Author Topic: [GB] TMO50 keyboard - COMPLETE (Read 90210 times)

nocilantroplz · « **Reply #400 on:** Mon, 25 February 2019, 15:11:21 »

Quote from: funderburker on Mon, 25 February 2019, 14:31:25

Quote from: nocilantroplz on Mon, 25 February 2019, 13:43:12
Here we go! The cable is a cheap one I found so I could cut it to fit into the socket...

Yeah, unfortunately a fatter cable can have this issue. But that's one thick cable connector you got there!

Nice to see Dvorak on a TMO50, actually first time seeing one. Haven't tried dvorak but does TMO50 layout suit it well?

Yeah

that's the only cable I could cut since it's rubber...

and Yes!! Dvorak works great on this one

I'm still getting used to typing numbers and symbols with space pressed but otherwise it's great. Love my keyboard <3

ideus · « **Reply #401 on:** Mon, 25 February 2019, 16:25:41 »

Quote from: funderburker on Mon, 25 February 2019, 13:17:27

Quote from: ideus on Mon, 25 February 2019, 12:45:14
Someone may share a picture comparing sizes with a sixty? I am under the impression that the TM050 is even wider than a sixty.

It is. By .25u.

Show Image

Alright. thank you very much for taking the time to put them together in KLE.

Starius · « **Reply #402 on:** Thu, 28 February 2019, 18:22:44 »

Weeeeeeeee this is going to be fun!

Starius · « **Reply #403 on:** Thu, 28 February 2019, 19:42:05 »

Quote from: cucgach on Sat, 09 February 2019, 19:49:19

I flash the lastest hex from github and the led indicators work like charm. Thanks funderbunker and everyone for your support.

Quick video shot by phone to demonstrate.

Out of curiosity, what LEDs did you use there? (And where is a good source for them? )

cucgach · « **Reply #404 on:** Fri, 01 March 2019, 07:55:36 »

They're 234 leds. I got bunch of them via local electric store. I'm sure you can find them on amazon or ship from taobao/aliexpress from China with very cheap price (but longer the shipping time)

Lormania · « **Reply #405 on:** Sat, 02 March 2019, 16:20:32 »

Hope there is another round this year. I have one, but just want another one haha

William_S_Jones · « **Reply #406 on:** Sat, 02 March 2019, 17:09:20 »

Quote from: Lormania on Sat, 02 March 2019, 16:20:32

Hope there is another round this year. I have one, but just want another one haha

Nice, didn't get a round one, so I'm most definitely looking forward to round two!

Sent from my iPhone using Tapatalk

Minterly · « **Reply #407 on:** Sun, 03 March 2019, 19:58:41 »

Quote from: William_S_Jones on Sat, 02 March 2019, 17:09:20

Quote from: Lormania on Sat, 02 March 2019, 16:20:32
Hope there is another round this year. I have one, but just want another one haha
Nice, didn't get a round one, so I'm most definitely looking forward to round two!

Sent from my iPhone using Tapatalk

Is there gonna be R2? I'm so so so down I always seem to find these GBs too late.

rycirese · « **Reply #408 on:** Tue, 05 March 2019, 13:01:51 »

Super depressed I missed out on this, looks amazing. Would kill for a R2 of this as it's probably close to endgame for me.

funderburker · « **Reply #409 on:** Sun, 10 March 2019, 09:17:03 »

Hi,

a small update. Some people have asked me for tmo50's plate files and I wanted to share them sooner but didn't have the time. I made two of them - one for regular stagger (1.25u/1.75 middle row) and one for offset stagger (1.5u/1.5u middle row). You can find both in the TMO50 repo.

Xynerorias · « **Reply #410 on:** Sun, 10 March 2019, 10:25:48 »

Quote from: rycirese on Tue, 05 March 2019, 13:01:51

Super depressed I missed out on this, looks amazing. Would kill for a R2 of this as it's probably close to endgame for me.

Same, I really want a r2 but I don't think that'll happen anytime soon. In the meantime, let's just hope someone sell it on mm

ctrl · « **Reply #411 on:** Sun, 10 March 2019, 14:41:19 »

Quote from: funderburker on Sun, 10 March 2019, 09:17:03

Hi,

a small update. Some people have asked me for tmo50's plate files and I wanted to share them sooner but didn't have the time. I made two of them - one for regular stagger (1.25u/1.75 middle row) and one for offset stagger (1.5u/1.5u middle row). You can find both in the TMO50 repo.

