PLEASE READ. BY ORDERING YOU AGREE TO THESE TERMS and details.
This is the submission form to PURCHASE the Golbat 40% kit in the group buy.
Invoices will be sent out on January 21st, 2016 and payment must be received by January 22nd, 2016 to hold the spot.
A waiting list will be formed to fill the spots that are unpaid.
The order is FIRST COME FIRST SERVE. Meaning that the first submissions will be the highest on the list and the first to ship once the order arrives.
There are 50 orders for round one. One kit per person / household / username.
If you are taking the soldering service you must send me the LEDs / switches /stabilizers yourself. I will send my postal box information with the invoices should you choose this option. I will refuse any packages that have a customs charge attached. Mark your parcels as a gift for $20 to ensure there is no problem with customs.
If you're asking me to do the soldering service there is NO GUARANTEE of delivery time. I can only do them as my work and school schedule allow.
The PCB comes presoldered with the diodes and resistors so the only thing you need to make the board work is switches, stabilizers and a USB cable. However there are no switches, stabilizers, cables or LEDs included in this group buy.
The kit includes: 1 top plate (2 if you purchase the normal + HHKB option), 2 mid acrylic layers (one goes above the PCB and one goes under the PCB), 1 bottom plate and 1 PCB with resistors and diodes soldered on.
I am only the distributor in this deal. I will place the order for the kits and ship / distribute the kits. The wait time between ordering the kits from China and receiving them here in Canada is between 4-6 weeks. For that reason you must agree to waive your right to disputing the payment through PayPal since it is not possible for me to ship within the PayPal time frame.
Defective units will be handled in a way I deem most appropriate.
This could be offering partial refund or a different, spare part at your choice or, depending on the severity of the defect, request replacement parts from the manufacturer in the second round of orders.
The keyboards are custom order so once the order is placed / payment is received there will be no refunds if you decide to change your mind or anything of that sort.
The standard Golbat 40% set will cost $80USD + fees and shipping.
For an extra $15 the HHKB plate will be included (so you'll get both the standard plate and the HHKB style plate). This is $95USD + fees and shipping.
Shipping it being done from Quebec, Canada and should be $12-17USD anywhere in Canada with insurance for $200 CDN.
To ship to the USA the price is $15-20USD including insurance for $100CDN. (It's a big jump for the extra insurance).
If you require shipping elsewhere, expect at least $40-60 to Europe and $80 elsewhere for tracking and insurance. If you wish a quote before ordering, send me a message before placing the order to avoid cancellations.
Otherwise the default option will be "cheapest shipped with tracking"
The PayPal fees will be added to the invoice total and will be 3.9%.
Options:
Colors:
Aluminum:sliver, black, pink, blue, green,purple, gold http://imgsrc.baidu.com/forum/pic/item/9ec0381f95cad1c8298f95cd7a3e6709c83d51b6.jpg
Acrylic:you can choose the colors in this link:http://item.taobao.com/item.htm?spm=a1z10.1-c.w137644-66242819.2.ZNnbyp&id=19615052779
For the acrylic, please list both the item code from the images AND a cropped image of the specific color that you wanted so I can double check to avoid mistakes.
Please visit https://geekhack.org/index.php?topic=78080.0 for all the newest information and instructions on flashing.
YOU CANNOT CHANGE YOUR ANSWER ONCE SUBMITTED. IF YOU MADE A MISTAKE YOU MUST RESUBMIT THE FORM AND I WILL IGNORE THE FORM WITH THE MISTAKE. YOUR PLACE ON THE LIST IS THE TIME OF SUBMISSION OF THE REVISED FORM.
If it's just a typo like missing a letter in your email address that's fine but if you forget to completely answer a required question (somehow) well... that's a different story.
I know it's not practical for me but I can't stop myself from ordering one.
I know it's not practical for me but I can't stop myself from ordering one.
Can Europeans have the option to ship without tracking and take the responsibility?
Yes they can.
Just an example, air mail to Australia without tracking is $40 which is pretty hefty...
Feel free to PM me with your specific country / location for a quote. I'm also being optimistic about the final dimensions and weight but if they hit 1KG it's more expensive by a lot.
Yes they can.
Just an example, air mail to Australia without tracking is $40 which is pretty hefty...
Feel free to PM me with your specific country / location for a quote. I'm also being optimistic about the final dimensions and weight but if they hit 1KG it's more expensive by a lot.
Would it be much more expensive if we bundled orders together to Australia/overseas?
Yes they can.
Just an example, air mail to Australia without tracking is $40 which is pretty hefty...
Feel free to PM me with your specific country / location for a quote. I'm also being optimistic about the final dimensions and weight but if they hit 1KG it's more expensive by a lot.
Would it be much more expensive if we bundled orders together to Australia/overseas?
If you get 4+ to one place it would be cheaper
Ooft, 5am GMT. Hopefully they don't sell out before I'm up at 6!
Wooh, im quite hyped. Just a few questions:
1. Can you give us a list of what caps (apart from 1u) and how much of them we would need?
2. What do you mean by listing a cropped image for the acrylic? A link to pictures from Taobao? A cropped reupload to Imgur showing only one piece with the specific color?
Wooh, im quite hyped. Just a few questions:
1. Can you give us a list of what caps (apart from 1u) and how much of them we would need?
2. What do you mean by listing a cropped image for the acrylic? A link to pictures from Taobao? A cropped reupload to Imgur showing only one piece with the specific color?
Cropped upload since all the images are of 4-6 colors.
Bottom row is 1.25, 1, 1.25, 6.25, 1, 1.25
Or 1.25, 1, 1.25, 2.25, 2.75, 1.25, 1, 1.25
The HHKB layout drops the 1.25u at the ends
Wooh, im quite hyped. Just a few questions:
1. Can you give us a list of what caps (apart from 1u) and how much of them we would need?
2. What do you mean by listing a cropped image for the acrylic? A link to pictures from Taobao? A cropped reupload to Imgur showing only one piece with the specific color?
Cropped upload since all the images are of 4-6 colors.
Bottom row is 1.25, 1, 1.25, 6.25, 1, 1.25
Or 1.25, 1, 1.25, 2.25, 2.75, 1.25, 1, 1.25
The HHKB layout drops the 1.25u at the ends
I was more talking about the other rows, as you already stated the bottom row in the IC.
I'll be choosing the assembled option tonight ; can i reserve those zealios now , or has someone gotten them :p
I'll be choosing the assembled option tonight ; can i reserve those zealios now , or has someone gotten them :p
since I'll be offering to buy parts for people I can just order zealios that are in stock right now for those that want that since there were quite a few interested in the 65g zealios that I have right now.
I'll be choosing the assembled option tonight ; can i reserve those zealios now , or has someone gotten them :p
since I'll be offering to buy parts for people I can just order zealios that are in stock right now for those that want that since there were quite a few interested in the 65g zealios that I have right now.
sounds good! :thumb: Interesting that so many are taking advantage of the option ~ thought it was just a handful of us :))
many thanks
Glitch3d,
I like to recieve an assembled gobalt40 w/ zealios 65Gs too. What will be the price?
Hm, the color options are overwhelming. I was thinking the #840 Teal with the silver or purple alu. Kind of like a hyperfuse scheme. Thoughts?
Hm, the color options are overwhelming. I was thinking the #840 Teal with the silver or purple alu. Kind of like a hyperfuse scheme. Thoughts?
Up to you but keep in mind if you get in on the GB I can't change it once it's submitted.
If you're planning on doing bottom side lighting you can always just get a white frosted one and change the colors of the LEDs
Hm, the color options are overwhelming. I was thinking the #840 Teal with the silver or purple alu. Kind of like a hyperfuse scheme. Thoughts?
Up to you but keep in mind if you get in on the GB I can't change it once it's submitted.
If you're planning on doing bottom side lighting you can always just get a white frosted one and change the colors of the LEDs
Ah very true, that would look neat. Didn't realize I could even put side lighting on. Definitely relevant info.
GL1TCH3D, how much would it cost extra if you put two 2u stabs with my order?
GL1TCH3D, how much would it cost extra if you put two 2u stabs with my order?
No idea. I was only planning on calculating how much all the parts cost after the fact.
Unless you're not from the USA, it would probably be easier for you to order from a merchant
Show Image(http://images.tapatalk-cdn.com/16/01/11/627f3073b9f7b492d452fb37c127d8d9.jpg)
So there's no number, but I like that bottom left gold. Is that available?
Show Image(http://images.tapatalk-cdn.com/16/01/11/627f3073b9f7b492d452fb37c127d8d9.jpg)
So there's no number, but I like that bottom left gold. Is that available?
Yea just write gold flaked
If there's an issue with getting that one made I'll let you know.
Show Image(http://images.tapatalk-cdn.com/16/01/11/627f3073b9f7b492d452fb37c127d8d9.jpg)
So there's no number, but I like that bottom left gold. Is that available?
Yea just write gold flaked
If there's an issue with getting that one made I'll let you know.
Great. And is the form at midnight your time zone?
Any possibility of two sets of acrylic pieces?
Was I first? Hehe not
Was I first? Hehe not
Psh, ha. I was done in 4.5 seconds.
Halfway filled
If it's only 1 person wanting soldering I can ship it to someone who does soldering in your country... Sorry to say but I probably won't be buying a $100 worth of setup for 1 order =S
Yea, I might have to scrap the building / ordering parts if there's not enough interest in the end. However one person is more than welcome to buy the leftover zeals... how to decide that, eh...
Fixed the issue where people could see other responses (I think it's fixed?)
Also the questions asking if you need me to source the parts and which parts are optional :blank:
Also I see 1 person who wants soldering services and 3 people that requested partsShow Image(http://files.head-fi.org/images/smilies/confused_face_2.gif)
Fixed the issue where people could see other responses (I think it's fixed?)
Also the questions asking if you need me to source the parts and which parts are optional :blank:
Also I see 1 person who wants soldering services and 3 people that requested partsShow Image(http://files.head-fi.org/images/smilies/confused_face_2.gif)
Yea I said no to something when I meant to leave it blank, hope I didn't confuse you.
I've filled out my form but still not sure I picked the right acrylic color :(
Too many options.
I've filled out my form but still not sure I picked the right acrylic color :(
Too many options.
I spent so much time trying to decide which to choose that I got nervous I missed out on the buy. I never cared so much about nearly identical shades of green in my entire life.
I've filled out my form but still not sure I picked the right acrylic color :(
Too many options.
I spent so much time trying to decide which to choose that I got nervous I missed out on the buy. I never cared so much about nearly identical shades of green in my entire life.
Lots of spots left so don't worry.
I've filled out my form but still not sure I picked the right acrylic color :(
Too many options.
I spent so much time trying to decide which to choose that I got nervous I missed out on the buy. I never cared so much about nearly identical shades of green in my entire life.
Kid you not, I was dreaming about building this board when I woke up and realised the form had been open an hour.Maybe No.991 will give you a surprise. ;D
Black plate with orange acrylic, SkiData+ style.
Also, I'd be up for soldering for people in UK/EU. I've only enough stabs for my board though.
Could order a few sets though if there's any interest. Also going to get a big pack of Gateron Blacks.
