Author Topic: [GB] LZ St (COMPLETED)  (Read 72515 times)

0 Members and 1 Guest are viewing this topic.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] LZ St : Open
« Reply #50 on: Sun, 07 May 2017, 20:30:52 »
I've read that newer cherry switches are generally pretty smooth, but it seems like hardly anyone has even used silent blacks yet so information is a bit scarce.

The only currently available keyboard using the new Silent Blacks are the RGB Pok3rs, currently selling at MassDrop.

Buy one and see how it compares to the older Blacks made years ago.  I put in an order for one Pok3r with Silent Blacks installed, just out of curiosity.

???

The new tooling was introduced with MX silents. Any board made after mid-late 2016 has the new switches. The first person to notice took the switches out of a Leopold.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline LifeZ

  • Thread Starter
  • Posts: 776
  • LifeZone
Re: [GB] LZ St : Open
« Reply #51 on: Sun, 07 May 2017, 21:15:27 »
Hi LZ, Is there support for Alps?

only cherry mx switch
« Last Edit: Sun, 07 May 2017, 21:42:03 by LifeZ »
LZ Limited

Offline LifeZ

  • Thread Starter
  • Posts: 776
  • LifeZone
Re: [GB] LZ St : Open
« Reply #52 on: Sun, 07 May 2017, 21:43:54 »
I'm not familiar with the "LEEKU L3 PCB", anyone know if it's Alps/Matias compatible (Or if there's another PCB that would be) ?
only cherry mx switch.
LZ Limited

Offline LifeZ

  • Thread Starter
  • Posts: 776
  • LifeZone
Re: [GB] LZ St : Open
« Reply #53 on: Sun, 07 May 2017, 21:49:16 »
I'm not familiar with the "LEEKU L3 PCB", anyone know if it's Alps/Matias compatible (Or if there's another PCB that would be) ?

Ask Skully if his PCB will fit in the case. Its compatible with the same layout https://clueboard.co/parts/clueboard-66-pcb-25

compatible with clueboard66 pcb
but uncompatible original 660m pcb
LZ Limited

Offline rasmusx

  • Posts: 59
  • Location: Estonia
Re: [GB] LZ St : Open
« Reply #54 on: Tue, 09 May 2017, 18:15:57 »
Any pics of rgb diffuser? Does pcb have underglow option?


Sent from my iPhone using Tapatalk

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Open
« Reply #55 on: Tue, 09 May 2017, 20:18:25 »
Better put in your orders before the 12th because it's coming up fast.

Word of note here, LZ never builds the same keyboard again.  He doesn't do re-runs and it's a group buy strictly for NEW designs only.

I remembered when he ran his first GB in Korea, never had the chance to get in on it but now he is here I will never again avoid any of his interesting keyboard designs.

Looking forward to paying for this and seeing it built in South Korea (home land of super quality, hand built keyboards)   8) .


Offline megaforce

  • Posts: 1087
Re: [GB] LZ St : Open
« Reply #57 on: Tue, 09 May 2017, 22:18:46 »
Can we have a spreadsheet with the orders? LZ can you please confirm my order?

From OP:

Order check 2017-05-13 ~ 05-17
Corsair K63 Wireless | Razer Huntsman Elite
More
Hokusai | Ogre| Yohane | Mc65 | Kaze | RBB
Former: LZ MX | LZ FE | LZ CLS TKL Silver |LZ CLS TKL Gray| LZ St | V.EA | Blackbird | LSV3 | OctagonV2 | Norbatouch | X60 | TX84 | Kyuu | SSK | 268.1| Jane CE | Corsair K95 | X60R | HHKB JP x JS HiPro | 910 CE |Nunu |Nunu FE | Jane V2 CE|Jane V2| RS (TKL)


Offline aaron6301

  • Posts: 509
  • Location: TX
  • Pixel Pusher
Re: [GB] LZ St : Open
« Reply #58 on: Tue, 09 May 2017, 23:22:40 »
Can we have a spreadsheet with the orders? LZ can you please confirm my order?

From OP:
Order check 2017-05-13 ~ 05-17

I asked for this via PM and LZ provided a link... Not sure if he wants me to share it as it isn't posted in the OP but to ease your nerves, both of your names are on the spreadsheet he provided.


