Alright, I think I'm missing something or I did something wrong. I've got a Dell AT101W PS/2 board that I'm wiring up a Teensy 2.0 with the default TMK PS2-USB Converter Rev.1 firmware.
I've got Vcc connected to +5v, GND connected to ground, PD0 connected to Data, and PD1 connected to Clock.
When I connect the USB connector to it, all the LEDs light up for like half a second and then they all go off. After that the teensy shows in device manager as a keyboard, but nothing on the keyboard works.
Do I have the lines backwards or am I using the wrong firmware or something? I tried putting a 4.7k resistor on the data and clock lines connecting to Vcc but still nothing.
Any ideas would be greatly appreciated.