geekhack

geekhack Marketplace => Interest Checks => Topic started by: Jae-3soteric on Mon, 20 July 2020, 13:09:14

Title: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Mon, 20 July 2020, 13:09:14
Updates

- Added dates and prices for GB
- Red pantone has changed to a RAL after samples from the Manu - RAL 3005 Pics below
- Added 6u and split spacebar options to PCB but not plates


J-01 Rev 1 Limited Edition Raffle (20 public spots) goes live at 8pm UK time on Saturday 29th August (3pm EST, Noon PST) https://time.is/London

Form will be posted here and on discord/Reddit and will be open for 24 hours - winners will be drawn at random and invoiced on Monday 31st August

FORM LINK (will be live at 8pm UK Time Saturday 29th) https://time.is/London

------


The J-01 Rev1 is the next revision in the series of boards. Historically there has been a prototype of the J-01 back in late 2017 and a small run of the same prototype in early 2019.

Since then the board has been back on the drawing board / butchers block to improve the board and I now feel like it’s ready for a more public outing via a Group Buy. Disclaimer up front, I fully appreciate that this board is not for everyone, and some people will enjoy its features, whilst others won’t; but I’m hoping that the people who do like its design will appreciate me bringing it to the community.

(https://imgur.com/PcX25mz.png)


Changelog (changes from the original J-01 to rev1):
   All these changes were based on feedback from the prototype round and further experimentation with the J-01 and J-02, as well as marking a natural transition.



Design Philosophy:

The design is based around the principle of allowing sound development within the case, through the use of a carefully designed acoustic cavity, but with enough mass and dampening (via fully isolating gaskets) to ensure a clean and crisp note.

Visually the design is a modern take on vintage keyboards, specifically inspired by the pen rail on a Model M, and the Macro keys seen on the vintage Commodore boards – but in a more current style. This leads to chunky bezels, solid pen rail, and reduced base with the majority of the mass under the Alpha keys to improve sound. Grey base and accent pen rail to accentuate the main body, without drowning it out. The front lip and side profile is designed to give the board a look of one that is floating, without drawing the eye. Optional Brass pen rail to add a touch of elegance.

(https://imgur.com/yAxN0ZW.png)


Prototype:

A prototype is on hand and requires only minor amends that wont impact the quality of the board. This includes revised plates, PCBs and Gaskets. You can review the build stream for the board here and pictures later in this thread: (as of 20/07 @19:00 UK time the VoD is still uploading...)

https://www.youtube.com/watch?v=Wc9QYnwFgiA


Colours/Options:

   Case Material -  Aluminium

   Case Colours:

Here are the colour samples:
Red (on the Isla Prototype)
(https://imgur.com/bdoAERx.png)


Blue (on the Allison Prototype)
(https://imgur.com/vU2bbS2.png)


   Plate Options:
   PCB/Hardware:


Layouts:

   - PCB:
(https://imgur.com/lAttvuG.png)

   - Fixed ANSI Plate
(https://imgur.com/U6wZgat.png)

   - Fixed ISO Plate
(https://imgur.com/7sBOxib.png)



GB Details:

Ok so J-01 Rev 1 Updates on Prices and dates... All USD prices are approximates as the boards will be listed in GBP but should convert roughly to the prices noted

Dates first:

 - Limited Edition Raffle - Opens 29th August for 24 hours. Winners Drawn and invoiced on 31st August - 72 hours to pay.

 - Standard Edition - FCFS @ prototypist.net 5th September - 200 units. If all units sell silly quick - 50 more 24 hours later (y'all seem hungry enough for this)


Prices:

- Limited Edition (all e-white, brass pen rail) = £445 / $590

- Standard edition (3 colour options, grey base, grey pen rail) = £390 / $510

- Extras - PCB = £30 / $40, Plates (CF or FR4) = £27-35 / $35-45, Brass pen rail = £55 / $70, Grey pen rail = £40 / $50

All boards come with:
- Top Case
- Bottom Case
- Pen Rail (alu for standard, brass for Limited)
- Hard Carry Case
- Triple Layer Gaskets
- CF plate (ISO or ANSI)
- Hardware
- PCB
- Daughterboard (and JST)


Once you purchase FCFS you'll get an email with a form to complete your preferences for colour choices and 10 key macro or 8+logo etc. If this is not completed within 48 hours *I'll pick for you*

Shipping is whatever shipping is - DHL calculate it automagically - that being said if you buy and it seems crazy high def get in touch to discuss.

EU folks - these are the prices without VAT - if you have an EU address VAT will be applied on top at 20% automatically at checkout





Pictures: Pictures of the prototype built on stream on Sunday 19th July

(https://imgur.com/7F1QGy7.png)

(https://imgur.com/UY8ARCw.png)

(https://imgur.com/ivdvV6S.png)

(https://imgur.com/zFWdJGy.png)



Renders: (please note these are renders only, final colours may differ from these and will be close to the pantones noted above, please bear this in mind.

By Nathan Alphaman:

3 Colours avail
(https://imgur.com/PcX25mz.png)

Red with Brass pen rail and logo top
(https://imgur.com/9JPoLPZ.png)

Red with Grey pen rail and 10 key macro top
(https://imgur.com/mE9gKJm.png)

Blue with Grey pen rail and logo top
(https://imgur.com/eywc117.png)

Blue with Brass pen rail and 10 key macro top
(https://imgur.com/r7Oty1z.png)

Black with Grey pen rail and logo top
(https://imgur.com/YA2HQZm.png)

Black with Brass pen rail and 10 key macro top
(https://imgur.com/TXwXdmX.png)

E-White Limited Edition with Logo Top
(https://imgur.com/ihVGgvp.png)

E-White Limited edition with 10 key macro top
(https://imgur.com/etILuQD.png)


By FLX:

Tease 1
(https://imgur.com/82qZkbe.png)

Tease 2
(https://imgur.com/xuhjZvB.png)

Tease 3
(https://imgur.com/AV8N4j2.png)

Scene 1
(https://imgur.com/uIisEb7.png)

Scene 2
(https://imgur.com/USfwu2y.png)




Thanks:

   - James (AKB for CAD design and works, plus listening to me drone on for hours)
   - Flex for the PCB re-design and production and renders
   - Nathan Alphaman for some stunning renders
        - Everyone who has shown interest in the board and convinced me to share it wider than just the proto run.