Offline ihalatch

  • Posts: 762
  • Location: Adelaide, Australia
Re: [GB] LZ St : Open
« Reply #59 on: Tue, 09 May 2017, 23:24:18 »
Can we have a spreadsheet with the orders? LZ can you please confirm my order?

From OP:
Order check 2017-05-13 ~ 05-17

I asked for this via PM and LZ provided a link... Not sure if he wants me to share it as it isn't posted in the OP but to ease your nerves, both of your names are on the spreadsheet he provided.



Thanks mate, appreciate it.

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] LZ St : Open
« Reply #60 on: Wed, 10 May 2017, 00:01:34 »
Can we have a spreadsheet with the orders? LZ can you please confirm my order?

From OP:
Order check 2017-05-13 ~ 05-17

I asked for this via PM and LZ provided a link... Not sure if he wants me to share it as it isn't posted in the OP but to ease your nerves, both of your names are on the spreadsheet he provided.
Could you please check if my name is on there too?

I filled out the form before the GB thread got created and I'm kinda worried.

Thanks!

Offline poolside

  • Posts: 790
  • Location: On the deck
Re: [GB] LZ St : Open
« Reply #61 on: Wed, 10 May 2017, 05:54:19 »
Can we have a spreadsheet with the orders? LZ can you please confirm my order?

From OP:
Order check 2017-05-13 ~ 05-17

I asked for this via PM and LZ provided a link... Not sure if he wants me to share it as it isn't posted in the OP but to ease your nerves, both of your names are on the spreadsheet he provided.
Could you please check if my name is on there too?

I filled out the form before the GB thread got created and I'm kinda worried.

Thanks!

The OP has been updated with a link to the said spreadsheet. You're in!

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Open
« Reply #62 on: Wed, 10 May 2017, 06:41:51 »
The OP has been updated with a link to the said spreadsheet. You're in!

Filled out mine a day after he provided the order link to his Korean site, way before he set up this page here.

Just goes to show he monitors everything, nothing gets past him when it comes to accepting orders from us lot.  Also it looks like he'll be building this keyboard far quicker than usual.

Good news for those who can't wait with getting their hands onto his latest Masterpiece  :thumb: .

Offline rasmusx

  • Posts: 59
  • Location: Estonia
Re: [GB] LZ St : Open
« Reply #63 on: Wed, 10 May 2017, 07:24:56 »
Does anybody know how the 11 degrees angle is compared to Filco Majestouch2/FC660C with feet down/up? I am quite used to flat ones.

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] LZ St : Open
« Reply #64 on: Wed, 10 May 2017, 10:36:19 »
Can we have a spreadsheet with the orders? LZ can you please confirm my order?

From OP:
Order check 2017-05-13 ~ 05-17

I asked for this via PM and LZ provided a link... Not sure if he wants me to share it as it isn't posted in the OP but to ease your nerves, both of your names are on the spreadsheet he provided.
Could you please check if my name is on there too?

I filled out the form before the GB thread got created and I'm kinda worried.

Thanks!

The OP has been updated with a link to the said spreadsheet. You're in!
Thanks for the heads up! :)

Offline boo

  • Posts: 249
Re: [GB] LZ St : Open
« Reply #65 on: Wed, 10 May 2017, 14:48:12 »
Hi LZ, I placed an order last night. Can you confirm please? Thanks!


Sent from my iPhone using Tapatalk

Offline CMYK

  • Posts: 120
Re: [GB] LZ St : Open
« Reply #66 on: Wed, 10 May 2017, 15:33:43 »
Better put in your orders before the 12th because it's coming up fast.

Word of note here, LZ never builds the same keyboard again.  He doesn't do re-runs and it's a group buy strictly for NEW designs only.

I remembered when he ran his first GB in Korea, never had the chance to get in on it but now he is here I will never again avoid any of his interesting keyboard designs.

Looking forward to paying for this and seeing it built in South Korea (home land of super quality, hand built keyboards)   8) .

I was wondering if he would ever do a re run.  I really want a LZ-CP, but that was released before I was into the hobby.

Offline Cocopah

  • Posts: 268
  • Location: Socal
  • Lurker Extraordinaire
Re: [GB] LZ St : Open
« Reply #67 on: Wed, 10 May 2017, 17:56:16 »
Hi LZ, I placed an order last night. Can you confirm please? Thanks!


