[GB] M65-A | Made with RAMA.WORKS (Complete)

[Puddsy]

my mira invoice was 114b because i bought the slot off someone else

for example

is it too late now to buy someone else's slot? #regreteffect

for mira or m65?

[jchan94]

Day 2 is over, and today I got through a lot more than expected.

There are boards that have this small anodization issues, but our amazing manufacturer is going to fix them. The anodization issue is only apparent when you shine light on it a certain direction. But it bugs the hell out of me.




I should be done with most of the gb this Friday, and then I will be forwarding the units to them, and they will be fixed in a week or two.

Extra units are being used to make sure everyone gets their unit within the GB. After that, the units that come back will be used for extras, and we'll have our r2 colors as well.

[anthonyooiszewen]

Thanks for the updates! How will we know whether we're affected by the anodization issues? Also, do you have an estimated percentage of the boards affected? (at least from what you've seen so far)

[BAS1C]

and we'll have our r2 colors as well.

R2 samples? ? ? ? ?? ?? ??

Great updates man, keep em coming! Looks like major progress today. Can't wait to see my number out the door!

[jchan94]

Thanks for the updates! How will we know whether we're affected by the anodization issues? Also, do you have an estimated percentage of the boards affected? (at least from what you've seen so far)

No one will know because i'm using extras to replace them .

[quanghuy1200]

Still waiting for 480

Sent from my Redmi Note 3 using Tapatalk

[forevermadrigal]

mine.. was.. so.. close..

[Arallu]

The 100's must be in the back lol.

[mnmlisme]

my mira invoice was 114b because i bought the slot off someone else

for example

is it too late now to buy someone else's slot? #regreteffect

for mira or m65?

m65

[wongie]

my mira invoice was 114b because i bought the slot off someone else

for example

is it too late now to buy someone else's slot? #regreteffect

for mira or m65?

m65

Too late. Your best bet is to wait for extras.

[KINGPIN]

Come-on 111, work your magic and get shipped today
Also curses those who ever the **** covers the other's number to be in the final 10%

[Sarillexis]

My invoice is #35.  This thread has 35 pages.  Coincidence?  Obviously not.

[TerryMathews]

So Jchan, if you have any extras that don't need sent back for reanodizing are you going to sell them "now", or hold them for the reanodizing boards to come back?

Just wondering if I should stop watching for extras for a while.

[petrock]

I almost forgot. Whats the status of the mouse pads?

[kmba]

mouse pads?  those shipped a while ago.  extras?  maybe when his website is complete.

[kawasaki161]

mouse pads?  those shipped a while ago.  extras?  maybe when his website is complete.

I think he means the M65 mouse pads, not the Cherry ones.

[kmba]

mouse pads?  those shipped a while ago.  extras?  maybe when his website is complete.

I think he means the M65 mouse pads, not the Cherry ones.

ahh yes, that makes sense    forgot about those

[BAS1C]

So Jchan, if you have any extras that don't need sent back for reanodizing are you going to sell them "now", or hold them for the reanodizing boards to come back?

Just wondering if I should stop watching for extras for a while.

iirc he said he would send an update via his email update about extras when the time comes with 7 day warning. I'd just post up and wait mayne

[jchan94]

So Jchan, if you have any extras that don't need sent back for reanodizing are you going to sell them "now", or hold them for the reanodizing boards to come back?

Just wondering if I should stop watching for extras for a while.

Extras will be sold only after I can do another inventory check after I finish shipping everyone who participated.

If you're on the keyclack mailing list or follow on Instagram, or browse rmk daily, you'll be fine with getting a notification or a heads up.

[Valaris]

So Jchan, if you have any extras that don't need sent back for reanodizing are you going to sell them "now", or hold them for the reanodizing boards to come back?

Just wondering if I should stop watching for extras for a while.

Extras will be sold only after I can do another inventory check after I finish shipping everyone who participated.

