[IC] MT3 Serika | IS LIVE! ORDERS CLOSE ON 08/30/19 11:59 PDT

[AlcoholEnthusiast]

Would also be interested in R3 Function, though not a dealbreaker by any means.

[RominRonin]

Show Image

Susuwatari had a few extra keys. Enabled support for Colemak-DH and -DHm.

Colemak-DH has pretty much became the recommended layout by us Colemak-nerds. Would be awesome if you would consider continuing supporting this layout. Thanks.

The important letters are:
R2 B
R3 M
R4 DH

Nice, will add them then.

I just read this - please ignore me!

Sent from my Moto G (5) Plus using Tapatalk

[jortzii]

100% in

Why am I not surprised?

[Oblotzky]

How about an R3 1.75U Fn or Function, probably in Extension?

Would also be interested in R3 Function, though not a dealbreaker by any means.

me3

[adxlk]

zambu, can you do a render on blue gray jane v2 please?

[Zambumon]

zambu, can you do a render on blue gray jane v2 please?

I can't.

[konstantin]

Looking good so far. I dig the typeface. Here's a few things I've noticed or would change in the kits:

• I'm a big fan of System/Sys legends; however, I think the 1.25u System key looks a bit cramped, especially since the 1.25u ctrl legend next to it is Ctrl and not Control. Consider changing the 1.25u winkey legend to Sys. The 1.5u legend in the extension kit should stay System so it matches how the Ctrl/Control and Cmd/Command legends scale.
  Another argument in favor of this is that you're using the short Ins and Del legends in the nav cluster.
• Use Scroll instead of Lock for the one-line scroll lock legend, it makes more sense.
• Similarly, consider using Caps instead of Caps↵Lock for the stepped caps lock legend. This will keep the aesthetic clean and without any two-line legends.
• nvm, I'm blind
• Add Alt Gr keys to the ISO and/or international kit.
• Looking at the above posts, I too would like to see a R3 1.75u Function cap, e.g. in the extension kit.
• I'm sure this has been mentioned before, but is there any chance of getting reverse dye-subbed accents?

[Zambumon]

1. I prefer to use the whole world if it there's enough room for it.
2. My personal preference is to use Lock for the scroll lock key.
3. Agree.
4.
5. There's no tertiary legends for the international kit. Alt Gr only makes sense in that case.
6. Will think about it.
7. No.

[konstantin]

2. My personal preference is to use Lock for the scroll lock key.

Could you elaborate a bit as to why that this? I'm interested in hearing your thoughts on it. Is it because Lock fits nicer in the key, or do you think that legend makes more sense in that context?

5. There's no tertiary legends for the international kit. Alt Gr only makes sense in that case.

Good point.

[Zambumon]

ERGODOX USERS

Vote here





Updated Cores. Removed Symmetry kits. I will not be adding R2 1U yellow pipe keys, but I'll think about the R3 1U yellow ' ".






ERGODOX USERS

Vote here

[Zambumon]

Could you elaborate a bit as to why that this? I'm interested in hearing your thoughts on it. Is it because Lock fits nicer in the key, or do you think that legend makes more sense in that context?

I like to use Lock, similar to how I like to use System for the OS key.

[Boy_314]

Show Image

Updated Cores. Removed Symmetry kits. I will not be adding R2 1U yellow pipe keys, but I'll think about the R3 1U yellow ' ".

Show Image

Show Image

i like this

[mwahlig]

One question regarding the profile for the 40s. This is intended to be used for Planck/Preonic, right? How does the bottom row R4 feel. I have one SA set with R4 bottom row and it does not feel right in same cases. My Preonic case has no angle at all. Is this not a bit uncomfortable to type on? The Ergo kit has R5 for the thumb cluster. Why not use R5 also for the Ortho/40s kits?

Yeah, I wish that the ortho kit had R5 for the bottom row like dev/tty and godspeed. R4 is gonna feel weird.

