Author Topic: [GB] Southpaw Full Size - Shipping and remanufacturing  (Read 106113 times)

0 Members and 1 Guest are viewing this topic.

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [GB] Southpaw Full Size - GB open till 7/29 - 27 spots left
« Reply #50 on: Sat, 28 July 2018, 17:38:21 »
Any possibility that the case will have an underglow diffuser option?

Sent from my Pixel 2 XL using Tapatalk

If you chose to have a brass weight, I'm sure you could make some kind of transparent insert.
Yep I did choose the weight option.  Anyone know of anyone who does diffusers like this?  Does the SP PCB have underglow?

Sent from my Pixel 2 XL using Tapatalk

From the prototype board above, the layout doesn't seem to support surface mount RGB leds. Maybe there's a spot for them and I'm just not seeing them. Anyway, to make diffuse would be really simple, you just measure the hole size (from the inside) and the height and then laser cut a piece of acrylic to fit in that spot and screw in via the screw holes. Won't sit flush with the bottom side, but I guess that wouldn't matter so much.

Gonna clear this up a bit, but even if you do this, it most likely won't work too well. The gap that separates the top and the bottom sits right under the plate and if you were to put a diffuser there, it would have to be pretty damn thick (more than the standard 1.5mm found on duck or other boards) to show and lighting from SMD LEDs placed underneath the PCB. Effectively, the diffuser would be between the PCB and the plate.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - GB open till 7/29 - 27 spots left
« Reply #51 on: Sat, 28 July 2018, 20:49:55 »
If we don't reach the 65 units, I assume this still going to production, right? Is there an moq? Or just an order cap?

Offline att1cus

  • * Maker
  • Posts: 233
  • Location: USA - Philadelphia
Re: [GB] Southpaw Full Size - GB open till 7/29 - 27 spots left
« Reply #52 on: Sat, 28 July 2018, 20:51:33 »
If we don't reach the 65 units, I assume this still going to production, right? Is there an moq? Or just an order cap?
I believe the MOQ on this one is 45 units.

Sent from my Pixel 2 XL using Tapatalk


Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - GB open till 7/29 - 27 spots left
« Reply #53 on: Sat, 28 July 2018, 21:27:51 »
If we don't reach the 65 units, I assume this still going to production, right? Is there an moq? Or just an order cap?
I believe the MOQ on this one is 45 units.

Sent from my Pixel 2 XL using Tapatalk

So we need 7 more entries o.O

Offline att1cus

  • * Maker
  • Posts: 233
  • Location: USA - Philadelphia
Re: [GB] Southpaw Full Size - GB open till 7/29 - 27 spots left
« Reply #54 on: Sat, 28 July 2018, 21:30:03 »
If we don't reach the 65 units, I assume this still going to production, right? Is there an moq? Or just an order cap?
I believe the MOQ on this one is 45 units.

Sent from my Pixel 2 XL using Tapatalk

So we need 7 more entries o.O
Yep I've been keeping track.  I think one person posted here since reconsiderit updated the topic, so hopefully that brings it down to 6. Really hope we hit it!

Sent from my Pixel 2 XL using Tapatalk


Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - GB open till 7/29 - 27 spots left
« Reply #55 on: Sat, 28 July 2018, 21:32:40 »
If we don't reach the 65 units, I assume this still going to production, right? Is there an moq? Or just an order cap?
I believe the MOQ on this one is 45 units.

Sent from my Pixel 2 XL using Tapatalk

So we need 7 more entries o.O
Yep I've been keeping track.  I think one person posted here since reconsiderit updated the topic, so hopefully that brings it down to 6. Really hope we hit it!

Sent from my Pixel 2 XL using Tapatalk

I'm going to be devastated if this doesn't go to prod

Offline att1cus

  • * Maker
  • Posts: 233
  • Location: USA - Philadelphia
Re: [GB] Southpaw Full Size - GB open till 7/29 - 27 spots left
« Reply #56 on: Sat, 28 July 2018, 22:18:36 »
If we don't reach the 65 units, I assume this still going to production, right? Is there an moq? Or just an order cap?
I believe the MOQ on this one is 45 units.

Sent from my Pixel 2 XL using Tapatalk

So we need 7 more entries o.O
Yep I've been keeping track.  I think one person posted here since reconsiderit updated the topic, so hopefully that brings it down to 6. Really hope we hit it!

