[GB] ZZ96 v2 r2 (replacements in progress)

[Krytone]

filled out form this morning and paid this afternoon. Now hyped that i got into this!

[LunarisDream]

filled out form this morning and paid this afternoon. Now hyped that i got into this!

Confirmed. Goddamn, you paid in 3 minutes.

[Krytone]

filled out form this morning and paid this afternoon. Now hyped that i got into this!

Confirmed. Goddamn, you paid in 3 minutes.

i really mean it that i want this. you made my day good sir!

[depreshun]

Invoice paid. Is there anyway to confirm that I got Black Plate/Black Case? Just want to make sure I didn't mess up the form, I'm sorta bad at that sometimes. 

[LunarisDream]

Invoice paid. Is there anyway to confirm that I got Black Plate/Black Case? Just want to make sure I didn't mess up the form, I'm sorta bad at that sometimes. 

If you're risingremains, then yes. You can also check/change your selections as long as the form is open by opening the link from the computer you filled out the form at.

[depreshun]

Invoice paid. Is there anyway to confirm that I got Black Plate/Black Case? Just want to make sure I didn't mess up the form, I'm sorta bad at that sometimes. 

If you're risingremains, then yes. You can also check/change your selections as long as the form is open by opening the link from the computer you filled out the form at.

Sweet. Beyond stoked about this board!

[misterhamez]

am i still able to join this group buy?

[LunarisDream]

am i still able to join this group buy?

's long as the form's up.

[misterhamez]

am i still able to join this group buy?

's long as the form's up.

oh boy am i excited. just double checking, shipping to Australia is fine?

[LunarisDream]

am i still able to join this group buy?

's long as the form's up.

oh boy am i excited. just double checking, shipping to Australia is fine?

Ya

[mathilda]

Paid

[MediocreBadGuy23]

Any pics out there of what the acrylic kit night look like?

[LunarisDream]

Any pics out there of what the acrylic kit night look like?

Not yet.

[Asbrodeus]

filled out that form so hard.

[kikilink333]

Can I still make this?  Filling out the form now.  Been searching for weeks to find this layout.  I've been reading about groupbuys but not 100% sure on how this all plays out?

[duynguyenle]

Can I still make this?  Filling out the form now.  Been searching for weeks to find this layout.  I've been reading about groupbuys but not 100% sure on how this all plays out?

Obligatory: https://geekhack.org/index.php?topic=77272.0

[aaron6301]

Invoice paid for GB 2.5, thanks LD for opening this back up!

When is the deadline for changing color options on our orders? Still on the fence about what I chose 

[LunarisDream]

Invoice paid for GB 2.5, thanks LD for opening this back up!

When is the deadline for changing color options on our orders? Still on the fence about what I chose 

Until a little bit after I have to submit the orders to the factory, but please come to a decision as soon as you can. (:

[kikilink333]

Invoice paid. Yippie!

[Pieminister]

Hey guys, for those of you who have already assembled a ZZ96 i had a question about some technical details. Where did you find information regarding programming the board such as key assignments, LED functions for both the built in LEDs and additional in-switch LEDs if installed. Another noob question, what is the voltage on the in-switch LED pins? I have bought i've got some nice LEDs, but I am wondering whether i need to worry about resistors?

I am excited and have everything prepared. Got my Zealios lubed and sip socketed and got all my LEDs filed down to comfortably fit. That alone was already several days work!

[redbanshee]

Hey guys, for those of you who have already assembled a ZZ96 i had a question about some technical details. Where did you find information regarding programming the board such as key assignments, LED functions for both the built in LEDs and additional in-switch LEDs if installed. Another noob question, what is the voltage on the in-switch LED pins? I have bought i've got some nice LEDs, but I am wondering whether i need to worry about resistors?

I am excited and have everything prepared. Got my Zealios lubed and sip socketed and got all my LEDs filed down to comfortably fit. That alone was already several days work!

It uses Bootmapper client: http://blog.winkeyless.kr/155

I dont know the exact voltage of the in switch LEDS but there are already pre-soldered resistors in place from the factory

[airs]

Pictures from my build: https://imgur.com/a/Kzfoj

[kikilink333]

Looking back through the thread the Titanium Grey had some color differences than the pictures.  Will it be a dark grey as pictured?  Thanks!

[jb1830]

Invoice paid. Pumped.

[owacle]

Also filled out the form as fast as my little fingers could type on this sub-standard board!

I really hope I haven't missed it AGAIN. Two attempts to buy from other members fell through already! ARGH.

[kawasaki161]

Those boards really turned out very nice. Do any of these (read: boards with 96key layout without keyspacing) exist with split spacebar support?

[LunarisDream]

Looking back through the thread the Titanium Grey had some color differences than the pictures.  Will it be a dark grey as pictured?  Thanks!

Yes, that was my own error. The picture is accurate, and it won't happen again.

[kikilink333]

Awesome thanks!  Trying to plan keycaps. 

[owacle]

Paid! Yay!

Did you already give an estimate for the manufacture and shipping? Very exciting!!

[bleeps]

Paid! (bleepsndrums from reddit)

Thanks for the sale!

[BAS1C]

Section for updates:

8/30/2016

Getting some international orders out the door today. :^)

Yeeeees

[Reckless5040]

I take it this means i cant get in on it

[stillzman]

can't believe i missed this, i love this layout

[depreshun]

Oh I forgot to ask, does the kit come with stabilzers?

