Author Topic: [IC] Argyle - 60% Through-hole Keyboard (GB Starts 2/19) (Read 192674 times)

Agent Ice · « **Reply #200 on:** Thu, 04 February 2021, 21:05:32 »

Quote from: Seoulcialite on Tue, 02 February 2021, 22:07:53

March would probably be a better estimate. Tweaks to the case has been made and a prototype will be made after CNY.

As for kitting, most likely a universal plate will be kitted as part of the base purchase and PCB colors will be able to be chosen.

Oh boy, oh boy....now I need to start looking at different keycap sets. Which of the colors are looking to be in the finalized product? And uhh....I'm not going to look for an exact quote on the kit, but I am interested to get a rough over/under on how much my wallet will be crying.

Groom · « **Reply #201 on:** Fri, 05 February 2021, 11:48:57 »

love the silver version, two side looks so cool

LaserCrafter · « **Reply #202 on:** Mon, 08 February 2021, 04:17:50 »

exposed electronic look>>>>>>, but seriously, thanks for through hole kits! GLWIC

Alejo1707 · « **Reply #203 on:** Mon, 15 February 2021, 12:49:44 »

Wish it would support split space bars

Vibex · « **Reply #204 on:** Mon, 15 February 2021, 13:30:49 »

Quote from: Alejo1707 on Mon, 15 February 2021, 12:49:44

Wish it would support split space bars

+1 to this

Every keyboard should support split space bars imo. Yeah it can cause a lot of "extra" holes in the plate, but I would rather have multiple plates to solve that issue.

Tastenplatte · « **Reply #205 on:** Mon, 15 February 2021, 14:49:14 »

Looks amazing, looking forward to a price estimate.

LubedHealios · « **Reply #206 on:** Thu, 18 February 2021, 19:50:15 »

Been looking a this for a while now, and i hope i can get my hands on one.
Especially if it had a argyle-less pcb but ill have to live with it i guess.

GLWGB and keep up the great work

DeMechanica · « **Reply #207 on:** Thu, 18 February 2021, 22:01:05 »

Keen if it has split space!

Rx003 · « **Reply #208 on:** Fri, 19 February 2021, 03:25:43 »

This looks hella clean will consider! Good luck with this and I wish you all the best!

iamtienng · « **Reply #209 on:** Fri, 19 February 2021, 13:06:34 »

sneakysnek · « **Reply #210 on:** Sat, 20 February 2021, 01:21:47 »

loving the colours and that it looks so classy. will defo see the price when it comes out

rmllew · « **Reply #211 on:** Mon, 22 February 2021, 23:49:17 »

Love this design and look. Holding out for 65% v2 if you ever get to that. Best of luck!!!

FishyKeebs · « **Reply #212 on:** Wed, 24 February 2021, 09:27:19 »

Looks amazing! Might be out of my price range but I would certainly love to get this!

shima · « **Reply #213 on:** Thu, 25 February 2021, 12:44:33 »

this board is pretty interesting but im kinda sad that this hasn't been updated in a while. if this every comes to gb, best believe that i'm hopping on it! hope to see more updates soon for argyle!

yukiburzm · « **Reply #214 on:** Thu, 25 February 2021, 12:47:16 »

noice!

shima · « **Reply #215 on:** Sat, 27 February 2021, 10:15:28 »

also i was wondering if a discord server was going to be made for argyle soon. if possible, i'd just like a place to talk about this board and what other projects you can bring into the future after argyle

yukiburzm · « **Reply #216 on:** Mon, 01 March 2021, 01:44:10 »

I'm waiting for the Mercutio, but I literally cannot wait to hear more news about this board.

Hopefully its in the 80-150$ price range, but if I must, I must.

Jae-3soteric · « **Reply #217 on:** Mon, 01 March 2021, 03:29:21 »

Hey folks,

Just a quick update. Argyle is till in progress, following the build stream a few weeks ago we wanted to do one more revision of prototyping. This is currently in manufacturing but was delayed due to CNY. Once we get the final board in a few weeks Seoulcialite and I will provide more details on the GB.

