Author Topic: [GB] E8-V1 Custom TKL - SORTING THE BOARDS  (Read 570004 times)

0 Members and 1 Guest are viewing this topic.

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #150 on: Wed, 15 February 2017, 22:30:19 »
I'm sorting the orders.
I will update the spreadsheet today.

I will reply all you guys later.  ;)

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #151 on: Thu, 16 February 2017, 00:51:12 »
About Assembly options:

We can support you with:

* Switches:

- All kinds of new Cherry Switches and Gaterons.
- Zealios Round 5: we can order from Zeal for you, but only arrive in April/May.
- MOD-H (from Originative): we can order them for you, but we never have them in hand, so we do not know about quality and other things.
- Cherry Black from Wyse keyboard: 90s vintage cherry blacks. After desoldering, all switches will be cleaned by Ultrasonic, then tune with Dupont Krytox Lube. (mixed 103 and 205)
- Chery Black from Cherry G80-0577: true 80s vintage blacks, Screw in stabs, fully cleaned and tuned
- Cherry MX Clears from Cherry G80-8000.

Old Cherry switches only available for orders with full tuning (lube, spring swap, w or w/o stickers, hotswap LEDs) and not for sale separately. We only use Krytox lube, mixing from 103 and 205.


* Stabilizer:
 - Original Cherry PCB mount Stab
- Zeal Transparent Gold PCB mount (need to wait for GB)
- Sprit Gold Stab PCB mount
- and we may have some GMK screw stab PCB mount left. We do not test them yet, can not say about the quality and feeling.

* Springs:
all kinds from Sprit inlucde steel and gold and winkeyless.kr springs (sorry, no GON spring).


About timing: We can only start assembling when we receive plates and PCBs from the factory. It means that you have to wait longer than buyers who only order DIY kit. It takes about 2 days for soldering and testing for each board (and longer for the boards that require lubing switches). All keyboards using Zealios have to wait until Zealpc send out Round5. So you'll have to wait 1 week to 4 weeks depends on your order number on the list.

We will also have a speadsheet to update the assembly process.
« Last Edit: Thu, 16 February 2017, 01:06:25 by jhoang »

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #152 on: Thu, 16 February 2017, 01:01:16 »
So those of us who are not participating in an assembly process will not be able to buy those vintage blacks? :(

let me know if we can work something out, id love to get my hands on some!!
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #153 on: Thu, 16 February 2017, 01:02:37 »
So those of us who are not participating in an assembly process will not be able to buy those vintage blacks? :(

let me know if we can work something out, id love to get my hands on some!!

Good call! Interested in this as well. Had a great source for vintage black switches that dried up. Reminds me of college.....

Offline mmdango

  • Posts: 49
  • Location: California, US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #154 on: Thu, 16 February 2017, 02:20:15 »
Oh wow did not know vintage blacks would be an option! I might change my mind about no assembly then... Could you give an estimate of the assembly cost with vintage blacks?

Offline whentheclouds

  • Posts: 613
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #155 on: Thu, 16 February 2017, 02:24:46 »
About Assembly options:

We can support you with:

- Cherry Black from Wyse keyboard: 90s vintage cherry blacks. After desoldering, all switches will be cleaned by Ultrasonic, then tune with Dupont Krytox Lube. (mixed 103 and 205)
- Chery Black from Cherry G80-0577: true 80s vintage blacks, Screw in stabs, fully cleaned and tuned

Old Cherry switches only available for orders with full tuning (lube, spring swap, w or w/o stickers, hotswap LEDs) and not for sale separately. We only use Krytox lube, mixing from 103 and 205.

can any vintage blacks expert please enlighten us plebs on the finer differences between 80s and 90s switches?

Offline actualglacier

  • ¯\_(ツ)_/¯
  • Posts: 93
  • 😳
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #156 on: Thu, 16 February 2017, 07:31:39 »
Hello! I have never participated in a GH group buy and this is my first post here too.

Do you offer switch tuning for gaterons as well? Thanks!

EDIT: just submitted a form, didn't realize i could specify everything in the form, whoops!
« Last Edit: Thu, 16 February 2017, 11:34:50 by notglacier »
actualglacier on youtube


Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #157 on: Thu, 16 February 2017, 23:35:19 »
jhoang, what tool will be used for reprogramming?

Also, any word on the white/beige finish?

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #158 on: Fri, 17 February 2017, 09:11:17 »
Hello! I have never participated in a GH group buy and this is my first post here too.

