Post by: Seoulcialite on Fri, 08 May 2020, 14:05:15
GB Thread is up! (https://geekhack.org/index.php?topic=116274.0)
Do you love through-hole keyboards? Wish there was a more premium option? If you’ve answered yes, I may have a keyboard for you! I present to you, Argyle.
IC Form (https://forms.gle/hdTaLvzSpWRFbHLS9)
Please take a minute to fill it out. If this goes to GB, most likely only the most popular 2 or 3 options will be offered.
Features:
- 8 degree typing angle
- Aluminum housing
- Visible through-hole components
- RGB LEDs for the side partitions
- Top mounted plate
- QMK/VIA
- USB-C
Rendered by Abec
(https://imgur.com/zNv6aDA.jpg)
(https://imgur.com/ISpSarr.jpg)
(https://imgur.com/FZWVHFR.jpg)
(https://imgur.com/5HLjxG9.jpg)
(https://imgur.com/Cc2fXmv.jpg)
(https://imgur.com/DlRZYAE.jpg)
(https://imgur.com/UVLfi36.jpg)
Additional Renders:
More
(https://imgur.com/kD7fEIv.jpg)
(https://imgur.com/zfLzNk5.jpg)
(https://imgur.com/vhQg3TX.jpg)
(https://imgur.com/6Jx46Ev.jpg)
(https://imgur.com/DrUoSOR.jpg)
(https://imgur.com/tLJvzys.jpg)
(https://imgur.com/zfLzNk5.jpg)
(https://imgur.com/vhQg3TX.jpg)
(https://imgur.com/6Jx46Ev.jpg)
(https://imgur.com/DrUoSOR.jpg)
(https://imgur.com/tLJvzys.jpg)
PCB and Silkscreen:
(https://imgur.com/CGyyCjx.jpg)
The argyle patterns of the bottom corners needs no explanation. Love it or hate it? Let me know in the IC form. As for the logo on the top-right, I have been thinking about becoming a vendor serving Asia for some time now. It is still under consideration but I have put in some legwork including a name, MechSeoul, and a logo. Even if I decide to not go the vendor route, the logo is something I decided to place on my current and any future designs. It features N-Tower, an iconic communications tower located in the center of Seoul.
Supported Layouts:
(https://imgur.com/ul9KW2a.jpg)
Vendors:
- EU: ProtoTypist
- Others: to be determined
Pricing and MOQ:
To be determined
Colors and Options:
- Housing Colors: black, white (other options to be determined)
- PCB Colors: to be determined
- Tops: standard (possibly WKL and HHKB)
- Plates: aluminum (other options to be determined)
- Window: acrylic
or glass
I love the through-hole keyboards out there but I wanted one with a metal housing. So, I employed the wonderful team at ProtoTypist (Jae: logistics and fulfillment, James: housing design, Yiancar: PCB design) to make my idea into a reality. To give it’s own flavor and to give a better view of the components, the components were split to the sides of the keyboard. The relatively high typing angle was also chosen to increase the visibility of the components. Even though 65% is my favorite layout by far, I couldn’t pass up the opportunity to match the symmetry of the housing with the symmetry of the 60% layout. Because the focus of the keyboard is the side partitions, the rest of the design was kept relatively simple.
To-do:
Get prototype PCBs(Built and tested)Get prototype housing(Currently with Jae for fitment testing)- Finalize vendors
- Finalize details (MOQ, colors, options, pricing)
- Sound: The hollow space in the side partitions may negatively affect the sound (but can probably be easily remedied with foam if that's the case)
- Illumination: The LEDs may not illuminate the entirety of the partition in a satisfactory way.
FAQ:
Q: How are the see-through panels held in place?
A: There are grooves for rubber/foam which will hold up the panels. The grooves can be seen in some of the renders if you look closely.
Q: How are the side partitions illuminated?
A: The image of the PCB shows the location of 10 RGB LEDs. These LEDs will shoot light up into a diffuser which will direct light off to the sides. One side of the diffuser is blocked off to prevent light bleed through the switch plate. A simple render of the implementation can be seen here:
More
(https://imgur.com/xOzeGFr.jpg)
Q: Could you add an bluetooth, OLED, rotary encoder, T-bar fader, fingerprint reader, and/or flux capacitor?
A: If the response of the IC/GB is positive, the GB runs smoothly, and the desire for a R2 is high, ideally I would add more features in future rounds. The design team and I already had to put our minds together to tackle a few obstacles such as elegant way to hold the panels in place and to light up the interior of the side partitions. More features means a higher chance something will fail or not be adequate. So, I'm starting simple now but I'm open to add more features in any future rounds.
Banner:
Show your support by adding the following to your signature:
Code: [Select]
[url=https://geekhack.org/index.php?topic=106255.0][img width=480 height=120]https://imgur.com/gOc9crW.png[/img][/url]
Post by: Seoulcialite on Fri, 08 May 2020, 14:05:47
Post by: ab042896 on Fri, 08 May 2020, 14:15:11
Post by: fropsie on Fri, 08 May 2020, 14:16:56
Post by: singabore on Fri, 08 May 2020, 14:18:48
Post by: PvtSkittles on Fri, 08 May 2020, 14:21:10
Post by: donut_sauce on Fri, 08 May 2020, 14:23:24
Post by: Fredington on Fri, 08 May 2020, 14:30:24
Post by: naked_and_jameson on Fri, 08 May 2020, 14:33:59
Post by: ttom on Fri, 08 May 2020, 14:43:37
Post by: huey on Fri, 08 May 2020, 14:58:05
Some form of PCB mount would make this board for me.
The renders do make it look silver to me though, I know it should be white but eh.
Also, how are the "glass" panels going to be mounted? It seems like the most fragile part of the design, while easy to replace, it's durability concerns me.
Post by: badboy731 on Fri, 08 May 2020, 15:16:10
Post by: Seoulcialite on Fri, 08 May 2020, 15:21:25
Nice. Thank you for adding ISO support, the bottom engraving is fantastic, the silk-screen is classy and well done, and the overall minimal design is lovely.
Some form of PCB mount would make this board for me.
The renders do make it look silver to me though, I know it should be white but eh.
Also, how are the "glass" panels going to be mounted? It seems like the most fragile part of the design, while easy to replace, it's durability concerns me.
First keyboard IC so I thought I'd keep it simple with top-mount. GMK Shoko has been rendered with silver housing.
There will be grooves to hold foam that will in turn hold up the panels. So, the panels are kind of gasket mounted? haha. Thought about putting gasket mount in the title but thought that would be too bait and switch. lol.
Post by: neon_tom on Fri, 08 May 2020, 16:49:53
Post by: Magnificent Bureaucrat on Fri, 08 May 2020, 18:07:57
I live in hope of a cheap version of this premium version of the cheap through-holes :)
Post by: phat schlong on Fri, 08 May 2020, 18:36:39
Post by: worldspawn on Fri, 08 May 2020, 18:37:09
(https://cdn.discordapp.com/attachments/517841096798109696/708461825704067143/unknown.png)
Post by: hottrout on Fri, 08 May 2020, 18:42:32
Post by: Zeelobby on Fri, 08 May 2020, 19:09:12
Post by: FRANCO on Fri, 08 May 2020, 19:18:52
Post by: abstractkb on Fri, 08 May 2020, 19:55:50
Post by: GarrettSucks on Fri, 08 May 2020, 20:18:14
Post by: DuellM on Fri, 08 May 2020, 20:45:42
Post by: i luv chuletas on Sat, 09 May 2020, 00:37:35
Post by: Seoulcialite on Sat, 09 May 2020, 02:07:54
This idea is really cool. But I don’t think you should have argyle on the PCB. It really forces a distinct design style to the board that will clash with tons of keyset styles.
That's a good point. I will add a question to the IC form to see how others feel about it.
Quirky but quite cool. Could make a great gaming board. Will there be any lighting on the sides?
Yes. This has been mentioned in the original post. In the PCB image I have posted, you can see 4 LEDs per side. These LEDs will be shooting up into a diffuser. The diffusers will be blocked on one side to prevent light bleed through the switch plate.
What's the intent with the I2C header? If you rearranged the pins so it is GND 5v SCK SDA, one could install an OLED in that location as well.Show Image(https://cdn.discordapp.com/attachments/517841096798109696/708461825704067143/unknown.png)
As I only commissioned the design, I do not know the intent of the I2C header.
An OLED would be a great idea. However, I'm afraid I would not want to add it currently. If there is a 2nd round, it would definitely be considered.
Would there be space to install a rotary encoder?
