Author Topic: [GB] Golbat Round 2 (Final Round) - SHIPPING SOON  (Read 30300 times)

0 Members and 1 Guest are viewing this topic.

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
[GB] Golbat Round 2 (Final Round) - SHIPPING SOON
« on: Tue, 10 January 2017, 13:57:21 »
YYou should be receiving an invoice to the SAME email you used to pay for your original Golbat invoice.

DO NOT BE ALARMED BY THE AMOUNT OF THE INVOICE.

I've set the invoice to allow **partial payments** so that the same invoice can be used regardless of your shipping location and in the end if I need to quote you a price you just make a partial payment in the amount of the quote.

This lets me still receive your shipping information with a single default invoice and I can mark the invoice as complete after the partial payment is made.

If you **DID NOT** get your invoice for shipping message me immediately with the email you used for the Golbat R2 original payment, the invoice number and your order details (color / plate / add-ons)

Thanks! If you have any other questions post below because I'm sure they've passed through someone else's mind too!

Shipping period is July 15th to 24th. Please pay before the 14th so that I can prepare address labels for before I go!

The shipping address I will be using is the shipping address that I will be getting with your SHIPPING INVOICE PAYMENT (the new invoice). So if you've moved / changed addresses do not worry! (Last time I went by the original address that I received months earlier and it was a mess when people moved!)


Edit: If you had special arrangements you wanted made please remind me of them THIS WEEK so I don't forget.

More
https://goo.gl/forms/rrIuKUyXj3klRe5P2 <- Form link

Make sure to read all the information in the form header to avoid confusion.
 
Some notes about the Golbat:
The golbat keyboard is a 40% keyboard in either "standard" or "HHKB" format.
 
Feel free to visit the interest check thread https://geekhack.org/index.php?topic=84742.0
Also feel free to visit this link for an example of the HHKB style Golbat. http://imgur.com/a/vF6ca
 
Key differences from Round 1:
1) Upgraded PCB with RGB underlighting.
2) Carbon Fibre options.
3) Higher price (increased costs / fees that we missed last time).
4) Ability to purchase only the HHKB plate without having to buy the standard plate.
5) Ability for more layers in the firmware
 
New pricing (all in USD):
Base kit (with either HHKB or Normal plate): $99. Note, for R1 the HHKB kit was always additional on the base kit with normal plate, this is no longer the case. You can purchase EITHER the HHKB or Normal 40% top plate in the base kit.
Additional metal plate (HHKB or Normal): $20
Upgrade to black carbon fibre for the base kit: $25
Upgrade from black carbon fibre to other color (requires the upgrade to black carbon fibre): $5
Add another carbon fibre plate in any color or style: $30
Additional acrylic mid section (any color): $18 23 (UPDATED 10/1/2017! Didn't account for the cost of acrylic in the insurance / fees)
RGB Leds: FREE! (Will be presoldered)
NOTE: Last time shipping from China was billed separately but now it's included in the base kit price.

 
Some things to consider:
Last time a lot of people noted that the images for the acrylic did not accurately reflect the acrylic they received. The biggest issue was that the acrylic turned out much more opaque than expected. Consider ordering both a transparent acrylic (you have RGB LEDs stock on the PCB) as well as an acrylic in the color of your choice. Or just a transparent acrylic and rely on the underglow. Or something that in the images looks more transparent than you'd want.
We do not sell individual parts without the base kit. This was requested in the past and both GFW and I agreed that organising for lots of little parts would be too much.
The board is manufactured wholly in China (where it is also designed).
It will be shipped to me in Canada where I will ship it to the buyers.
In-switch LEDs are standard and not RGB.
This purchase does not include switches or in-switch LEDs (PCB lighting is included as well as diodes + resistors).
Last time GFW was kind enough to throw in a little toolkit and some spare parts (screws, diodes, etc.) however there is no foreseeable third round for the Golbat. That being said I will order spare parts and keep them on hand for emergencies. The spare parts will only be black aluminum, PCBs, transparent acrylic. There are simply too many options for acrylic and case plates to cover everything.
 