If you're on the keyclack mailing list or follow on Instagram, or browse rmk daily, you'll be fine with getting a notification or a heads up.

You should make an FAQ at the top of every page:

Q: Where is my M65?
A: I'm shipping them as fast as I can

Q: When will there be R2/Extras available for sale?
A: Sign up to the mailing list to be the first to know.

Q: Any announcements for R2?
A: After R1 is over.

[Marutks]

this mailing list?  https://www.keyclack.com/signup

[jchan94]

this mailing list?  https://www.keyclack.com/signup

Direct Link - https://eepurl.com/coAJ5r

[jchan94]

You know when you feel like everything is going your way?

Well, nothing like knocking ya backwards.

It seems that GMK didn't send me my full batch of stabilizers from a few months ago. I bought 700 2u stabilizers, but it seems I only got 200. I have about 20 left, and have emailed them about getting the last batch, or buying some new ones immediately. I have enough 6.25u and 7u, but without 2u, I'm stuck.

Waiting for GMK to reply. Hopefully they can expedite something.

[delivery]

Hoping for good news, from GMK

[jjwax]

You know when you feel like everything is going your way?

Well, nothing like knocking ya backwards.

It seems that GMK didn't send me my full batch of stabilizers from a few months ago. I bought 700 2u stabilizers, but it seems I only got 200. I have about 20 left, and have emailed them about getting the last batch, or buying some new ones immediately. I have enough 6.25u and 7u, but without 2u, I'm stuck.

Waiting for GMK to reply. Hopefully they can expedite something.

Well, when it rains, it pours.  My mortgage scheduled to close in 2 days just fell apart because the company is getting sued.   I just updated my address for my m65-a, too.  At least with this GMK delay, I might still be ok

[Valaris]

Edit: nvm

[a clacktical mistake]

Oops, that doesn't sound great .. Actually I was about to ask, how many 2u stabs will come with the board?

[eksuen]

Oops, that doesn't sound great .. Actually I was about to ask, how many 2u stabs will come with the board?

Four 2u stabs for Backspace, Enter, Right Shift, Left Shift. Of course, you may not use them all depending on your layout.

[Zanduby]

You know when you feel like everything is going your way?

Well, nothing like knocking ya backwards.

It seems that GMK didn't send me my full batch of stabilizers from a few months ago. I bought 700 2u stabilizers, but it seems I only got 200. I have about 20 left, and have emailed them about getting the last batch, or buying some new ones immediately. I have enough 6.25u and 7u, but without 2u, I'm stuck.

Waiting for GMK to reply. Hopefully they can expedite something.

 

nooooooooooooo

sorry to hear about that, hopefully they get back with you soon.

[duynguyenle]

You know when you feel like everything is going your way?

Well, nothing like knocking ya backwards.

It seems that GMK didn't send me my full batch of stabilizers from a few months ago. I bought 700 2u stabilizers, but it seems I only got 200. I have about 20 left, and have emailed them about getting the last batch, or buying some new ones immediately. I have enough 6.25u and 7u, but without 2u, I'm stuck.

Waiting for GMK to reply. Hopefully they can expedite something.

Jchan feel free to send mine without stabilisers if that means I will get the board without having to wait for GMK shipment to come in (I don't even remembered if I ordered any, but I certainly don't need any more now, seeing as I recently bought 20 kits of GMK screw mounted stabs)  )

[a clacktical mistake]

Oops, that doesn't sound great .. Actually I was about to ask, how many 2u stabs will come with the board?

Four 2u stabs for Backspace, Enter, Right Shift, Left Shift. Of course, you may not use them all depending on your layout.

Thanks. But .. that's actually 2x 2u short for the split space / split backspace layout. I think it uses 6 if I count correctly. I have a 2u stab wire left but not 1 screw in stab 

[eksuen]

Oops, that doesn't sound great .. Actually I was about to ask, how many 2u stabs will come with the board?