FAQ:

Q: Will you add X colour
A: No – the colours are finalised, although a few people have asked for specific colourways as a commission post the GB being successful

Q: Will you add X layout support
A: Most likely not, the PCB supports more than the plates will support already and all plate files will be open

Q: Will you do an unlimited GB
A: No

Q: Can I have Render files?
A: Yes – these will be posted publicly on Prototypist.net prior to the GB

Q: Hotswap?
A: No

Q: Discord server for updates?
A: sure https://discord.gg/qm944aC although all updates will be posted here as well
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Mon, 20 July 2020, 13:09:37
reserved
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Penguindropings on Mon, 20 July 2020, 13:10:58
Take my money.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Rew23 on Mon, 20 July 2020, 13:11:12
Been waiting for this since i saw the original J-01. Absolutely gorgeous. Really hope i can snag one. That blue with with the grey pen rail, yes please!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: cowsareverywhere on Mon, 20 July 2020, 13:11:47
I don't see a buy it now button anywhere!!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: LeandreN on Mon, 20 July 2020, 13:11:58
Good luck!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: d4vid4f on Mon, 20 July 2020, 13:12:08
Love it!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Zeelobby on Mon, 20 July 2020, 13:13:34
Here we go! Very nice iteration on a classic.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Helpingly on Mon, 20 July 2020, 13:15:00
Yep, gonna need me one of these. Got in the J-02 GB to fill my heart, but this is the board that convinced me to join that, so of course I'm gonna need this too.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: yoot on Mon, 20 July 2020, 13:15:04
Oh baby!

Sent from my Pixel 3 XL using Tapatalk

Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: JDMFanatic on Mon, 20 July 2020, 13:15:06
Thirsting for one of these in black or white with the brass pen rail!!!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: beekey on Mon, 20 July 2020, 13:15:20
First J-02, then J-01. You have to do a J-00. Otherwise my series will be broken.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: MadaMada21 on Mon, 20 July 2020, 13:15:49
Love it, too excited!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: FireLock on Mon, 20 July 2020, 13:15:56
Yes finally! Let's go!!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: kimchijody on Mon, 20 July 2020, 13:17:01
FINALLY
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: wt1155 on Mon, 20 July 2020, 13:17:32
Nice so hyped for this, I hope I can get my hand on them
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Coody on Mon, 20 July 2020, 13:18:50
Interest has been checked. Reserve e-white with brass plz :thumb:
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: SomethingGifted on Mon, 20 July 2020, 13:20:11
Very nice! One question, will we be able to purchase an extra PCB?
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: fatboycarney on Mon, 20 July 2020, 13:21:15
Amazing!!  :thumb:  :eek: This layout is perfection!!!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: KaosJ on Mon, 20 July 2020, 13:22:01
Definetely in on the white one  :thumb:
The logo bothered me  so i appreciate a lot the 10 macro-key version. 
There is any chance for a brass plate? I basically don't like plastic
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Mr Jiggles on Mon, 20 July 2020, 13:22:26
Love the pen rail. I wish more keyboards had them.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Scottw on Mon, 20 July 2020, 13:23:39
I watched the stream yesterday. The board looks spectacular. Anyone reading this, if you have an hour or so, checkout the stream. The attention to detail and subtle changes from the original to Rev 1 are really nice.

Actually, scratch that. I will make it much harder for me to get one. :P
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: i luv chuletas on Mon, 20 July 2020, 13:23:43
Yes.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Kyosurai on Mon, 20 July 2020, 13:26:32
Good luck, and now I need a loan haha.. looks gooood
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: dlavelle94 on Mon, 20 July 2020, 13:27:11
YES IN
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: eyedrop on Mon, 20 July 2020, 13:28:22
Finally made it to IC phase.  I have been following along and I love the layout.  Hopefully I will be able to put one on my desk soon!   :thumb:
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Alick01 on Mon, 20 July 2020, 13:28:56
Just created an Account to say how hyped I am about this board.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: omegarex555 on Mon, 20 July 2020, 13:30:18
Damn it is so beautiful I NEED IT
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: soloplayer on Mon, 20 July 2020, 13:31:46
sadly the middle weight is gone.i think it was what made this board unique :(
anyway can you compare the weight before and after removing the weight?
i suggest you could add an option for brass pen rail as upgradable, not extra only
still, my wallet is ready!!!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: JSaintS on Mon, 20 July 2020, 13:33:48
This is gorgeous! Can’t wait for the GB!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: LnrdOrtz on Mon, 20 July 2020, 13:34:10
In for one for sure! Hype!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: oscdawg on Mon, 20 July 2020, 13:36:48
Is there a discord for updates on this one?
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Sabin on Mon, 20 July 2020, 13:43:13
Omg its happening. Beautiful. Would love to get one if 10 key macro
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: ilikerustoo on Mon, 20 July 2020, 13:45:30
I'm in

Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Kill on Mon, 20 July 2020, 13:46:11
Been waiting for this Jae looks amazing can't wait for GB!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: dmatx1 on Mon, 20 July 2020, 13:52:34
Quote from: oscdawg on Mon, 20 July 2020, 13:36:48
Is there a discord for updates on this one?

https://discord.com/invite/qm944aC (https://discord.com/invite/qm944aC)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: guybrush on Mon, 20 July 2020, 13:53:02
Yeah I'd be in. 8-key macro, brass pen rail. Amazing.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: hottrout on Mon, 20 July 2020, 13:54:34
SOLD, Black with brass please just like the original.  Oh how my heart has waited for this to go live.  :eek: :eek: :eek: ;D ;D :D :D :thumb: :thumb: :thumb:
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: paqji on Mon, 20 July 2020, 13:58:07
a few months back i foolishly spent weeks searching for one, i am so happy to see it's back and fresher than ever
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: vaf1en on Mon, 20 July 2020, 13:58:50
Crank up that 'number of units' because demand is here! :)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: ZyBeR on Mon, 20 July 2020, 13:59:39
GB of the year!! Looks fabulous, can't wait to join in :)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: damagepoint on Mon, 20 July 2020, 14:02:19
Hellll yea I hope I can get in this
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: dmatx1 on Mon, 20 July 2020, 14:02:52
Quote from: paqji on Mon, 20 July 2020, 13:58:07
a few months back i foolishly spent weeks searching for one, i am so happy to see it's back and fresher than ever

So far none of the OG J-01s are sold, all of them are at their original owners.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: grundlemere on Mon, 20 July 2020, 14:04:44
While the elusive 60 that I want remains just out of my reach, I think I’ll just have to bite on this because I can’t wait until J-02 r2 to own one of your boards. I specifically avoided a current GB *ahem* to save for this one. Thrilled it’s coming so soon!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: czarjon on Mon, 20 July 2020, 14:06:16
YES! For sure interested!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Mon, 20 July 2020, 14:20:05
Quote from: Rew23 on Mon, 20 July 2020, 13:11:12
Been waiting for this since i saw the original J-01. Absolutely gorgeous. Really hope i can snag one. That blue with with the grey pen rail, yes please!

