Author Topic: [GB] E8-V1 Custom TKL - SORTING THE BOARDS  (Read 570021 times)

0 Members and 1 Guest are viewing this topic.

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #50 on: Fri, 10 February 2017, 13:54:34 »
Can we get a list of the founders edition winners? Also, where is the PCB from?

I will update the list tomorrow. But 50 orders have been placed.  :p
PCB made by my team. Made in China.  ;)

Offline iArson

  • Posts: 434
  • Location: United States
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #51 on: Fri, 10 February 2017, 13:55:53 »
Can we get a list of the founders edition winners? Also, where is the PCB from?

I will update the list tomorrow. But 50 orders have been placed.  :p
PCB made by my team. Made in China.  ;)
Is the PCB software going to be available prior?


Sent from my iPhone using Tapatalk

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #52 on: Fri, 10 February 2017, 13:57:29 »
Can we get a list of the founders edition winners? Also, where is the PCB from?

I will update the list tomorrow. But 50 orders have been placed.  :p
PCB made by my team. Made in China.  ;)
Is the PCB software going to be available prior?


Sent from my iPhone using Tapatalk

Yes, You can use BootMapperClient. Easy and friendly.

Offline alveeno

  • Posts: 182
  • Location: Seattle
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #53 on: Fri, 10 February 2017, 14:00:58 »
Can we get a list of the founders edition winners? Also, where is the PCB from?

I will update the list tomorrow. But 50 orders have been placed.  :p
PCB made by my team. Made in China.  ;)
Is the PCB software going to be available prior?


Sent from my iPhone using Tapatalk

Yes, You can use BootMapperClient. Easy and friendly.

Will winkeyless.kr's pcb's also fit into this case?

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #54 on: Fri, 10 February 2017, 14:02:24 »
Hey there, I joined, a couple questions:

1.) Did I make it in the founders edition?
2.) I ordered 3 custom plates but I'm unsure of the font used - can I update somehow to get a font I would like?
3.) Do you accept first born children in exchange for the numpad XD

SO excited to be receiving this!  ;D

1) As i can see, YES! You made it.  :thumb:
2) Yea. You can update it later.
3) Yea. I think so.  :cool:

I am quite anxious to see the list. Plz tell me i made it in :-X
« Last Edit: Fri, 10 February 2017, 14:04:07 by CJD_Anthony »
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #55 on: Fri, 10 February 2017, 14:03:22 »
Can we get a list of the founders edition winners? Also, where is the PCB from?

I will update the list tomorrow. But 50 orders have been placed.  :p
PCB made by my team. Made in China.  ;)
Is the PCB software going to be available prior?


Sent from my iPhone using Tapatalk

Yes, You can use BootMapperClient. Easy and friendly.

Will winkeyless.kr's pcb's also fit into this case?

No. Our keyboard has middle USB port/hole. So we need to redraw another PCB.    :)

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #56 on: Fri, 10 February 2017, 14:03:56 »
Hey there, I joined, a couple questions:

1.) Did I make it in the founders edition?
2.) I ordered 3 custom plates but I'm unsure of the font used - can I update somehow to get a font I would like?
3.) Do you accept first born children in exchange for the numpad XD

SO excited to be receiving this!  ;D

1) As i can see, YES! You made it.  :thumb:
2) Yea. You can update it later.
3) Yea. I think so.  :cool:

I am quite anxious to see the list

I see you in the list.  :p

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #57 on: Fri, 10 February 2017, 14:05:36 »
Hey there, I joined, a couple questions:

1.) Did I make it in the founders edition?
2.) I ordered 3 custom plates but I'm unsure of the font used - can I update somehow to get a font I would like?
3.) Do you accept first born children in exchange for the numpad XD

SO excited to be receiving this!  ;D

1) As i can see, YES! You made it.  :thumb:
2) Yea. You can update it later.
3) Yea. I think so.  :cool:

I am quite anxious to see the list

I see you in the list.  :p

I made it into one of the 33?!
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline alveeno

  • Posts: 182
  • Location: Seattle
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #58 on: Fri, 10 February 2017, 14:07:31 »
Can you double check if I made the list? :)

On reddit you said "I think you made it in" which only makes me anxious :c

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #59 on: Fri, 10 February 2017, 14:12:59 »
Can you double check if I made the list? :)

On reddit you said "I think you made it in" which only makes me anxious :c

Hey there, I joined, a couple questions:

1.) Did I make it in the founders edition?
2.) I ordered 3 custom plates but I'm unsure of the font used - can I update somehow to get a font I would like?
3.) Do you accept first born children in exchange for the numpad XD

SO excited to be receiving this!  ;D

1) As i can see, YES! You made it.  :thumb:
2) Yea. You can update it later.
3) Yea. I think so.  :cool:

I am quite anxious to see the list

I see you in the list.  :p

I made it into one of the 33?!

