Author Topic: [IC] Latching cherry MX switches (locking)  (Read 25494 times)

0 Members and 1 Guest are viewing this topic.

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
[IC] Latching cherry MX switches (locking)
« on: Sun, 24 August 2014, 02:06:23 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches).  Is there interest in getting a group buy together  for some of these?  I'd say minimum buy in of 5 switches (I don't want to have to send out 100 individual packages).

Edit:
Head over to deskthority and order them through 7bit, he can get them for $1.35 each, and we should have enough to meet the MOQ now.
http://deskthority.net/group-buys-f50/cherry-mx-taking-pre-orders-t2760.html
« Last Edit: Mon, 08 September 2014, 12:19:42 by worldspawn »
I can make acrylic laser cut cases/plates PM for info

Offline samwisekoi

  • MAWG since 1997
  • * Administrator
  • Posts: 2480
  • Location: Mt. View, California
  • Sorry, moving houses. Be back ASAP.
    • Tweet samwisekoi
Re: [IC] Latching cherry MX switches
« Reply #1 on: Sun, 24 August 2014, 07:55:10 »
I'd be in for 5.

These are unobtainable, and are very interesting to use on alternative keyboards.

Good luck!

 - Ron | samwisekoi
I like keyboards and case modding.  Everything about a computer should be silent -- except the KEYBOARD!

'85 IBM F-122/Soarer Keyboard |  Leopold FC200 TKL (Browns) + GH36 Keypad (Browns/Greens) | GH-122 (Whites/Greens) with Nuclear Data Green keycaps in a Unicomp case

Offline Harrowed

  • Posts: 116
  • Location: Finland
  • My wallet has been hacked
Re: [IC] Latching cherry MX switches
« Reply #2 on: Sun, 24 August 2014, 08:09:59 »
7bit in Deskthority sells those too if enough orders are gathered. Price is 1,20€ per switch. They're in preorder phase right now but 7bit has said that he has way too few preorders right now for him to be able to fill the MOQ for those. Contact him and ask how many orders does he need and start gathering orders :thumb: http://deskthority.net/group-buys-f50/cherry-mx-taking-pre-orders-t2760.html
« Last Edit: Sun, 24 August 2014, 08:43:26 by Harrowed »
      
Ergodox MX Blues | Rosewill RK-9000

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] Latching cherry MX switches
« Reply #3 on: Sun, 24 August 2014, 08:38:11 »
You might want to change the title to Cherry Lock as that's what most people would call them.

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: [IC] Latching cherry MX switches
« Reply #4 on: Sun, 24 August 2014, 17:38:27 »
Spammy is right.

I call 'em MX Lock Switches.
I'd be in for 5 of them. Let's talk to 7 bit.

Offline korrelate

  • Posts: 407
  • Location: Virginia
  • iubeo stultum esse libenter
Re: [IC] Latching cherry MX switches
« Reply #5 on: Mon, 25 August 2014, 14:55:26 »
Dumb question but I've got to ask: when locked does the switch keep the contacts closed?

I totally want to use this as a keep-alive function on one of the +4 F positions on my 108.

You know what I mean? Sometimes I don't want to log off and I don't want my computer to sleep or time out on me. In these cases, I would just push this button.


Cheers,

K

Update: I'd buy 5-10 of these as well... if they're doing what I hope they're doing.
« Last Edit: Mon, 25 August 2014, 15:00:08 by korrelate »

Topre REALFORCE

Offline exitfire401

  • * Global Moderator
  • Posts: 2969
  • Location: United States
  • The Force is Re/\l
Re: [IC] Latching cherry MX switches
« Reply #6 on: Mon, 25 August 2014, 14:56:14 »
I'd also take 5-10
Boards: Kingsaver Complicated Blue Alps |Sprit 60% Transparent MX Clears in Gateron housings with 62g gold Sprit springs lubed and RGB color shifting LEDs | Ducky Shine Zone MX Black with Blue LEDs | Realforce 10AE Variable Silenced

B/S/T thread: https://geekhack.org/index.php?topic=55351.0

Past projects: KBT Race 2 L.E.
Past Boards: Ducky Shine 2 | KBT Pure | LZ Aluminum Skin| HHKB | Realforce 23u |

Offline Lastpilot

  • Power stance
  • * Esteemed Elder
  • Posts: 1463
  • Location: Louisiana
Re: [IC] Latching cherry MX switches
« Reply #7 on: Mon, 25 August 2014, 14:57:17 »
In for 10

Offline Rewind

  • Street Fighter
  • Posts: 210
  • Location: Amsterdam
  • Drive slow, homie
Re: [IC] Latching cherry MX switches
« Reply #8 on: Mon, 25 August 2014, 15:53:59 »
In for 5!

