geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: eniigma on Tue, 15 December 2020, 09:03:55

Title: [GB] Vertigo - Extras This Weekend!
Post by: eniigma on Tue, 15 December 2020, 09:03:55

Final Update

Hey everyone!

I’m pleased to announce the information for the Vertigo extras sale!

Standard Edition: We will be selling all units as marked B-stock. There’s a good mix of both A and B-stock (with the majority of boards being A-minus stock), but similar to what we did for Infinitum, we will randomize what boards people receive. All standard edition boards will be sold for $560 on our website. Good news for lovers of FCFS: extras will be sold this Saturday at 9AM EST on our website, using good old FCFS  ;)

Special Edition: We will be hosting a Vickrey auction for 7 SE units. These units will be A-stock, and the auction will run on Sunday, August 1st from 9AM to 9PM EST, and you can submit your bid at anytime within that window. The starting bid will be $850.

Please let us know if you have any questions regarding anything! Thank you!

Hey everyone!

Welcome to the group buy for Vertigo, our latest project!

(https://i.imgur.com/61oRmMm.jpg)

Vertigo is a seamless, screwless, gasket-mounted 65% with symmetrical bottom row blockers.

(https://i.imgur.com/1bAaxJW.jpg)

There will be two editions offered for this board, the standard edition and a special edition.

(https://i.imgur.com/fRFCuFz.jpg)

The layouts offered are as shown (please note that only ANSI plates will be offered at GB, with ISO plate files being available on our website).

(https://i.imgur.com/cQGavmO.png)

Standard Edition Features:
   -Byzantine Purple or Charcoal Grey aluminum shell piece (see renders for more info on colors)
   -E-white aluminum base piece
   -E-white aluminum full plate
   -Custom ek65 PCB (QMK/VIA compatible) with daughterboard
   -Custom hard carrying case
   -Custom injection-molded rubber bumpons
   -Price: $540

Special Edition Features
   -E-white aluminum shell piece
   -Brass PVD Rose Gold Base
   -Aluminum full plate
   -Custom ek65 PCB (QMK/VIA compatible) with daughterboard
   -Custom hard carrying case
   -Custom injection-molded rubber bumpons
   -Price: $845

Group Buy Information:
Group buy will happen through our custom developed raffle system (http://eniigmakeyboards.com/raffles)!
Please note you need to be a member of our Discord server (http://eniigmakeyboards.com/discord) to participate in this raffle.
There are 120 units of standard edition, and 15 units of special edition available to the public.
The raffle for special edition is open Wednesday, 12/16 from 9AM to 9PM EST.
The raffle for standard edition is open Saturday, 12/19 from 9AM to 9PM EST.
Invoices will be sent within 24 hours of the raffle closing.
Orders will be shipped late summer 2021.

Smooth Curves

(https://i.imgur.com/LCmPAE4.jpg)

Vertigo features smooth curves all around. All four of its sides are sculpted upwards, giving it a thin upper bezel, but also leaving enough room on the inside for its complex internals.
The back piece of Vertigo is an elegant curve that loops around the sides of the board, in a singular flush motion. 

(https://i.imgur.com/Q3jC9ce.jpg)

Screwless Bottom

(https://i.imgur.com/vCr7uJb.jpg)

From a designers’ perspective, the screwless bottom on Vertigo is arguably the most exciting part of this board. The PCB and plate are designed to allow for the screws to slot in through the plate.
The screw itself is split resting between the two different halves of the cases, which not only allows an even weight distribution, but makes this whole system possible by not interfering with the switches.

(https://i.imgur.com/nHW6zFC.jpg)

Please join our Discord server (https://eniigmakeyboards.com/discord) for the quickest updates, and to further discuss this board. Note that you will need to join the Discord server to be eligible for the sale!

(https://i.imgur.com/lbSVjpu.jpg)
(https://i.imgur.com/5bpYKfz.jpg)
(https://i.imgur.com/XvMx7o1.jpg)

Lulzthax  (https://www.twitch.tv/lulzthax_)will be building the Vertigo prototype this Wednesday at 6:30PM PST!

To see the full prototype album, click this link (https://imgur.com/a/jGozvYx).

