Author Topic: Thank You, Geekhack || [GB] GMK Electric Bluegaloo Mod Set, Escape Pack (Read 468056 times)

64rky · « **Reply #1450 on:** Thu, 28 January 2016, 13:25:08 »

Mine is out for delivery!!!!! Soooo excited. Now just need my stabilizers and I can get my Orion up and running for this and that TA set

ATXTider · « **Reply #1451 on:** Thu, 28 January 2016, 13:41:21 »

Have all the orders shipped yet?

Giorgio · « **Reply #1452 on:** Thu, 28 January 2016, 13:41:26 »

Quote from: CommonCurt on Thu, 28 January 2016, 05:21:46

Paired with Olivetti

Show Image

Please remove this picture, I want it too much. Can you add some pixelation?

asgeirtj · « **Reply #1453 on:** Thu, 28 January 2016, 16:08:14 »

Quote from: CommonCurt on Thu, 28 January 2016, 05:21:46

Paired with Olivetti

Show Image

holy ****ing **** dude congratulations on that beautiful board!

jackiecanev2 · « **Reply #1454 on:** Thu, 28 January 2016, 16:43:21 »

Didn't get a notification, but I came home and these were in my mailbox. Score!

slip84 · « **Reply #1455 on:** Thu, 28 January 2016, 20:08:48 »

Haven't had a chance to read back through all the pages here. Real life is being really real right now. Has mine shipped? I haven't received a notification for what it's worth.

64rky · « **Reply #1456 on:** Thu, 28 January 2016, 20:14:48 »

Quote from: slip84 on Thu, 28 January 2016, 20:08:48

Haven't had a chance to read back through all the pages here. Real life is being really real right now. Has mine shipped? I haven't received a notification for what it's worth.

I never received official notification, mine arrived today... so I wouldn't worry, give it until the weekend.

ATXTider · « **Reply #1457 on:** Thu, 28 January 2016, 21:10:55 »

Quote from: jackiecanev2 on Thu, 28 January 2016, 16:43:21

Didn't get a notification, but I came home and these were in my mailbox. Score!

Same!

sica · « **Reply #1458 on:** Fri, 29 January 2016, 02:05:36 »

What about outside of US?
Is it preparing for shipping?

billnye · « **Reply #1459 on:** Fri, 29 January 2016, 09:42:45 »

Hey everyone, just wanted to post an update.

My plan was to start on international orders tomorrow, but I got the opportunity to go see Maddie run in Tennessee

. So instead I'll be travelling this weekend and won't be able to get any orders shipped.

Once I'm back I will start working on getting international orders out. I hope everyone has a great weekend!

luckyryan333 · « **Reply #1460 on:** Fri, 29 January 2016, 09:50:17 »

Quote from: billnye on Fri, 29 January 2016, 09:42:45

Hey everyone, just wanted to post an update.

My plan was to start on international orders tomorrow, but I got the opportunity to go see Maddie run in Tennessee . So instead I'll be travelling this weekend and won't be able to get any orders shipped.

Once I'm back I will start working on getting international orders out. I hope everyone has a great weekend!

have a nice trip and a good time with your M.

CommonCurt · « **Reply #1461 on:** Fri, 29 January 2016, 16:17:15 »

Quote from: Giorgio on Thu, 28 January 2016, 13:41:26

Quote from: CommonCurt on Thu, 28 January 2016, 05:21:46
Paired with Olivetti
Show Image

Please remove this picture, I want it too much. Can you add some pixelation?

Can't do it :)

Quote from: asgeirtj on Thu, 28 January 2016, 16:08:14

Quote from: CommonCurt on Thu, 28 January 2016, 05:21:46
Paired with Olivetti
Show Image

holy ****ing **** dude congratulations on that beautiful board!

Thanks

ideus · « **Reply #1462 on:** Fri, 29 January 2016, 16:41:49 »

Quote from: billnye on Fri, 29 January 2016, 09:42:45

Hey everyone, just wanted to post an update.

My plan was to start on international orders tomorrow, but I got the opportunity to go see Maddie run in Tennessee . So instead I'll be travelling this weekend and won't be able to get any orders shipped.

Once I'm back I will start working on getting international orders out. I hope everyone has a great weekend!

To see Maddie is the only reason we can tolerate for the extra waiting time, ..., "joking" enjoy your time.