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches
« Reply #9 on: Mon, 25 August 2014, 16:08:04 »
Ok, looks like there's enough interest.  I'll check out the buy on deskthority too, if we can get it through them cheaper I can buy there too and send them out.
I can make acrylic laser cut cases/plates PM for info

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [IC] Latching cherry MX switches (locking)
« Reply #10 on: Mon, 25 August 2014, 17:38:28 »
In for 2. Its not much but it's all I can do.

Offline Grendel

  • Posts: 462
  • Location: OR, USA
    • Firmware for Costar Replacement Controllers
Re: [IC] Latching cherry MX switches (locking)
« Reply #11 on: Mon, 25 August 2014, 17:39:40 »
Interested in 10.
Currently using: RK-9000WH/GR, CMS QFXT w/ Ghost Squid
- I'm game !

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #12 on: Mon, 25 August 2014, 18:15:59 »
The deskthority thread isn't near their MOQ, but I posted to ask what the situation is.  Will report back when I have info.
I can make acrylic laser cut cases/plates PM for info

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 11462
  • Location: WI
Re: [IC] Latching cherry MX switches (locking)
« Reply #13 on: Mon, 25 August 2014, 20:12:09 »
I could use some more of these.  :)  I'm in for 5-10.

Offline Moralless

  • Posts: 526
  • Location: Sydney, Australia
Re: [IC] Latching cherry MX switches (locking)
« Reply #14 on: Mon, 25 August 2014, 20:27:27 »
I'd be in for 5-10 aswell.

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: [IC] Latching cherry MX switches (locking)
« Reply #15 on: Tue, 26 August 2014, 00:28:44 »
Just to update there's 77 counted for in this thread.
[taking 10 for everyone who said 5-10]

Offline Lurch

  • Posts: 1267
  • The only good system is a sound system.
Re: [IC] Latching cherry MX switches (locking)
« Reply #16 on: Tue, 26 August 2014, 05:52:39 »
In for 5
Quote from: Flyersfan1
im so glad you've stopped flipping the spacebar

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #17 on: Tue, 26 August 2014, 09:07:56 »
Update from the deskthority buy, their MOQ is 4000, we would need to order 800 to get the order to go through (about $1055 USD)  They would be only about $1.35 each though.
I can make acrylic laser cut cases/plates PM for info

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] Latching cherry MX switches (locking)
« Reply #18 on: Tue, 26 August 2014, 09:09:43 »
Update from the deskthority buy, their MOQ is 4000, we would need to order 800 to get the order to go through (about $1055 USD)  They would be only about $1.35 each though.

they have 3200 orders?? that is impressive. I asked and they don't have anywhere near MOQ  :)) ::)

At $1.35 I'll buy 20
« Last Edit: Tue, 26 August 2014, 09:48:28 by SpAmRaY »

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #19 on: Tue, 26 August 2014, 09:10:20 »
Pretty much means if we reach 150 switches ordered (at the above posted $7 per switch), it would be a better deal to go through deskthority.  :cool:  The deskthority buy turnaround is 60 days, the online components is 22 weeks.
« Last Edit: Tue, 26 August 2014, 09:18:35 by worldspawn »
I can make acrylic laser cut cases/plates PM for info

Offline Joey Quinn

  • Posts: 4543
  • Location: Houghton
  • "..."
Re: [IC] Latching cherry MX switches (locking)
« Reply #20 on: Tue, 26 August 2014, 09:57:57 »
Count me in!
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline BunnyLake

  • The OG HHKB Master
  • Posts: 7236
  • X
    • [CTRL]ALT
Re: [IC] Latching cherry MX switches (locking)
« Reply #21 on: Tue, 26 August 2014, 10:00:59 »
ill take 50
I'M IN THE PROCESS OF MOVING RIGHT NOW, WILL BE BACK AROUND SOON

Offline 7bit

  • Posts: 3629
  • Location: Deskthority.net
  • MX1A-G1DW
Re: [IC] Latching cherry MX switches (locking)
« Reply #22 on: Tue, 26 August 2014, 10:09:39 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches). 
What is their price when we order 800, or 1000 switches from them?

