922_bc2ef980da_c.jpg) (https://flic.kr/p/xaWHNb)
Post by: Fire Brand on Mon, 10 August 2015, 17:34:22
:p What about just hand wiring it all up?Nope, wasn't about to drop $80 on some LEDs. Frankly I'll probly keep it all white all the time anyway, I like that look a lot morebody doneLooking good so far, did you get the led unit or planning to light it?
(https://farm4.staticflickr.com/3792/20459584922_bc2ef980da_c.jpg) (https://flic.kr/p/xaWHNb)
Post by: hwood34 on Mon, 10 August 2015, 17:38:20
:p What about just hand wiring it all up?Nope, wasn't about to drop $80 on some LEDs. Frankly I'll probly keep it all white all the time anyway, I like that look a lot morebody doneLooking good so far, did you get the led unit or planning to light it?
(https://farm4.staticflickr.com/3792/20459584922_bc2ef980da_c.jpg) (https://flic.kr/p/xaWHNb)
I'm not super electrically inclined with that sort of thing :p. If you wanna hookup me up tho ;)
Post by: Fire Brand on Mon, 10 August 2015, 17:41:13
Ahh right never mind then :p No I don't have anyone but there are quite a few tutorials on youtube for lighting up gunpla kits :):p What about just hand wiring it all up?Nope, wasn't about to drop $80 on some LEDs. Frankly I'll probly keep it all white all the time anyway, I like that look a lot morebody doneLooking good so far, did you get the led unit or planning to light it?
(https://farm4.staticflickr.com/3792/20459584922_bc2ef980da_c.jpg) (https://flic.kr/p/xaWHNb)
I'm not super electrically inclined with that sort of thing :p. If you wanna hookup me up tho ;)
Post by: hwood34 on Tue, 11 August 2015, 00:49:50
(https://farm1.staticflickr.com/383/20291562229_8c66caa18c_c.jpg) (https://flic.kr/p/wV6yvc)
Post by: eddie on Tue, 11 August 2015, 00:58:50
The day's work: torso and both legs:
(https://farm1.staticflickr.com/383/20291562229_8c66caa18c_c.jpg) (https://flic.kr/p/wV6yvc)
so jealous :-X :-X :-X
Post by: hwood34 on Wed, 12 August 2015, 17:38:09
Now just need to finish up all the weapons, detail, sticker, and coat
Post by: romevi on Wed, 12 August 2015, 17:43:32
Post by: hwood34 on Wed, 12 August 2015, 17:45:05
Ugh. Can't wait to get my first PG, which'll be the Red Astray. Have to get myself comfortable with enough MGs first.
I only did 2 MGs before this :p. Red astray tho :cool:
Post by: hwood34 on Thu, 13 August 2015, 21:15:56
Post by: noisyturtle on Fri, 14 August 2015, 19:58:59
Denial Gundam
(http://i.imgur.com/GWDpVZA.jpg)
(http://i.imgur.com/qQqCorj.jpg)
Post by: Happylomo on Sat, 15 August 2015, 00:10:42
I made a thing a few weeks ago.Show Image(http://i.imgur.com/qQqCorj.jpg)
Using the modelling board as a backdrop seems to be a very good idea! :thumb:
Btw, here's my finished Freedom.
(http://i.imgur.com/GuBwSjJ.jpg)
(http://i.imgur.com/J3Ec4cM.jpg)
Post by: hwood34 on Sat, 12 September 2015, 23:06:45
(https://farm1.staticflickr.com/729/21372632775_a78ff29bd8_b.jpg) (https://flic.kr/p/yyCk7x)
Post by: VentureG on Sun, 29 November 2015, 18:19:56
(http://i.imgur.com/VAp3ZJc.jpg)
Post by: Happylomo on Sun, 29 November 2015, 19:37:40
Moving on to the funnels. This guys gonna be my winter project!
Show Image(http://i.imgur.com/VAp3ZJc.jpg)
Ohh, an RX 93! U gotta ink that machine, bro! Or amuro will be pissed. ;D
nice build btw :thumb:
Post by: VentureG on Mon, 30 November 2015, 06:53:25
Post by: filphil on Mon, 30 November 2015, 08:15:03
(http://i.imgur.com/W9gGtZT.jpg)
(http://i.imgur.com/aH0MvWY.jpg)
Post by: skycrimes on Mon, 30 November 2015, 11:21:12
Post by: romevi on Mon, 30 November 2015, 11:30:12
So I just got a real grade Astray Red but I'm to afraid to start on it. What is the best way of removing individual pieces from their trays without breaking them?
Snip close to the runner and cut the rest of the nub off with a hobby knife.
Post by: skycrimes on Mon, 30 November 2015, 11:38:52
So I just got a real grade Astray Red but I'm to afraid to start on it. What is the best way of removing individual pieces from their trays without breaking them?
Snip close to the runner and cut the rest of the nub off with a hobby knife.
awesome thanks, I'll need to get a hold on some tools then! no point in this model just sitting around.
Post by: romevi on Mon, 30 November 2015, 11:49:52
So I just got a real grade Astray Red but I'm to afraid to start on it. What is the best way of removing individual pieces from their trays without breaking them?
Snip close to the runner and cut the rest of the nub off with a hobby knife.
awesome thanks, I'll need to get a hold on some tools then! no point in this model just sitting around.
The God Hand is the best nib cutter, but a bit expensive. A Tamiya one is a very good beginner's cutter. Then an Xacto is fine for cutting off the remainder, then sand it off. It's been a couple of years since I last built a Gunpla, so I forget which grits to get. I think 600 as the starting point? Someone here can give better info.
Post by: filphil on Mon, 30 November 2015, 12:28:50
So I just got a real grade Astray Red but I'm to afraid to start on it. What is the best way of removing individual pieces from their trays without breaking them?
Snip close to the runner and cut the rest of the nub off with a hobby knife.
awesome thanks, I'll need to get a hold on some tools then! no point in this model just sitting around.
For the budget friendly with good quality:
http://www.amazon.com/Xuron-2175ET-Professional-Sprue-Cutter/dp/B001TMZ7QA/ref=sr_1_7?ie=UTF8&qid=1448907805&sr=8-7&keywords=tamiya+cutter
Better than tamiya entry level but lesser than the tamiya sharp pointed. God hands are awesome(have my own) but for the cost the tamiya sharp pointed is what everyone should be using. Make sure to switch blades to a new one if you feel it's not cutting the way it's supposed to be.
http://www.amazon.com/Xacto-X3311-Precision-Knife-Blades/dp/B0000DD1N4/ref=sr_1_7?ie=UTF8&qid=1448907872&sr=8-7&keywords=x-acto
I personally prefer OLFA blades(the people who make tamiya's hobby knives) over x-acto but you can't go wrong with the availability of these. You can just find blades at walmart if you need replacements.
http://www.amazon.com/3M-Wetordry-Sandpaper-03006-Assorted/dp/B005JPGTNI/ref=sr_1_11?ie=UTF8&qid=1448907934&sr=8-11&keywords=sandpaper+pack
Cut these in to squares and sand away. Fold them over a few times for rigidity or glue them on to small Popsicle sticks. Like with all sanding you start with the most aggressive first and build up in to the least aggressive(1000grit to 2500 grit).
Oh and this place is nice and full of friendly people:
Link to the wiki first because that's important.
https://www.reddit.com/r/Gunpla/wiki/index
Post by: noisyturtle on Mon, 07 December 2015, 06:23:13
Post by: noisyturtle on Wed, 09 December 2015, 19:52:35
http://www.gundamkitscollection.com/2014/04/pg-160-00-raiser-return-world-diorama.html (http://www.gundamkitscollection.com/2014/04/pg-160-00-raiser-return-world-diorama.html)
I'm in love, this is so rad :eek:
Post by: romevi on Wed, 09 December 2015, 19:53:57
Check out this Gunpla display: "Return To The World"
http://www.gundamkitscollection.com/2014/04/pg-160-00-raiser-return-world-diorama.html (http://www.gundamkitscollection.com/2014/04/pg-160-00-raiser-return-world-diorama.html)
I'm in love, this is so rad :eek:
Holy, s**t. The ways people customize Gunpla...
Post by: notbrain on Mon, 21 December 2015, 17:31:45
http://gundamguy.blogspot.com/2013/10/rg-1144-rx-78-gundam-gp-01-fb-full.html
Post by: SJHL on Mon, 21 December 2015, 23:38:22
Post by: filphil on Tue, 22 December 2015, 10:22:09
Most detailing such as panel lining or weathering can be done with brushes or other tools.
There's different levels of commitment that you can make to have a good looking kit. If you're getting back in to it give at least one straight build a try without paint since kits have really changed from what was made 5+ years ago
Post by: Fire Brand on Tue, 22 December 2015, 10:55:03
As for airbrushing I'm not the best to ask as I have mainly a background in 40k which is mainly hand painted but, I would suggest having a little look on YouTube at a few painting tutorials as they are quite In depth.