All you guys made it!  :thumb:
I am very appreciated for your support.   :-*

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #60 on: Fri, 10 February 2017, 14:14:55 »
Am I on the list? :OO

Offline alveeno

  • Posts: 182
  • Location: Seattle
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #61 on: Fri, 10 February 2017, 14:19:43 »
Can you double check if I made the list? :)

On reddit you said "I think you made it in" which only makes me anxious :c

Hey there, I joined, a couple questions:

1.) Did I make it in the founders edition?
2.) I ordered 3 custom plates but I'm unsure of the font used - can I update somehow to get a font I would like?
3.) Do you accept first born children in exchange for the numpad XD

SO excited to be receiving this!  ;D

1) As i can see, YES! You made it.  :thumb:
2) Yea. You can update it later.
3) Yea. I think so.  :cool:

I am quite anxious to see the list

I see you in the list.  :p

I made it into one of the 33?!

All you guys made it!  :thumb:
I am very appreciated for your support.   :-*
yeeey:D
 thanks for responding to all these questions!

here's another question:
so founders editions will get an extra brass plate with custom text? will you be sending a form out for this later?

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #62 on: Fri, 10 February 2017, 14:21:59 »
Am I on the list? :OO

I think yes.  :p
This is the last time I answer about founders edition.  :p
I cannot reply to every single guy. Haha.
I will update the list tomm.

Can you double check if I made the list? :)

On reddit you said "I think you made it in" which only makes me anxious :c

Hey there, I joined, a couple questions:

1.) Did I make it in the founders edition?
2.) I ordered 3 custom plates but I'm unsure of the font used - can I update somehow to get a font I would like?
3.) Do you accept first born children in exchange for the numpad XD

SO excited to be receiving this!  ;D

1) As i can see, YES! You made it.  :thumb:
2) Yea. You can update it later.
3) Yea. I think so.  :cool:

I am quite anxious to see the list

I see you in the list.  :p

I made it into one of the 33?!

All you guys made it!  :thumb:
I am very appreciated for your support.   :-*
yeeey:D
 thanks for responding to all these questions!

here's another question:
so founders editions will get an extra brass plate with custom text? will you be sending a form out for this later?

Yea. I will have the instructions later.  :thumb:


Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #63 on: Fri, 10 February 2017, 14:23:06 »
H Y P E  :p

Offline alveeno

  • Posts: 182
  • Location: Seattle
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #64 on: Fri, 10 February 2017, 14:35:24 »
Sorry I'm bombarding you with questions :3.

Do you have pictures of the dark gray color? I chose it but would like to see a sample.

Offline Sneaky Potato

  • * Maker
  • Posts: 328
  • Location: Midworld
  • Gunslinger
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #65 on: Fri, 10 February 2017, 14:37:58 »
Very excited about this, hoping for a founders edition. I love the price! I also think the custom engraving is a really nice touch.

Offline alveeno

  • Posts: 182
  • Location: Seattle
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #66 on: Fri, 10 February 2017, 14:41:19 »
Very excited about this, hoping for a founders edition. I love the price! I also think the custom engraving is a really nice touch.

It's a super nice touch. Makes the board so much more customizable that it really does hold true the meaning of 'custom keyboard'

Offline JDragon

  • Posts: 469
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #67 on: Fri, 10 February 2017, 14:46:14 »
Dang I missed Founder's Edition...

Can we get more than three name plates? I want to have access to a bunch of different colors to pair with keysets.

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #68 on: Fri, 10 February 2017, 14:48:07 »
Very excited about this, hoping for a founders edition. I love the price! I also think the custom engraving is a really nice touch.

It's a super nice touch. Makes the board so much more customizable that it really does hold true the meaning of 'custom keyboard'

Very excited about this, hoping for a founders edition. I love the price! I also think the custom engraving is a really nice touch.

Thanks for your support!  :thumb:

Sorry I'm bombarding you with questions :3.

Do you have pictures of the dark gray color? I chose it but would like to see a sample.

Dark grey color is the prototype bro.  :p It's a finished keyboard.  :cool:

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #69 on: Fri, 10 February 2017, 14:49:35 »
Dang I missed Founder's Edition...

Can we get more than three name plates? I want to have access to a bunch of different colors to pair with keysets.

Yes. You can get many name plates. Just list out in the text box below.  :thumb:

Offline mmdango

  • Posts: 49
  • Location: California, US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #70 on: Fri, 10 February 2017, 15:05:13 »
I think I'm on the list... I must have submitted a few minutes after it opened... SO EXCITED YAY

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #71 on: Fri, 10 February 2017, 15:19:48 »
I think I'm on the list... I must have submitted a few minutes after it opened... SO EXCITED YAY

I submitted like 2 hours after i think you're good haha
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline JDragon

  • Posts: 469
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #72 on: Fri, 10 February 2017, 15:25:20 »
Dang I missed Founder's Edition...