Rotary encoder will not be considered at this time and round.
Post by: Seoulcialite on Sat, 09 May 2020, 02:15:57
Wow, this is such an interesting design. Do you have an idea of how the clear windows would mount inside the case?
This has been answered in a previous post:
There will be grooves to hold foam that will in turn hold up the panels. So, the panels are kind of gasket mounted? haha. Thought about putting gasket mount in the title but thought that would be too bait and switch. lol.
Odds on this is going to be out of the question for me finance wise, but this looks so freakin' good.
I live in hope of a cheap version of this premium version of the cheap through-holes :)
If you look closely at the PCB picture, there are 6 holes that can be used to screw into a back plate. So, it's a possibility it may be offered as a kit at a much later date.
Post by: Kalibrrr on Sat, 09 May 2020, 02:41:11
Post by: beekey on Sat, 09 May 2020, 03:52:28
Are there other "good looking" electronic parts which could be added to the bottom corners, replacing the pattern? Copper coils (https://www.alibaba.com/product-detail/Copper-wire-wound-coil-for-PCB_904687178.html (https://www.alibaba.com/product-detail/Copper-wire-wound-coil-for-PCB_904687178.html), no function, just for the looks?
Post by: L-Ron on Sat, 09 May 2020, 04:08:27
Post by: equalunique on Sat, 09 May 2020, 14:38:38
I try to stay away from 60% unless there is a 1x5 macro column to the left, or a 2x5 macro column in the case of 65%. Something about not having G & H in the center bothers me.
Post by: worldspawn on Sat, 09 May 2020, 19:45:30
What's the intent with the I2C header? If you rearranged the pins so it is GND 5v SCK SDA, one could install an OLED in that location as well.Show Image(https://cdn.discordapp.com/attachments/517841096798109696/708461825704067143/unknown.png)
As I only commissioned the design, I do not know the intent of the I2C header.
An OLED would be a great idea. However, I'm afraid I would not want to add it currently. If there is a 2nd round, it would definitely be considered.
I'm not suggesting you add the OLED, I'm suggesting you slightly change the pin arrangement so others can.
Post by: Shutter_Shock on Sat, 09 May 2020, 20:46:54
This idea is really cool. But I don’t think you should have argyle on the PCB. It really forces a distinct design style to the board that will clash with tons of keyset styles.
+1.
Honestly, I end up never using 60%'s because I miss the arrow keys too much. If I have the cash to burn when the GB goes live, I'll definitely consider it. Or if there is a 65% version in the future, I'm in. Best of luck!!
Post by: blizzara01 on Sat, 09 May 2020, 21:08:07
Post by: Visionaire on Sun, 10 May 2020, 15:49:50
Post by: oldcat on Sun, 10 May 2020, 15:51:36
Post by: mongoose27 on Sun, 10 May 2020, 15:54:23
Post by: vewy_nice on Sun, 10 May 2020, 16:33:48
Also would look good with some "useless" components in there. Like a few electrolytic capacitors or something... You know just cuz.
Post by: switchnollie on Sun, 10 May 2020, 16:50:00
Post by: hownowbrowncow on Mon, 11 May 2020, 01:31:48
Post by: pixelpusher on Mon, 11 May 2020, 01:59:24
Post by: Seoulcialite on Mon, 11 May 2020, 03:14:51
Isn't acrylic is easily to scratch? Glass would be better I think.
To be determined. In any event, dimensions of the panels would be shared at a later date so that people may get acrylic or glass panels in different tint/color cut locally/online.
It looks cool, but what the heck are those chips on the left and the right? I've never seen anything in a package like that on a modern keyboard. Are they just for looks or are those actual processors?
This is a different take on the through-hole keyboards kits out there like the gingham, plaid, discipline, etc. All the components you see are functional. To my knowledge, the left chip handles the matrix and the right handles the LED lighting.
This is so nice. I love the look of nice electronic designs. I hope I can get one.
Are there other "good looking" electronic parts which could be added to the bottom corners, replacing the pattern? Copper coils (https://www.alibaba.com/product-detail/Copper-wire-wound-coil-for-PCB_904687178.html (https://www.alibaba.com/product-detail/Copper-wire-wound-coil-for-PCB_904687178.html), no function, just for the looks?
I will not be adding anything that doesn't have a function to the board.
Post by: paulgali on Mon, 11 May 2020, 03:43:52
Post by: konstantin on Mon, 11 May 2020, 06:11:30
It looks cool, but what the heck are those chips on the left and the right? I've never seen anything in a package like that on a modern keyboard. Are they just for looks or are those actual processors?
This is a different take on the through-hole keyboards kits out there like the gingham, plaid, discipline, etc. All the components you see are functional. To my knowledge, the left chip handles the matrix and the right handles the LED lighting.
You are correct. Going off of Yiancar's previous designs, the left chip is an ATmega328 microcontroller (MCU), which does all of the keyboard work like matrix scanning, interpreting keycodes, communicating with the host, sending scancodes via USB etc. The right chip is an I/O port expander, which is used to allow the MCU to control the LED lighting since the MCU itself doesn't have enough GPIO pins (it has barely just enough for the key matrix).
Post by: ephemeral25 on Mon, 11 May 2020, 08:38:01
Big fan of displaying smd components.
Post by: hkiri on Mon, 11 May 2020, 08:46:37
This is definitely a must buy for me!
Post by: Seoulcialite on Mon, 11 May 2020, 09:59:27
Prototype PCBs are in. But I'm still waiting for the components to arrive.
Post by: kedayap on Mon, 11 May 2020, 10:59:14
Post by: TEL_Venom on Mon, 11 May 2020, 11:13:39
Post by: valkyr1e on Mon, 11 May 2020, 11:20:02
Just take my money already.
This.
Post by: Rob27shred on Mon, 11 May 2020, 11:35:52
Post by: Lazy_Borzoi on Mon, 11 May 2020, 11:41:54
Can you tell us if it's going to be an limited or unlimited GB?
Post by: nathanchere on Mon, 11 May 2020, 16:27:53
Post by: saqneo on Mon, 11 May 2020, 16:42:12
Post by: pixelpusher on Mon, 11 May 2020, 16:43:50
Show Image(https://imgur.com/Sb2zUJ0.jpg)
Prototype PCBs are in. But I'm still waiting for the components to arrive. Pending no issues with the PCB, after I build one, I'll most hold a raffle for 3 of them for free (not including shipping) with a backplate, components, and spacers through an event (most likely Instagram like & tag).
awe snap, I didn't see that it was Alps compatible. Okay. I'm in.
Post by: PvtSkittles on Mon, 11 May 2020, 17:04:06
Post by: pixelpusher on Mon, 11 May 2020, 17:10:19
I would also prefer not having the argyle pattern printed on the PCB.
Make sure you fill out the IC form in the Original post. There is a section where you can tell him that.
Post by: octix on Mon, 11 May 2020, 19:00:40
Post by: Eviscerae on Tue, 12 May 2020, 09:30:51
Post by: onmybikedrunk on Tue, 12 May 2020, 11:27:51
Post by: HannibalChew on Tue, 12 May 2020, 15:49:31
Post by: CrlaoSvloadr on Tue, 12 May 2020, 21:56:50
Post by: sugar.tea.milk on Tue, 12 May 2020, 23:57:05
Both options look so nice, it's quite hard to choose between the two. :thumb:
Post by: vaf1en on Wed, 13 May 2020, 13:50:51
Post by: lys.nordique on Wed, 13 May 2020, 14:55:09
Post by: Seoulcialite on Wed, 13 May 2020, 15:31:20
Definitely interested.
Can you tell us if it's going to be an limited or unlimited GB?
It will be limited. The details and options are still being hashed out but you can probably expect 100 to 200 units. Most likely right in the middle at around 150.
Does the case have a seam? The renders don't show it but the bottom makes me think it has one. I like the design but I don't buy keyboards with seams because I don't like it.
Yes, it has a seam.
What's the intent with the I2C header? If you rearranged the pins so it is GND 5v SCK SDA, one could install an OLED in that location as well.Show Image(https://cdn.discordapp.com/attachments/517841096798109696/708461825704067143/unknown.png)
As I only commissioned the design, I do not know the intent of the I2C header.
An OLED would be a great idea. However, I'm afraid I would not want to add it currently. If there is a 2nd round, it would definitely be considered.
I'm not suggesting you add the OLED, I'm suggesting you slightly change the pin arrangement so others can.
The pin arrangement has been changed. But since it was not in the scope of the commission, OLED functionality will not be provided by us. Hopefully someone in the community can.
