Author Topic: What did you add to your Keyboard today? - Post Your Pics (Read 4580673 times)

demik · « **Reply #8800 on:** Mon, 09 March 2015, 20:34:59 »

crotch shot

Touch_It · « **Reply #8801 on:** Mon, 09 March 2015, 20:36:32 »

Quote from: demik on Mon, 09 March 2015, 20:34:59

crotch shot

Not even charging! You're welcome. Welcome

bueller · « **Reply #8802 on:** Mon, 09 March 2015, 20:47:10 »

Quote from: Badwrench on Sun, 01 March 2015, 23:06:38

Built a case/wrist rest for the JD40 today. Wood is Purple heart and is finished with Tung Oil and then waxed. The mounting area is routed out so that the bottom is solid. I still need to get the correct hardware to mount the top plate and a small enough drill bit for said screws, but overall, I am happy with it.

(Attachment Link)

(Attachment Link)

That is so awesome. Although I do find it hilariously ironic that you chose to put a 40% board in such a massive case

noisyturtle · « **Reply #8803 on:** Mon, 09 March 2015, 21:20:09 »

someday I'll have a better camera

Badwrench · « **Reply #8804 on:** Mon, 09 March 2015, 21:43:27 »

Quote from: bueller on Mon, 09 March 2015, 20:47:10

Quote from: Badwrench on Sun, 01 March 2015, 23:06:38
Built a case/wrist rest for the JD40 today. Wood is Purple heart and is finished with Tung Oil and then waxed. The mounting area is routed out so that the bottom is solid. I still need to get the correct hardware to mount the top plate and a small enough drill bit for said screws, but overall, I am happy with it.

(Attachment Link)

(Attachment Link)

That is so awesome. Although I do find it hilariously ironic that you chose to put a 40% board in such a massive case

Thanks. It is actually roughly the width of a 60%. I measured the distance of my wrists when comfortably resting on a normal tkl and added a little to that for the actual case. It looks bigger in the photos than it actually is due to the small size of the JD40. The next one I do will be a little narrower and shorter on the depth as well.

rowdy · « **Reply #8805 on:** Tue, 10 March 2015, 04:59:51 »

Quote from: Touch_It on Mon, 09 March 2015, 20:34:16

Show Image

White double shot keycaps to my Dell AT101W. Also will be swapping the black alps for Matias click switches painting the plate. Thinking about painting the outside of the case.

What happened to \| ? :p

ApocalypseMaow · « **Reply #8806 on:** Thu, 12 March 2015, 03:18:30 »

Put the Dolch set back on the dolch board... Sad cause it doesn't work

Sure looks nice sitting on the shelf doh!

)

VesperSAINT · « **Reply #8807 on:** Thu, 12 March 2015, 04:55:28 »

Quote from: ApocalypseMaow on Thu, 12 March 2015, 03:18:30

Put the Dolch set back on the dolch board... Sad cause it doesn't work

Sure looks nice sitting on the shelf doh! )
Show Image

FFFFFFFFFFUUUUUUUUUUUUUUUUUUUUU- WHY WON'T YOU JUST GIVE IT TO ME?!

So good, yo~ I just want to add my CMYW to it~~~

Lol~

rowdy · « **Reply #8808 on:** Thu, 12 March 2015, 04:58:23 »

Quote from: ApocalypseMaow on Thu, 12 March 2015, 03:18:30

Put the Dolch set back on the dolch board... Sad cause it doesn't work

Sure looks nice sitting on the shelf doh! )
Show Image

A Dolch set on a Dolch board
And a partridge in a pear tree.
lalala

Karura · « **Reply #8809 on:** Fri, 13 March 2015, 22:41:21 »

Poker with Beast Plate and Hammer Case.

VesperSAINT · « **Reply #8810 on:** Fri, 13 March 2015, 22:47:20 »

Quote from: Karura on Fri, 13 March 2015, 22:41:21

Poker with Beast Plate and Hammer Case.

Show Image

Splendid keyboard!!! So very very clean. I tend to forget how beautiful blue stems look~

Karura · « **Reply #8811 on:** Fri, 13 March 2015, 22:57:28 »

Thank you!