If you have any other questions feel free to leave them below and I'll try and answer them. I extended the length of time for the form to be open from feedback last time so I can get more questions answered and make sure nobody misses it :)

Other notes: I've been kind of out of the mechkeyboard game for a few months due to finding my "end game" and just being extremely busy with school and work. But I look forward to posting more pictures and such!
« Last Edit: Sat, 08 July 2017, 12:37:46 by GL1TCH3D »

Offline jgodinez302

  • Posts: 64
  • Location: Ridgecrest, CA
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #1 on: Wed, 11 January 2017, 14:28:09 »
what is the expected lead time for production and shipping?

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #2 on: Wed, 11 January 2017, 21:42:41 »
what is the expected lead time for production and shipping?

Shipping ended up a bit later than expected last time. I'm going to say April-May since I'm a bit more organized from the experience of R1.

Offline stoic-lemon

  • Posts: 970
  • Location: Saitama, Japan
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #3 on: Sat, 14 January 2017, 02:51:34 »
On the form where it lists the colours for aluminium, black is there, but it's not available as an option or on the photos. I'm guessing this is an error. If I want black or red then carbon fibre is my only option?

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #4 on: Tue, 17 January 2017, 11:07:09 »
On the form where it lists the colours for aluminium, black is there, but it's not available as an option or on the photos. I'm guessing this is an error. If I want black or red then carbon fibre is my only option?

Black aluminum is available. As well as black carbon fiber

Offline johntron25

  • Posts: 131
  • Location: 31st State
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #5 on: Tue, 17 January 2017, 12:42:23 »
Do you think you will be able to ship these out before April? My lease ends on that month and I have to move out is why i'm asking. Cheers.

Offline Skuloth

  • Posts: 525
  • Location: Minneapolis MN
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #6 on: Thu, 19 January 2017, 11:10:46 »
I can't remember, do the PCBs support full size spacebars?
Planck w/ Zealios

Offline smithyithy

  • Posts: 308
  • Location: UK
  • a l p s
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #7 on: Thu, 19 January 2017, 17:10:59 »
Looking to order..

Q: How is the RGB controlled / how customisable is it?

KBD75; Alps64 trio; some other stuff

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #8 on: Fri, 20 January 2017, 13:05:59 »
I can't remember, do the PCBs support full size spacebars?

Yup, either split spacebar or fullsized.

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #9 on: Fri, 20 January 2017, 13:06:45 »
Looking to order..

Q: How is the RGB controlled / how customisable is it?

Check out the programming thread for it:

https://geekhack.org/index.php?topic=86635

Offline smithyithy

  • Posts: 308
  • Location: UK
  • a l p s
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #10 on: Fri, 20 January 2017, 14:24:57 »
Looking to order..

Q: How is the RGB controlled / how customisable is it?

Check out the programming thread for it:

https://geekhack.org/index.php?topic=86635

Thanks dude, I think I'm gonna put an order in :)
KBD75; Alps64 trio; some other stuff

Offline PriusProblems

  • Posts: 133
  • Location: United Kingdom
  • No ISO, no interest.
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #11 on: Thu, 26 January 2017, 13:36:12 »
Which acrylics should I be looking at if I want a (heavily) "tinted car window" look? 5021 is looking like the best bet right now, there are others but I'm thinking that they are brown-tinged?

Edit: I'm not sure how bright the LEDS in the photo of 5021 are, would the underglow LEDS be as bright (or brighter)?
« Last Edit: Thu, 26 January 2017, 13:37:59 by PriusProblems »

Offline CapnHighlands

  • Posts: 39
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #12 on: Sat, 28 January 2017, 10:28:02 »
Just submitted an order -  hopefully I'm just in time.

EDIT: I'm a dingus so I submitted two updated orders - the most recent one (where I call myself a 'nuisance') is the proper one.
« Last Edit: Sat, 28 January 2017, 10:55:51 by CapnHighlands »

Offline PriusProblems

  • Posts: 133
  • Location: United Kingdom
  • No ISO, no interest.
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #13 on: Sat, 28 January 2017, 16:09:40 »
Just submitted an order -  hopefully I'm just in time.