Four 2u stabs for Backspace, Enter, Right Shift, Left Shift. Of course, you may not use them all depending on your layout.

Thanks. But .. that's actually 2x 2u short for the split space / split backspace layout. I think it uses 6 if I count correctly. I have a 2u stab wire left but not 1 screw in stab 

Ah, forgot this supports split space.

[a clacktical mistake]

You know when you feel like everything is going your way?

Well, nothing like knocking ya backwards.

It seems that GMK didn't send me my full batch of stabilizers from a few months ago. I bought 700 2u stabilizers, but it seems I only got 200. I have about 20 left, and have emailed them about getting the last batch, or buying some new ones immediately. I have enough 6.25u and 7u, but without 2u, I'm stuck.

Waiting for GMK to reply. Hopefully they can expedite something.

Jchan feel free to send mine without stabilisers if that means I will get the board without having to wait for GMK shipment to come in (I don't even remembered if I ordered any, but I certainly don't need any more now, seeing as I recently bought 20 kits of GMK screw mounted stabs)  )

Where did you order them? Better check if it's really 20 sets but should be enough for the m65 in any case

[anthonyooiszewen]

How about an option for a $5 refund/store credit (or whatever amount you deem is fair) instead of waiting on the 2u stabilizers? To be honest, it's getting kinda exhausting keeping up with the numerous delays.

[TerryMathews]

So Jchan, if you have any extras that don't need sent back for reanodizing are you going to sell them "now", or hold them for the reanodizing boards to come back?

Just wondering if I should stop watching for extras for a while.

Extras will be sold only after I can do another inventory check after I finish shipping everyone who participated.

If you're on the keyclack mailing list or follow on Instagram, or browse rmk daily, you'll be fine with getting a notification or a heads up.

You should make an FAQ at the top of every page:

Q: Where is my M65?
A: I'm shipping them as fast as I can

Q: When will there be R2/Extras available for sale?
A: Sign up to the mailing list to be the first to know.

Q: Any announcements for R2?
A: After R1 is over.

Don't be a ****. "Will you sell some extras now and the rest later" had yet to be asked, because the topic of some boards needing refinishing had just been brought up.

[duynguyenle]

You know when you feel like everything is going your way?

Well, nothing like knocking ya backwards.

It seems that GMK didn't send me my full batch of stabilizers from a few months ago. I bought 700 2u stabilizers, but it seems I only got 200. I have about 20 left, and have emailed them about getting the last batch, or buying some new ones immediately. I have enough 6.25u and 7u, but without 2u, I'm stuck.

Waiting for GMK to reply. Hopefully they can expedite something.

Jchan feel free to send mine without stabilisers if that means I will get the board without having to wait for GMK shipment to come in (I don't even remembered if I ordered any, but I certainly don't need any more now, seeing as I recently bought 20 kits of GMK screw mounted stabs)  )

Where did you order them? Better check if it's really 20 sets but should be enough for the m65 in any case

From a GB MechBoards hosted last month

[Valaris]

So Jchan, if you have any extras that don't need sent back for reanodizing are you going to sell them "now", or hold them for the reanodizing boards to come back?

Just wondering if I should stop watching for extras for a while.

Extras will be sold only after I can do another inventory check after I finish shipping everyone who participated.

If you're on the keyclack mailing list or follow on Instagram, or browse rmk daily, you'll be fine with getting a notification or a heads up.

You should make an FAQ at the top of every page:

Q: Where is my M65?
A: I'm shipping them as fast as I can

Q: When will there be R2/Extras available for sale?
A: Sign up to the mailing list to be the first to know.

Q: Any announcements for R2?
A: After R1 is over.

Don't be a ****. "Will you sell some extras now and the rest later" had yet to be asked, because the topic of some boards needing refinishing had just been brought up.

Sorry you took it as a personal attack but considering how many times Jchan has to reply the same thing to questions, my suggestion stands.