Post by: Halverson on Tue, 22 December 2015, 10:57:22
Post by: romevi on Tue, 22 December 2015, 11:45:09
Saw Bearguy at a Barnes and Noble, and petit Bearguy. I want them all!
They sell Bearguys--I mean, Gunpla at all, at B&N?!
Post by: Halverson on Tue, 22 December 2015, 11:46:03
Saw Bearguy at a Barnes and Noble, and petit Bearguy. I want them all!
They sell Bearguys--I mean, Gunpla at all, at B&N?!
Yup! You can even check out what they have online!
Post by: SJHL on Tue, 22 December 2015, 12:36:32
Post by: filphil on Tue, 22 December 2015, 13:56:57
Appreciate the advice. I'll check out how different it is now from few years back and start from there. :thumb:
Saw Bearguy at a Barnes and Noble, and petit Bearguy. I want them all!
They sell Bearguys--I mean, Gunpla at all, at B&N?!
Yup! You can even check out what they have online!
Bearguy and the MG ball are the epitome of blank slates for custom builds.
(http://1.bp.blogspot.com/-r4sVuEjo-Uk/VMZlIL-E5jI/AAAAAAAIQ14/3LFRhfyG60o/s1600/DSC02580.png)
Post by: romevi on Tue, 22 December 2015, 13:58:13
Appreciate the advice. I'll check out how different it is now from few years back and start from there. :thumb:Saw Bearguy at a Barnes and Noble, and petit Bearguy. I want them all!
They sell Bearguys--I mean, Gunpla at all, at B&N?!
Yup! You can even check out what they have online!
Bearguy and the MG ball are the epitome of blank slates for custom builds.Show Image(http://1.bp.blogspot.com/-r4sVuEjo-Uk/VMZlIL-E5jI/AAAAAAAIQ14/3LFRhfyG60o/s1600/DSC02580.png)
:eek:
Post by: Halverson on Tue, 22 December 2015, 13:58:50
Appreciate the advice. I'll check out how different it is now from few years back and start from there. :thumb:Saw Bearguy at a Barnes and Noble, and petit Bearguy. I want them all!
They sell Bearguys--I mean, Gunpla at all, at B&N?!
Yup! You can even check out what they have online!
Bearguy and the MG ball are the epitome of blank slates for custom builds.Show Image(http://1.bp.blogspot.com/-r4sVuEjo-Uk/VMZlIL-E5jI/AAAAAAAIQ14/3LFRhfyG60o/s1600/DSC02580.png)
That is so badass!
Post by: noisyturtle on Fri, 01 January 2016, 17:26:10
(https://i.imgur.com/hRNhJaQ.jpg)
(https://i.imgur.com/0Qe7tcT.jpg)
(https://i.imgur.com/rcWsiCG.jpg)
Post by: Sinanju on Sat, 02 January 2016, 09:02:15
Having a little fun with my first Real Grade:Love the idea and detail of the RG line. Just have the majority of my kits being MG, and would drive me nuts having two different scales.Show Image(https://i.imgur.com/hRNhJaQ.jpg)Show Image(https://i.imgur.com/0Qe7tcT.jpg)Show Image(https://i.imgur.com/rcWsiCG.jpg)
Currently working on a MG RX-78-2 Ver3.0
Also have made the following:
Seed: MG Strike RM, MG Aegis, MG Duel, MG Buster, MG Blitz. Looking forward to the MG Freedom 2.0 that was announced.
UC: MG Unicorn HD, MG Jesta
Other: MG Exia
Also have a PG Gundam Astry Red Frame from winning one of those Gundam.Info giveaways that they give when you buy a kit during a certain period.
Like the name implies, I did have a MG Sinanju, but it got ruined right before I left for basic. Spent forever sanding, priming, spraying silver and then clear red on it to make it look the best I could and bam; ruined. I did buy another one, but I keep getting speed bump after speed bump with either my airbrush or the compressor and don't want to risk screwing up the kit at this point.
Post by: Fire Brand on Sat, 02 January 2016, 09:53:57
Also have a PG Gundam Astry Red Frame from winning one of those Gundam.Info giveaways that they give when you buy a kit during a certain period.Ahem
**** off you won one of those, fuuuuuuuuuuuuuck me
Yeah thats pretty awesome
Yup
Yup
Pictures once its completed please
Also your MG are like 1/144 for the PG .-.
Post by: hwood34 on Sat, 02 January 2016, 15:12:06
Also have a PG Gundam Astry Red Frame from winning one of those Gundam.Info giveaways that they give when you buy a kit during a certain period.
Oh well that's just not fair...
Post by: Sinanju on Sun, 03 January 2016, 11:12:33
Also have a PG Gundam Astry Red Frame from winning one of those Gundam.Info giveaways that they give when you buy a kit during a certain period.Ahem
**** off you won one of those, fuuuuuuuuuuuuuck me
Yeah thats pretty awesome
Yup
Yup
Pictures once its completed please
Also your MG are like 1/144 for the PG .-.
Won it almost two years ago, and has been made. I'll try to get some pics up later when I can actually try to use something better than my phone.
This is the actual campaign: http://www.bandai-asia.com/gundaminfo-en_4th/result.php
I figured everyone would go for the bundles, so I went for 1 bundle and the single Red Frame. Turned out pretty well, you can even see some of the RG prizes didn't even have enough entries (12 winners listed out of 16 prizes for example)
Definitely made my day when I read the results.
For the RX-78-2, I am just about to start on the shoulder armor. Torso, and arms snapped together so far. Really impressed by the color separation with all the different shades of white and grey. Only gripe I have so far is the manipulator armor being black. Think it would look a lot nicer matching the rest of the arm armor.
Post by: OfTheWild on Sun, 03 January 2016, 19:44:13
Post by: KatzenKinder on Mon, 04 January 2016, 17:07:48
Picked up RG Zaku II yey
Post by: alienman82 on Mon, 04 January 2016, 22:02:51
Post by: Sinanju on Sat, 09 January 2016, 18:50:45
neighbor just gave me 10 or so airplane models. Gotta get those together at some point. Junkers plane is my fav
Pretty cool neighbor. Usually just stick with gundams, but want to get a nice detailed UH-60 at some point.
As promised, pictures of the PG. Phone camera unfortunately.
Dusty unfortunately, I want to get one of those detolf glass displays from Ikea but its like $350 shipped vs $67 picked up.
(http://i.imgur.com/IzhO43q.jpg)
Finishing up the MG RX-78-2. Debating on how to finish it. I kinda want to just put on decals + panel line and then possibly do a flat coat or do I need to do a gloss coat first for the decals? Have heard both techniques.
Post by: filphil on Sun, 07 February 2016, 12:13:07
(http://i.imgur.com/EpRfzMP.jpg)
(http://i.imgur.com/9nTeUVb.jpg)
(http://i.imgur.com/N8nEChE.jpg)
Post by: xJudas on Sun, 07 February 2016, 12:53:44
Post by: filphil on Sun, 07 February 2016, 15:09:28
I wish I had the patience or artistic skill for this. These models you guys are posting are amazing.
Oh **** you're in NJ. I know a few places to pick up gunpla if you wanna talk.
There's actually very little artistic ability necessary. If you've ever heard of the 80/20 rule you'll get 80% of a great looking kit for about 20% of the knowledge to get some of the higher caliber stuff you see on blogs and such. Of course those numbers are made up but it can illustrate the point.
Patience, however, is the real trait you need. Something I really lack to be honest.
Post by: xJudas on Sun, 07 February 2016, 22:03:03
I wish I had the patience or artistic skill for this. These models you guys are posting are amazing.
Oh **** you're in NJ. I know a few places to pick up gunpla if you wanna talk.
There's actually very little artistic ability necessary. If you've ever heard of the 80/20 rule you'll get 80% of a great looking kit for about 20% of the knowledge to get some of the higher caliber stuff you see on blogs and such. Of course those numbers are made up but it can illustrate the point.
Patience, however, is the real trait you need. Something I really lack to be honest.
The extent to my creativity seem to end at just putting them together, any suggestions, or guides about this 80/20 would be appreciated. :D
(http://i.imgur.com/c0gv3IQ.jpg)
Post by: filphil on Sun, 07 February 2016, 22:41:55
I wish I had the patience or artistic skill for this. These models you guys are posting are amazing.
Oh **** you're in NJ. I know a few places to pick up gunpla if you wanna talk.
There's actually very little artistic ability necessary. If you've ever heard of the 80/20 rule you'll get 80% of a great looking kit for about 20% of the knowledge to get some of the higher caliber stuff you see on blogs and such. Of course those numbers are made up but it can illustrate the point.
Patience, however, is the real trait you need. Something I really lack to be honest.
