Author Topic: [Preorder] TX1800v2 [Finished]  (Read 242291 times)

0 Members and 1 Guest are viewing this topic.

Offline futurecrime

  • Posts: 1001
  • Location: London, England
  • Get Zooted
Re: [Preorder] TX1800v2
« Reply #250 on: Thu, 29 June 2017, 09:27:08 »
General answer regarding email issues: Something is wrong with my email on the backend and I'm working on it. In the meantime, I've activated everyone and you should be log in just fine.

Regarding the GB: Stay put. If you paid for your order, you'll be on the list of orders to be sent out. As of now, there's no changes regarding the shipping estimate.

____q is correct as of now. Kin said he wanted to take care of orders that did go through first before getting on to the extra list and decided what to do.

I ordered mine on April 23rd so should be in R2. But I haven't paid for it as I've been waiting for an updated invoice with some changes I made. Kin said it would be fine to wait to see the R1 keyboards before finalising R2 options (basically deciding between red and blue) and not to worry about paying yet as long as it's paid for before it's posted. I've messaged him on Telegram with no response (I understand he's dealing with a lot of logistics, etc at the moment so no worries) but seeing this info has me a little worried. Can you confirm that my order still stands? I have an unpaid invoice in my Paypal from my initial order which I'm happy to pay now, and then settle the difference when the changes are added, if that helps?

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #251 on: Thu, 29 June 2017, 11:19:01 »
General answer regarding email issues: Something is wrong with my email on the backend and I'm working on it. In the meantime, I've activated everyone and you should be log in just fine.

Regarding the GB: Stay put. If you paid for your order, you'll be on the list of orders to be sent out. As of now, there's no changes regarding the shipping estimate.

____q is correct as of now. Kin said he wanted to take care of orders that did go through first before getting on to the extra list and decided what to do.

I ordered mine on April 23rd so should be in R2. But I haven't paid for it as I've been waiting for an updated invoice with some changes I made. Kin said it would be fine to wait to see the R1 keyboards before finalising R2 options (basically deciding between red and blue) and not to worry about paying yet as long as it's paid for before it's posted. I've messaged him on Telegram with no response (I understand he's dealing with a lot of logistics, etc at the moment so no worries) but seeing this info has me a little worried. Can you confirm that my order still stands? I have an unpaid invoice in my Paypal from my initial order which I'm happy to pay now, and then settle the difference when the changes are added, if that helps?

If he said so then you're fine. My reply mainly directed to people who got in the GB AFTER Kin's Paypal account was frozen.



To everyone who submitted the tickets, I'm working with Kin to confirm your changes and will reply to you on there.
==============
https://mekibo.com/

Offline futurecrime

  • Posts: 1001
  • Location: London, England
  • Get Zooted
Re: [Preorder] TX1800v2
« Reply #252 on: Thu, 29 June 2017, 11:32:24 »

If he said so then you're fine. My reply mainly directed to people who got in the GB AFTER Kin's Paypal account was frozen.


Cheers!  :thumb:

Offline Petch

  • Posts: 536
  • Location: UK
Re: [Preorder] TX1800v2
« Reply #253 on: Thu, 29 June 2017, 15:14:49 »
Will I still be receiving an order confirmation before shipment?

I had 2 different keyboards and I'd changed my order for each one of them a couple of times before hand (via Telegraph) and I'd just like to get a final confirmation

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #254 on: Thu, 29 June 2017, 16:36:04 »
Will I still be receiving an order confirmation before shipment?

I had 2 different keyboards and I'd changed my order for each one of them a couple of times before hand (via Telegraph) and I'd just like to get a final confirmation

If kin has responded to you via any apps then you're fine.

The website is to clump all the people together in their own ticket for better support/tracking. However, since Kin is super busy w test season, the site won't help much at the mean time. It will be better for the next sale.
==============
https://mekibo.com/

Offline boo

  • Posts: 249
Re: [Preorder] TX1800v2
« Reply #255 on: Thu, 29 June 2017, 21:05:27 »
Hi popkorn

Please ignore ticket #TV17729874

Instead use ticket #MH70317204

Sorry about the confusion. I goofed.

