Thanks will make changes and see..
quick question does that mean i have to change the keymap array sequence?
Update 09/19/2015
for future reference or for any newb that stumbles on this if you don't want to resolder you can make your keymap_common.h look something like this....
KEYMAP( \
K01, K02, K03, \
K10, K11, K12, K13, \
K20, K21, K22, K23, K24, \
K30, K31, K32, K33, K34, \
K40, K41, K42, K43, K44, \
K50, K51, K52, K53, K54, \
K60, K61, K62, K63, K64, \
K70, K71, K72, K73, K74, \
K80, K81, K82, K83, K84, \
K90, K91, K92, K93, K94, \
KA0, KA1, KA2, KA3, KA4, \
KB0, KB1, KB2, KB3, KB4, \
KC0, KC1, KC2, KC3, \
KD1, KD2, KD3 ){ \
{ KC_NO, KC_##K01, KC_##K02, KC_##K03, KC_NO }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_NO }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24 }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34 }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44 }, \
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54 }, \
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64 }, \
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74 }, \
{ KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84 }, \
{ KC_##K90, KC_##K91, KC_##K92, KC_##K93, KC_##K94 }, \
{ KC_##KA0, KC_##K31, KC_##K32, KC_##K33, KC_##K34 }, \
{ KC_##KB0, KC_##K31, KC_##K32, KC_##K33, KC_##K34 }, \
{ KC_##KC0, KC_##K31, KC_##K32, KC_##K33, KC_NO }, \
{ KC_NO, KC_##K31, KC_##K32, KC_##K33, KC_NO } \
and change your keymap_poker.c to look something like this
KEYMAP(
INS, QUOT, RCTL, \
0, SCLN, O, SLSH, \
9, Y, I, DOT, FN1, \
8, U, E, COMM, RSFT, \
7, L, N, M, RALT, \
6, J, H, K, ENT, \
EQL, END, TAB, RGUI, BSPC, \
MINS, HOME, ESC, LGUI, DELETE, \
5, G, D, B, SPC, \
4, P, T, V, LALT, \
3, F, S, C, LSFT, \
2, W, R, X, FN1, \
1, Q, A, Z, \
CAPS, BSLS, LCTL),
......and so on....
Update:
I made the above changes and got some output as opposed to before with no output.
Though at this time, there's a lot of gibberish and the left hand still doesn't work.
Update 9/08:
All of the left side works well now (there was a bad switch), 3 out of 5 keys in the right half print something but they print a mirror of what's in the left side, the journey continues.
Update 09/19:
seems my choice of cables and choice of connectors between my left and right halves were making it difficult for the (left) non teensy side) to not get the signal. will have to ghetto-ize the prototype for it to work.
Thanks and appreciations to all who helped.