Sent from my Pixel 2 XL using Tapatalk

I'm going to be devastated if this doesn't go to prod
🤞🤞🤞🤞

Sent from my Pixel 2 XL using Tapatalk


Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #57 on: Sun, 29 July 2018, 00:27:53 »
I know at least two people who are planning to buy one, i'll harass them in the morning
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline ag36

  • Posts: 179
  • Location: London, UK
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #58 on: Sun, 29 July 2018, 09:09:47 »
Ordered two of these instead of one because shipping cost :)
« Last Edit: Sun, 29 July 2018, 09:39:43 by ag36 »
Model M*5, SSK*4, M13 black*1, Model F XT*1, AT*1 F107*1, Unicomp*1, 3278 *1, Leopold FC750R*2, 980M*2 FC980C*1 Filco majestouch 2 TKL*1, Cooler Master MasterKeys S PBT*1, Uniqey Q100*2, Ducky pocket*1, KBD75*2, KBD19X*2, HHKB pro 2*1, Type-S*1 Topre Realforce RGB*1, 108 all 30g*1, numpad*1, 87U*1 Dell AT101W*2, Alps64*2, V80 matias quiet click*2, Quiet liner *1, WYSE ASCII *1

Offline babyphil

  • Posts: 34
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #59 on: Sun, 29 July 2018, 09:26:47 »
Hopefully it makes moq. I sold 3 boards to afford buying this board.

Offline spooknik

  • Posts: 107
  • Location: Denmark
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #60 on: Sun, 29 July 2018, 10:07:13 »
Hopefully it makes moq. I sold 3 boards to afford buying this board.

Me too! I sold my SA Godspeed set to join this GB. By my very rough and non-official calculations, I think we'll just hit MOQ. We'll find out tomorrow I guess.

Offline nevaenuf

  • Posts: 72
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #61 on: Sun, 29 July 2018, 12:17:31 »
I joined last night.  At least that's one more toward MOQ.

Offline o3okevin

  • Posts: 364
  • Location: Canada
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #62 on: Sun, 29 July 2018, 14:07:29 »
Ordered! Hope we can make it  :D

Offline spooknik

  • Posts: 107
  • Location: Denmark
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #63 on: Sun, 29 July 2018, 14:50:25 »
All these last minutes orders! It's really great, I think we can make it.

Offline att1cus

  • * Maker
  • Posts: 233
  • Location: USA - Philadelphia
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #64 on: Sun, 29 July 2018, 14:52:07 »
According to reconsiderit on Reddit, we've reached MOQ!

https://www.reddit.com/r/mechmarket/comments/90ic5i/gb_southpaw_full_size/e38p22o/

Sent from my Pixel 2 XL using Tapatalk


Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #65 on: Sun, 29 July 2018, 15:05:18 »
According to reconsiderit on Reddit, we've reached MOQ!

https://www.reddit.com/r/mechmarket/comments/90ic5i/gb_southpaw_full_size/e38p22o/

Sent from my Pixel 2 XL using Tapatalk


Offline babyphil

  • Posts: 34
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #66 on: Sun, 29 July 2018, 16:06:05 »
According to reconsiderit on Reddit, we've reached MOQ!

https://www.reddit.com/r/mechmarket/comments/90ic5i/gb_southpaw_full_size/e38p22o/

Sent from my Pixel 2 XL using Tapatalk
Awesome!

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #67 on: Sun, 29 July 2018, 17:27:49 »
According to reconsiderit on Reddit, we've reached MOQ!

https://www.reddit.com/r/mechmarket/comments/90ic5i/gb_southpaw_full_size/e38p22o/

Sent from my Pixel 2 XL using Tapatalk

nice

good spot

im hype for this
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #68 on: Tue, 31 July 2018, 21:16:34 »
So what's the dillio? We met moq. Orders are being submitted?

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [GB] Southpaw Full Size - GB open till 7/29 - 22 spots left
« Reply #69 on: Wed, 01 August 2018, 18:50:02 »
So what's the dillio? We met moq. Orders are being submitted?

Yep. All of the rest of the orders came on the last day. 
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline jrfhoutx

  • Posts: 256
  • Location: Houston, TX
  • Post count is meaningless if the content is trash.
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #70 on: Wed, 01 August 2018, 23:40:02 »
awesome design, so sad I missed this...

