What is this...
Sent from my Pixel using Tapatalk
the x is betterWhat is this...
Sent from my Pixel using Tapatalk
you should have went for the xl!
the x is betterWhat is this...
Sent from my Pixel using Tapatalk
you should have went for the xl!
Well... How fortunate is it that I've recently acquired this little guy to use as my daily driver :DLucky you.Show Image(http://i.imgur.com/i7LRe3y.jpg)
There’s a bit of heat going around for potential Realforce cases.. hope this doesn’t drive up prices for the 87/86 :/
Sent from my iPhone using Tapatalk
Custom case for Realforce? or Topre custom keyboard?
Custom case for Realforce? or Topre custom keyboard?
The answer to this question is pivotal.
Topre custom keyboard
I hope it will come with a USB controller for the case so we can finally have a RF87 with detachable cable featureOf course!
Take my money now ! !I hope it will come with a USB controller for the case so we can finally have a RF87 with detachable cable featureOf course!
I hope it will come with a USB controller for the case so we can finally have a RF87 with detachable cable featureOf course!
what!?
Of course!
Show Image(https://i.imgur.com/6TxW7kr.jpg)
This year is looking quite nice for topre fans.
Show Image(https://i.imgur.com/6TxW7kr.jpg)
This year is looking quite nice for topre fans.
Where's the ban hammer?
Time to get all the 86u and flip later :blank:
Time to get all the 86u and flip later :blank:
shh i hope people dont find out you can just remove the barrel from the windows key spot on an 87...
With the norbauer Realforce case right around the corner, we really need some more details on this so we can make a decision :thumb: my money is going towards something.
With the norbauer Realforce case right around the corner, we really need some more details on this so we can make a decision :thumb: my money is going towards something.
It's TGR.
With the norbauer Realforce case right around the corner, we really need some more details on this so we can make a decision :thumb: my money is going towards something.
With the norbauer Realforce case right around the corner, we really need some more details on this so we can make a decision :thumb: my money is going towards something.
It's TGR.
With the norbauer Realforce case right around the corner, we really need some more details on this so we can make a decision :thumb: my money is going towards something.
It's TGR.
So? Im not going to blindly commit without knowing what it looks like, compatibility, availability, layout, cost, finishes, etc no matter who designs it.
Time to get all the 86u and flip later :blank:
shh i hope people dont find out you can just remove the barrel from the windows key spot on an 87...
I hope there's a sound bar on the side like macbookI hope there is a frog on it :thumb: :thumb:
Can we get a cerakote option to enable awesome stormtooper realforcing? :cool:
Whats up with the cerakote hype? I see it mentioned everywhere, yet ive not seen a single keyboard using it.
Whats up with the cerakote hype? I see it mentioned everywhere, yet ive not seen a single keyboard using it.
Really? Did you miss the cerakoted Romer-G group buy? Mine turned out pretty great
Way more color options than anodizing. Different finish feel. I think its more durable as well.
Whats up with the cerakote hype? I see it mentioned everywhere, yet ive not seen a single keyboard using it.
Really? Did you miss the cerakoted Romer-G group buy? Mine turned out pretty great
I dont really have any knowledge about cerakoting, so wasnt trying to be a smartass but rather a question of why so many wants it over regular anodizing.
Flatter finish tho, like hard ano but more colorful.
Flatter finish tho, like hard ano but more colorful.
You guys should see my Romer-G
Your G what?Flatter finish tho, like hard ano but more colorful.
You guys should see my Romer-G
I have fallen in love with all things TGR - i hope this can be my first.
Considering Norbauer's case is coming soon-ish, I hope we have at least a render soon. I think I speak for all of us here that we're not going to buy both cases and then pick one 🙂
U know ur path is already chosen with or without pics
Sent from my SM-G920I using Tapatalk
More slots for the rest of us :confused:
What is everyone so excited about? there isnt even a render yet.
What is everyone so excited about? there isnt even a render yet.
Programmable aluminum case for Realforce 86/87u
Zooey Name Reveal and launch of Norbaforce GB. What a time to be alive.
Forgive my ignorance here, but what makes a case programmable?
too many "o"s in the name
too many "o"s in the name
too many "d"s in yours.
too many "o"s in the name
too many "o"s in the nameShow Image(https://i.imgur.com/6bWkoFn.gif)
At this point, this thread isn't an interest check, it's a **** post.
At this point, this thread isn't an interest check, it's a **** post.
Man I wish we had somewhat of a clue on what this will look like.
Debating whether to get the Norbatouch or wait for this....
At this point, this thread isn't an interest check, it's a **** post.
indeed
Yea. Answer this man. Jesus, people!At this point, this thread isn't an interest check, it's a **** post.
indeed
The problem is that any attempt to ask questions or request information is met with fanboyish "It's TGR, how dare you ask for details?!" kind of responses.
Having two incoming case options for my Realforce I'd love to be able to compare them before I choose. However, it seems I am not allowed to know anything specific about one of them :(
You guys could just stop posting in here then... :rolleyes: :rolleyes:At this point, this thread isn't an interest check, it's a **** post.
indeed
You guys could just stop posting in here then... :rolleyes: :rolleyes:At this point, this thread isn't an interest check, it's a **** post.
indeed
Probably best to wait for Norbauer GB to end cause it will be hard to beat.
You guys could just stop posting in here then... :rolleyes: :rolleyes:At this point, this thread isn't an interest check, it's a **** post.
indeed
Don't tell me what to do.Probably best to wait for Norbauer GB to end cause it will be hard to beat.