Can we get more than three name plates? I want to have access to a bunch of different colors to pair with keysets.

Yes. You can get many name plates. Just list out in the text box below.  :thumb:

Thanks! Designed name plate means a name plate with "Exclusive E8-V1" on it?

Also, if we want to order two boards, should we submit two order forms?

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #73 on: Fri, 10 February 2017, 15:58:47 »
I think I'm on the list... I must have submitted a few minutes after it opened... SO EXCITED YAY

Yea, I submitted while I was waiting in line for my chicken sandwich. Just happened to check GH at the right time ;)

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #74 on: Fri, 10 February 2017, 16:08:04 »
Hey jhoang. Can you post the link to the google sheet of our responses for those of us that can't remember the options that we selected. Also, this might be an easy way for us to see who got one of the Founders editions.

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #75 on: Fri, 10 February 2017, 16:12:43 »
Hey jhoang. Can you post the link to the google sheet of our responses for those of us that can't remember the options that we selected. Also, this might be an easy way for us to see who got one of the Founders editions.

That may not be an easy thing to do, because people will be editing their selection over time, which changes the current order spreadsheet in real time, and sharing that full spreadsheet will not work (due to personal information contained), so a custom, separately-made spreadsheet will be easier to share once orders close and no more changes are made.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #76 on: Fri, 10 February 2017, 16:21:29 »
Hey jhoang. Can you post the link to the google sheet of our responses for those of us that can't remember the options that we selected. Also, this might be an easy way for us to see who got one of the Founders editions.

That may not be an easy thing to do, because people will be editing their selection over time, which changes the current order spreadsheet in real time, and sharing that full spreadsheet will not work (due to personal information contained), so a custom, separately-made spreadsheet will be easier to share once orders close and no more changes are made.

Fair enough. I'd just like to be able to see the options that I selected previously so that I know if I need to put in for an update. And Founders holders should be notified regardless.

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #77 on: Fri, 10 February 2017, 16:30:42 »
Probably easiest to post a summary spreadsheet right after orders close, which is what I plan on doing with the MIRA GB.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline ntitco1

  • Posts: 74
  • Location: Singapore
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #78 on: Fri, 10 February 2017, 16:43:48 »
Am I the only one who prefer a nice colored weight to a the brass founders edition?  :p

Offline alveeno

  • Posts: 182
  • Location: Seattle
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #79 on: Fri, 10 February 2017, 17:11:18 »
Am I the only one who prefer a nice colored weight to a the brass founders edition?  :p

I would like the colored weight too, but hey, it's a free brass plate naw? :P

Offline iArson

  • Posts: 434
  • Location: United States
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #80 on: Fri, 10 February 2017, 17:36:44 »
Since founders are getting the brass plate with custom engraving, are we able to buy another one? I'd love to purchase a colored aluminum one as well


Sent from my iPhone using Tapatalk

Offline chevovish

  • Posts: 8
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #81 on: Fri, 10 February 2017, 17:58:01 »
So sad that I did not make to it in the founder's edition, been following the ic for almost everyday.

Another question. If I want two boards, do I just place another order?

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #82 on: Fri, 10 February 2017, 18:21:43 »
Hey jhoang. Can you post the link to the google sheet of our responses for those of us that can't remember the options that we selected. Also, this might be an easy way for us to see who got one of the Founders editions.

Oh. Okay. I will sort the list soon. But you can submit another form with the note "Final form"  ;D

Am I the only one who prefer a nice colored weight to a the brass founders edition?  :p

Am I the only one who prefer a nice colored weight to a the brass founders edition?  :p

I would like the colored weight too, but hey, it's a free brass plate naw? :P

Haha. Founders edition can get extra aluminium weight.  :p

Since founders are getting the brass plate with custom engraving, are we able to buy another one? I'd love to purchase a colored aluminum one as well


Sent from my iPhohttps://geekhack.org/Smileys/solosmileys/sad.gifne using Tapatalk

Yea, i will add an option now. Dang. I just forgot to do it.  ;D

So sad that I did not make to it in the founder's edition, been following the ic for almost everyday.

Another question. If I want two boards, do I just place another order?

Yea. You can submit another form with the note "My second board", something like that.  :thumb:

Offline wholypantalones

  • Posts: 878
  • Location: The Mitten
  • text and icon mods plz.
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #83 on: Fri, 10 February 2017, 18:22:48 »
Is switch top removal an option on the plates?

Offline chevovish

  • Posts: 8
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #84 on: Fri, 10 February 2017, 18:27:32 »
Are zealios 78g and transparent gold plated stabs available for assemble and switch tuning?