Thanks for the support!!

Quote from: Scottw on Mon, 20 July 2020, 13:23:39
I watched the stream yesterday. The board looks spectacular. Anyone reading this, if you have an hour or so, checkout the stream. The attention to detail and subtle changes from the original to Rev 1 are really nice.

Actually, scratch that. I will make it much harder for me to get one. :P

I'm hoping it wont be a struggle for anyone. I really want to set the number of units right for this one.

Quote from: SomethingGifted on Mon, 20 July 2020, 13:20:11
Very nice! One question, will we be able to purchase an extra PCB?
Yes - extra PCBs will be avail

Quote from: dmatx1 on Mon, 20 July 2020, 14:02:52
Quote from: paqji on Mon, 20 July 2020, 13:58:07
a few months back i foolishly spent weeks searching for one, i am so happy to see it's back and fresher than ever

So far none of the OG J-01s are sold, all of them are at their original owners.

I'm really thankful for that - the OG J-01 owners are a rare bunch

Quote from: KaosJ on Mon, 20 July 2020, 13:22:01
Definetely in on the white one  :thumb:
The logo bothered me  so i appreciate a lot the 10 macro-key version. 
There is any chance for a brass plate? I basically don't like plastic

Quite a few people fancied a no-logo version :D If there is enough interest I'll offer other plates; but the files will be open either way.

Quote from: soloplayer on Mon, 20 July 2020, 13:31:46
sadly the middle weight is gone.i think it was what made this board unique :(
anyway can you compare the weight before and after removing the weight?
i suggest you could add an option for brass pen rail as upgradable, not extra only
still, my wallet is ready!!!

Sorry, but it made the board silly heavy, more expensive and sound worse :(

I'll look at making the brass pen rail an upgrade vs an addon before the GB

Quote from: Mr Jiggles on Mon, 20 July 2020, 13:22:26
Love the pen rail. I wish more keyboards had them.

Me too - huge fan of em

Quote from: grundlemere on Mon, 20 July 2020, 14:04:44
While the elusive 60 that I want remains just out of my reach, I think I’ll just have to bite on this because I can’t wait until J-02 r2 to own one of your boards. I specifically avoided a current GB *ahem* to save for this one. Thrilled it’s coming so soon!

Awww bless! J-02 r2 is not a definite I'm afraid...

Quote from: Alick01 on Mon, 20 July 2020, 13:28:56
Just created an Account to say how hyped I am about this board.

Thank you! A true pleasure to have you in the community!

Quote from: oscdawg on Mon, 20 July 2020, 13:36:48
Is there a discord for updates on this one?

Yes, I added it to the OP but its here too : https://discord.gg/qm944aC
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Kubyneetees on Mon, 20 July 2020, 14:22:55
IN. Need that E-White  :cool:
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Llamakob on Mon, 20 July 2020, 14:26:40
Nice, hopefully I can snag one GL with the GB
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: mattv on Mon, 20 July 2020, 14:29:43
Nice! Hopefully able to snag a blue with the silver pen rail or white with the brass penrail.  What do you mean by the white being limited?  Very low # of e-white will be available?
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: hkiri on Mon, 20 July 2020, 14:33:11
Depending on the price you can count me in!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Macmutant on Mon, 20 July 2020, 14:40:30
Congrats on this beautifully refined design, Jae. I’m very excited and anxious to join.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: eyedrop on Mon, 20 July 2020, 14:53:33
Jae, why are the two bottom keys of the macro keys on the layout marked red?  Just curious.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: eskimojo on Mon, 20 July 2020, 14:59:53
Quote from: eyedrop on Mon, 20 July 2020, 14:53:33
Jae, why are the two bottom keys of the macro keys on the layout marked red?  Just curious.

Quote from: Jae-3soteric on Mon, 20 July 2020, 13:09:14
<snip>
  • - Option for 8 macro keys (+logo) or 10 macro keys
<snip>
Red with Brass pen rail and logo top
Show Image
(https://imgur.com/9JPoLPZ.png)

Red with Grey pen rail and 10 key macro top
Show Image
(https://imgur.com/mE9gKJm.png)


 ;)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: eyedrop on Mon, 20 July 2020, 15:03:37
Thanks eskimojo.  I didn't read closely.   :-[
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: nicknak30 on Mon, 20 July 2020, 15:14:47
finally made a geekhack account just to follow this project lol. Long time peruser and now you've finally converted me. I'm in, love the layout
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: lunr on Mon, 20 July 2020, 15:43:12
excited.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Shiro on Mon, 20 July 2020, 15:56:49
very sexy, cant wait
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: ObsidianRaid on Mon, 20 July 2020, 16:25:09
Stoked for this! Definitely in.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: hkhawk on Mon, 20 July 2020, 16:26:53
Tasty, tasty
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Mukduk on Mon, 20 July 2020, 16:46:34
Definitely interested in this. Just to decide which colour will go best with GMK Firefly. Still, depends on price because I've just joined GB on KBD8X. Damn timing. Ha

Sent from my Pixel 2 using Tapatalk

Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: jmsp0511 on Mon, 20 July 2020, 17:01:27
that E-White LE is my dream board... drool...
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Irrelephent on Mon, 20 July 2020, 17:05:09
I need this in my life, period. I fell in love with the design of the original and have just been waiting ever since. It's more beautiful than I could've imagined.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: jo h n on Mon, 20 July 2020, 18:05:53
Im all in
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: gottadowork on Mon, 20 July 2020, 18:17:01
Looking forward to the GB date!


Sent from my iPhone using Tapatalk
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: 2QT2BSTR8 on Mon, 20 July 2020, 18:21:02
Yes please
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: tonyjones on Mon, 20 July 2020, 18:31:25
I'm in.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: SuddenlyDonkey on Mon, 20 July 2020, 18:47:28
I've always fancied the pen rail; functional and classy. Does anyone have a daily driver that the pen rail gets a lot of use? I'm curious to how the ano holds up to nicks and scratches. I'd be scurred to use it on the e-white.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: noahf on Mon, 20 July 2020, 19:01:02
i use pilot hitec C or signo DX's. Both in their plastic case and the j01 has held up fine. Im sure if you use a brass pen case or a Ti pen case and you are super rough with it, you could wear spots in or cause some nic's. but nothing that wont look better with some break in. it will be hard to have super pristine but also used daily with metal pen cases + white. though e white might offer a decent protection layer.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: robotictomato on Mon, 20 July 2020, 19:24:09
While I really liked the aesthetics of the brass mid-layer, I appreciate that you are looking to improve the sound. From the brief typing test you did on Twitch, I think it sounds great.

