oh, how thick will the polycarbonate plate be?
Alps support?if so, seperate plate pls
Alps support?if so, seperate plate pls
Definitely getting in on this, love the layout.Please no. I can't afford another brass keyboard right now, haha.
My wishlist would be:
- Full brass board option
- Fixed layout ANSI plate option
- QMK PCB w/ USB C
Can we see pictures of the bottom? Will there be prototypes?
All in
Looks great! Will the green be the same as E6V2?Same
Also love the layout!Support
My wishlist:
- ISO Support
- ISO Support
- and finally... ISO Support
:thumb: :pAlso love the layout!Support
My wishlist:
- ISO Support
- ISO Support
- and finally... ISO Support
I digs the nametagI digS the LED indicator ;D
Please have a separate plate for ISO. When you have them on the same plate there's a lot more space for the switches to wiggle around, and they don't really look nice.+1
+1Please have a separate plate for ISO. When you have them on the same plate there's a lot more space for the switches to wiggle around, and they don't really look nice.+1
at which price point are we roughly sitting?
You should have 3 plates available. ANSI universal, ISO universal, and the "definitive edition" single layout plate with the most popular layout; for those of us who want a solid no Swiss cheese plate.I wish i can but reality is strict
You should have 3 plates available. ANSI universal, ISO universal, and the "definitive edition" single layout plate with the most popular layout; for those of us who want a solid no Swiss cheese plate.I wish i can but reality is strict
You should have 3 plates available. ANSI universal, ISO universal, and the "definitive edition" single layout plate with the most popular layout; for those of us who want a solid no Swiss cheese plate.I wish i can but reality is strict
I know it would be difficult but is there any possibility of a WKL top?Sry will not have blockers .but it support WKL bottom row which i have updated layout pic
I love!! :-*
I know it would be difficult but is there any possibility of a WKL top?Sry will not have blockers .but it support WKL bottom row which i have updated layout pic
No 1u next to ISO enter as well.I know it would be difficult but is there any possibility of a WKL top?Sry will not have blockers .but it support WKL bottom row which i have updated layout pic
no split left shift?
Prototype will come next week .
after that i will make 5 colors for the prototype . :thumb:
Prototype will come next week .
after that i will make 5 colors for the prototype . :thumb:
Sounds great.
Will the prototypes be ready for all 5 colors before the GB launches?
(I'm having a hard time deciding the color ;D )
I've seen them, but they're renders so I thought it would be better to actually see them in photographs.Prototype will come next week .
after that i will make 5 colors for the prototype . :thumb:
Sounds great.
Will the prototypes be ready for all 5 colors before the GB launches?
(I'm having a hard time deciding the color ;D )
if you click the link to the leds and name tag i think all the colors are shown there?
hey guys ,let us move on itIt's too early to be so sexy...
Dark purple sample :Show Image(https://i.imgur.com/RdUUMtt.jpg)Show Image(https://i.imgur.com/M25aVi7.jpg)
More pictures :https://imgur.com/a/a7XZDTQ (https://imgur.com/a/a7XZDTQ)
It will do on E7 also. :thumb:
hey guys ,let us move on itIt's too early to be so sexy...
Dark purple sample :Show Image(https://i.imgur.com/RdUUMtt.jpg)Show Image(https://i.imgur.com/M25aVi7.jpg)
More pictures :https://imgur.com/a/a7XZDTQ (https://imgur.com/a/a7XZDTQ)
It will do on E7 also. :thumb:
Looking really good!hey guys ,let us move on itIt's too early to be so sexy...
Dark purple sample :Show Image(https://i.imgur.com/RdUUMtt.jpg)Show Image(https://i.imgur.com/M25aVi7.jpg)
More pictures :https://imgur.com/a/a7XZDTQ (https://imgur.com/a/a7XZDTQ)
It will do on E7 also. :thumb:
Yea .Prototype will done on this Friday.
Did we ever get a confirmation about USB-C and QMK support?
any estimated price yet?I'd estimate between E6 and E8 prices ;) but we'll know for sure on monday
nicelooks like this won't have it maybe... there's still an ISO enter in the layout pic, but no split left shift...
ISO support pls
nice
ISO support pls
ah yeah right, then the layout image must be a bit older maybe... and the fact that ISO support is crossed out in the specs is misleading too ;)nice
ISO support pls
He already said that it's going to have ISO support.
ah yeah right, then the layout image must be a bit older maybe... and the fact that ISO support is crossed out in the specs is misleading too ;)nice
ISO support pls
He already said that it's going to have ISO support.
yeah, ISO enter, but no key to the left of ISO Enter and no split left shiftah yeah right, then the layout image must be a bit older maybe... and the fact that ISO support is crossed out in the specs is misleading too ;)niceHe already said that it's going to have ISO support.