Just threw on some caps. Gotta go salvage a capslock and spacebar from another set

Touch_It · « **Reply #8812 on:** Fri, 13 March 2015, 23:01:20 »

Quote from: rowdy on Tue, 10 March 2015, 04:59:51

Quote from: Touch_It on Mon, 09 March 2015, 20:34:16
Show Image

White double shot keycaps to my Dell AT101W. Also will be swapping the black alps for Matias click switches painting the plate. Thinking about painting the outside of the case.

What happened to \| ? :p

Donor board has a big ass enter thus 1x \|.

#thug life.

Edit. Not sure why I said the outside of the case vs case but w/e. Lol

VesperSAINT · « **Reply #8813 on:** Fri, 13 March 2015, 23:24:34 »

Quote from: Karura on Fri, 13 March 2015, 22:57:28

Thank you!

Just threw on some caps. Gotta go salvage a capslock and spacebar from another set

Show Image

Oh nooo~ I hope you find them. I like the theme you're going for on this one. Just so clean, dood. I really should go for a cleaner look for one my MX boards, but I get carried away with color and legends :P I keep my Topre boards for the clean blank look~

CPTBadAss · « **Reply #8814 on:** Fri, 13 March 2015, 23:28:04 »

Quote from: Badwrench on Sun, 01 March 2015, 23:06:38

Built a case/wrist rest for the JD40 today. Wood is Purple heart and is finished with Tung Oil and then waxed. The mounting area is routed out so that the bottom is solid. I still need to get the correct hardware to mount the top plate and a small enough drill bit for said screws, but overall, I am happy with it.

(Attachment Link)

(Attachment Link)

That's really hot. More pictures of this please

Badwrench · « **Reply #8815 on:** Sat, 14 March 2015, 02:23:58 »

Quote from: CPTBadAss on Fri, 13 March 2015, 23:28:04

Quote from: Badwrench on Sun, 01 March 2015, 23:06:38
Built a case/wrist rest for the JD40 today. Wood is Purple heart and is finished with Tung Oil and then waxed. The mounting area is routed out so that the bottom is solid. I still need to get the correct hardware to mount the top plate and a small enough drill bit for said screws, but overall, I am happy with it.

(Attachment Link)

(Attachment Link)

That's really hot. More pictures of this please

Thanks. Just for you

I will try to get some better pictures over the weekend. I left the wood near the window to help with the aging and it is now a bit more purple. I also added another couple coats of wax to get the color even deeper.

Edit: Took some pictures outside this morning to better show the colors. Picture above is a bit washed out, but these new ones are a touch warm. Someday I will learn to take better photos.

Prelim · « **Reply #8816 on:** Mon, 16 March 2015, 06:32:37 »

Quote from: Karura on Fri, 13 March 2015, 22:57:28

Thank you!

Just threw on some caps. Gotta go salvage a capslock and spacebar from another set

Show Image

are those Cherry POMs? where did you got it?

bianco · « **Reply #8817 on:** Tue, 17 March 2015, 05:45:21 »

decided to assemble and use the butterfly/lightpad

Vibex · « **Reply #8818 on:** Sat, 21 March 2015, 12:05:33 »

Quote from: Badwrench on Sat, 14 March 2015, 02:23:58

Quote from: CPTBadAss on Fri, 13 March 2015, 23:28:04
Quote from: Badwrench on Sun, 01 March 2015, 23:06:38
Built a case/wrist rest for the JD40 today. Wood is Purple heart and is finished with Tung Oil and then waxed. The mounting area is routed out so that the bottom is solid. I still need to get the correct hardware to mount the top plate and a small enough drill bit for said screws, but overall, I am happy with it.

(Attachment Link)

(Attachment Link)

That's really hot. More pictures of this please

Thanks. Just for you
(Attachment Link)

I will try to get some better pictures over the weekend. I left the wood near the window to help with the aging and it is now a bit more purple. I also added another couple coats of wax to get the color even deeper.

Edit: Took some pictures outside this morning to better show the colors. Picture above is a bit washed out, but these new ones are a touch warm. Someday I will learn to take better photos.

(Attachment Link)

(Attachment Link)

(Attachment Link)

Oh my god, that is simply stunning. I wish I could make stuff like that.

user 18 · « **Reply #8819 on:** Sat, 21 March 2015, 13:31:30 »

Quote from: Badwrench on Sat, 14 March 2015, 02:23:58

Quote from: CPTBadAss on Fri, 13 March 2015, 23:28:04
Quote from: Badwrench on Sun, 01 March 2015, 23:06:38
Built a case/wrist rest for the JD40 today. Wood is Purple heart and is finished with Tung Oil and then waxed. The mounting area is routed out so that the bottom is solid. I still need to get the correct hardware to mount the top plate and a small enough drill bit for said screws, but overall, I am happy with it.