I suspect this is the reason the IC was abandoned.
You guys could just stop posting in here then... :rolleyes: :rolleyes:At this point, this thread isn't an interest check, it's a **** post.
indeed
Don't tell me what to do.Probably best to wait for Norbauer GB to end cause it will be hard to beat.
I suspect this is the reason the IC was abandoned.
Can something be abandoned if it never started in the first place?
You guys could just stop posting in here then... :rolleyes: :rolleyes:At this point, this thread isn't an interest check, it's a **** post.
indeed
Don't tell me what to do.Probably best to wait for Norbauer GB to end cause it will be hard to beat.
I suspect this is the reason the IC was abandoned.
Can something be abandoned if it never started in the first place?
Too late for your parents.
Originally saw this thread... complete **** post. Just reread it all. Still a **** post.
Hoping this get revealed before Norbatouch ends. Gotta know what I'm waiting for :D
Originally posted on Fri, 22 September 2017.
Four months later the only real update was the word 'programmable'...
Hi guys, sorry for the lack of update. The only coordinate measuring machine that I have access to is currently broken. There's no point in posting an exterior only (10 minutes work) without the accurate measurement of the interior. You should expect the board to have a very similar outlook as my previous boards.
I am a big fan of Realforce 87u. I have like three of them somewhere in my wardrobe. Personally, I am not sure if it will feel any good in an aluminum case, I can't imagine. My plan is to have several bottoms made, hopefully, with the right bottom weight, the bottoming will still sound good.
With 910CE finalizing, hopefully, EXENT too. We should expect to have more see of more it after lunar new year. I can't promise there will be any group buy, depending on how the prototype goes. But if it ever going to happen, it should be in April.
Nevertheless, we will be seeing a prototype made in March. I promise :blank:
Hi guys, sorry for the lack of update. The only coordinate measuring machine that I have access to is currently broken. There's no point in posting an exterior only (10 minutes work) without the accurate measurement of the interior. You should expect the board to have a very similar outlook as my previous boards.
I am a big fan of Realforce 87u. I have like three of them somewhere in my wardrobe. Personally, I am not sure if it will feel any good in an aluminum case, I can't imagine. My plan is to have several bottoms made, hopefully, with the right bottom weight, the bottoming will still sound good.
With 910CE finalizing, hopefully, EXENT too. We should expect to see more of it after the lunar new year. I can't promise if there will be any group buy, depending on how the prototype goes. But if it ever going to happen, it should be in April.
Nevertheless, we will be seeing a prototype made in March. I promise :blank:
2 more prototypes coming next week I guess. Still refining the typing feel.Hi guys, sorry for the lack of update. The only coordinate measuring machine that I have access to is currently broken. There's no point in posting an exterior only (10 minutes work) without the accurate measurement of the interior. You should expect the board to have a very similar outlook as my previous boards.
I am a big fan of Realforce 87u. I have like three of them somewhere in my wardrobe. Personally, I am not sure if it will feel any good in an aluminum case, I can't imagine. My plan is to have several bottoms made, hopefully, with the right bottom weight, the bottoming will still sound good.
With 910CE finalizing, hopefully, EXENT too. We should expect to see more of it after the lunar new year. I can't promise if there will be any group buy, depending on how the prototype goes. But if it ever going to happen, it should be in April.
Nevertheless, we will be seeing a prototype made in March. I promise :blank:
Off topic, but what about TGR Alice? :(
RIP TGR Zooey? no updates for a long time...
I'm still here.
#nevergiveup
#TGR-Zooey
If this one is to be ran after Exent GB ends, I predict it to appear around 2022 together with R5 Norbaforce :)
coming soonYasss
Will this support Cherry MX?
Will this support Cherry MX?
Will this support Cherry MX?
nice
EXENT!!!!!!!!!!!!!!!!!!!May I ask when the group purchase in China will be delivered??????????????You are so cock. Does your family know???????????????
So cock. Brilliant.
Plot twist : it was the family making the post
So cock. Brilliant.
Does your family know?
Sent from my mobile using Tapatalk
EXENT!!!!!!!!!!!!!!!!!!!May I ask when the group purchase in China will be delivered??????????????You are so cock. Does your family know???????????????
Will this support Cherry MX?
I never thougth that a programmable aluminium case would be possible
I never thougth that a programmable aluminium case would be possible
It's just the case that's programmable, though.
I never thougth that a programmable aluminium case would be possible
It's just the case that's programmable, though.
Does the case support QMK and split spacebar?
I know this is still coming soon™™™™™, but can we get word on what Realforce TKL this will support? I'd imagine it would support only the OG 86 and 87u's, but with R2 and three new SKUs looming on the horizon (according to KeyChatter) I wonder if these models will have any influence on Yuktsi's final design or if at all
Please, tell me this is still happening
if this and the xrf are both no longer happening i'm gonna be real sad
someone design a nice, classic-style rf case please; there's actually a decent gap in the market for one
Can't speak for Yuktsi but my development funds ran dry.
Can't speak for Yuktsi but my development funds ran dry.
receipt taken
Please, tell me this is still happening
have not heard anything about it since at least october of last year, but sam isn't really one to drop projects entirely
don't hold your breath though
Christmas came early guys!
Christmas came early guys!
this topic is a year and a half old
Will this replace my Norbaforce? I think so...