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #256 on: Fri, 30 June 2017, 00:40:04 »
Hi popkorn

Please ignore ticket #TV17729874

Instead use ticket #MH70317204

Sorry about the confusion. I goofed.

No worries. I got it  :thumb:
==============
https://mekibo.com/

Offline duynguyenle

  • Posts: 1388
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [Preorder] TX1800v2
« Reply #257 on: Fri, 30 June 2017, 05:47:53 »
I would like to add an extra plate and pcb to my order, (I believe I ordered early enough to be in Round 1)

I have texted Kin on telegram a while ago but have not gotten a reply. Is this still possible?
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #258 on: Fri, 30 June 2017, 12:24:59 »
I would like to add an extra plate and pcb to my order, (I believe I ordered early enough to be in Round 1)

I have texted Kin on telegram a while ago but have not gotten a reply. Is this still possible?

Please submit a support ticket.
==============
https://mekibo.com/

Offline megaforce

  • Posts: 1087
Re: [Preorder] TX1800v2
« Reply #259 on: Fri, 30 June 2017, 12:37:12 »
For films and springs, should be wait until the GB is over to fill out a ticket?

Usually Kin would take order on Telegram, but I'm sure our boy is buried in message right now.
Corsair K63 Wireless | Razer Huntsman Elite
More
Hokusai | Ogre| Yohane | Mc65 | Kaze | RBB
Former: LZ MX | LZ FE | LZ CLS TKL Silver |LZ CLS TKL Gray| LZ St | V.EA | Blackbird | LSV3 | OctagonV2 | Norbatouch | X60 | TX84 | Kyuu | SSK | 268.1| Jane CE | Corsair K95 | X60R | HHKB JP x JS HiPro | 910 CE |Nunu |Nunu FE | Jane V2 CE|Jane V2| RS (TKL)


Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #260 on: Fri, 30 June 2017, 16:17:41 »
For films and springs, should be wait until the GB is over to fill out a ticket?

Usually Kin would take order on Telegram, but I'm sure our boy is buried in message right now.

This. And also it's exam season in Korea.
==============
https://mekibo.com/

Offline barcode

  • Posts: 13
  • Location: Chicago
Re: [Preorder] TX1800v2
« Reply #261 on: Sat, 01 July 2017, 00:06:31 »
is it possible to still get in on this gb or will i need to wait for round three?

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #262 on: Sat, 01 July 2017, 02:40:45 »
is it possible to still get in on this gb or will i need to wait for round three?
Most likely there'll be extras
==============
https://mekibo.com/

Offline BOK

  • Posts: 52
  • Location: changwon, korea
  • i,m fine
Re: [Preorder] TX1800v2
« Reply #263 on: Sat, 01 July 2017, 16:45:54 »
tx1800V2_SKIDATA(ANSI)
« Last Edit: Wed, 05 July 2017, 04:38:37 by BOK »

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [Preorder] TX1800v2
« Reply #264 on: Sat, 01 July 2017, 17:05:53 »
tx1800V2_SKIDATA(ANSI)

Man, that's nice. I really want to get one of these, but also money.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline alienman82

  • * Elevated Elder
  • Posts: 4051
Re: [Preorder] TX1800v2
« Reply #265 on: Sat, 01 July 2017, 19:19:38 »
removed.
« Last Edit: Thu, 01 March 2018, 11:49:43 by alienman82 »

Offline kidcongo

  • Posts: 36
Re: [Preorder] TX1800v2
« Reply #266 on: Sun, 02 July 2017, 01:53:30 »
tx1800V2_SKIDATA(ANSI)

Very, very nice man, any pictures of the bottom?

Blue with the brass is what I ordered, well thought I'd ordered.. :'(

Offline renzpwns

  • Posts: 185
  • Location: USA
  • I didn't like money in my wallet anyways.
Re: [Preorder] TX1800v2
« Reply #267 on: Sun, 02 July 2017, 03:20:01 »
tx1800V2_SKIDATA(ANSI)
Wow, here I thought brass plates only worked when paired with black cases. Also, Skidata+ is definitely lookin ace in that blue case.

