Author Topic: Phantom PLATES (shipping) (Read 89881 times)

jabar · « **Reply #50 on:** Sat, 19 January 2013, 23:11:07 »

I see prices are now $23, does that now include shipping?

TheProfosist · « **Reply #51 on:** Sat, 19 January 2013, 23:12:39 »

Quote from: jabar on Sat, 19 January 2013, 23:11:07

I see prices are now $23, does that now include shipping?

oops ill change that that was before the lates update my bad and thanks for catching that.

Edit: form updated/fixed

xavierblak · « **Reply #52 on:** Sun, 20 January 2013, 00:20:29 »

No 7bit plate option?

jabar · « **Reply #53 on:** Sun, 20 January 2013, 00:26:20 »

Quote from: xavierblak on Sun, 20 January 2013, 00:20:29

No 7bit plate option?

I asked the same previously; its disappearance is due to its lack of practicality, and requiring a new special keycap groupbuy (see the caveat of the current custom plates).

TheProfosist · « **Reply #54 on:** Sun, 20 January 2013, 00:34:41 »

idk if you think you can find buys for 15 7bit plates send WFD a PM

The_Beast · « **Reply #55 on:** Sun, 20 January 2013, 00:40:05 »

I could do small quantities, but it will be more than $22 (I'm guessing ~$27) and take more time

TheProfosist · « **Reply #56 on:** Sun, 20 January 2013, 00:41:13 »

Quote from: The_Beast on Sun, 20 January 2013, 00:40:05

I could do small quantities, but it will be more than $22 (I'm guessing ~$27) and take more time

thats a great idea!

TheQsanity · « **Reply #57 on:** Sun, 20 January 2013, 04:14:32 »

Mh, plates.

Matt3o · « **Reply #58 on:** Sun, 20 January 2013, 05:42:05 »

placed my order here, if I get it right previous plate orders to Prof were waved

esoomenona · « **Reply #59 on:** Sun, 20 January 2013, 06:40:24 »

WFD, you're making custom Costar 7x bars?

Sai · « **Reply #60 on:** Sun, 20 January 2013, 06:48:16 »

ordered 1x ANS150 !

Dgsbllx · « **Reply #61 on:** Sun, 20 January 2013, 06:53:31 »

How much is shipping to the UK on these?

rindorbrot · « **Reply #62 on:** Sun, 20 January 2013, 07:19:01 »

Quote from: The_Beast on Sun, 20 January 2013, 00:40:05

I could do small quantities, but it will be more than $22 (I'm guessing ~$27) and take more time

That would be awesome!

Still tried ordering 1x RBD150

dirge · « **Reply #63 on:** Sun, 20 January 2013, 07:35:25 »

ordered both iso plates, a profist plate with iso enter would have been nice.

korne · « **Reply #64 on:** Sun, 20 January 2013, 10:41:19 »

Quote from: esoomenona on Sun, 20 January 2013, 06:40:24

WFD, you're making custom Costar 7x bars?

I need some of those also, are you adding them on the form?

t2russo · « **Reply #65 on:** Sun, 20 January 2013, 11:35:10 »

Order placed!

samwisekoi · « **Reply #66 on:** Sun, 20 January 2013, 12:10:29 »

Ordered the WFD 125. Nice Layout!

- Ron | samwisekoi

korne · « **Reply #67 on:** Sun, 20 January 2013, 12:20:44 »

Ordered 2 ISO plates + 1 ANSI 125

daerid · « **Reply #68 on:** Sun, 20 January 2013, 12:49:11 »

Ordered.

TheProfosist · « **Reply #69 on:** Sun, 20 January 2013, 13:19:37 »

Quote from: korne on Sun, 20 January 2013, 10:41:19

Quote from: esoomenona on Sun, 20 January 2013, 06:40:24
WFD, you're making custom Costar 7x bars?

I need some of those also, are you adding them on the form?

WFD is going to get back to me on if he acn bend them and if he can how easy and or time consuming it is to do. Once he lets me know for sure ill add it to my form.

esoomenona · « **Reply #70 on:** Sun, 20 January 2013, 13:21:25 »

Might you PM me if they are added, Prof?