ISO support pls
Pretty sure the layout image shows ISO support...
Already support last time just updated the picture.:https://i.imgur.com/QOHdVWh.png (https://i.imgur.com/QOHdVWh.png)yeah, ISO enter, but no key to the left of ISO Enter and no split left shiftah yeah right, then the layout image must be a bit older maybe... and the fact that ISO support is crossed out in the specs is misleading too ;)niceHe already said that it's going to have ISO support.
ISO support pls
Pretty sure the layout image shows ISO support...
Already support last time just updated the picture.:https://i.imgur.com/flcDPVh.png (https://i.imgur.com/flcDPVh.png)Nice! This is perfect :)
Already support last time just updated the picture.:https://i.imgur.com/flcDPVh.png (https://i.imgur.com/flcDPVh.png)
Nope, it's a new picture.Already support last time just updated the picture.:https://i.imgur.com/flcDPVh.png (https://i.imgur.com/flcDPVh.png)
Was there a previous picture of the layout that had split backspace? Or was I confused by the Del and Page keys?
Already support last time just updated the picture.:https://i.imgur.com/flcDPVh.png (https://i.imgur.com/flcDPVh.png)
Was there a previous picture of the layout that had split backspace? Or was I confused by the Del and Page keys?
Awesome! Looking forward to it.Already support last time just updated the picture.:https://i.imgur.com/flcDPVh.png (https://i.imgur.com/flcDPVh.png)
Was there a previous picture of the layout that had split backspace? Or was I confused by the Del and Page keys?
Ah i have make a mistake .just fix it .
ps :prototype will done in Monday . :thumb:
Alps support?if so, seperate plate pls
agreed
Sorry guys GB need delay few daysPrototype delayed?
Yea ,so GB also delayedSorry guys GB need delay few daysPrototype delayed?
Sorry guys GB need delay few days
SureSorry guys GB need delay few days
With the GB start delayed 5 days, could we get a 5 day extension on completion as well? That would be great.
Mr. Exclusive,Hi sir .
Will the dark green be the same as the E6 green? I am trying to avoid ordering the same color and the color samples here look much darker.
Perfect. Thanks for the info. Will look out for the proto pics. Excited for this one.Mr. Exclusive,Hi sir .
Will the dark green be the same as the E6 green? I am trying to avoid ordering the same color and the color samples here look much darker.
the green same as the e6 it may have a little different. wait the prototype
What is that LED indicator pattern? 75E? 35L?75E... 35L makes no sense ;)
Oh I guess 75E could be 75% Exclusive, didn't think of that.:thumb:
Oh dang I thought it was 35L too and had no idea what it meant. 75E makes so much more sense. If the alignment was vertical like:
7
5
E
Then the ambiguity would go away. Not sure which alignment (left horizontal/current, right horizontal, or vertical) would look best though.
i have already sort the ic form .
here is the result :Show Image(https://i.imgur.com/cIdl0dZ.png)
LED version hit the high percentage,so this time we will do LED version
(nameplate version maybe next time )Show Image(https://i.imgur.com/FYnFNtB.png)
So GB will chose those color : MAO -
Gray - dark blue -dark purple -black (dark green )
i have already sort the ic form .
here is the result :Show Image(https://i.imgur.com/cIdl0dZ.png)
LED version hit the high percentage,so this time we will do LED version
(nameplate version maybe next time )Show Image(https://i.imgur.com/FYnFNtB.png)
So GB will chose those color : MAO -
Gray - dark blue -dark purple -black (dark green )
Mao is a slight off-white (mao = micro arc oxidation, aka peo = plasma electrolytic oxidation)i have already sort the ic form .
here is the result :Show Image(https://i.imgur.com/cIdl0dZ.png)
LED version hit the high percentage,so this time we will do LED version
(nameplate version maybe next time )Show Image(https://i.imgur.com/FYnFNtB.png)
So GB will chose those color : MAO -
Gray - dark blue -dark purple -black (dark green )
Awesome!
I too, would like to see color examples. Also, what color is MAO?