Kid you not, I was dreaming about building this board when I woke up and realised the form had been open an hour.Maybe No.991 will give you a surprise. ;D
Black plate with orange acrylic, SkiData+ style.
Also, I'd be up for soldering for people in UK/EU. I've only enough stabs for my board though.
Could order a few sets though if there's any interest. Also going to get a big pack of Gateron Blacks.
I originally wanted to go w/ an NES themed colors, but changed my mind incase go w/ leds later. So, I went with a black aluminum case, a 3020 (light blue) translucent acrylic, and a 5020 (smoke grey) translucent acrylic. I believe, it'll allow me more key cap color options too. I'm really looking forward to this. I might going after an NES keyboard color theme the next round. Who knows. More than anything, thank you Glitch3d for making this this group buy possible!Willing to swap black top plates for golden plates?
Looks like we have the original 50 units ordered! (Once I remove duplicate submissions).
I'll start preparing the invoices for those 50. Since only 1 person needs assembly I'll visit gracious Nathan for that one unit.
Leaving the form open for waitlisters of course, however we shouldn't have too many drop outs (fingers crossed).
Thanks everyone! I'll write up clear instructions and make a video for flashing the keyboard.
Cheers, gl1tch3d
Looks like we have the original 50 units ordered! (Once I remove duplicate submissions).
I'll start preparing the invoices for those 50. Since only 1 person needs assembly I'll visit gracious Nathan for that one unit.
Leaving the form open for waitlisters of course, however we shouldn't have too many drop outs (fingers crossed).
Thanks everyone! I'll write up clear instructions and make a video for flashing the keyboard.
Cheers, gl1tch3d
Did you end up writing a TMK keymap for it? That would make me ever so happy.
Looks like we have the original 50 units ordered! (Once I remove duplicate submissions).
I'll start preparing the invoices for those 50. Since only 1 person needs assembly I'll visit gracious Nathan for that one unit.
Leaving the form open for waitlisters of course, however we shouldn't have too many drop outs (fingers crossed).
Thanks everyone! I'll write up clear instructions and make a video for flashing the keyboard.
Cheers, gl1tch3d
Did you end up writing a TMK keymap for it? That would make me ever so happy.
I will take a stab at doing it. I've used TMK before, but never set up a new project. I have a need for it as the GUI tool doesn't seem to support what I have in mind (or maybe it does and someone can show me?): tap for input 1 ('space' input), hold for input 2 (momentary layer 'Fn0').
Sorry,as of right now, I'm not interested in any trades. I want to see what it looks likes in my hands. If I'm not satisfied w/ the 5020 blackish grey acrylic when I receive it, I'm willing to follow up w/ you on your offer.I was talking about the aluminium plates, not the acrylic middle layers.
I can't decide on the color :/ need help on some combo colors
I already have a grey gon and blue grey orion I need something different.
Purple perhaps?
Looks like we have the original 50 units ordered! (Once I remove duplicate submissions).
I'll start preparing the invoices for those 50. Since only 1 person needs assembly I'll visit gracious Nathan for that one unit.
Leaving the form open for waitlisters of course, however we shouldn't have too many drop outs (fingers crossed).
Thanks everyone! I'll write up clear instructions and make a video for flashing the keyboard.
Cheers, gl1tch3d
Did you end up writing a TMK keymap for it? That would make me ever so happy.
I will take a stab at doing it. I've used TMK before, but never set up a new project. I have a need for it as the GUI tool doesn't seem to support what I have in mind (or maybe it does and someone can show me?): tap for input 1 ('space' input), hold for input 2 (momentary layer 'Fn0').
I can't decide on the color :/ need help on some combo colors
I already have a grey gon and blue grey orion I need something different.
Purple perhaps?
My apologies, I'm so excited about that color, & got side tracked when I responded. Getting back to your question......no, I'm don't want to swap my black aluminum plate.Sorry,as of right now, I'm not interested in any trades. I want to see what it looks likes in my hands. If I'm not satisfied w/ the 5020 blackish grey acrylic when I receive it, I'm willing to follow up w/ you on your offer.I was talking about the aluminium plates, not the acrylic middle layers.
If anybody would be willing to do such a swap, please pm me /write it here.
I can't decide on the color :/ need help on some combo colors
I already have a grey gon and blue grey orion I need something different.
Purple perhaps?
I'm getting purple aluminum and green acrylic to match the troubled minds set =P
I can't decide on the color :/ need help on some combo colors
I already have a grey gon and blue grey orion I need something different.
Purple perhaps?
I'm getting purple aluminum and green acrylic to match the troubled minds set =P
I can't decide on the color :/ need help on some combo colors
I already have a grey gon and blue grey orion I need something different.
Purple perhaps?
Gold top and black bottom hint hint
Oh man!! I missed it! Please keep me in mind for a round 2, or if there is a cancellation available. Been sick as a dog since Saturday. :(
first 20 invoices went out so far!
Got 1 payment already :P
ill pay send me my invoice :-*
ill pay send me my invoice :-*
Haha nice try :))
I'll let you know if there are cancellations but you are 4th on the waitlist
If you have any changes to your base order, please list them here since my inboxes are flooded with adjustments to invoices :thumb:
I haven't received requests for extra acrylic mid sections so I assume nobody is taking those?
If you have any changes to your base order, please list them here since my inboxes are flooded with adjustments to invoices :thumb:
Is there any way to purchase one of these from inside the US outside of this group buy? I just missed it :(
Paid! Damn you Canadian dollar, makes me sad.
You can't buy it from someone inside the US, but you (inside the US) can buy it through taobao via a proxy shipping service.
This link to taobao (http://world.taobao.com/item/520741513693.htm?fromSite=main&spm=a230r.1.14.1.p4mR3B&ns=1&abbucket=2#detail) has been posted in one of the golbat threads. But I think it's the same person who supplies for this buy (GFW), so I'm not sure he'll be selling before this GB is finished.You can't buy it from someone inside the US, but you (inside the US) can buy it through taobao via a proxy shipping service.
When I try to find this on Taobao, it looks like the only thing it brings up is a group buy? I can't be sure because google translate makes it very difficult to understand :(
:'(
:'(
iIRC you're 4th and there are still quite a few that haven't paid.
Still a work in progress, but this should be close to itShow Image(http://i.imgur.com/V2SxYgi.png)
Haven't used TKG, so I didn't know this wasn't possible. I was initially planning on just using Fn+space, but I wanted to make use of the empty key. I'm sure I'll find some other use for it then :pStill a work in progress, but this should be close to itShow Image(http://i.imgur.com/V2SxYgi.png)
I'm not sure how you can get the symbols onto a function layer. Have you done it with TKG?
Even when compiling TMK from scratch for my Planck I had a bunch of trouble with this. I had to use one of the function macros (you only get 32 of them) to assign "shift + number row" to each of the rows. Granted, it's been a while since I used the firmware.
Heading into the final stretch for payments.
Still missing some payments with no message from the buyer.
But otherwise there's 48 paid!
Heading into the final stretch for payments.
Still missing some payments with no message from the buyer.
But otherwise there's 48 paid!
O___O wow! Looking to be a fairly quick GB!
Is it a bad thing that I feel like a kid the day before christmas since the GB started? The coming weeks will be very long :(
Is it a bad thing that I feel like a kid the day before christmas since the GB started? The coming weeks will be very long :(
It's best to feel like a kid when it arrives =P
Is it a bad thing that I feel like a kid the day before christmas since the GB started? The coming weeks will be very long :(
It's best to feel like a kid when it arrives =P
Then I have to get a responsible adult to solder it.
Is it a bad thing that I feel like a kid the day before christmas since the GB started? The coming weeks will be very long :(
It's best to feel like a kid when it arrives =P
Then I have to get a responsible adult to solder it.
Hey I did offer
Is it a bad thing that I feel like a kid the day before christmas since the GB started? The coming weeks will be very long :(
It's best to feel like a kid when it arrives =P
Then I have to get a responsible adult to solder it.
Hey I did offer
Nah, I still have to modify the switches. And LEDs placed inside the switch housings would probably arrive with bent legs. But you can supervise me if you want. Just come to Germany, be my guest and bring a Golbat with you. ^^
Is it a bad thing that I feel like a kid the day before christmas since the GB started? The coming weeks will be very long :(
It's best to feel like a kid when it arrives =P
Then I have to get a responsible adult to solder it.
Hey I did offer
Nah, I still have to modify the switches. And LEDs placed inside the switch housings would probably arrive with bent legs. But you can supervise me if you want. Just come to Germany, be my guest and bring a Golbat with you. ^^
I'll gladly come if you pay for the plane ticket. Never been outside of north america.
I'll bring the mobik and realforce hipro TKL with me too which is $1000 worht of boards right thre =)
Is it a bad thing that I feel like a kid the day before christmas since the GB started? The coming weeks will be very long :(
It's best to feel like a kid when it arrives =P
Then I have to get a responsible adult to solder it.
Hey I did offer
Nah, I still have to modify the switches. And LEDs placed inside the switch housings would probably arrive with bent legs. But you can supervise me if you want. Just come to Germany, be my guest and bring a Golbat with you. ^^
I'll gladly come if you pay for the plane ticket. Never been outside of north america.
I'll bring the mobik and realforce hipro TKL with me too which is $1000 worht of boards right thre =)
Aren't there plane tickets included with shipping something to another country via Canada Post? Should be, considering how much they charge for packages.
I too am interested in extra acrylic plates. is it too late?
If you're making the request today for the extra acrylic then I'll give you an extra day to pay it (I'll assume you won't skip out since you paid the rest of the order).
Otherwise all payments are due by the end of today!
If you're making the request today for the extra acrylic then I'll give you an extra day to pay it (I'll assume you won't skip out since you paid the rest of the order).
Otherwise all payments are due by the end of today!
Got an update for us, GL1TCH3D?
I've closed all the unpaid invoices. There are a total of 55 units paid for.If you're making the request today for the extra acrylic then I'll give you an extra day to pay it (I'll assume you won't skip out since you paid the rest of the order).
Otherwise all payments are due by the end of today!
Got an update for us, GL1TCH3D?
All the orders have been submitted and I'm waiting for the invoice to pay.
If you're making the request today for the extra acrylic then I'll give you an extra day to pay it (I'll assume you won't skip out since you paid the rest of the order).
Otherwise all payments are due by the end of today!
Got an update for us, GL1TCH3D?
I've closed all the unpaid invoices. There are a total of 55 units paid for.
All the orders have been submitted and I'm waiting for the invoice to pay.
I keep forgetting I got this. Need to get on getting some more switches for this little guy in the waiting period haha.
I keep forgetting I got this. Need to get on getting some more switches for this little guy in the waiting period haha.
Because it's increased to 50 units the waiting period is a bit longer =(
I keep forgetting I got this. Need to get on getting some more switches for this little guy in the waiting period haha.
Because it's increased to 50 units the waiting period is a bit longer =(
I keep forgetting I got this. Need to get on getting some more switches for this little guy in the waiting period haha.
Because it's increased to 50 units the waiting period is a bit longer =(
In the mean time you should post pics of yours :D
http://imgur.com/a/3FqWJ
Album is up of the sample. First time I'm trying the lightbox so go easy :P
Also kind of rushed so no post editing on those images.