Sent from my iPhone using Tapatalk
Order check

Give it some time to update, He's on top of it.

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Open
« Reply #68 on: Wed, 10 May 2017, 18:32:49 »
I was wondering if he would ever do a re run.  I really want a LZ-CP, but that was released before I was into the hobby.

He may re-do it if there are lots of people demanding it but be aware, he always changes names on any future keyboard designs.

Besides I actually like his designs overall, they're very conservative, solid and built to his particular standard which is always way above all other manufacturers on this planet.

LZ is the King of Keyboards when it comes to solid built Aluminium all using any variety of CherryMX Switches  :thumb: .
« Last Edit: Wed, 10 May 2017, 21:35:44 by Elrick »

Offline rasmusx

  • Posts: 59
  • Location: Estonia
Re: [GB] LZ St : Open
« Reply #69 on: Thu, 11 May 2017, 03:36:58 »
Filled the form. It shall be my first custom board :cool:

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Open
« Reply #70 on: Thu, 11 May 2017, 05:24:02 »
Filled the form. It shall be my first custom board 8)

You certainly picked the right custom keyboard, in losing your data entry virginity too  :thumb: .

Be proud of that, you should of seen the grubby skank-keyboards I was forced to use before ever encountering a luscious LZ up close  ;) .

Offline poolside

  • Posts: 790
  • Location: On the deck
Re: [GB] LZ St : Open
« Reply #71 on: Sat, 13 May 2017, 09:22:10 »
A couple questions before the order check starts:
- Will the Leeku PCB have pre-soldered RGB underglow LEDs? I assume so as an optional diffuser is offered, but the order form does not mention RGB LEDs in the PCB's features.
- Will the brass weight be coated?

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] LZ St : Open
« Reply #72 on: Sat, 13 May 2017, 11:23:22 »
I can't decide if I want a silver case with STS or brass weight  :-\

Anybody got some pics?

Offline poolside

  • Posts: 790
  • Location: On the deck
Re: [GB] LZ St : Open
« Reply #73 on: Sat, 13 May 2017, 15:04:14 »
I can't decide if I want a silver case with STS or brass weight  :-\

Anybody got some pics?

I looked at these pictures of OTD weights this afternoon and decided that I like brass better on silver or grey boards than black ones:

- https://www.flickr.com/photos/63579387@N06/albums/72157659283669249
- https://geekhack.org/index.php?topic=78597.0
- https://www.flickr.com/photos/115722906@N08/15287131120/in/album-72157648098547719/
- http://imgur.com/a/PBpwZ

The LZ-St weight seems to be polished, though. The feeling could therefore be different.

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] LZ St : Open
« Reply #74 on: Sat, 13 May 2017, 18:36:08 »
I can't decide if I want a silver case with STS or brass weight  :-\

Anybody got some pics?

I looked at these pictures of OTD weights this afternoon and decided that I like brass better on silver or grey boards than black ones:

- https://www.flickr.com/photos/63579387@N06/albums/72157659283669249
- https://geekhack.org/index.php?topic=78597.0
- https://www.flickr.com/photos/115722906@N08/15287131120/in/album-72157648098547719/
- http://imgur.com/a/PBpwZ

The LZ-St weight seems to be polished, though. The feeling could therefore be different.
Thanks, but I still can't decide 😣

I think I'll just flip a coin or get both.

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Open
« Reply #75 on: Sun, 14 May 2017, 19:15:56 »
Looks like it's time to pay the Bill.

Looking forward to getting mine LZ, hence send it out to me as soon as possible, I want this purchase to go nice and fast  :thumb: .

Offline merintil

  • Posts: 37
Re: [GB] LZ St : Open
« Reply #76 on: Mon, 15 May 2017, 07:31:51 »
Have all of the invoices been sent out yet? I don't think I've received mine.

Offline futurecrime

  • Posts: 1001
  • Location: London, England
  • Get Zooted
Re: [GB] LZ St : Open
« Reply #77 on: Mon, 15 May 2017, 08:17:56 »
I haven't had mine and I'm 9th on the form. I think Elrick is asking for his invoice in his post, rather than saying he''s received it... maybe no-one has received it yet?