[DreLLin]

Would also pass on the stabs if that means faster shipping.

[Tally810]

 Will pass on stabs too jchan

Sent from my SM-G928V using Tapatalk

[jchan94]

How about an option for a $5 refund/store credit (or whatever amount you deem is fair) instead of waiting on the 2u stabilizers? To be honest, it's getting kinda exhausting keeping up with the numerous delays.

QC is the bigger part that is slowing everything down. I'm inspecting all of them 1 at a time to assure the quality of the board, anodization and more. And as far as delays go: customs, I got sick, and GMK didn't send me all the 2u stabs (which is also my fault since I didn't do an inventory check), but nonetheless, I can still QC all the boards.

I think i might be done with M65-A after this ; it's time to rest this weary soul.

[Fictiouz]

How about an option for a $5 refund/store credit (or whatever amount you deem is fair) instead of waiting on the 2u stabilizers? To be honest, it's getting kinda exhausting keeping up with the numerous delays.

QC is the bigger part that is slowing everything down. I'm inspecting all of them 1 at a time to assure the quality of the board, anodization and more. And as far as delays go: customs, I got sick, and GMK didn't send me all the 2u stabs (which is also my fault since I didn't do an inventory check), but nonetheless, I can still QC all the boards.

I think i might be done with M65-A after this ; it's time to rest this weary soul.

i hate to bug you but check slack right quick

[anthonyooiszewen]

How about an option for a $5 refund/store credit (or whatever amount you deem is fair) instead of waiting on the 2u stabilizers? To be honest, it's getting kinda exhausting keeping up with the numerous delays.

QC is the bigger part that is slowing everything down. I'm inspecting all of them 1 at a time to assure the quality of the board, anodization and more. And as far as delays go: customs, I got sick, and GMK didn't send me all the 2u stabs (which is also my fault since I didn't do an inventory check), but nonetheless, I can still QC all the boards.

I think i might be done with M65-A after this ; it's time to rest this weary soul.

Oh, I definitely understand it's more exhausting for you, which is why I suggested a simple store credit option for the ones who don't want to wait for the stabs to come in from GMK (who aren't the fastest at communication).

That way the ones who get who don't want to wait any longer get their boards sooner, and you don't have to sit around after QC just waiting for the stabs to come in.

[Tally810]

How about an option for a $5 refund/store credit (or whatever amount you deem is fair) instead of waiting on the 2u stabilizers? To be honest, it's getting kinda exhausting keeping up with the numerous delays.

QC is the bigger part that is slowing everything down. I'm inspecting all of them 1 at a time to assure the quality of the board, anodization and more. And as far as delays go: customs, I got sick, and GMK didn't send me all the 2u stabs (which is also my fault since I didn't do an inventory check), but nonetheless, I can still QC all the boards.

I think i might be done with M65-A after this ; it's time to rest this weary soul.

Stuff happens dude.  Like I mentioned before I'd be happy to pass on the stabs (I dont need a credit) just to get this thing ready for the Austin meetup.  Thx

Sent from my SM-G928V using Tapatalk

[jchan94]

Day 3 listed up.

I had to spend a chunk of the day gathering extras and organizing / sorting them, and packing up some units to be fixed so we can get all of this done asap.

Cheers. Have a good night ya'll.

[duynguyenle]

Don't need any kinda credits either, keep it as a top for your hard work 

[pr0ximity]

How about an option for a $5 refund/store credit (or whatever amount you deem is fair) instead of waiting on the 2u stabilizers? To be honest, it's getting kinda exhausting keeping up with the numerous delays.

QC is the bigger part that is slowing everything down. I'm inspecting all of them 1 at a time to assure the quality of the board, anodization and more. And as far as delays go: customs, I got sick, and GMK didn't send me all the 2u stabs (which is also my fault since I didn't do an inventory check), but nonetheless, I can still QC all the boards.