Right now it's just single kits... Getting additional acrylic mid sections would mean invoicing would be a lot more annoying, shipping costs could be tipped over the break point (1KG) and it may or may not increase production lead times. Possibly for round two I'll just order a bunch of extra parts along with the main order but right now I'm keeping it simple and straightforward.
I have my Zealios switches(65g) order in and my Deep Space keycaps just arrived. Time to get my soldering station ready and clear my schedule.
I have my Zealios switches(65g) order in and my Deep Space keycaps just arrived. Time to get my soldering station ready and clear my schedule.
I'm going with 78g zealios and probably a set of shadovved's PBT blanks. Can't wait to see everyone's board fully assembled!
I have my Zealios switches(65g) order in and my Deep Space keycaps just arrived. Time to get my soldering station ready and clear my schedule.
I'm going with 78g zealios and probably a set of shadovved's PBT blanks. Can't wait to see everyone's board fully assembled!
Just ordered 2 120 packs of Gateron's (80g green clicky & 50g yellow linear) from Massdrop. So, I'm ready for my Golbat40!
Just ordered 2 120 packs of Gateron's (80g green clicky & 50g yellow linear) from Massdrop. So, I'm ready for my Golbat40!
Don't think you'll need that many switches for this board haha :p
Just ordered 2 120 packs of Gateron's (80g green clicky & 50g yellow linear) from Massdrop. So, I'm ready for my Golbat40!
Especially with the spacebar you might want to get PCB mount
Especially with the spacebar you might want to get PCB mount
I always get pcb mount. Worst case scenario, a couple snips with your flush cutters and you've got plate mount switches.
I've ordered some more 65g Zealios (plain Jane, I know) and gateron reds for this build.
Just ordered 2 120 packs of Gateron's (80g green clicky & 50g yellow linear) from Massdrop. So, I'm ready for my Golbat40!
Go back and update your choice of PCB or Plate mount. They added the option to choose, and it defaults to Plate mount.
Boop
The guide for creating your firmware is up
BoopAwesome! Can't wait for mine to come.
The guide for creating your firmware is up
BoopOkay I downloaded trojan.exe and now there is text all over my wallpaper.
The guide for creating your firmware is up
BoopOkay I downloaded trojan.exe and now there is text all over my wallpaper.
The guide for creating your firmware is up
edit: apparently i bought a ticket to the bahamas
I need some 58g zealios :'(
I need some 58g zealios :'(
I made sure to order enough Zeal's cause I was either going in on the golbat or a planck. Hopefully your shipment will time up nicely with my zeal order. :)
Bumpity
Posted an update to the main thread
End of April? Awesome! It'll also eliminate any worry about crossing the border twice, so I'm all for it.
Figures Andy would get the exclusive writeup before we all receive our boards though. Ha! ;D
End of April? Awesome! It'll also eliminate any worry about crossing the border twice, so I'm all for it.
Figures Andy would get the exclusive writeup before we all receive our boards though. Ha! ;D
Well I had the sample before which nathan got to try before too.
And then I passed it off to FLFisherman so the sample is floating around somewhere :P
Update!
Got news that the cases are now completed and just waiting on the PCBs before shipping everything out.
livingspeedbump has also agreed to receive the order from china to distribute the USA orders (the bulk of the orders) so depending on the shipping from china and PCBs, it might be possible to have the USA orders delivered before the end of April.
However this will most likely not result in shipping discounts, but I'll have to tally that up in the end to see if there's money from the shipping fund to send back.
If anybody has an issue with this please bring it up before the order is shipped.
Thanks, GL1TCH3D
Update!
Got news that the cases are now completed and just waiting on the PCBs before shipping everything out.
livingspeedbump has also agreed to receive the order from china to distribute the USA orders (the bulk of the orders) so depending on the shipping from china and PCBs, it might be possible to have the USA orders delivered before the end of April.
However this will most likely not result in shipping discounts, but I'll have to tally that up in the end to see if there's money from the shipping fund to send back.
If anybody has an issue with this please bring it up before the order is shipped.
Thanks, GL1TCH3D
I also forgot to mention that Krytone agreed to make a specialized bat keycap that I will distribute to buyers of this golbat group buy in a raffle style :cool:
However with his recent baby and sales it probably won't line up with shipping.
Looks as though it's to accommodate the USB port.Show Image(http://i.imgur.com/J3OeMXY.jpg)
Looks as though it's to accommodate the USB port.Show Image(http://i.imgur.com/J3OeMXY.jpg)
couldn't they have notched one piece like GON's?
I also forgot to mention that Krytone agreed to make a specialized bat keycap that I will distribute to buyers of this golbat group buy in a raffle style :cool:Golbat Krap to go with it?
However with his recent baby and sales it probably won't line up with shipping.
Looks as though it's to accommodate the USB port.Show Image(http://i.imgur.com/J3OeMXY.jpg)
couldn't they have notched one piece like GON's?
The top layer fits over the PCB and has switch cutouts. While the bottom layer is just the edging around. As for why it couldn't just be one taller edge around the PCB it's probably to keep the case smaller overall.
Any idea how many Golbat caps there will be and what cost will be like? I am excited for a chance at a unique artisan.
I'll be giving them out for free as a thanks through raffle (or if shipping costs drastically change going through livinspeedbump I can offer raffle tickets for the caps to cover the different).
But otherwise everyone should have a fair shot at one.
I'll be giving them out for free as a thanks through raffle (or if shipping costs drastically change going through livinspeedbump I can offer raffle tickets for the caps to cover the different).
But otherwise everyone should have a fair shot at one.
Will the caps be shipped to the winners separately or with the Golbat kits? That would be pretty cool to not know who won until they all get shipped out.
Either way keep us updated and I am excited to see the caps!
I realize I am so super late to this party, but is there any chance you have another slot opened up, or would be setting up a round 2 on this?
What colors have you ordered?
I would definitely be up for that. Are we talking a straight transfer, or are you asking for more $$ than the GB? ...Ill PM you.Straight transfer I'm no punk. :-) I did purchase two colors. Glitch3d should hopefully be able to sort it out.
Haven't heard back about the PCBs yet =SHey Glitch3d what's the best way to transfer my order over should I have him PayPal you or me?
Haven't heard back about the PCBs yet =SHey Glitch3d what's the best way to transfer my order over should I have him PayPal you or me?
Seems like it would be safer to paypal directly to you Glitch. ...I actually filed out the order form, not expecting anything to come from it, but you should have my info. Either way, email an invoice, and I have money waiting.
Haven't heard back about the PCBs yet =S
Haven't heard back about the PCBs yet =S
Haven't heard back about the PCBs yet =S
:( someday we'll have a dope 40 no rush
Haven't heard back about the PCBs yet =S
:( someday we'll have a dope 40 no rush
At the very least it's the cheapest GB with an aluminum case IIRC?
Haven't heard back about the PCBs yet =S
:( someday we'll have a dope 40 no rush
At the very least it's the cheapest GB with an aluminum case IIRC?
Haven't heard back about the PCBs yet =S
:( someday we'll have a dope 40 no rush
At the very least it's the cheapest GB with an aluminum case IIRC?
Compared to some of the other 40% ish layouts that have been up recently I think the Golbat has been both the cheapest and my favorite layout. I've also always really liked sandwich style cases, especially on smaller form factor boards.
Haven't heard back about the PCBs yet =S
:( someday we'll have a dope 40 no rush
At the very least it's the cheapest GB with an aluminum case IIRC?
Compared to some of the other 40% ish layouts that have been up recently I think the Golbat has been both the cheapest and my favorite layout. I've also always really liked sandwich style cases, especially on smaller form factor boards.
I can't wait to see the themes that people come up with :P
As I mentioned earlier I'm putting troubled minds on a purple alu and green acrylic board.
Also as a quick update I haven't heard back from GFW about the PCBs
So I was going to do an April Fools day joke saying that the boards were already shipped except that they actually should be shipping soon. I got word today that the PCBs are finished and GFW is packing everything.
So I was going to do an April Fools day joke saying that the boards were already shipped except that they actually should be shipping soon. I got word today that the PCBs are finished and GFW is packing everything.Woohoo my zealios just came in so I'm ready to get building.
So I was going to do an April Fools day joke saying that the boards were already shipped except that they actually should be shipping soon. I got word today that the PCBs are finished and GFW is packing everything.
Oiiiii
Good news =)
Over half the boards have been checked / packed by GFW so we should expect shipping from China to leave soon.
Oiiiii
Good news =)
Over half the boards have been checked / packed by GFW so we should expect shipping from China to leave soon.
Oiiiii
Good news =)
Over half the boards have been checked / packed by GFW so we should expect shipping from China to leave soon.
Eeeeeek!
And I hate to say it, but I think I need to pm for another(and final) address change.
Oiiiii
Good news =)
Over half the boards have been checked / packed by GFW so we should expect shipping from China to leave soon.
Oiiiii
Good news =)
Over half the boards have been checked / packed by GFW so we should expect shipping from China to leave soon.
WOOH! Now only another 5 to ... weeks of waiting! I still need to get some stabs.
The shipping from China will probably take less than the trip US -> Canada -> Germany. But I think this kit will definitely be worth the wait.Oiiiii
Good news =)
Over half the boards have been checked / packed by GFW so we should expect shipping from China to leave soon.
WOOH! Now only another 5 to ... weeks of waiting! I still need to get some stabs.
Yea shipping from china is iffy for time. Hopefully not too long though.
Packing over in China is just about done. Shipping to North America should be about a week.
Hate to be that guy, but if anyone wants to back out I'd love to pick up a set!
(Sorry if this is not allowed HappyCatFish, will delete post if it's a problem!)
Thanks!!
One of the boards didn't pass inspection so another one is being manufactured
One of the boards didn't pass inspection so another one is being manufactured
Does that mean there is b-stock available?
Whoo! Thanks for the update!
So is the plan for you to ship all the U.S. destined boards to LivingSpeedBump and then he distributes them to us? I understand that it might save some money but it sounds like it will extend the wait time for us by quite a bit.
There was no low fee alternative unfortunately... So I'll be distributing them all from Canada
Especially for North American orders they should arrive by the end of may
Especially for North American orders they should arrive by the end of may
Is the form still up for address change?
Especially for North American orders they should arrive by the end of may
Is the form still up for address change?
It should still be up! if it's not working let me know
I will be closing the form TOMORROW which is also when I should be receiving the order.Woohoo, any estimate on the turn around time for the shipping on your side
That way there's no confusion with last minute changes after shipping the parcels.
Very excited for this to get here!! :-*
I've seen a couple others do Bluetooth mods to their 40% keyboards--does anyone have a clue about where to get some information pertaining to such a mod? Or has had experience modding their keyboards to be bluetooth? I've poked around but haven't found much aside from crappy quality kits on amazon :-[ A 40% Bluetooth Golbat would be beyond sweet!
I just paid the DHL import fees and it's cleared canada customs :thumb:
I just paid the DHL import fees and it's cleared canada customs :thumb:
Can we get pictures when you have the keyboards? I'm so excited.