EDIT: I'm a dingus so I submitted two updated orders - the most recent one (where I call myself a 'nuisance') is the proper one.
The buy is open until the 31st right? I still need to choose my Acrylic colour...

Offline CapnHighlands

  • Posts: 39
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #14 on: Sat, 28 January 2017, 16:23:03 »
Just submitted an order -  hopefully I'm just in time.

EDIT: I'm a dingus so I submitted two updated orders - the most recent one (where I call myself a 'nuisance') is the proper one.
The buy is open until the 31st right? I still need to choose my Acrylic colour...

The form is still up and payments aren't due till the 31st, so I would assume so.

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #15 on: Sat, 28 January 2017, 16:44:15 »
I'll be extending the period to pay but the form itself closes the 31st.

Offline PriusProblems

  • Posts: 133
  • Location: United Kingdom
  • No ISO, no interest.
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #16 on: Sat, 28 January 2017, 16:45:19 »
I'll be extending the period to pay but the form itself closes the 31st.
Got it. Thanks dude.

Any advise re: my acrylic question?

Offline CapnHighlands

  • Posts: 39
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #17 on: Sat, 28 January 2017, 16:47:00 »
I'll be extending the period to pay but the form itself closes the 31st.

Hey quick question, does the carbon fiber upgrade apply to both the top plate and the bottom? Second, can I have the LEDs not added to mine, or do they come like that from the supplier?

EDIT: Also one thing I'm a bit confused about is the plate layout for HHKB. It supports split space, I'm assuming, but do I have to specify that anywhere?
« Last Edit: Sat, 28 January 2017, 16:59:11 by CapnHighlands »

Offline Grimspoon

  • Posts: 62
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #18 on: Sat, 28 January 2017, 20:01:55 »
Can I confirm if my order went through correctly?

I'll PM you my paypal address if that helps. I filled out the form with my username here but when I check the form now it doesn't say response recorded or submitted, just takes me to a fresh form.

Really wanna get in on this.
« Last Edit: Sat, 28 January 2017, 20:40:47 by Grimspoon »

Offline CapnHighlands

  • Posts: 39
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #19 on: Sat, 28 January 2017, 20:20:27 »
Sent you the final PM GL1TCH3D, sorry about all that, I can be a bit indecisive. Looking forward to this!

Offline Halverson

  • Traitor Supreme
  • Posts: 6806
  • GIRLSHARK WIZBRO
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #20 on: Sat, 28 January 2017, 20:27:33 »
Can I confirm if my order went through correctly?

My PayPal address is

Really wanna get in on this.

You don't wanna post your email like that, should remove it and pm him!

Offline Grimspoon

  • Posts: 62
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #21 on: Sat, 28 January 2017, 20:46:14 »

You don't wanna post your email like that, should remove it and pm him!

Appreciate the heads up, I'm not overly cautious about my email though, that's public info easily found across too many forums and accounts all over the internet. You ever notice me posting my passwords or anything like that then you know I dun goofed.  ;D ;D ;D

Offline Halverson

  • Traitor Supreme
  • Posts: 6806
  • GIRLSHARK WIZBRO
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #22 on: Sat, 28 January 2017, 20:48:09 »

You don't wanna post your email like that, should remove it and pm him!

Appreciate the heads up, I'm not overly cautious about my email though, that's public info easily found across too many forums and accounts all over the internet. You ever notice me posting my passwords or anything like that then you know I dun goofed.  ;D ;D ;D

Hehe just making sure! :D

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #23 on: Sun, 29 January 2017, 02:47:44 »
I'll be extending the period to pay but the form itself closes the 31st.

Hey quick question, does the carbon fiber upgrade apply to both the top plate and the bottom? Second, can I have the LEDs not added to mine, or do they come like that from the supplier?

EDIT: Also one thing I'm a bit confused about is the plate layout for HHKB. It supports split space, I'm assuming, but do I have to specify that anywhere?

Split spacebar and standard spacebar are supported either way. There's no specific plate for the split spacebar or anything. The same
PCB is used in any setup.