The extent to my creativity seem to end at just putting them together, any suggestions, or guides about this 80/20 would be appreciated. :DShow Image(http://i.imgur.com/c0gv3IQ.jpg)
It's not exclusive to gunpla but...
http://betterexplained.com/articles/understanding-the-pareto-principle-the-8020-rule/ (http://betterexplained.com/articles/understanding-the-pareto-principle-the-8020-rule/)
For a actual info on building better looking gunpla look no further. Painting is more involved of course but everything you read from the guide I post will help build a solid foundation for painting.
http://goodguydangunpla.blogspot.com/2013/08/building-for-beginners-tips-and-tricks.html (http://goodguydangunpla.blogspot.com/2013/08/building-for-beginners-tips-and-tricks.html)
Post by: romevi on Sun, 07 February 2016, 23:29:49
Some people can be extremely talented with customizing their kits.
Post by: mr.squishy on Mon, 08 February 2016, 00:19:25
Post by: HouseofSuffering on Mon, 08 February 2016, 00:32:53
Resin Garage kits straight from Japan.
(http://i.imgur.com/XFZ2UZZ.jpg)
(http://i.imgur.com/AHLSpQo.jpg)
(http://i.imgur.com/mlQD97Y.jpg)
Guy does amazing work and post lots of videos
Matt Mzorek
https://www.youtube.com/user/mvm3897/videos
Post by: OfTheWild on Tue, 09 February 2016, 12:36:02
Not Gundam. But I hunted down and commissioned the best Gunpla guy I could find. I wanted someone that could do the subtle shading in the red and blue to give the colors depth, even though they were just solid colors.
Resin Garage kits straight from Japan.
Guy does amazing work and post lots of videos
Matt Mzorek
Awesome! I'm a big FLCL fan too. Now i need to find a kit!
Post by: filphil on Tue, 09 February 2016, 16:11:15
Post by: HouseofSuffering on Tue, 09 February 2016, 17:35:53
It's hard to tell but the shading on that red cape looks great.
Yeah, sorry, these are the only pics I have on me and they are from my previous phone that took **** pictures. Pics are from 2012.
He is a Professional Photographer by trade so he usually does a photo shoot after he finishes a project.
Post by: HouseofSuffering on Tue, 09 February 2016, 18:04:12
Not Gundam. But I hunted down and commissioned the best Gunpla guy I could find. I wanted someone that could do the subtle shading in the red and blue to give the colors depth, even though they were just solid colors.
Resin Garage kits straight from Japan.
Guy does amazing work and post lots of videos
Matt Mzorek
Awesome! I'm a big FLCL fan too. Now i need to find a kit!
Closest thing you would be able to find is the Rio Bone Canti made by Sentinel, those are a pre painted figures and a little smaller/less detailed. Those ones are pretty expensive now, though.
Finding the original kits that mine were made from was hard as hell back then (2010). I bought them straight from Japan from this guy.
http://tokyohunter.blogspot.com/2010/05/funny-bunny-flcl-canti-color-resin-kit.html
It would be almost impossible to find them now and extremely expensive.....maybe someone knowledgeable in Japan could source them.....but be prepared to pay up the ass for some pieces of resin. LOL
It's kinda sad how little toys/figures were made for such a popular anime....
Post by: alienman82 on Tue, 09 February 2016, 19:46:06
Post by: xJudas on Tue, 09 February 2016, 21:01:55
I wish I had the patience or artistic skill for this. These models you guys are posting are amazing.
Oh **** you're in NJ. I know a few places to pick up gunpla if you wanna talk.
There's actually very little artistic ability necessary. If you've ever heard of the 80/20 rule you'll get 80% of a great looking kit for about 20% of the knowledge to get some of the higher caliber stuff you see on blogs and such. Of course those numbers are made up but it can illustrate the point.
Patience, however, is the real trait you need. Something I really lack to be honest.
The extent to my creativity seem to end at just putting them together, any suggestions, or guides about this 80/20 would be appreciated. :DShow Image(http://i.imgur.com/c0gv3IQ.jpg)
what cap is that? my friend has one too :)
It's a squirrel, came with my Vortex set :P
Post by: filphil on Thu, 18 February 2016, 02:58:52
On the way back to me
(https://3.bp.blogspot.com/-09CunsVlg_s/VsUrppo1j1I/AAAAAAAAVlI/lBV69QCXOxU/s1600/DSC_0022.JPG)
Post by: noisyturtle on Thu, 18 February 2016, 20:00:56
Post by: filphil on Thu, 18 February 2016, 20:03:31
Show Image(https://1.bp.blogspot.com/-TpW1oEievh4/VsU9MayDJ3I/AAAAAAAGMT0/F5plHxydixM/s1600/sticker+strugle.gif)
The struggle is real.
Post by: asdfjkl36 on Thu, 18 February 2016, 20:06:11
Buddy of mine helped with clearing out the backlog.
On the way back to meShow Image(https://3.bp.blogspot.com/-09CunsVlg_s/VsUrppo1j1I/AAAAAAAAVlI/lBV69QCXOxU/s1600/DSC_0022.JPG)
Duuuuude!
I want some Zoids stuff!!!
Post by: filphil on Thu, 18 February 2016, 20:10:41
Buddy of mine helped with clearing out the backlog.
On the way back to meShow Image(https://3.bp.blogspot.com/-09CunsVlg_s/VsUrppo1j1I/AAAAAAAAVlI/lBV69QCXOxU/s1600/DSC_0022.JPG)
Duuuuude!
I want some Zoids stuff!!!
The Zoids kits are a nice break from gundam. It's pretty refreshing
Post by: Sinanju on Fri, 10 June 2016, 15:30:11
(http://www.taghobby.com/wp-content/uploads/2016/06/its71.jpg)
I'm trying to figure out reasons why I don't need it, but I'm having trouble coming up with them. Maybe pending price or really big in size.
Post by: romevi on Fri, 10 June 2016, 15:40:37
1:2 BB-8Show Image(http://www.taghobby.com/wp-content/uploads/2016/06/its71.jpg)
I'm trying to figure out reasons why I don't need it, but I'm having trouble coming up with them. Maybe pending price or really big in size.
Other than it being nearly impossible to import?
Post by: Fire Brand on Fri, 10 June 2016, 16:17:39
(https://c7.staticflickr.com/8/7424/27552213446_dfe196f0ff_k.jpg) (https://flic.kr/p/HYGi9S)Astroid time (https://flic.kr/p/HYGi9S) by Pixelated Poro (https://www.flickr.com/photos/pixelatedporo/), on Flickr
Post by: romevi on Fri, 10 June 2016, 16:25:03
I always forget something, well now you reminded me, put this fellow together need to paint him up yet, I'm thinking spray him all silver then clear red coat him for a nice metallic finish, anywho SD's are growing on me..
(https://c7.staticflickr.com/8/7424/27552213446_dfe196f0ff_k.jpg) (https://flic.kr/p/HYGi9S)Astroid time (https://flic.kr/p/HYGi9S) by Pixelated Poro (https://www.flickr.com/photos/pixelatedporo/), on Flickr
I still gotta finish my RX-78-2.
Post by: noisyturtle on Fri, 10 June 2016, 17:26:32
Post by: Sinanju on Sun, 12 June 2016, 20:32:45
1:2 BB-8Show Image(http://www.taghobby.com/wp-content/uploads/2016/06/its71.jpg)
I'm trying to figure out reasons why I don't need it, but I'm having trouble coming up with them. Maybe pending price or really big in size.
Other than it being nearly impossible to import?
I wasn't aware of an importation problem, but that would be a decent reason unfortunately.
Hoping to maybe get another compressor and to finish my Sinanju. Compressors keep dying on me, and it is incredibly frustrating.
Post by: noisyturtle on Sun, 26 June 2016, 15:58:29
Heavily considering picking up this MG Full Armor Thunderbolt Ver. Ka
(https://4.bp.blogspot.com/-Vd0gajbhHnQ/VxhY8NVmmGI/AAAAAAAKqCc/PVCAqqqPA1wyMziCRAf83PsXyanipNDmwCLcB/s1600/Untitled-121.jpg)
Post by: romevi on Sun, 26 June 2016, 18:20:55
Bandai has been rereleasing a TON of newly manufactured old school kits and some sweet new ones.
Heavily considering picking up this MG Full Armor Thunderbolt Ver. KaShow Image(https://4.bp.blogspot.com/-Vd0gajbhHnQ/VxhY8NVmmGI/AAAAAAAKqCc/PVCAqqqPA1wyMziCRAf83PsXyanipNDmwCLcB/s1600/Untitled-121.jpg)
I have that one pre-ordered. So much for such a good price.
Post by: noisyturtle on Sun, 26 June 2016, 19:47:59
Bandai has been rereleasing a TON of newly manufactured old school kits and some sweet new ones.
Heavily considering picking up this MG Full Armor Thunderbolt Ver. KaShow Image(https://4.bp.blogspot.com/-Vd0gajbhHnQ/VxhY8NVmmGI/AAAAAAAKqCc/PVCAqqqPA1wyMziCRAf83PsXyanipNDmwCLcB/s1600/Untitled-121.jpg)
I have that one pre-ordered. So much for such a good price.