So this definitely took longer than I originally estimated so I'll make sure to adjust my timing for any future GBs I do.
http://m.imgur.com/PcKG9dq
I'll be unpacking, checking and repacking starting today.
So this definitely took longer than I originally estimated so I'll make sure to adjust my timing for any future GBs I do.
http://m.imgur.com/PcKG9dq
I'll be unpacking, checking and repacking starting today.
Sweet, can't wait to get my hands on this board. Plus I don't remember what color acrylics I went with so it'll be a surprise when I open the box.
So this definitely took longer than I originally estimated so I'll make sure to adjust my timing for any future GBs I do.
http://m.imgur.com/PcKG9dq
I'll be unpacking, checking and repacking starting today.
https://imgur.com/a/wlRXF
Good news: additional screws were included as well as a wrench and some LEDs (SMD) for those that want to do the under light like I did in the sample.
Boxes were also included for all the golbats so I'll be buying additional bubble wrap to fill in the spaces.
Bad news: on a quick inspection of a few of the boards, there is some light scratching on the back of the keyboards. Also one of the boards had 3 acrylic mid sections instead of 2 which I believe might be the board that had to be remade.
But at least I didn't see any broken parts.
Before you go asking for $50 back please do consider this is still an aluminum sandwich style board for $80.
I'll be sorting and checking to make sure there are no broken parts or missing parts to the orders and contacting those who's orders don't match what they asked/paid for. (3section acrylic mids, missing HHKB plates, etc)
I have a job interview Friday too =S
So the good news is that the interview went very well!
The kind of good news is that I've been slowly working through the order checking.
The kind of bad news is that I was asked to do tons of supplementary shifts this week for my current job (which is on/off during the summer).
The bad news is that a decent portion of the orders I've checked had some sort of scratching. Mostly on the bottom plate but 1 in particular had a scratch on the top plate along the edge which would be noticeable when you look at your keyboard. Of course there's the order with the triple acrylic mid section... I'm going to have to ask GFW what happened with that one, maybe it was the specific acrylic color, I have no idea. Also the gold flake acrylic only has gold flake on the faces of the plates which means you really can't see it when it's sandwiched between the aluminum plates =/
I did receive a spare set of acrylic, the same orange from the sample that I received last year. This will be offered to someone if their acrylic is broken, then after to the person (people?) who have triple stacked acrylic and finally if none of the above apply, to be purchased as an extra if someone is interested.
It's not feasible to remake all the parts and spend another $200+ on shipping for new aluminum / acrylic (especially since GFW didn't account for fees properly and ended up with less than expected, we decided that since orders were paid for already that we wouldn't ask for more) so it is what it is in this GB.
I'll hopefully ship out the first 10-20 orders this week since there's a good portion that are defect free aesthetically.
So the good news is that the interview went very well!
The kind of good news is that I've been slowly working through the order checking.
The kind of bad news is that I was asked to do tons of supplementary shifts this week for my current job (which is on/off during the summer).
The bad news is that a decent portion of the orders I've checked had some sort of scratching. Mostly on the bottom plate but 1 in particular had a scratch on the top plate along the edge which would be noticeable when you look at your keyboard. Of course there's the order with the triple acrylic mid section... I'm going to have to ask GFW what happened with that one, maybe it was the specific acrylic color, I have no idea. Also the gold flake acrylic only has gold flake on the faces of the plates which means you really can't see it when it's sandwiched between the aluminum plates =/
I did receive a spare set of acrylic, the same orange from the sample that I received last year. This will be offered to someone if their acrylic is broken, then after to the person (people?) who have triple stacked acrylic and finally if none of the above apply, to be purchased as an extra if someone is interested.
It's not feasible to remake all the parts and spend another $200+ on shipping for new aluminum / acrylic (especially since GFW didn't account for fees properly and ended up with less than expected, we decided that since orders were paid for already that we wouldn't ask for more) so it is what it is in this GB.
I'll hopefully ship out the first 10-20 orders this week since there's a good portion that are defect free aesthetically.
My poor gold :(
Sent from my iPhone using Tapatalk
So the good news is that the interview went very well!Glad to hear the job interview went well!
The kind of good news is that I've been slowly working through the order checking.
The kind of bad news is that I was asked to do tons of supplementary shifts this week for my current job (which is on/off during the summer).
The bad news is that a decent portion of the orders I've checked had some sort of scratching. Mostly on the bottom plate but 1 in particular had a scratch on the top plate along the edge which would be noticeable when you look at your keyboard. Of course there's the order with the triple acrylic mid section... I'm going to have to ask GFW what happened with that one, maybe it was the specific acrylic color, I have no idea. Also the gold flake acrylic only has gold flake on the faces of the plates which means you really can't see it when it's sandwiched between the aluminum plates =/
I did receive a spare set of acrylic, the same orange from the sample that I received last year. This will be offered to someone if their acrylic is broken, then after to the person (people?) who have triple stacked acrylic and finally if none of the above apply, to be purchased as an extra if someone is interested.
It's not feasible to remake all the parts and spend another $200+ on shipping for new aluminum / acrylic (especially since GFW didn't account for fees properly and ended up with less than expected, we decided that since orders were paid for already that we wouldn't ask for more) so it is what it is in this GB.
I'll hopefully ship out the first 10-20 orders this week since there's a good portion that are defect free aesthetically.
I really don't mind about scratches (bottom or top) to be honest :)
I can probably help out with some shipping duties if the need arises :thumb:
Some boards have started going out so the first ones should be received next week :thumb:Awesome
Some boards have started going out so the first ones should be received next week :thumb:
Some boards have started going out so the first ones should be received next week :thumb:
It just occurred to me that the HHKB plate was extra, right?
If that IS the case I'll have an extra top plate that I won't need.
If Glitched wants to contact the person with the scratched top plate and throw my top plate in with that order, im more than OK with that. I just wanted the HHKB plate :thumb:
It just occurred to me that the HHKB plate was extra, right?
If that IS the case I'll have an extra top plate that I won't need.
If Glitched wants to contact the person with the scratched top plate and throw my top plate in with that order, im more than OK with that. I just wanted the HHKB plate :thumb:
Yes the HHKB was an additional fee and added onto the orders along with the normal plates
Cool deal, then yeah, just hold my normal plate to the side and do what you see fit with it :thumb: Not worried on any refund any crap like that.
MUCH EXCITE!
Is there a notification if yours went out or will it just show up? I do like surprises
Sent from my iPhone using Tapatalk
MUCH EXCITE!
Is there a notification if yours went out or will it just show up? I do like surprises
Sent from my iPhone using Tapatalk
Surprise!
MUCH EXCITE!
Is there a notification if yours went out or will it just show up? I do like surprises
Sent from my iPhone using Tapatalk
Surprise!
My spreadsheet got a bit messy.
I didn't get the job unfortunately :'(
So I'll have a bit more time this week to finish up orders.
My spreadsheet got a bit messy.
I didn't get the job unfortunately :'(
So I'll have a bit more time this week to finish up orders.
Were any kits shipped this week?
Lubing and putting stickers on black switches tonight, getting ready! :D
Sent from my iPhone using Tapatalk
I'll hopefully have the remainder of the orders fulfilled tomorrow. Once all the main orders are fulfilled I'll be in contact with those with defective units to decide if orders will be added on to round 2 (I'd it happens) or if small refunds will be made. I'll be in touch with GFW too. Cheers!
I'll hopefully have the remainder of the orders fulfilled tomorrow. Once all the main orders are fulfilled I'll be in contact with those with defective units to decide if orders will be added on to round 2 (I'd it happens) or if small refunds will be made. I'll be in touch with GFW too. Cheers!
When will we know whether our order has shipped out / is defective?
Sweet so does that mean if we haven't gotten a message that our boards are defect free and head our way?I'll hopefully have the remainder of the orders fulfilled tomorrow. Once all the main orders are fulfilled I'll be in contact with those with defective units to decide if orders will be added on to round 2 (I'd it happens) or if small refunds will be made. I'll be in touch with GFW too. Cheers!
When will we know whether our order has shipped out / is defective?
I've started sending out messages on the forums to those impacted. There are 4 orders impacted. One of them is completely missing but a similar kit showed up. Only 1 order has damage to a visible area and 2 have triple acrylic sections instead of double acrylic but it really doesn't change the look at all so I'll probably send those out without delay.
Otherwise there are 2 orders with significant scratching on places that won't be visible during normal use but I'd like to at least inform those 2 people.
GL1TCH3D delivers :thumb:Looking sexy, can't wait for mine to get here.Show Image(http://i.imgur.com/lYnibbo.jpg)
Purple happy plate with 422 "opal" acrylic, MX clear stems in gateron housings and 55g springs. Think I might put the ghost white PBT caps on it, not 100% at this point ^-^
GL1TCH3D delivers :thumb:Show Image(http://i.imgur.com/lYnibbo.jpg)
Purple happy plate with 422 "opal" acrylic, MX clear stems in gateron housings and 55g springs. Think I might put the ghost white PBT caps on it, not 100% at this point ^-^
Just another reminder for those that may have missed it, there are extra screws / bolts included in the box as well as a small wrench for the screws and some surface mount LEDs to place on the back side if you wish to do so.
Cheers! Can't wait to see them built!
Just another reminder for those that may have missed it, there are extra screws / bolts included in the box as well as a small wrench for the screws and some surface mount LEDs to place on the back side if you wish to do so.
Cheers! Can't wait to see them built!
Do you have a link to where there's info to put on the LEDs? I'm on tapatalk and it's hard to find stuff, heh
Just another reminder for those that may have missed it, there are extra screws / bolts included in the box as well as a small wrench for the screws and some surface mount LEDs to place on the back side if you wish to do so.
Cheers! Can't wait to see them built!
Do you have a link to where there's info to put on the LEDs? I'm on tapatalk and it's hard to find stuff, heh
Unfortunately LEDs are done the hard way. Do you mean for firmware or soldering?
Just another reminder for those that may have missed it, there are extra screws / bolts included in the box as well as a small wrench for the screws and some surface mount LEDs to place on the back side if you wish to do so.
Cheers! Can't wait to see them built!
Do you have a link to where there's info to put on the LEDs? I'm on tapatalk and it's hard to find stuff, heh
Unfortunately LEDs are done the hard way. Do you mean for firmware or soldering?
I really have no idea, both I guess
Just another reminder for those that may have missed it, there are extra screws / bolts included in the box as well as a small wrench for the screws and some surface mount LEDs to place on the back side if you wish to do so.
Cheers! Can't wait to see them built!
Do you have a link to where there's info to put on the LEDs? I'm on tapatalk and it's hard to find stuff, heh
Unfortunately LEDs are done the hard way. Do you mean for firmware or soldering?
I really have no idea, both I guess
Okay so the thing with the golbat is that there's no pads specific for leds on the back of the pcb, you use the through-hole pads that are meant for the in switch LEDs and you solder them on the back of those.
Ugh, still not here in northern Ontario :(
Sent from my iPhone using Tapatalk
Ugh, still not here in northern Ontario :(
Sent from my iPhone using Tapatalk
USA ones were the first to go out since they were the majority at IIRC 45 of the orders.
And for yours I used the address you submitted in the change form and I remember the canada post clerk telling me that your postal code could not be found so she had to do some workarounds in the computer but maybe it's slow in the mail stream because of that.