I got 460 orders plus those from this thread makes around 600.

Might be a way to get them sooner.
:-)
Buy key caps here: Round 5
Buy switches here: CherryMX

Offline redskull

  • Posts: 381
Re: [IC] Latching cherry MX switches (locking)
« Reply #23 on: Tue, 26 August 2014, 10:54:21 »
im in, not sure how many yet, will depend on the final pricing structure.

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: [IC] Latching cherry MX switches (locking)
« Reply #24 on: Tue, 26 August 2014, 11:36:03 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches). 
What is their price when we order 800, or 1000 switches from them?

I got 460 orders plus those from this thread makes around 600.

Might be a way to get them sooner.
:-)

yeah what is the next price break after 250?
if they're closer to $1.50 rather than $7 I'll naturally get at least twice as many.

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #25 on: Tue, 26 August 2014, 12:28:28 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches). 
What is their price when we order 800, or 1000 switches from them?

I got 460 orders plus those from this thread makes around 600.

Might be a way to get them sooner.

:-)

Price is $1055 USD for 800 switches
I can make acrylic laser cut cases/plates PM for info

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #26 on: Tue, 26 August 2014, 12:32:33 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches). 
What is their price when we order 800, or 1000 switches from them?

I got 460 orders plus those from this thread makes around 600.

Might be a way to get them sooner.
:-)

yeah what is the next price break after 250?
if they're closer to $1.50 rather than $7 I'll naturally get at least twice as many.

It's a sliding scale, since the smallest quantity I can order is 800 switches for $1055, the more ways the order is split the better the price gets.
onlinecomponents requires an order of 100 @~$7/switch, but deskthority has a deal at 800 switches for ~$1.35 per switch.  If we order more than 150 switches at $7 it becomes a better deal to just buy the 800 from deskthority and split the order quantity by giving everybody more switches.  The requirement here  is that the total money collected must be either $700 for the onlinecomponents, or $1055 for deskthority.
« Last Edit: Tue, 26 August 2014, 12:36:04 by worldspawn »
I can make acrylic laser cut cases/plates PM for info

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: [IC] Latching cherry MX switches (locking)
« Reply #27 on: Tue, 26 August 2014, 12:37:07 »
I thought deskthority was nowhere near the MOQ to get switches at $1.5
800/4000

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] Latching cherry MX switches (locking)
« Reply #28 on: Tue, 26 August 2014, 12:37:26 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches). 
What is their price when we order 800, or 1000 switches from them?

I got 460 orders plus those from this thread makes around 600.

Might be a way to get them sooner.
:-)

yeah what is the next price break after 250?
if they're closer to $1.50 rather than $7 I'll naturally get at least twice as many.

It's a sliding scale, since the smallest quantity I can order is 800 switches for $1055, the more ways the order is split the better the price gets.
onlinecomponents requires an order of 100 @~$7/switch, but deskthority has a deal at 800 switches for ~$1.35 per switch.  If we order more than 150 switches at $7 it becomes a better deal to just buy the 800 from deskthority and split the order quantity by giving everybody more switches.  The requirement here  is that the total money collected must be either $700 for the onlinecomponents, or $1055 for deskthority.

You realize the guy you quoted is 7bit from deskthority.....they don't have any lock switches either....they have an MOQ of 4000 and have 460 orders of their own....

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #29 on: Tue, 26 August 2014, 13:03:13 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches). 
What is their price when we order 800, or 1000 switches from them?

I got 460 orders plus those from this thread makes around 600.

Might be a way to get them sooner.
:-)

yeah what is the next price break after 250?
if they're closer to $1.50 rather than $7 I'll naturally get at least twice as many.

It's a sliding scale, since the smallest quantity I can order is 800 switches for $1055, the more ways the order is split the better the price gets.
onlinecomponents requires an order of 100 @~$7/switch, but deskthority has a deal at 800 switches for ~$1.35 per switch.  If we order more than 150 switches at $7 it becomes a better deal to just buy the 800 from deskthority and split the order quantity by giving everybody more switches.  The requirement here  is that the total money collected must be either $700 for the onlinecomponents, or $1055 for deskthority.