Offline Cocopah

  • Posts: 268
  • Location: Socal
  • Lurker Extraordinaire
Re: [GB] LZ St : Open
« Reply #78 on: Mon, 15 May 2017, 09:29:54 »
I haven't had mine and I'm 9th on the form. I think Elrick is asking for his invoice in his post, rather than saying he''s received it... maybe no-one has received it yet?
Ya I don't think they've gone out yet. I haven't received mine either.

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Open
« Reply #79 on: Mon, 15 May 2017, 18:40:58 »
I haven't had mine and I'm 9th on the form. I think Elrick is asking for his invoice in his post, rather than saying he''s received it... maybe no-one has received it yet?

Precisely, only going by LZ's own time table that he has set here.  You are a funny guy suggesting I want it sent via snail mail, sorry sunshine I maybe old but I do all my payments via paypal so no postal usage required other than email.

Haven't received anything as of yet but I really want this bill because once you've paid for it, then it's actually happening  8) .
« Last Edit: Mon, 15 May 2017, 18:43:58 by Elrick »

Offline megaforce

  • Posts: 1087
Re: [GB] LZ St : Open
« Reply #80 on: Mon, 15 May 2017, 20:54:44 »
Got my invoice shortly ago; I assume everyone will get theirs soon!
Corsair K63 Wireless | Razer Huntsman Elite
More
Hokusai | Ogre| Yohane | Mc65 | Kaze | RBB
Former: LZ MX | LZ FE | LZ CLS TKL Silver |LZ CLS TKL Gray| LZ St | V.EA | Blackbird | LSV3 | OctagonV2 | Norbatouch | X60 | TX84 | Kyuu | SSK | 268.1| Jane CE | Corsair K95 | X60R | HHKB JP x JS HiPro | 910 CE |Nunu |Nunu FE | Jane V2 CE|Jane V2| RS (TKL)


Offline futurecrime

  • Posts: 1001
  • Location: London, England
  • Get Zooted
Re: [GB] LZ St : Open
« Reply #81 on: Mon, 15 May 2017, 21:03:39 »
I haven't had mine and I'm 9th on the form. I think Elrick is asking for his invoice in his post, rather than saying he''s received it... maybe no-one has received it yet?

Precisely, only going by LZ's own time table that he has set here.  You are a funny guy suggesting I want it sent via snail mail, sorry sunshine I maybe old but I do all my payments via paypal so no postal usage required other than email.

Haven't received anything as of yet but I really want this bill because once you've paid for it, then it's actually happening  8) .

Yeah for sure, I wasn't saying you were asking for it to be delivered in the post, I was referring to your post, as in posts like what I'm doing right now. Posting. Anyway, I just got an email with an invoice but it's unclear if it's for this or the lightsaver. Need to figure out what I've spent...

EDIT: just saw megaforce post, guess it's for this then.
« Last Edit: Mon, 15 May 2017, 21:06:47 by futurecrime »

Offline boo

  • Posts: 249
Re: [GB] LZ St : Open
« Reply #82 on: Mon, 15 May 2017, 21:06:30 »
Got my invoice shortly ago; I assume everyone will get theirs soon!

I did too. I just want to confirm, I got an invoice from eu.....@nate.com. The description just said Geekhack st. LZ, Can you confirm this is from you?

Normally, I receive invoice from LZ with Lifezone in the email. Thanks!

edit: Paid
« Last Edit: Mon, 15 May 2017, 22:31:13 by boo »

Offline Mr_BeastQuake

  • Posts: 639
    • Reddit
Re: [GB] LZ St : Open
« Reply #83 on: Mon, 15 May 2017, 21:31:28 »
I also got an invoice from e******@nate.com. The subject was geekhack, St. a bit lacking in description but if LZ could confirm that is all I need.

Offline ihalatch

  • Posts: 762
  • Location: Adelaide, Australia
Re: [GB] LZ St : Open
« Reply #84 on: Mon, 15 May 2017, 21:33:47 »
I also got an invoice from e******@nate.com. The subject was geekhack, St. a bit lacking in description but if LZ could confirm that is all I need.

Same here. I sent him a message in order to confirm it.