Post by: Lazy_Borzoi on Wed, 13 May 2020, 18:08:58
Definitely interested.
Can you tell us if it's going to be an limited or unlimited GB?
It will be limited. The details and options are still being hashed out but you can probably expect 100 to 200 units. Most likely right in the middle at around 150.
Thank you for your answer. I hope you will consider to raffle the GB spots and not FCFS. I feel like at least with the raffle, everyone has got the same chance. I can't compete with bots in the FCFS format. I tried joining many GBs that were limited and never got in. Not once.
Post by: fluxlab on Thu, 14 May 2020, 01:21:38
Sent from my ONEPLUS A5010 using Tapatalk
Post by: markclemmons on Tue, 19 May 2020, 02:58:26
Sent from my Pixel 4 XL using Tapatalk
Post by: Dyto69 on Tue, 19 May 2020, 03:33:46
Post by: timbuktew on Wed, 20 May 2020, 15:04:53
Post by: izroll on Wed, 20 May 2020, 17:26:05
Post by: mongoose27 on Wed, 20 May 2020, 17:39:10
Post by: ackzot on Wed, 20 May 2020, 18:02:09
still debating as it feels more like show piece than a daily driver, but at least it presents a 60 keyboard that is visually striking compared to others.
Post by: diddykang on Wed, 20 May 2020, 21:10:51
Post by: ilikerustoo on Thu, 21 May 2020, 01:21:15
Post by: Seoulcialite on Thu, 21 May 2020, 06:09:14
love the design aesthetic, especially the black. it's longer lengthwise than most 60s, so feels a little counter intuitive in terms of working against one of the benefits of a 60 keyboard.
still debating as it feels more like show piece than a daily driver, but at least it presents a 60 keyboard that is visually striking compared to others.
No denying that the main focus of this keyboard is the through-hole aesthetics. The other through-hole kits like the plaid, discipline, and gingham are the same. There's no real reason for the components to be in a separate area unless it is to give some visual impact. The Argyle is just taking that a step further. So, yes, the design is not functional, but I hope to deliver a more premium feel than simple sandwich mount PCB kits while keeping the aesthetics.
Thank you for your answer. I hope you will consider to raffle the GB spots and not FCFS. I feel like at least with the raffle, everyone has got the same chance. I can't compete with bots in the FCFS format. I tried joining many GBs that were limited and never got in. Not once.
The plan is to have multiple vendors. And it is easiest for them to simply do a FCFS format GB. If the first GB is successful, I would be love to have additional rounds.
Post by: rmw2013 on Thu, 21 May 2020, 16:55:10
Sent from my ONEPLUS A3000 using Tapatalk
Post by: d00deitsnik on Fri, 22 May 2020, 04:00:34
Post by: IvernTheTree on Sun, 24 May 2020, 02:51:19
Post by: BaltO on Mon, 25 May 2020, 01:31:03
Post by: roguesystem087 on Mon, 25 May 2020, 06:57:41
Post by: amperrsand on Tue, 26 May 2020, 17:17:52
Post by: Rök on Wed, 27 May 2020, 17:07:16
Post by: GaNeBaL on Fri, 29 May 2020, 11:49:26
Post by: DALExSNAIL on Fri, 29 May 2020, 11:55:58
So I am in.
Post by: maximize on Fri, 29 May 2020, 18:45:14
Post by: chickenballs on Sun, 31 May 2020, 10:09:43
Sent from my Pixel 3 using Tapatalk
Post by: Rob27shred on Sun, 31 May 2020, 10:50:33
Show Image(https://imgur.com/Sb2zUJ0.jpg)
Prototype PCBs are in. But I'm still waiting for the components to arrive. Pending no issues with the PCB, after I build one, I'll most hold a raffle for 3 of them for free (not including shipping) with a backplate, components, and spacers through an event (most likely Instagram like & tag).
awe snap, I didn't see that it was Alps compatible. Okay. I'm in.
Wait wut, ALPS..... yeah I'm in for sure now too!
Post by: Seoulcialite on Sun, 31 May 2020, 11:59:41
I think you said you might do a 65 and 75% after the 60%, I'm sure it's very hard to estimate times but can you guestimate when would they be available ? If I have to wait like 1-2years to get the other version then I might just jump on the 60 lol
Sent from my Pixel 3 using Tapatalk
I'm sorry. I really can't say. It depends on many different factors.
A shortened but not so short version: The design for the 65% isn't going to start until the 60% GB is over. First, a prototype for the 60% needs to be approved by Jae (of Prototypist) and I. Also, we'd need to find a date range that all the vendors can agree on to run the GB. After the 60% GB ends, then would come the design phase of the 65%. I haven't given too much thought on what changes I'd make if any for the 65% version other than the layout. After the design is completed and approved, we'd go to prototype phase. Again, a proto would need to be approved before GB for the 65%.
Any time estimate I give now would just really be a random guess. This would be my first keyboard GB and it really has given me a lot of insight in how complicated the process is.
Post by: wolfez4444 on Tue, 02 June 2020, 07:30:02
Post by: scie on Tue, 02 June 2020, 08:35:59
Post by: Beef Supreme on Thu, 04 June 2020, 10:41:09
Post by: Laur on Thu, 04 June 2020, 12:00:09
Post by: MShaw09 on Fri, 05 June 2020, 15:07:22
Are there any ways other than GH to stay updated with the progress, like a discord server? Definitely don't want to miss this one!
Post by: Cold Hands on Mon, 08 June 2020, 01:21:34
Post by: x86ect on Mon, 08 June 2020, 09:08:05
Edit: Hmmm... perhaps it would make the sides too wide.
Post by: TheHMan on Mon, 08 June 2020, 19:40:09
Post by: Zoba on Mon, 08 June 2020, 22:22:57
Post by: Seoulcialite on Tue, 09 June 2020, 01:07:06
Hey Seoulcialite, not sure if it's too late for this but, would it be possible to put an LED beside each one of the diodes and have the LED light up when electricity flowed through it?
Edit: Hmmm... perhaps it would make the sides too wide.
Yeaaaaa.... more than a couple of problems with that. That would require drastic changes to the PCB and housing. Design for the PCB already been completed and I already have the prototype PCBs with me. Prototype housing has been made and is now in the hands of Jae (of ProtoTypist) for fitment testing. I think it would definitely tip the balance aesthetic and functionality in a negative way.
Is there a discord for updates?
Not at the moment. I will post discord info once the prototype is approved and we get a better estimate on when the GB will run.
Post by: Bachoo on Tue, 09 June 2020, 11:07:53
Post by: Kreath on Fri, 12 June 2020, 22:38:00
Post by: Seoulcialite on Sun, 14 June 2020, 12:59:37
Decided to post a little tease. Prototype is currently in Jae's possession. He will be doing fitment testing for the plate, pcb, and see-through panels before sending it to me for final approval.
Post by: lys.nordique on Sun, 14 June 2020, 13:09:36
Post by: stein3 on Sun, 14 June 2020, 13:24:43
Post by: hottrout on Tue, 16 June 2020, 12:02:29
Post by: ♾Ḋḯṩⱥṩẗḝṟ on Wed, 17 June 2020, 05:36:15
Show Image(https://imgur.com/G1LccUy.jpg)
Decided to post a little tease. Prototype is currently in Jae's possession. He will be doing fitment testing for the plate, pcb, and see-through panels before sending it to me for final approval.
Chamfered edges are looking real clean, can't wait to see more. Please keep the teasers/updates coming ;)
Post by: nathanchere on Wed, 17 June 2020, 06:00:10
Quote
Tops: standard (possibly WKL and HHKB)
How likely is a HHKB top looking at this point?
Post by: grundlemere on Wed, 17 June 2020, 08:19:03
Post by: pixelpusher on Wed, 17 June 2020, 23:20:49
This is super extra. Love the Radio Shack vibes. I can't wait to see it lit up!
er... i don't think it lights up
Post by: IvernTheTree on Thu, 18 June 2020, 01:48:09
Wait didn't the one who made it said that there will be led on the side to light the sides up?This is super extra. Love the Radio Shack vibes. I can't wait to see it lit up!
er... i don't think it lights up
Post by: konstantin on Thu, 18 June 2020, 04:56:33
Wait didn't the one who made it said that there will be led on the side to light the sides up?This is super extra. Love the Radio Shack vibes. I can't wait to see it lit up!
er... i don't think it lights up
Features:[/list]
- ...
