Author Topic: [GB] M65-A | Made with RAMA.WORKS (Complete)  (Read 869773 times)

0 Members and 2 Guests are viewing this topic.

Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2150 on: Tue, 29 August 2017, 11:51:26 »
Patience is really a virtue. Not to mention all the GB disclaimers that are posted. Yall would be TOO upset if the Consistent GB runners, like Jchan just quit because of some of you whining about week extensions. Jchan has communicated and remained transparent. GB's though Keyclack have always been A1. When issues arise they were communicated.

I check the thread for shipping updates, but yall's incessant whining is killing the vibe of such a great GB. We should be discussing our plans for what looks to be a very rare KB.

Dear JCHAN: You are the bomb, keep your head up and know that a majority of us appreciate your work and diligence to get these products out to us.

Let me start by saying I agree with you. JChan is the bomb and I'm stoked for my keyboard to get here.  However, this isn't just a 1 or 2 week extension causing the salty-ness in here.  The original ship date was late June and it's almost September.  That is why people are getting upset and starting to ask for refunds.

Offline chuckdee

  • * Destiny Supporter
  • Posts: 1308
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2151 on: Tue, 29 August 2017, 11:54:48 »
Patience is really a virtue. Not to mention all the GB disclaimers that are posted. Yall would be TOO upset if the Consistent GB runners, like Jchan just quit because of some of you whining about week extensions. Jchan has communicated and remained transparent. GB's though Keyclack have always been A1. When issues arise they were communicated.

I check the thread for shipping updates, but yall's incessant whining is killing the vibe of such a great GB. We should be discussing our plans for what looks to be a very rare KB.

Dear JCHAN: You are the bomb, keep your head up and know that a majority of us appreciate your work and diligence to get these products out to us.

Let me start by saying I agree with you. JChan is the bomb and I'm stoked for my keyboard to get here.  However, this isn't just a 1 or 2 week extension causing the salty-ness in here.  The original ship date was late June and it's almost September.  That is why people are getting upset and starting to ask for refunds.

I'm actually glad at the refund requesting, considering no R2 :)  And more than happy to wait for a quality keyboard, especially when the delay is cause by family health issues.

Offline consolelog

  • Posts: 29
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2152 on: Tue, 29 August 2017, 12:02:37 »
Patience is really a virtue. Not to mention all the GB disclaimers that are posted. Yall would be TOO upset if the Consistent GB runners, like Jchan just quit because of some of you whining about week extensions. Jchan has communicated and remained transparent. GB's though Keyclack have always been A1. When issues arise they were communicated.

I check the thread for shipping updates, but yall's incessant whining is killing the vibe of such a great GB. We should be discussing our plans for what looks to be a very rare KB.

Dear JCHAN: You are the bomb, keep your head up and know that a majority of us appreciate your work and diligence to get these products out to us.


+1 . I come here for updates, not the whining.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2153 on: Tue, 29 August 2017, 12:06:29 »
Patience is really a virtue. Not to mention all the GB disclaimers that are posted. Yall would be TOO upset if the Consistent GB runners, like Jchan just quit because of some of you whining about week extensions. Jchan has communicated and remained transparent. GB's though Keyclack have always been A1. When issues arise they were communicated.

I check the thread for shipping updates, but yall's incessant whining is killing the vibe of such a great GB. We should be discussing our plans for what looks to be a very rare KB.

Dear JCHAN: You are the bomb, keep your head up and know that a majority of us appreciate your work and diligence to get these products out to us.


+1 . I come here for updates, not the whining.

++
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline robbles

  • Posts: 216
  • Location: Seattle, WA
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2154 on: Tue, 29 August 2017, 12:12:17 »
I'm here for THE PICS
How does one become so interested in a thing like keyboards? When you realize you use a keyboard more than any other tool in your life.

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 720
  • Location: US
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2155 on: Tue, 29 August 2017, 13:24:03 »
This thread is ****ing nuts and infuriating to read through, jesus christ.
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline Valaris

  • Posts: 156
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2156 on: Tue, 29 August 2017, 13:33:48 »
I bookmarked Jchan's post history page and just refresh that instead of checking this page over and over.

Offline SwordLaker

  • Posts: 47
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2157 on: Tue, 29 August 2017, 13:36:27 »
GB's though Keyclack have always been A1. When issues arise they were communicated.

As a participant, I duly disagree with this particular part.