[Zambumon]

One question regarding the profile for the 40s. This is intended to be used for Planck/Preonic, right? How does the bottom row R4 feel. I have one SA set with R4 bottom row and it does not feel right in same cases. My Preonic case has no angle at all. Is this not a bit uncomfortable to type on? The Ergo kit has R5 for the thumb cluster. Why not use R5 also for the Ortho/40s kits?

Yeah, I wish that the ortho kit had R5 for the bottom row like dev/tty and godspeed. R4 is gonna feel weird.

The rest of the set all has R4. Doesn't make much sense to use a different row profile for a particular form factor.


Edit:/dev/tty had R5 because the set included both R5 and R4 bottom rows for the whole set.

[mwahlig]

Good point. Looking forward to this set regardless!

[Zambumon]

Friendship regained with Oblotzky. Extension kit updated

[kakiharaOne]

Oblotzky, remember you also need an R1 1.5u backspace in extensions too... remember

[Zambumon]

Oblotzky, remember you also need an R1 1.5u backspace in extensions too... remember

That was already in the modifiers. Backspace didn't fit on the 1.5U key, I opted to use Erase.

[kakiharaOne]

Oblotzky, remember you also need an R1 1.5u backspace in extensions too... remember

That was already in the modifiers. Backspace didn't fit on the 1.5U key, I opted to use Erase.

I’m just trying to not have to buy Ergo for one key.

[Oblotzky]

Oblotzky, remember you also need an R1 1.5u backspace in extensions too... remember

That was already in the modifiers. Backspace didn't fit on the 1.5U key, I opted to use Erase.

Think he's talking about Vortex Race support, R1 not R2

[kakiharaOne]

Oblotzky, remember you also need an R1 1.5u backspace in extensions too... remember

That was already in the modifiers. Backspace didn't fit on the 1.5U key, I opted to use Erase.

Think he's talking about Vortex Race support, R1 not R2

This would be for the original M0110 layout. But it would help my case if there were other boards with it!

[wangledorf]

Updated Cores. Removed Symmetry kits. I will not be adding R2 1U yellow pipe keys, but I'll think about the R3 1U yellow ' ".

Glad to hear you're considering the yellow ' " key! Any chance of adding the R2 1U yellow pipe key to the forties kit at least? I can understand if not as it's not the default planck/preonic layout but I'd be lying if I said I wasn't sad

[Zambumon]

Updated Cores. Removed Symmetry kits. I will not be adding R2 1U yellow pipe keys, but I'll think about the R3 1U yellow ' ".

Glad to hear you're considering the yellow ' " key! Any chance of adding the R2 1U yellow pipe key to the forties kit at least? I can understand if not as it's not the default planck/preonic layout but I'd be lying if I said I wasn't sad

Same deal as the yellow tilde. If I add them, I have to add them all, so that's four extra keys.

[Puddsy]

Updated Cores. Removed Symmetry kits. I will not be adding R2 1U yellow pipe keys, but I'll think about the R3 1U yellow ' ".

Glad to hear you're considering the yellow ' " key! Any chance of adding the R2 1U yellow pipe key to the forties kit at least? I can understand if not as it's not the default planck/preonic layout but I'd be lying if I said I wasn't sad

Same deal as the yellow tilde. If I add them, I have to add them all, so that's four extra keys.

make em another kit so that the people with bad taste have to suffer

[Zambumon]

make em another kit so that the people with bad taste have to suffer

These kind of request often happen with sets with a lot of kits, the more you offer, the more people ask for.

After some thinking about the yellow tilde and yellow R2 1U pipe keys, I am not going to add them. The current 40s kit is already at the limit of what I want it to be, adding more cosmetic keys (that is, that they do not provide any extra layout coverage) is something I'd not like to do.

[wangledorf]

These kind of request often happen with sets with a lot of kits, the more you offer, the more people ask for.