- RGB LEDs for the side partitions
Post by: bow3i on Fri, 19 June 2020, 03:28:19
Post by: pixelpusher on Fri, 19 June 2020, 10:05:04
Post by: Llamakob on Sun, 21 June 2020, 05:36:07
Post by: wolfez4444 on Wed, 22 July 2020, 14:27:49
Post by: beekey on Wed, 22 July 2020, 14:43:26
Would also like to get a HHKB top.QuoteTops: standard (possibly WKL and HHKB)
How likely is a HHKB top looking at this point?
Post by: pixelpusher on Tue, 04 August 2020, 12:49:11
Updoots?
Post by: Seoulcialite on Tue, 04 August 2020, 14:53:13
My DCS red alert shipped and I saw the render that reminded me of this IC :p
Updoots?
It seems like glass will not be viable. It's difficult to find a glazier that can cut to the specifications that we need, the tolerances would not be close enough, and also it'd be too costly. Jae has ordered acrylic panels which should arrive this week. So, we're hoping to finish fitment testing of all the parts soon.
Post by: pixelpusher on Tue, 04 August 2020, 15:35:44
My DCS red alert shipped and I saw the render that reminded me of this IC :p
Updoots?
It seems like glass will not be viable. It's difficult to find a glazier that can cut to the specifications that we need, the tolerances would not be close enough, and also it'd be too costly. Jae has ordered acrylic panels which should arrive this week. So, we're hoping to finish fitment testing of all the parts soon.
That all makes sense. Thanks for the update. Such a lovely project.
What about offering an add on for an additional set of windows. Could keep them stored away for down the road if you get a bad scratch.
Post by: Rob27shred on Tue, 04 August 2020, 16:53:00
My DCS red alert shipped and I saw the render that reminded me of this IC :p
Updoots?
It seems like glass will not be viable. It's difficult to find a glazier that can cut to the specifications that we need, the tolerances would not be close enough, and also it'd be too costly. Jae has ordered acrylic panels which should arrive this week. So, we're hoping to finish fitment testing of all the parts soon.
That all makes sense. Thanks for the update. Such a lovely project.
What about offering an add on for an additional set of windows. Could keep them stored away for down the road if you get a bad scratch.
I second Pixel's ideal, scratching is the only real issue with using acrylic. If you offer extras nobody can complain down the road if theirs get scratched & they didn't buy an extra set, LOL!
Post by: pixelpusher on Tue, 04 August 2020, 17:55:54
Post by: Owl- on Tue, 04 August 2020, 19:53:54
Post by: macomac on Wed, 05 August 2020, 14:07:23
Post by: Dubsadan on Wed, 05 August 2020, 16:26:52
My DCS red alert shipped and I saw the render that reminded me of this IC :p
Updoots?
It seems like glass will not be viable. It's difficult to find a glazier that can cut to the specifications that we need, the tolerances would not be close enough, and also it'd be too costly. Jae has ordered acrylic panels which should arrive this week. So, we're hoping to finish fitment testing of all the parts soon.
Appreciate the update. Glass is nice but not worth any significant cost increase.
Post by: lys.nordique on Wed, 05 August 2020, 16:34:02
Post by: Seoulcialite on Thu, 06 August 2020, 01:41:38
The shape of the acrylic seams rectangular so glass planels are easily doable on your side if you really want to have glass.
Glass panels were something we really wanted. It's not like we contacted one shop, was declined, and gave up on the idea. Jae has contacted a handful of glazier shop but the radius of the corners is too small. Also we would need 2mm thickness whereas most shops only do 4mm minimum. Finally, as I stated before, the tolerances would not be tight enough for the mounting system that we are using. No question that we could probably get something in that shape with glass but the chances that it wouldn't fit or would not be snug with the rubber mounting seams would be too high. However, we will be releasing the files for the panels after the group buy for anyone that wants to try to get them made themselves.
Post by: lys.nordique on Thu, 06 August 2020, 10:54:44
Post by: Jae-3soteric on Thu, 06 August 2020, 11:35:13
I was talking from your perspective. I meant that the customer can easily make the panels on their side. It wasn’t clear, my bad.
The shape of the acrylic seams rectangular so glass planels are easily doable on your side if you really want to have glass.
Glass panels were something we really wanted. It's not like we contacted one shop, was declined, and gave up on the idea. Jae has contacted a handful of glazier shop but the radius of the corners is too small. Also we would need 2mm thickness whereas most shops only do 4mm minimum. Finally, as I stated before, the tolerances would not be tight enough for the mounting system that we are using. No question that we could probably get something in that shape with glass but the chances that it wouldn't fit or would not be snug with the rubber mounting seams would be too high. However, we will be releasing the files for the panels after the group buy for anyone that wants to try to get them made themselves.
Yeah, its a difficult one. We can physically get glass cut to size, but its not cheap, and its not toughened as we need it in 2mm thickness. From a safety perspective I wouldn't be comfortable with 2mm thick glass in there after some conversations with Glaziers - plus there would be some re-design of the board needed as we would need to change the internals and thicken up the height to accommodate thicker glass and still have room for components. Given the cost associated to achieve that, plus the cost variance in glass and acrylic vs having a great material available in perspex off the shelf it def makes sense to go with that for now.
That being said we can always open up the files for people to get some additional materials made up for the window areas.
Post by: paperassgasket on Thu, 06 August 2020, 15:52:36
Good luck with this one. :thumb:
Post by: nathanchere on Fri, 07 August 2020, 06:06:32
QuoteTops: standard (possibly WKL and HHKB)
How likely is a HHKB top looking at this point?
Just in case this was accidentally missed... *bump*
Post by: zekth on Fri, 07 August 2020, 17:01:16
Post by: NoxNoxNox on Fri, 07 August 2020, 20:48:47
Looking forward to this one big time.
Post by: jagger27 on Sat, 08 August 2020, 20:35:12
Post by: darthcapn on Sat, 08 August 2020, 20:43:11
Post by: EMC Labs on Sat, 08 August 2020, 21:27:26
Post by: Seoulcialite on Mon, 10 August 2020, 01:51:33
How likely will the HHKB and WKL tops be included?
Expected timelframe for gb?
I hope to have more details soon. Testing the prototype is almost complete.
Post by: keebpleeb on Mon, 10 August 2020, 09:26:45
Post by: Zenith10010 on Tue, 18 August 2020, 20:13:13
Hopefully this comes to Deskhero.ca
Post by: dirtegg on Sat, 22 August 2020, 16:06:08
Post by: Mtvan87 on Thu, 03 September 2020, 21:01:27
Post by: jimboytacos on Fri, 04 September 2020, 15:18:57
If I were to reverse engineer a pcb to fit this case, would the spacing, which houses the dual-side clear panels, fit 1.5U keycaps properly? Say, keycaps from an ergo kit....
Do you have a render of what it might look like? Just cuz I'm being extremely adventurous.
Post by: atlanticise on Tue, 15 September 2020, 08:45:23
Post by: archerypro459 on Tue, 15 September 2020, 10:21:50
Post by: EXOgreen on Wed, 16 September 2020, 13:11:22
Post by: alspdx on Wed, 16 September 2020, 23:09:26
Post by: jagger27 on Fri, 16 October 2020, 01:01:56
Post by: Ulei on Tue, 20 October 2020, 01:43:05
Post by: Seoulcialite on Mon, 26 October 2020, 14:22:28
Post by: SnowShy on Mon, 26 October 2020, 16:57:26
Post by: nathanchere on Mon, 26 October 2020, 18:23:54
The implementation of window mount and the diffuser was not exactly satisfactory. We will be making some minor changes and ordering another prototype. We are aiming to have the GB in Q1 of next year. Also, it is quite likely that we will be able to offer more units than the previously mentioned estimate of around 200. I will provide more updates as I get them.
Did the prototype give any answers re: likelihood of running this with HHKB blocker option?
Post by: Ashen_21 on Wed, 04 November 2020, 17:38:30
Post by: Seoulcialite on Fri, 13 November 2020, 14:46:51
Post by: davisthegreat on Fri, 13 November 2020, 15:54:28
Post by: kwerty on Fri, 13 November 2020, 15:56:49
Post by: hkhawk on Fri, 13 November 2020, 16:13:52
Post by: TheHMan on Fri, 13 November 2020, 21:31:57
Post by: hottrout on Mon, 16 November 2020, 04:29:23
Post by: Darthbaggins on Wed, 18 November 2020, 13:18:44
Post by: Dadrophenia on Thu, 19 November 2020, 12:56:23
Post by: Lil Pai on Sat, 21 November 2020, 08:24:33
Post by: Jaxxstatic on Sat, 21 November 2020, 18:43:13
Post by: Digmo on Sun, 22 November 2020, 15:19:43
Post by: stormer_kbds on Sat, 28 November 2020, 12:34:26
Post by: Milky_Mooncake on Tue, 01 December 2020, 03:05:10
i'm in!