I looked it up on my phone while at the counter and it seems exist. Hope it gets here fine!
And next time I'll have to get printer and get some more automated invoicing / label creation because doing everything by hand is not terribly fun =P
Just built it. Everything works as expected. I went with the in-switch leds (couldn't get underside LEDs to light up when I added them, too much of a drain on the system).okay, but why hhkb layout on an already reduced layout.
Quick cell phone pics:Show Image(http://i.imgur.com/vTrfltE.jpg)Show Image(http://i.imgur.com/1GyxLlm.jpg)Show Image(http://i.imgur.com/Ln1OC7g.jpg)Show Image(http://i.imgur.com/dDukAoC.jpg)
I'm using blank 'Ghost White' PBT caps.
Just built it. Everything works as expected. I went with the in-switch leds (couldn't get underside LEDs to light up when I added them, too much of a drain on the system).okay, but why hhkb layout on an already reduced layout.
Quick cell phone pics:Show Image(http://i.imgur.com/vTrfltE.jpg)Show Image(http://i.imgur.com/1GyxLlm.jpg)Show Image(http://i.imgur.com/Ln1OC7g.jpg)Show Image(http://i.imgur.com/dDukAoC.jpg)
I'm using blank 'Ghost White' PBT caps.
that just makes the keyboard even more of a struggle to use
Just built it. Everything works as expected. I went with the in-switch leds (couldn't get underside LEDs to light up when I added them, too much of a drain on the system).
Quick cell phone pics:Show Image(http://i.imgur.com/vTrfltE.jpg)Show Image(http://i.imgur.com/1GyxLlm.jpg)Show Image(http://i.imgur.com/Ln1OC7g.jpg)Show Image(http://i.imgur.com/dDukAoC.jpg)
I'm using blank 'Ghost White' PBT caps.
It's still counterintuitive. In a 40% you should be making the most out of every single key. Meh it's just me but I already believe the Hhkb layout is a struggle enough and now 40%+Hhkb .-.Just built it. Everything works as expected. I went with the in-switch leds (couldn't get underside LEDs to light up when I added them, too much of a drain on the system).okay, but why hhkb layout on an already reduced layout.
Quick cell phone pics:Show Image(http://i.imgur.com/vTrfltE.jpg)Show Image(http://i.imgur.com/1GyxLlm.jpg)Show Image(http://i.imgur.com/Ln1OC7g.jpg)Show Image(http://i.imgur.com/dDukAoC.jpg)
I'm using blank 'Ghost White' PBT caps.
that just makes the keyboard even more of a struggle to use
Because those switch positions are the worst and I'm using Fn layers.
It's pretty easy to claim all 40% keyboards are hard to use so I don't know why two keys would be anyone's breaking point.
It's still counterintuitive. In a 40% you should be making the most out of every single key. Meh it's just me but I already believe the Hhkb layout is a struggle enough and now 40%+Hhkb .-.Just built it. Everything works as expected. I went with the in-switch leds (couldn't get underside LEDs to light up when I added them, too much of a drain on the system).okay, but why hhkb layout on an already reduced layout.
Quick cell phone pics:Show Image(http://i.imgur.com/vTrfltE.jpg)Show Image(http://i.imgur.com/1GyxLlm.jpg)Show Image(http://i.imgur.com/Ln1OC7g.jpg)Show Image(http://i.imgur.com/dDukAoC.jpg)
I'm using blank 'Ghost White' PBT caps.
that just makes the keyboard even more of a struggle to use
Because those switch positions are the worst and I'm using Fn layers.
It's pretty easy to claim all 40% keyboards are hard to use so I don't know why two keys would be anyone's breaking point.
Just built it. Everything works as expected. I went with the in-switch leds (couldn't get underside LEDs to light up when I added them, too much of a drain on the system).I love your build & keycap choice. I was one of the people w/ a kit issue, so I'm definitely looking forward to mine once I get it. I'm shooting for an hhkb 40% set up too. Again, great looking 40!
Quick cell phone pics:Show Image(http://i.imgur.com/vTrfltE.jpg)Show Image(http://i.imgur.com/1GyxLlm.jpg)Show Image(http://i.imgur.com/Ln1OC7g.jpg)Show Image(http://i.imgur.com/dDukAoC.jpg)
I'm using blank 'Ghost White' PBT caps.
When it comes to 40% the keys on the corners make a huge difference, that being said I made the HHKB version myself anyway...No problem Gl1tch3d,
Again, sorry about what happened William! Working to getting you the HHKB plate
If anyone doesn't end up wanting their kit, I will buy.
If anyone doesn't end up wanting their kit, I will buy.
There are like 5 kits that haven't gone out yet so best to check the classifieds at this point. If there's enough interest I can setup a round 2.
If anyone doesn't end up wanting their kit, I will buy.
There are like 5 kits that haven't gone out yet so best to check the classifieds at this point. If there's enough interest I can setup a round 2.
There will always be a few of us that don't want one until the GB is over. I was looking at a JD40 as a project to work on w/ my son to continue his soldering lessons, but figured i'd try at a full kit before going that route.
Right, I wasn't looking to transfer order as much as just selling me their kits when they arrive.If anyone doesn't end up wanting their kit, I will buy.
There are like 5 kits that haven't gone out yet so best to check the classifieds at this point. If there's enough interest I can setup a round 2.
There will always be a few of us that don't want one until the GB is over. I was looking at a JD40 as a project to work on w/ my son to continue his soldering lessons, but figured i'd try at a full kit before going that route.
Understandable, you're not the first to ask anyway. But the timing makes it so that they can't really transfer their orders anymore so much as just do a straight sale.
GL1TCH3D, did you end up sending these packages tracked? It shows on my invoice that I payed $20 for a tracked shipping option. Can you PM me the tracking number?
Has anyone else in the US received their kit?
So I got mine all assembled and everything is looking great, but flashing it is being a real pain in the ass. I've followed all the instructions, and when I go to flash it I constantly get the "did you forget to press the reset button" message. I followed all the instructions in the main post, but still nothing different. Is there something on my end I'm doing wrong that would cause this? I've tried everything a quick google search brought it (hold it down for over a minute, press it during, press it before, etc) but nothing has worked.
So I got mine all assembled and everything is looking great, but flashing it is being a real pain in the ass. I've followed all the instructions, and when I go to flash it I constantly get the "did you forget to press the reset button" message. I followed all the instructions in the main post, but still nothing different. Is there something on my end I'm doing wrong that would cause this? I've tried everything a quick google search brought it (hold it down for over a minute, press it during, press it before, etc) but nothing has worked.
You probably don't have the driver.
When you go to the "TOOL" folder and open "ZADIG_2.2" make sure your device is in boot mode (by pressing button first). Then under "options" click "List all devices" and select "ATm32UDFU" then you will be able to "INSTALL DRIVER"
You are probably installing the "WCID DRIVER" right now if you are following the instructions step by step, which won't quite get you there. Hope this helps :thumb:
You were reading just fine haha, small little detail not in the instructions ;)So I got mine all assembled and everything is looking great, but flashing it is being a real pain in the ass. I've followed all the instructions, and when I go to flash it I constantly get the "did you forget to press the reset button" message. I followed all the instructions in the main post, but still nothing different. Is there something on my end I'm doing wrong that would cause this? I've tried everything a quick google search brought it (hold it down for over a minute, press it during, press it before, etc) but nothing has worked.
You probably don't have the driver.
When you go to the "TOOL" folder and open "ZADIG_2.2" make sure your device is in boot mode (by pressing button first). Then under "options" click "List all devices" and select "ATm32UDFU" then you will be able to "INSTALL DRIVER"
You are probably installing the "WCID DRIVER" right now if you are following the instructions step by step, which won't quite get you there. Hope this helps :thumb:
I guess today is not my day for reading well
Thanks, that did the trick :thumb:
You were reading just fine haha, small little detail not in the instructions ;)So I got mine all assembled and everything is looking great, but flashing it is being a real pain in the ass. I've followed all the instructions, and when I go to flash it I constantly get the "did you forget to press the reset button" message. I followed all the instructions in the main post, but still nothing different. Is there something on my end I'm doing wrong that would cause this? I've tried everything a quick google search brought it (hold it down for over a minute, press it during, press it before, etc) but nothing has worked.
You probably don't have the driver.
When you go to the "TOOL" folder and open "ZADIG_2.2" make sure your device is in boot mode (by pressing button first). Then under "options" click "List all devices" and select "ATm32UDFU" then you will be able to "INSTALL DRIVER"
You are probably installing the "WCID DRIVER" right now if you are following the instructions step by step, which won't quite get you there. Hope this helps :thumb:
I guess today is not my day for reading well
Thanks, that did the trick :thumb:
My matrix is being wacky, whole left side isn't working after flashing it, instead it starts the layout I have programmed, just a few keys to the right something to hash out tomorrow haha.
Sent from my Nexus 6P using Tapatalk
You were reading just fine haha, small little detail not in the instructions ;)So I got mine all assembled and everything is looking great, but flashing it is being a real pain in the ass. I've followed all the instructions, and when I go to flash it I constantly get the "did you forget to press the reset button" message. I followed all the instructions in the main post, but still nothing different. Is there something on my end I'm doing wrong that would cause this? I've tried everything a quick google search brought it (hold it down for over a minute, press it during, press it before, etc) but nothing has worked.
You probably don't have the driver.
When you go to the "TOOL" folder and open "ZADIG_2.2" make sure your device is in boot mode (by pressing button first). Then under "options" click "List all devices" and select "ATm32UDFU" then you will be able to "INSTALL DRIVER"
You are probably installing the "WCID DRIVER" right now if you are following the instructions step by step, which won't quite get you there. Hope this helps :thumb:
I guess today is not my day for reading well
Thanks, that did the trick :thumb:
My matrix is being wacky, whole left side isn't working after flashing it, instead it starts the layout I have programmed, just a few keys to the right something to hash out tomorrow haha.
Sent from my Nexus 6P using Tapatalk
You were reading just fine haha, small little detail not in the instructions ;)So I got mine all assembled and everything is looking great, but flashing it is being a real pain in the ass. I've followed all the instructions, and when I go to flash it I constantly get the "did you forget to press the reset button" message. I followed all the instructions in the main post, but still nothing different. Is there something on my end I'm doing wrong that would cause this? I've tried everything a quick google search brought it (hold it down for over a minute, press it during, press it before, etc) but nothing has worked.
You probably don't have the driver.
When you go to the "TOOL" folder and open "ZADIG_2.2" make sure your device is in boot mode (by pressing button first). Then under "options" click "List all devices" and select "ATm32UDFU" then you will be able to "INSTALL DRIVER"
You are probably installing the "WCID DRIVER" right now if you are following the instructions step by step, which won't quite get you there. Hope this helps :thumb:
I guess today is not my day for reading well
Thanks, that did the trick :thumb:
My matrix is being wacky, whole left side isn't working after flashing it, instead it starts the layout I have programmed, just a few keys to the right something to hash out tomorrow haha.