Looking forward to this.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Scarybean on Mon, 20 July 2020, 19:33:25
Please take my money! That e-white edition is gorgeous!! I can not wait to have a chance to own this board.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: neutralstate on Mon, 20 July 2020, 19:54:47
pls make as many as you can, i don't want to miss out!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: solomonshv on Mon, 20 July 2020, 20:15:48
plz gib
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Permeability on Mon, 20 July 2020, 20:26:13
very interested in one in navy!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: ponchofreedo on Mon, 20 July 2020, 20:31:57
hell yes...cannot wait for this one
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Aevyn on Mon, 20 July 2020, 21:34:21
Inb4 aeryx comes in with a lawsuit for not calling it "Aegis Navy"

Sent from my GM1915 using Tapatalk

Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: crestia on Mon, 20 July 2020, 21:38:00
definitely into this :)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: FionaC on Mon, 20 July 2020, 21:38:53
This will be my first high-end custom board after the kbd75...if I can get one   :)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: solomonshv on Tue, 21 July 2020, 00:57:26
Quote
Volume/No of Units: TBC depending on IC feedback, likely to be 100-200 if the demand is there.

lol, is that for real? if this GB goes unlimited, 2k sales easy. i'm NOT saying it should, in fact i'm against it, but the demand will 100% be there.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: NathanAlphaMan on Tue, 21 July 2020, 01:04:20
Quote from: Jae-3soteric on Mon, 20 July 2020, 14:20:05
Quote from: dmatx1 on Mon, 20 July 2020, 14:02:52
Quote from: paqji on Mon, 20 July 2020, 13:58:07
a few months back i foolishly spent weeks searching for one, i am so happy to see it's back and fresher than ever

So far none of the OG J-01s are sold, all of them are at their original owners.

I'm really thankful for that - the OG J-01 owners are a rare bunch

Without a doubt the OG J-01 is the best board I have in my collection, I can't see myself ever getting rid of it despite fully planning on getting a rev 1.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: kimcames on Tue, 21 July 2020, 01:32:04
E-White  :eek: If I'm able to get one I'm in :cool:
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: LXYN on Tue, 21 July 2020, 01:53:47
Lovely! Please don't remove brass mid layer T.T
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: huey on Tue, 21 July 2020, 02:16:03
Stellar IC. Flexs' renders are something else and do this board soo much justice.

I'm very much looking forward to seeing this process.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Nyeezy on Tue, 21 July 2020, 02:22:01
Let’s go!!!


Sent from my iPhone using Tapatalk
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: kronograf on Tue, 21 July 2020, 02:53:53
Was in for J-02. Totally in for this too.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: bow3i on Tue, 21 July 2020, 03:14:59
ooooooh this is sexy, when can i throw money at you sir
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Stanley.Bishop on Tue, 21 July 2020, 03:15:08
In for white or black, if it's in my price reach. Great board
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: GSPADE on Tue, 21 July 2020, 03:19:14
 ;D Very nice. Would like one of these in navy and gold artisan <3
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Tue, 21 July 2020, 03:53:16
Quote from: eyedrop on Mon, 20 July 2020, 14:53:33
Jae, why are the two bottom keys of the macro keys on the layout marked red?  Just curious.

Two different top cases. you can have 8 keys and the logo, or 10 keys in the macro pad

Quote from: SuddenlyDonkey on Mon, 20 July 2020, 18:47:28
I've always fancied the pen rail; functional and classy. Does anyone have a daily driver that the pen rail gets a lot of use? I'm curious to how the ano holds up to nicks and scratches. I'd be scurred to use it on the e-white.

Yes, I've been using the OG J-01 for a couple of years daily now with a solid brass pen, there are no marks in the anode, but the brass on the back of the brass penrail has increased patina, I assume from passing on the oils from my hands. If it was clearcoated that would be less of an issue.

Quote from: Macmutant on Mon, 20 July 2020, 14:40:30
Congrats on this beautifully refined design, Jae. I’m very excited and anxious to join.

Thanks - James was much more accurately able to re-create my vision than the OG J-01, despite how much I love that board, and then we brought it up to modern spec with seamless design etc.

Quote from: Mukduk on Mon, 20 July 2020, 16:46:34
Definitely interested in this. Just to decide which colour will go best with GMK Firefly. Still, depends on price because I've just joined GB on KBD8X. Damn timing. Ha

Sent from my Pixel 2 using Tapatalk



Firefly is a good set - I'd go Blue....

Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Tue, 21 July 2020, 03:56:23
Quote from: Aevyn on Mon, 20 July 2020, 21:34:21
Inb4 aeryx comes in with a lawsuit for not calling it "Aegis Navy"

Sent from my GM1915 using Tapatalk



I'll reach out to him - wasn't aware this was his colour specifically so I'll have a chat with him today

Quote from: huey on Tue, 21 July 2020, 02:16:03
Stellar IC. Flexs' renders are something else and do this board soo much justice.

I'm very much looking forward to seeing this process.

Flex teaser shots are sooooo good man, and his scene work is amazing


Quote from: GSPADE on Tue, 21 July 2020, 03:19:14
;D Very nice. Would like one of these in navy and gold artisan <3

Artisan options.... hmmm... something for me to look into
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: lmiahhh on Tue, 21 July 2020, 07:49:37
Take my money, count me in :)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Kinesiologist on Tue, 21 July 2020, 10:09:42
Definitely keeping an eye on this one. Will there be an option to have matching case color for top and bottom piece?

IC form filled. thanks.

Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Tue, 21 July 2020, 10:30:58
Quote from: Kinesiologist on Tue, 21 July 2020, 10:09:42
Definitely keeping an eye on this one. Will there be an option to have matching case color for top and bottom piece?

IC form filled. thanks.

No - the top and bottom case will be different. Grey base with either the red, black or blue. Onlt the E-white option will come with the same colour top and bottom case.

The reason for this is that I prefer the aesthetic of the grey base with the coloured tops as it helps to achieve the floating look of the board, and fits the design language better. The E-white version achieves similar through natural shadows as the top is much paler than the other colours.