The only update I received for GMK Muted was about the delay on GMK site, stating that GMK would ship everything out in early August (which they did fulfill). Email communication has ceased ever since. The thread, on the other hand, basically goes in a cycle:

  • Everything is quiet, and nothing happens.
  • Someone voices up and asks for an update.
  • JChan shows up, teases something, and promises something within the next few days.

The cycle repeats. Currently on cycle 3, since the initial deadline. I do see that part of these apply to the M65-A as well.

I'm not attacking on anyone. Just saying I disagree with part of the statement and why.

Edit: formatting.

Edit 2:

I bookmarked Jchan's post history page and just refresh that instead of checking this page over and over.

That's actually a good idea.

Offline jchan94

  • Keyclack Inc
  • * Moderator
  • Thread Starter
  • Posts: 1566
  • Location: Los Angeles
  • Please email jchan@keyclack.com. PMs are disabled
    • KeyClack
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2158 on: Tue, 29 August 2017, 13:50:26 »
Someone recently asked me, Joseph, why wait so long for a keyboard? Why don't I just buy one off Amazon and have it tomorrow?

I asked him, do you like driving the same Toyota Camry like everyone else? You gotta look into this car called Tesla 3. It was perhaps the greatest GB for a car ever.

Have a good day everyone. Been jamming to some New Found Glory at the office today.
Support Email: support@keyclack.com

Did you miss something from us?
- Sign up for our Mailing List: https://eepurl.com/coAJ5r

Offline jchan94

  • Keyclack Inc
  • * Moderator
  • Thread Starter
  • Posts: 1566
  • Location: Los Angeles
  • Please email jchan@keyclack.com. PMs are disabled
    • KeyClack
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2159 on: Tue, 29 August 2017, 13:59:30 »
Also, if you're here for Muted, can you reply to the Muted thread?

Currently, this thread is meant for m65a.
Support Email: support@keyclack.com

Did you miss something from us?
- Sign up for our Mailing List: https://eepurl.com/coAJ5r

Offline eksuen

  • Posts: 614
  • Location: Torgue Zone
  • Ambassador of explosions.
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2160 on: Tue, 29 August 2017, 14:04:02 »
Chiming in to help balance out perspectives since the vocal minority tends to make things looks worse than they are.

I am satisfied with how this GB is being run. Yes, the extra wait is not ideal, but I know what I signed up for. Keep on keeping on, jchan.

Offline duynguyenle

  • Posts: 1388
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2161 on: Tue, 29 August 2017, 14:04:26 »
I'm here for THE PICS

Why post a grainy phone picture when you can post a grainy graphics interchange format?



https://gfycat.com/GrayShallowDutchsmoushond
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline imprevade

  • Posts: 136
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2162 on: Tue, 29 August 2017, 14:53:26 »
Anyone else having problems with some of the RGBs, where they won't change hue/sat or on/off? (QMK PCB)

Offline Aznboi

  • Posts: 3
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2163 on: Tue, 29 August 2017, 18:26:44 »
has the majority of the Friday shipment been received?  I live relatively close to LA (central California) and my board's not here even after about a week and a half. :(

Offline jchan94

  • Keyclack Inc
  • * Moderator
  • Thread Starter
  • Posts: 1566
  • Location: Los Angeles
  • Please email jchan@keyclack.com. PMs are disabled
    • KeyClack
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2164 on: Tue, 29 August 2017, 18:58:24 »
has the majority of the Friday shipment been received?  I live relatively close to LA (central California) and my board's not here even after about a week and a half. :(

fedex arrived after hours, but they're coming tmr to pick it up

Also,

M65-A-077
M65-A-091
M65-A-0150
M65-A-0169
M65-A-0183
M65-A-0187
M65-A-0211
M65-A-0250
M65-A-0268
M65-A-0290
M65-A-0352
M65-A-0366
M65-A-0372
M65-A-0454
M65-A-0455
M65-A-0461
M65-A-0462
M65-A-0469
M65-A-0473
Support Email: support@keyclack.com

Did you miss something from us?
- Sign up for our Mailing List: https://eepurl.com/coAJ5r

Offline jjwax

  • Posts: 124
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2165 on: Tue, 29 August 2017, 18:59:30 »
Can we step back for a minute here, and talk about the real issue?

The fact that jchan didn't sort one of the shipping list days numerically?  I didn't join this GB to have my lists not be sorted properly!