TheProfosist · « **Reply #71 on:** Sun, 20 January 2013, 13:25:38 »

Quote from: esoomenona on Sun, 20 January 2013, 13:21:25

Might you PM me if they are added, Prof?

i can try to remember but as always there will be an update in my so if you havnt already notifiess/subscribed i suggest it

metafour · « **Reply #72 on:** Sun, 20 January 2013, 13:34:03 »

Quote from: TheProfosist on Sat, 19 January 2013, 20:01:53

Quote from: Soulpyre on Sat, 19 January 2013, 19:44:02
I'm also confused about ordering plates. If we order from WFD here, will the plates be shipped to TheProfosist, and then shipped from him to us? And are the ANSI 125/150 plates going to be the same price regardless of who we buy them from?
dont buy any from me those will be canceled i will be sending something about that soon

Were you still planning on doing this? If WFD is willing to deal with shipping plates out to those who are not getting assembly done by someone else I'd rather just get my plate and wires directly from him and source the stabilizers from somewhere. I really see no reason to have a plate and wires sent to you just because I'm getting a set of stabilizers from you. Especially if the stabilizers can be purchased directly from somewhere.

TheProfosist · « **Reply #73 on:** Sun, 20 January 2013, 13:39:42 »

Quote from: metafour on Sun, 20 January 2013, 13:34:03

Quote from: TheProfosist on Sat, 19 January 2013, 20:01:53
Quote from: Soulpyre on Sat, 19 January 2013, 19:44:02
I'm also confused about ordering plates. If we order from WFD here, will the plates be shipped to TheProfosist, and then shipped from him to us? And are the ANSI 125/150 plates going to be the same price regardless of who we buy them from?
dont buy any from me those will be canceled i will be sending something about that soon

Were you still planning on doing this? If WFD is willing to deal with shipping plates out to those who are not getting assembly done by someone else I'd rather just get my plate and wires directly from him and source the stabilizers from somewhere. I really see no reason to have a plate and wires sent to you just because I'm getting a set of stabilizers from you. Especially if the stabilizers can be purchased directly from somewhere.

no this was not planned. I am sorry that this mess happened and will be getting pm/email updates out today. You can do whatever you wish to do. I only allowed/added just parts to be ordered from my GB because thats what people were asking for. This was because they didnt want to go out and find all the parts separately themselves and would rather have someone else do the work and have it shipped direct to them with exactly what they were looking for.

metafour · « **Reply #74 on:** Sun, 20 January 2013, 13:50:35 »

Quote from: TheProfosist on Sun, 20 January 2013, 13:39:42

Quote from: metafour on Sun, 20 January 2013, 13:34:03
Quote from: TheProfosist on Sat, 19 January 2013, 20:01:53
Quote from: Soulpyre on Sat, 19 January 2013, 19:44:02
I'm also confused about ordering plates. If we order from WFD here, will the plates be shipped to TheProfosist, and then shipped from him to us? And are the ANSI 125/150 plates going to be the same price regardless of who we buy them from?
dont buy any from me those will be canceled i will be sending something about that soon

Were you still planning on doing this? If WFD is willing to deal with shipping plates out to those who are not getting assembly done by someone else I'd rather just get my plate and wires directly from him and source the stabilizers from somewhere. I really see no reason to have a plate and wires sent to you just because I'm getting a set of stabilizers from you. Especially if the stabilizers can be purchased directly from somewhere.
no this was not planned. I am sorry that this mess happened and will be getting pm/email updates out today. You can do whatever you wish to do. I only allowed/added just parts to be ordered from my GB because thats what people were asking for. This was because they didnt want to go out and find all the parts separately themselves and would rather have someone else do the work and have it shipped direct to them with exactly what they were looking for.

I can understand that some people just want their keyboard built for them or just a package of parts so that they can build it themselves. Where my concern is coming from is when I inquired about getting the parts myself you said I should just order them from your group buy. I think all this information about the parts needed and where to get them from should be consolidated somewhere and placed out in the open so people can make their own decision about whether to get them from you or individually on their own. If everyone orders everything from you and you get overwhelmed with it people may have to wait for items they could have purchased on their own and received sooner.