Edit: I forgot to add, just the normal cherry stabs. I want to know just so I don't buy extra I don't need. 

[MandrewDavis]

Oh I forgot to ask, does the kit come with stabilzers?

In regards to stabilizers, will screw mount stabilizers be an option for R2.5 without significant delays?

[rondg]

For those outside the US, have you received your tracking yet? Is there tracking for orders outside the US?

I am really excited for this.

[BAS1C]

For those outside the US, have you received your tracking yet? Is there tracking for orders outside the US?

I am really excited for this.

Not myself or my other Canadian friend. Super unsure but I think it might be going through DHL? Would be faster than China post for sure. Let me know when you get yours!

[rondg]

For those outside the US, have you received your tracking yet? Is there tracking for orders outside the US?

I am really excited for this.

Not myself or my other Canadian friend. Super unsure but I think it might be going through DHL? Would be faster than China post for sure. Let me know when you get yours!

He did mention that it will be going through DHL. I'll post here for any update

[LunarisDream]

All international orders will go out via DHL.

[LunarisDream]

Oh I forgot to ask, does the kit come with stabilzers?

In regards to stabilizers, will screw mount stabilizers be an option for R2.5 without significant delays?

Screw-mount is undergoing seriously delays. I will probably have to swap to regular gold-plated PCB-mount or refund - trying to get it sorted out. I already paid for them, and if they finish before R2.5 is done, I'll make them available as an add-on.

I don't want to make stabs an option for r2.5 because it added a significant amount of time to sorting and packing, and I'm running a one-man operation over here. However, if they're prohibitively expensive to acquire for you, PM me. 1x 6.25/7u wire + 5x 2u (standard layout w/ arrow keys) will cost $9.

[MandrewDavis]

Oh I forgot to ask, does the kit come with stabilzers?

In regards to stabilizers, will screw mount stabilizers be an option for R2.5 without significant delays?

Screw-mount is undergoing seriously delays. I will probably have to swap to regular gold-plated PCB-mount or refund - trying to get it sorted out. I already paid for them, and if they finish before R2.5 is done, I'll make them available as an add-on.

I don't want to make stabs an option for r2.5 because it added a significant amount of time to sorting and packing, and I'm running a one-man operation over here. However, if they're prohibitively expensive to acquire for you, PM me. 1x 6.25/7u wire + 5x 2u (standard layout w/ arrow keys) will cost $9.

Just curious, I have plenty of normal PCB-mount clip in stabs that will do fine.

[Mr_BeastQuake]

My brain works slow but was it possible to add an extra PCB to round 2.5 order? I only just now thought of this.

[LunarisDream]

My brain works slow but was it possible to add an extra PCB to round 2.5 order? I only just now thought of this.

PM me about it. May take a lil time to respond though.

[Pieminister]

How are you getting on with shipping the international orders. I am buzzing!

[slwb]

http://imgur.com/a/ykoF7

A bit late to the build party, but just finished mine up!  Sadly I didn't have the ZZ96 in mind for the Pulse set when I ordered, so no TSA Fox kit.  I'm making due with the 2u Function even though it is the wrong profile.  And my Up is even more so wrong, but still loving it.  The double 1.25u where I need 1.5u is absolutely killing me though.  Not looking forward to trolling forums for grab bag rejects to fill that void...

Still absolutely loving the board.  Glad it was my second custom build or I would've been struggling.  Now to get to work banging out a new firmware for it.  Need my keymappings back and a new backlight color.

Question for others who have built already:  did you have trouble getting all 10 PCB screws in place?  I could only get 7 of them in at the end, Plenty to keep it steady, but mildly annoying.  Also, any advice on attaching the side diffusers?  I saw mention of double sided tape somewhere, but that seems like a poor solution.

[breitling]

Looking good! Can't wait for mine to ship..!!

[BAS1C]

Any update on the shipments from China LD?

[Mr_BeastQuake]

http://imgur.com/a/ykoF7

A bit late to the build party, but just finished mine up!  Sadly I didn't have the ZZ96 in mind for the Pulse set when I ordered, so no TSA Fox kit.  I'm making due with the 2u Function even though it is the wrong profile.  And my Up is even more so wrong, but still loving it.  The double 1.25u where I need 1.5u is absolutely killing me though.  Not looking forward to trolling forums for grab bag rejects to fill that void...

Still absolutely loving the board.  Glad it was my second custom build or I would've been struggling.  Now to get to work banging out a new firmware for it.  Need my keymappings back and a new backlight color.

Question for others who have built already:  did you have trouble getting all 10 PCB screws in place?  I could only get 7 of them in at the end, Plenty to keep it steady, but mildly annoying.  Also, any advice on attaching the side diffusers?  I saw mention of double sided tape somewhere, but that seems like a poor solution.

I had trouble getting all the screws in with a switchless PCB. Odd that the RS96 PCB I have in place until Zeal's GB comes through allows for all holes to be accessed. Also, my side diffusers are attached using double sided tape, it works pretty well as long as you dont grab it by the diffuser. I didn't check to see how it affects the shine through the diffuser though.

[yookwh]

Gah kicking myself for not getting into the 2.5 drop. Any idea when the next one will be?

[MandrewDavis]

Gah kicking myself for not getting into the 2.5 drop. Any idea when the next one will be?

LD has said he will be selling kits with a full acrylic case in the future.