(https://i.imgur.com/GzqSMRP.jpg)

Title: Re: [GB] Vertigo - Special Edition Raffle Wednesday!
Post by: eniigma on Tue, 15 December 2020, 09:04:05
Reserved for updates
Title: Re: [GB] Vertigo - Special Edition Raffle Wednesday!
Post by: Xanira on Tue, 15 December 2020, 10:29:40
Yes please <3
Title: Re: [GB] Vertigo - Special Edition Raffle Wednesday!
Post by: dRnRcRr on Tue, 15 December 2020, 11:53:42
It's beautiful
Title: Re: [GB] Vertigo - Special Edition Raffle Wednesday!
Post by: Fisher on Wed, 16 December 2020, 07:53:36
good!
Title: Re: [GB] Vertigo - Special Edition Raffle Wednesday!
Post by: ZongZiWang on Wed, 16 December 2020, 11:58:27
Hope to win the raffle once
Title: Re: [GB] Vertigo - Standard Edition Raffle Saturday!
Post by: eniigma on Wed, 16 December 2020, 20:47:24
Special edition raffle closed, invoices going out tomorrow morning! Will update this thread again once invoices are out!
Title: Re: [GB] Vertigo - Standard Edition Raffle Saturday!
Post by: DYKEN on Wed, 16 December 2020, 21:10:43
it's cool ,I LOVE IT
Title: Re: [GB] Vertigo - Standard Edition Raffle Saturday!
Post by: eniigma on Fri, 18 December 2020, 22:50:21
Sorry for the delayed update - special edition invoices are all out.

The standard edition raffle opens tomorrow, hope to see you all there! Same entry time, from 9AM to 9PM EST! Good luck  :p
Title: Re: [GB] Vertigo - Standard Edition Raffle Saturday!
Post by: spikedsynapse on Sun, 20 December 2020, 11:16:46
wow is this board made from Mythril? why is it so expensive?
Title: Re: [GB] Vertigo - Raffles Complete
Post by: eniigma on Mon, 21 December 2020, 15:06:14
All invoices for the standard edition are now out! Thank you all for participating!
Title: Re: [GB] Vertigo - Standard Edition Raffle Saturday!
Post by: treeleaf64 on Mon, 21 December 2020, 17:07:31
wow is this board made from Mythril? why is it so expensive?

Custom injection-molded rubber bumpons
Title: Re: [GB] Vertigo - Standard Edition Raffle Saturday!
Post by: littlesmall on Wed, 23 December 2020, 09:12:06
How much about that?
Title: Re: [GB] Vertigo - Standard Edition Raffle Saturday!
Post by: FoxFire007 on Wed, 30 December 2020, 03:31:51
Any slots open up, would love to know

Sent from my SM-G988U using Tapatalk

Title: Re: [GB] Vertigo - Production Imminent!
Post by: eniigma on Thu, 07 January 2021, 09:48:42
Hi all, want to provide a small update - we've gathered all of our final orders, and are placing orders now! Thank you all for helping us fill all of the slots.

We will be providing updates here and on our Discord server (http://eniigmakeyboards.com/discord). The next update will be on Saturday, 1/23, and updates will be biweekly following that day.
Title: Re: [GB] Vertigo - Production Imminent!
Post by: Invezting on Tue, 19 January 2021, 01:17:19
Good guy eniigma <3
Title: Re: [GB] Vertigo - Production Imminent!
Post by: eniigma on Mon, 25 January 2021, 09:14:27
Update 1/25

Hey everyone! Time for the first official update!

All manufacturer invoices have been paid as of last night, and materials will be ordered ASAP! We expect machining to begin after the Chinese New Year. We are still on track for a summer delivery date!

Also! For all special edition buyers, we will be changing the silkscreened logo to an enamel infill, for increased durability! See the image for an example.

(https://i.imgur.com/h7tmC06.png.)

Thanks, everyone!
Title: Re: [GB] Vertigo - Production Imminent!
Post by: eniigma on Sat, 06 February 2021, 21:09:29
Update 2/6

Time for another update! Final fixtures are being finished up, and we are still expecting for machining to begin after Chinese New Year. We are still running as scheduled!

See you all in two weeks, and stay safe!
Title: Re: [GB] Vertigo - Production Underway!
Post by: eniigma on Sun, 21 February 2021, 15:20:53
Update 2/21

Hi everyone, sorry for the delayed update. The CNY holiday just ended at our factory, and machining should be underway this week! Thanks everyone!