Love the Thunderbots for sure. I'm really looking forward to a future announcement for an MG High mobility Thunderbolt Zaku as well, their HG model looks fantastic but HG aint for me.
edit - I stand corrected, it has already been announced! :thumb:
https://gundamguy.blogspot.com/2016/04/mg-1100-high-mobility-type-zaku-psycho.html (https://gundamguy.blogspot.com/2016/04/mg-1100-high-mobility-type-zaku-psycho.html)
Post by: romevi on Sun, 26 June 2016, 20:00:49
Bandai has been rereleasing a TON of newly manufactured old school kits and some sweet new ones.
Heavily considering picking up this MG Full Armor Thunderbolt Ver. KaShow Image(https://4.bp.blogspot.com/-Vd0gajbhHnQ/VxhY8NVmmGI/AAAAAAAKqCc/PVCAqqqPA1wyMziCRAf83PsXyanipNDmwCLcB/s1600/Untitled-121.jpg)
I have that one pre-ordered. So much for such a good price.
Love the Thunderbots for sure. I'm really looking forward to a future announcement for an MG High mobility Thunderbolt Zaku as well, their HG model looks fantastic but HG aint for me.
edit - I stand corrected, it has already been announced! :thumb:
https://gundamguy.blogspot.com/2016/04/mg-1100-high-mobility-type-zaku-psycho.html (https://gundamguy.blogspot.com/2016/04/mg-1100-high-mobility-type-zaku-psycho.html)
Dang, nice!
Same about HG. Prefer MG and above. Also, a crapton of Dragon Ball Figurerise suddenly are coming out.
Post by: Purp on Sun, 26 June 2016, 20:32:34
Post by: SKD on Thu, 30 June 2016, 16:40:16
Post by: mr.squishy on Thu, 30 June 2016, 18:40:56
Post by: Purp on Fri, 01 July 2016, 09:47:21
Sweeeet! Gunpla on here too! I have a bit of a backlog of MGs and RGs as well as some HGs. I also have a few Tamiya kits too and other kits. I'll take photos tomorrow of all the kits I have! I need to get back into it, but the keyboard stuff has overtaken everything else right now.
Can you elaborate on the meaning of these abbreviations?
Post by: romevi on Fri, 01 July 2016, 10:00:13
Sweeeet! Gunpla on here too! I have a bit of a backlog of MGs and RGs as well as some HGs. I also have a few Tamiya kits too and other kits. I'll take photos tomorrow of all the kits I have! I need to get back into it, but the keyboard stuff has overtaken everything else right now.
Can you elaborate on the meaning of these abbreviations?
HG = 1/144 kits, usually for beginners
MG = 1/100 kits, usually for intermediate builders, but also very good for beginners and experienced
PG = 1/60 kits, usually for experienced, the best you're going to get
[attachimg=1]
Post by: Purp on Fri, 01 July 2016, 10:32:07
HG = 1/144 kits, usually for beginners
MG = 1/100 kits, usually for intermediate builders, but also very good for beginners and experienced
PG = 1/60 kits, usually for experienced, the best you're going to get
(Attachment Link)
Nice I'll look for some 1/144 kits, anything you'd recommend?
Post by: romevi on Fri, 01 July 2016, 10:46:42
HG = 1/144 kits, usually for beginners
MG = 1/100 kits, usually for intermediate builders, but also very good for beginners and experienced
PG = 1/60 kits, usually for experienced, the best you're going to get
(Attachment Link)
Nice I'll look for some 1/144 kits, anything you'd recommend?
My first HG (and very first Gunpla, actually) was the HG Quanta: http://blog.livedoor.jp/hacchaka/archives/51574734.html. A solid kit.
I'm a big fan of the Astray models, so any in those HG sizes I recommend as well.
I've never watched a single Gundam episode, so if there are any specific robots you like I'd take a stab to see if they're available in HG size.
Post by: tp4tissue on Fri, 01 July 2016, 12:12:54
Post by: romevi on Fri, 01 July 2016, 12:13:46
IMHO.. Gundams are all female.. because of the leg to body ratio..
Then why are there female Gundam robots?
Checkmante, tp.
Post by: tp4tissue on Fri, 01 July 2016, 12:20:53
IMHO.. Gundams are all female.. because of the leg to body ratio..
Then why are there female Gundam robots?
Checkmante, tp.
I've only seen 2 official -female kits..
i think the other ones are mods?
Post by: romevi on Fri, 01 July 2016, 12:23:14
IMHO.. Gundams are all female.. because of the leg to body ratio..
Then why are there female Gundam robots?
Checkmante, tp.
I've only seen 2 official -female kits..
i think the other ones are mods?
Yeah, you're right. I think there are only two official ones. :(
Post by: Purp on Sat, 02 July 2016, 20:31:36
My first HG (and very first Gunpla, actually) was the HG Quanta: http://blog.livedoor.jp/hacchaka/archives/51574734.html. A solid kit.
I'm a big fan of the Astray models, so any in those HG sizes I recommend as well.
I've never watched a single Gundam episode, so if there are any specific robots you like I'd take a stab to see if they're available in HG size.
Nice one, I'm thinking about starting with a cool looking RG model because apparently they are relatively as simple to build as HG but more detailed. RG is also 1/144, which is a nice size since I'll be displaying it on the corner of my desk.
Post by: Purp on Sat, 02 July 2016, 22:09:25
| (http://i.imgur.com/Kwlgk69.png) 00-Q | (http://i.imgur.com/P1XEbtx.png) MSF-007 |
Post by: noisyturtle on Sat, 02 July 2016, 22:47:37
I shouldn't have found this thread, these models are so cool. I wanna get started and for my first one I'm between these 2 guys, the mastery level to build them is the same from what I've read. The only difference is the size, the 00-Quanta is 1/144 (HG) while the MSF-007 is 1/100 (RE). I have patience to learn and time to spend building them so after preparing this reply I realized that I will most likely end up with both. I'll put the small one on my shelf and display the big one on the corner of my desk, since I have room for it and could use some extra purple decoration.I would start with the MG. There's just something so satisfying about finishing an MG build, and they look infinitely more impressive on the shelf.
00-Q
MSF-007
The build lasts longer, and the end product looks better. Win win :thumb:
Post by: Purp on Sat, 02 July 2016, 23:10:33
I would start with the MG. There's just something so satisfying about finishing an MG build, and they look infinitely more impressive on the shelf.
The build lasts longer, and the end product looks better. Win win :thumb:
I have some experience with models becuase I used to spend quite some time building airplanes in the past. Even though there's a difficulty degree to Gundam at least the paintjob is already done, these two models I linked come ready out of the box. But I'll probably get a black panel lining marker just in case. I don't wanna add anything to 00Q but perhaps the MSF will benefit from some extra detail here and there, let's see how it's gonna look like after assembly and then I'll decide if I'll detail it or not. I like clean builds and don't want to ruin these gorgeous colors and surfaces.
Post by: romevi on Sat, 02 July 2016, 23:33:20
I prefer MG only because they're bigger and have more details, etc. The HG will run you just over a GI Joe figure, but they're very good for beginners. I forgot about RG. Those are good too. MG in a smaller size.
Also, the instructions are not a hindrance. Yes, they're all in Japanese, but the labels and instructions are so well documented with images and numbers that you won't ever need to read except for label numbers and letters.
Post by: Purp on Sun, 03 July 2016, 20:27:50
My first Gunpla, the Quanta, took me about a week. And I was super slow. They're really awesome, and amazingly articulated. Bandai has some genius engineers for their products.
I prefer MG only because they're bigger and have more details, etc. The HG will run you just over a GI Joe figure, but they're very good for beginners. I forgot about RG. Those are good too. MG in a smaller size.
Also, the instructions are not a hindrance. Yes, they're all in Japanese, but the labels and instructions are so well documented with images and numbers that you won't ever need to read except for label numbers and letters.
Nice, thanks for the heads up. I'll look into RG later but for now I'll stick to the MSF-007 which is RE (1/100). From what I've read it's as simple to build as HG but has MG level of detail - it's a combination of two very popular grades. I also noticed that you mentioned earlier that you never watched a single episode and I'm in the same boat as you, not a big fan of animes either. But the robots, damn they look cool man.
Post by: Firebolt1914 on Wed, 27 July 2016, 23:44:17
Anyways, I got HGUC Unicorn, an MG Sinanju, and an MG Strike Rouge Ver.RM which I didn't realize in store that it was a shade of pink. Thought it was off white. Pictures will be posted when I'm back in the states.
Post by: Hellcatz on Fri, 05 August 2016, 09:21:42
Post by: noisyturtle on Fri, 05 August 2016, 18:12:27
Why don't we have an efsf inspired keycapset already?
White/Blue/Red/Yellow? I could see that working for sure. In fact it's surprising there hasn't been a GB since there was a Macross key set.