Sent from my Nexus 6P using Tapatalk
I had the same problem with mine. When you paste the new matrix, it doesn't automatically change the rows/columns above, so you have to go in an change it to 4x12. (1-4 for rows, 5-16 for columns)
At least that was what the fix was for mine
Got mine all together. The firmware was a bit of pain but once I followed what livingspeedbump and alexjd99's suggestions I got it working no problem. I tossed on some Round 5 leftovers for now but I may have to see if I can pick up a danger zone set to go with the silver and blue. All in all a very smooth group buy and a great little board, thanks GL1TCH3D.
Warning ****ty Cellphone pics incomingShow Image(http://imgur.com/CiQqZ4Q.jpg)Show Image(http://imgur.com/wISS9gP.jpg)Show Image(http://imgur.com/xlPn5bz.jpg)
Looks like I'll have to go and amend the guides
How many people built and flashed their boards so far?
Looks like I'll have to go and amend the guides
How many people built and flashed their boards so far?
Show Image(http://i.imgur.com/fAvAfJX.jpg)Show Image(http://i.imgur.com/jP7t6Bv.jpg)
Just got mine in the mail, and I must say I love the colors!
This will be my first soldering attempt in my lifetime, so wish me luck :eek: (probably practice before i even attempt to build this :x )
thanks GL1TCH3D! Look forward to this
Arghh, I want my kit. All the builds so far look super cool :thumb:
Probably will sell it pretty quickly tho since 40% (planck) just isn't my thing and I think that I won't be able to get used to the reduced amount of keys. Still should be a dope project.
Arghh, I want my kit. All the builds so far look super cool :thumb:
Probably will sell it pretty quickly tho since 40% (planck) just isn't my thing and I think that I won't be able to get used to the reduced amount of keys. Still should be a dope project.
I also paid for tracking, and have received neither the items nor tracking info. Shipping was to PA so one would imagine I would get it at the same time as the Delaware folks.
Hopefully tracking or the package itself shows up today.
I also paid for tracking, and have received neither the items nor tracking info. Shipping was to PA so one would imagine I would get it at the same time as the Delaware folks.
Hopefully tracking or the package itself shows up today.
HHKB layout with lubed ergo clears and leftovers from GraniteShow Image(http://i.imgur.com/FFLlqiw.jpg)Show Image(http://i.imgur.com/OpC4wjt.jpg)
Layout (Just in case you can't tell by the colors, Fn1 refers to the middle legends, and Fn2 refers to the bottom legends)Show Image(http://i.imgur.com/DZ5jDN3.png)
Thanks for the awesome gb Gl1tch!
I also paid for tracking, and have received neither the items nor tracking info. Shipping was to PA so one would imagine I would get it at the same time as the Delaware folks.
Hopefully tracking or the package itself shows up today.
Do you go under a different username on reddit?
Parcels were batched mainly because of mixups in what orders arrived with what part to make sure people receive the right order. I apologise if your unit is taking longer to arrive because of my methods for shipping out and checking, it is my first group buy and have learned a lot (especially about what I need to fix for next time)!
Hi, I just wanted to check that there are other East coast US people who haven't received their Golbats. I am in no rush to get it!, just noticed that some people had already gotten them and wanted to make sure I'm not the only one. Thanks!
["1,1","1,2","1,3","1,4","1,5","1,6","1,7","1,8","1,9","1,10","1,11","1,12"],
[{w:1.25},"2,1","2,2","2,3","2,4","2,5","2,6","2,7","2,8","2,9","2,10",{w:1.75},"2,12"],
[{w:1.75},"3,1","3,3","3,4","3,5","3,6","3,7","3,8","3,9","3,10",{w:1.25},"3,11","3,12"],
[{w:1.25},"4,1","4,2",{w:1.25},"4,3",{w:2.25},"4,5",{w:2.75},"4,7",{w:1.25},"4,10","4,11",{w:1.25},"4,12"]
["esc","q","w","e","r","t","y","u","i","o","p","backspace"],
[{w:1.25},"fn1","a","s","d","f","g","h","j","k","l",{w:1.75},"fn1"],
[{w:1.75},"lshift","z","x","c","v","b","n","m",">\n.",{w:1.25},"<\n,","rshift"],
[{w:1.25},"lctrl","lgui",{w:1.25},"fn2",{w:2.25},"return",{w:2.75},"space",{w:1.25},"fn2","menu",{w:1.25},"rctrl"]
["tab","!\n1","@\n2","#\n3","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",")\n0","backspace"],
[{w:1.25},"fn1","pgup","home","no","no","no",":\n;","_\n-","+\n=","\"\n'",{w:1.75},"fn1"],
[{w:1.75},"lshift","pgdn","end","no","no","no","no","no","no",{w:1.25},"up","rshift"],
[{w:1.25},"lctrl","lalt",{w:1.25},"del",{w:2.25},"return",{w:2.75},"space",{w:1.25},"left","down",{w:1.25},"right"]
["~\n`","!\n1","@\n2","#\n3","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",")\n0","backspace"],
[{w:1.25},"find","copy","paste","no","no","no","no","no","no","fn6",{w:1.75},"fn3"],
[{w:1.75},"no","f1","f2","f3","f4","f5","f6","f7","f8",{w:1.25},"f9","f10"],
[{w:1.25},"ctrl","alt",{w:1.25},"fn2",{w:2.25},"return",{w:2.75},"space",{w:1.25},"fn2","fn4",{w:1.25},"fn5"]
Wonder when mine will be arriving, seeing all these boards popping up everyday makes me impatient :p
A bit of advice: plate does not allow switch top removal entails plate does not allow switch top insertion.
Cheers,
the guy who has to desolder all switches.
luckily i didn't solder the leds...
Show Image(http://uploads.tapatalk-cdn.com/20160704/7d2a07c3861ccf01c3b18b908055768b.jpg)
Need a proper sized enter :\
Also have to unwarp the right spacebar.
Oh and hoping some white smd LEDs would reflect the gold flake acrylic, need some of those to test out.Show Image(http://uploads.tapatalk-cdn.com/20160704/d0501985f326e3358420b93fc983f8aa.jpg)
Blacks lubed and stickered. Didn't have enough custom springs to replace stock so said screw it.
Show Image(http://uploads.tapatalk-cdn.com/20160704/7d2a07c3861ccf01c3b18b908055768b.jpg)
Need a proper sized enter :\
Also have to unwarp the right spacebar.
Oh and hoping some white smd LEDs would reflect the gold flake acrylic, need some of those to test out.Show Image(http://uploads.tapatalk-cdn.com/20160704/d0501985f326e3358420b93fc983f8aa.jpg)
Blacks lubed and stickered. Didn't have enough custom springs to replace stock so said screw it.
It looks like you got the opposite of mine...Green plate with gold middle. I got gold plate with green middle.
http://imgur.com/sgMXDF0.jpg
It looks very nice. Love the Elvish keys too.
Show Image(http://uploads.tapatalk-cdn.com/20160704/7d2a07c3861ccf01c3b18b908055768b.jpg)
Need a proper sized enter :\
Also have to unwarp the right spacebar.
Oh and hoping some white smd LEDs would reflect the gold flake acrylic, need some of those to test out.Show Image(http://uploads.tapatalk-cdn.com/20160704/d0501985f326e3358420b93fc983f8aa.jpg)
Blacks lubed and stickered. Didn't have enough custom springs to replace stock so said screw it.
It looks like you got the opposite of mine...Green plate with gold middle. I got gold plate with green middle.
http://imgur.com/sgMXDF0.jpg
It looks very nice. Love the Elvish keys too.
Hehe thanks! I'm digging your colors as well! What caps do you have planned for it?
C:\tmk_keyboard-master\keyboard\tv44>make KEYMAP=tv44_sithlord dfu
dfu-programmer atmega32u4 erase --force
dfu-programmer: no device present.
../../tmk_core/rules.mk:424: recipe for target 'dfu' failed
make: *** [dfu] Error 3
Got my Golbat today :D
Unfortunately it rattled inside the box so I was already expecting some damage and what turned out was that two screws of the case came loos and went to scratch the case for a bit. which sucks but it isn't deal breaking. Although it could have been prevented with just a bit more packing material. Other than that the bottom plate has a cut mark on one of the sides which looks a bit off when examining closely which was a factory issue since the anodizing went right over it but other than that I am really liking the kit in weight and color :D
So for next time more packaging material wouldn't hurt or double check the screws. Other than that pretty smooth GB for me will probably join another GB of you if it is something I like :3
Pics: http://imgur.com/a/YcPaG
Yeah, I had some scratching as well. Just one screw came loose for me. Fortunately, all the scratching was confined to the bottom plate - so I'm not too concerned, I don't look at the bottom anyway.
["esc","Q","W","E","R","T","Y","U","I","O","P","bs"],
[{w:1.25},"tab","A","S","D","F","G","H","J","K","L",{w:1.75},"enter"],
[{w:1.75},"lshift","Z","X","C","V","B","N","M","<\n,",{w:1.25},"rshift","fn1"],
[{w:1.25},"lctrl","lgui",{w:1.25},"lalt",{w:2.25},"space",{w:2.75},"space",{w:1.25},">\n.","?\n/",{w:1.25},"fn2"]
["f1","f2","f3","f4","f5","f6","f7","f8","f9","f10","f11","f12"],
[{w:1.25},"caps","!\n1","@\n2","#\n3","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",{w:1.75},")\n0"],
[{w:1.75},"up","~\n`",":\n;","\"\n'","{\n[","}\n]","|\n\\","_\n-","+\n=",{w:1.25},"rshift","fn1"],
[{w:1.25},"left","down",{w:1.25},"right",{w:2.25},"space",{w:2.75},"space",{w:1.25},"del","?\n/",{w:1.25},"fn2"]
["f1","f2","up","f4","f5","f6","f7","f8","f9","f10","f11","f12"],
[{w:1.25},"caps","left","down","right","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",{w:1.75},")\n0"],
[{w:1.75},"home","pgup",":\n;","\"\n'","{\n[","}\n]","|\n\\","_\n-","+\n=",{w:1.25},"rshift","fn1"],
[{w:1.25},"end","pgdn",{w:1.25},"right",{w:2.25},"space",{w:2.75},"space",{w:1.25},"del","?\n/",{w:1.25},"fn2"]
Hi guys.
Today was keyboard building day for me (I had two to build). The Golbat went together without any real problems.
Now I'm trying to flash it, but I'm having a few issues and wanted to see if someone could give me a hand.
My issue is that I was able to make my file and flash it. But everything is shifted to the side.
Let me see if I can explain: On the shift row starting from the left none of the keys work until you get to "C" and that gives you a "left shift", "V" gives me nothing, "B" is "Z", and so on.
It seems like I'm having about the same shift in keys with all rows.