After some thinking about the yellow tilde and yellow R2 1U pipe keys, I am not going to add them. The current 40s kit is already at the limit of what I want it to be, adding more cosmetic keys (that is, that they do not provide any extra layout coverage) is something I'd not like to do.

Understandable, I'll probably end up just filling those spots with the TURBO and HYPE novelties instead.

Out of curiosity, would you ever consider a generic legend forties kit? Sorta like how GMK Oblivion uses Git commands for mods or assembly instructions for the Assembly kit?

[Techno Trousers]

I don't think this was answered, but any chance for R5 space bars added to the 6.25 kit? If everyone is going R4 only bottom rows in MT3 sets, I'll need to stock up on R5 space.

[Zambumon]

I don't think this was answered, but any chance for R5 space bars added to the 6.25 kit? If everyone is going R4 only bottom rows in MT3 sets, I'll need to stock up on R5 space.

MT3 Serika will use R4 space bars.

[digid3ar]

damn i really would like to have at least a keyboard with ñ, but a whole set for that one key  , i hate to be in that tiny segment of the market.

[Jaxxstatic]

IN for Hangul legends. Only kind of joking. Not really, I want Hangul on Serika so bad.
But yes, I'll be getting it in whatever form Zambumon goes with.

[Rob27shred]

Think I'm looking at my first MT3 set here. I also think Hangul sub legends would look killer on this set. Maybe a possibility on a future run of Serika?

[Zambumon]

IN for Hangul legends. Only kind of joking. Not really, I want Hangul on Serika so bad.
But yes, I'll be getting it in whatever form Zambumon goes with.

Not going to happen.

[Stewiedk97]

Does this mean serika deskmats are coming back?

[Zambumon]

Does this mean serika deskmats are coming back?

Novelkeys still had stock of the Serika light ones until very recently. Hexagon Dark has been out of stock for a while now, so they might re-stock them soon.

[mkarlsson]

damn i really would like to have at least a keyboard with ñ, but a whole set for that one key  , i hate to be in that tiny segment of the market.

I guess you missed the gmk jamón GB, it had plenty of them

[kissingyou]

Ready

[ladysleep]

longing for the GMK Serika！！！

[Zambumon]

longing for the GMK Serika！！！

This is the IC for MT3 Serika.

[Puddsy]

longing for the GMK Serika！！！

This is the IC for MT3 Serika.

the man can dream

[Zambumon]

longing for the GMK Serika！！！

This is the IC for MT3 Serika.

the man can dream

I will start thinking about it in 2021, you can set a reminder and ping me in 3 years about it. In the meantime: let's celebrate MT3 Serika.

[Puddsy]

longing for the GMK Serika！！！

This is the IC for MT3 Serika.

the man can dream

I will start thinking about it in 2021, you can set a reminder and ping me in 3 years about it. In the meantime: let's celebrate MT3 Serika.

!remindme 3 years

[Zambumon]

Ergodoxusers

FILL THIS FORM

I'll be closing it on Sunday.

[lolafineday]

Pleaseee add 1.75 shift that is accented black. Thanks

[Zambumon]

Pleaseee add 1.75 shift that is accented black. Thanks

No.

Why just R4 1.75U shift in dark grey? Why not all the Shifts?

[fombat]

SO MANY SETS TO BUY but very down

[nickaster1]

What is it with the ugly font may I ask? I think we can do better than sticking with this basic font.

[Zambumon]

What is it with the ugly font may I ask? I think we can do better than sticking with this basic font.

I knew it. I should have used comic sans instead.

[nickaster1]

What is it with the ugly font may I ask? I think we can do better than sticking with this basic font.

I knew it. I should have used comic sans instead.

Dang it man. You read my mind right there

[lendflat]

Does it not make sense to for the spacebar kit to offer yellow and grey spacebars instead of cream and grey since cream is already part of the modifiers kit?

[laserbeamspewpew]

Does it not make sense to for the spacebar kit to offer yellow and grey spacebars instead of cream and grey since cream is already part of the modifiers kit?

No.