You realize the guy you quoted is 7bit from deskthority.....they don't have any lock switches either....they have an MOQ of 4000 and have 460 orders of their own....

Yes, I'm in direct contact with him about the specifics, but it looks like we can get them ordered through him relatively soon.
I can make acrylic laser cut cases/plates PM for info

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] Latching cherry MX switches (locking)
« Reply #30 on: Tue, 26 August 2014, 13:12:12 »
This is all somewhat confusing then because how can we get them if the MOQ is 4000 and together both places only have ~600 orders?

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #31 on: Tue, 26 August 2014, 14:26:20 »
Its a bit complicated, but we only need 800 to place our order.
I can make acrylic laser cut cases/plates PM for info

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: [IC] Latching cherry MX switches (locking)
« Reply #32 on: Tue, 26 August 2014, 14:54:40 »
so $1055 for 800 makes 1.31 a switch?
I'll take 25 at that price.

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] Latching cherry MX switches (locking)
« Reply #33 on: Tue, 26 August 2014, 14:55:49 »
And just to clarify these are genuine cherry mx lock switches right? There was a guy a while back trying to pass off some chinese knockoffs for cheap.

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #34 on: Tue, 26 August 2014, 15:06:23 »
Yes, 7bit said he was ordering direct from Cherry, and if I order it would be through onlinecomponents, which are an offcial Cherry distributor.
I can make acrylic laser cut cases/plates PM for info

Offline korrelate

  • Posts: 407
  • Location: Virginia
  • iubeo stultum esse libenter
Re: [IC] Latching cherry MX switches (locking)
« Reply #35 on: Tue, 26 August 2014, 16:05:48 »
All right... I did some googling and convinced myself that this is the switch that I want (I think so anyway).

http://deskthority.net/wiki/Cherry_MX_Lock

I think it's probably ridiculous to pay $7 a switch for these though. I mean seriously.. we really have to give 7bit a shot here.

Topre REALFORCE

Offline Grendel

  • Posts: 462
  • Location: OR, USA
    • Firmware for Costar Replacement Controllers
Re: [IC] Latching cherry MX switches (locking)
« Reply #36 on: Tue, 26 August 2014, 16:06:50 »
At $1.31 each I'm interested in 40.
Currently using: RK-9000WH/GR, CMS QFXT w/ Ghost Squid
- I'm game !

Offline korrelate

  • Posts: 407
  • Location: Virginia
  • iubeo stultum esse libenter
Re: [IC] Latching cherry MX switches (locking)
« Reply #37 on: Tue, 26 August 2014, 16:14:22 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches). 
What is their price when we order 800, or 1000 switches from them?

I got 460 orders plus those from this thread makes around 600.

Might be a way to get them sooner.
:-)

At onlinecomponents.com the pricing schedule looks like this:

100-249 :   $6.95
250 + :   $4.55

No discounts beyond 250.
Is there no other source?

The only other distributed who seems to carry them as far as I can tell is Sager:

http://www.eciaauthorized.com/search?pn=MX1A31NN


NOTE: I just submitted a request for quote @500 pieces to Sager (I reduced the total part count because of last minute GB defections/flakiness). I'll post an update as soon as I get word.

7bit: early on in this thread it sounded like you might have a lead on a better deal than $4.55USD @250 min. Is that correct? Just asking because I don't want to bark up the wrong tree or add to the confusion.


Cheers,

K
« Last Edit: Tue, 26 August 2014, 16:21:30 by korrelate »

Topre REALFORCE

Offline worldspawn

  • Thread Starter
  • Posts: 329
  • Location: Austin, TX
Re: [IC] Latching cherry MX switches (locking)
« Reply #38 on: Tue, 26 August 2014, 16:33:22 »
I really want a few latching switches (push on, push off) for function keys.  the only place I found to buy them is onlinecomponents.com  (http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424) They have a minimum 100 piece order requirement though (they are out of stock and their supplier requires batches of 100).  The switches cost $6.95 each (price break to $4.55 at 250 switches). 
What is their price when we order 800, or 1000 switches from them?

I got 460 orders plus those from this thread makes around 600.

Might be a way to get them sooner.
:-)

At onlinecomponents.com the pricing schedule looks like this:

100-249 :   $6.95
250 + :   $4.55

No discounts beyond 250.
Is there no other source?

