[GB] [Round 1 done] ISO & ANSI 60% mountplates

[LeandreN]

For those who are ordering both? Is there a specific reason?

I'm getting both because I own keycaps for both layouts and I'm eager to try the ANSI as I've only used ISO (IT) so far.
I could say, it's for sake of testing.

That is cool!

[LeandreN]

1 more order from Australia! 10 more to tip!

[Giorgio]

Am I not allowed to express an opinion about your product?
Because the answer that you just gave can be applied to any opinion expressed here.

I prefer stability to compatibility

Yes, you do, but this GB is not only for you.

[LeandreN]

Am I not allowed to express an opinion about your product?
Because the answer that you just gave can be applied to any opinion expressed here.

I prefer stability to compatibility

Yes, you do, but this GB is not only for you.

Yes you can. Sorry about my answer. English isn't my first language so I didn't try to mock on you.

Great point, but as of this point, I cannot do such a major change to the design, but I will bring it with me for further reference.

[Giorgio]

Thanks for taking my opinion into consideration

Am I not allowed to express an opinion about your product?
Because the answer that you just gave can be applied to any opinion expressed here.

I prefer stability to compatibility

Yes, you do, but this GB is not only for you.

Yes you can. Sorry about my answer. English isn't my first language so I didn't try to mock on you.

Great point, but as of this point, I cannot do such a major change to the design, but I will bring it with me for further reference.

[primered6]

Ordered 2 plates. One ANSI, one ISO.

Awesome GB. 

Thanks!
For those who are ordering both? Is there a specific reason?

Yeah I usually use UK ISO but I want to get a bit more into ANSI, though they moderately cheap so why not both? 

[CPTBadAss]

So these plates have been tested with Alps?

[LeandreN]

So these plates have been tested with Alps?

With ONE Apple extended switch, yes.

[LeandreN]

Ordered 2 plates. One ANSI, one ISO.

Awesome GB. 

Thanks!
For those who are ordering both? Is there a specific reason?

Yeah I usually use UK ISO but I want to get a bit more into ANSI, though they moderately cheap so why not both? 

Sounds awesome

[3K]

If this drop is sucessful, will there be more in the future? I'm thinking about designs like 40% boards and such.

Also you're doing some good work on here! Greets from germany.

[LeandreN]

If this drop is sucessful, will there be more in the future? I'm thinking about designs like 40% boards and such.

Also you're doing some good work on here! Greets from germany.

Maybe, I dont know yet

Thanks!

[LeandreN]

Updated the OP to make it clearer.
Today i have filled out custom forms so everything should be ready when the plates arrive. I have also all the packing material ready. This is to minimize the time for you.

Now, what i want you to do, is to tell your friends to place their order so we can tip that 50 mark! Only 10 plates more.

[jdcarpe]

I use 2.5mm radius on the corners of my plates.

[LeandreN]

I use 2.5mm radius on the corners of my plates.

Do I get a copyright infringement if I choose 2,5mm or should I go with 2,4?

Jk.

[LeandreN]

2,5 is the final rounded corners if no one has an input.

The order has been staying on 40 for a while now. If we are gonna tip, you need to invite your friends to buy

[faxe]

Spent some time on pexonpcs.co.uk yesterday, thinking about ordering the 60% case. Decided to order tomorow. Went back 5 minutes ago, sold out  . Now where do I get a 60% case?

[LeandreN]

Spent some time on pexonpcs.co.uk yesterday, thinking about ordering the 60% case. Decided to order tomorow. Went back 5 minutes ago, sold out  . Now where do I get a 60% case?

Grab this fast:
http://pexonpcs.co.uk/products/b-stock-items

Some aesthetics flaws, but i think you will be fine

[faxe]

Done, thanks for the tip!

[LeandreN]

Done, thanks for the tip!

No problem : )

[LeandreN]

We are at 41! 9 more people now

[flabbergast]

Spent some time on pexonpcs.co.uk yesterday, thinking about ordering the 60% case. Decided to order tomorow. Went back 5 minutes ago, sold out  . Now where do I get a 60% case?

Yea, I got the last one last night. Sorry! I guess this group buy is helping pexon as well...

[LeandreN]

Spent some time on pexonpcs.co.uk yesterday, thinking about ordering the 60% case. Decided to order tomorow. Went back 5 minutes ago, sold out  . Now where do I get a 60% case?