I'll be extending the period to pay but the form itself closes the 31st.
Got it. Thanks dude.

Any advise re: my acrylic question?

Generally the photos make the acrylic seem a bit brighter / more transparent than what you'd see IRL from underlighting on the board.

Can I confirm if my order went through correctly?

I'll PM you my paypal address if that helps. I filled out the form with my username here but when I check the form now it doesn't say response recorded or submitted, just takes me to a fresh form.

Really wanna get in on this.

I made it so the form starts fresh so that people aren't changing / editing their orders while I'm invoicing to cause confusions. In the end you'll get what's listed in the invoice (I list all the parts / colors) so if the invoice isn't what you want contact me ASAP.

Offline CapnHighlands

  • Posts: 39
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #24 on: Sun, 29 January 2017, 08:29:36 »
I haven't received an invoice yet so I'm not sure if I placed my order yet, either. I've sent you a PM to confirm this.

Offline PriusProblems

  • Posts: 133
  • Location: United Kingdom
  • No ISO, no interest.
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #25 on: Sun, 29 January 2017, 09:01:20 »
I'll be extending the period to pay but the form itself closes the 31st.
Got it. Thanks dude.

Any advise re: my acrylic question?

Generally the photos make the acrylic seem a bit brighter / more transparent than what you'd see IRL from underlighting on the board.


Thanks. I've messaged you on reddit re: untracked shipping.

Offline Grimspoon

  • Posts: 62
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #26 on: Sun, 29 January 2017, 15:55:14 »


Can I confirm if my order went through correctly?

I'll PM you my paypal address if that helps. I filled out the form with my username here but when I check the form now it doesn't say response recorded or submitted, just takes me to a fresh form.

Really wanna get in on this.

I made it so the form starts fresh so that people aren't changing / editing their orders while I'm invoicing to cause confusions. In the end you'll get what's listed in the invoice (I list all the parts / colors) so if the invoice isn't what you want contact me ASAP.

Alright, good to know that. I did message you on Reddit about invoices being sent out a few days ago, you said to anticipate having more sent out this weekend. I still haven't been invoiced which is why I was concerned that maybe my order didn't go through.

Just want to get things squared away. I always like to make my payments as promptly as possible.

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #27 on: Mon, 30 January 2017, 21:55:25 »
Slipping in to put the forms in before this closes.

Offline brizzzle

  • Posts: 54
  • Location: PNW
  • ipee9932cd
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #28 on: Mon, 30 January 2017, 22:37:49 »
I haven't received an invoice for mine. Just want to make sure I grab one before I miss it again. I'll pm to confirm.

Offline PriusProblems

  • Posts: 133
  • Location: United Kingdom
  • No ISO, no interest.
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #29 on: Tue, 31 January 2017, 00:11:41 »
Forgot to submit yesterday, how many more hours is this open for?

Edit: Submitted on the train. :thumb:
« Last Edit: Tue, 31 January 2017, 01:43:18 by PriusProblems »

Offline stoic-lemon

  • Posts: 970
  • Location: Saitama, Japan
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #30 on: Thu, 02 February 2017, 20:00:45 »
I'm a bit worried about how reliable the software on this board is, and how active the developers are to issues. Is this board easy to flash? Were there any issues with the first board that have now been fixed.

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Taking orders
« Reply #31 on: Sun, 05 February 2017, 14:02:24 »
Invoices are going out today. Please check the invoice before paying to make sure the right parts are listed and that none of the parts show as $0 (specifically the additional top plate line). Better to fix the invoice before paying than have to refund and issue a new one.

If you don't get an invoice and you know you submitted an order, PM me.

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [GB] Golbat Round 2 (Final Round) - Invoicing
« Reply #32 on: Sun, 05 February 2017, 14:33:50 »
Could I get the link showing the acrylic color options again so I can verify the number I put in each order?