Post by: guy0naBuffal0 on Sun, 06 December 2020, 09:15:46
Post by: Afresh on Mon, 14 December 2020, 08:44:34
Post by: PHYLO on Wed, 16 December 2020, 10:04:25
Post by: nick779 on Wed, 16 December 2020, 11:33:24
Post by: Jaxxstatic on Wed, 16 December 2020, 20:37:38
Maybe I missed it, but was (plate) mounting type listed anywhere?
I don't see it anywhere either,
but there are no mounting tabs on the PCB, so not PCB mount;
no holes in the PCB for plate mount; and
no foam under the PCB that can be seen in renders, so I'm assuming either gasket/sandwich or topmount.
This board is all about looks for me though. No matter what kind of mounting, or even if it sounds horrific, I'll figure out a way to make it sound and feel good.
Post by: pandaman97 on Wed, 16 December 2020, 22:10:27
Features:Renders:
- 8 degree typing angle
- Aluminum housing
- Visible through-hole components
- RGB LEDs for the side partitions
- Top mounted plate
- QMK/VIA
- USB-C
Maybe I missed it, but was (plate) mounting type listed anywhere?
I don't see it anywhere either,
but there are no mounting tabs on the PCB, so not PCB mount;
no holes in the PCB for plate mount; and
no foam under the PCB that can be seen in renders, so I'm assuming either gasket/sandwich or topmount.
This board is all about looks for me though. No matter what kind of mounting, or even if it sounds horrific, I'll figure out a way to make it sound and feel good.
Here it is, guys ;)
Post by: bvckcompton on Thu, 17 December 2020, 15:19:25
Post by: hwood34 on Thu, 17 December 2020, 15:23:33
Post by: Jaxxstatic on Thu, 17 December 2020, 17:18:52
Post by: beekey on Fri, 18 December 2020, 00:58:42
Post by: yoniwolf1202 on Fri, 18 December 2020, 08:50:19
Post by: Agent Ice on Fri, 18 December 2020, 22:10:42
Post by: Darthbaggins on Wed, 30 December 2020, 14:09:34
I really can't wait for this to go up for GB.
Post by: Seoulcialite on Fri, 08 January 2021, 08:51:23
Post by: Visionaire on Fri, 08 January 2021, 09:04:43
Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!
Very nice!
Post by: Seoulcialite on Fri, 08 January 2021, 09:16:03
Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!
Very nice!
(https://imgur.com/BQOaXUQ.jpg)
Post by: pixelpusher on Fri, 08 January 2021, 10:51:56
Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!
Do you expect to start the group buy some time soon after the stream? :)
Post by: dibstern on Sat, 09 January 2021, 15:25:53
Post by: nathanchere on Sun, 10 January 2021, 08:11:53
How likely will the HHKB and WKL tops be included?Expected timelframe for gb?
I hope to have more details soon. Testing the prototype is almost complete.
?
Post by: nathanchere on Sun, 10 January 2021, 08:12:04
The implementation of window mount and the diffuser was not exactly satisfactory. We will be making some minor changes and ordering another prototype. We are aiming to have the GB in Q1 of next year. Also, it is quite likely that we will be able to offer more units than the previously mentioned estimate of around 200. I will provide more updates as I get them.
Did the prototype give any answers re: likelihood of running this with HHKB blocker option?
?
Post by: nathanchere on Sun, 10 January 2021, 08:13:44
Plenty of other keebs in the sea.
Post by: Seoulcialite on Sun, 10 January 2021, 08:46:45
Suffice to say with the utterly garbage communication on basic points here, I won't be risking any money on a group buy with them.
Plenty of other keebs in the sea.
Sorry you feel that way. I didn't want to give an empty update but I'll try to keep in mind some people like have an update even if it's just to say "no progress." I hope you find a keeb that you like!
Will logoless version be possible like renders showed?
I will be keeping in the silkscreen at this point in time.
Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!
Do you expect to start the group buy some time soon after the stream? :)
New estimate for the GB will be Q1 of this year.
Any news if a HHKB top will be available?
We have still not finalized options yet. I plan to have a talk with Jae shortly after the build stream to hammer out some details.
Post by: Seoulcialite on Sun, 10 January 2021, 08:54:06
We are aiming to run the GB in Q1 but I don't want to make any promises. I'm just going to take Blizzard's stance on development and say, "It's done when it's done."
Post by: paperassgasket on Sun, 10 January 2021, 13:26:49
I want to apologize for the lack of updates but that's partly because there wasn't much news. The testing of the prototype has taken longer than expected. The PCB and plate fits fine. But we are still tweaking the implementation of the windows and the diffuser. Also, there is some light bleed from the component side which we wish to address. Finally, Jae has been quite busy on the vendor side due to Brexit woes.
We are aiming to run the GB in Q1 but I don't want to make any promises. I'm just going to take Blizzard's stance on development and say, "It's done when it's done."
I was just wondering how things were going, so thanks for the update.
Personally, I would much prefer that you lean towards the side of taking your time and making this board just right than rushing to get it out. Plus Q1 is already STACKED with a lot of other things so there's going to be quite a bit of competition for my wallet.
Post by: Afresh on Sun, 10 January 2021, 16:03:31
We are aiming to run the GB in Q1 but I don't want to make any promises. I'm just going to take Blizzard's stance on development and say, "It's done when it's done."
Oh.. The old Blizzard
Post by: koolaidpapa on Sun, 10 January 2021, 20:20:56
Post by: hiddensong on Thu, 14 January 2021, 05:08:40
Post by: SpenceFence on Fri, 22 January 2021, 00:35:33
Post by: dirtegg on Sat, 23 January 2021, 10:24:02
I never really liked the look of thru-hole keebs. Until the Argyle. I don't know what it is as this looks extremely similar to every other thru-hole. It just hits me right in my "open wallet" button.
I think for me, it's so special because the "exhibition of components" aspect of through-hole boards is truly emphasized here. It's taken to another artistic level for me, in the sense that it feels like you're not just happening to see the components, but they are designed to be displayed front and center (or rather, left and right!).
Post by: herfalerf on Sat, 23 January 2021, 11:58:34
Post by: NoteMakoti on Sat, 23 January 2021, 12:01:07
Post by: Ranger_Trivette on Mon, 25 January 2021, 07:25:08
i'm definitely interested!
Post by: Full on Mon, 25 January 2021, 08:11:21
Post by: Agent Ice on Sun, 31 January 2021, 21:42:39
Also, when the GB goes live, will we be able to mix and match the colors of cases with PCBs, or will they be sold as kitted units?
Post by: SpenceFence on Mon, 01 February 2021, 02:49:02
Also, when the GB goes live, will we be able to mix and match the colors of cases with PCBs, or will they be sold as kitted units?
Seconded, this is going to help me determine which keycap set Im going to put on these boards
Post by: Seoulcialite on Tue, 02 February 2021, 22:07:53
I'm very excited for this keeb! Jae on the stream said the GB might be shooting for late February. Is this accurate-ish? I might've just been hallucinating since I was very tired.
Also, when the GB goes live, will we be able to mix and match the colors of cases with PCBs, or will they be sold as kitted units?
March would probably be a better estimate. Tweaks to the case has been made and a prototype will be made after CNY.
As for kitting, most likely a universal plate will be kitted as part of the base purchase and PCB colors will be able to be chosen.
Post by: Agent Ice on Thu, 04 February 2021, 21:05:32
March would probably be a better estimate. Tweaks to the case has been made and a prototype will be made after CNY.
As for kitting, most likely a universal plate will be kitted as part of the base purchase and PCB colors will be able to be chosen.
Oh boy, oh boy....now I need to start looking at different keycap sets. Which of the colors are looking to be in the finalized product? And uhh....I'm not going to look for an exact quote on the kit, but I am interested to get a rough over/under on how much my wallet will be crying.
Post by: Groom on Fri, 05 February 2021, 11:48:57
Post by: LaserCrafter on Mon, 08 February 2021, 04:17:50
Post by: Alejo1707 on Mon, 15 February 2021, 12:49:44
Post by: Vibex on Mon, 15 February 2021, 13:30:49
Wish it would support split space bars :'(+1 to this
Every keyboard should support split space bars imo. Yeah it can cause a lot of "extra" holes in the plate, but I would rather have multiple plates to solve that issue.