EDIT: jchan, thank you for returning back to form with the recent shipping list!
« Last Edit: Tue, 29 August 2017, 19:01:10 by jjwax »

Offline Aznboi

  • Posts: 3
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2166 on: Tue, 29 August 2017, 19:06:25 »
has the majority of the Friday shipment been received?  I live relatively close to LA (central California) and my board's not here even after about a week and a half. :(

fedex arrived after hours, but they're coming tmr to pick it up

Also,

M65-A-077
M65-A-091
M65-A-0150
M65-A-0169
M65-A-0183
M65-A-0187
M65-A-0211
M65-A-0250
M65-A-0268
M65-A-0290
M65-A-0352
M65-A-0366
M65-A-0372
M65-A-0454
M65-A-0455
M65-A-0461
M65-A-0462
M65-A-0469
M65-A-0473

Sorry, let me rephrase.  I meant that my board already shipped with the August 18th/19th "wave", yet I've seen people on this thread who live much further away with their boards from the same shipment. 

Regardless, good to see that things are moving along.

Offline jchan94

  • Keyclack Inc
  • * Moderator
  • Thread Starter
  • Posts: 1566
  • Location: Los Angeles
  • Please email jchan@keyclack.com. PMs are disabled
    • KeyClack
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2167 on: Tue, 29 August 2017, 19:10:21 »
has the majority of the Friday shipment been received?  I live relatively close to LA (central California) and my board's not here even after about a week and a half. :(

fedex arrived after hours, but they're coming tmr to pick it up

Also,

M65-A-077
M65-A-091
M65-A-0150
M65-A-0169
M65-A-0183
M65-A-0187
M65-A-0211
M65-A-0250
M65-A-0268
M65-A-0290
M65-A-0352
M65-A-0366
M65-A-0372
M65-A-0454
M65-A-0455
M65-A-0461
M65-A-0462
M65-A-0469
M65-A-0473

Sorry, let me rephrase.  I meant that my board already shipped with the August 18th/19th "wave", yet I've seen people on this thread who live much further away with their boards from the same shipment. 

Regardless, good to see that things are moving along.

can ya email me? I actually don't know your order number. support@keyclack.com

Also, something to take note of: shipping doesn't really matter based on distance. It's section based. I just packed someone's order from Oregon, but that will take 5 days to get to them, vs someone in Seattle, which says 3 days. It matters on where you live in that area, and how big the shipping infrastructure is there, or how remote you are from the big shipping depo.
Support Email: support@keyclack.com

Did you miss something from us?
- Sign up for our Mailing List: https://eepurl.com/coAJ5r

Offline Potatoes

  • Posts: 63
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2168 on: Tue, 29 August 2017, 19:58:37 »
I am a chosen one!




See how quickly it takes to get to Vegas. I don't even have a keyset for it, yet, anyway...

Offline jchan94

  • Keyclack Inc
  • * Moderator
  • Thread Starter
  • Posts: 1566
  • Location: Los Angeles
  • Please email jchan@keyclack.com. PMs are disabled
    • KeyClack
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2169 on: Tue, 29 August 2017, 20:06:51 »
I am a chosen one!

Show Image



See how quickly it takes to get to Vegas. I don't even have a keyset for it, yet, anyway...

Support Email: support@keyclack.com

Did you miss something from us?
- Sign up for our Mailing List: https://eepurl.com/coAJ5r

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2170 on: Tue, 29 August 2017, 20:33:12 »
I am a chosen one!

Show Image



See how quickly it takes to get to Vegas. I don't even have a keyset for it, yet, anyway...

Show Image


 :-*
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline robbles

  • Posts: 216
  • Location: Seattle, WA
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2171 on: Tue, 29 August 2017, 20:34:09 »
I'm here for THE PICS

Why post a grainy phone picture when you can post a grainy graphics interchange format?

Show Image


https://gfycat.com/GrayShallowDutchsmoushond

God I love that colorful butt.
How does one become so interested in a thing like keyboards? When you realize you use a keyboard more than any other tool in your life.

Offline msilvv

  • Posts: 36
  • Location: Maryland
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2172 on: Tue, 29 August 2017, 23:08:13 »
Aahh!! Glad to see we're back into the 100s again. Hopefully mine will ship soonso I can have a beautiful board to take back to school with me! Keep up the hard work JChan, we appreciate it!