Just on the Blue, someone mentioned that this was the same Blue as the Aegis navy. I reached out to Aeryxz and confirmed it is the same pantone.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: _rubik on Tue, 21 July 2020, 10:40:40
I remember seeing a J01 a the norcal meetup. This most certainly has my attention
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Wed, 22 July 2020, 05:22:15
Quote from: NathanAlphaMan on Tue, 21 July 2020, 01:04:20
Quote from: Jae-3soteric on Mon, 20 July 2020, 14:20:05
Quote from: dmatx1 on Mon, 20 July 2020, 14:02:52
Quote from: paqji on Mon, 20 July 2020, 13:58:07
a few months back i foolishly spent weeks searching for one, i am so happy to see it's back and fresher than ever

So far none of the OG J-01s are sold, all of them are at their original owners.

I'm really thankful for that - the OG J-01 owners are a rare bunch

Without a doubt the OG J-01 is the best board I have in my collection, I can't see myself ever getting rid of it despite fully planning on getting a rev 1.

Awww thanks man - I appreciate that. I'm lucky none have sold on and everyone still has their boards
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: prizeS on Wed, 22 July 2020, 05:49:54
Love your taste as always, Jae. Stellar looking design and even with the Zenith I'll still support. ;) can't wait, keep it up.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Xemnova on Wed, 22 July 2020, 22:17:47
very cool to see this make a return. Always hear the OG J-01 as a reference during conversations. Love that you're actively working towards better sound and feel for your boards rather than just minor improvements. I'm slowly coming around to e-white boards so I'm curious about how limited the limited e-white will be? Also, what are the plans for the GB type? Raffle or FCFS?
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: 2QT2BSTR8 on Wed, 22 July 2020, 22:19:10
Quote from: Xemnova on Wed, 22 July 2020, 22:17:47
very cool to see this make a return. Always hear the OG J-01 as a reference during conversations. Love that you're actively working towards better sound and feel for your boards rather than just minor improvements. I'm slowly coming around to e-white boards so I'm curious about how limited the limited e-white will be? Also, what are the plans for the GB type? Raffle or FCFS?
Raffle LE, FCFS Standard.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Thu, 23 July 2020, 03:15:22

Quote from: 2QT2BSTR8 on Wed, 22 July 2020, 22:19:10
Quote from: Xemnova on Wed, 22 July 2020, 22:17:47
very cool to see this make a return. Always hear the OG J-01 as a reference during conversations. Love that you're actively working towards better sound and feel for your boards rather than just minor improvements. I'm slowly coming around to e-white boards so I'm curious about how limited the limited e-white will be? Also, what are the plans for the GB type? Raffle or FCFS?
Raffle LE, FCFS Standard.

This is the current plan. As we get closer and I can announce dates / prices I'll provide some more info on these. LE will likely be 10% or so of the main number (with some additional for F&F)

Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: SxM Designs on Thu, 23 July 2020, 03:17:17
Any ballpark estimate for this? I wanted to know since otherwise I would consider joining another GB which will end soon.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: CF73 on Thu, 23 July 2020, 12:00:38
I didn't expect this to be back for a public gb. Stoked already!
probably gonna sell out in few mins like all gbs that ran lately though...
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: hottrout on Thu, 23 July 2020, 12:26:59
This is THE keyboard of 2020.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Sabin on Thu, 23 July 2020, 13:21:01
Quote from: sayantanroy47 on Thu, 23 July 2020, 03:17:17
Any ballpark estimate for this? I wanted to know since otherwise I would consider joining another GB which will end soon.
He has not finalized but I think all he has said is it will be under $600
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: toumatakeshi on Thu, 23 July 2020, 17:34:08
I want. Hoping I get it.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: LVNDSCAPE on Fri, 24 July 2020, 23:55:48
Will you consider a rose-gold option?
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Sun, 26 July 2020, 08:40:17
Quote from: LVNDSCAPE on Fri, 24 July 2020, 23:55:48
Will you consider a rose-gold option?

Not currently in the plans. I'm open to doing custom coloured one off's after the GB though
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Starius on Sun, 26 July 2020, 12:54:58
I tried to get in the run for the original J-01 prototype and that didn't work out.... and now after looking at some of those changes for this iteration, I feel it may have been a blessing in disguise.  Looks like some nice thought out refinements.  I may try another run at getting a J-01.  ;)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: dom on Fri, 31 July 2020, 00:08:59
Jae, please set the quantity right, so everyone can grab it! 🙏  fantastic one!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: santela on Fri, 31 July 2020, 01:20:36
Damn, never thought I'd have the chance to purchase this board! Hope the number is right so people don't have to miss out.

I am curious if there is a possibility of different colored penrails? Would be great to match with keycaps.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: tempo on Fri, 31 July 2020, 01:38:12
Such a beautiful board
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: rmendis on Sat, 01 August 2020, 01:07:48
Love it
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Kings on Sat, 01 August 2020, 05:47:17
Excited for this! Any chance you'll have a black pen rail in the future?
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: FZ on Sat, 01 August 2020, 07:22:53
This is nice. Can't wait for the group buy.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: jooobe on Sat, 01 August 2020, 09:03:57
give me blue with brass rails and logo please
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: BlueBoy on Sun, 02 August 2020, 11:49:27
Hope the number of units is high for this one
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Sun, 02 August 2020, 13:16:23
Quote from: Starius on Sun, 26 July 2020, 12:54:58
I tried to get in the run for the original J-01 prototype and that didn't work out.... and now after looking at some of those changes for this iteration, I feel it may have been a blessing in disguise.  Looks like some nice thought out refinements.  I may try another run at getting a J-01.  ;)

Thanks - lots of refinements, modernisation and some subtle changes  :thumb:

Quote from: rmendis on Sat, 01 August 2020, 01:07:48
Love it

and I love you


Quote from: dom on Fri, 31 July 2020, 00:08:59
Jae, please set the quantity right, so everyone can grab it! 🙏  fantastic one!

updates from the feedback form, and annoucements on numbers soon.com

Quote from: jooobe on Sat, 01 August 2020, 09:03:57
give me blue with brass rails and logo please

Blue and Brass will look great :D

Quote from: BlueBoy on Sun, 02 August 2020, 11:49:27
Hope the number of units is high for this one

Details on numbers soon...
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Sun, 02 August 2020, 17:28:16
Hey folks - quick update:

Thank you to everyone who filled out the feedback form, I've now closed it down. In all we got about three times the number of responses I was expecting, with a huge array of suggestions. Sadly most of the suggestions are compromises I don't want to add to this board however, here are some suggestions that made the cut:

    i) 6u spacebar / row - will be added to PCB layouts only (ofc plate files will be public once the GB closes)
    ii) Split Spacebar option - will be added to PCB layouts only (ofc plate files will be public once the GB closes)
    iii) FR4 plates - will be included in material options

97.5% of responders voted 'yes' to purchasing one, and 2.5% responded 'maybe'. Given this, I intend to make 150 units available with a caveat - if those sell out within the first day I'll open up another 50 for a total of 200 24 hours later. For successful buyers a form will be issued via email for you to select your options. These will be FCFS.