Layer 0Code: [Select]["esc","Q","W","E","R","T","Y","U","I","O","P","bs"],
[{w:1.25},"tab","A","S","D","F","G","H","J","K","L",{w:1.75},"enter"],
[{w:1.75},"lshift","Z","X","C","V","B","N","M","<\n,",{w:1.25},"rshift","fn1"],
[{w:1.25},"lctrl","lgui",{w:1.25},"lalt",{w:2.25},"space",{w:2.75},"space",{w:1.25},">\n.","?\n/",{w:1.25},"fn2"]
Layer 1Code: [Select]["f1","f2","f3","f4","f5","f6","f7","f8","f9","f10","f11","f12"],
[{w:1.25},"caps","!\n1","@\n2","#\n3","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",{w:1.75},")\n0"],
[{w:1.75},"up","~\n`",":\n;","\"\n'","{\n[","}\n]","|\n\\","_\n-","+\n=",{w:1.25},"rshift","fn1"],
[{w:1.25},"left","down",{w:1.25},"right",{w:2.25},"space",{w:2.75},"space",{w:1.25},"del","?\n/",{w:1.25},"fn2"]
Layer 2Code: [Select]["f1","f2","up","f4","f5","f6","f7","f8","f9","f10","f11","f12"],
[{w:1.25},"caps","left","down","right","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",{w:1.75},")\n0"],
[{w:1.75},"home","pgup",":\n;","\"\n'","{\n[","}\n]","|\n\\","_\n-","+\n=",{w:1.25},"rshift","fn1"],
[{w:1.25},"end","pgdn",{w:1.25},"right",{w:2.25},"space",{w:2.75},"space",{w:1.25},"del","?\n/",{w:1.25},"fn2"]
Let me know if I need to post more information to help me
Thanks
MoreHi guys.
Today was keyboard building day for me (I had two to build). The Golbat went together without any real problems.
Now I'm trying to flash it, but I'm having a few issues and wanted to see if someone could give me a hand.
My issue is that I was able to make my file and flash it. But everything is shifted to the side.
Let me see if I can explain: On the shift row starting from the left none of the keys work until you get to "C" and that gives you a "left shift", "V" gives me nothing, "B" is "Z", and so on.
It seems like I'm having about the same shift in keys with all rows.
Layer 0Code: [Select]["esc","Q","W","E","R","T","Y","U","I","O","P","bs"],
[{w:1.25},"tab","A","S","D","F","G","H","J","K","L",{w:1.75},"enter"],
[{w:1.75},"lshift","Z","X","C","V","B","N","M","<\n,",{w:1.25},"rshift","fn1"],
[{w:1.25},"lctrl","lgui",{w:1.25},"lalt",{w:2.25},"space",{w:2.75},"space",{w:1.25},">\n.","?\n/",{w:1.25},"fn2"]
Layer 1Code: [Select]["f1","f2","f3","f4","f5","f6","f7","f8","f9","f10","f11","f12"],
[{w:1.25},"caps","!\n1","@\n2","#\n3","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",{w:1.75},")\n0"],
[{w:1.75},"up","~\n`",":\n;","\"\n'","{\n[","}\n]","|\n\\","_\n-","+\n=",{w:1.25},"rshift","fn1"],
[{w:1.25},"left","down",{w:1.25},"right",{w:2.25},"space",{w:2.75},"space",{w:1.25},"del","?\n/",{w:1.25},"fn2"]
Layer 2Code: [Select]["f1","f2","up","f4","f5","f6","f7","f8","f9","f10","f11","f12"],
[{w:1.25},"caps","left","down","right","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",{w:1.75},")\n0"],
[{w:1.75},"home","pgup",":\n;","\"\n'","{\n[","}\n]","|\n\\","_\n-","+\n=",{w:1.25},"rshift","fn1"],
[{w:1.25},"end","pgdn",{w:1.25},"right",{w:2.25},"space",{w:2.75},"space",{w:1.25},"del","?\n/",{w:1.25},"fn2"]
Let me know if I need to post more information to help me
Thanks
When you are using the key mapping generator click on the config button next to the drop down menu where you picked Kimera and change the rows to 1-4 and the columns to 5-16 and then it should work fine.
MoreHi guys.
Today was keyboard building day for me (I had two to build). The Golbat went together without any real problems.
Now I'm trying to flash it, but I'm having a few issues and wanted to see if someone could give me a hand.
My issue is that I was able to make my file and flash it. But everything is shifted to the side.
Let me see if I can explain: On the shift row starting from the left none of the keys work until you get to "C" and that gives you a "left shift", "V" gives me nothing, "B" is "Z", and so on.
It seems like I'm having about the same shift in keys with all rows.
Layer 0Code: [Select]["esc","Q","W","E","R","T","Y","U","I","O","P","bs"],
[{w:1.25},"tab","A","S","D","F","G","H","J","K","L",{w:1.75},"enter"],
[{w:1.75},"lshift","Z","X","C","V","B","N","M","<\n,",{w:1.25},"rshift","fn1"],
[{w:1.25},"lctrl","lgui",{w:1.25},"lalt",{w:2.25},"space",{w:2.75},"space",{w:1.25},">\n.","?\n/",{w:1.25},"fn2"]
Layer 1Code: [Select]["f1","f2","f3","f4","f5","f6","f7","f8","f9","f10","f11","f12"],
[{w:1.25},"caps","!\n1","@\n2","#\n3","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",{w:1.75},")\n0"],
[{w:1.75},"up","~\n`",":\n;","\"\n'","{\n[","}\n]","|\n\\","_\n-","+\n=",{w:1.25},"rshift","fn1"],
[{w:1.25},"left","down",{w:1.25},"right",{w:2.25},"space",{w:2.75},"space",{w:1.25},"del","?\n/",{w:1.25},"fn2"]
Layer 2Code: [Select]["f1","f2","up","f4","f5","f6","f7","f8","f9","f10","f11","f12"],
[{w:1.25},"caps","left","down","right","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",{w:1.75},")\n0"],
[{w:1.75},"home","pgup",":\n;","\"\n'","{\n[","}\n]","|\n\\","_\n-","+\n=",{w:1.25},"rshift","fn1"],
[{w:1.25},"end","pgdn",{w:1.25},"right",{w:2.25},"space",{w:2.75},"space",{w:1.25},"del","?\n/",{w:1.25},"fn2"]
Let me know if I need to post more information to help me
Thanks
When you are using the key mapping generator click on the config button next to the drop down menu where you picked Kimera and change the rows to 1-4 and the columns to 5-16 and then it should work fine.
Wow that was a fast reply, thanks for the help!
I feel really dumb once I saw what you told me to do :-[
Typed on my newly flashed Golbat 40%
http://imgur.com/a/vF6ca
Posted my golbat pics
http://imgur.com/a/vF6ca
Posted my golbat pics
Still have not gotten mine. Anyone else still waiting?
Sent from my SM-G935V using Tapatalk
http://imgur.com/a/vF6ca
Posted my golbat pics
Great job Gl1tch3D, I love your Joker Golbat. Nice work, sir! BTW, did you install any LEDs?
Still have not gotten mine. Anyone else still waiting?Yours was in a later batch so hopefully should get there this week. If you don't get anything in the next few days PM me and I'll send you the tracking and can investigate with Canada post if it's stuck.
Sent from my SM-G935V using Tapatalk
Still have not gotten mine. Anyone else still waiting?
Sent from my SM-G935V using Tapatalk
Yep :'(
SkiBat!Show Image(http://i.imgur.com/vZho300.jpg)Show Image(http://i.imgur.com/kYOOPJS.jpg)
Show Image(http://uploads.tapatalk-cdn.com/20160704/7d2a07c3861ccf01c3b18b908055768b.jpg)
Need a proper sized enter :\
Also have to unwarp the right spacebar.
Oh and hoping some white smd LEDs would reflect the gold flake acrylic, need some of those to test out.Show Image(http://uploads.tapatalk-cdn.com/20160704/d0501985f326e3358420b93fc983f8aa.jpg)
Blacks lubed and stickered. Didn't have enough custom springs to replace stock so said screw it.
Show Image(http://i.imgur.com/qkGVYJe.jpg)Show Image(http://i.imgur.com/RQvIWKh.jpg)
Just started my build since I had to wait on a couple of switches and My acrylic isn't pink like it was orderd. Also the USB was crooked but I fixed that with some force.
Would like to know how we can get this fixed since it has switches soldered in already.
Pic of USB:Show Image(http://i.imgur.com/j6ARoWy.jpg)
Show Image(http://i.imgur.com/qkGVYJe.jpg)Show Image(http://i.imgur.com/RQvIWKh.jpg)
Just started my build since I had to wait on a couple of switches and My acrylic isn't pink like it was orderd. Also the USB was crooked but I fixed that with some force.
Would like to know how we can get this fixed since it has switches soldered in already.
Pic of USB:Show Image(http://i.imgur.com/j6ARoWy.jpg)
It looks neon pink when held up to the light but when sandwiched it looks orange to me. Does it not look pink at all to you?
Show Image(http://i.imgur.com/qkGVYJe.jpg)Show Image(http://i.imgur.com/RQvIWKh.jpg)
Just started my build since I had to wait on a couple of switches and My acrylic isn't pink like it was orderd. Also the USB was crooked but I fixed that with some force.
Would like to know how we can get this fixed since it has switches soldered in already.
Pic of USB:Show Image(http://i.imgur.com/j6ARoWy.jpg)
It looks neon pink when held up to the light but when sandwiched it looks orange to me. Does it not look pink at all to you?
It looks pink in direct light indeed, saw that later but still in a sandwiched case that isn't the situation so it will just keep looking orange. Which isn't something you would want.
Show Image(http://i.imgur.com/qkGVYJe.jpg)Show Image(http://i.imgur.com/RQvIWKh.jpg)
Just started my build since I had to wait on a couple of switches and My acrylic isn't pink like it was orderd. Also the USB was crooked but I fixed that with some force.
Would like to know how we can get this fixed since it has switches soldered in already.
Pic of USB:Show Image(http://i.imgur.com/j6ARoWy.jpg)
It looks neon pink when held up to the light but when sandwiched it looks orange to me. Does it not look pink at all to you?
It looks pink in direct light indeed, saw that later but still in a sandwiched case that isn't the situation so it will just keep looking orange. Which isn't something you would want.
Agreed completely! I was wondering if I was just losing it or something because I kept seeing pink in the picture where you are holding it up and it can be seen though, then I noticed it looked decidedly orange when sandwiched. Just wanted to make sure that I was seeing things properly!
Edit:
The more I think about it the more I remember having some acrylic that was neon pink like yours and I remember it being orange when looked at from the side when it wasn't lit up enough to see through it. Maybe some bright white internal LEDs would help?
Finally found the time to build mine. Tiny, but fierce!Show Image(https://i.imgur.com/PMZsd0S.jpg)
Finally found the time to build mine. Tiny, but fierce!Now that's a pretty board, do you have any more pictures?Show Image(https://i.imgur.com/PMZsd0S.jpg)
Show Image(http://uploads.tapatalk-cdn.com/20160704/7d2a07c3861ccf01c3b18b908055768b.jpg)
Need a proper sized enter :\
Also have to unwarp the right spacebar.
Oh and hoping some white smd LEDs would reflect the gold flake acrylic, need some of those to test out.Show Image(http://uploads.tapatalk-cdn.com/20160704/d0501985f326e3358420b93fc983f8aa.jpg)
Blacks lubed and stickered. Didn't have enough custom springs to replace stock so said screw it.
How is the spacebar without stabilizers?