Post by: Sly_Trash_Panda on Tue, 09 August 2016, 06:52:30
Post by: kekman on Mon, 15 August 2016, 06:34:32
Post by: tp4tissue on Mon, 15 August 2016, 07:59:00
Post by: romevi on Mon, 15 August 2016, 08:21:28
It's hard to get back into it without any new animes to get excited about.
I've not seen a single episode and I love building the kits.
Post by: Sinanju on Thu, 18 August 2016, 21:32:11
It's hard to get back into it without any new animes to get excited about.
Recent animes:
Thunderbolt
Build Fighters Try
Iron Blooded Orphans
Unicorn (rehash of sorts of the OVA)
The Origin
Upcoming:
Iron Blooded Orphans Season 2
Build Fighters Try: Island Wars.
None of those get you exited?
Anyways, anyone happen to have this compressor? https://www.amazon.com/dp/B00WBT7PTW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1X5QBAIAU8629&coliid=I2LKERJCULTL68
Looking into a replacement and like the 5 year warranty aspect, along with the fact that it has a tank. I really want to do my MG Sinanju justice with a metallic/candy red finish.
Post by: Hellcatz on Thu, 18 August 2016, 22:26:35
I have a cheapo compresser with soda cans as a air tank. ( Not soda cans 2l pop bottlesIt's hard to get back into it without any new animes to get excited about.
Recent animes:
Thunderbolt
Build Fighters Try
Iron Blooded Orphans
Unicorn (rehash of sorts of the OVA)
The Origin
Upcoming:
Iron Blooded Orphans Season 2
Build Fighters Try: Island Wars.
None of those get you exited?
Anyways, anyone happen to have this compressor? https://www.amazon.com/dp/B00WBT7PTW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1X5QBAIAU8629&coliid=I2LKERJCULTL68
Looking into a replacement and like the 5 year warranty aspect, along with the fact that it has a tank. I really want to do my MG Sinanju justice with a metallic/candy red finish.
Post by: noisyturtle on Fri, 19 August 2016, 20:21:19
(https://66.media.tumblr.com/e177e5e047396dcfad67e85ee861539d/tumblr_o0zdzptocV1r3h642o3_1280.jpg)
Post by: Hellcatz on Sat, 20 August 2016, 09:21:25
still waiting on my MG Tequila Gundam kitNot a big fan of the og kits. I guess it because I grew up with seed era Gundam.Show Image(https://66.media.tumblr.com/e177e5e047396dcfad67e85ee861539d/tumblr_o0zdzptocV1r3h642o3_1280.jpg)
Post by: tp4tissue on Sat, 20 August 2016, 12:13:31
It's hard to get back into it without any new animes to get excited about.
Recent animes:
Thunderbolt
Build Fighters Try
Iron Blooded Orphans
Unicorn (rehash of sorts of the OVA)
The Origin
Upcoming:
Iron Blooded Orphans Season 2
Build Fighters Try: Island Wars.
None of those get you exited?
Anyways, anyone happen to have this compressor? https://www.amazon.com/dp/B00WBT7PTW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1X5QBAIAU8629&coliid=I2LKERJCULTL68
Looking into a replacement and like the 5 year warranty aspect, along with the fact that it has a tank. I really want to do my MG Sinanju justice with a metallic/candy red finish.
None of those have got my heart going, like Gundam 00...
Not saying they're bad..
the Gundam Try , I think was targeted towards a much younger crowd.. Kinda off beat for the older gundam fan..
Unicorn just feels too low tech, and Origin is well, if you saw the original, then it's a bit weak.. i mean, ,at least give us n jammers..
Post by: tp4tissue on Sat, 20 August 2016, 13:34:19
The cooler looking Gundam always wins...
They don't really need to tech up, they just need Cool panels..
Post by: Hellcatz on Sat, 20 August 2016, 13:34:32
Some of the best looking Gundam are from unicorn. Prob feel plain for you because it's based of universal century gundamIt's hard to get back into it without any new animes to get excited about.
Recent animes:
Thunderbolt
Build Fighters Try
Iron Blooded Orphans
Unicorn (rehash of sorts of the OVA)
The Origin
Upcoming:
Iron Blooded Orphans Season 2
Build Fighters Try: Island Wars.
None of those get you exited?
Anyways, anyone happen to have this compressor? https://www.amazon.com/dp/B00WBT7PTW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1X5QBAIAU8629&coliid=I2LKERJCULTL68
Looking into a replacement and like the 5 year warranty aspect, along with the fact that it has a tank. I really want to do my MG Sinanju justice with a metallic/candy red finish.
None of those have got my heart going, like Gundam 00...
Not saying they're bad..
the Gundam Try , I think was targeted towards a much younger crowd.. Kinda off beat for the older gundam fan..
Unicorn just feels too low tech, and Origin is well, if you saw the original, then it's a bit weak.. i mean, ,at least give us n jammers..
Post by: Hellcatz on Sat, 20 August 2016, 13:36:29
If you think about it,You say that but 00 exia kinda go it's ass kicked... TWICE
The cooler looking Gundam always wins...
They don't really need to tech up, they just need Cool panels..
Post by: tp4tissue on Sat, 20 August 2016, 13:40:54
If you think about it,You say that but 00 exia kinda go it's ass kicked... TWICE
The cooler looking Gundam always wins...
They don't really need to tech up, they just need Cool panels..
That's why its cool was upgraded each time..
That's how they build gundam drama.
Post by: Sinanju on Sat, 20 August 2016, 15:49:25
It's hard to get back into it without any new animes to get excited about.
Recent animes:
Thunderbolt
Build Fighters Try
Iron Blooded Orphans
Unicorn (rehash of sorts of the OVA)
The Origin
Upcoming:
Iron Blooded Orphans Season 2
Build Fighters Try: Island Wars.
None of those get you exited?
Anyways, anyone happen to have this compressor? https://www.amazon.com/dp/B00WBT7PTW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1X5QBAIAU8629&coliid=I2LKERJCULTL68
Looking into a replacement and like the 5 year warranty aspect, along with the fact that it has a tank. I really want to do my MG Sinanju justice with a metallic/candy red finish.
None of those have got my heart going, like Gundam 00...
Not saying they're bad..
the Gundam Try , I think was targeted towards a much younger crowd.. Kinda off beat for the older gundam fan..
Unicorn just feels too low tech, and Origin is well, if you saw the original, then it's a bit weak.. i mean, ,at least give us n jammers..
Gundam
Honestly, give Build Fighters a shot. I thought the same thing, but gave it a fair chance and thought it was pretty good. Sure, its lighter and not a war-gritty show like 08 MS Team, but it still has some good looking MS designs and fights.
Add a MG Jegan (specifically Stark Jegan) to the list in addition to the Tequila. Problem is it seems that Bandai has been going downhill on the MG line, or at least in my opinion. A lot of the 2015 MGs were some form of a variant that Bandai could use preexisting molds. Hopefully we see some cool stuff in the upcoming months. Maybe even see some MG 00 models with the 10 year anniversary coming up. Although considering that we have not even had a MG G-Self, MG Barbatos, or MG Build Burning Gundam I dont really have my hopes up.
Post by: tp4tissue on Sun, 21 August 2016, 06:03:37
Post by: Sinanju on Thu, 25 August 2016, 18:41:33
Bawoo 1/100:
(https://1.bp.blogspot.com/-LXN-d9brGns/V78Jjy1RWoI/AAAAAAALAqE/-eualoyL-Ng87b8HLkEmXlTCV1zfwqr6gCLcB/s1600/2016082520352501f%2B%25281%2529.jpg)
I would prefer a MG, but this is still pretty nice. Maybe even seeing a P Bandai 1/100 ReBawoo later?
ReBawoo:
(http://vignette1.wikia.nocookie.net/gundam/images/a/a6/AMX-107R_Rebawoo_front.png/revision/latest?cb=20130831111627)
Recently moved to a new apartment, so not much to add in terms of new purchases. I did manage to buy a Gundam Planet Nipper on Amazon though. Hopefully get to test it on a MG Freedom V2 this weekend.
Post by: tp4tissue on Thu, 25 August 2016, 19:12:12
RE 1/100 Bawoo announced:
Bawoo 1/100:Show Image(https://1.bp.blogspot.com/-LXN-d9brGns/V78Jjy1RWoI/AAAAAAALAqE/-eualoyL-Ng87b8HLkEmXlTCV1zfwqr6gCLcB/s1600/2016082520352501f%2B%25281%2529.jpg)
I would prefer a MG, but this is still pretty nice. Maybe even seeing a P Bandai 1/100 ReBawoo later?
ReBawoo:Show Image(http://vignette1.wikia.nocookie.net/gundam/images/a/a6/AMX-107R_Rebawoo_front.png/revision/latest?cb=20130831111627)
Recently moved to a new apartment, so not much to add in terms of new purchases. I did manage to buy a Gundam Planet Nipper on Amazon though. Hopefully get to test it on a MG Freedom V2 this weekend.
What's the US price..
Post by: Sinanju on Thu, 25 August 2016, 19:57:03
What's the US price..
Very early in the announcement, so I don't think the price has been released.