ATXTider · « **Reply #1463 on:** Fri, 29 January 2016, 22:23:54 »

As an extra bonus, the Green on Beige Esc key perfectly matches the mod color from Ivan's R4, which means it should also match Shadowed's GB as well!

Thank You, Geekhack || [GB] GMK Electric Bluegaloo Mod Set, Escape Pack

ideus · « **Reply #1464 on:** Fri, 29 January 2016, 22:36:55 »

Quote from: ATXTider on Fri, 29 January 2016, 22:23:54

As an extra bonus, the Green on Beige Esc key perfectly matches the mod color from Ivan's R4, which means it should also match Shadowed's GB as well!
(Attachment Link)

What about OG Beige?

Puddsy · « **Reply #1465 on:** Fri, 29 January 2016, 23:09:49 »

I don't actually know what I ordered.

I can't get to the package, because it's at home and I'm at school.

Refresh my memory please.

ATXTider · « **Reply #1466 on:** Fri, 29 January 2016, 23:23:27 »

Quote from: ideus on Fri, 29 January 2016, 22:36:55

Quote from: ATXTider on Fri, 29 January 2016, 22:23:54
As an extra bonus, the Green on Beige Esc key perfectly matches the mod color from Ivan's R4, which means it should also match Shadowed's GB as well!
(Attachment Link)

What about OG Beige?

It doesn't match the OG beige set I have. The cap is on my work board, I'll take an OG cap in on Monday.

TalkingTree · « **Reply #1467 on:** Sat, 30 January 2016, 05:55:57 »

I got my set a few days ago but I've been to ~~lazy~~ busy to put them on a keyboard and post a picture.
Well, finally, I decided to put them with OG Olivetti.
Unfortunately I don't have a 6.25u spacebar with centered stem.

It would be great if someone ran a GB for AltGr key.

Thumper_ · « **Reply #1468 on:** Sat, 30 January 2016, 05:57:29 »

Quote from: TalkingTree on Sat, 30 January 2016, 05:55:57

I got my set a few days ago but I've been to ~~lazy~~ busy to put them on a keyboard and post a picture.
Well, finally, I decided to put them with OG Olivetti.
Unfortunately I don't have a 6.25u spacebar with centered stem.

Show Image

It would be great if someone ran a GB for AltGr key.

I have a spare 6.25x center stemmed space bar in the same beige as the log g80-3000 keycaps in cherry profile. Where are you from? Maybe we can work something out.

TalkingTree · « **Reply #1469 on:** Sat, 30 January 2016, 05:58:20 »

Quote from: Thumper_ on Sat, 30 January 2016, 05:57:29

I have a spare 6.25x center stemmed space bar in the same beige as the log g80-3000 keycaps in cherry profile. Where are you from? Maybe we can work something out.

South of Italy, good sir.

Thumper_ · « **Reply #1470 on:** Sat, 30 January 2016, 05:59:09 »

Quote from: TalkingTree on Sat, 30 January 2016, 05:58:20

Quote from: Thumper_ on Sat, 30 January 2016, 05:57:29
I have a spare 6.25x center stemmed space bar in the same beige as the log g80-3000 keycaps in cherry profile. Where are you from? Maybe we can work something out.
South of Italy, good sir.

Germany. Shoot me your address via pm, you can have it for shipping cost

strict · « **Reply #1471 on:** Sat, 30 January 2016, 08:39:22 »

Have all the US orders shipped? I never got a notification and MyUSPS doesn't show anything in the mail destined for my address.

Prelim · « **Reply #1472 on:** Sat, 30 January 2016, 12:38:34 »

Is there anyone who use ansi boards and might be willing to spare the ISO Enter cap? (preferably from EU)

Thanks!

ideus · « **Reply #1473 on:** Sat, 30 January 2016, 14:11:21 »

Quote from: strict on Sat, 30 January 2016, 08:39:22

Have all the US orders shipped? I never got a notification and MyUSPS doesn't show anything in the mail destined for my address.

I'd be better to PM billnye, instead of posting here.

shawn o · « **Reply #1474 on:** Sat, 30 January 2016, 14:33:41 »

Same here

Quote from: Prelim on Sat, 30 January 2016, 12:38:34

Is there anyone who use ansi boards and might be willing to spare the ISO Enter cap? (preferably from EU)

Thanks!