Big thanks for sharing this!

cucgach · « **Reply #412 on:** Sun, 10 March 2019, 21:45:59 »

Quote from: funderburker on Sun, 10 March 2019, 09:17:03

Hi,

a small update. Some people have asked me for tmo50's plate files and I wanted to share them sooner but didn't have the time. I made two of them - one for regular stagger (1.25u/1.75 middle row) and one for offset stagger (1.5u/1.5u middle row). You can find both in the TMO50 repo.

fantastic! I can make use of my spare pcb sometimes later

Thanks for sharing.

William_S_Jones · « **Reply #413 on:** Sun, 10 March 2019, 21:49:58 »

Quote from: cucgach on Sun, 10 March 2019, 21:45:59

Quote from: funderburker on Sun, 10 March 2019, 09:17:03
Hi,

a small update. Some people have asked me for tmo50's plate files and I wanted to share them sooner but didn't have the time. I made two of them - one for regular stagger (1.25u/1.75 middle row) and one for offset stagger (1.5u/1.5u middle row). You can find both in the TMO50 repo.

fantastic! I can make use of my spare pcb sometimes later Thanks for sharing.

I'm interested in your (or someone else's) exrra PCB if you ever want to sell it to me.

Sent from my iPhone using Tapatalk

apossardt · « **Reply #414 on:** Sun, 10 March 2019, 23:23:21 »

Finally got around to building mine after the daunting task of finding SA Oblivion as well

Sent from my Pixel 2 XL using Tapatalk

hndle · « **Reply #415 on:** Mon, 11 March 2019, 03:54:00 »

Quote from: funderburker on Sun, 10 March 2019, 09:17:03

Hi,

a small update. Some people have asked me for tmo50's plate files and I wanted to share them sooner but didn't have the time. I made two of them - one for regular stagger (1.25u/1.75 middle row) and one for offset stagger (1.5u/1.5u middle row). You can find both in the TMO50 repo.

thnak u funderburker!!
but unfortunately I don't have any extra pcb

funderburker · « **Reply #416 on:** Mon, 11 March 2019, 06:33:34 »

Quote from: Xynerorias on Sun, 10 March 2019, 10:25:48

Quote from: rycirese on Tue, 05 March 2019, 13:01:51
Super depressed I missed out on this, looks amazing. Would kill for a R2 of this as it's probably close to endgame for me.

Same, I really want a r2 but I don't think that'll happen anytime soon. In the meantime, let's just hope someone sell it on mm

I'm sorry that I don't have a timeline for R2 but it's just not a priority for me right now as I have a lot on my plate unfortunately. I value your comments though and am eager to run R2 once I'm ready. Seeing the greatly positive response from the community is really motivating.

Quote from: ctrl on Sun, 10 March 2019, 14:41:19

Big thanks for sharing this!

Quote from: apossardt on Sun, 10 March 2019, 23:23:21

Finally got around to building mine after the daunting task of finding SA Oblivion as well
Show Image

Looks great! Not a fan of SA but Oblivion is a keyset theme that looks great on any profile.

Quote from: cucgach on Sun, 10 March 2019, 21:45:59

fantastic! I can make use of my spare pcb sometimes later :) Thanks for sharing.

Should've done it way way sooner, sorry.

Quote from: hndle on Mon, 11 March 2019, 03:54:00

thnak u funderburker!!
but unfortunately I don't have any extra pcb :'(

Unfortunately all of the extra PCBs have been sold so plate files are mostly for people that either have a TMO50 or have an extra PCB for now. Unless you go with a hand-wire.

Minterly · « **Reply #417 on:** Mon, 11 March 2019, 16:46:41 »

Quote from: funderburker on Mon, 11 March 2019, 06:33:34

Quote from: Xynerorias on Sun, 10 March 2019, 10:25:48
Quote from: rycirese on Tue, 05 March 2019, 13:01:51
Super depressed I missed out on this, looks amazing. Would kill for a R2 of this as it's probably close to endgame for me.