Quote from: yukiburzm on Mon, 01 March 2021, 01:44:10

I'm waiting for the Mercutio, but I literally cannot wait to hear more news about this board.

Hopefully its in the 80-150$ price range, but if I must, I must.

Sadly I can guarantee it will not be in this price range. Whilst we will endeavour to make it as affordable as we can, this is still a fully CNC machined case, with some complex geometries for window fitment etc. This can't be produced in a good enough quality at a price point as low as some lasercut acrylic cases.

That being said we will do a PCB only option in some form I'm sure for those that like the Gingham / Mysterium style choices which should be in that price range.

Quote from: shima on Sat, 27 February 2021, 10:15:28

also i was wondering if a discord server was going to be made for argyle soon. if possible, i'd just like a place to talk about this board and what other projects you can bring into the future after argyle

I dont believe Seoulcialite has a discord server, but you can always drop in for a chat on the prototypist server (link at top of page at prototypist.net)

yukiburzm · « **Reply #218 on:** Mon, 01 March 2021, 14:14:11 »

Sweet! Thanks for the reply! It's awesome that you also plan on having the pcb/budget option as well! Totally understandable that it would cost more than that, and tbh, I'll most likely buy the main kit for myself and the budget for a friend

Bobatype · « **Reply #219 on:** Mon, 01 March 2021, 23:49:19 »

Just some unofficial renders featuring KAT Great Wave, and the Wave (Seigaiha) deskmat to show off this gorgeous board.

TjarleN · « **Reply #220 on:** Tue, 02 March 2021, 00:23:10 »

Quote from: bobasweatandtears on Mon, 01 March 2021, 23:49:19

Just some unofficial renders featuring KAT Great Wave, and the Wave (Seigaiha) deskmat to show off this gorgeous board.

Show Image

Show Image

Show Image

Show Image

Uhh, WKL is so attractive thanks for making it even harder to decide on layouts

Capptie · « **Reply #221 on:** Tue, 02 March 2021, 05:02:14 »

I've been following this IC for quite some time now and just wanted to say it looks like an amazing board and is definitely on my buy list when it comes out. I'm happy you guys are taking your time with getting this board properly tested and keep it up.

InvXXVII · « **Reply #222 on:** Tue, 02 March 2021, 13:21:43 »

Can someone ELI5 what through hole technology is? I did research on thru hole vs standard pcb and still don't understand.

Lord_Rabel · « **Reply #223 on:** Tue, 02 March 2021, 14:03:01 »

Quote from: InvXXVII on Tue, 02 March 2021, 13:21:43

Can someone ELI5 what through hole technology is? I did research on thru hole vs standard pcb and still don't understand.

The PCB has holes, and you have can hand solder the components much easier. Many PCBs have SMD components, which are easy for a pick and place machine, but through hole soldering is way more fun doing it by hand. It is just the extra step DIY to say it short. (However many machine-assembled PCB still have TH parts, but I think you get the point)

InvXXVII · « **Reply #224 on:** Tue, 02 March 2021, 16:57:21 »

Quote from: Lord_Rabel on Tue, 02 March 2021, 14:03:01

Quote from: InvXXVII on Tue, 02 March 2021, 13:21:43
Can someone ELI5 what through hole technology is? I did research on thru hole vs standard pcb and still don't understand.

The PCB has holes, and you have can hand solder the components much easier. Many PCBs have SMD components, which are easy for a pick and place machine, but through hole soldering is way more fun doing it by hand. It is just the extra step DIY to say it short. (However many machine-assembled PCB still have TH parts, but I think you get the point)

I see. Hence the PCB's bigger footprint right? Because components are soldered on individually instead of "printed/soldered" to the surface of the board? (btw, sick keyboard in your signature)

Lord_Rabel · « **Reply #225 on:** Wed, 03 March 2021, 01:05:28 »

Quote from: InvXXVII on Tue, 02 March 2021, 16:57:21

I see. Hence the PCB's bigger footprint right? Because components are soldered on individually instead of "printed/soldered" to the surface of the board? (btw, sick keyboard in your signature)