Thumper_ · « **Reply #1475 on:** Sat, 30 January 2016, 14:44:52 »

Quote from: shawn o on Sat, 30 January 2016, 14:33:41

Same here

Quote from: Prelim on Sat, 30 January 2016, 12:38:34
Is there anyone who use ansi boards and might be willing to spare the ISO Enter cap? (preferably from EU)

Thanks!

Didn't you leave the GB yesterday?

shawn o · « **Reply #1476 on:** Sat, 30 January 2016, 19:41:18 »

Once caps are received or refund given for payment sent 8 months ago.

lolpes · « **Reply #1477 on:** Sat, 30 January 2016, 19:44:07 »

Quote from: TalkingTree on Sat, 30 January 2016, 05:55:57

I got my set a few days ago but I've been to ~~lazy~~ busy to put them on a keyboard and post a picture.
Well, finally, I decided to put them with OG Olivetti.
Unfortunately I don't have a 6.25u spacebar with centered stem.

Show Image

It would be great if someone ran a GB for AltGr key.

Well I have the same set, waiting for the same mods :D

ideus · « **Reply #1478 on:** Sat, 30 January 2016, 20:53:29 »

Quote from: TalkingTree on Sat, 30 January 2016, 05:55:57

I got my set a few days ago but I've been to ~~lazy~~ busy to put them on a keyboard and post a picture.
Well, finally, I decided to put them with OG Olivetti.
Unfortunately I don't have a 6.25u spacebar with centered stem.

Show Image

It would be great if someone ran a GB for AltGr key.

Just use the second Alt, I write in Spanish with an US international ANSI Layout and I have never needed an AltGr key except for aesthetic reasons.

TalkingTree · « **Reply #1479 on:** Sun, 31 January 2016, 02:43:17 »

Quote from: lolpes on Sat, 30 January 2016, 19:44:07

Well I have the same set, waiting for the same mods

Wow, it looks great on a 75%.

TalkingTree · « **Reply #1480 on:** Sun, 31 January 2016, 02:43:45 »

Quote from: ideus on Sat, 30 January 2016, 20:53:29

Just use the second Alt, I write in Spanish with an US international ANSI Layout and I have never needed an AltGr key except for aesthetic reasons.

You got it.

billnye · « **Reply #1481 on:** Sun, 31 January 2016, 08:14:53 »

Hey everyone. I'm on my way back from Nashville now. When I get home this afternoon I plan to package up the 4 or 5 US orders that I missed going down the spreadsheet.

Once the week starts, the first few international orders will start going out.

Quote from: Thumper_ on Sat, 30 January 2016, 05:59:09

Quote from: TalkingTree on Sat, 30 January 2016, 05:58:20
Quote from: Thumper_ on Sat, 30 January 2016, 05:57:29
I have a spare 6.25x center stemmed space bar in the same beige as the log g80-3000 keycaps in cherry profile. Where are you from? Maybe we can work something out.
South of Italy, good sir.

Germany. Shoot me your address via pm, you can have it for shipping cost

I appreciate your generosity! I'll throw an extra escape pack or two in your order.

Quote from: strict on Sat, 30 January 2016, 08:39:22

Have all the US orders shipped? I never got a notification and MyUSPS doesn't show anything in the mail destined for my address.

I missed a few going down the spreadsheet. It'll be going out tomorrow.

rowdy · « **Reply #1482 on:** Sun, 31 January 2016, 19:46:52 »

Excitement news!

Have a safe trip

shawn o · « **Reply #1483 on:** Sun, 31 January 2016, 20:05:07 »

Thanks! Sorry for being critical. I've organized 2 group buys myself with SP in the past and held myself to a very strict timline for shipping. It was a very rough week for me both times....I should have taken my time I guess and spread it out.

ehwc · « **Reply #1484 on:** Mon, 01 February 2016, 17:20:08 »

Haven't had the time to check if all the keys are there, but just wanted to to note that I've safely received them! Thanks!

Pemdas · « **Reply #1485 on:** Mon, 01 February 2016, 20:45:56 »

Whoo got my set! Kinda forgot about these so was a nice surprise to see them in the mail box. Just gotta figure out which set I'm going to use them with

Thanks so much billnye

Edit

This is the cutest shift I have ever seen

filphil · « **Reply #1486 on:** Wed, 03 February 2016, 21:13:34 »

Thanks billnye for getting it out!

ideus · « **Reply #1487 on:** Wed, 03 February 2016, 23:06:16 »

Quote from: filphil on Wed, 03 February 2016, 21:13:34

Thanks billnye for getting it out!