I would argue is grey. Not really an off white. Here is a pic of my MAO Canoe with SA valentine. Alphas are white and mods are grey. https://i.imgur.com/X4m1XIw.jpgMao is a slight off-white (mao = micro arc oxidation, aka peo = plasma electrolytic oxidation)i have already sort the ic form .
here is the result :Show Image(https://i.imgur.com/cIdl0dZ.png)
LED version hit the high percentage,so this time we will do LED version
(nameplate version maybe next time )Show Image(https://i.imgur.com/FYnFNtB.png)
So GB will chose those color : MAO -
Gray - dark blue -dark purple -black (dark green )
Awesome!
I too, would like to see color examples. Also, what color is MAO?
Sent from my DREA100 using Tapatalk
No rushBoth actually
I will post prototype pic and color sample before gb start
By the way you guys like Mao because is white color or it just the treatment
Will dark green be an option? I hope so. Looks great!
Will dark green be an option? I hope so. Looks great!It would be .i just get the sample and already anodized it
I will update GB info soon on 27thGreat! Been looking forward to this for a while. :thumb:
price ,color ,version,
Okay ,let`s start it .I will update GB info soon on 27thGreat! Been looking forward to this for a while. :thumb:
price ,color ,version,
:yespls:, no sign of proto yet?Okay ,let`s start it .I will update GB info soon on 27thGreat! Been looking forward to this for a while. :thumb:
price ,color ,version,
Working on it now . :thumb::yespls:, no sign of proto yet?Okay ,let`s start it .I will update GB info soon on 27thGreat! Been looking forward to this for a while. :thumb:
price ,color ,version,
Just updated the prototype ,Photo without any modification, real shootingThankyou, cant wait to see more pics, purple looks great... now I'm torn between that an MAO 🤦♂️
my net work not work well ,too much pictures i will upload tomorrow .
https://geekhack.org/index.php?topic=96905.0 (https://geekhack.org/index.php?topic=96905.0)
ps: PCB will arrvial tomorrow so i do test the led and upload pic too :thumb:
Any chance to get the nameplate again?I preferred the nametag as well, the indicator holes look too much like ESL to me but if only 1 choice ¯\_(ツ)_/¯
나의 LGM-G600S 의 Tapatalk에서 보냄
Any chance to get the nameplate again?I preferred the nametag as well, the indicator holes look too much like ESL to me but if only 1 choice ¯\_(ツ)_/¯
나의 LGM-G600S 의 Tapatalk에서 보냄
Are there any other photos of the prototype besides the back? I want to see the front and the side profile.
Are there any other photos of the prototype besides the back? I want to see the front and the side profile.
Agreed. Also, will the weight be blank or branded? I always thought exclusive weights had the coolest branding...
Are there any other photos of the prototype besides the back? I want to see the front and the side profile.
Agreed. Also, will the weight be blank or branded? I always thought exclusive weights had the coolest branding...
I'll have to disagree with you there :p Looks much cleaner with a blank weight, specially with this classic design.
There is no doubt that will have weight engraving .Are there any other photos of the prototype besides the back? I want to see the front and the side profile.
Agreed. Also, will the weight be blank or branded? I always thought exclusive weights had the coolest branding...
There is no doubt that will have weight engraving .Are there any other photos of the prototype besides the back? I want to see the front and the side profile.
Agreed. Also, will the weight be blank or branded? I always thought exclusive weights had the coolest branding...
same like e8-v1 ,e6-v2
There is no doubt that will have weight engraving .Are there any other photos of the prototype besides the back? I want to see the front and the side profile.
Agreed. Also, will the weight be blank or branded? I always thought exclusive weights had the coolest branding...
same like e8-v1 ,e6-v2
There is no doubt that will have weight engraving .Are there any other photos of the prototype besides the back? I want to see the front and the side profile.
Agreed. Also, will the weight be blank or branded? I always thought exclusive weights had the coolest branding...
same like e8-v1 ,e6-v2
Any chance to get the nameplate again?
나의 LGM-G600S 의 Tapatalk에서 보냄
Any chance to get the nameplate again?I preferred the nametag as well, the indicator holes look too much like ESL to me but if only 1 choice ¯\_(ツ)_/¯
나의 LGM-G600S 의 Tapatalk에서 보냄
I think should do 50/50 nameplate/led... not sure if that's possible but would be nice to have option of 1 or the other
awww, there's an all brass one. Too bad I can't afford another this time around. :(
Any chance to get the nameplate again?