(Attachment Link)

(Attachment Link)

That's really hot. More pictures of this please

Thanks. Just for you
(Attachment Link)

I will try to get some better pictures over the weekend. I left the wood near the window to help with the aging and it is now a bit more purple. I also added another couple coats of wax to get the color even deeper.

Edit: Took some pictures outside this morning to better show the colors. Picture above is a bit washed out, but these new ones are a touch warm. Someday I will learn to take better photos.

(Attachment Link)

(Attachment Link)

(Attachment Link)

That is one dead sexy board

JaccoW · « **Reply #8820 on:** Sat, 21 March 2015, 13:49:49 »

Quote from: bianco on Tue, 17 March 2015, 05:45:21

decided to assemble and use the butterfly/lightpad

Show Image

Jelly of the lightpad.

osi · « **Reply #8821 on:** Wed, 25 March 2015, 19:47:41 »

tigersharkdude · « **Reply #8822 on:** Wed, 25 March 2015, 21:17:23 »

a Yag Dur from Nubbinator

ctm · « **Reply #8823 on:** Wed, 25 March 2015, 21:28:42 »

Just added a customized keycap from WASD.

Fullcream · « **Reply #8824 on:** Fri, 27 March 2015, 17:21:16 »

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

HPE1000 · « **Reply #8825 on:** Fri, 27 March 2015, 17:33:15 »

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

I really like it, great job!

HoffmanMyster · « **Reply #8826 on:** Fri, 27 March 2015, 17:41:16 »

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

Nice job! Goes really well with the Nuclear Data set.

ideus · « **Reply #8827 on:** Fri, 27 March 2015, 18:10:27 »

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

Oh gosh, this looks super retro. Nice job.

fanpeople · « **Reply #8828 on:** Fri, 27 March 2015, 19:09:28 »

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

I'm going to chime in also, that looks awesome. By average you mean AWESOME.

nathanrosspowell · « **Reply #8829 on:** Fri, 27 March 2015, 19:53:00 »

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

Fallout bunker status: CONFIRMED

Fullcream · « **Reply #8830 on:** Fri, 27 March 2015, 21:19:03 »

Haha. Retro is what I was going for. Pleased with how heavy and solid it is.
I mean it's very average in that, overall it turned out how I planned but I underestimated how easily the 1.5mm wall sheet would bow under the heat from welding. Pictures won't really show that well but there is slight bowing on a couple of faces.

sethk_ · « **Reply #8831 on:** Sat, 28 March 2015, 10:49:18 »

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

That has an interesting industrial look to it, I like it

Sifo · « **Reply #8832 on:** Sat, 28 March 2015, 16:11:42 »

Thanks Shadovved and LastPilot

mr.squishy · « **Reply #8833 on:** Sat, 28 March 2015, 18:51:15 »

A sick paint job

rowdy · « **Reply #8834 on:** Sun, 29 March 2015, 01:33:25 »

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

Excellent job!

That really captures the essence of the old style keycap set

rowdy · « **Reply #8835 on:** Sun, 29 March 2015, 02:22:47 »

I am gradually completing my second full size Model M, although it does need a bolt mod at some stage.

A couple more keycaps added, before and after ...

Interesting Tab key - it has only one arrow and no word, the Tab key on my other two have two opposite direction arrows and the word Tab on their Tab keys. Anyone else seen that?

meow a cat · « **Reply #8836 on:** Thu, 02 April 2015, 01:21:56 »

Quote from: rowdy on Sun, 29 March 2015, 02:22:47

I am gradually completing my second full size Model M, although it does need a bolt mod at some stage.

A couple more keycaps added, before and after ...

(Attachment Link)

(Attachment Link)

Interesting Tab key - it has only one arrow and no word, the Tab key on my other two have two opposite direction arrows and the word Tab on their Tab keys. Anyone else seen that?

Both of my boards have the regular one with two arrows and 'tab'.

This Model F Unsaver has something similar to yours:

More

katushkin · « **Reply #8837 on:** Thu, 02 April 2015, 08:42:27 »

Quote from: tigersharkdude on Wed, 25 March 2015, 21:17:23

a Yag Dur from Nubbinator

Show Image

Show Image

I want mine

It looks great.