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [Preorder] TX1800v2
« Reply #268 on: Sun, 02 July 2017, 08:30:42 »
tx1800V2_SKIDATA(ANSI)

Dude- that blue is HOT!!! Great looking board, congrats.

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [Preorder] TX1800v2
« Reply #269 on: Sun, 02 July 2017, 08:38:22 »
Waiting for invoice

Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.

Missed all these responses while traveling- appreciate the updates, Kin... you're the man!!

So looking forward to more of these boards in the wild. I sent a message about shipping- would appreciate you hanging on and not sending mine out until after July 17. Thanks!!

edit: posts from June. I'm an idiot ---> blames the jetlag  :confused:
« Last Edit: Sun, 02 July 2017, 08:52:45 by smittysteve »

Offline duynguyenle

  • Posts: 1388
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [Preorder] TX1800v2
« Reply #270 on: Sun, 02 July 2017, 19:57:55 »
Waiting for invoice

Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.

Missed all these responses while traveling- appreciate the updates, Kin... you're the man!!

So looking forward to more of these boards in the wild. I sent a message about shipping- would appreciate you hanging on and not sending mine out until after July 17. Thanks!!

edit: posts from June. I'm an idiot ---> blames the jetlag  :confused:

Actually from May so  :confused:
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [Preorder] TX1800v2
« Reply #271 on: Sun, 02 July 2017, 20:01:17 »
Waiting for invoice

Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.

Missed all these responses while traveling- appreciate the updates, Kin... you're the man!!

So looking forward to more of these boards in the wild. I sent a message about shipping- would appreciate you hanging on and not sending mine out until after July 17. Thanks!!

edit: posts from June. I'm an idiot ---> blames the jetlag  :confused:

Actually from May so  :confused:

Sorry. My bad. Went a page back. Maybe four. Got excited to see Kin responses. Think Popcorn's latest is the word to roll with.

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #272 on: Tue, 04 July 2017, 00:41:13 »
I know some tickets are still open pls be patient while I'm working on it with kin. He's very very
==============
https://mekibo.com/

Offline duynguyenle

  • Posts: 1388
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [Preorder] TX1800v2
« Reply #273 on: Tue, 04 July 2017, 07:12:33 »
I know some tickets are still open pls be patient while I'm working on it with kin. He's very very

It seems you are also very very

Too very very to finish the sentence  :p

All joking aside, I'm getting hyped up, got switches and stabilisers all ready! Looks like I'm too poor this month to buy extra plates and PCBs, so I haven't submitted any tickets left. Hopefully there are enough extra PCBs down the line
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [Preorder] TX1800v2
« Reply #274 on: Tue, 04 July 2017, 08:11:58 »


I know some tickets are still open pls be patient while I'm working on it with kin. He's very very

It seems you are also very very

Too very very to finish the sentence 




Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #275 on: Tue, 04 July 2017, 14:08:47 »
My bad! I meant VERY BUSY .
==============
https://mekibo.com/

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [Preorder] TX1800v2
« Reply #276 on: Tue, 04 July 2017, 17:32:04 »
Will TX-CP R2 be shipped at the same time as these or after them? The suspense is killing me  :-\

Offline q1w2e3r4t5z

  • Posts: 213
  • Location: Good ol' Germany
Re: [Preorder] TX1800v2
« Reply #277 on: Thu, 06 July 2017, 05:56:05 »
Any word on shipping yet? It's supposed to ship out today and we were told we're getting an email confirming the color choices beforehand

Offline krispy

  • Posts: 60
Re: [Preorder] TX1800v2
« Reply #278 on: Thu, 06 July 2017, 08:34:43 »
I am also curious about shipping and if TX-CP R2 will ship at the same time?

Offline Mr_BeastQuake

  • Posts: 639
    • Reddit
Re: [Preorder] TX1800v2
« Reply #279 on: Thu, 06 July 2017, 15:00:00 »
Any chance dropping out of my R1 TX1800 spot is a possibility at this point?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [Preorder] TX1800v2
« Reply #280 on: Thu, 06 July 2017, 15:23:16 »
Any chance dropping out of my R1 TX1800 spot is a possibility at this point?