나의 LGM-G600S 의 Tapatalk에서 보냄Any chance to get the nameplate again?I preferred the nametag as well, the indicator holes look too much like ESL to me but if only 1 choice ¯\_(ツ)_/¯
나의 LGM-G600S 의 Tapatalk에서 보냄I think should do 50/50 nameplate/led... not sure if that's possible but would be nice to have option of 1 or the other
It may be a MOQ issue for going with one design instead of both... The interest check was unfortunately split almost 50/50, going with either option would disappoint half the participants.
I chose the name plate design too, as the LED design is quite ambiguous, and I would just turn the LED off anyway if it is the only option...
Any chance to get the nameplate again?
나의 LGM-G600S 의 Tapatalk에서 보냄Any chance to get the nameplate again?I preferred the nametag as well, the indicator holes look too much like ESL to me but if only 1 choice ¯\_(ツ)_/¯
나의 LGM-G600S 의 Tapatalk에서 보냄I think should do 50/50 nameplate/led... not sure if that's possible but would be nice to have option of 1 or the other
It may be a MOQ issue for going with one design instead of both... The interest check was unfortunately split almost 50/50, going with either option would disappoint half the participants.
I chose the name plate design too, as the LED design is quite ambiguous, and I would just turn the LED off anyway if it is the only option...
What do you mean by ambiguous? As in, you can't tell which indicator is for which function? I imagine you would get used to it...
What do you mean by ambiguous? As in, you can't tell which indicator is for which function? I imagine you would get used to it...
I think he means the design. It kinda looks like "3SL" turned sideways. I would also be more excited about the indicators if the design was tweaked to look slightly different
I honestly can't figure out if it was meant to be a 3 an S (or maybe a 5) and and L. Does that stand for "exclusive"? Am I missing something more obvious? I think E71 would make more sense or perhaps patterns that don't look like latin characters
What do you mean by ambiguous? As in, you can't tell which indicator is for which function? I imagine you would get used to it...
I think he means the design. It kinda looks like "3SL" turned sideways. I would also be more excited about the indicators if the design was tweaked to look slightly different
I honestly can't figure out if it was meant to be a 3 an S (or maybe a 5) and and L. Does that stand for "exclusive"? Am I missing something more obvious? I think E71 would make more sense or perhaps patterns that don't look like latin characters
+2 on the extra key with less indicators/smaller name plate if that's even a possibility...
What do you mean by ambiguous? As in, you can't tell which indicator is for which function? I imagine you would get used to it...
I think he means the design. It kinda looks like "3SL" turned sideways. I would also be more excited about the indicators if the design was tweaked to look slightly different
I honestly can't figure out if it was meant to be a 3 an S (or maybe a 5) and and L. Does that stand for "exclusive"? Am I missing something more obvious? I think E71 would make more sense or perhaps patterns that don't look like latin characters
+1 If "3SL" is half its current size and there was one more key, I'd be all over this.
ADDED
Anything that looks remotely like "ESL" is too off putting.
+2 on the extra key with less indicators/smaller name plate if that's even a possibility...
What do you mean by ambiguous? As in, you can't tell which indicator is for which function? I imagine you would get used to it...
I think he means the design. It kinda looks like "3SL" turned sideways. I would also be more excited about the indicators if the design was tweaked to look slightly different
I honestly can't figure out if it was meant to be a 3 an S (or maybe a 5) and and L. Does that stand for "exclusive"? Am I missing something more obvious? I think E71 would make more sense or perhaps patterns that don't look like latin characters
+1 If "3SL" is half its current size and there was one more key, I'd be all over this.
ADDED
Anything that looks remotely like "ESL" is too off putting.
it sounds like most people posting on this thread wanted name plate... interesting to see that it lost the vote. i would prefer name plate too... also sad that black did not make it through.Well I for one vote for the 75E indicators... And we've got enough black boards, dark blue looks like the charm (or maybe purple)
it sounds like most people posting on this thread wanted name plate... interesting to see that it lost the vote. i would prefer name plate too... also sad that black did not make it through.Well I for one vote for the 75E indicators... And we've got enough black boards, dark blue looks like the charm (or maybe purple)
Sent from my DREA100 using Tapatalk
it sounds like most people posting on this thread wanted name plate... interesting to see that it lost the vote. i would prefer name plate too... also sad that black did not make it through.Well I for one vote for the 75E indicators... And we've got enough black boards, dark blue looks like the charm (or maybe purple)
Sent from my DREA100 using Tapatalk
Seconded. The blue looks terrific too.
I prefer the indicator lights over a nameplate. That said I think there should be a redesign of the lights (no Latin characters)I agree. 3 simple strips would have sufficed and in line with the overall design of the board.