I think i might be done with M65-A after this ; it's time to rest this weary soul.

Oh, I definitely understand it's more exhausting for you, which is why I suggested a simple store credit option for the ones who don't want to wait for the stabs to come in from GMK (who aren't the fastest at communication).

That way the ones who get who don't want to wait any longer get their boards sooner, and you don't have to sit around after QC just waiting for the stabs to come in.

More bookkeeping and logistics, splitting up units into more SKUs is another chunk of work.

[jchan94]

How about an option for a $5 refund/store credit (or whatever amount you deem is fair) instead of waiting on the 2u stabilizers? To be honest, it's getting kinda exhausting keeping up with the numerous delays.

QC is the bigger part that is slowing everything down. I'm inspecting all of them 1 at a time to assure the quality of the board, anodization and more. And as far as delays go: customs, I got sick, and GMK didn't send me all the 2u stabs (which is also my fault since I didn't do an inventory check), but nonetheless, I can still QC all the boards.

I think i might be done with M65-A after this ; it's time to rest this weary soul.

Oh, I definitely understand it's more exhausting for you, which is why I suggested a simple store credit option for the ones who don't want to wait for the stabs to come in from GMK (who aren't the fastest at communication).

That way the ones who get who don't want to wait any longer get their boards sooner, and you don't have to sit around after QC just waiting for the stabs to come in.

More bookkeeping and logistics, splitting up units into more SKUs is another chunk of work.

Offering a hot fix is usually more work than it's cut out to be . We'll wait for gmk to reply to my urgent email.

[BAS1C]

How about an option for a $5 refund/store credit (or whatever amount you deem is fair) instead of waiting on the 2u stabilizers? To be honest, it's getting kinda exhausting keeping up with the numerous delays.

QC is the bigger part that is slowing everything down. I'm inspecting all of them 1 at a time to assure the quality of the board, anodization and more. And as far as delays go: customs, I got sick, and GMK didn't send me all the 2u stabs (which is also my fault since I didn't do an inventory check), but nonetheless, I can still QC all the boards.

I think i might be done with M65-A after this ; it's time to rest this weary soul.

Oh, I definitely understand it's more exhausting for you, which is why I suggested a simple store credit option for the ones who don't want to wait for the stabs to come in from GMK (who aren't the fastest at communication).

That way the ones who get who don't want to wait any longer get their boards sooner, and you don't have to sit around after QC just waiting for the stabs to come in.

More bookkeeping and logistics, splitting up units into more SKUs is another chunk of work.

 
Offering a hot fix is usually more work than it's cut out to be . We'll wait for gmk to reply to my urgent email.

What about a poll like you did with pcb upgrade? My order is willing to forego stabs as well if you decide to make this an option.

[evrydayzawrkday]

So.. I hate to be 'that guy' but did anyone elses tracking update? I was in the day 1 shipment but FedEx is throwing an error.

[TerryMathews]

So Jchan, if you have any extras that don't need sent back for reanodizing are you going to sell them "now", or hold them for the reanodizing boards to come back?

Just wondering if I should stop watching for extras for a while.

Extras will be sold only after I can do another inventory check after I finish shipping everyone who participated.

If you're on the keyclack mailing list or follow on Instagram, or browse rmk daily, you'll be fine with getting a notification or a heads up.

You should make an FAQ at the top of every page:

Q: Where is my M65?
A: I'm shipping them as fast as I can

Q: When will there be R2/Extras available for sale?
A: Sign up to the mailing list to be the first to know.

Q: Any announcements for R2?
A: After R1 is over.

Don't be a ****. "Will you sell some extras now and the rest later" had yet to be asked, because the topic of some boards needing refinishing had just been brought up.

Sorry you took it as a personal attack but considering how many times Jchan has to reply the same thing to questions, my suggestion stands.

If it wasn't directed at me, why did you feel the need to quote me?