I'd guesstimate around$40 USD based on previous RE models (price taken from amazon):
RE/100 Gundam MK III: $39.99
RE/100: Djijeh: $36.95
RE/100: GP04: $38.69
RE/100: Efreet Kai: $33.02
Post by: tp4tissue on Fri, 26 August 2016, 04:11:30
Post by: Fire Brand on Fri, 26 August 2016, 05:44:44
Also wasn't the next re supposedly the kshatriya whatever happened to that
Post by: Sinanju on Fri, 26 August 2016, 18:23:26
That's without shipping though isn't it
Also wasn't the next re supposedly the kshatriya whatever happened to that
Price is including Prime-2 Day shipping; so free if you're a prime member. (Technically paying for it w/ your subscription.)
I remember hearing something about a Kshatriya rumor, but have not heard anything since. If it does come out, I look forward to see some of the custom builders/ pros have a take at it.
Gundam.Wikia is showing Bawoo at ¥3,500 ~ $35 USD.
Post by: Fire Brand on Fri, 26 August 2016, 18:33:07
Ahh right, pretty sure they said the kshatriya might be out 3rd quarter of this year, hopeing they making that Jegan RE they showed a while back on the planning stage thoughThat's without shipping though isn't it
Also wasn't the next re supposedly the kshatriya whatever happened to that
Price is including Prime-2 Day shipping; so free if you're a prime member. (Technically paying for it w/ your subscription.)
I remember hearing something about a Kshatriya rumor, but have not heard anything since. If it does come out, I look forward to see some of the custom builders/ pros have a take at it.
Gundam.Wikia is showing Bawoo at ¥3,500 ~ $35 USD.
Post by: Dr_Alphabet on Fri, 26 August 2016, 18:59:23
Post by: Fire Brand on Fri, 26 August 2016, 19:09:34
Does anyone know where I can find replacement parts for a MG kit? I tried gundamstoreandmore.com but never got a response. I know I could mold and cast it but I really don't want to invest in all that if I can help it. It's a really small part that is probably used in multiple kits but I don't know which and the sellers I've contacted either don't have it, don't respond, or don't carry parts for MG. I'm dying here as I'm mostly done painting but can't really do anything until I get this partWhat part and kit is it from do you have a image of the instruction and I can look through my parts box for you
Post by: Dr_Alphabet on Fri, 26 August 2016, 20:03:37
It's from a 1/144 scale MG MS-06S Zaku II. Sprue #F-28. It's a tiny part that connects the shoulder and arm. I'll see if I can upload a picture from the manual in a little bit.Does anyone know where I can find replacement parts for a MG kit? I tried gundamstoreandmore.com but never got a response. I know I could mold and cast it but I really don't want to invest in all that if I can help it. It's a really small part that is probably used in multiple kits but I don't know which and the sellers I've contacted either don't have it, don't respond, or don't carry parts for MG. I'm dying here as I'm mostly done painting but can't really do anything until I get this partWhat part and kit is it from do you have a image of the instruction and I can look through my parts box for you
Post by: Sinanju on Fri, 26 August 2016, 20:48:21
It's from a 1/144 scale MG MS-06S Zaku II. Sprue #F-28. It's a tiny part that connects the shoulder and arm. I'll see if I can upload a picture from the manual in a little bit.
You sure its a MG? MGs come in at 1/100 scale. If it is 1/144 then it might be a HGUC or a RG.
(Assuming you're US) Not sure if they're still doing it, but BlueFinCorp is the main US distributor & has a page about replacement parts: http://www.bluefincorp.com/catalog/replace
Post by: Dr_Alphabet on Fri, 26 August 2016, 21:03:28
It is 1/100 and I didn't order it through a bluefin distributor so Idk if they'd ship the piece without some kind of proof of purchaseIt's from a 1/144 scale MG MS-06S Zaku II. Sprue #F-28. It's a tiny part that connects the shoulder and arm. I'll see if I can upload a picture from the manual in a little bit.
You sure its a MG? MGs come in at 1/100 scale. If it is 1/144 then it might be a HGUC or a RG.
(Assuming you're US) Not sure if they're still doing it, but BlueFinCorp is the main US distributor & has a page about replacement parts: http://www.bluefincorp.com/catalog/replace
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Post by: Dr_Alphabet on Fri, 26 August 2016, 21:05:33
Also, based on that link, it says replacement parts are suspended atmIt's from a 1/144 scale MG MS-06S Zaku II. Sprue #F-28. It's a tiny part that connects the shoulder and arm. I'll see if I can upload a picture from the manual in a little bit.
You sure its a MG? MGs come in at 1/100 scale. If it is 1/144 then it might be a HGUC or a RG.
(Assuming you're US) Not sure if they're still doing it, but BlueFinCorp is the main US distributor & has a page about replacement parts: http://www.bluefincorp.com/catalog/replace
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Post by: Dr_Alphabet on Sat, 27 August 2016, 14:30:01
Does anyone know where I can find replacement parts for a MG kit? I tried gundamstoreandmore.com but never got a response. I know I could mold and cast it but I really don't want to invest in all that if I can help it. It's a really small part that is probably used in multiple kits but I don't know which and the sellers I've contacted either don't have it, don't respond, or don't carry parts for MG. I'm dying here as I'm mostly done painting but can't really do anything until I get this partWhat part and kit is it from do you have a image of the instruction and I can look through my parts box for you
It's this little guy here. (http://i.imgur.com/S6123U1.jpg) It's part of the body unit where the should attaches. And I said 1/144 scale but it's 1/100.
Post by: tp4tissue on Sat, 27 August 2016, 15:18:24
How do you guys get good gold without it being factory plated.
Post by: Sinanju on Sun, 28 August 2016, 07:16:03
what do you guys do for Gold plating.. like the akatsuki model..
How do you guys get good gold without it being factory plated.
I've never really had to do any gold plating type kit, but my best guest would be these option:
Buy the plate version & be very careful on nub management. Then use a gold gundam marker to hide any imperfections and cuts.
Airbrush/ spray can gold paint onto it. The biggest problem is just finding a gold that looks right - I've seen some custom painted gold kits look amazing, and others not so much. This video may be helpful on finding the gold you like best:
Post by: Fire Brand on Sun, 28 August 2016, 07:34:03
Ahh its the inner shoulder piece I don't have a spare of those unfortunately, your only real option would be to cast a mold of the other one, that being said it wouldn't cost all that much to get it done, but its going to be the same as buying another kit both ways :/Does anyone know where I can find replacement parts for a MG kit? I tried gundamstoreandmore.com but never got a response. I know I could mold and cast it but I really don't want to invest in all that if I can help it. It's a really small part that is probably used in multiple kits but I don't know which and the sellers I've contacted either don't have it, don't respond, or don't carry parts for MG. I'm dying here as I'm mostly done painting but can't really do anything until I get this partWhat part and kit is it from do you have a image of the instruction and I can look through my parts box for you
It's this little guy here.Show Image(http://i.imgur.com/S6123U1.jpg)It's part of the body unit where the should attaches. And I said 1/144 scale but it's 1/100.
Post by: tp4tissue on Sun, 28 August 2016, 07:40:22
what do you guys do for Gold plating.. like the akatsuki model..
How do you guys get good gold without it being factory plated.
I've never really had to do any gold plating type kit, but my best guest would be these option:
Buy the plate version & be very careful on nub management. Then use a gold gundam marker to hide any imperfections and cuts.
Airbrush/ spray can gold paint onto it. The biggest problem is just finding a gold that looks right - I've seen some custom painted gold kits look amazing, and others not so much. This video may be helpful on finding the gold you like best:
Hrrrm,, but that Mirror like effect.. I guess perhaps get the unplated model, then get it plastic chromed at the specialty shops
Post by: Dr_Alphabet on Sun, 28 August 2016, 16:18:38
Yea I figuredAhh its the inner shoulder piece I don't have a spare of those unfortunately, your only real option would be to cast a mold of the other one, that being said it wouldn't cost all that much to get it done, but its going to be the same as buying another kit both ways :/Does anyone know where I can find replacement parts for a MG kit? I tried gundamstoreandmore.com but never got a response. I know I could mold and cast it but I really don't want to invest in all that if I can help it. It's a really small part that is probably used in multiple kits but I don't know which and the sellers I've contacted either don't have it, don't respond, or don't carry parts for MG. I'm dying here as I'm mostly done painting but can't really do anything until I get this partWhat part and kit is it from do you have a image of the instruction and I can look through my parts box for you
It's this little guy here.Show Image(http://i.imgur.com/S6123U1.jpg)It's part of the body unit where the should attaches. And I said 1/144 scale but it's 1/100.
but at least if I invest in molding/casting materials I can start working on some custom keycaps 
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Post by: tp4tissue on Sun, 28 August 2016, 16:23:59
Post by: noisyturtle on Tue, 13 September 2016, 18:38:04
http://www.gundamplanet.com/mg-ms-06r-zaku-ii-high-mobility-type-psycho-zaku-gundam-thunderbolt-ver-ka.html (http://www.gundamplanet.com/mg-ms-06r-zaku-ii-high-mobility-type-psycho-zaku-gundam-thunderbolt-ver-ka.html)
much excite ;D
upcoming Impulse Gundam is very nice too: http://www.gundamplanet.com/mg-zgmf-x56s-impulse-gundam-blanche.html (http://www.gundamplanet.com/mg-zgmf-x56s-impulse-gundam-blanche.html)
Post by: tp4tissue on Tue, 13 September 2016, 19:19:20
Show Image(http://i.imgur.com/7drHiqr.gif)
http://www.gundamplanet.com/mg-ms-06r-zaku-ii-high-mobility-type-psycho-zaku-gundam-thunderbolt-ver-ka.html (http://www.gundamplanet.com/mg-ms-06r-zaku-ii-high-mobility-type-psycho-zaku-gundam-thunderbolt-ver-ka.html)
much excite ;D
upcoming Impulse Gundam is very nice too: http://www.gundamplanet.com/mg-zgmf-x56s-impulse-gundam-blanche.html (http://www.gundamplanet.com/mg-zgmf-x56s-impulse-gundam-blanche.html)
Zaku looks super cool..