Title: Re: [GB] Vertigo - Production Underway!
Post by: eniigma on Sat, 06 March 2021, 21:33:32
Update 3/6

First update of the month! Machining is now well underway! The factory is making good progress, and at this rate, we can ideally wrap up machining by the end of the month. Cheers!
Title: Re: [GB] Vertigo - Production Underway!
Post by: eniigma on Sun, 21 March 2021, 15:52:46
Update 3/21

Machining is coming along nicely, and we expect it to have completed by the next update! Until then!  ;)
Title: Re: [GB] Vertigo - Production Underway!
Post by: eniigma on Sat, 03 April 2021, 09:08:08
Update 4/3

Machining is now complete! The machined parts are currently being polished to get rid of any erroneous machining marks, and they will be prepped for anodizing! We will be having a couple of anodizing samples made for us to approve before sending the entire batch of boards in, and we'll update you guys once we make that decision!

Take care everyone!  :thumb:
Title: Re: [GB] Vertigo - Production Underway!
Post by: eniigma on Sun, 18 April 2021, 14:47:39
Update 4/18

Time for another update!

We haven't cleared all of the anodizing samples just yet, but we expect those to be ready this week. We had some preliminary pictures of the samples posted in our Discord server (https://eniigmakeyboards.com/discord/) so if you're interested, take a look. We'll likely have entered the anodizing stage by the next update!

Quick update for SE buyers - e-white tops have been coated, and brass pieces are being prepared for the PVD coating!

Thanks everyone!
Title: Re: [GB] Vertigo - Anodizing!
Post by: eniigma on Sun, 02 May 2021, 11:02:38
Update 5/2

Quick update! Boards are slowly wrapping up anodizing, and we expect that to be fully complete by the next update! This was slightly delayed due to us going through a few rounds of color matching and tuning the grain of the anode, but everything is now approved. We're still on track for our original delivery estimate.

For SE buyers - brass pieces are now in PVD!

Thanks everyone!
Title: Re: [GB] Vertigo - Machining Complete, Anodizing Soon!
Post by: eniigma on Sun, 16 May 2021, 11:00:44
Update 5/16

All finishing is now complete  :D

QC is underway, and hopefully by the time of our next update, we'll have received production samples and have approved the shipment. Thanks!
Title: Re: [GB] Vertigo - QC Underway!
Post by: eniigma on Sat, 29 May 2021, 21:53:25
Update 5/29

We just passed 5 months for this buy, and we’re happy to report that all boards are now complete!

We’ve hired an independent agency to do an extra round of quality control for us before the shipment is sent out, and production samples have also been shipped to us to verify.

Once that’s done, the shipment will be on it’s way, and we expect movement on that by the next update.

Thank you everyone!  :thumb:
Title: Re: [GB] Vertigo - QC Complete!
Post by: eniigma on Mon, 14 June 2021, 10:56:40
Update 6/14


It’s that time! Apologies for the delayed update this week, but it’s a good one!

Boards have shipped from our manufacturer to our shipping partners, and they have informed us that they will receive it today or tomorrow.

The Yianten port in Shenzhen is currently facing delays due to another outbreak of the virus there, which has a ripple effect in air freight pricing and timelines. Air freight usually takes around 10-14 working days, but with these delays, we expect boards to arrive in around a months time.

Please start emailing us your address change requests, by replying to your order confirmation! Let us know if you have any more questions, and enjoy the rest of your week. Thanks!
Title: Re: [GB] Vertigo - QC Complete!
Post by: eniigma on Sat, 26 June 2021, 16:46:20
Update 6/26

Update time!

Unfortunately, Shenzhen is still being plagued by the same COVID issues, and is currently under lockdown. As you've likely seen, this shutdown is impacting everything, from manufacturing to logistics. We are currently looking into alternate options for shipping, one such option being moving the shipment to another province of China and shipping it via sea shipping, as air freight is extremely limited at the moment.

We will keep you guys updated regarding the movement of these boards! Hopefully we are able to stick to our initial estimate of a late summer delivery date. Thank you all!
Title: Re: [GB] Vertigo - Shipping Delays
Post by: eniigma on Sat, 10 July 2021, 11:03:57
Update 7/10

We managed to book a spot on a plane, and we're expecting things to start arriving in the next couple weeks! This is your last call to make an address change, as it's possible that by the next update, shipping will have begun!