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #71 on: Wed, 08 August 2018, 20:08:42 »
Sent you an email but I figured I'd follow up here.

I saw the email for the re-invoice, but I haven't seen a refund for the original yet. Will you be processing those soon?

I don't want to pay the new invoice until the refund has been issued.

Offline StrangPrisoner

  • Posts: 80
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #72 on: Thu, 09 August 2018, 00:40:07 »
Sent you an email but I figured I'd follow up here.

I saw the email for the re-invoice, but I haven't seen a refund for the original yet. Will you be processing those soon?

I don't want to pay the new invoice until the refund has been issued.
I emailed him will be waiting for the reimbursement as well. My PayPal invoice(?) says that I will be reimbursed Friday August 10th to my pay pal balance. So it seems to be a PayPal thing.

Offline alisonica

  • Posts: 104
  • Location: Germany
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #73 on: Thu, 09 August 2018, 13:23:00 »
Sent an email to Glorious GB leader. Paid the re-invoice, also received the refund.
Following up here:
1) Since hard anodization black is not possible, can I go for normal anodizing with Grey color?
2) Need KLE files for Alps plates. :thumb:

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #74 on: Thu, 09 August 2018, 19:29:27 »
What's this about a reinvoice? I haven't heard anything.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline alisonica

  • Posts: 104
  • Location: Germany
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #75 on: Thu, 09 August 2018, 20:33:38 »
What's this about a reinvoice? I haven't heard anything.

Only for those who chose Hard Anodizing :)

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #76 on: Thu, 09 August 2018, 21:45:04 »
What's this about a reinvoice? I haven't heard anything.

Only for those who chose Hard Anodizing :)

i chose hard anodizing
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline o3okevin

  • Posts: 364
  • Location: Canada
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #77 on: Thu, 09 August 2018, 22:00:32 »
What's this about a reinvoice? I haven't heard anything.

Only for those who chose Hard Anodizing :)

i chose hard anodizing
Hard anodizing + 7075 aluminum

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #78 on: Thu, 09 August 2018, 22:05:48 »
What's this about a reinvoice? I haven't heard anything.

Only for those who chose Hard Anodizing :)

i chose hard anodizing
Hard anodizing + 7075 aluminum

ah ok

i got 6061

wkl w/ red half plate

was just unclear about what was going on, thanks friends
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Paopawdecarabao

  • Posts: 77
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #79 on: Fri, 10 August 2018, 10:43:30 »
Ugh! I wish I saw this sooner. Missed the GB  :(

Offline StrangPrisoner

  • Posts: 80
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #80 on: Fri, 10 August 2018, 12:49:37 »
Just checked my PayPal to see if the refund processed. It is now saying: "We're processing your refund and your money will be available on August 23, 2018We're processing your refund and your money will be available on August 23, 2018". I really don't want to tie up a grand in this group buy so I'm hoping to wait until the reimbursement is issued.

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #81 on: Fri, 10 August 2018, 12:59:13 »
At least it see the refund in PayPal. I haven't seen anything.

Offline sangoan

  • Posts: 7
  • Location: South Korea
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #82 on: Fri, 10 August 2018, 13:27:20 »
i chose 7075+hard anodized

but nothing happen

Offline forumusername

  • Posts: 162
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #83 on: Fri, 10 August 2018, 17:54:49 »
Are ppl getting Alps plates?

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #84 on: Fri, 10 August 2018, 19:42:47 »
Hey guys, a quick update, but I just visited the factory yesterday and discussed everything with them and had them go over all the important parts.

There are some issues with refunds and organizng the hard ano orders which need to be changed because my computer decided to try and update with 2% in the battery and basically bricked itself. I'm going to see what I can do locally and try and get my computer back up and running so I can get those refunds through and finalize the orders to submit to the factory on Monday.

If you have any questions, it's better to PM me on discord as that's the easiest way to communicate atm.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #85 on: Sat, 18 August 2018, 07:59:23 »
Did those orders end up getting submitted to the factory?
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #86 on: Sat, 18 August 2018, 09:29:41 »
Did those orders end up getting submitted to the factory?