There will be a raffle for the 20 Limited Edition E-white spots one week prior (and some additional F&F LE spots at my discretion).

Prices and dates for both LE and standard versions will be announced soon - I'm currently working through these but expect the date to be late August.

Its late here so I'll update the OP tomorrow :D
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: huey on Sun, 02 August 2020, 17:39:20
FR4 plates was a great addition, I appreciate it chief.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: NotFai on Sun, 02 August 2020, 17:45:07
I have definitely entered this hobby at the perfect time. Cannot believe I will already have the chance to pickup up my endgame keyboard. I wish you all the best and hope that everyone who really wants one will be able to get in on this.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Surefoot on Sun, 02 August 2020, 18:03:25
Definitely in for that deep blue version... probably with the brass bar too. ISO CF plate is a go !
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Xemnova on Sun, 02 August 2020, 18:36:56
Do you plan on running GBs for different colorways of the pen rail? Asking since the dark navy board with pink accent and pen rail in the J-02 render for the GMK Pink on Navy IC looks sleek af (yes, I know this is the J-01 and not the J-02 used in that render, but I think it would still look just as good)
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Scarybean on Sun, 02 August 2020, 20:38:48
Happy with the arrangements for quantity. Fingers crossed I will be able to get one when it goes live! Appreciate the addition of the FR4 plate, keen to try out both that and carbon fibre to see which I prefer in this board. Looking forward to the FE raffle too, as I love the e-white! Maybe the RNG gods will be on my side this time? haha
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Mon, 03 August 2020, 02:16:26
Quote from: Xemnova on Sun, 02 August 2020, 18:36:56
Do you plan on running GBs for different colorways of the pen rail? Asking since the dark navy board with pink accent and pen rail in the J-02 render for the GMK Pink on Navy IC looks sleek af (yes, I know this is the J-01 and not the J-02 used in that render, but I think it would still look just as good)

Yes and no, it will have an MOQ for any colour options as an addition later, but I'm happy to entertain te idea (personally thinking of doing a full eva themed one later down the line)



Quote from: huey on Sun, 02 August 2020, 17:39:20
FR4 plates was a great addition, I appreciate it chief.

Gotta give the people the options they want :D



Quote from: Surefoot on Sun, 02 August 2020, 18:03:25
Definitely in for that deep blue version... probably with the brass bar too. ISO CF plate is a go !

Blue and brass will be lovely - solid choice



Quote from: Scarybean on Sun, 02 August 2020, 20:38:48
Happy with the arrangements for quantity. Fingers crossed I will be able to get one when it goes live! Appreciate the addition of the FR4 plate, keen to try out both that and carbon fibre to see which I prefer in this board. Looking forward to the FE raffle too, as I love the e-white! Maybe the RNG gods will be on my side this time? haha

More details on the LE Raffle soon!!



Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: hottrout on Mon, 03 August 2020, 04:00:49
Excited beyond normal.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: solomonshv on Tue, 04 August 2020, 03:48:00
Quote from: Kings on Sat, 01 August 2020, 05:47:17
Excited for this! Any chance you'll have a black pen rail in the future?

probably not. if i manage to snag a board, i'll grab an extra rail and figure out how to paint black myself.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: HardlyFlaccid on Tue, 11 August 2020, 21:24:41
Quote from: solomonshv on Tue, 04 August 2020, 03:48:00
Quote from: Kings on Sat, 01 August 2020, 05:47:17
Excited for this! Any chance you'll have a black pen rail in the future?

probably not. if i manage to snag a board, i'll grab an extra rail and figure out how to paint black myself.

Since the rails don't seem to be painted, you could also anodize it with a voltage regulator, some electrodes, and some acid (or a car battery if you're broke and ratchet, but know what you're doing) and you could get the aluminum one to be whatever color you want (including black). It's a finicky process though but you could also get someone to do it for you relatively (in the custom world at least) cheap
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: KeebOnMe on Tue, 11 August 2020, 21:48:20
The board looks great, I'm excited to see what else you come up with!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: passivekeyer on Wed, 12 August 2020, 06:55:54
Looks great! I am in!
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: sagarsiddhpura on Wed, 12 August 2020, 14:02:34
Please have enough GB slots
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: bobgr8 on Thu, 13 August 2020, 05:15:12
How is the carbon fibre plate? Does it flex in the North- South direction or Left-right direction
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: jmarocchi on Sat, 15 August 2020, 23:11:41
Really excited for this board. As endgame as it gets.
Title: Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Mon, 17 August 2020, 13:59:00
Ok so J-01 Rev 1 Updates on Prices and dates... All USD prices are approximates as the boards will be listed in GBP but should convert roughly to the prices noted

Dates first:

 - Limited Edition Raffle - Opens 29th August for 24 hours. Winners Drawn and invoiced on 31st August - 72 hours to pay.

 - Standard Edition - FCFS @ prototypist.net 5th September - 200 units. If all units sell silly quick - 50/100 more 24 hours later (y'all seem hungry enough for this)


Prices:

- Limited Edition (all e-white, brass pen rail) = £445 / $590

- Standard edition (3 colour options, grey base, grey pen rail) = £390 / $510

- Extras - PCB = £30 / $40, Plates (CF or FR4) = £27-35 / $35-45, Brass pen rail = £55 / $70, Grey pen rail = £40 / $50

All boards come with:
- Top Case
- Bottom Case
- Pen Rail (alu for standard, brass for Limited)
- Hard Carry Case
- Triple Layer Gaskets
- CF plate (ISO or ANSI)
- Hardware
- PCB
- Daughterboard (and JST)


Once you purchase FCFS you'll get an email with a form to complete your preferences for colour choices and 10 key macro or 8+logo etc. If this is not completed within 48 hours I'll pick for you

Shipping is whatever shipping is - DHL calculate it automagically - that being said if you buy and it seems crazy high def get in touch to discuss.

EU folks - these are the prices without VAT - if you have an EU address VAT will be applied on top at 20% automatically at checkout
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: hottrout on Mon, 17 August 2020, 14:26:05
OK people, it's HAPPENING !!!!
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: soloplayer on Mon, 17 August 2020, 14:27:46
my wallet is ready than ever
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: lmiahhh on Mon, 17 August 2020, 14:44:19
My body is ready...


