This is exactly like the one, but I am a poor fuccboi so you have my interest as long as the design different and it is reasonableWell, that was something I have done for fun :eek:
Okay! You have my full interest then!This is exactly like the one, but I am a poor fuccboi so you have my interest as long as the design different and it is reasonableWell, that was something I have done for fun :eek:
If you are into custom long enough, you will notice it is just not like the one (but more)
Thank you sir.Okay! You have my full interest then!This is exactly like the one, but I am a poor fuccboi so you have my interest as long as the design different and it is reasonableWell, that was something I have done for fun :eek:
If you are into custom long enough, you will notice it is just not like the one (but more)
Are they made in Malaysia?Hi bro, are you from Malaysia?
How much does it cost to prototype these things in Malaysia?
Are they made in Malaysia?Hi bro, are you from Malaysia?
How much does it cost to prototype these things in Malaysia?
If i could afford it I would be all over this, but winkeys are YOUR FRIENDI assume there would be a winkey option
Wow!!! This is in the IC right now? Saw the proto in real life, molested for awhile.Oh really? How many kilogram? 2 or more?
It's so heavy.. *I haven't touch anything with brass plate to date except this. :p
Can't remember the exact value. More than 3 if not mistaken. ;)Wow!!! This is in the IC right now? Saw the proto in real life, molested for awhile.Oh really? How many kilogram? 2 or more?
It's so heavy.. *I haven't touch anything with brass plate to date except this. :p
Hmm little heavy. Maybe because it is feetless board.Can't remember the exact value. More than 3 if not mistaken. ;)Wow!!! This is in the IC right now? Saw the proto in real life, molested for awhile.Oh really? How many kilogram? 2 or more?
It's so heavy.. *I haven't touch anything with brass plate to date except this. :p
Maybe because the prototype was made of 7075-T6 instead of 6061 alu. Plus that brass plate. :-XHmm little heavy. Maybe because it is feetless board.Can't remember the exact value. More than 3 if not mistaken. ;)Wow!!! This is in the IC right now? Saw the proto in real life, molested for awhile.Oh really? How many kilogram? 2 or more?
It's so heavy.. *I haven't touch anything with brass plate to date except this. :p
Maybe....Bro, thank you for your interest in Jane
I think user like us interested to mass of keyboard after assembled than mass of housing & plate....
Anyway I am appreciate your help, Cal.
received another factory sample yesterday
the keyboard is very badly machined
probably need to dump more money before I can get a good one
I is very depressedShow Image(http://i.imgur.com/khlt3TE.jpg)Show Image(http://i.imgur.com/dMYttzS.jpg)Show Image(http://i.imgur.com/7aOZR63.jpg)Show Image(http://i.imgur.com/mKGYzj7.jpg)
received another factory sample yesterday
the keyboard is very badly machined
probably need to dump more money before I can get a good one
I is very depressedShow Image(http://i.imgur.com/khlt3TE.jpg)Show Image(http://i.imgur.com/dMYttzS.jpg)Show Image(http://i.imgur.com/7aOZR63.jpg)Show Image(http://i.imgur.com/mKGYzj7.jpg)
Engaged a Japenese owned factory to do the prototype today, the Jane prototype should be ready in 1-2 weeks.Everything is coming together, cool!
Finger crossed :-X
Engaged a Japenese owned factory to do the prototype today, the Jane prototype should be ready in 1-2 weeks.All the best, finger crossed
Finger crossed :-X
Very interesting indeed:eek: :thumb: Looking good!Show Image(http://i.imgur.com/c34DieY.jpg)Show Image(http://i.imgur.com/xFuZ4zw.jpg)Show Image(http://i.imgur.com/v4xB0Dl.jpg)
The keyboard is now waiting to sandblast and anodize.
Very interesting indeedShow Image(http://i.imgur.com/c34DieY.jpg)Show Image(http://i.imgur.com/xFuZ4zw.jpg)Show Image(http://i.imgur.com/v4xB0Dl.jpg)
The keyboard is now waiting to sandblast and anodize.
Very interesting indeedShow Image(http://i.imgur.com/c34DieY.jpg)Show Image(http://i.imgur.com/xFuZ4zw.jpg)Show Image(http://i.imgur.com/v4xB0Dl.jpg)
The keyboard is now waiting to sandblast and anodize.
Very interesting indeedShow Image(http://i.imgur.com/c34DieY.jpg)Show Image(http://i.imgur.com/xFuZ4zw.jpg)Show Image(http://i.imgur.com/v4xB0Dl.jpg)
The keyboard is now waiting to sandblast and anodize.
This looks gorgeous. Are there plans for a winkey option?Definitely man :thumb:
At what range are you looking at?