Exactly. The Discipline65 and Mysterium TKL by coseyfrutti have a similar approach

SpenceFence · « **Reply #226 on:** Mon, 08 March 2021, 20:17:25 »

Any updates on this board? Im on pins and needles, cant wait for any news <3

kioskhill45 · « **Reply #227 on:** Tue, 16 March 2021, 01:02:51 »

Quote from: Seoulcialite on Tue, 02 February 2021, 22:07:53

Quote from: Agent Ice on Sun, 31 January 2021, 21:42:39
I'm very excited for this keeb! Jae on the stream said the GB might be shooting for late February. Is this accurate-ish? I might've just been hallucinating since I was very tired.

Also, when the GB goes live, will we be able to mix and match the colors of cases with PCBs, or will they be sold as kitted units?

March would probably be a better estimate. Tweaks to the case has been made and a prototype will be made after CNY.

As for kitting, most likely a universal plate will be kitted as part of the base purchase and PCB colors will be able to be chosen.

Well, we're halfway through march, so I think its a safe time to ask, are you still shooting for a GB this month?

kioskhill45 · « **Reply #228 on:** Thu, 01 April 2021, 01:29:24 »

NOW it's safe to say that it won't be happening in March.
Sorry for being impatient, but I really would love some updates or anything about this.

Seoulcialite · « **Reply #229 on:** Thu, 01 April 2021, 07:00:41 »

Quote from: kioskhill45 on Thu, 01 April 2021, 01:29:24

NOW it's safe to say that it won't be happening in March.
Sorry for being impatient, but I really would love some updates or anything about this.

We're at the mercy of the manu unfortunately. We are still waiting for the 2nd prototype but ready to go full speed once we confirm it is satisfactory.

kioskhill45 · « **Reply #230 on:** Thu, 01 April 2021, 13:00:09 »

Quote from: Seoulcialite on Thu, 01 April 2021, 07:00:41

Quote from: kioskhill45 on Thu, 01 April 2021, 01:29:24
NOW it's safe to say that it won't be happening in March.
Sorry for being impatient, but I really would love some updates or anything about this.

We're at the mercy of the manu unfortunately. We are still waiting for the 2nd prototype but ready to go full speed once we confirm it is satisfactory.

Well that's all I needed to hear. Thanks for the update!

dimo · « **Reply #231 on:** Thu, 01 April 2021, 17:45:22 »

Quote from: GarrettSucks on Fri, 08 May 2020, 20:18:14

This idea is really cool. But I don’t think you should have argyle on the PCB. It really forces a distinct design style to the board that will clash with tons of keyset styles.

this. get rid of it

Extra Fox · « **Reply #232 on:** Thu, 01 April 2021, 21:56:58 »

As a counterpoint on the PCB design; the argyle goes with the theme, the backside engraving, and it's printed in white. So I'm personally a fan of this and hope it makes it to final production.

I'll have no problem finding a keyset to run on this.

PuddingPug · « **Reply #233 on:** Fri, 02 April 2021, 01:44:46 »

Love the design! Looking forward to this!

shima · « **Reply #234 on:** Fri, 02 April 2021, 19:08:06 »

Quote from: Seoulcialite on Thu, 01 April 2021, 07:00:41

Quote from: kioskhill45 on Thu, 01 April 2021, 01:29:24
NOW it's safe to say that it won't be happening in March.
Sorry for being impatient, but I really would love some updates or anything about this.

We're at the mercy of the manu unfortunately. We are still waiting for the 2nd prototype but ready to go full speed once we confirm it is satisfactory.

What's the new ETA for argyle now? also i kinda agree with removing the argyle design on the pcb. it ruins the simplicity of the keysets. still rooting for argyle to go into gb tho!
GLHF

Starius · « **Reply #235 on:** Mon, 05 April 2021, 09:06:24 »

For what it’s worth, I love the argyle pattern on the PCB.
The more unique distinctiveness a keyboard has, the better.
Once you start taking those elements away they all start looking the same.