Given the speed of kin's communication, you'll have better luck flipping your board when it shows up.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline kimbles

  • Posts: 29
Re: [Preorder] TX1800v2
« Reply #281 on: Thu, 06 July 2017, 15:55:29 »
Any chance dropping out of my R1 TX1800 spot is a possibility at this point?

What color kit did ya get?  :-X
Visit the Typing Test and try!

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #282 on: Thu, 06 July 2017, 16:02:35 »
I gotta be honest that I cannot get a hold of Kin at this point. However, I do know that he was very very busy this past Monday (so Tuesday Korea time). All the tickets submitted also go to him so I'm sure when he got a moment he will take care of it.
==============
https://mekibo.com/

Offline Mr_BeastQuake

  • Posts: 639
    • Reddit
Re: [Preorder] TX1800v2
« Reply #283 on: Thu, 06 July 2017, 16:35:21 »
Any chance dropping out of my R1 TX1800 spot is a possibility at this point?

Given the speed of kin's communication, you'll have better luck flipping your board when it shows up.

Aye, but if I didn't ask and I could've done it then I would've been sad.

Offline avid

  • Posts: 775
Re: [Preorder] TX1800v2
« Reply #284 on: Thu, 06 July 2017, 16:39:29 »
Specs beastquake?

Offline Mr_BeastQuake

  • Posts: 639
    • Reddit
Re: [Preorder] TX1800v2
« Reply #285 on: Thu, 06 July 2017, 16:43:00 »
Specs beastquake?

Not looking to pre-sell something that, quite frankly, I have no idea when it is going to show up. If it comes to me then that's one thing but really just looking to get out. Though, as previously stated that is unlikely.

Offline avid

  • Posts: 775
Re: [Preorder] TX1800v2
« Reply #286 on: Thu, 06 July 2017, 16:45:00 »
In most GBs transfering spots is usually possible which i thought u wanted to do (possible through a fee), but is the assumtion here its not possible (since kin seems hard to get hold of)

Offline Mr_BeastQuake

  • Posts: 639
    • Reddit
Re: [Preorder] TX1800v2
« Reply #287 on: Thu, 06 July 2017, 16:47:02 »
In most GBs transfering spots is usually possible which i thought u wanted to do (possible through a fee), but is the assumtion here its not possible (since kin seems hard to get hold of)

The communication necessary to cancel one invoice and simultaneously send another, while not a lot, doesn't seem likely right now. As popkorn said, kin is busy, I get that so not really complaining just being real about the situation.

Offline q1w2e3r4t5z

  • Posts: 213
  • Location: Good ol' Germany
Re: [Preorder] TX1800v2
« Reply #288 on: Fri, 07 July 2017, 04:14:21 »
I'm gonna be honest: My gut says that it won't show up. I paid the invoice on 4/21 so I will at least wait until 10/20 'cause it's the last day where a complaint via PayPal is possible; if it shows up before I'm more than happy but as said I've a bad feeling given the poor communication and the constant delays. There's a lot of money in play and IIRC Kin has once been forbidden to sell stuff here at GH due to the things listed

Offline Petch

  • Posts: 536
  • Location: UK
Re: [Preorder] TX1800v2
« Reply #289 on: Fri, 07 July 2017, 04:26:18 »
I'm gonna be honest: My gut says that it won't show up. I paid the invoice on 4/21 so I will at least wait until 10/20 'cause it's the last day where a complaint via PayPal is possible; if it shows up before I'm more than happy but as said I've a bad feeling given the poor communication and the constant delays. There's a lot of money in play and IIRC Kin has once been forbidden to sell stuff here at GH due to the things listed
I'm pretty sure they've started turning up in Korea