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

That looks awesome. I wish my plasti dip skills were that good!

ApocalypseMaow · « **Reply #8838 on:** Thu, 02 April 2015, 08:56:34 »

suffer

baldgye · « **Reply #8839 on:** Thu, 02 April 2015, 09:01:32 »

Quote from: ApocalypseMaow on Thu, 02 April 2015, 08:56:34

suffer
Show Image

DAMN MATE THAT LOOKS AWESOME

rowdy · « **Reply #8840 on:** Fri, 03 April 2015, 02:33:56 »

Quote from: meow a cat on Thu, 02 April 2015, 01:21:56

Quote from: rowdy on Sun, 29 March 2015, 02:22:47
I am gradually completing my second full size Model M, although it does need a bolt mod at some stage.

A couple more keycaps added, before and after ...

(Attachment Link)

(Attachment Link)

Interesting Tab key - it has only one arrow and no word, the Tab key on my other two have two opposite direction arrows and the word Tab on their Tab keys. Anyone else seen that?

Both of my boards have the regular one with two arrows and 'tab'.

This Model F Unsaver has something similar to yours:

More
Show Image

That does look similar! Keycaps swapped all over the place - it doesn't bother me, just something slightly different :)

HPE1000 · « **Reply #8841 on:** Tue, 07 April 2015, 15:43:09 »

Added a teensy. Vintage tee mount green alps too good

Kinda large though.

Baron Von Clop · « **Reply #8842 on:** Tue, 07 April 2015, 17:33:49 »

A paint job and keyset.

It was tough finding keys the right shade of purple for something that wasn't a crazy price. These still aren't really dark enough for what I wanted, but they will work well enough.

Just waiting for my custom keys to come in from WASD now. They shipped today!

do_Og@n · « **Reply #8843 on:** Thu, 09 April 2015, 20:30:25 »

Quote from: Baron Von Clop on Tue, 07 April 2015, 17:33:49

A paint job and keyset.

Show Image

It was tough finding keys the right shade of purple for something that wasn't a crazy price. These still aren't really dark enough for what I wanted, but they will work well enough.

Just waiting for my custom keys to come in from WASD now. They shipped today!

In the following thread you will find a very light purple set of keycaps....is this more of the color you were looking for?

https://geekhack.org/index.php?topic=37999.0

fanpeople · « **Reply #8844 on:** Fri, 17 April 2015, 22:01:31 »

Replaced alt with a code key. Used a spare stem to help stabilise and reverse bent a wire stabiliser for space bar. It is far from perfect but is working quite good, a bit stiff though. also killed right alt with Sharpkeys

More

More

More

More

I finally have enough random Model M stuff to start playing around.

CPTBadAss · « **Reply #8845 on:** Fri, 17 April 2015, 22:04:09 »

Quote from: Fullcream on Fri, 27 March 2015, 17:21:16

Built a very average case for my Pure out of 1.5mm Mild steel sheet and coated with Plasti Dip.

Show Image

Show Image

PLEASE TELL ME YOU HAVE A BUILD LOG FOR THIS. I'm way into this <3. Great job!!

retrochick · « **Reply #8846 on:** Mon, 20 April 2015, 10:48:17 »

Quote from: Baron Von Clop on Tue, 07 April 2015, 17:33:49

A paint job and keyset.

Show Image

It was tough finding keys the right shade of purple for something that wasn't a crazy price. These still aren't really dark enough for what I wanted, but they will work well enough.

Just waiting for my custom keys to come in from WASD now. They shipped today!

That's actually a very pleasing lavender for me. Nicely done! What paint did you use for the case? Looking to mod my QFR soon.

jil_jil32 · « **Reply #8847 on:** Tue, 21 April 2015, 04:12:03 »

White Valentine DSA keyset

baldgye · « **Reply #8848 on:** Tue, 21 April 2015, 04:28:00 »

Quote from: jil_jil32 on Tue, 21 April 2015, 04:12:03

Show Image

White Valentine DSA keyset

wow that looks awesome

naasfu · « **Reply #8849 on:** Tue, 21 April 2015, 20:19:23 »

cherry doubleshots in german layout.

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: What did you add to your Keyboard today? - Post Your Pics (Read 4580673 times)