BimboBB · « **Reply #75 on:** Sun, 20 January 2013, 15:26:53 »

@Prof & WFD

are you still going to send yr both stuff together or will it be shipped separated (parts/plates)?

Jupiter · « **Reply #76 on:** Sun, 20 January 2013, 16:15:49 »

Submitted form yesterday but with ANS150 instead of ANS125.

Could you change for me? I had a change of heart. Sorry to be a pain

WhiteFireDragon · « **Reply #77 on:** Sun, 20 January 2013, 17:07:50 »

2nd post is now updated with your orders to view. ISO plates need to ramp it up. Post in here or PM me if you need changes.

metafour · « **Reply #78 on:** Sun, 20 January 2013, 17:09:48 »

Are you still planning to offer spacebar stabilizer wires directly, both 6.25x and 7x, as well?

WhiteFireDragon · « **Reply #79 on:** Sun, 20 January 2013, 17:31:50 »

As for stabilizers, cherry plate mounted are available on mouser, part number is 0G990224. Costars are available on WASDkeyboard HERE, bottom half.

I have enough cherry stabilizers for 20 sets that can shipped with the plates. If I run out, you can get your own from the links or from Profosist. If you're getting your own, a complete TKL needs 10 stabilizers, I think shipping from mouser is $7 and WASDkeyboard is $2.50. Currently you can't buy cherry 6.25x or 7x, and 7x costar wires anywhere so I'll make these when the time comes closer.

Piehunter · « **Reply #80 on:** Sun, 20 January 2013, 20:31:12 »

ordered 1 ANS125
THanks

alaricljs · « **Reply #81 on:** Sun, 20 January 2013, 21:01:59 »

Quote from: WhiteFireDragon on Sun, 20 January 2013, 17:31:50

If you're getting your own, a complete TKL needs 10 stabilizers,

That number is only correct if you are buying from WASD. You need 5 count Cherry parts. 4 2x and 1 space bar.

I also have 25 sets in the classifieds of Cherry plate mount 6.25x space bar

jabar · « **Reply #82 on:** Sun, 20 January 2013, 21:10:45 »

placed order

mashby · « **Reply #83 on:** Sun, 20 January 2013, 22:55:57 »

Ordered.

TheProfosist · « **Reply #84 on:** Sun, 20 January 2013, 23:29:45 »

Quote from: Piehunter on Sun, 20 January 2013, 20:31:12

ordered 1 ANS125
THanks

Quote from: jabar on Sun, 20 January 2013, 21:10:45

placed order

Quote from: mashby on Sun, 20 January 2013, 22:55:57

Ordered.

All Confirmed!!!

WhiteFireDragon · « **Reply #85 on:** Sun, 20 January 2013, 23:46:58 »

Quote from: alaricljs on Sun, 20 January 2013, 21:01:59

Quote from: WhiteFireDragon on Sun, 20 January 2013, 17:31:50
If you're getting your own, a complete TKL needs 10 stabilizers,

That number is only correct if you are buying from WASD. You need 5 count Cherry parts. 4 2x and 1 space bar.

I also have 25 sets in the classifieds of Cherry plate mount 6.25x space bar

Ah yes they come in pairs, unlike costar stab parts that are all individually bought.

I just found it. lol are you interested in making all 171 wires too? Whatever you don't make, I'll end up making the rest.
http://geekhack.org/index.php?topic=39441.0

EDIT: nevermind, I just read that thread and you only had 25 and no plans for more.

TheProfosist · « **Reply #86 on:** Sun, 20 January 2013, 23:50:21 »

Quote from: WhiteFireDragon on Sun, 20 January 2013, 23:46:58

Quote from: alaricljs on Sun, 20 January 2013, 21:01:59
Quote from: WhiteFireDragon on Sun, 20 January 2013, 17:31:50
If you're getting your own, a complete TKL needs 10 stabilizers,

That number is only correct if you are buying from WASD. You need 5 count Cherry parts. 4 2x and 1 space bar.