I prefer the indicator lights over a nameplate. That said I think there should be a redesign of the lights (no Latin characters)Yep, I also really like the lights, but they do look confusing. I propably will be in anyways, but would prefere a bit of a modification.
imo if the indicator lights design was changed to just 2 or 3 holes instead of trying to form letters, we could have both indicator lights and name plateThe lights should be simple geometric shapes imo
imo if the indicator lights design was changed to just 2 or 3 holes instead of trying to form letters, we could have both indicator lights and name plateThe lights should be simple geometric shapes imo
i have already read many suggestion
so i have fix it like thisShow Image(https://i.imgur.com/pL6mFFP.png)
i have already read many suggestion
so i have fix it like thisShow Image(https://i.imgur.com/pL6mFFP.png)
Good solution. Thanks!!! I seriously never saw the 7SE, I always thought it was 3SL. Must have something to do with how I read. This makes more sense to me now. I guess we'll see what others think.
More pictures here :
https://imgur.com/a/5ZXOCiH (https://imgur.com/a/5ZXOCiH)
i have already sort the ic form .Hello,
here is the result :Show Image(https://i.imgur.com/cIdl0dZ.png)
LED version hit the high percentage,so this time we will do LED version
(nameplate version maybe next time )Show Image(https://i.imgur.com/FYnFNtB.png)
So GB will chose those color : MAO -
Gray - dark blue -dark purple -black (dark green )
i have already read many suggestion
so i have fix it like thisShow Image(https://i.imgur.com/pL6mFFP.png)
Black is normal color i think dont need make a prototype for it .it included,i have already sort the ic form .Hello,
here is the result :Show Image(https://i.imgur.com/cIdl0dZ.png)
LED version hit the high percentage,so this time we will do LED version
(nameplate version maybe next time )Show Image(https://i.imgur.com/FYnFNtB.png)
So GB will chose those color : MAO -
Gray - dark blue -dark purple -black (dark green )
In the quoted post you put that black will be one of the colours but at the top post you did not include it as one. Could you clarify if there will be a black one?
i have already sort the ic form .Hello,
here is the result :Show Image(https://i.imgur.com/cIdl0dZ.png)
LED version hit the high percentage,so this time we will do LED version
(nameplate version maybe next time )Show Image(https://i.imgur.com/FYnFNtB.png)
So GB will chose those color : MAO -
Gray - dark blue -dark purple -black (dark green )
In the quoted post you put that black will be one of the colours but at the top post you did not include it as one. Could you clarify if there will be a black one?
i have already read many suggestion
so i have fix it like thisShow Image(https://i.imgur.com/pL6mFFP.png)
So, the change is letter orientation rotated 180 degree? It still look like ESL from the other side. :-[ Don't know what to do...
Havei have already sort the ic form .Hello,
here is the result :Show Image(https://i.imgur.com/cIdl0dZ.png)
LED version hit the high percentage,so this time we will do LED version
(nameplate version maybe next time )Show Image(https://i.imgur.com/FYnFNtB.png)
So GB will chose those color : MAO -
Gray - dark blue -dark purple -black (dark green )
In the quoted post you put that black will be one of the colours but at the top post you did not include it as one. Could you clarify if there will be a black one?
I would also like to confirm whether or not there will be a black option
i have already read many suggestion
so i have fix it like thisShow Image(https://i.imgur.com/pL6mFFP.png)
So, the change is letter orientation rotated 180 degree? It still look like ESL from the other side. :-[ Don't know what to do...
If you thinks is ESL ,it should be it . in my thoughts is 75E all the time .
i have alreday make it clear .wont change again
i have already read many suggestion
so i have fix it like thisShow Image(https://i.imgur.com/pL6mFFP.png)
So, the change is letter orientation rotated 180 degree? It still look like ESL from the other side. :-[ Don't know what to do...
If you thinks is ESL ,it should be it . in my thoughts is 75E all the time .
i have alreday make it clear .wont change again
Thanks for you comprehension :thumb:i have already read many suggestion
so i have fix it like thisShow Image(https://i.imgur.com/pL6mFFP.png)
So, the change is letter orientation rotated 180 degree? It still look like ESL from the other side. :-[ Don't know what to do...
If you thinks is ESL ,it should be it . in my thoughts is 75E all the time .
i have alreday make it clear .wont change again
I'm not sure if I'm going to join, but wish you the best!
This board is phenomenal!
Looks way better flipped at least now it looks like 75E vs ESL, samples look great, very nice purple/green... Still sad I had a big plan for this board in the nametag version+1, So the nametag lovers should wait next round? My wallet is happy, heart is sad.