Post by: Tastenplatte on Mon, 15 February 2021, 14:49:14
Post by: LubedHealios on Thu, 18 February 2021, 19:50:15
Especially if it had a argyle-less pcb but ill have to live with it i guess.
GLWGB and keep up the great work
Post by: DeMechanica on Thu, 18 February 2021, 22:01:05
Post by: Rx003 on Fri, 19 February 2021, 03:25:43
Post by: iamtienng on Fri, 19 February 2021, 13:06:34
Post by: sneakysnek on Sat, 20 February 2021, 01:21:47
Post by: rmllew on Mon, 22 February 2021, 23:49:17
Post by: FishyKeebs on Wed, 24 February 2021, 09:27:19
Post by: shima on Thu, 25 February 2021, 12:44:33
Post by: yukiburzm on Thu, 25 February 2021, 12:47:16
Post by: shima on Sat, 27 February 2021, 10:15:28
Post by: yukiburzm on Mon, 01 March 2021, 01:44:10
Hopefully its in the 80-150$ price range, but if I must, I must.
Post by: Jae-3soteric on Mon, 01 March 2021, 03:29:21
Just a quick update. Argyle is till in progress, following the build stream a few weeks ago we wanted to do one more revision of prototyping. This is currently in manufacturing but was delayed due to CNY. Once we get the final board in a few weeks Seoulcialite and I will provide more details on the GB.
I'm waiting for the Mercutio, but I literally cannot wait to hear more news about this board.
Hopefully its in the 80-150$ price range, but if I must, I must.
Sadly I can guarantee it will not be in this price range. Whilst we will endeavour to make it as affordable as we can, this is still a fully CNC machined case, with some complex geometries for window fitment etc. This can't be produced in a good enough quality at a price point as low as some lasercut acrylic cases.
That being said we will do a PCB only option in some form I'm sure for those that like the Gingham / Mysterium style choices which should be in that price range.
also i was wondering if a discord server was going to be made for argyle soon. if possible, i'd just like a place to talk about this board and what other projects you can bring into the future after argyle
I dont believe Seoulcialite has a discord server, but you can always drop in for a chat on the prototypist server (link at top of page at prototypist.net)
Post by: yukiburzm on Mon, 01 March 2021, 14:14:11
Post by: Bobatype on Mon, 01 March 2021, 23:49:19
(https://i.imgur.com/1f3DKjO.png)
(https://i.imgur.com/1b4Skox.png)
(https://i.imgur.com/qCQpRkX.png)
(https://i.imgur.com/1La3tAT.png)
Post by: TjarleN on Tue, 02 March 2021, 00:23:10
Just some unofficial renders featuring KAT Great Wave (https://geekhack.org/index.php?topic=110310.0), and the Wave (https://geekhack.org/index.php?topic=111411)(Seigaiha) deskmat to show off this gorgeous board.Show Image(https://i.imgur.com/1f3DKjO.png)Show Image(https://i.imgur.com/1b4Skox.png)Show Image(https://i.imgur.com/qCQpRkX.png)Show Image(https://i.imgur.com/1La3tAT.png)
Uhh, WKL is so attractive thanks for making it even harder to decide on layouts :D
Post by: Capptie on Tue, 02 March 2021, 05:02:14
Post by: InvXXVII on Tue, 02 March 2021, 13:21:43
Post by: Lord_Rabel on Tue, 02 March 2021, 14:03:01
Can someone ELI5 what through hole technology is? I did research on thru hole vs standard pcb and still don't understand.
The PCB has holes, and you have can hand solder the components much easier. Many PCBs have SMD components, which are easy for a pick and place machine, but through hole soldering is way more fun doing it by hand. It is just the extra step DIY to say it short. (However many machine-assembled PCB still have TH parts, but I think you get the point)
Post by: InvXXVII on Tue, 02 March 2021, 16:57:21
Can someone ELI5 what through hole technology is? I did research on thru hole vs standard pcb and still don't understand.
The PCB has holes, and you have can hand solder the components much easier. Many PCBs have SMD components, which are easy for a pick and place machine, but through hole soldering is way more fun doing it by hand. It is just the extra step DIY to say it short. (However many machine-assembled PCB still have TH parts, but I think you get the point)
I see. Hence the PCB's bigger footprint right? Because components are soldered on individually instead of "printed/soldered" to the surface of the board? (btw, sick keyboard in your signature)
Post by: Lord_Rabel on Wed, 03 March 2021, 01:05:28
I see. Hence the PCB's bigger footprint right? Because components are soldered on individually instead of "printed/soldered" to the surface of the board? (btw, sick keyboard in your signature)Exactly. The Discipline65 and Mysterium TKL by coseyfrutti have a similar approach
Post by: SpenceFence on Mon, 08 March 2021, 20:17:25
Post by: kioskhill45 on Tue, 16 March 2021, 01:02:51
I'm very excited for this keeb! Jae on the stream said the GB might be shooting for late February. Is this accurate-ish? I might've just been hallucinating since I was very tired.
Also, when the GB goes live, will we be able to mix and match the colors of cases with PCBs, or will they be sold as kitted units?
March would probably be a better estimate. Tweaks to the case has been made and a prototype will be made after CNY.
As for kitting, most likely a universal plate will be kitted as part of the base purchase and PCB colors will be able to be chosen.
Well, we're halfway through march, so I think its a safe time to ask, are you still shooting for a GB this month?
Post by: kioskhill45 on Thu, 01 April 2021, 01:29:24
Sorry for being impatient, but I really would love some updates or anything about this.
Post by: Seoulcialite on Thu, 01 April 2021, 07:00:41
NOW it's safe to say that it won't be happening in March.
Sorry for being impatient, but I really would love some updates or anything about this.
We're at the mercy of the manu unfortunately. We are still waiting for the 2nd prototype but ready to go full speed once we confirm it is satisfactory.
Post by: kioskhill45 on Thu, 01 April 2021, 13:00:09
NOW it's safe to say that it won't be happening in March.
Sorry for being impatient, but I really would love some updates or anything about this.
We're at the mercy of the manu unfortunately. We are still waiting for the 2nd prototype but ready to go full speed once we confirm it is satisfactory.
Well that's all I needed to hear. Thanks for the update!
Post by: dimo on Thu, 01 April 2021, 17:45:22
This idea is really cool. But I don’t think you should have argyle on the PCB. It really forces a distinct design style to the board that will clash with tons of keyset styles.this. get rid of it
Post by: Extra Fox on Thu, 01 April 2021, 21:56:58
I'll have no problem finding a keyset to run on this.
Post by: PuddingPug on Fri, 02 April 2021, 01:44:46
Post by: shima on Fri, 02 April 2021, 19:08:06
NOW it's safe to say that it won't be happening in March.
Sorry for being impatient, but I really would love some updates or anything about this.
We're at the mercy of the manu unfortunately. We are still waiting for the 2nd prototype but ready to go full speed once we confirm it is satisfactory.
What's the new ETA for argyle now? also i kinda agree with removing the argyle design on the pcb. it ruins the simplicity of the keysets. still rooting for argyle to go into gb tho!
GLHF :thumb:
Post by: Starius on Mon, 05 April 2021, 09:06:24
The more unique distinctiveness a keyboard has, the better.
Once you start taking those elements away they all start looking the same.
Post by: Zanhana on Fri, 16 April 2021, 18:05:03
As for the PCB, I'll echo what others have said—split space support would be excellent.
Looking forward to the next proto, hope it goes well!
Post by: Extra Fox on Wed, 21 April 2021, 00:52:50
Post by: Benedikt on Sun, 25 April 2021, 09:30:42
Show Image(https://imgur.com/OfUNBbg.jpg)
This looks sexy as hell
Post by: Seoulcialite on Tue, 04 May 2021, 14:14:33
What's the new ETA for argyle now? also i kinda agree with removing the argyle design on the pcb. it ruins the simplicity of the keysets. still rooting for argyle to go into gb tho!
GLHF :thumb:
No new ETA for now but the 2nd prototype is on its way to Jae right now.
Post by: ♾Ḋḯṩⱥṩẗḝṟ on Wed, 05 May 2021, 06:04:20
No new ETA for now but the 2nd prototype is on its way to Jae right now.
Does he plan to build it on stream?
Post by: notquant on Sun, 09 May 2021, 16:56:46
Post by: ♾Ḋḯṩⱥṩẗḝṟ on Mon, 10 May 2021, 01:10:46
Do you have a discord server where you post updates or should I tuned on this GH thread?