Offline q1w2e3r4t5z

  • Posts: 213
  • Location: Good ol' Germany
Re: [Preorder] TX1800v2
« Reply #290 on: Fri, 07 July 2017, 04:53:50 »
I'm gonna be honest: My gut says that it won't show up. I paid the invoice on 4/21 so I will at least wait until 10/20 'cause it's the last day where a complaint via PayPal is possible; if it shows up before I'm more than happy but as said I've a bad feeling given the poor communication and the constant delays. There's a lot of money in play and IIRC Kin has once been forbidden to sell stuff here at GH due to the things listed
I'm pretty sure they've started turning up in Korea
As said I'll wait, that's not the issue... I was merely expressing my thoughts and no, I do not think we have another Ivan amongst us :)

Offline Mr_BeastQuake

  • Posts: 639
    • Reddit
Re: [Preorder] TX1800v2
« Reply #291 on: Fri, 07 July 2017, 08:25:42 »
I'm gonna be honest: My gut says that it won't show up. I paid the invoice on 4/21 so I will at least wait until 10/20 'cause it's the last day where a complaint via PayPal is possible; if it shows up before I'm more than happy but as said I've a bad feeling given the poor communication and the constant delays. There's a lot of money in play and IIRC Kin has once been forbidden to sell stuff here at GH due to the things listed

I'd be confident you'll get it. The boards exist and don't seem to suffer from quality issues as indicated by the KR boards. When you'll get it is probably unknown. I try and remember Kin is probably trying to package 200 or so (200 TXCP boards not included?) boards for shipping at what is apparently a busy time for him. Not an excuse for not dropping off a one lined update every once in awhile but that thought helps alleviate some frustration for me.

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #292 on: Fri, 07 July 2017, 10:13:57 »
Newest update: Shipments were delayed by the factory. New shipping date will be announced soon. Apologies for any inconvenience and please submit support tickets if you'd like to change anything to your orders. Shipping should not be more than 4 weeks from now.
==============
https://mekibo.com/

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [Preorder] TX1800v2
« Reply #293 on: Fri, 07 July 2017, 10:25:04 »
Newest update: Shipments were delayed by the factory. New shipping date will be announced soon. Apologies for any inconvenience and please submit support tickets if you'd like to change anything to your orders. Shipping should not be more than 4 weeks from now.

Hey Popcorn. Thanks for the update.

Do you think there's a chance we could just see an order spreadsheet? I think we'd all like to check and see what will be coming our way. I'm not bothered by the delay, but do want to make sure the correct items are sent once it's all shipped. Seems a spreadsheet would be easier than everyone opening tickets and dealing with it all one-by-one.

Offline Petch

  • Posts: 536
  • Location: UK
Re: [Preorder] TX1800v2
« Reply #294 on: Fri, 07 July 2017, 10:34:02 »
Yep, I'd like to double-check my order as well and Kin is inactive on telegraph

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [Preorder] TX1800v2
« Reply #295 on: Fri, 07 July 2017, 10:45:59 »
Yep, I'd like to double-check my order as well and Kin is inactive on telegraph

Exactly. We were spoiled in previous TX buys because you could just chat with Kin, see pics, etc., then it all showed up at your door. I get he's busy too- MrBeastQuake has the right attitude there and I'm with you on that. However, with him MIA on here and Telegram it would be really nice to see a spreadsheet.

Still total confidence in awesome boards being delivered, just need an uptick in communication here as we near the end so we aren't trying to fix things after the fact and send back/ forth to Korea.

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #296 on: Fri, 07 July 2017, 11:06:09 »
Hi guys,

I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.
==============
https://mekibo.com/

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [Preorder] TX1800v2
« Reply #297 on: Fri, 07 July 2017, 11:11:57 »
Hi guys,

I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.

Ok, so what do you recommend- anyone wanting to check order should open support ticket?

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Preorder] TX1800v2
« Reply #298 on: Fri, 07 July 2017, 11:27:54 »
Hi guys,

I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.

Ok, so what do you recommend- anyone wanting to check order should open support ticket?

For now yeah but if you haven't changed anything it should be in your Paypal's transaction comment no?
==============
https://mekibo.com/

Offline Uleoja

  • Posts: 55
Re: [Preorder] TX1800v2
« Reply #299 on: Fri, 07 July 2017, 16:00:17 »
Hi guys,

I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.

What factory is having the delays?