Author Topic: [GB] Mech27-TKL v1 Canadian Custom | 100% Shipped | CLOSED AND FINISHED  (Read 201372 times)

0 Members and 1 Guest are viewing this topic.

Offline gaiden

  • Posts: 343
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #100 on: Sat, 17 September 2016, 08:58:43 »
I've just sent out an email to everyone who has preordered.
O I c wasn't aware of a pre order round, I hope I will get an invoice from 27 this next few days perhaps?

Sent from my SM-G925T using Tapatalk



27,  how come there was no red? Would've been awesome with Red/Silver very Canadian 😀

Sent from my SM-G925T using Tapatalk


Just need to get my SSL Cert installed on the host and then I can start sending out invoices.

And there wasn't very much interest in red during the IC process.
Wow I think this board would look so cool in
-Gold Top
-Red Bottom
-Gold Plate
-with the Gold Insert

Even though that's a bit Ironman-ish but can you imagine?

Sent from my SM-G925T using Tapatalk


Offline Funtast

  • Posts: 41
  • Location: Russian Federation
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #101 on: Sat, 17 September 2016, 10:51:01 »
Hello!
When the invoices will be sent out ?
And will some ordered list ? :cool:

Offline airs

  • Posts: 329
  • Location: Seattle, WA, USA
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #102 on: Sat, 17 September 2016, 11:25:41 »
I've just sent out an email to everyone who has preordered.

I filled out the google form yesterday - should I have gotten an email already, or did you just mean people that put a deposit down?
Octagon v2, LZ CLS

Offline joey

  • Posts: 2296
  • Location: UK
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #103 on: Sat, 17 September 2016, 11:26:33 »
I've just sent out an email to everyone who has preordered.

I filled out the google form yesterday - should I have gotten an email already, or did you just mean people that put a deposit down?
That e-mail was just for the people did the deposit. Since we didn't pick colours yet.

Offline gaiden

  • Posts: 343
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #104 on: Sat, 17 September 2016, 11:27:15 »
I've just sent out an email to everyone who has preordered.

I filled out the google form yesterday - should I have gotten an email already, or did you just mean people that put a deposit down?
Ya that's what 27 meant. Pre-orders gets first response and the rest gets heir invoices in a few days

Sent from my SM-G900T using Tapatalk


Offline joey

  • Posts: 2296
  • Location: UK
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #105 on: Sat, 17 September 2016, 11:29:24 »
Pre-orders get invoices the same time as everyone else.

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #106 on: Sat, 17 September 2016, 12:51:08 »
Pre-orders will get the invoices at the same time as everyone else, I just sent out an email with a separate form for them so I can keep track better.
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline gaiden

  • Posts: 343
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #107 on: Sat, 17 September 2016, 12:53:05 »
Nice to know. Busy 2nd guessing myself on colors.. How fun

Sent from my SM-G900T using Tapatalk


Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #108 on: Sun, 18 September 2016, 14:26:47 »
If you were in the preorder make sure to check your email for the form.  There's a few people who haven't yet filled it out.


In total we have 65 responses right now, with 9 preorders who have not yet filled out the form on top of that.  I'm going to try and start invoicing during the week, so keep an eye on your emails.
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline boo

  • Posts: 249
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #109 on: Sun, 18 September 2016, 14:41:08 »
just submitted - i am part of the preorders =]

Offline repuls0r

  • Posts: 70
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #110 on: Sun, 18 September 2016, 14:48:58 »
Would it be possible to have a spreadsheet list of all the current people who have submitted, received invoice, paid invoice and etc? I think this way everyone can keep track much easier.
Matrix 8XV1.0  |  FMJ 80  |  SKOG  |  TGR Jane CE  |  Orion V2  |  Mech27  |  LZCP  |  TXCP  |  CPSQ  |  TX1800

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #111 on: Sun, 18 September 2016, 14:51:48 »
Would it be possible to have a spreadsheet list of all the current people who have submitted, received invoice, paid invoice and etc? I think this way everyone can keep track much easier.

I'll throw something together in the OP that I manually update.
« Last Edit: Sun, 18 September 2016, 15:03:14 by 27 »
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #112 on: Sun, 18 September 2016, 15:08:20 »
« Last Edit: Sun, 18 September 2016, 15:09:55 by 27 »
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline oatmicro

  • Posts: 352
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #113 on: Sun, 18 September 2016, 15:28:12 »
Can I assemble it without Acrylic Spacer?