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Invoicing
« Reply #33 on: Sun, 05 February 2017, 15:52:39 »
For those that need it:

Colors:
Aluminum:sliver, black, pink, blue, green,purple, gold http://imgsrc.baidu.com/forum/pic/item/9ec0381f95cad1c8298f95cd7a3e6709c83d51b6.jpg

Acrylic:you can choose the colors in this link:http://item.taobao.com/item.htm?spm=a1z10.1-c.w137644-66242819.2.ZNnbyp&id=19615052779

Carbon Fiber (and PCB render): http://imgur.com/a/2cuTs

I've also opened a new discussion with GFW about the firmwares on the website provided. I'll update about that as I get info.

Offline exitfire401

  • * Global Moderator
  • Posts: 2969
  • Location: United States
  • The Force is Re/\l
Re: [GB] Golbat Round 2 (Final Round) - Invoicing
« Reply #34 on: Tue, 07 February 2017, 13:08:28 »
Paid. Missed the invoice email. Sorry for the delay.
Boards: Kingsaver Complicated Blue Alps |Sprit 60% Transparent MX Clears in Gateron housings with 62g gold Sprit springs lubed and RGB color shifting LEDs | Ducky Shine Zone MX Black with Blue LEDs | Realforce 10AE Variable Silenced

B/S/T thread: https://geekhack.org/index.php?topic=55351.0

Past projects: KBT Race 2 L.E.
Past Boards: Ducky Shine 2 | KBT Pure | LZ Aluminum Skin| HHKB | Realforce 23u |

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [GB] Golbat Round 2 (Final Round) - Invoicing
« Reply #35 on: Wed, 08 February 2017, 21:27:55 »
Apologies, I had been out for work. Just paid the invoices!

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Invoicing
« Reply #36 on: Fri, 10 February 2017, 13:30:19 »
I sent out all the invoices from the main order forms.

Going to work on all the changes to invoices / special invoices this weekend.

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Invoicing
« Reply #37 on: Tue, 21 February 2017, 06:51:36 »
I sent out reminders to all the members who haven't paid for their orders yet.

I will be closing all unpaid invoices and preparing the order for GFW. I will contact you if there were issues with the order. Otherwise, if there were no issues, I will submit the order this Friday.

Thanks to everyone that participated. I originally said that this is the last round of golbat so there would be almost no access to spare parts but GFW and I have potentially new products so replacement parts could come from there. I will still keep spare parts on hand for immediate replacements though.

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Invoicing
« Reply #38 on: Sun, 05 March 2017, 15:01:00 »
Update time

Order has been submitted. Obviously this means no changes to individual orders.

 :thumb:

Offline tobsn

  • Posts: 216
Re: [GB] Golbat Round 2 (Final Round) - Invoicing
« Reply #39 on: Tue, 14 March 2017, 19:53:18 »
Update time

Order has been submitted. Obviously this means no changes to individual orders.

 :thumb:

can't wait! :D

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #40 on: Wed, 22 March 2017, 16:55:16 »
I'll be out of town for a week for job training (got a nice job!) so if you need to reach me then discord is best at @GL1TCH3D#9762

Its basically better skype / teamspeak and runs in a browser.

I have not been getting email notifications lately from PMs on GH but knowing that I try and check the GB threads and PMs regularly if any questions or situations arise. I ordered 3 full base kits (out of pocket) as spare parts should people have defects. Ill be inspecting the kits when they arive and checking them against the order before shipping.

This time around I want to have a confirmation / exit survey to make sure your board / kit works when you receive it because I had people PMing me that they bought R1 units secondhand on ebay that were DOA so to make sure everyone gets a working unit, do check the package asap when you receive it. Its a long way out because its still in manufacturing.

Cheers


Offline stoic-lemon

  • Posts: 970
  • Location: Saitama, Japan
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #41 on: Wed, 22 March 2017, 23:57:00 »
I never got an updated invoice, so I guess I missed out on this.

Offline GL1TCH3D

  • Thread Starter
  • Posts: 1117
  • Location: Quebec, Canada
  • Audiophile, tea lover and now keyboard hugger!
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #42 on: Thu, 23 March 2017, 05:07:57 »
I never got an updated invoice, so I guess I missed out on this.
If there's a leftover base kit I can sell it at the group buy price. Otherwise last round 2 people sold their orders so it is always possible.