A smidge of bad news however - when shipping boxes finished production a few months ago, we figured we had enough time to ship them by sea (as it's nearly 150kg). While the ship docked a couple weeks ago, and everything has cleared customs, due to port backlog, the boxes haven't been taken off the ship yet. We are crossing our fingers that they get here in time so we don't have to delay shipment any longer, but it is out of our control.

Thank you all! It's been a long journey and it's good to finally wrap it up!
Title: Re: [GB] Vertigo - Extras Announcement This Week!
Post by: eniigma on Sun, 25 July 2021, 19:09:18
Update 7/25

Hi everyone! It's time for the final GB update. All group buy orders have been shipped out (the last few boards will be collected on Monday, but are all packed up). We hope you all enjoy your boards, and shoot us an email at support@eniigmakeyboards.com if you have any issues with your order.

We ordered a significant number of extras for Vertigo, and we'll be announcing a date in the upcoming days. Keep an eye on our Instagram (http://instagram.com/eniigmakeyboards) and Discord server (https://eniigmakeyboards.com/discord) to get more info about that.

Thank you all for a (relatively) smooth group buy!
Title: Re: [GB] Vertigo - Extras Announcement This Week!
Post by: eniigma on Tue, 27 July 2021, 21:18:39
Final Update

Hey everyone!

I’m pleased to announce the information for the Vertigo extras sale!

Standard Edition: We will be selling all units as marked B-stock. There’s a good mix of both A and B-stock (with the majority of boards being A-minus stock), but similar to what we did for Infinitum, we will randomize what boards people receive. All standard edition boards will be sold for $560 on our website. Good news for lovers of FCFS: extras will be sold this Saturday at 9AM EST on our website, using good old FCFS  ;)

Special Edition: We will be hosting a Vickrey auction for 7 SE units. These units will be A-stock, and the auction will run on Sunday, August 1st from 9AM to 9PM EST, and you can submit your bid at anytime within that window. The starting bid will be $850.

Please let us know if you have any questions regarding anything! Thank you!
Title: Re: [GB] Vertigo - Extras This Weekend!
Post by: SDKCAMPING on Tue, 27 July 2021, 23:50:03
off topic: Why is it an $850 starting price, when chances are it will get bids above $850 anyway?
Title: Re: [GB] Vertigo - Extras This Weekend!
Post by: Xanira on Wed, 28 July 2021, 07:58:27
off topic: Why is it an $850 starting price, when chances are it will get bids above $850 anyway?
The original cost during gb was 845 so it makes sense.
Title: Re: [GB] Vertigo - Extras This Weekend!
Post by: Yehuo. on Mon, 09 August 2021, 22:32:09
Just to explain my personal opinion to prevent everyone in the community from stepping on landmines. This is a brand new vertigo obtained from eniigma's GB, just opened for inspection. The picture shows that the surface coating of E-white is peeling off, one of which is 1cm (this is the surface of the bottom, not the inside, if it is inside, I think it’s okay). But when I contacted for after-sales processing, eniigma told me that this was within the scope of A-stock's standard. If you want to replace the rest of the bottom, there are such defects, but it is within the standard. He said that there is no need for this. Circumstances within the scope of the standard cause unnecessary replacement costs. Maybe there is something wrong with my understanding of A-stock, but this is a bad GB experience.
https://www.reddit.com/r/MechanicalKeyboards/comments/p24cf7/according_to_eniigmaboards_this_is_a_600_astock/
Title: Re: [GB] Vertigo - Extras This Weekend!
Post by: eniigma on Thu, 26 August 2021, 20:39:22
Hey everyone,

We felt that it was necessary to say something about all the issues that have arisen during the Vertigo group buy. We let you down, and we're sorry, and we're going to be spending some time fixing things before we try doing it again.

We've put out a full statement, so please feel free to read it if you're interested in what we're doing to improve things here at Eniigma Keyboards going forward.
https://docs.google.com/document/d/1zZUQSfRq16Ty7I5cmVxR69J0L8qjBUp-Hv7MGFj7I2s/view