Yea, I got the last one last night. Sorry! I guess this group buy is helping pexon as well...

Pexon is a friend so go on and support him

[TalkingTree]

Grab this fast:
http://pexonpcs.co.uk/products/b-stock-items

Some aesthetics flaws, but i think you will be fine

Flawed items resemble me greatly so I bought one, thanks for the hint.

[LeandreN]

Grab this fast:
http://pexonpcs.co.uk/products/b-stock-items

Some aesthetics flaws, but i think you will be fine

Flawed items resemble me greatly so I bought one, thanks for the hint.

Lel. They're gonna go fast.

[LeandreN]

I will start invoicing today. I will also set the invoice deadline to Monday night, i will make a countdown, orders will be open to monday morning. I know this is short time, but i want to get it to you as quickly as possible.

[LeandreN]

Already got 5 payments after just some seconds. ca 20 to go!
THANK YOU SO MUCH! The faster you pay, the faster i can start production

[TalkingTree]

Thanks for taking charge of 10 plates for yourself, that made me save €6.

[LeandreN]

Thanks for taking charge of 10 plates for yourself, that made me save €6.

No problem

I hope everyones invoice was right, i did it in a bit of a hurry.

[LeandreN]

Thanks for all the payments. If i get 2 more today i will be able to start the production tomorrow and get it fast to you Please pay as fast as possible !

[mashby]

Ordered 1 ISO plate.

[LeandreN]

Ordered 1 ISO plate.

Awesome, thanks for the little note

Invoiced you.

[mashby]

Paid. 

[LeandreN]

Paid. 

Got it! Thanks!

[Defying]

paid. 

[LeandreN]

paid. 

Awesome! Thanks.

[honoka]

Sorry if it has been asked but im too tired to read through the thread. Is this compatible with poker 2 and the original case? Hugs

[LeandreN]

Sorry if it has been asked but im too tired to read through the thread. Is this compatible with poker 2 and the original case? Hugs

Yes

[CPTBadAss]

Went to order, saw the discount code field. What's up with that?

[LeandreN]

Went to order, saw the discount code field. What's up with that?

I havent used it for something yet. If someone wanted to trade or i owned someone something, i would pay for their plate.

TLDR: Useless.

[LeandreN]

Hey!

If someone plans to order, please do it as soon as possible. I will order the plates tomorrow(hopefully) and i don't want to but to many or to less.

[quochung1989]

Paid.

[LeandreN]

Paid.

Thanks, quochung

[Fire Brand]

Paid for mine

[Paranoid]

Wow wow wow hold on! Time to place an order! Thank Jebus I checked this thread today.
In for two of each my good man!

[LeandreN]

Wow wow wow hold on! Time to place an order! Thank Jebus I checked this thread today.
In for two of each my good man!

Thanks. Talking with my supplier tomorrow or monday to start production

[LeandreN]

Paid for mine

Super!

[LeandreN]

Will contact supplier today or monday

[LeandreN]

THE GATERON WINNER IS CHOSEN!

SPOILER ALERT:

More

https://www.youtube.com/watch?v=Qz5jbTqsF_Q

[RavenII]

Fit [ ✔ by me, Cherry switches are a little lose, you may want to glue. Kailh and Gaterons fits perfectly. Combatible with ALPS(not Alps stabs)]

Do the cherry switches pop out of the plate when you pull a keycap?

In most cases, yes :-/

There are some exceptions. They will only pull out of the plate if you really force it on a really short period of time. Gaterons and Kailhs are stuck in the plate.

So Gaterons fit tightly? I'm hesitant to put in an order, I don't want to have to glue them or anything...

[LeandreN]

Fit [ ✔ by me, Cherry switches are a little lose, you may want to glue. Kailh and Gaterons fits perfectly. Combatible with ALPS(not Alps stabs)]

Do the cherry switches pop out of the plate when you pull a keycap?

In most cases, yes :-/

There are some exceptions. They will only pull out of the plate if you really force it on a really short period of time. Gaterons and Kailhs are stuck in the plate.

So Gaterons fit tightly? I'm hesitant to put in an order, I don't want to have to glue them or anything...

As you see under "features" they are kind of lose. They won't come of by themselves, but if you drag of a keycap, they may come of.