Sent from my VS986 using Tapatalk


Offline KINGPIN

  • Posts: 59
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2173 on: Wed, 30 August 2017, 00:23:23 »
Well **** me, still haven't shipped my 111 yet :(
Levia Makes

Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2174 on: Wed, 30 August 2017, 12:04:55 »
Well **** me, still haven't shipped my 111 yet :(

Same here.  Maybe today is the day for both of us though!

Offline KINGPIN

  • Posts: 59
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2175 on: Wed, 30 August 2017, 15:10:09 »
Well **** me, still haven't shipped my 111 yet :(

Same here.  Maybe today is the day for both of us though!
Yeah, hopefully. My family is starving;_>;
Levia Makes

Offline forevermadrigal

  • Posts: 663
  • Location: In between myself
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2176 on: Thu, 31 August 2017, 07:06:15 »
Did anyone have problems with their nylon piece? Mine isn't flush and one of the side screw holes doesn't line up

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2177 on: Thu, 31 August 2017, 08:50:19 »
Did anyone have problems with their nylon piece? Mine isn't flush and one of the side screw holes doesn't line up
It's pretty tight, did you try pressing a bit harder?

Offline forevermadrigal

  • Posts: 663
  • Location: In between myself
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2178 on: Thu, 31 August 2017, 14:20:14 »
Did anyone have problems with their nylon piece? Mine isn't flush and one of the side screw holes doesn't line up
It's pretty tight, did you try pressing a bit harder?

Yep, one side is flush while the other isn't. Well, just the bottom screw isn't.

Offline shengpizi

  • Posts: 8
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2179 on: Fri, 01 September 2017, 04:26:18 »
Could I ask for a slot if anyone wanna refund? I'd only take Champagne or HydroBlue, better with Alu base.

Offline Oblotzky

  • Posts: 2049
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2180 on: Fri, 01 September 2017, 04:41:53 »
Could I ask for a slot if anyone wanna refund? I'd only take Champagne or HydroBlue, better with Alu base.

All refunded orders go into retail inventory

Offline Aesomatica

  • Posts: 32
  • Location: FL, US
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2181 on: Fri, 01 September 2017, 09:02:45 »
Respectfully request an update, hope everything is going well on the homefront and the keebfront!

Offline BAS1C

  • Posts: 443
  • Location: Calgary, AB
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2182 on: Fri, 01 September 2017, 09:05:51 »
Did anyone have problems with their nylon piece? Mine isn't flush and one of the side screw holes doesn't line up

They are tight, can confirm. Mine isn't 100% lined up it seems, but push harder. I pushed hard af, and it got lined up enough to get the two screws in. Hopefully works for ya mate.


Offline forevermadrigal

  • Posts: 663
  • Location: In between myself
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2183 on: Fri, 01 September 2017, 11:41:33 »
Did anyone have problems with their nylon piece? Mine isn't flush and one of the side screw holes doesn't line up

They are tight, can confirm. Mine isn't 100% lined up it seems, but push harder. I pushed hard af, and it got lined up enough to get the two screws in. Hopefully works for ya mate.

Got it fixed last night. Thanks dude

Offline shengpizi

  • Posts: 8
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2184 on: Fri, 01 September 2017, 20:11:12 »
Could I ask for a slot if anyone wanna refund? I'd only take Champagne or HydroBlue, better with Alu base.

All refunded orders go into retail inventory

Thx for the info!

Offline therealmckellar

  • Posts: 29
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2185 on: Sat, 02 September 2017, 11:23:39 »
Could I ask for a slot if anyone wanna refund? I'd only take Champagne or HydroBlue, better with Alu base.
Some of us have asked. People would rather just take their refund than sell theirs for some bizarre reason

Sent from my Pixel using Tapatalk


Offline Valaris

  • Posts: 156
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2186 on: Sat, 02 September 2017, 14:35:45 »
Could I ask for a slot if anyone wanna refund? I'd only take Champagne or HydroBlue, better with Alu base.
Some of us have asked. People would rather just take their refund than sell theirs for some bizarre reason

Sent from my Pixel using Tapatalk

Well the reason some people opted for the refund was they couldn't wait anymore/didn't want to wait/needed the money now. Getting a refund now=money now. Waiting till it ships, arrives, and then selling it would mean waiting potentially a while longer for the cash. And it's way too much of a pain in the ass for Jchan to deal with the logistics of people selling their slots.