Still waiting on a number of people to pay their reissued invoices as they're waiting on the system to process their refunds. It'll probably be submitted at the end-ish of this week or next week when I'm back in the US.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #87 on: Sat, 18 August 2018, 10:08:20 »
Did those orders end up getting submitted to the factory?

Still waiting on a number of people to pay their reissued invoices as they're waiting on the system to process their refunds. It'll probably be submitted at the end-ish of this week or next week when I'm back in the US.

Cool. Thanks for the update.

I saw a hard anodized norbaforce last night and it made me even more excited for this board.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline HappyCatFish

  • Posts: 130
  • Location: California
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #88 on: Fri, 24 August 2018, 12:29:43 »
Has the order been placed? It feels like this GB is already off to a rocky start...

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #89 on: Fri, 24 August 2018, 19:23:38 »
Has the order been placed? It feels like this GB is already off to a rocky start...

as long as the runner sticks around im not that worried
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #90 on: Fri, 24 August 2018, 23:14:55 »
Has the order been placed? It feels like this GB is already off to a rocky start...

I've got complete faith in reconsiderit

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #91 on: Sat, 25 August 2018, 02:54:19 »
Has the order been placed? It feels like this GB is already off to a rocky start...

I've finalized numbers and am waiting on a final invoice from the factory. Shouldn't be too long before I start sending out pics of things being made.

It took a little while to get things started as I went to China to check up on things to make sure things wouldn't fall apart midway though the GB. Just got back this Tuesday. I'll have some pics to share later.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline spooknik

  • Posts: 107
  • Location: Denmark
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #92 on: Sat, 25 August 2018, 04:28:33 »
Has the order been placed? It feels like this GB is already off to a rocky start...

I've finalized numbers and am waiting on a final invoice from the factory. Shouldn't be too long before I start sending out pics of things being made.

It took a little while to get things started as I went to China to check up on things to make sure things wouldn't fall apart midway though the GB. Just got back this Tuesday. I'll have some pics to share later.

Woah, you went to China to check things over? That's really reassuring! Can't wait to see some pics.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - Finalizing Orders
« Reply #93 on: Sat, 25 August 2018, 10:50:12 »
Has the order been placed? It feels like this GB is already off to a rocky start...

I've finalized numbers and am waiting on a final invoice from the factory. Shouldn't be too long before I start sending out pics of things being made.

It took a little while to get things started as I went to China to check up on things to make sure things wouldn't fall apart midway though the GB. Just got back this Tuesday. I'll have some pics to share later.

damn, impressive

excited
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - In Production
« Reply #94 on: Mon, 17 September 2018, 01:10:11 »
been like 3 weeks, any updates?
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [GB] Southpaw Full Size - In Production
« Reply #95 on: Mon, 17 September 2018, 02:09:05 »
been like 3 weeks, any updates?

Order submitted and paid for. The factory hasn't started anything yet but they're in the process of ordering materials. The typhoon that hit just this week will probably slow things down a ittle bit, but once I get a solid date back from them I'll start doing updates.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline ctrl

  • Posts: 294
  • Location: Umeå, Sweden
Re: [GB] Southpaw Full Size - In Production
« Reply #96 on: Mon, 17 September 2018, 04:30:11 »
Damn. Found this just now. Left handed full size would pretty much be the *only* full size kustom I'd be really down for. Will there be extras down the line? Or any thoughts about an R2 (myabe to early to tell now)?

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] Southpaw Full Size - In Production
« Reply #97 on: Mon, 17 September 2018, 07:58:31 »
been like 3 weeks, any updates?

Order submitted and paid for. The factory hasn't started anything yet but they're in the process of ordering materials. The typhoon that hit just this week will probably slow things down a ittle bit, but once I get a solid date back from them I'll start doing updates.

Sweet! Thanks for the update man!

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - In Production
« Reply #98 on: Mon, 17 September 2018, 11:37:34 »
been like 3 weeks, any updates?

Order submitted and paid for. The factory hasn't started anything yet but they're in the process of ordering materials. The typhoon that hit just this week will probably slow things down a ittle bit, but once I get a solid date back from them I'll start doing updates.

Beauty. Hope everything is cool there after the typhoon. Thanks for the update.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Southpaw Full Size - In Production
« Reply #99 on: Wed, 19 September 2018, 13:21:33 »
In case anyone didn't get it, there was an email update stating that machining has begun.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90