Do you offer switch tuning for gaterons as well? Thanks!

EDIT: just submitted a form, didn't realize i could specify everything in the form, whoops!

welcome to E8-V1 GB.

We can offer Gateron tuning, but it waste money and time.

jhoang, what tool will be used for reprogramming?

Also, any word on the white/beige finish?

Our PCB use BootMapper Client for keymap and drive RGB LEDs.

White (or similar color): still waiting factory confirm  :(.

Good call! Interested in this as well. Had a great source for vintage black switches that dried up. Reminds me of college.....

So those of us who are not participating in an assembly process will not be able to buy those vintage blacks? :(

let me know if we can work something out, id love to get my hands on some!!

both of you are on waiting list  :p

Oh wow did not know vintage blacks would be an option! I might change my mind about no assembly then... Could you give an estimate of the assembly cost with vintage blacks?

now you still can change your mind, or take a slot on waiting list. Maybe we will have some Wyse board  extra.


can any vintage blacks expert please enlighten us plebs on the finer differences between 80s and 90s switches?

Basically, around 1994-1995, Cherry (they have officially confirmed this) changed the material used for the switches. Typically, switches made in the 1980's are considered vintage since these are all before the material change. Ones afterwards are still smooth, but not on the same level as the 1980 ones. However, there are some occasional ones from 1996 which are also very smooth which makes sense as a lot of the vintage boards were not consistent and often time had a mix of switches. Many people claim that the logo is the best indicator of a vintage switch, as in big logo = vintage. I find this to be false and even chyrosran has a video where he disproves this. The best indicator is PCB date, and even still there are some outliers. Hopefully this helped.

thank you so much  :-*

infact, all our wyse board was made beforce 1996, so after tuning, it same with vintage 80s, except the big logo on the top. We will try to have some picture when we have time.
« Last Edit: Fri, 17 February 2017, 09:15:48 by jhoang »

Offline zoomwalt

  • Posts: 117
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #159 on: Fri, 17 February 2017, 10:56:05 »
Submitted my order! Super excited! Managed to contain myself and only order 1 board for now haha

Offline actualglacier

  • ¯\_(ツ)_/¯
  • Posts: 93
  • 😳
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #160 on: Fri, 17 February 2017, 11:11:39 »
Hello! I have never participated in a GH group buy and this is my first post here too.

Do you offer switch tuning for gaterons as well? Thanks!

EDIT: just submitted a form, didn't realize i could specify everything in the form, whoops!

welcome to E8-V1 GB.

We can offer Gateron tuning, but it waste money and time.


Really? I have never tried gateron browns before and now you've got me curious why you'd think it's a waste of time.

Would you also happen to have tactile gateron clears as an option, and is there any way I could verify that my order went through?

Sorry for the dumb questions, thanks!
actualglacier on youtube


Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #161 on: Fri, 17 February 2017, 15:49:40 »
For continued discussion on vintage Cherry switches, please go to this thread:
https://geekhack.org/index.php?topic=87721
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #162 on: Fri, 17 February 2017, 15:58:05 »
jhoang, what tool will be used for reprogramming?

Also, any word on the white/beige finish?

Our PCB use BootMapper Client for keymap and drive RGB LEDs.

White (or similar color): still waiting factory confirm  :(.


With the GB slated to close on the 20th, we won't know if this is an option until it's too late?  :confused:

Offline iArson

  • Posts: 434
  • Location: United States
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #163 on: Fri, 17 February 2017, 15:59:01 »
jhoang, what tool will be used for reprogramming?

Also, any word on the white/beige finish?

Our PCB use BootMapper Client for keymap and drive RGB LEDs.

White (or similar color): still waiting factory confirm  :(.


With the GB slated to close on the 20th, we won't know if this is an option until it's too late?  :confused:
Yeah hopefully we could find out pretty soon. I'd be very interested in either of those colors.


Sent from my iPhone using Tapatalk

Offline ntitco1

  • Posts: 74
  • Location: Singapore
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #164 on: Fri, 17 February 2017, 16:11:44 »
We can offer Gateron tuning, but it waste money and time.

What? Do you mean it needs more money and time or lubing isnt necessary for gateron?

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #165 on: Fri, 17 February 2017, 16:14:12 »
We can offer Gateron tuning, but it waste money and time.

What? Do you mean it needs more money and time or lubing isnt necessary for gateron?