Also, do we have an exact time when the drawing/FCFS sales are?
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Zaum.Tech on Mon, 17 August 2020, 14:53:31
A fantastic board Jae.
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Mon, 17 August 2020, 15:11:05
Quote from: soloplayer on Mon, 17 August 2020, 14:27:46
my wallet is ready than ever

Quote from: hottrout on Mon, 17 August 2020, 14:26:05
OK people, it's HAPPENING !!!!

Quote from: Zaum.Tech on Mon, 17 August 2020, 14:53:31
A fantastic board Jae.

Thank you for the support folks :D

Quote from: lmiahhh on Mon, 17 August 2020, 14:44:19
My body is ready...


Also, do we have an exact time when the drawing/FCFS sales are?

Dates are announced - times not yet. I'll provide plenty of notice

Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: ddrfraser1 on Mon, 17 August 2020, 15:15:44
Sigh, I'm very excited for this but also dreading that moment when I try to check out and it 'says out of stock'  :-[
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Mon, 17 August 2020, 15:18:36
Quote from: ddrfraser1 on Mon, 17 August 2020, 15:15:44
Sigh, I'm very excited for this but also dreading that moment when I try to check out and it 'says out of stock'  :-[

If they go really quick I'll open it for more units 24 hours later to give people a chance
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Alchemist Keyboards on Mon, 17 August 2020, 16:35:41
Has been a pleasure to be involved with this one. So glad to finally see it go on sale!
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Macmutant on Mon, 17 August 2020, 19:06:23
Beyond stoked for this board. Thanks for adding the extra units, Jae. I hope we can all get one.
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: jooobe on Mon, 17 August 2020, 20:03:12
Is it at a specific time on September 5th?
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: 3yatt on Mon, 17 August 2020, 22:46:07
what time specifically on September 5th?
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: dmatx1 on Tue, 18 August 2020, 00:48:47
Quote from: jooobe on Mon, 17 August 2020, 20:03:12
Is it at a specific time on September 5th?

Discord:
"Times will be decided closer to the dates, but announced well in advance"
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: dmatx1 on Tue, 18 August 2020, 00:49:08
-
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Starius on Tue, 18 August 2020, 12:06:51
I’m only allocating funds for 3 keyboard group buys this year, and this is one of them!
Good luck to everyone!  :thumb:
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: DillonHightower on Thu, 20 August 2020, 05:21:22
I am in bud :pray:
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Paitupai on Thu, 20 August 2020, 22:15:37
Really great board Jae!! I watched your J-01 rev1 prototype build as well as the original J-01 build vods from other streamer and the board is gorgeous and sound great. Happy to see the refinements you made for the board.


I didn't make it for the IC form (closed already), however I hope I can get a slot :) GL with the GB!
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: ilikerustoo on Thu, 20 August 2020, 23:28:31
I'll take one
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: neutralstate on Sun, 23 August 2020, 01:19:46
sorry, wanted to clarify, will POM plates still be an option?

In the first post, POM plates are listed under "colors/options", but are not mentioned under "GB details".
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: 2QT2BSTR8 on Sun, 23 August 2020, 02:55:27
They won't be. Jae mentioned in his Discord that he got samples, but he wasn't happy with the quality.
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Sun, 23 August 2020, 08:07:00
Quote from: Macmutant on Mon, 17 August 2020, 19:06:23
Beyond stoked for this board. Thanks for adding the extra units, Jae. I hope we can all get one.

Thanks - I'm hoping its a good mid ground between demand and GB size - but we will see :D

Quote from: jooobe on Mon, 17 August 2020, 20:03:12
Is it at a specific time on September 5th?
Quote from: 3yatt on Mon, 17 August 2020, 22:46:07
what time specifically on September 5th?

I'll announce the time early next week - a few days beofre the LE raffle. It will be the same time for the GB a week later as well

Quote from: Paitupai on Thu, 20 August 2020, 22:15:37
Really great board Jae!! I watched your J-01 rev1 prototype build as well as the original J-01 build vods from other streamer and the board is gorgeous and sound great. Happy to see the refinements you made for the board.


I didn't make it for the IC form (closed already), however I hope I can get a slot :) GL with the GB!

Thank you for the kind words!!



Quote from: neutralstate on Sun, 23 August 2020, 01:19:46
sorry, wanted to clarify, will POM plates still be an option?

In the first post, POM plates are listed under "colors/options", but are not mentioned under "GB details".

Initially I wanted to offer POM but after testing the material in the prototype I'm not happy with it, so dont want to offer it in the GB - I was very happy with an FR4 plate so that has replaced it. All plate files will be available before the GB ships so you can arrange additional materials directly
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: neutralstate on Sun, 23 August 2020, 09:03:03
Quote from: 2QT2BSTR8 on Sun, 23 August 2020, 02:55:27
They won't be. Jae mentioned in his Discord that he got samples, but he wasn't happy with the quality.

Quote from: Jae-3soteric on Sun, 23 August 2020, 08:07:00
Initially I wanted to offer POM but after testing the material in the prototype I'm not happy with it, so dont want to offer it in the GB - I was very happy with an FR4 plate so that has replaced it. All plate files will be available before the GB ships so you can arrange additional materials directly

i see, thank you both!

@Jae - what made you happy about the FR4 plate? trying to see if i should grab a cf or FR4 plate...

Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Sun, 23 August 2020, 09:05:08
Quote from: neutralstate on Sun, 23 August 2020, 09:03:03
Quote from: 2QT2BSTR8 on Sun, 23 August 2020, 02:55:27
They won't be. Jae mentioned in his Discord that he got samples, but he wasn't happy with the quality.

Quote from: Jae-3soteric on Sun, 23 August 2020, 08:07:00
Initially I wanted to offer POM but after testing the material in the prototype I'm not happy with it, so dont want to offer it in the GB - I was very happy with an FR4 plate so that has replaced it. All plate files will be available before the GB ships so you can arrange additional materials directly

i see, thank you both!

@Jae - what made you happy about the FR4 plate? trying to see if i should grab a cf or FR4 plate...

I like the sound profile and feel of the material - as well as how nice it can look
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: neutralstate on Sun, 23 August 2020, 09:24:54
Quote from: Jae-3soteric on Sun, 23 August 2020, 09:05:08
I like the sound profile and feel of the material - as well as how nice it can look

Will probably go for FR4 then since its supposedly flexier than CF.