Thank you for the answer.  :-*

Offline joey

  • Posts: 2296
  • Location: UK
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #114 on: Sun, 18 September 2016, 15:29:19 »
Can I assemble it without Acrylic Spacer?

Thank you for the answer.  :-*
No.

Offline SevenU

  • Posts: 46
  • Location: Michigan
  • Grimace is Black
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #115 on: Sun, 18 September 2016, 17:31:35 »
I'll fill out my pre-order form tomorrow.

Sent from my KIW-L24 using Tapatalk

Something, Something, blah, blah, blahbitty, blah

Offline gaiden

  • Posts: 343
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #116 on: Sun, 18 September 2016, 18:24:36 »
hi is there no option for Winkey?   :'(

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #117 on: Sun, 18 September 2016, 18:34:26 »
hi is there no option for Winkey?   :'(

Nope.  Only winkeyless.
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline Funtast

  • Posts: 41
  • Location: Russian Federation
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #118 on: Mon, 19 September 2016, 00:36:55 »
Hey Ya!
Can I change the color of the case ?
When ordered , the plans were a little different, and I was in a hurry .

Offline Chachal

  • Posts: 38
  • Location: Poland
    • Keyboard Wear
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #119 on: Mon, 19 September 2016, 00:49:02 »
Will we have a chance to change our color choice once we get to see a sample of all colors?

Sorry wodan, there's only the pictures of the gold, black, and silver due to pink and cyan being custom colours.

If you pm me before the 25th you can make any changes you want.


Wysłane z mojego GT-I9301I przy użyciu Tapatalka


Pok3r (MX Clear)

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #120 on: Mon, 19 September 2016, 07:45:25 »
Hey Ya!
Can I change the color of the case ?
When ordered , the plans were a little different, and I was in a hurry .

Yupp, just pm me :)
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #121 on: Mon, 19 September 2016, 11:14:08 »
Invoicing SHOULD start tomorrow.  Please make sure to pay your invoice as soon as possible.  If there is a need to pay through paypal, please pm me.
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline six_chains

  • Posts: 61
  • Location: NYC
  • Looking for fashion bae.
    • Visual Art
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #122 on: Mon, 19 September 2016, 21:04:43 »
is an order still possible?? i just tried submitting


I guess it's closed ;[[
OP please lmk if any orders drop out.
« Last Edit: Mon, 19 September 2016, 21:17:48 by six_chains »
 

Model M JIS Silver Label  --  Exent  -- Apple IIs ALPS -- Poker II Granite R1

Offline KoalaKaiser

  • Posts: 60
  • Location: Third state to join the Union.
  • I make onions cry.
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #123 on: Mon, 19 September 2016, 23:41:20 »
Stoked for this. Can't wait to get my hands all over it.

Offline Bucky

  • Posts: 171
  • Location: Kirkland, WA
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #124 on: Mon, 19 September 2016, 23:43:04 »
Joined (assuming its still open)

Offline Karura

  • Professional Canadian
  • * Destiny Supporter
  • Posts: 1574
  • Location: Canada
  • SKidata life.
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #125 on: Tue, 20 September 2016, 00:14:59 »


Could I ask what is the silvery/translucent mid layer thing?

I was hoping to see if it can be assembled together without a seam like that.

Edit:

Is it possible to use the keyboard without the acrylic spacer in the middle, and are shorter screws included with the kit to support that?
« Last Edit: Tue, 20 September 2016, 00:20:40 by Karura »

"Remember boys, raccoon cold... don't worry, raccoon will find cave." -Sent

Offline slickmamba

  • Posts: 651
  • Location: SF
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #126 on: Tue, 20 September 2016, 00:22:10 »
Show Image


Could I ask what is the silvery/translucent mid layer thing?

I was hoping to see if it can be assembled together without a seam like that.

Edit:

Is it possible to use the keyboard without the acrylic spacer in the middle, and are shorter screws included with the kit to support that?

27 said it needs to have the layer.

how is it mounted on the top that requires it to need the spacer?
Hi :)

Offline loud_asian

  • Posts: 591
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #127 on: Tue, 20 September 2016, 00:39:06 »
Show Image


Could I ask what is the silvery/translucent mid layer thing?

I was hoping to see if it can be assembled together without a seam like that.