Show Image(http://uploads.tapatalk-cdn.com/20160704/7d2a07c3861ccf01c3b18b908055768b.jpg)
Need a proper sized enter :\
Also have to unwarp the right spacebar.
Oh and hoping some white smd LEDs would reflect the gold flake acrylic, need some of those to test out.Show Image(http://uploads.tapatalk-cdn.com/20160704/d0501985f326e3358420b93fc983f8aa.jpg)
Blacks lubed and stickered. Didn't have enough custom springs to replace stock so said screw it.
How is the spacebar without stabilizers?
Turns out I could put pcb mount stabs in after soldering the board up, so it has stabs now :)
Show Image(http://i.imgur.com/qkGVYJe.jpg)Show Image(http://i.imgur.com/RQvIWKh.jpg)
Just started my build since I had to wait on a couple of switches and My acrylic isn't pink like it was orderd. Also the USB was crooked but I fixed that with some force.
Would like to know how we can get this fixed since it has switches soldered in already.
Pic of USB:Show Image(http://i.imgur.com/j6ARoWy.jpg)
It looks neon pink when held up to the light but when sandwiched it looks orange to me. Does it not look pink at all to you?
It looks pink in direct light indeed, saw that later but still in a sandwiched case that isn't the situation so it will just keep looking orange. Which isn't something you would want.
Agreed completely! I was wondering if I was just losing it or something because I kept seeing pink in the picture where you are holding it up and it can be seen though, then I noticed it looked decidedly orange when sandwiched. Just wanted to make sure that I was seeing things properly!
Edit:
The more I think about it the more I remember having some acrylic that was neon pink like yours and I remember it being orange when looked at from the side when it wasn't lit up enough to see through it. Maybe some bright white internal LEDs would help?
Ah, no you saw it all good ;)
Well I wasn't planning on using LEDS and it will need to be both at the bottom and the top of the PCB. I mean I can but some LEDs revesed in but that wouldn't be ideal I think. Rather just have it looking Pink but LEDs might be the only way to get it somewhat decently done :/
Show Image(http://uploads.tapatalk-cdn.com/20160704/7d2a07c3861ccf01c3b18b908055768b.jpg)
Need a proper sized enter :\
Also have to unwarp the right spacebar.
Oh and hoping some white smd LEDs would reflect the gold flake acrylic, need some of those to test out.Show Image(http://uploads.tapatalk-cdn.com/20160704/d0501985f326e3358420b93fc983f8aa.jpg)
Blacks lubed and stickered. Didn't have enough custom springs to replace stock so said screw it.
How is the spacebar without stabilizers?
Turns out I could put pcb mount stabs in after soldering the board up, so it has stabs now :)
So I take it that it wasn't good without them? I have some that I have already lubed but I wanted to see how it was without them.
Here are my notes for if I need to do this again in the future.
Let me know if I missed something.
Instructions can be found on this thread
https://geekhack.org/index.php?topic=78510.0
Step one: Go to http://www.enjoyclick.org/tkg/#. This is the site that will be building the main firmware for the board.
Step two: Choose the Kimera as the keyboard (not the two headed)
Step three: Click the config button and replace the text in the "matrix mapping" box with the following code http://pastebin.com/Bf2uQWHv
Step 3.1: Modify the Row mapping to be 1-4, and Column mapping to be 5-16.
Step four point one: Go to keyboard layout editor and setup your mapping http://www.keyboard-layout-editor.com/#/gists/83b7eb12b3bccdf4c55d
Step four point two: When you're making your layouts, make each layout separately AND INCLUDE BOTH LEGENDS.
For example, the "." key requires the "." and ">" in the mapping to work.
See the help section on enjoyclick for all the symbols to use http://www.enjoyclick.org/tkg/#help
Step five: Paste the layouts for each layer into the corresponding boxes on enjoyclick
Step six: Choose your fn options.
NOTE: fn covers a wide range of options including LEDs, not just changing layers.
Step seven: See the following for details on the LEDs http://pastebin.com/zSVN4f9j
Step eight: Download your firmware as a .eep file
Step nine: From the following toolkit, https://github.com/kairyu/tkg-toolkit, download the files in the windows tree.
Step ten point one: Run the batch file "setup.bat" from the toolkit.
This only has to be done the first time you're flashing your board.
Step ten point two: The options tree is as such "12Kimera core>N>1.Default>1.ateml_dfu"
Step eleven: Click the reset button on the golbat PCB (it's on the back).
Step twelve: Run "zadig_2.1.2.exe" and Install the Driver (Not WCID).
This only has to be done the first time you're flashing the golbat. (And may override drivers for other keyboards)
Step 12.1 :When you go to the "TOOL" folder and open "ZADIG_2.2" make sure your device is in boot mode (by pressing button first).
Then under "options" click "List all devices" and select "ATm32UDFU" then you will be able to "INSTALL DRIVER"
Step thirteen: Drag and drop the .eep firmware file (Icons on the folder) that you created onto the batch file "reflash.bat"
Step fourteen: ???
Step fifteen: Profit
Here are my notes for if I need to do this again in the future.
Let me know if I missed something.
Instructions can be found on this thread
https://geekhack.org/index.php?topic=78510.0
Step one: Go to http://www.enjoyclick.org/tkg/#. This is the site that will be building the main firmware for the board.
Step two: Choose the Kimera as the keyboard (not the two headed)
Step three: Click the config button and replace the text in the "matrix mapping" box with the following code http://pastebin.com/Bf2uQWHv
Step 3.1: Modify the Row mapping to be 1-4, and Column mapping to be 5-16.
Step four point one: Go to keyboard layout editor and setup your mapping http://www.keyboard-layout-editor.com/#/gists/83b7eb12b3bccdf4c55d
Step four point two: When you're making your layouts, make each layout separately AND INCLUDE BOTH LEGENDS.
For example, the "." key requires the "." and ">" in the mapping to work.
See the help section on enjoyclick for all the symbols to use http://www.enjoyclick.org/tkg/#help
Step five: Paste the layouts for each layer into the corresponding boxes on enjoyclick
Step six: Choose your fn options.
NOTE: fn covers a wide range of options including LEDs, not just changing layers.
Step seven: See the following for details on the LEDs http://pastebin.com/zSVN4f9j
Step eight: Download your firmware as a .eep file
Step nine: From the following toolkit, https://github.com/kairyu/tkg-toolkit, download the files in the windows tree.
Step ten point one: Run the batch file "setup.bat" from the toolkit.
This only has to be done the first time you're flashing your board.
Step ten point two: The options tree is as such "12Kimera core>N>1.Default>1.ateml_dfu"
Step eleven: Click the reset button on the golbat PCB (it's on the back).
Step twelve: Run "zadig_2.1.2.exe" and Install the Driver (Not WCID).
This only has to be done the first time you're flashing the golbat. (And may override drivers for other keyboards)
Step 12.1 :When you go to the "TOOL" folder and open "ZADIG_2.2" make sure your device is in boot mode (by pressing button first).
Then under "options" click "List all devices" and select "ATm32UDFU" then you will be able to "INSTALL DRIVER"
Step thirteen: Drag and drop the .eep firmware file (Icons on the folder) that you created onto the batch file "reflash.bat"
Step fourteen: ???
Step fifteen: Profit
Hey~ I just wanted to chime in here and say that your guide to the firmware was very very helpful -- I built mine last night (not w/o 1st-timer problems I ran into) and you made it a breeze to flash-- It is super appreciated :thumb:
I think its limited to 3 layers in total :'(, I would also like to have one more FN layer, would be nice if anyone could confirm this. :thumb:
Hey~ I just wanted to chime in here and say that your guide to the firmware was very very helpful -- I built mine last night (not w/o 1st-timer problems I ran into) and you made it a breeze to flash-- It is super appreciated :thumb:
I'm having trouble flashing firmware to my board it appears to have like loaded what was supposed to be on the left side of the board to the right side of the board and nothing to the left. help would be much appreciated. I used the guide that's on the OP twice and came up with the same problem.
I'm having trouble flashing firmware to my board it appears to have like loaded what was supposed to be on the left side of the board to the right side of the board and nothing to the left. help would be much appreciated. I used the guide that's on the OP twice and came up with the same problem.
Did you change the matrix columns?
Page 7 is what it is supposed to look like:
https://docs.google.com/document/d/1PKgcLqUNK5ih4HROSKHDGSnp7DRoiRm6Ttt0aHPeTos/edit
I'm having trouble flashing firmware to my board it appears to have like loaded what was supposed to be on the left side of the board to the right side of the board and nothing to the left. help would be much appreciated. I used the guide that's on the OP twice and came up with the same problem.
Did you change the matrix columns?
Page 7 is what it is supposed to look like:
https://docs.google.com/document/d/1PKgcLqUNK5ih4HROSKHDGSnp7DRoiRm6Ttt0aHPeTos/edit
No I didn't :( thanks!
Sent from my iPhone using Tapatalk
Hi guys, I wanted to make a few modifications to my layout. But every time I put any layout into http://tkg.io/# I get this "Error position mismatch" message. Was it like that the first time I used it and just don't remember, or is something not working right?
(Attachment Link)
Hi, guys. I have a bog problem now, I have a Golbat 40% HHKB style keyboard, I tried to reflash my firmware to it, but its failed and now my keyboard just die, I can't even reset to the default layout.
How to save my keyboard? HELP.
Hi guys, I wanted to make a few modifications to my layout. But every time I put any layout into http://tkg.io/# I get this "Error position mismatch" message. Was it like that the first time I used it and just don't remember, or is something not working right?
(Attachment Link)
Can you post the matrix for your layout?
Have you also changed the rows and columns on the setup page?
Is there a reason why the middle is a two piece acrylic instead of one piece? I just noticed
Yes, I followed steps that you posted, maybe my firmware have problem, now I just want to reflash my keyboard to the stock mode, but it's not working, keyboard just like die.Hi, guys. I have a bog problem now, I have a Golbat 40% HHKB style keyboard, I tried to reflash my firmware to it, but its failed and now my keyboard just die, I can't even reset to the default layout.
How to save my keyboard? HELP.
Did you go through the guild I posted a while back?
Did you have any problems while going through the steps?
Yes, I followed steps that you posted, maybe my firmware have problem, now I just want to reflash my keyboard to the stock mode, but it's not working, keyboard just like die.Hi, guys. I have a bog problem now, I have a Golbat 40% HHKB style keyboard, I tried to reflash my firmware to it, but its failed and now my keyboard just die, I can't even reset to the default layout.
How to save my keyboard? HELP.
Did you go through the guild I posted a while back?
Did you have any problems while going through the steps?
I finally built my Golbat last night, but something is foobar'ed. When I plug it into USB, the Kimera core chip gets very hot (too hot to touch), and I can smell burning plastic. I was in the process of trying to flash it with tkg toolkit, but the toolkit doesn't recognize the device either.
Any chance I'm not completely f'ed?
I'm also having some mental difficulty getting my layout onto the board, always having problems when copypasting the code into fw maker thing...
someone hold my hand please :)
I've followed guides from this thread and I just can't get my layouts to work.
I'm able to flash, but flashing doesn't match the layout??? Not sure what I'm doing wrong.
I've configured the matrix and adjusted the col/rows accordingly.
My raw layout data is the exact same from the guide.