Author Topic: Bud/Honeywell Hall Effect Keypads (~30) (Read 34902 times)

HaaTa · « **Reply #50 on:** Tue, 09 October 2012, 20:58:43 »

In the past I've been following up with people after I get access to my stock. Unfortunately, I've been getting busier and busier. So once January comes, please remind me again.

(In case I'm going to run out, the order requested here will still count)

RougeR · « **Reply #51 on:** Wed, 10 October 2012, 19:25:55 »

Quote from: HaaTa on Tue, 09 October 2012, 20:58:43

In the past I've been following up with people after I get access to my stock. Unfortunately, I've been getting busier and busier. So once January comes, please remind me again.

(In case I'm going to run out, the order requested here will still count)

thats cool, will remind you next year. Put me down for one.

fl0w3n · « **Reply #52 on:** Wed, 10 October 2012, 23:02:56 »

Quote from: HaaTa on Tue, 24 May 2011, 21:20:37

Oh, and if anyone has a Fujitsu Peerless. I would be willing to trade...yup you heard me.

And the last custom version is accounted for. It'll cost quite a bit more for 1-off ones from here on out.

I actually have one sitting here...let's trade. FKB4725-501?

Dgsbllx · « **Reply #53 on:** Thu, 11 October 2012, 03:02:27 »

PM sent! Really hoping I can grab one of these.

bdc1987 · « **Reply #54 on:** Thu, 11 October 2012, 07:57:04 »

I'm not interested but I wanted to comment that these are very cool, and that I work in the factory that these were made in. In fact the area I work in now is where all the plastic molding was done for the key caps.

HaaTa · « **Reply #55 on:** Tue, 05 February 2013, 15:06:44 »

Sorry, I was supposed to get email notifications on changes to this thread...BUT SOMEHOW THEY WERE DISABLED, not acceptable (\end_rage)...

Anyways, very cool bdc1987. Any details you'd care to spare about the factory?

And, if people were wondering, I DO, have some more of the keypads. I still need to do a count of my inventory (in storage atm), but I believe there are enough for all of the request so far.
If I have NOT respond to your PM, I am sorry, email notifications were also turned off there (*grumble*). Please send me another PM, I should respond within the day. Otherwise PM me on IRC, and barring me doing social things like drinking to my sorrows that the email notifications were turned off, I should respond within a few hours..

If you can solder, I highly recommend doing it yourself. It saves me time, and is pretty easy.

bdc1987 · « **Reply #56 on:** Tue, 05 February 2013, 16:53:40 »

Well now the factor still makes a lot of switches, I don't know what all of them go to but I do know we make things for Boeing, Bell Helicopter, the military, Caterpillar, and many others I don't know the names of. I wish I could afford one of these I think it would be cool to have a piece of history from the place I work. Well I could probably afford just the keypad but not one that would be functional with todays computers without the mods you were able to do.

HaaTa · « **Reply #57 on:** Tue, 05 February 2013, 16:57:30 »

All you need is a soldering iron and a Teensy. The mod itself is quite easy, it's not absolute beginner soldering, but it's pretty close.

I price the mod a bit high as I want to encourage people to do the mod themselves (saves me time, and is a good intro to working with a Teensy).

Dgsbllx · « **Reply #58 on:** Tue, 05 February 2013, 17:00:48 »

Another PM sent!

AKIMbO · « **Reply #59 on:** Tue, 05 February 2013, 17:07:06 »

Oh wow NIB hall effect tenkey. An accountant/keyboard geek's wet dream!

dorkvader · « **Reply #60 on:** Tue, 05 February 2013, 19:29:34 »

Quote from: HaaTa on Tue, 05 February 2013, 16:57:30

All you need is a soldering iron and a Teensy. The mod itself is quite easy, it's not absolute beginner soldering, but it's pretty close.

I price the mod a bit high as I want to encourage people to do the mod themselves (saves me time, and is a good intro to working with a Teensy).

The main reason I didn't want one is because I wanted a working one, and the mod price was too high. I'm well acquainted with soldering, but what code does the teensy run? Can you PM me a link to it?

I'm very interested in this if I can DIY a controller. I have the teensy, etc.

HaaTa · « **Reply #61 on:** Tue, 05 February 2013, 19:42:47 »

My code needs a quick sanity check, but it's the same code I use to make all my USB converters/controllers. I've been working on it since early 2011.

https://gitorious.org/kiibohd-controller

Also, I recently added Teensy 3.0 support to my codebase (though only 1 Scan module is fully supported right now).

adrock · « **Reply #62 on:** Sun, 10 February 2013, 16:53:10 »

sent you a pm.

Internetlad · « **Reply #63 on:** Mon, 11 February 2013, 17:35:47 »

talk about a blast from the past. These are really cool but, as much as I'd love to have one for the collection, it's probably another thing that will just clutter up the house and never get used/appreciated.

GLWS, i'm sure you won't have an issue moving them all tout suite.

