Author Topic: Teensy floating around ... how to fasten it?  (Read 1137 times)

0 Members and 1 Guest are viewing this topic.

Offline Eszett

  • Thread Starter
  • Posts: 464
  • Supporting the communities Geekhack & Deskthority
Teensy floating around ... how to fasten it?
« on: Sun, 02 August 2015, 20:01:32 »
Hi! Here is my hand wiring. Im not quite satisfied with that the Teensy beeing loose. How do you fasten the Teensy in a rock solid way? I thought about glueing some metal sheet(?) to the top or bottom plate, and solder the USB-connector of the Teensy to that metal thing. But it isn't that easy, for the Teensy is not even flat to the ground, it floats around due to the wires ...
« Last Edit: Sun, 02 August 2015, 20:15:33 by Eszett »

Offline Melvang

  • Exquisite Lord of Bumfluff
  • * Maker
  • Posts: 4367
  • Location: Waterloo, IA
  • Melvang's Desktop Customs
Re: Teensy floating around ... how to fasten it?
« Reply #1 on: Sun, 02 August 2015, 20:19:27 »
Search for GHT2BO on oshparks shared projects.
OG Kishsaver, Razer Orbweaver clears and reds with blue LEDs, and Razer Naga Epic.   "Great minds crawl in the same sewer"  Uncle Rich
Order Form for MDC Mouse Pad
Contact Form for questions

IBM F Revival Services Now with VIDEO

Offline fohat.digs

  • * Elevated Elder
  • Posts: 5222
  • Location: 34.04 N 84.47 W
  • weird funny old guy
Re: Teensy floating around ... how to fasten it?
« Reply #2 on: Sun, 02 August 2015, 20:33:18 »
Don't worry, be happy.

Wrap it in felt fabric or packing foam and let it be free.
James McGill Buchanan decided he needed to influence policy at a deeper level. In the ensuing years, he sought to lead an economic and political movement in which he stressed that “conspiratorial secrecy is at all times essential” to mask efforts to protect the wealthy elite from the will of the majority. In September 1973, Buchanan held the inaugural meeting of the International Atlantic Economic Society, arguing for the need to “create, support and activate an effective counterintelligentsia” to reshape the way people thought about government. He believed the center-left controlled academia and “effectively indoctrinated political actors in both parties,” MacLean writes. To fight back, conservatives needed to develop new surrogates who could be “indoctrinated” in turn with right-wing ideas, and then “mobilized, organized and directed” to disseminate them.
Seeing the name eventually led her to rooms full of documents that made clear how “operatives” had been trained “to staff the far-flung and purportedly separate, yet intricately connected, institutions funded by the Koch brothers and their now large network of fellow wealthy donors.” - Nancy McLean 2017

Offline Eszett

  • Thread Starter
  • Posts: 464
  • Supporting the communities Geekhack & Deskthority
Re: Teensy floating around ... how to fasten it?
« Reply #3 on: Sun, 02 August 2015, 20:42:02 »
Hi Melvang. Great to see that! Let me calculate the prices ...

@fohat.digs I want the Teensy to stand a rough cable plugin or plugout ...

Would it be possible to solder the Teensy's usb connector at this spot (marked blue on the image) to the case? Or does it effect a circuit short?
« Last Edit: Sun, 02 August 2015, 21:38:30 by Eszett »

Offline neverused

  • Posts: 571
Re: Teensy floating around ... how to fasten it?
« Reply #4 on: Sun, 02 August 2015, 22:48:24 »
Use good quality double stick tape. It wouldn't be my preference to solder the USB housing to a metal plate, I feel like you'd be using too much heat to get such large pieces together.
« Last Edit: Mon, 03 August 2015, 02:12:30 by neverused »

Offline Yoe

  • Posts: 272
  • Location: Skellefteå, Sweden
  • Alps & ISO <3
Re: Teensy floating around ... how to fasten it?
« Reply #5 on: Mon, 03 August 2015, 02:07:01 »
Double stick tape is a good idea. I've also used adhesive fabric tape (the black kind for making wire harnesses and stuff like that) a lot lately to bring order to things inside my hand wired keyboards. Also using usb adapters mounted to the case could be an alternative (see my 60% Alps build).

Offline 3K

  • Posts: 276
  • Location: Germany
Re: Teensy floating around ... how to fasten it?
« Reply #6 on: Mon, 03 August 2015, 08:54:21 »
I want the Teensy to stand a rough cable plugin or plugout ...

Why not using a short USB extension cable? You could attach the female side to the case however you like without needing to think about the teensy.

                   Model M '88    | Model M SSK '87 | HHKB P2  | Zowie FK1

Offline Yoe

  • Posts: 272
  • Location: Skellefteå, Sweden
  • Alps & ISO <3
Re: Teensy floating around ... how to fasten it?
« Reply #7 on: Mon, 03 August 2015, 10:01:09 »
I want the Teensy to stand a rough cable plugin or plugout ...

Why not using a short USB extension cable? You could attach the female side to the case however you like without needing to think about the teensy.

Yeh, something like this.