Edit:

Is it possible to use the keyboard without the acrylic spacer in the middle, and are shorter screws included with the kit to support that?

27 said it needs to have the layer.

how is it mounted on the top that requires it to need the spacer?

Total shot in the dark but it looks like the bottom part of the case is too shallow to support the switches + PCB.

https://i.imgur.com/Dp6EvEl.png This picture also shows the mounts on the top case, which don't look that deep either
EM7 | Nunu | Salamander | RF84u | SS AEK64

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #128 on: Tue, 20 September 2016, 06:06:51 »
Show Image


Could I ask what is the silvery/translucent mid layer thing?

I was hoping to see if it can be assembled together without a seam like that.

Edit:

Is it possible to use the keyboard without the acrylic spacer in the middle, and are shorter screws included with the kit to support that?

27 said it needs to have the layer.

how is it mounted on the top that requires it to need the spacer?

Total shot in the dark but it looks like the bottom part of the case is too shallow to support the switches + PCB.

https://i.imgur.com/Dp6EvEl.png This picture also shows the mounts on the top case, which don't look that deep either
Bingo.
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #129 on: Tue, 20 September 2016, 06:42:44 »
is an order still possible?? i just tried submitting


I guess it's closed ;[[
OP please lmk if any orders drop out.

It shouldnt be closed, I'll fix that during/after class
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #130 on: Tue, 20 September 2016, 06:53:14 »
Just checked on the form in incognito mode, and it's fully functional.  If you're having issues pm me and we can manually put in your order.
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline gaiden

  • Posts: 343
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #131 on: Tue, 20 September 2016, 07:08:25 »
Hi 27 do you have any non-render photos of your case in separate pieces and in assembled form?

Sent from my SM-G900T using Tapatalk


Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #132 on: Tue, 20 September 2016, 07:13:42 »
Hi 27 do you have any non-render photos of your case in separate pieces and in assembled form?

Sent from my SM-G900T using Tapatalk

I have the pictures in the OP,  as well as these: http://imgur.com/a/XZbDo where you can see why it needs a spacer.  The acrylic spacer is currently in the mail, and should be here by the end of the week.
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline gaiden

  • Posts: 343
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #133 on: Tue, 20 September 2016, 07:16:24 »
Hi 27 do you have any non-render photos of your case in separate pieces and in assembled form?

Sent from my SM-G900T using Tapatalk

I have the pictures in the OP,  as well as these: http://imgur.com/a/XZbDo where you can see why it needs a spacer.  The acrylic spacer is currently in the mail, and should be here by the end of the week.
Nice! You are making me think twice about the gold plate. Looks great!

Sent from my SM-G900T using Tapatalk


Offline six_chains

  • Posts: 61
  • Location: NYC
  • Looking for fashion bae.
    • Visual Art
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #134 on: Tue, 20 September 2016, 12:08:29 »
Hi 27 do you have any non-render photos of your case in separate pieces and in assembled form?

Sent from my SM-G900T using Tapatalk

I have the pictures in the OP,  as well as these: http://imgur.com/a/XZbDo where you can see why it needs a spacer.  The acrylic spacer is currently in the mail, and should be here by the end of the week.


 :thumb: that gold plate looks soo good.. can't wait.
Personally, I hope the cyan is on the lighter/tint side.
 

Model M JIS Silver Label  --  Exent  -- Apple IIs ALPS -- Poker II Granite R1

Offline KetchyKech

  • Posts: 656
  • Location: New York
  • ∴∵∴◇❖◇∴∵∴
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #135 on: Tue, 20 September 2016, 12:12:47 »
Hi 27 do you have any non-render photos of your case in separate pieces and in assembled form?

Sent from my SM-G900T using Tapatalk

I have the pictures in the OP,  as well as these: http://imgur.com/a/XZbDo where you can see why it needs a spacer.  The acrylic spacer is currently in the mail, and should be here by the end of the week.


 :thumb: that gold plate looks soo good.. can't wait.
Personally, I hope the cyan is on the lighter/tint side.

me n' you both  :thumb:  I did cyan everythang  :-*
∴∵∴◇Time TKL--VE.A--F&T 1916--Cajal--Octagon v2◇∴∵∴

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #136 on: Tue, 20 September 2016, 12:19:51 »
Black case with silver plate for me; going to look so clean. Also got an extra black plate in case I want to change things up; wish a second PCB was offered.
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #137 on: Tue, 20 September 2016, 12:25:26 »
Black case with silver plate for me; going to look so clean. Also got an extra black plate in case I want to change things up; wish a second PCB was offered.
No space in the packaging :(
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline WarCommand

  • Posts: 115
  • Location: USA
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #138 on: Tue, 20 September 2016, 12:39:33 »
Cyan on cyan with a black plate for me.