Offline alienman82

  • * Elevated Elder
  • Posts: 4051
Re: [GB] LZ St : Open
« Reply #85 on: Mon, 15 May 2017, 21:41:25 »
removed.
« Last Edit: Thu, 01 March 2018, 12:55:56 by alienman82 »

Offline Cocopah

  • Posts: 268
  • Location: Socal
  • Lurker Extraordinaire
Re: [GB] LZ St : Open
« Reply #86 on: Mon, 15 May 2017, 21:45:26 »
I got my invoice shortly after I seen him come on line here. I'm sure its him, but it wouldn't hurt for confirmation though.

Offline LifeZ

  • Thread Starter
  • Posts: 776
  • LifeZone
Re: [GB] LZ St : Open
« Reply #87 on: Mon, 15 May 2017, 22:08:11 »
Yes. It's me
e******@nate.com
no worries. ;D


LZ Limited


Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Open
« Reply #89 on: Mon, 15 May 2017, 22:22:03 »
Paid. The waiting game begins. Thanks LZ.

 :'( :'( :'( :'(   Still waiting for mine.

Everyone handing over their money before me, just something not right here.

Maybe this is old man hatred where it's justified to put us old geezers towards the end of the line to wait for an eternity.  Considering we don't have that luxury anymore  :o .

Offline LifeZ

  • Thread Starter
  • Posts: 776
  • LifeZone
Re: [GB] LZ St : Invoice sent
« Reply #90 on: Mon, 15 May 2017, 23:24:17 »
Hey.
I assembly service support for GB.
But i have cherry mx brown, red, blue and black (But there are not many switches.)
So you can send me a switch to assemble.
If you send it to Korea, it will not exceed $10. (usps)

assembly service price.
https://goo.gl/WxEqbl
LZ Limited

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Invoice sent
« Reply #91 on: Tue, 16 May 2017, 02:41:05 »
 ;D ;D ;D :p :p :p 8) 8) 8)

Just paid for mine, looking forward to this baby being built and shipped to me here in Convict Town.

Finally a really decent small keyboard, built by a Master in Keyboards  :thumb: .

Offline futurecrime

  • Posts: 1001
  • Location: London, England
  • Get Zooted
Re: [GB] LZ St : Invoice sent
« Reply #92 on: Tue, 16 May 2017, 04:42:29 »
Paid up. Nice day for LZ bank account. Looking forward to having this hard, massive 65% under my hands. I wanna see those bezels.

Offline futurecrime

  • Posts: 1001
  • Location: London, England
  • Get Zooted
Re: [GB] LZ St : Invoice sent
« Reply #93 on: Tue, 16 May 2017, 05:28:46 »
LZ, out of interest, what's the total number of these you're making?

Offline merintil

  • Posts: 37
Re: [GB] LZ St : Invoice sent
« Reply #94 on: Tue, 16 May 2017, 08:25:03 »
Just paid the invoice, I hope I am not too late!

I'm still sort of new at all of this.

Offline aaron6301

  • Posts: 509
  • Location: TX
  • Pixel Pusher
Re: [GB] LZ St : Invoice sent
« Reply #95 on: Tue, 16 May 2017, 10:20:59 »
Paid. Thanks LZ  :thumb:

Offline rasmusx

  • Posts: 59
  • Location: Estonia
Re: [GB] LZ St : Invoice sent
« Reply #96 on: Tue, 16 May 2017, 11:22:03 »
Invoice paid.


Sent from my iPhone using Tapatalk

Offline alienman82

  • * Elevated Elder
  • Posts: 4051
Re: [GB] LZ St : Invoice sent
« Reply #97 on: Tue, 16 May 2017, 11:36:47 »
removed.
« Last Edit: Thu, 01 March 2018, 12:55:52 by alienman82 »

Offline Mr_BeastQuake

  • Posts: 639
    • Reddit
Re: [GB] LZ St : Invoice sent
« Reply #98 on: Tue, 16 May 2017, 11:40:06 »
Just out of curiosity caused by the assembly post, are the PCB's for the group buy pre-soldered with resistors, diodes, LED's?

Offline aaron6301

  • Posts: 509
  • Location: TX
  • Pixel Pusher
Re: [GB] LZ St : Invoice sent
« Reply #99 on: Tue, 16 May 2017, 11:41:26 »
Just out of curiosity caused by the assembly post, are the PCB's for the group buy pre-soldered with resistors, diodes, LED's?
The answers you're looking for are in the first post