Same, I really want a r2 but I don't think that'll happen anytime soon. In the meantime, let's just hope someone sell it on mm

I'm sorry that I don't have a timeline for R2 but it's just not a priority for me right now as I have a lot on my plate unfortunately. I value your comments though and am eager to run R2 once I'm ready. Seeing the greatly positive response from the community is really motivating.

Hey if you need help running another GB I have no idea how to do it but I'm so down to help just to get my hands on this board hahaha

neojonathan · « **Reply #418 on:** Mon, 11 March 2019, 21:23:44 »

Built my TMO50 as well !!

-- TMO50 Rose Gold

-- Novelkeys Kailh Cream Lubed w/ KRYTOX GPL 205 GRADE 0

-- Cherry Screw-in Stabilizers

-- GMK Red Samurai Hirgana with Novelties

-- ETF Financial Instrument Artisan Set

Starius · « **Reply #419 on:** Mon, 11 March 2019, 21:29:49 »

Quote from: neojonathan on Mon, 11 March 2019, 21:23:44

Built my TMO50 as well !!

-- TMO50 Rose Gold

-- Novelkeys Kailh Cream Lubed w/ KRYTOX GPL 205 GRADE 0

-- Cherry Screw-in Stabilizers

-- GMK Red Samurai Hirgana with Novelties

-- ETF Financial Instrument Artisan Set

(Attachment Link)

Very cool! Well done!

funderburker · « **Reply #420 on:** Tue, 12 March 2019, 06:09:48 »

Quote from: neojonathan on Mon, 11 March 2019, 21:23:44

Built my TMO50 as well !!

-- TMO50 Rose Gold

-- Novelkeys Kailh Cream Lubed w/ KRYTOX GPL 205 GRADE 0

-- Cherry Screw-in Stabilizers

-- GMK Red Samurai Hirgana with Novelties

-- ETF Financial Instrument Artisan Set

(Attachment Link)

That's so hot. And I really like that artisan column, a great set!

Talljoe · « **Reply #421 on:** Thu, 14 March 2019, 12:31:15 »

I guess I can toss my build in here now, shown running SA Ocean Dolch but currently has SA Industrial (with matching cable).

Obe · « **Reply #422 on:** Sun, 17 March 2019, 01:13:26 »

I would be so interested in a round 2. Is it possible in 2019 or 2020?

odd · « **Reply #423 on:** Mon, 18 March 2019, 14:37:32 »

Are there any extra pcb's left? I busted one trying to make it hotswap

Aerizu · « **Reply #424 on:** Sun, 24 March 2019, 00:47:26 »

I hope I wasn't late to the party

63.5g Tealios V2, JTK Hana

More pics here: https://imgur.com/a/oIYTagy

LightningXI · « **Reply #425 on:** Sun, 24 March 2019, 00:48:50 »

That looks gorgeous! =)

ideus · « **Reply #426 on:** Sun, 24 March 2019, 19:19:25 »

Quote from: Aerizu on Sun, 24 March 2019, 00:47:26

I hope I wasn't late to the party
63.5g Tealios V2, JTK Hana

(Attachment Link)

More pics here: https://imgur.com/a/oIYTagy

Ya need authentic split space bar key caps. :O

funderburker · « **Reply #427 on:** Mon, 25 March 2019, 01:59:26 »

Quote from: Aerizu on Sun, 24 March 2019, 00:47:26

I hope I wasn't late to the party
63.5g Tealios V2, JTK Hana

(Attachment Link)

More pics here: https://imgur.com/a/oIYTagy

Damn, looking sooo cute!

roostrc0gburn · « **Reply #428 on:** Fri, 31 May 2019, 11:58:56 »

anyone have suggestions for a nice sleeve or carrying case for tmo50?

Lormania · « **Reply #429 on:** Fri, 31 May 2019, 12:08:49 »

Quote from: roostrc0gburn on Fri, 31 May 2019, 11:58:56

anyone have suggestions for a nice sleeve or carrying case for tmo50?

I just received a case from Modern Coup Cases via their custom ordering form to fit a TMO and it is really nice. Definitely recommend. Just keep in mind that it will take time for them to do the custom order.