107245-0

Just route the cable as you like, put the teensy wherever, and make the extension cable take the beatings from plugin/plugout.

Offline Findecanor

  • Posts: 3596
  • Location: Stockholm, Sweden
Re: Teensy floating around ... how to fasten it?
« Reply #8 on: Mon, 03 August 2015, 14:54:52 »
Search for GHT2BO on oshparks shared projects.
... Or use a piece of cheap tri-strip board cut to size, and with holes that you drilled yourself. ;)

... Or use a socket but solder the Teensy to the wrong side: the socket's pins. Glue a mounting bracket to the socket. Insert the wires into the socket's holes.

However, neither option would give you access to the holes on the interior or the short end.
« Last Edit: Mon, 03 August 2015, 15:01:34 by Findecanor »
"Normal is the greatest enemy in regard to creating the new. To get around this you have to understand normal not as reality but as just a construct." -- Alan Kay
Daily driver: Phantom (Lubed Cherry MX Clear, Lasered Cherry PBT keycaps with Row A. Plastic "Frankencase". Custom firmware, Swedish layout)

Offline hasu

  • Posts: 2537
  • Location: Tokyo, Japan
  • @tmk
    • tmk keyboard firmware project
Re: Teensy floating around ... how to fasten it?
« Reply #9 on: Mon, 03 August 2015, 20:16:13 »
hot glue it!
TMK products:HHKB Alt  ⌨ConvertersAlps64FC660C AltFC980C Alt

Offline blcksqrrl

  • Posts: 62
  • Location: Tobacco Fields of NC
  • I'm afraid that I just blue myself
Re: Teensy floating around ... how to fasten it?
« Reply #10 on: Mon, 03 August 2015, 21:32:05 »
I like to use double sided tape to secure the Teensy to the PCB and then use a Dremel to carve out a piece of high-density foam to secure it in place on the other side.
  
  
  
Poker II MX Blue
  
KUL ES-87 MX Blue
  
Apple Standard Keyboard
  
Apple Extended Keyboard II

Offline Eszett

  • Thread Starter
  • Posts: 464
  • Supporting the communities Geekhack & Deskthority
Re: Teensy floating around ... how to fasten it?
« Reply #11 on: Tue, 04 August 2015, 02:04:18 »
hot glue it!

Nice proposal, hasu! I will try that first, since it is easy and costs me no money (my neighbour can lend me a hot glue pistol)

Offline BrewCaps

  • Posts: 113
Re: Teensy floating around ... how to fasten it?
« Reply #12 on: Tue, 04 August 2015, 11:45:07 »
Velcro

Offline Oobly

  • * Esteemed Elder
  • Posts: 3928
  • Location: Finland
Re: Teensy floating around ... how to fasten it?
« Reply #13 on: Wed, 05 August 2015, 07:41:19 »
Nailgun....

;) Hotglue is good, but doesn't "stick" all that well unless it has some holes / rough bits to form around. For something more permanent you can try epoxy. If you want to stick it to a flat surface, then some "No More Nails" type of double sided mounting tape should work well.
Buying more keycaps,
it really hacks my wallet,
but I must have them.

Offline Findecanor

  • Posts: 3596
  • Location: Stockholm, Sweden
Re: Teensy floating around ... how to fasten it?
« Reply #14 on: Wed, 05 August 2015, 15:19:41 »
I am leaning towards using double-sided foam tape in a build I'm working on.
"Normal is the greatest enemy in regard to creating the new. To get around this you have to understand normal not as reality but as just a construct." -- Alan Kay
Daily driver: Phantom (Lubed Cherry MX Clear, Lasered Cherry PBT keycaps with Row A. Plastic "Frankencase". Custom firmware, Swedish layout)

Offline njbair

  • Posts: 2819
  • Location: Cleveland, Ohio
  • I love the Powerglove. It's so bad.
    • nickbair.net
Re: Teensy floating around ... how to fasten it?
« Reply #15 on: Wed, 05 August 2015, 15:23:33 »
+1 for hot glue. That stuff is serious.

Alpine Winter GB | My Personal TMK Firmware Repo
IBM Rubber Band "Floss" Mod | Click Modding Alps 101 | Flame-Polishing Cherry MX Stems
Review: hasu's USB to USB converter
My boards:
More
AEKII 60% | Alps64 HHKB | Ducky Shine 3, MX Blues | IBM Model M #1391401, Nov. 1990 | IBM SSK #1391472, Nov. 1987, screw modded, rubber-band modded | Noppoo EC108-Pro, 45g | Infinity 60% v2 Hacker, Matias Quiet Pros | Infinity 60% v2 Standard, MX Browns | Cherry G80-1800LPCEU-2, MX Blacks | Cherry G80-1813 (Dolch), MX Blues | Unicomp M-122, ANSI-modded | Unicomp M-122 (Unsaver mod in progress) | 2x Unitek K-258, White Alps | Apple boards (IIGS, AEKII) | Varmilo VA87MR, Gateron Blacks | Filco Zero TKL, Fukka White Alps | Planck, Gateron Browns | Monarch, click-modded Cream Alps