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #139 on: Tue, 20 September 2016, 12:44:13 »
Invoicing should start tonight, I'm waiting on some setting to propagate, and then we should be good to go.  Gotta have a secure checkout for you guys.
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #140 on: Tue, 20 September 2016, 13:02:57 »
Invoicing should start tonight, I'm waiting on some setting to propagate, and then we should be good to go.  Gotta have a secure checkout for you guys.

How are you doing invoicing? Through your site or PayPal?
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #141 on: Tue, 20 September 2016, 13:08:08 »
Invoicing should start tonight, I'm waiting on some setting to propagate, and then we should be good to go.  Gotta have a secure checkout for you guys.

How are you doing invoicing? Through your site or PayPal?

Through my site, and special cases through paypal
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #142 on: Tue, 20 September 2016, 13:11:48 »
Through my site, and special cases through paypal

And what does the time window look like for payment? Sorry for all the questions.
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline Chachal

  • Posts: 38
  • Location: Poland
    • Keyboard Wear
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #143 on: Tue, 20 September 2016, 13:15:41 »
"Anyone who does not pay within 72 hours of being sent the invoice will be dropped and the form will reopen to fill those spots." - from order page

Pok3r (MX Clear)

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #144 on: Tue, 20 September 2016, 13:21:46 »
"Anyone who does not pay within 72 hours of being sent the invoice will be dropped and the form will reopen to fill those spots." - from order page

Absolutely final date for payments will be the 25th

Thanks! Just found this.
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline Bucky

  • Posts: 171
  • Location: Kirkland, WA
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #145 on: Tue, 20 September 2016, 15:52:14 »
Since this isn't paypal is there any recourse if **** hits the fan at some point?

Offline slickmamba

  • Posts: 651
  • Location: SF
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #146 on: Tue, 20 September 2016, 16:25:45 »
Show Image


Could I ask what is the silvery/translucent mid layer thing?

I was hoping to see if it can be assembled together without a seam like that.

Edit:

Is it possible to use the keyboard without the acrylic spacer in the middle, and are shorter screws included with the kit to support that?

27 said it needs to have the layer.

how is it mounted on the top that requires it to need the spacer?

Total shot in the dark but it looks like the bottom part of the case is too shallow to support the switches + PCB.

https://i.imgur.com/Dp6EvEl.png This picture also shows the mounts on the top case, which don't look that deep either
Bingo.

Damn wish we had the choice. Still excited to see what it looks like with the insert in. Any update on the pink or cyan?
Hi :)

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #147 on: Tue, 20 September 2016, 20:03:44 »
Invoicing should start tonight, I'm waiting on some setting to propagate, and then we should be good to go.  Gotta have a secure checkout for you guys.

How are you doing invoicing? Through your site or PayPal?

Through my site, and special cases through paypal

So invoice instructions/directions for your site should be expected to go to our emails tonight?


Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #148 on: Tue, 20 September 2016, 20:06:48 »
Just curious as to how many boards we are at now  :)
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [GB] Mech27-TKL v1 Canadian Custom | OPEN
« Reply #149 on: Tue, 20 September 2016, 22:56:53 »
Invoicing should start tonight, I'm waiting on some setting to propagate, and then we should be good to go.  Gotta have a secure checkout for you guys.

How are you doing invoicing? Through your site or PayPal?

Through my site, and special cases through paypal

So invoice instructions/directions for your site should be expected to go to our emails tonight?


Not anymore, my host is being ****ity so the SSL Cert isn't validating.  I'm going to have to set up paypal through my site now, so hopefully tomorrow it will be going out.  This is a learning experience for me, so I'll be clearing up those issues in future buys.

Just curious as to how many boards we are at now  :)
About 75

Since this isn't paypal is there any recourse if **** hits the fan at some point?
Since it looks like we're switching to paypal you won't need to worry, but stripe provides a system similar to paypals buyer protection, as well as your bank/cc provider.


IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/