I think what he's saying is that it's unwise to buy Gaterons in general.

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #166 on: Fri, 17 February 2017, 16:15:31 »
We can offer Gateron tuning, but it waste money and time.

What? Do you mean it needs more money and time or lubing isnt necessary for gateron?

Don't quote me on it, but I think I've read that lubricating brand new Gaterons doesn't really make them smoother.  They are supposed to be fairly smooth already.  (I have no personal experience with Gaterons other than 2 sample Zealios switches).
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #167 on: Fri, 17 February 2017, 16:24:11 »
We can offer Gateron tuning, but it waste money and time.

What? Do you mean it needs more money and time or lubing isnt necessary for gateron?

Don't quote me on it, but I think I've read that lubricating brand new Gaterons doesn't really make them smoother.  They are supposed to be fairly smooth already.  (I have no personal experience with Gaterons other than 2 sample Zealios switches).

Maybe I'm just the one saying that it's unwise to buy Gaterons in general :))

Offline Captainbuttmonkey

  • Posts: 319
  • Location: UK
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #168 on: Fri, 17 February 2017, 17:23:56 »
What's with the dislike for Gaterons dude haha? For me Gateron > Cherry every time

Offline actualglacier

  • ¯\_(ツ)_/¯
  • Posts: 93
  • 😳
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #169 on: Fri, 17 February 2017, 17:40:54 »
We can offer Gateron tuning, but it waste money and time.

What? Do you mean it needs more money and time or lubing isnt necessary for gateron?

Don't quote me on it, but I think I've read that lubricating brand new Gaterons doesn't really make them smoother.  They are supposed to be fairly smooth already.  (I have no personal experience with Gaterons other than 2 sample Zealios switches).

I've heard that lubing them makes a slight difference in terms of feel, but huge difference in terms of sound. From what I've heard in typing videos, lubed gaterons seem to be really quiet!
actualglacier on youtube


Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #170 on: Fri, 17 February 2017, 17:46:49 »
jhoang, what tool will be used for reprogramming?

Also, any word on the white/beige finish?

Our PCB use BootMapper Client for keymap and drive RGB LEDs.

White (or similar color): still waiting factory confirm  :(.


With the GB slated to close on the 20th, we won't know if this is an option until it's too late?  :confused:
Yeah hopefully we could find out pretty soon. I'd be very interested in either of those colors.


White/beige was the primary reason that I jumped on this GB...

Offline JDragon

  • Posts: 469
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #171 on: Fri, 17 February 2017, 20:45:16 »
Waiting to hear on beige also. I'd want to pick up a second board if there was a beige option.

Offline gadzkun

  • Posts: 555
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #172 on: Fri, 17 February 2017, 20:46:12 »
while everyone waiting for beige and white, im here anxious waiting for invoice :))

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #173 on: Fri, 17 February 2017, 21:12:57 »
Will there be any new forms to accommodate customizing of the back weight? or anything for founder's edition people to fill out?
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #174 on: Sat, 18 February 2017, 06:15:38 »
Hey there, please check your order here: https://goo.gl/ghB1IL to see if there is any mistake before invoices are going out!

Regarding shipping cost, after talking with some guys over at DHL, it turns out the shipping cost will be way more expensive than what I was told earlier. After considering all the options, I decided to go with EMS (vnpost will be much cheaper but also way too slow and impossible to track outside of VN). Apologies for the small price hike in shipping.

I'm still working with the assembler guy and will update the exact quote on assembly fees and reply to all your pms/questions soon. Cheers.

Offline gt1989

  • Posts: 189
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #175 on: Sat, 18 February 2017, 06:45:25 »
Hey there, please check your order here: https://goo.gl/ghB1IL to see if there is any mistake before invoices are going out!

Regarding shipping cost, after talking with some guys over at DHL, it turns out the shipping cost will be way more expensive than what I was told earlier. After considering all the options, I decided to go with EMS (vnpost will be much cheaper but also way too slow and impossible to track outside of VN). Apologies for the small price hike in shipping.

I'm still working with the assembler guy and will update the exact quote on assembly fees and reply to all your pms/questions soon. Cheers.

If I want to change somethings on my order should I submit another order, or just pm you the changes I want?

Offline gadzkun

  • Posts: 555
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #176 on: Sat, 18 February 2017, 06:53:57 »
Hey there, please check your order here: https://goo.gl/ghB1IL to see if there is any mistake before invoices are going out!