Show Image

Are the light and white balance dimmed? It seems that the blue in the picture is darker than the actual ABS plastic is.

filphil · « **Reply #1488 on:** Thu, 04 February 2016, 02:10:07 »

Quote from: ideus on Wed, 03 February 2016, 23:06:16

Quote from: filphil on Wed, 03 February 2016, 21:13:34
Thanks billnye for getting it out!

Show Image

Are the light and white balance dimmed? It seems that the blue in the picture is darker than the actual ABS plastic is.

I used a gray card to set the white balance in conjunction with a speedlight. If anything the blues should b a little brighter since i brought up the highlights and dialed down the shadows a small amount.

64rky · « **Reply #1489 on:** Thu, 04 February 2016, 05:31:28 »

Quote from: filphil on Wed, 03 February 2016, 21:13:34

Thanks billnye for getting it out!

Show Image

This is a great pic sir

ideus · « **Reply #1490 on:** Thu, 04 February 2016, 07:18:04 »

Quote from: filphil on Thu, 04 February 2016, 02:10:07

Quote from: ideus on Wed, 03 February 2016, 23:06:16
Quote from: filphil on Wed, 03 February 2016, 21:13:34
Thanks billnye for getting it out!

Show Image

Are the light and white balance dimmed? It seems that the blue in the picture is darker than the actual ABS plastic is.

I used a gray card to set the white balance in conjunction with a speedlight. If anything the blues should b a little brighter since i brought up the highlights and dialed down the shadows a small amount.

That explains why the blue looks darker than in real life, even the white legends looks a bit down to yellow-brown.

64rky · « **Reply #1491 on:** Thu, 04 February 2016, 10:27:10 »

Quote from: filphil on Wed, 03 February 2016, 21:13:34

Thanks billnye for getting it out!

Show Image

Which alphas are those?

filphil · « **Reply #1492 on:** Thu, 04 February 2016, 11:46:35 »

Quote from: 64rky on Thu, 04 February 2016, 10:27:10

Quote from: filphil on Wed, 03 February 2016, 21:13:34
Thanks billnye for getting it out!

Show Image

Which alphas are those?

Olivetti

Quote from: ideus on Thu, 04 February 2016, 07:18:04

Quote from: filphil on Thu, 04 February 2016, 02:10:07
Quote from: ideus on Wed, 03 February 2016, 23:06:16
Quote from: filphil on Wed, 03 February 2016, 21:13:34
Thanks billnye for getting it out!

Show Image

Are the light and white balance dimmed? It seems that the blue in the picture is darker than the actual ABS plastic is.

I used a gray card to set the white balance in conjunction with a speedlight. If anything the blues should b a little brighter since i brought up the highlights and dialed down the shadows a small amount.

That explains why the blue looks darker than in real life, even the white legends looks a bit down to yellow-brown.

Now that I think about it the flash is bounced from the ceiling. The photo is likely underexposed by a stop or two. Although that's a deliberate choice to darken the keyboard and desk pad it was shot on.

ideus · « **Reply #1493 on:** Thu, 04 February 2016, 12:16:20 »

Quote from: filphil on Thu, 04 February 2016, 11:46:35

Quote from: 64rky on Thu, 04 February 2016, 10:27:10
Quote from: filphil on Wed, 03 February 2016, 21:13:34
Thanks billnye for getting it out!

Show Image

Which alphas are those?

Olivetti

Quote from: ideus on Thu, 04 February 2016, 07:18:04
Quote from: filphil on Thu, 04 February 2016, 02:10:07
Quote from: ideus on Wed, 03 February 2016, 23:06:16
Quote from: filphil on Wed, 03 February 2016, 21:13:34
Thanks billnye for getting it out!

Show Image

Are the light and white balance dimmed? It seems that the blue in the picture is darker than the actual ABS plastic is.

I used a gray card to set the white balance in conjunction with a speedlight. If anything the blues should b a little brighter since i brought up the highlights and dialed down the shadows a small amount.

That explains why the blue looks darker than in real life, even the white legends looks a bit down to yellow-brown.