Offline Greatfirewall

  • Posts: 49
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #43 on: Mon, 27 March 2017, 09:03:32 »
2017.4.18
The aluminum plates: on the way.
Pcb: on the way.
The acrylic mid : Get
Carbon plate: Producting and will be shipped these day.
2017.4.2
Have buy all those small parts.
2017.3.31
Have sent the acrylic mid section list to the factory.It will take about 10 days to product and ship.
2017.3.27
Have sent the aluminum plates order to the factory. It will take about 20 days to product.
Have got the sample of the new PCB. Here is the picture:
164041-0
164043-1
 
« Last Edit: Tue, 18 April 2017, 07:16:34 by Greatfirewall »

Offline William_S_Jones

  • Posts: 721
  • Location: Charlotte, NC
  • Best Prime Ever!!!
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #44 on: Tue, 28 March 2017, 20:58:57 »
2017.3.27
Have sent the aluminum plates order to the factory. It will take about 20 days to product.
Have got the sample of the new PCB. Here is the picture:
(Attachment Link)
(Attachment Link)

Beautiful, I'm loking forward to receiving. It's also great that production looks to be moving along quicker than rd 1.

Offline Grimspoon

  • Posts: 62
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #45 on: Sat, 08 April 2017, 19:38:28 »
Edit I cannot read! Plz send halp.
« Last Edit: Sat, 08 April 2017, 19:43:45 by Grimspoon »

Offline William_S_Jones

  • Posts: 721
  • Location: Charlotte, NC
  • Best Prime Ever!!!
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #46 on: Sat, 15 April 2017, 21:39:22 »
2017.4.2
Have buy all those small parts.
2017.3.31
Have sent the acrylic mid section list to the factory.It will take about 10 days to product and ship.
2017.3.27
Have sent the aluminum plates order to the factory. It will take about 20 days to product.
Have got the sample of the new PCB. Here is the picture:
(Attachment Link)
(Attachment Link)
Good day Greatfirewall, can you provide w/ an update on Golbat40 rd2? Look forward to hearing from you & hope all is well.

Sent from my KFGIWI using Tapatalk


Offline Greatfirewall

  • Posts: 49
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #47 on: Sat, 22 April 2017, 09:37:15 »
2017.4.22
Get the pcb
2017.4.18
The aluminum plates: on the way.
Pcb: on the way.
The acrylic mid : Get
Carbon plate: Producting and will be shipped these day.
2017.4.2
Have buy all those small parts.
2017.3.31
Have sent the acrylic mid section list to the factory.It will take about 10 days to product and ship.
2017.3.27
Have sent the aluminum plates order to the factory. It will take about 20 days to product.
Have got the sample of the new PCB. Here is the picture:
(Attachment Link)
(Attachment Link)

Offline Greatfirewall

  • Posts: 49
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #48 on: Mon, 01 May 2017, 00:52:02 »
2017.5.1
All have done. 顺丰( the logistics company in China)have taken them away.
顺丰:929743784073
They will ship the package to a international logistics company.
I will update the logisitics information when they start shipping to US or Canada.
167350-0

There will be a new project with the package. Here is the link:
https://geekhack.org/index.php?topic=85137.0
167341-1
« Last Edit: Mon, 01 May 2017, 03:56:37 by Greatfirewall »

Offline William_S_Jones

  • Posts: 721
  • Location: Charlotte, NC
  • Best Prime Ever!!!
Re: [GB] Golbat Round 2 (Final Round) - Order Submitted
« Reply #49 on: Tue, 02 May 2017, 01:06:52 »
2017.5.1
All have done. 顺丰( the logistics company in China)have taken them away.
顺丰:929743784073
They will ship the package to a international logistics company.
I will update the logisitics information when they start shipping to US or Canada.
(Attachment Link)

There will be a new project with the package. Here is the link:
https://geekhack.org/index.php?topic=85137.0
(Attachment Link)
Thanks for the update, I'm looking forward to my Golbats!

Sent from my KFGIWI using Tapatalk