Zanhana · « **Reply #236 on:** Fri, 16 April 2021, 18:05:03 »

Will it be possible to use o-rings to burger mount the plate? It would be really nice if the case could accommodate this. Additionally, is there any chance of seeing the plate design/where the mounting points will be?

As for the PCB, I'll echo what others have said—split space support would be excellent.

Looking forward to the next proto, hope it goes well!

Extra Fox · « **Reply #237 on:** Wed, 21 April 2021, 00:52:50 »

Signed up.

Benedikt · « **Reply #238 on:** Sun, 25 April 2021, 09:30:42 »

Quote from: Seoulcialite on Fri, 13 November 2020, 14:46:51

Show Image

This looks sexy as hell

Seoulcialite · « **Reply #239 on:** Tue, 04 May 2021, 14:14:33 »

Quote from: shima on Fri, 02 April 2021, 19:08:06

What's the new ETA for argyle now? also i kinda agree with removing the argyle design on the pcb. it ruins the simplicity of the keysets. still rooting for argyle to go into gb tho!
GLHF

No new ETA for now but the 2nd prototype is on its way to Jae right now.

♾Ḋḯṩⱥṩẗḝṟ · « **Reply #240 on:** Wed, 05 May 2021, 06:04:20 »

Quote from: Seoulcialite on Tue, 04 May 2021, 14:14:33

No new ETA for now but the 2nd prototype is on its way to Jae right now.

Does he plan to build it on stream?

notquant · « **Reply #241 on:** Sun, 09 May 2021, 16:56:46 »

Do you have a discord server where you post updates or should I tuned on this GH thread?

♾Ḋḯṩⱥṩẗḝṟ · « **Reply #242 on:** Mon, 10 May 2021, 01:10:46 »

Quote from: notquant on Sun, 09 May 2021, 16:56:46

Do you have a discord server where you post updates or should I tuned on this GH thread?

No, I don't think Seoulcialite does have a Discord at the moment. I'm watching the thread every morning, can give you a shout if something happens

notquant · « **Reply #243 on:** Mon, 10 May 2021, 12:19:35 »

Quote from: ♾Ḋḯṩⱥṩẗḝṟ on Mon, 10 May 2021, 01:10:46

Quote from: notquant on Sun, 09 May 2021, 16:56:46
Do you have a discord server where you post updates or should I tuned on this GH thread?

No, I don't think Seoulcialite does have a Discord at the moment. I'm watching the thread every morning, can give you a shout if something happens

I'm just new to using GH but am glad to check it regularly for this fantastic project. Thanks for offering regardless ahahahaha.

charlie_kabe · « **Reply #244 on:** Tue, 11 May 2021, 19:19:59 »

I love this, pls give interesting colors for cases, maroon? dark green? yellow? just something different please

Gavzers · « **Reply #245 on:** Tue, 11 May 2021, 22:53:30 »

Quote from: charlie_kabe on Tue, 11 May 2021, 19:19:59

I love this, pls give interesting colors for cases, maroon? dark green? yellow? just something different please

I'd have to disagree. I think the design is very refined, and might look a bit childish or silly with extravagant colors. I think a black, silver, dark grey, or navy blue would be amazing colors for this board.

Lel · « **Reply #246 on:** Sat, 15 May 2021, 03:22:34 »

Just came across this board over at KAT Love's GB. Really aesthetic. Somewhat happy I did not miss this GB. Looking forward to see where it goes.

guy0naBuffal0 · « **Reply #247 on:** Sun, 30 May 2021, 11:54:44 »

Love this design and wish you would bring back the red color from the early mockups!

steelykeeb · « **Reply #248 on:** Thu, 01 July 2021, 04:29:13 »

is the project dead or something? its been a while since the last update on gh

Friendship · « **Reply #249 on:** Thu, 01 July 2021, 11:49:02 »

hopefully this project is still in the works! it looks rad!

News:

Author Topic: [IC] Argyle - 60% Through-hole Keyboard (GB Starts 2/19) (Read 192674 times)