The only other distributed who seems to carry them as far as I can tell is Sager:

http://www.eciaauthorized.com/search?pn=MX1A31NN


NOTE: I just submitted a request for quote @500 pieces to Sager (I reduced the total part count because of last minute GB defections/flakiness). I'll post an update as soon as I get word.

7bit: early on in this thread it sounded like you might have a lead on a better deal than $4.55USD @250 min. Is that correct? Just asking because I don't want to bark up the wrong tree or add to the confusion.


Cheers,

K

Looks like we can get them as low as $1.35 each through 7bit, but we need to group with him for an order of at least 800.
I can make acrylic laser cut cases/plates PM for info

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] Latching cherry MX switches (locking)
« Reply #39 on: Tue, 26 August 2014, 16:34:22 »
Seeing as how he already has ~460 orders that shouldn't be hard to do, especially at that price.

Offline geniekid

  • Posts: 763
  • Location: Chicago, IL
Re: [IC] Latching cherry MX switches (locking)
« Reply #40 on: Tue, 26 August 2014, 16:41:37 »
I'd buy at least 5 and up to 100 depending on the estimated price.

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] Latching cherry MX switches (locking)
« Reply #41 on: Tue, 26 August 2014, 16:42:37 »
up to 100 depending on the estimated price.

I want to see this magical keyboard made up of nothing but lock switches....:eek:

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: [IC] Latching cherry MX switches (locking)
« Reply #42 on: Tue, 26 August 2014, 17:41:43 »
up to 100 depending on the estimated price.

I want to see this magical keyboard made up of nothing but lock switches....:eek:

y wud u lock alphas?

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 11462
  • Location: WI
Re: [IC] Latching cherry MX switches (locking)
« Reply #43 on: Tue, 26 August 2014, 18:38:15 »
up to 100 depending on the estimated price.

I want to see this magical keyboard made up of nothing but lock switches....:eek:

Oh man!  I want to do this now!  You'd have to double tap everything.   :))

Offline geniekid

  • Posts: 763
  • Location: Chicago, IL
Re: [IC] Latching cherry MX switches (locking)
« Reply #44 on: Tue, 26 August 2014, 21:33:26 »
up to 100 depending on the estimated price.

I want to see this magical keyboard made up of nothing but lock switches....:eek:

Oh man!  I want to do this now!  You'd have to double tap everything.   :))

I just wanted extra switches, but now I want a full grid of lock keys for no real purpose :)

Offline Vintage

  • Posts: 460
  • Location: United States
Re: [IC] Latching cherry MX switches (locking)
« Reply #45 on: Tue, 26 August 2014, 21:47:30 »
In, depending on what the price ends up being.
CM QFR w/ MX Reds  | Logitech G900


Offline FrostyToast

  • Litshoard
  • * Exquisite Elder
  • Posts: 2368
  • Location: Canada
Re: [IC] Latching cherry MX switches (locking)
« Reply #46 on: Tue, 26 August 2014, 21:57:18 »
I would be in for 5 as it would be a novel thing to have if I ever do a custom board
Quote from: elton5354
I don't need anymore keyboards

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: [IC] Latching cherry MX switches (locking)
« Reply #47 on: Wed, 27 August 2014, 00:50:54 »
I would be in for 5 as it would be a novel thing to have if I ever do a custom board

i like them for function layers :)
change your whole board until you hit that key again

Offline apathy3cs

  • Glorious Leader
  • Posts: 70
  • Location: IL
  • その目だれの目?
Re: [IC] Latching cherry MX switches (locking)
« Reply #48 on: Wed, 27 August 2014, 00:52:26 »
These sound really interesting but I don't know if I'd find a use for them, less I was trying to get rid of the caps lock key and place one on the shift key to allow for caps lock functionality.

If you need help reaching MOQ I'd be willing to chip in for the novelty of it though.

Offline quake4mhg

  • Posts: 492
  • Location: BC, Canada
Re: [IC] Latching cherry MX switches (locking)
« Reply #49 on: Wed, 27 August 2014, 02:03:13 »
Please make a groupbuy, I still can't think how could this help my games & work. But I might get at least 5-10, more depends on the price.
« Last Edit: Wed, 27 August 2014, 13:45:58 by quake4mhg »