I don't even remember Impulse from gundam seed, what episode was it in.
Post by: Sinanju on Wed, 14 September 2016, 20:43:09
Show Image(http://i.imgur.com/7drHiqr.gif)
http://www.gundamplanet.com/mg-ms-06r-zaku-ii-high-mobility-type-psycho-zaku-gundam-thunderbolt-ver-ka.html (http://www.gundamplanet.com/mg-ms-06r-zaku-ii-high-mobility-type-psycho-zaku-gundam-thunderbolt-ver-ka.html)
much excite ;D
upcoming Impulse Gundam is very nice too: http://www.gundamplanet.com/mg-zgmf-x56s-impulse-gundam-blanche.html (http://www.gundamplanet.com/mg-zgmf-x56s-impulse-gundam-blanche.html)
Zaku looks super cool..
I don't even remember Impulse from gundam seed, what episode was it in.
Been awhile since I watched SEED Destiny, but it was in the first episode for sure and I believe throughout the show. Although this one is from a side story or something. I do really like the white/grey colorway on gundams though. Just wish it was more detailed like this custom build one I saw.
Really wish Bandai would stop with the P-Bandai BS and start churning out new models.
Post by: Beanhead on Thu, 15 September 2016, 08:31:56
Post by: tp4tissue on Thu, 15 September 2016, 13:04:42
Probably about to buy my first MG, the Hi-Nu Ver Ka.
Looks good
(http://emoticoner.com/files/emoticons/onion-head/pretty-onion-head-emoticon.gif?1292862516)
Post by: Dr_Alphabet on Thu, 15 September 2016, 13:10:46
Show Image(http://i.imgur.com/7drHiqr.gif)
http://www.gundamplanet.com/mg-ms-06r-zaku-ii-high-mobility-type-psycho-zaku-gundam-thunderbolt-ver-ka.html (http://www.gundamplanet.com/mg-ms-06r-zaku-ii-high-mobility-type-psycho-zaku-gundam-thunderbolt-ver-ka.html)
much excite ;D
upcoming Impulse Gundam is very nice too: http://www.gundamplanet.com/mg-zgmf-x56s-impulse-gundam-blanche.html (http://www.gundamplanet.com/mg-zgmf-x56s-impulse-gundam-blanche.html)
I can see some killer mods happening to that Zaku kit. It's practically begging for it
Post by: OfTheWild on Fri, 07 October 2016, 21:23:29
(http://d2ev13g7cze5ka.cloudfront.net/max/max01035_0_1474432526.jpg?v=1474432526) (http://hlj.com/product/max01035?utm_source=Reddit&utm_medium=Reddit%20Paid%20Advertising&utm_term=&utm_content=1/350%20PLAMAX%20JG-02:%20Gipsy%20Danger%20(Pacific%20Rim)%20by%20Max%20Factory&utm_campaign=1/350%20PLAMAX%20JG-02:%20Gipsy%20Danger%20(Pacific%20Rim)%20by%20Max%20Factory)
Post by: Sinanju on Sat, 08 October 2016, 21:26:02
Not Gundam, but it looks like MaxFactory is about to drop the Gipsy Danger from Pacific Rim this December... the kit looks pretty awesome:
(http://d2ev13g7cze5ka.cloudfront.net/max/max01035_0_1474432526.jpg?v=1474432526) (http://hlj.com/product/max01035?utm_source=Reddit&utm_medium=Reddit%20Paid%20Advertising&utm_term=&utm_content=1/350%20PLAMAX%20JG-02:%20Gipsy%20Danger%20(Pacific%20Rim)%20by%20Max%20Factory&utm_campaign=1/350%20PLAMAX%20JG-02:%20Gipsy%20Danger%20(Pacific%20Rim)%20by%20Max%20Factory)
Saw some early pics of it awhile ago and am looking forward to it. Id be down for a Gipsy Danger & Stryker Eureka for sure. Saw the movie in imax on release so I was able to get some cool posters, just need to frame them and they should look good with the kits.
Gundam wise; at least we have a new MG coming out. MG Sniper II. Looking at the MG list I cant believe we only got three new models for 2016. I remember getting into gunpla in 2012 with like 12 new MGs for the year. Hope Bandai makes up for a disappointing year of releases.
Post by: tp4tissue on Sat, 08 October 2016, 21:43:39
Post by: Sinanju on Thu, 17 November 2016, 22:12:24
I've been contemplating getting them armored core model kits.. looks way cooler than the newer gundam stuff. imho.
Have you tried any of them before? Quite a few of them do look pretty cool.
RE 1/100 Bawoo announced:
Bawoo 1/100:Show Image(https://1.bp.blogspot.com/-LXN-d9brGns/V78Jjy1RWoI/AAAAAAALAqE/-eualoyL-Ng87b8HLkEmXlTCV1zfwqr6gCLcB/s1600/2016082520352501f%2B%25281%2529.jpg)
I would prefer a MG, but this is still pretty nice. Maybe even seeing a P Bandai 1/100 ReBawoo later?
ReBawoo:Show Image(http://vignette1.wikia.nocookie.net/gundam/images/a/a6/AMX-107R_Rebawoo_front.png/revision/latest?cb=20130831111627)
Recently moved to a new apartment, so not much to add in terms of new purchases. I did manage to buy a Gundam Planet Nipper on Amazon though. Hopefully get to test it on a MG Freedom V2 this weekend.
And P-Bandai 1/100 RE ReBawoo.
(http://bandai-a.akamaihd.net/bc/img/model/xl/1000110307_2.jpg)
Also the first MG for 2017:
(https://4.bp.blogspot.com/-FiKVNxEjHwQ/WBTnZ51hmiI/AAAAAAALK88/l-yks8qxx-IIsPSfZ0Xz8-disj26On2JACLcB/s1600/Untitled-14.png)
Post by: noisyturtle on Sun, 25 December 2016, 02:27:25
Post by: rabbitfire on Sun, 25 December 2016, 04:23:30
Post by: FLOCKA on Tue, 27 December 2016, 17:02:12
Here's 2 of my finished kits:
(http://i.imgur.com/CoCOlhT.jpg)
1/20 Konrad
(http://i.imgur.com/f0v2RDs.jpg)
1/20 Seapig
Post by: tp4tissue on Tue, 27 December 2016, 19:31:26
Anybody here into Maschinen Krieger? I used to be into gunpla, but the realism of Ma.K designs really drew me in. Seeing others' work inspired me to start learning how to hand-paint with Mr. Color lacquers. You can achieve some very interesting effects since Mr. Color Thinner "activates" previous layers and lets you blend colors.
Here's 2 of my finished kits:Show Image(http://i.imgur.com/CoCOlhT.jpg)
1/20 KonradShow Image(http://i.imgur.com/f0v2RDs.jpg)
1/20 Seapig
/Very impressed with your stroke technique !!(http://emoticoner.com/files/emoticons/onion-head/wow1-onion-head-emoticon.gif?1292862527)
Post by: Sinanju on Tue, 27 December 2016, 21:55:22
My gundamNice collection.
Anybody here into Maschinen Krieger? I used to be into gunpla, but the realism of Ma.K designs really drew me in. Seeing others' work inspired me to start learning how to hand-paint with Mr. Color lacquers. You can achieve some very interesting effects since Mr. Color Thinner "activates" previous layers and lets you blend colors.
Here's 2 of my finished kits:Show Image(http://i.imgur.com/CoCOlhT.jpg)
1/20 KonradShow Image(http://i.imgur.com/f0v2RDs.jpg)
1/20 Seapig
I have not, but very impressive paintjobs. I really only do gunpla, but have looked at getting a UH-60M model kit. Although I would prefer a L or A+ just because those are what my unit operates.