No, I don't think Seoulcialite does have a Discord at the moment. I'm watching the thread every morning, can give you a shout if something happens ;)
Post by: notquant on Mon, 10 May 2021, 12:19:35
Do you have a discord server where you post updates or should I tuned on this GH thread?
No, I don't think Seoulcialite does have a Discord at the moment. I'm watching the thread every morning, can give you a shout if something happens ;)
I'm just new to using GH but am glad to check it regularly for this fantastic project. Thanks for offering regardless ahahahaha.
Post by: charlie_kabe on Tue, 11 May 2021, 19:19:59
Post by: Gavzers on Tue, 11 May 2021, 22:53:30
I love this, pls give interesting colors for cases, maroon? dark green? yellow? just something different please
I'd have to disagree. I think the design is very refined, and might look a bit childish or silly with extravagant colors. I think a black, silver, dark grey, or navy blue would be amazing colors for this board.
Post by: Lel on Sat, 15 May 2021, 03:22:34
Post by: guy0naBuffal0 on Sun, 30 May 2021, 11:54:44
Post by: steelykeeb on Thu, 01 July 2021, 04:29:13
Post by: Friendship on Thu, 01 July 2021, 11:49:02
Post by: ♾Ḋḯṩⱥṩẗḝṟ on Fri, 02 July 2021, 13:56:59
is the project dead or something? its been a while since the last update on gh
I'm not sure. Did ask @Seoulcialite on 5. May if we'll see the new Proto on stream, but didn't get an answer. I also asked Jae in PM twice if he could give an ETA for Argyle Stream, but didn't get an answer :blank:
Post by: Extra Fox on Fri, 02 July 2021, 20:56:52
Still, it would be nice to know what the story is. This is definitely a cool concept that I would really like to see make it to production.
Post by: RubenMcNoobin on Wed, 07 July 2021, 09:09:12
Post by: SwirlCables on Sat, 10 July 2021, 01:03:34
Post by: epixtreme on Wed, 14 July 2021, 03:03:22
Post by: LarryMX on Wed, 21 July 2021, 01:34:52
Post by: Seoulcialite on Sat, 24 July 2021, 05:53:16
Post by: RoyalOak88 on Sat, 24 July 2021, 09:49:57
Post by: Extra Fox on Sat, 24 July 2021, 14:24:59
Just a small update. We're in the process of getting quotes for production. Hopefully next update or two should have details about the GB!Hot dang! That's what I like to hear!
Post by: TheWonderBubble on Sat, 24 July 2021, 16:01:33
Just a small update. We're in the process of getting quotes for production. Hopefully next update or two should have details about the GB!
IT'S NOT DEAD LET'S GOOOOO :D
Post by: Seoulcialite on Sun, 25 July 2021, 00:09:00
Any discord channel to follow the project?
Discord channel will be made once an official announcement for the GB is posted.
Post by: Blackb1rd405 on Sun, 25 July 2021, 08:56:15
Post by: paczki on Tue, 27 July 2021, 16:45:46
Post by: paczki on Tue, 27 July 2021, 16:48:11
Just a small update. We're in the process of getting quotes for production. Hopefully next update or two should have details about the GB!
I'm all in for this!
Post by: shendoo on Tue, 27 July 2021, 20:08:30
Post by: CloudyEyes on Tue, 27 July 2021, 21:34:48
Post by: TheBlackHammer on Tue, 10 August 2021, 23:04:55
Post by: _rubik on Tue, 10 August 2021, 23:17:30
Post by: Lazy_Borzoi on Wed, 18 August 2021, 21:57:52
Post by: switchlab.sg on Wed, 18 August 2021, 22:47:21
Post by: Friendship on Thu, 19 August 2021, 10:34:18
Post by: krey on Thu, 19 August 2021, 11:16:56
Post by: Darthbaggins on Thu, 19 August 2021, 11:25:58
Post by: mrus on Fri, 27 August 2021, 20:17:30
Post by: HappyB0T on Fri, 27 August 2021, 21:37:32
Post by: thestrayed on Sat, 28 August 2021, 01:27:27
Post by: ravenousrhino on Sat, 28 August 2021, 04:19:03
Here for the hope that this will run this year.
Honestly I'd prefer it run next year so I don't get in trouble. :-\
Post by: sabomov on Wed, 01 September 2021, 04:56:25
Post by: beekey on Wed, 01 September 2021, 12:55:12
An HHKB variant of this would be super nice.+1
Post by: cog1to on Mon, 06 September 2021, 07:39:42
Post by: lcheng15 on Wed, 08 September 2021, 13:51:15
Post by: kameron on Thu, 09 September 2021, 16:05:10
Post by: HappyB0T on Thu, 16 September 2021, 16:47:32
Post by: nathanchere on Fri, 17 September 2021, 04:49:29
I keep seeing this board in quite a few keycap GB. Always a good sign ;)
Not really indicative of anything other than that it looks nice so people still pick it for renders to show off proposed caps. Once the model is out there they aren't going to stop using it just because the project died.
Post by: steelykeeb on Fri, 17 September 2021, 06:42:55
as much as I hate admitting it this project has to be dead at this pointI keep seeing this board in quite a few keycap GB. Always a good sign ;)
Not really indicative of anything other than that it looks nice so people still pick it for renders to show off proposed caps. Once the model is out there they aren't going to stop using it just because the project died.
Post by: jagger27 on Fri, 17 September 2021, 12:55:34
Post by: DaaDaa on Tue, 21 September 2021, 18:18:21
man, if only this was a 65%/had an arrow cluster support. I hope this run is successful, maybe then we'll get 65+ in the future :)
no no ... shoo shoo .... take your dirty 65% business somewhere else.
Post by: Transistor on Sat, 16 October 2021, 13:59:16
Keep up the good work.
;)
Thank you,
Transistor
Post by: pixelpusher on Tue, 19 October 2021, 09:32:33
Wow! Great work! Do you know when I could buy it(Im sorry for being impatient). I doesn't have to be accurate. Also do you have a price range for this keyboard (I was looking for around $150-ish max).
Keep up the good work.
;)
Thank you,
Transistor
Er... well we've all felt this way for about a year and a half now, so I wouldn't expect the keyboard to materialize any time soon. As far as price, I can't imagine it being under $200, so it's probably more than you're wanting to spend. My bet is somewhere around $280-$350, depending on the number of boards made.
Post by: TheWonderBubble on Tue, 19 October 2021, 13:46:38
Wow! Great work! Do you know when I could buy it(Im sorry for being impatient). I doesn't have to be accurate. Also do you have a price range for this keyboard (I was looking for around $150-ish max).
Keep up the good work.
;)
Thank you,
Transistor
Oh, my sweet summer child...
Post by: Transistor on Tue, 19 October 2021, 18:03:04
Wow! Great work! Do you know when I could buy it(Im sorry for being impatient). I doesn't have to be accurate. Also do you have a price range for this keyboard (I was looking for around $150-ish max).
Keep up the good work.
;)
Thank you,
Transistor
Er... well we've all felt this way for about a year and a half now, so I wouldn't expect the keyboard to materialize any time soon. As far as price, I can't imagine it being under $200, so it's probably more than you're wanting to spend. My bet is somewhere around $280-$350, depending on the number of boards made.
Oh no no no no :eek: Unfortunately my wallet will not allow :(
Post by: springr0ll on Wed, 20 October 2021, 04:09:21
Post by: Neptune Keys on Wed, 20 October 2021, 06:26:54
Post by: dmattr on Sun, 24 October 2021, 01:46:12
Post by: chindino on Sun, 31 October 2021, 23:08:57
as much as I hate admitting it this project has to be dead at this pointI keep seeing this board in quite a few keycap GB. Always a good sign ;)
Not really indicative of anything other than that it looks nice so people still pick it for renders to show off proposed caps. Once the model is out there they aren't going to stop using it just because the project died.
Post by: SmitH1y on Tue, 02 November 2021, 10:13:05
Post by: Esos on Thu, 04 November 2021, 06:26:40
Post by: clickyblob on Thu, 04 November 2021, 07:06:03
Post by: Alejo1707 on Thu, 04 November 2021, 15:15:27
Looks like it's not dead as per Prototypist's September update. Yayas much as I hate admitting it this project has to be dead at this pointI keep seeing this board in quite a few keycap GB. Always a good sign ;)
Not really indicative of anything other than that it looks nice so people still pick it for renders to show off proposed caps. Once the model is out there they aren't going to stop using it just because the project died.