Regarding shipping cost, after talking with some guys over at DHL, it turns out the shipping cost will be way more expensive than what I was told earlier. After considering all the options, I decided to go with EMS (vnpost will be much cheaper but also way too slow and impossible to track outside of VN). Apologies for the small price hike in shipping.

I'm still working with the assembler guy and will update the exact quote on assembly fees and reply to all your pms/questions soon. Cheers.

founder edition got extra brass name plate right? so it means founder edition get 2 name plate in total?
if founder edition get 2 name plate, i have to change my form

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #177 on: Sat, 18 February 2017, 06:58:08 »

If I want to change somethings on my order should I submit another order, or just pm you the changes I want?

Either would be fine, but you should submit another order and put a note because pms can be missed sometimes
Edit: PMs would be better for small changes
« Last Edit: Sat, 18 February 2017, 07:01:56 by jhoang »

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #178 on: Sat, 18 February 2017, 07:06:10 »

founder edition got extra brass name plate right? so it means founder edition get 2 name plate in total?
if founder edition get 2 name plate, i have to change my form

Yes Founders get 2 name plates as default, with the extra brass nameplate engraved "E8-V1 Founders Edtion" - which isn't customizable
« Last Edit: Sat, 18 February 2017, 07:25:55 by jhoang »

Offline gadzkun

  • Posts: 555
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #179 on: Sat, 18 February 2017, 07:27:28 »

founder edition got extra brass name plate right? so it means founder edition get 2 name plate in total?
if founder edition get 2 name plate, i have to change my form

Yes Founders get 2 name plates as default, with the extra brass nameplate engraved "E8-V1 Founders Edtion" - which isn't customizable

pm sent  :-* or should i fill new form? :rolleyes:

wait wait wait wait........ whatttt!!!, is there an option for custom engraved counter weight? i think i mess up my form and dont read it properly cause i really want to get in the founder edition.

nvm i think its just the wrong spreadsheet

i think i need to fill a new form is that ok xD

spreadsheet updated thanks  :thumb:
now just wait for invoice :p
« Last Edit: Sat, 18 February 2017, 08:37:39 by gadzkun »

Offline gt1989

  • Posts: 189
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #180 on: Sat, 18 February 2017, 07:51:17 »
I noticed on the spread sheet that /u/Syalthra from reddit and myself both have 17 as our Founders #.

Offline wholypantalones

  • Posts: 878
  • Location: The Mitten
  • text and icon mods plz.
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #181 on: Sat, 18 February 2017, 12:05:21 »
Is switch top removal an option on the plates?

You mean the engraving name plate?

No, the switch plate. Does it have cut outs for removing switch tops?

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #182 on: Sat, 18 February 2017, 13:04:46 »
I updated my order!!
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline magic_duckie

  • Posts: 3
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #183 on: Sat, 18 February 2017, 13:37:58 »
Updated my order as well!

/u/magic_duckie, #16 founders - resubmitted a form with a note.

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #184 on: Sat, 18 February 2017, 15:50:03 »
Update. I added a note that I'd also like 2 additional name plates, which the form did not allow for.

Offline Sylanthra

  • Posts: 27
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #185 on: Sat, 18 February 2017, 15:50:51 »
Updated my order. Apparently I managed to misspell my user name /u/Syalnthra should be /u/Sylanthra... Also added custom text, but I am wondering it it is too long. What is the length of the text we can use? Will the font simply get smaller that longer the text is?

Offline gt1989

  • Posts: 189
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #186 on: Sat, 18 February 2017, 21:52:50 »

founder edition got extra brass name plate right? so it means founder edition get 2 name plate in total?
if founder edition get 2 name plate, i have to change my form

Yes Founders get 2 name plates as default, with the extra brass nameplate engraved "E8-V1 Founders Edtion" - which isn't customizable

I sent you a pm about an update to my order in regards to these.

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #187 on: Sat, 18 February 2017, 22:00:09 »

founder edition got extra brass name plate right? so it means founder edition get 2 name plate in total?
if founder edition get 2 name plate, i have to change my form

Yes Founders get 2 name plates as default, with the extra brass nameplate engraved "E8-V1 Founders Edtion" - which isn't customizable

pm sent  :-* or should i fill new form? :rolleyes:

wait wait wait wait........ whatttt!!!, is there an option for custom engraved counter weight? i think i mess up my form and dont read it properly cause i really want to get in the founder edition.

nvm i think its just the wrong spreadsheet

i think i need to fill a new form is that ok xD

spreadsheet updated thanks  :thumb:
now just wait for invoice :p

I noticed on the spread sheet that /u/Syalthra from reddit and myself both have 17 as our Founders #.