Offline therealmckellar

  • Posts: 29
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2187 on: Sat, 02 September 2017, 15:12:58 »
Could I ask for a slot if anyone wanna refund? I'd only take Champagne or HydroBlue, better with Alu base.
Some of us have asked. People would rather just take their refund than sell theirs for some bizarre reason

Sent from my Pixel using Tapatalk

Well the reason some people opted for the refund was they couldn't wait anymore/didn't want to wait/needed the money now. Getting a refund now=money now. Waiting till it ships, arrives, and then selling it would mean waiting potentially a while longer for the cash. And it's way too much of a pain in the ass for Jchan to deal with the logistics of people selling their slots.
I pay you now you forward me the board when it arrives.

Sent from my Pixel using Tapatalk


Offline Valaris

  • Posts: 156
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2188 on: Sat, 02 September 2017, 15:31:29 »
But then you still gotta deal with the waiting. Much easier to just say screw it and get a refund. It's what I would do. But won't of course, I'd much rather have the keyboard.

Offline TelFiRE

  • Posts: 195
  • Location: Littleton, CO
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2189 on: Sat, 02 September 2017, 15:59:50 »
Jchan stay sane man. There are a lot of people who think you're awesome and really appreciate what you do. <3

But then you still gotta deal with the waiting. Much easier to just say screw it and get a refund. It's what I would do. But won't of course, I'd much rather have the keyboard.

But... waiting for what?
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline Atredl

  • Posts: 805
  • Location: SoCal
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2190 on: Sat, 02 September 2017, 16:51:56 »
Jchan stay sane man. There are a lot of people who think you're awesome and really appreciate what you do. <3

But then you still gotta deal with the waiting. Much easier to just say screw it and get a refund. It's what I would do. But won't of course, I'd much rather have the keyboard.

But... waiting for what?
Waiting for the board to arrive and then send it to the person who bought it from you. It's an extra step and makes for a more complicated situation. Or they can get a refund and be done with it immediately.

Offline panzermuffin

  • Posts: 11
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2191 on: Sun, 03 September 2017, 13:42:43 »
How likely is it that one can acquire a matte black one? I just love this design.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2192 on: Sun, 03 September 2017, 15:40:56 »
How likely is it that one can acquire a matte black one? I just love this design.

Ask when he announces the extras sale.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline jjwax

  • Posts: 124
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2193 on: Mon, 04 September 2017, 11:53:47 »
Fingers crossed I make this week's shipping cut!

In the meantime....can we get some more pics of boards, plz

Offline OfTheWild

  • * Esteemed Elder
  • Posts: 1308
  • Location: Cary, NC
  • Make things. Have fun.
    • Studios of the Wild
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2194 on: Tue, 05 September 2017, 00:29:06 »
come on #236! big money, no whammies!
-Dana

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4180
  • Location: Tennessee - USA
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2195 on: Tue, 05 September 2017, 07:40:40 »
come on #175! big money, no whammies!

FTFY

Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2196 on: Tue, 05 September 2017, 10:08:22 »
Is JChan still alive? No shipping updates in almost a week.  :(

Offline chuckdee

  • * Destiny Supporter
  • Posts: 1308
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2197 on: Tue, 05 September 2017, 10:58:56 »

Offline petrock

  • Posts: 35
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2198 on: Tue, 05 September 2017, 11:09:29 »
Is JChan still alive?

Overreaction much?

Eh, I mean he hasn't posted in the muted thread in a week either. I don't think there is any fear of his death as he has posted in the Budapest thread, but asking if there has been any progress isn't unwarranted. Sure its not the most diplomatic wording, but its something.

I mean I sent him an email last week as my M65 was included in the shipment on August 3rd and there has been no update to the Fedex tracking. I haven't gotten a response either and to be honest I am worried that Fedex lost it somewhere between Jchan and Fedex in Cali.
« Last Edit: Tue, 05 September 2017, 11:11:18 by petrock »

Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2199 on: Tue, 05 September 2017, 11:14:22 »
Is JChan still alive?

Overreaction much?

Eh, I mean he hasn't posted in the muted thread in a week either. I don't think there is any fear of his death as he has posted in the Budapest thread, but asking if there has been any progress isn't unwarranted. Sure its not the most diplomatic wording, but its something.

I mean I sent him an email last week as my M65 was included in the shipment on August 3rd and there has been no update to the Fedex tracking. I haven't gotten a response either and to be honest I am worried that Fedex lost it somewhere between Jchan and Fedex in Cali.

It was more just an exaggeration.  Not actually asking if he's dead.