HaaTa · « **Reply #64 on:** Mon, 11 February 2013, 21:36:31 »

FYI all. The keypads are virtually sold out. A few reserved keypads have not been paid for yet, but I am expecting payment soonish.

Those who have PM'd me already have priority in the cancellation queue.

Halverson · « **Reply #65 on:** Mon, 11 February 2013, 21:44:45 »

Quote from: HaaTa on Mon, 11 February 2013, 21:36:31

FYI all. The keypads are virtually sold out. A few reserved keypads have not been paid for yet, but I am expecting payment soonish.

Those who have PM'd me already have priority in the cancellation queue.

We've talked in pms, am I still in line to get one?

HaaTa · « **Reply #66 on:** Mon, 25 February 2013, 21:18:10 »

So, I have two keypads left, and the people who I had them reserved for haven't responded back...
Gave you guys enough time. If you can organize payment before the other 2 in line...one is yours.

4LI4Z and salmo, I'll be PM'ing you about details.

HaaTa · « **Reply #67 on:** Fri, 01 March 2013, 22:45:58 »

And to all, the keypads are now sold out.

Thanks all, for sustaining this really long sale

I may have one more keypad up for grabs eventually (with a controller), but I'll probably use it for a contest or something.

Halverson · « **Reply #68 on:** Fri, 01 March 2013, 23:10:55 »

Make me a controller and ill send you money

Oh and a Chinese IBM controller would be nice too

Or is it a converter? Either way

HaaTa · « **Reply #69 on:** Fri, 01 March 2013, 23:13:52 »

I may be able to make a controller for you (keypad), dunno if I can get to it before I fly to Japan for my bike trip though.

As for the Chinese IBM, well gotta wait until at least September when I'm back in California.

Halverson · « **Reply #70 on:** Fri, 01 March 2013, 23:20:02 »

Just bring me along for the bike trip!

HaaTa · « **Reply #71 on:** Fri, 01 March 2013, 23:23:43 »

Do you feel comfortable biking more than 3000 km?

Though, it'll be pretty chill, since my trip is about 90 days long.

Halverson · « **Reply #72 on:** Sat, 02 March 2013, 01:39:12 »

Quote from: HaaTa on Fri, 01 March 2013, 23:23:43

Do you feel comfortable biking more than 3000 km?
Though, it'll be pretty chill, since my trip is about 90 days long.

I'll rent a moped and chill

Dgsbllx · « **Reply #73 on:** Tue, 26 March 2013, 07:23:31 »

Mine arrived in the UK today. Only emailed you the other day asking where it had got to

Thanks a lot!

RougeR · « **Reply #74 on:** Tue, 26 March 2013, 07:35:52 »

mmm will see if mines here

prguy45 · « **Reply #75 on:** Tue, 15 March 2016, 16:52:58 »

I wonder if you have spare switches. I need a few to repair printing press controls.

romevi · « **Reply #76 on:** Tue, 15 March 2016, 16:54:21 »

Quote from: prguy45 on Tue, 15 March 2016, 16:52:58

I wonder if you have spare switches. I need a few to repair printing press controls.

What the heck. I got all excited 'cause I thought this was a new thread. Way to crash my dreams.

BaconEggandCheeseBagel · « **Reply #77 on:** Tue, 15 March 2016, 17:50:58 »

Shucks, this would have been so awesome for a home theatre set up as control!

Sad there are none left ;(

KaminKevCrew · « **Reply #78 on:** Wed, 16 March 2016, 03:33:26 »

Quote from: romevi on Tue, 15 March 2016, 16:54:21

Quote from: prguy45 on Tue, 15 March 2016, 16:52:58
I wonder if you have spare switches. I need a few to repair printing press controls.

What the heck. I got all excited 'cause I thought this was a new thread. Way to crash my dreams.

I know!!! I got so excited I just sent him a PM... That is just a mean thing to do.

JaccoW · « **Reply #79 on:** Wed, 16 March 2016, 03:45:58 »

This is the worst necro.

Halverson · « **Reply #80 on:** Wed, 16 March 2016, 05:08:32 »

The switches feel so goooood

livingspeedbump · « **Reply #81 on:** Wed, 16 March 2016, 15:07:53 »

so want one of these!

Pm'd

Bromono · « **Reply #82 on:** Wed, 16 March 2016, 15:11:24 »

/sigh

romevi · « **Reply #83 on:** Wed, 16 March 2016, 15:18:29 »

Quote from: livingspeedbump on Wed, 16 March 2016, 15:07:53

so want one of these! Pm'd

Have you checked the dates, lsb?

whitey1600 · « **Reply #84 on:** Mon, 04 March 2024, 10:28:19 »

We are in need of one of these on a thermoformer. I know this post is old, any help to a forum newbie would be much appreciated.

I PMd you.

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: Bud/Honeywell Hall Effect Keypads (~30) (Read 34902 times)