Wait, so is it dead or not? :'(
Post by: chindino on Sat, 06 November 2021, 19:45:26
Wait, so is it dead or not? :'(Well, in September, Jae mentioned a few upcoming GBs they have yet to start preparing for. Argyle was one of them. See this https://discord.com/channels/556953560835686431/559678236481814548/882665268919283752
Post by: Alejo1707 on Mon, 08 November 2021, 06:38:21
Wait, so is it dead or not? :'(Well, in September, Jae mentioned a few upcoming GBs they have yet to start preparing for. Argyle was one of them. See this https://discord.com/channels/556953560835686431/559678236481814548/882665268919283752
I am sorry sir, could you please direct me to such Discord server? I am not there apparently, so I cannot see those messages. Would love to be kept up to date on this project.
Post by: ravenousrhino on Mon, 08 November 2021, 06:54:22
https://discord.gg/qm944aC
Post by: Alejo1707 on Mon, 08 November 2021, 10:31:58
Try this link to the Prototypist discord
https://discord.gg/qm944aC
You are a godsend my fellow enthusiast.
Post by: DaaDaa on Sat, 20 November 2021, 08:41:41
Post by: Bernkastel on Sun, 02 January 2022, 02:23:22
Post by: Seoulcialite on Fri, 07 January 2022, 11:30:22
Sorry for lack of updates but that was due to well... any real progress until now.
I am hoping to post the following concrete details within the next week: pricing, options, and GB date (we are shooting for next month!).
Also, I'd like to announce that Alexotos should be streaming a prototype build before the start of the GB so probably towards the end of this month.
I believe the only change made from the prototype Alex will be building and the final version is the type of bumpon (circular feet in the proto vs. rectangular feet in the final).
Post by: Tinoo46 on Fri, 07 January 2022, 11:42:03
Post by: ylothar on Fri, 07 January 2022, 12:32:49
Can you find another proxy for Europe. ProtoTypist ist in UK so pretty much not usefull for any other country in Europe since UK is not anymore in the EU? Keygem is a nice Proxy.
+1 :thumb:
Seoulcialite please consider an additional real EU Proxy, thank you!
Post by: DAIgenerate on Sat, 08 January 2022, 05:27:40
Post by: h40 on Sat, 08 January 2022, 10:57:31
Post by: depressedkeebs on Sun, 09 January 2022, 12:02:52
Post by: DaaDaa on Sun, 09 January 2022, 15:16:28
Post by: NoteMakoti on Sun, 09 January 2022, 21:05:48
lol ive been waiting for this board and checking this thread every few months for almost two years and after many many disappointments, i was convinced that it is just a render that someone made and there is no substance to it really hope that this comes to fruition and i will join day 1.They had a proto on stream a few months back
Post by: Visionaire on Mon, 10 January 2022, 12:21:30
are there any renders of the silkscreened pcb? the renders look really dope without em.
Photos of what the PCB looks like are here:
https://imgur.com/Sb2zUJ0.jpg
lol ive been waiting for this board and checking this thread every few months for almost two years and after many many disappointments, i was convinced that it is just a render that someone made and there is no substance to it really hope that this comes to fruition and i will join day 1.
It's going to be a thing. Alexotos mentioned on stream yesterday that he'll be building an Argyle soon. I don't see it on his published schedule yet, but I'd stay tuned for more there.
Post by: h40 on Mon, 10 January 2022, 13:08:31
are there any renders of the silkscreened pcb? the renders look really dope without em.
Photos of what the PCB looks like are here:
https://imgur.com/Sb2zUJ0.jpg
This looks great, I'm even more excited. These pictures should be added to OP.
Post by: Visionaire on Mon, 10 January 2022, 14:22:44
Post by: TheWonderBubble on Fri, 14 January 2022, 18:35:50
Hi everyone!
Sorry for lack of updates but that was due to well... any real progress until now.
I am hoping to post the following concrete details within the next week: pricing, options, and GB date (we are shooting for next month!).
Also, I'd like to announce that Alexotos should be streaming a prototype build before the start of the GB so probably towards the end of this month.
I believe the only change made from the prototype Alex will be building and the final version is the type of bumpon (circular feet in the proto vs. rectangular feet in the final).
YOOOOO IT'S ACTUALLY HAPPENING?
Man, I'd all but completely given up on this. So excited to see it coming to life in full! ;D
Post by: DaaDaa on Tue, 25 January 2022, 02:15:41
Post by: Gearbar on Thu, 27 January 2022, 23:38:27
Post by: hottrout on Fri, 28 January 2022, 04:25:50
Post by: spedywin on Sat, 29 January 2022, 02:05:00
Post by: marici22 on Sat, 29 January 2022, 04:39:18
Post by: Seoulcialite on Sun, 30 January 2022, 01:05:45
Post by: Nurseh on Sun, 30 January 2022, 01:27:20
Post by: notquant on Sun, 30 January 2022, 02:08:00
Post by: ankit on Sun, 30 January 2022, 02:29:25
Post by: Seoulcialite on Sun, 30 January 2022, 23:39:18
Post by: DaaDaa on Sun, 30 January 2022, 23:46:30
:cool:
Post by: ylothar on Mon, 31 January 2022, 01:56:46
Post by: NarniaEve on Mon, 31 January 2022, 06:25:44
Post by: beekey on Mon, 31 January 2022, 12:01:41
100% in for HHKB.Oh, please, yes!
Post by: xenos on Mon, 31 January 2022, 18:06:12
It would be nice to have split spacebar support. The gingham doesn't have it either and I've been looking at through-hole keyboards the past few days.
Post by: Zrloth on Mon, 31 January 2022, 21:16:08
Post by: swift on Tue, 01 February 2022, 13:17:12
Post by: DaaDaa on Tue, 01 February 2022, 16:53:41
Since the project seems pretty close to GB as of recent updates, is there a price estimate on what this board will cost? Thank you for all of the time you put into this beautiful keyboard, I hope I can afford it :)just under $400 as of now but im sure they will find ways to make it even more expensive by the gb date.
Post by: Scriba on Wed, 02 February 2022, 10:06:13
Post by: Jewpac Shakur on Thu, 03 February 2022, 13:12:50
Gimmie that discord channel :eek:
Post by: Blackb1rd405 on Thu, 10 February 2022, 19:59:11
Post by: ylothar on Sat, 12 February 2022, 03:40:37
Currently drafting the GB post!
"currently"? :p
Post by: steelykeeb on Sat, 12 February 2022, 04:33:33
yeah as much as i love this keyboard im worried about the keyboard this isn't the first time where he says something's gonna be done within days/weeks but in ends up taking months or years i understand that covid isn't making this any easier but he really should update the ic page every week/month it makes me scared of getting the keyboard since he barley gives any updates and doesn't even have a discord serverCurrently drafting the GB post!
"currently"? :p
Post by: Zeelobby on Sat, 12 February 2022, 08:10:04
I mean I'm 99% sure this is being run through vendors, so once it's in their hands there's really little responsibility for him.yeah as much as i love this keyboard im worried about the keyboard this isn't the first time where he says something's gonna be done within days/weeks but in ends up taking months or years i understand that covid isn't making this any easier but he really should update the ic page every week/month it makes me scared of getting the keyboard since he barley gives any updates and doesn't even have a discord serverCurrently drafting the GB post!
"currently"?
Sent from my Pixel 3 XL using Tapatalk
Post by: Kleepeterson on Sat, 12 February 2022, 19:00:33
Post by: Seoulcialite on Sat, 12 February 2022, 23:57:45
Post by: ylothar on Sun, 13 February 2022, 03:46:41
Post by: Seoulcialite on Sun, 13 February 2022, 07:05:01
are there any renders of the silkscreened pcb? the renders look really dope without em.
I have decided to remove the argyle pattern from the PCB. As others have suggested, the pattern could clash with the colors, novelties, and theme of some keysets.
Post by: Seoulcialite on Sun, 13 February 2022, 07:05:56
100% in for HHKB.
I'm sorry to announce that only the standard layout will be offered for the GB, at least for the first round.
Post by: madcap11 on Sun, 13 February 2022, 20:25:45
Post by: Seoulcialite on Mon, 14 February 2022, 07:55:09
GB Thread has been approved.
Post by: guy0naBuffal0 on Tue, 15 February 2022, 16:45:56
Post by: TjarleN on Tue, 15 February 2022, 23:15:11
Is that sweet orange going to be a production option? I thought I saw this keeb was only white and black at one point. Would LOVE that orange!
The orange was a one-off for Alex, available color options are navy, silver, white and black