Offline mmdango

  • Posts: 49
  • Location: California, US
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #85 on: Fri, 10 February 2017, 18:28:04 »
Saw this in the Google form:
Quote
Non-detachable cable (coiled cable FOR FEE)

Was that supposed to be FOR FREE...? Or is it for a fee  :-X

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #86 on: Fri, 10 February 2017, 18:28:56 »
Is switch top removal an option on the plates?

You mean the engraving name plate?

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #87 on: Fri, 10 February 2017, 18:29:59 »
Are zealios 78g and transparent gold plated stabs available for assemble and switch tuning?

Yes, you can choose those options for your board.  :thumb:

Saw this in the Google form:
Quote
Non-detachable cable (coiled cable FOR FEE)

Was that supposed to be FOR FREE...? Or is it for a fee  :-X

My typo! Haha. It's for free. LOL.

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #88 on: Fri, 10 February 2017, 18:50:19 »
Is there going to be a list with all the options for the assemble service?

Offline Yayification

  • Posts: 8
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #89 on: Fri, 10 February 2017, 18:58:47 »
Do you have a cost estimate on how much it would cost for Zealios 67g+transparent gold plated stabs on top of the $90 assembly? Also what revision are the Zealios?

Offline JDragon

  • Posts: 469
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #90 on: Fri, 10 February 2017, 18:59:53 »
Does "designed" name plate mean a name plate like the prototype has with "Exclusive E8-V1" engraved on it?

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #91 on: Fri, 10 February 2017, 19:00:52 »
Is there going to be a list with all the options for the assemble service?

Yes, I will do it later. For you, you just enter your options on switches and stabilizer.
We will consider your options and PM you later.

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #92 on: Fri, 10 February 2017, 19:05:17 »
Do you have a cost estimate on how much it would cost for Zealios 67g+transparent gold plated stabs on top of the $90 assembly? Also what revision are the Zealios?

Zealios switches are quite expensive. There are three options on Zealios 62g, 65g, 67g and 78g. The price is not exactly now. But no more than $130  :p

Does "designed" name plate mean a name plate like the prototype has with "Exclusive E8-V1" engraved on it?

Yes, that's it

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #93 on: Fri, 10 February 2017, 19:06:23 »
Is there going to be a list with all the options for the assemble service?

Yes, I will do it later. For you, you just enter your options on switches and stabilizer.
We will consider your options and PM you later.
Thanks for the quick reply! Is it possible to order a set of stabilizers with the board, I already got the switches. That would be very convenient. :)

Offline JDragon

  • Posts: 469
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #94 on: Fri, 10 February 2017, 19:07:22 »
Does "designed" name plate mean a name plate like the prototype has with "Exclusive E8-V1" engraved on it?

Yes, that's it

Thanks! The logo looks good, I gotta get a bunch of those. :D

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #95 on: Fri, 10 February 2017, 19:10:21 »
Is there going to be a list with all the options for the assemble service?

Yes, I will do it later. For you, you just enter your options on switches and stabilizer.
We will consider your options and PM you later.
Thanks for the quick reply! Is it possible to order a set of stabilizers with the board, I already got the switches. That would be very convenient. :)

Yes. You can place an order by PM me later.  :thumb:

Does "designed" name plate mean a name plate like the prototype has with "Exclusive E8-V1" engraved on it?

Yes, that's it

Thanks! The logo looks good, I gotta get a bunch of those. :D

 :p

Offline Dystopia

  • Posts: 48
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #96 on: Fri, 10 February 2017, 19:38:20 »
Damn, I want this so bad but I'm already broke  :(. Maybe I should order a nameplate and buy one off mechmarket in future

Offline JDragon

  • Posts: 469
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #97 on: Fri, 10 February 2017, 19:41:58 »
One more question - when will the dark blue color sample be up? I am hoping for a "midnight" or navy blue color.

Offline jhoang

  • Thread Starter
  • Posts: 167
  • Location: Somewhere over the rainbow
  • Matrix Lover
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #98 on: Fri, 10 February 2017, 19:52:05 »
One more question - when will the dark blue color sample be up? I am hoping for a "midnight" or navy blue color.

It should be like this: http://imgur.com/m9LawXE  :thumb:

Damn, I want this so bad but I'm already broke  :(. Maybe I should order a nameplate and buy one off mechmarket in future

Haha. It's a nice solution.   :thumb: Maybe I will give you an engraving name plate for free.  :p

Offline Faux

  • Posts: 111
Re: [GB] E8-V1 Custom TKL - TAKING ORDERS
« Reply #99 on: Fri, 10 February 2017, 19:53:32 »
Is there a way to edit my form? I decided I basically want to change most of the options I selected. I'd rather not have my submission deleted as that would mean I would lose my potential spot for the founder's edition. Do you have a reddit handle I can contact, as I am not too familiar with GH. Thanks!