I am not sure if I can make it like $300. Since i am not planning to make a lot of this.At what range are you looking at?
Don't totally have one in mind, would prefer cheaper than like $300 for the whole build.
Yeah, the workmanship is perfect. I almost cried when I saw the beautifully machined chamfer.Very interesting indeedShow Image(http://i.imgur.com/c34DieY.jpg)Show Image(http://i.imgur.com/xFuZ4zw.jpg)Show Image(http://i.imgur.com/v4xB0Dl.jpg)
The keyboard is now waiting to sandblast and anodize.
That looks freaking great. Can't wait to see the final prototype :D
That's fine. We can settle for $200.I am not sure if I can make it like $300. Since i am not planning to make a lot of this.At what range are you looking at?
Don't totally have one in mind, would prefer cheaper than like $300 for the whole build.
I think the GB price will be about $400ish, since he is not making lots of it.That's fine. We can settle for $200.I am not sure if I can make it like $300. Since i am not planning to make a lot of this.At what range are you looking at?
Don't totally have one in mind, would prefer cheaper than like $300 for the whole build.
Should receive the final protoype this week#hype
cheers
update #2 19/07/15
I should receive the final prototype in a few days time. Then I will work out on the costing and have the group buy up by the end of this week. I am thinking not to make a lot of this, perhaps only 20 units to meet the MOQ. Also not looking forward to make a huge profit out of this, not loosing any money will do.
Nothing fancy, but both 84 and non-84 layout will be available. Cheers. :p
Quoteupdate #2 19/07/15
I should receive the final prototype in a few days time. Then I will work out on the costing and have the group buy up by the end of this week. I am thinking not to make a lot of this, perhaps only 20 units to meet the MOQ. Also not looking forward to make a huge profit out of this, not loosing any money will do.
Nothing fancy, but both 84 and non-84 layout will be available. Cheers. :p
There will be standard layout!!! :p
Yeah, this time prototype is made from Japenese owned factory.oh my goodness, I was following this for awhile but still was not quite convinced about it when the first prototype came out with horrible cnc flaws.Quoteupdate #2 19/07/15
I should receive the final prototype in a few days time. Then I will work out on the costing and have the group buy up by the end of this week. I am thinking not to make a lot of this, perhaps only 20 units to meet the MOQ. Also not looking forward to make a huge profit out of this, not loosing any money will do.
Nothing fancy, but both 84 and non-84 layout will be available. Cheers. :p
There will be standard layout!!! :p
now you showed the latest photo of that case (different CNC factory i presume?), you have caught my attention.
and then you have to say its available in 84 and non-84 layout, i'm sold. my body is ready, my wallet will be too! :p
now i'm getting ready an extra change of pants for your nextpr0nprototype photos. :thumb: :thumb:
Show Image(http://i.imgur.com/Xo3dNRS.png)
:p
Looks tempting.Show Image(http://i.imgur.com/Xo3dNRS.png)
:p
In which color will it be available and which firmware will it run?this board will use a87 pcb
a87 sounds good ;)In which color will it be available and which firmware will it run?this board will use a87 pcb
no issue with keymapping and bling bling led
Some standard colors, titanium grey, black, red, silver, pink.a87 sounds good ;)In which color will it be available and which firmware will it run?this board will use a87 pcb
no issue with keymapping and bling bling led
I was asking about case color.
In which color will it be available and which firmware will it run?this board will use a87 pcb
no issue with keymapping and bling bling led
If I am no wrong, it should be engraved with "TGR" in the end instead of the Chinese letter. The latest cad file he show should be the "one"In which color will it be available and which firmware will it run?this board will use a87 pcb
no issue with keymapping and bling bling led
I like this :thumb:
But I don't like chinese word (I guess) near arrow area. Hope you keep blank or engrave "TGR" there.
P/s: I 'm confusing about more your design.
I see it's numbered 14/20.yeah. Only 20pcs my friend.
Do you plan on making only 20? :P
I see it's numbered 14/20.yeah. Only 20pcs my friend.
Do you plan on making only 20? :P
I see it's numbered 14/20.yeah. Only 20pcs my friend.
Do you plan on making only 20? :P
I see it's numbered 14/20.yeah. Only 20pcs my friend.
Do you plan on making only 20? :P
Looks like I'll have to beat you guys away with a stick to get this one!
So what's the story behind the nomenclature of JANE?The keyboard is a plain Jane design!
Too late... 20/20 all gone. Pray hard that you made into the list. ;)So what's the story behind the nomenclature of JANE?The keyboard is a plain Jane design!
So all of the invoices went out already? I don't think I got in if that's the case :(Not yet.
So all of the invoices went out already? I don't think I got in if that's the case :(Not yet.