Received a RE 1/100 Nightingale from my GH secret Santa, and a 1/100 Gusion Rebake from family. The nightingale is really making me look at compressors and airbrushes again... hurray money sink.
Post by: rabbitfire on Wed, 28 December 2016, 20:48:24
Anybody here into Maschinen Krieger? I used to be into gunpla, but the realism of Ma.K designs really drew me in. Seeing others' work inspired me to start learning how to hand-paint with Mr. Color lacquers. You can achieve some very interesting effects since Mr. Color Thinner "activates" previous layers and lets you blend colors.
Here's 2 of my finished kits:Show Image(http://i.imgur.com/CoCOlhT.jpg)
1/20 KonradShow Image(http://i.imgur.com/f0v2RDs.jpg)
1/20 Seapig
Nice paint job dude! Will try to paint a gundam one day :thumb:
Post by: FLOCKA on Wed, 28 December 2016, 21:46:20
Post by: hanoipho on Mon, 02 January 2017, 07:20:39
Not Gundam, but it looks like MaxFactory is about to drop the Gipsy Danger from Pacific Rim this December... the kit looks pretty awesome:
(http://d2ev13g7cze5ka.cloudfront.net/max/max01035_0_1474432526.jpg?v=1474432526) (http://hlj.com/product/max01035?utm_source=Reddit&utm_medium=Reddit%20Paid%20Advertising&utm_term=&utm_content=1/350%20PLAMAX%20JG-02:%20Gipsy%20Danger%20(Pacific%20Rim)%20by%20Max%20Factory&utm_campaign=1/350%20PLAMAX%20JG-02:%20Gipsy%20Danger%20(Pacific%20Rim)%20by%20Max%20Factory)
I think it is a firgue from sideshowtoy
Post by: potatobot on Mon, 02 January 2017, 08:39:31
Sent from my iPhone using Tapatalk
Post by: Sinanju on Mon, 02 January 2017, 08:57:57
Pretty sure its the model kit: http://www.goodsmile.info/en/product/5957/PLAMAX+JG+02+Gipsy+Danger.htmlNot Gundam, but it looks like MaxFactory is about to drop the Gipsy Danger from Pacific Rim this December... the kit looks pretty awesome:
(http://d2ev13g7cze5ka.cloudfront.net/max/max01035_0_1474432526.jpg?v=1474432526) (http://hlj.com/product/max01035?utm_source=Reddit&utm_medium=Reddit%20Paid%20Advertising&utm_term=&utm_content=1/350%20PLAMAX%20JG-02:%20Gipsy%20Danger%20(Pacific%20Rim)%20by%20Max%20Factory&utm_campaign=1/350%20PLAMAX%20JG-02:%20Gipsy%20Danger%20(Pacific%20Rim)%20by%20Max%20Factory)
I think it is a firgue from sideshowtoy
SideShowToy's version is a fixed statue, I think you're thinking of the NECA.
Thanks for the compliments guys! I haven't done much modeling since keyboards have become my main hobby lately, but I should probably make some time for it so my skills don't get rusty. My next "goal" is to learn diorama making so these guys can have a cool display base, but that is a whole big discipline of its own, lots to learn!I especially love the ones that make use of "smoke". I think it adds a really cool dynamic look, if you can nail it down right.
(https://4.bp.blogspot.com/-LvcuYPt576c/WAXT2nj4nJI/AAAAAAALJJM/PRRrpgJzGpkFhtTSC4T3qjUSYwaSbmVYgCLcB/s1600/CutuPYfUIAAj_X3.jpg)
Was wondering if anyone knows about other brands of zoid models? Bandai ones are kinda boringTry Kotobukiya. I want to say I saw another company for them, but can't think of it right now.
Sent from my iPhone using Tapatalk
RE 1/100 Nightingale. MG 1/100 RX-78-2 next to it.
(http://i.imgur.com/MCKScjx.jpg)
Currently buidling the Gusion Rebake 1/100
Airbrush & compressor should be here Tuesday =D Also have a MG Char's Zaku II and MG RX-178-2 on the way.
Post by: noisyturtle on Sun, 05 March 2017, 20:57:06
(http://i.imgur.com/w3b8wEw.jpg)
Post by: tp4tissue on Sun, 05 March 2017, 21:56:54
some new stuff to get busy on -Show Image(http://i.imgur.com/w3b8wEw.jpg)
/So jelly.
Tp4 no can fordz.
Post by: ghostdeini on Sun, 19 March 2017, 15:38:39
some new stuff to get busy on -Show Image(http://i.imgur.com/w3b8wEw.jpg)
That metal slug model looks like a lot of fun. Are you going to build it up as clean or weathered?
Post by: noisyturtle on Sun, 19 March 2017, 23:09:07
some new stuff to get busy on -Show Image(http://i.imgur.com/w3b8wEw.jpg)
That metal slug model looks like a lot of fun. Are you going to build it up as clean or weathered?
I've actually never painted a model before and don't own the stuff to so it'll be a straight build.
Post by: tp4tissue on Sun, 19 March 2017, 23:23:28
some new stuff to get busy on -Show Image(http://i.imgur.com/w3b8wEw.jpg)
That metal slug model looks like a lot of fun. Are you going to build it up as clean or weathered?
I've actually never painted a model before and don't own the stuff to so it'll be a straight build.
how many metal slugs model kits are there.. is that the only one ?
pretty sure u have to paint it though. it's not a gundam kit.
Post by: ghostdeini on Sun, 19 March 2017, 23:26:26
some new stuff to get busy on -Show Image(http://i.imgur.com/w3b8wEw.jpg)
That metal slug model looks like a lot of fun. Are you going to build it up as clean or weathered?
I've actually never painted a model before and don't own the stuff to so it'll be a straight build.
how many metal slugs model kits are there.. is that the only one ?
Afaik that's the only one so far. Wave is a company in Japan which currently holds the license to make those kits. The tank has been out for a while now and has been relatively popular due to the cult status of the games, so I'd hope they'll make other kits available!
Post by: noisyturtle on Wed, 25 October 2017, 00:29:20
Post by: tp4tissue on Wed, 25 October 2017, 17:05:35
Post by: noisyturtle on Wed, 25 October 2017, 17:12:08
Post by: noisyturtle on Mon, 04 December 2017, 19:16:39
(https://i.imgur.com/ee4YwUY.jpg)
Post by: corygrapher on Fri, 05 January 2018, 23:27:59
Post by: tp4tissue on Sat, 06 January 2018, 07:43:16
How much does a fully assembled PG-00 cost?
assembled ?
Post by: notflipperdan420 on Tue, 27 March 2018, 13:53:48
Post by: tp4tissue on Tue, 27 March 2018, 14:33:05
had so many as a kid, I should sit down and build one sometime :D
I hurd females are totally into guys who spend alot of time building gundam models.
Post by: romevi on Tue, 27 March 2018, 15:08:13
had so many as a kid, I should sit down and build one sometime :D
I hurd females are totally into guys who spend alot of time building gundam models.
You herd wrong.
Post by: tp4tissue on Tue, 27 March 2018, 15:39:33
had so many as a kid, I should sit down and build one sometime :D
I hurd females are totally into guys who spend alot of time building gundam models.
You herd wrong.
(https://i.imgur.com/HmeSYmM.jpg)
Post by: mittyzz on Thu, 07 June 2018, 20:45:47
Post by: Pewpew on Thu, 07 June 2018, 20:53:09
Post by: mousetrap00 on Fri, 08 June 2018, 02:16:48
Post by: noisyturtle on Sun, 12 August 2018, 14:40:06
(https://i.imgur.com/JVr3mu2.jpg)
Post by: tp4tissue on Sun, 12 August 2018, 16:48:45
this is really cool, had to share:Show Image(https://i.imgur.com/JVr3mu2.jpg)
Don' make any sense.. buhhhhh.. Heck,, it's the Future...
Post by: romevi on Mon, 13 August 2018, 11:18:46
this is really cool, had to share:Show Image(https://i.imgur.com/JVr3mu2.jpg)
Don' make any sense.. buhhhhh.. Heck,, it's the Future...
It's a modified kit. I forget what the robot is, but it's supposed to have two arms. The guy ended up removing one of the arms and then modified the body to be the destroyed Death Star.
It's f**king amazing. I'm very impressed. That's a lot of detail for a kit that size. I'm always baffled with some of the modified kits I see on the internet.
Post by: noisyturtle on Mon, 13 August 2018, 13:30:34
Post by: noisyturtle on Sat, 02 May 2020, 00:01:51
(https://i.redd.it/h1tgokulx7w41.jpg)
Post by: Larken on Tue, 05 May 2020, 00:11:19
[attach=1]
Broke a piece when disassembling it. Waiting on some plastic cement to arrive so I can fix it.
Post by: phinix on Tue, 05 May 2020, 04:42:02
(https://www.kingkit.co.uk/uploads/shop/large/3609124thfeb_c%20032.JPG)
Post by: Piwi on Thu, 28 May 2020, 12:55:01