Updated my order as well!

/u/magic_duckie, #16 founders - resubmitted a form with a note.

Update. I added a note that I'd also like 2 additional name plates, which the form did not allow for.

Updated my order. Apparently I managed to misspell my user name /u/Syalnthra should be /u/Sylanthra... Also added custom text, but I am wondering it it is too long. What is the length of the text we can use? Will the font simply get smaller that longer the text is?

I have just updated your orders! Please check it again.  ;)

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #188 on: Sat, 18 February 2017, 22:03:45 »
I updated my order!!

There are two problems:
1. Founders Edition is forced to use BRASS Counterweight. If you want to get another Aluminium RED Counterweight, please get it as extra.  :p
2. Your custom text is too long. It should be less than 22 characters.  :D

Please submit another form. I will update your order later.  :thumb:

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #189 on: Sat, 18 February 2017, 22:04:38 »
Is switch top removal an option on the plates?

You mean the engraving name plate?

No, the switch plate. Does it have cut outs for removing switch tops?

No. It cannot be removable switches.  :p

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #190 on: Sat, 18 February 2017, 22:17:09 »
I updated my order!!

There are two problems:
1. Founders Edition is forced to use BRASS Counterweight. If you want to get another Aluminium RED Counterweight, please get it as extra.  :p
2. Your custom text is too long. It should be less than 22 characters.  :D

Please submit another form. I will update your order later.  :thumb:

Will I be able to engrave the red counterweight with the text
"We Can Find Strength In Our Hidden Emotions"?
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #191 on: Sat, 18 February 2017, 22:54:23 »
Update. I added a note that I'd also like 2 additional name plates, which the form did not allow for.

I have just updated your orders! Please check it again.  ;)

Thanks. Just to confirm, the "gift" nameplate is the same as the "designed" one that had the E8-V1 logo on it? and Adlai, that all of mine are that way?

Cheers

Offline Faux

  • Posts: 111
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #192 on: Sun, 19 February 2017, 01:40:03 »
Did white never go through?

Offline actualglacier

  • ¯\_(ツ)_/¯
  • Posts: 93
  • 😳
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #193 on: Sun, 19 February 2017, 03:27:02 »
Just updated my order (keponii). How do you edit the engraving for the non-extra name plates? I wanted the dark grey one to be blank and have the red (non-extra) one be custom engraved.

I edited it to "NOTGLACIER (red plate) , E8-V1 (silver plate)" just in case!

Thanks!
actualglacier on youtube


Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #194 on: Sun, 19 February 2017, 08:15:14 »
Did white never go through?

I highly doubt it ='[

Offline Faux

  • Posts: 111
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #195 on: Sun, 19 February 2017, 16:05:57 »
I also updated my order. If White/Beige goes through, I would want to change to one of those, so lmk if that ever happens.

Offline magic_duckie

  • Posts: 3
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #196 on: Sun, 19 February 2017, 17:17:44 »

Updated my order as well!

/u/magic_duckie, #16 founders - resubmitted a form with a note.

I have just updated your orders! Please check it again.  ;)

My order does not look like it was updated on the form :/

Offline vari_mu

  • Posts: 4
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #197 on: Sun, 19 February 2017, 18:30:34 »
Just got in! My first post and first custom board. Pretty excited!  :thumb:

Offline actualglacier

  • ¯\_(ツ)_/¯
  • Posts: 93
  • 😳
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #198 on: Mon, 20 February 2017, 06:15:07 »
Just updated the form again (keponii - reddit), I corrected a typo and added another name plate.
« Last Edit: Mon, 20 February 2017, 06:51:32 by notglacier »
actualglacier on youtube


Offline KetchyKech

  • Posts: 656
  • Location: New York
  • ∴∵∴◇❖◇∴∵∴
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS - ORDERS LIST UPDATED
« Reply #199 on: Mon, 20 February 2017, 06:23:03 »
ordered a dark blue for a friend, and was going to go in myself had the white gone through  :'(

still excited  :cool: !
∴∵∴◇Time TKL--VE.A--F&T 1916--Cajal--Octagon v2◇∴∵∴