Now that I think about it the flash is bounced from the ceiling. The photo is likely underexposed by a stop or two. Although that's a deliberate choice to darken the keyboard and desk pad it was shot on.

I'd love that the actual blue of the plastic were as they look in your picture.

xondat · « **Reply #1494 on:** Thu, 04 February 2016, 13:10:58 »

Quote from: filphil on Wed, 03 February 2016, 21:13:34

Thanks billnye for getting it out!

Show Image

Ooh that picture is pretty.

billnye · « **Reply #1495 on:** Sat, 06 February 2016, 10:47:35 »

Here for a quick update. Second semester has kept me pretty busy so far, so I haven't had any time to get orders out during the weeks.

My goal for this weekend is to get at least 30 orders out. The US orders I missed and some international orders will be shipped Monday.

I hope everyone has a great weekend and go Panthers!

Wulkes · « **Reply #1496 on:** Sat, 06 February 2016, 11:13:23 »

Finally getting around to taking pics of my set paired with OG Desko on my MJ2.

Big thanks Mr. billnye for running the show. Your efforts are greatly appreciated.

Anyone get one of the BroBots yet? Haven't seen one posted, hoping I still have a chance

billnye · « **Reply #1497 on:** Sat, 06 February 2016, 11:39:57 »

Also, for international people concerned over the new higher shipping costs.

The price I charged for shipping was $9. The price has now gone up to $13.5 for shipping +$.5 for each bubble mailer I use. If any international people would like to send $5 to cover the difference I would greatly appreciate it and love you long time, but it is not required.

If you do decide to contribute anything, please send the money to billnyegb at gmail.com.

Thank you all for your generosity.

Quote from: Wulkes on Sat, 06 February 2016, 11:13:23

Show Image

Finally getting around to taking pics of my set paired with OG Desko on my MJ2.

Big thanks Mr. billnye for running the show. Your efforts are greatly appreciated.

Anyone get one of the BroBots yet? Haven't seen one posted, hoping I still have a chance :-[

Looks good! Bro said recently that the caps are finishing up soon, so I would expect to see them being shipped in the next few weeks.

Thumper_ · « **Reply #1498 on:** Sat, 06 February 2016, 11:45:37 »

Quote from: billnye on Sat, 06 February 2016, 11:39:57

Also, for international people concerned over the new higher shipping costs.

The price I charged for shipping was $9. The price has now gone up to $13.5 for shipping +$.5 for each bubble mailer I use. If any international people would like to send $5 to cover the difference I would greatly appreciate it and love you long time, but it is not required.

If you do decide to contribute anything, please send the money to billnyegb at gmail.com.

Thank you all for your generosity.

Quote from: Wulkes on Sat, 06 February 2016, 11:13:23
Show Image

Finally getting around to taking pics of my set paired with OG Desko on my MJ2.

Big thanks Mr. billnye for running the show. Your efforts are greatly appreciated.

Anyone get one of the BroBots yet? Haven't seen one posted, hoping I still have a chance :-[
Looks good! Bro said recently that the caps are finishing up soon, so I would expect to see them being shipped in the next few weeks.

I send you some moneys.

ideus · « **Reply #1499 on:** Sat, 06 February 2016, 13:40:35 »

Quote from: billnye on Sat, 06 February 2016, 11:39:57

Also, for international people concerned over the new higher shipping costs.

The price I charged for shipping was $9. The price has now gone up to $13.5 for shipping +$.5 for each bubble mailer I use. If any international people would like to send $5 to cover the difference I would greatly appreciate it and love you long time, but it is not required.

If you do decide to contribute anything, please send the money to billnyegb at gmail.com.

Thank you all for your generosity.

Quote from: Wulkes on Sat, 06 February 2016, 11:13:23
Show Image

Finally getting around to taking pics of my set paired with OG Desko on my MJ2.

Big thanks Mr. billnye for running the show. Your efforts are greatly appreciated.

Anyone get one of the BroBots yet? Haven't seen one posted, hoping I still have a chance :-[
Looks good! Bro said recently that the caps are finishing up soon, so I would expect to see them being shipped in the next few weeks.

Money sent. Thank you again bill, please start sending me good vibes and love... :p

News:

Author Topic: Thank You, Geekhack || [GB] GMK Electric Bluegaloo Mod Set, Escape Pack (Read 468056 times)