Excited for the GB!
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: timtamale on Mon, 24 August 2020, 05:41:07
I really love the logo but it's hard to pass on the optional F1-10. I'd definitely go for it if the logo was inlaid brass or something though.
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: dmatx1 on Mon, 24 August 2020, 08:21:28
Quote from: timtamale on Mon, 24 August 2020, 05:41:07
I'd definitely go for it if the logo was inlaid brass or something though.

You can infill (https://youtu.be/ZXSGzKXGqWs?t=2695) it.
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Paitupai on Mon, 24 August 2020, 08:28:35
Quote from: dmatx1 on Mon, 24 August 2020, 08:21:28
Quote from: timtamale on Mon, 24 August 2020, 05:41:07
I'd definitely go for it if the logo was inlaid brass or something though.

You can infill (https://youtu.be/ZXSGzKXGqWs?t=2695) it.


Yup I'm planning to do that if I'm lucky enough to get one of the board. Been wanting to try that since I read and watched the infill tutorial by Jae :D

F1-10 looks really clean though, but IMO the logo makes for a personal touch of the board maker/designer, something I really like.
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Mon, 24 August 2020, 15:03:27
Here are the colour samples for the red and blue. The red has changed after getting in some sample cards next to another prototype in a similar colour


Red (on the Isla Prototype)
(https://imgur.com/bdoAERx.png)


Blue (on the Allison Prototype)
(https://imgur.com/vU2bbS2.png)
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: lunr on Mon, 24 August 2020, 15:19:05
the dark navy(?) or blue looks preeeeetty
Title: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: FlitzDeelman on Tue, 25 August 2020, 15:45:12
Jae, are the numpads something you’re working on, or has that GB already run?

I’d be interested in a numpad GB, if I manage to snag a matching J-01.

Edit: aargh, different boards, sorry!

...and if you made numpads, they’d need matching rails of course!
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Surefoot on Tue, 25 August 2020, 15:59:10
Quote from: Jae-3soteric on Mon, 24 August 2020, 15:03:27
Blue (on the Allison Prototype)
It looks purple to me (on a calibrated screen), is the photo white balance correct, or is there a colour shift somehow ? Or is that the actual colour ?
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: //gainsborough on Tue, 25 August 2020, 18:56:26
omg the allison looks so sick.  Not to get off-topic, but is that an upcoming project?
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Wed, 26 August 2020, 04:59:52
Quote from: FlitzDeelman on Tue, 25 August 2020, 15:45:12
Jae, are the numpads something you’re working on, or has that GB already run?

I’d be interested in a numpad GB, if I manage to snag a matching J-01.

Edit: aargh, different boards, sorry!

...and if you made numpads, they’d need matching rails of course!

Maybe numpads at some point...

Quote from: //gainsborough on Tue, 25 August 2020, 18:56:26
omg the allison looks so sick.  Not to get off-topic, but is that an upcoming project?

GB at some point - both Mr Petrov and I are keen to get on with that one

Quote from: Surefoot on Tue, 25 August 2020, 15:59:10
Quote from: Jae-3soteric on Mon, 24 August 2020, 15:03:27
Blue (on the Allison Prototype)
It looks purple to me (on a calibrated screen), is the photo white balance correct, or is there a colour shift somehow ? Or is that the actual colour ?

Its blue - the photo was taken under my old stream set up with an iphone but I dont have calibrated screens or anything. There are more pictures of the blue in different lighting on my intsa:

https://www.instagram.com/p/CAgpDWpnb-R/
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: FlitzDeelman on Wed, 26 August 2020, 07:38:55
Quote from: Jae-3soteric on Wed, 26 August 2020, 04:59:52
Quote from: FlitzDeelman on Tue, 25 August 2020, 15:45:12
Jae, are the numpads something you’re working on, or has that GB already run?

I’d be interested in a numpad GB, if I manage to snag a matching J-01.

Edit: aargh, different boards, sorry!

...and if you made numpads, they’d need matching rails of course!

Maybe numpads at some point...

Then, here's hoping I get lucky once (I snag a J-01), twice (you make matching numpads) and thrice (I snag one of those too)!
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Fri, 28 August 2020, 08:56:05
J-01 Rev 1 Limited Edition Raffle (20 public spots) goes live at 8pm UK time on Saturday 29th August (3pm EST, Noon PST) https://time.is/London

Form will be posted on discord and in the OP
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Paitupai on Fri, 28 August 2020, 09:01:32
Quote from: Jae-3soteric on Fri, 28 August 2020, 08:56:05
J-01 Rev 1 Limited Edition Raffle (20 public spots) goes live at 8pm UK time on Saturday 29th August (3pm EST, Noon PST) https://time.is/London

Form will be posted on discord and in the OP

Wooo!! hoping to be lucky to snatch one  :)
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: hottrout on Fri, 28 August 2020, 09:19:43
So excited, can't wait.  Crossing everything I have.
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: FireLock on Fri, 28 August 2020, 10:00:57
20 units, prob 1000 entries. 2% Chance. Already building it in my mind haha

Skickat från min SM-G960F via Tapatalk

Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: Jae-3soteric on Fri, 28 August 2020, 10:30:53
Group Buy Thread is now live:

https://geekhack.org/index.php?topic=108355
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: KaosJ on Sat, 29 August 2020, 11:55:56
Quote
EU folks - these are the prices without VAT - if you have an EU address VAT will be applied on top at 20% automatically at checkout

Will this ship from UK?
not sure with the brexit thing, if i'm in EU will i have to pay the 20% of VAT + custom fees or only the VAT? 
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: dmatx1 on Sat, 29 August 2020, 12:06:14
Quote from: KaosJ on Sat, 29 August 2020, 11:55:56
Will this ship from UK?
Yes.

Quote from: KaosJ on Sat, 29 August 2020, 11:55:56
not sure with the brexit thing, if i'm in EU will i have to pay the 20% of VAT + custom fees or only the VAT?
Nobody is sure. Currently you have to pay 20% UK VAT and time will tell what happens.
Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: SVanE on Sat, 29 August 2020, 12:55:46
Hopefully I can get my hand on one, as my first custom keyboard, I really like it, the price is no problemo

Sendt fra min SM-G950F med Tapatalk

Title: Re: [IC] J-01 Rev 1 Prices and Dates Announced (Isolation Gasket 65% with Macrokeys)
Post by: haystack on Mon, 31 August 2020, 20:17:20
It's interesting to see the numbers for limited buys like this. With the rapid growth of the hobby, the number of satisfied people doesn't change much, but thousands more are disappointed with each limited sale or raffle opportunity. A hard problem for makers, brands, and vendors who depend on satisfied customers.