I also have 25 sets in the classifieds of Cherry plate mount 6.25x space bar

Ah yes they come in pairs, unlike costar stab parts that are all individually bought.

I just found it. lol are you interested in making all 171 wires too? Whatever you don't make, I'll end up making the rest.
http://geekhack.org/index.php?topic=39441.0

he didnt make them, he got them from someone.

BimboBB · « **Reply #87 on:** Mon, 21 January 2013, 02:47:09 »

@Prof & WFD

can you both guys ship the parts together?

TheProfosist · « **Reply #88 on:** Mon, 21 January 2013, 03:06:12 »

Quote from: BimboBB on Mon, 21 January 2013, 02:47:09

@Prof & WFD

can you both guys ship the parts together?

The plates marked to ship to me wil ship with anything else you order from me.

esoomenona · « **Reply #89 on:** Mon, 21 January 2013, 05:02:07 »

What sort of price are you thinking for 7x Costar bars, WFD?

TheProfosist · « **Reply #90 on:** Mon, 21 January 2013, 05:16:53 »

Quote from: esoomenona on Mon, 21 January 2013, 05:02:07

What sort of price are you thinking for 7x Costar bars, WFD?

he told me a couple bucks to figure for my gb for the others.

danielucf · « **Reply #91 on:** Mon, 21 January 2013, 07:45:24 »

So if I ordered the other WFD plates from the other group buy that will work for for a 1.25 modifier layout right? I think I only need one ANS150 plate and a 7x Cherry bar from this group buy then. Got two Phantoms coming.

alaricljs · « **Reply #92 on:** Mon, 21 January 2013, 10:47:37 »

The biggest issue with stocking Cherry plate mount stabilizers is the demand level. It's zero until a project like this comes along and then you have no idea how many will go with Cherry. I'm not so keen on that level of risk, don't want a chunk of space or money missing for ages.

reality404 · « **Reply #93 on:** Mon, 21 January 2013, 15:43:49 »

Ordered. Thanks for the group buy.

TheProfosist · « **Reply #94 on:** Mon, 21 January 2013, 19:46:23 »

Quote from: danielucf on Mon, 21 January 2013, 07:45:24

So if I ordered the other WFD plates from the other group buy that will work for for a 1.25 modifier layout right? I think I only need one ANS150 plate and a 7x Cherry bar from this group buy then. Got two Phantoms coming.

All orders for plates from my GB are invalid

TheProfosist · « **Reply #95 on:** Mon, 21 January 2013, 19:46:35 »

Quote from: alaricljs on Mon, 21 January 2013, 10:47:37

The biggest issue with stocking Cherry plate mount stabilizers is the demand level. It's zero until a project like this comes along and then you have no idea how many will go with Cherry. I'm not so keen on that level of risk, don't want a chunk of space or money missing for ages.

yep i understand completely

Acanthophis · « **Reply #96 on:** Tue, 22 January 2013, 11:35:26 »

So who do I PM for an order change? WFD or Prof?

TheProfosist · « **Reply #97 on:** Tue, 22 January 2013, 11:38:56 »

Quote from: Acanthophis on Tue, 22 January 2013, 11:35:26

So who do I PM for an order change? WFD or Prof?

i can do it i believe im quoted in the OP

WhiteFireDragon · « **Reply #98 on:** Tue, 22 January 2013, 15:39:06 »

Quote from: Rendom on Tue, 22 January 2013, 15:15:36

Hi, just wonder if ANSI125 can have 84 winkeyless layout ?

Nope, only the ANS150, ISO150, HHK150, and RBD150 can support winkeyless. Basically anything with 1.5x mod size.

BimboBB · « **Reply #99 on:** Tue, 22 January 2013, 15:56:14 »

When all the "case-builders" are requiring there own plates, does it make sense than to order a plate here? Just cannot see anybody doing a case for this plate. Or do I overlook something?

News:

Author Topic: Phantom PLATES (shipping) (Read 89881 times)