Oooh, 75X... I kinda like thati have already read many suggestion
so i have fix it like thisShow Image(https://i.imgur.com/pL6mFFP.png)
So, the change is letter orientation rotated 180 degree? It still look like ESL from the other side. :-[ Don't know what to do...
If you thinks is ESL ,it should be it . in my thoughts is 75E all the time .
i have alreday make it clear .wont change again
I like it, it is clearer that way.
I think it’s the E that throws some people off - maybe 75X might work, but I’m happy with it as it looks now.
Looking forward to the start. Thanks excluisive!
Like this is kind of crazy. Exclusive just do what you want. Someone is going to complain no matter what. Love the board no matter the orientation of the led and will definitely get one of them.
LED orientation isnt the deal breaker, I think it's more people wanting the name tag... The question is, will there for sure be a v2 with the nametag?
LED orientation isnt the deal breaker, I think it's more people wanting the name tag... The question is, will there for sure be a v2 with the nametag?
LED orientation isnt the deal breaker, I think it's more people wanting the name tag... The question is, will there for sure be a v2 with the nametag?
Where are you getting that more people wanted the nametag? Exclusive did a pole and it was 63/37 for the led. The only reason we are seeing people complain about the nametag is that he went with the LED.
there wouldn't be this orientation issue with name tag :-X
There was a vote and nametag got voted out by a fair margin. Is this a vocal minority piping up or did a ton of interested people ignore the vote?pretty true
Wait for R2 I suppose, and make sure to vote.
“If You Don't Vote, You Can't Complain”
Keep it back original and move on :thumb:
cant wait GB
Do you have any PCB Prototypes?literally 2 posts above yours...
Led will keep originalOh the LED are not indicators?
and GB will oepn tomorrow (30th/ August.)
persnolly thinks the led if not indicators ,change to RGB LED seems more great . :-\
Is LED indicators .i am think change it to RGB LEDLed will keep originalOh the LED are not indicators?
and GB will oepn tomorrow (30th/ August.)
persnolly thinks the led if not indicators ,change to RGB LED seems more great . :-\
Hello excluisve,Hello.
I'm definitely in on this. What time + timezone on the 30th will it start?
Hi exclusive,
So you will post the GB on Aug 30th 12am EST right?
Hi exclusive,
So you will post the GB on Aug 30th 12am EST right?
GH moderators need to approve GB posts manually. When the post appears is totally dependent on them approving it, regardless of when Exclusive posts it.
Hi Exclusive.I have already make 4 prototypes and anodized four colors
I just want to make sure... E7 purple is the same as E6-v2 purple? Because in some pictures the E6-v2 purple is very light and almost looks pink. I just want to know so I can decide. Thank you!
(Attachment Link)
(Attachment Link)
I have alreday get pcb and white color sample .
https://imgur.com/a/5v5pV9U (https://imgur.com/a/5v5pV9U)
here is the pic ,due to only 4 prototypes so grab a weight for white color .Show Image(https://i.imgur.com/dhJ2c7y.jpg)Show Image(https://i.imgur.com/Ll6BD3c.jpg)
Photos look great! Excited for the buy
Above is E -white,below is Mao
Hello excluisve,Hello.
I'm definitely in on this. What time + timezone on the 30th will it start?
I will post to GB thread but also need mods to approval,so i dont know the exactly
NY zone.30th
Hello excluisve,Hello.
I'm definitely in on this. What time + timezone on the 30th will it start?
I will post to GB thread but also need mods to approval,so i dont know the exactly
NY zone.30th
Hi exclusive, have you posted the GB post yet? I am on west coat timezone and trying to see how late I should stay up to wait for the GB post.
Thanks!
Two options of bottom layout are too few. Is it possible to support additional bottom layout in v2?Yea
hhkb... winkeless... style.
1u 1.5u 7u 1.5u 1u ... 1u 1.5u 6.25u 1.5u 1u ... 1.5u 1u 1.5u 6.25u 1.5u 1u ...
Personally I voted for Led version because I was thinking they were led indicators, not just a simple rgb led.LOL is truly led indicators.i am think change it to rgb led still not happen yet
If I knew it before I’d voted for the nametag version for sure.
Still wait it to approval
Still wait it to approval
While I refresh the GB page like every 3 second, I want to take this time to thank Exclusive for the beautiful work. I am convinced only to buy keyboard with prototype and E7's prototypes are beautiful. :)
Great work!!