Author Topic: [GB] DO60 60% PCB RGB Underglow w/ Split Spacebar & Arrows (Read 25448 times)

BlindAssassin111 · « **Reply #50 on:** Wed, 09 May 2018, 00:20:02 »

So...any update on when they are shipping? I sent you an email a couple days ago about it, but no answer yet. Would like to have some info seeing as it is quite a bit late now...

d.caminero · « **Reply #51 on:** Thu, 10 May 2018, 18:33:37 »

Quote from: BlindAssassin111 on Wed, 09 May 2018, 00:20:02

So...any update on when they are shipping? I sent you an email a couple days ago about it, but no answer yet. Would like to have some info seeing as it is quite a bit late now...

+1 here...

TechieWeirdo · « **Reply #52 on:** Thu, 10 May 2018, 19:53:19 »

Got an email with a tracking number.

BlindAssassin111 · « **Reply #53 on:** Sun, 13 May 2018, 20:40:25 »

Quote from: TechieWeirdo on Thu, 10 May 2018, 19:53:19

Got an email with a tracking number.

I still have nothing...Hopefully I get something soon.

merlin64 · « **Reply #54 on:** Tue, 15 May 2018, 22:54:01 »

Bumping this up for visibility. Sennin I would like an update please.

BlindAssassin111 · « **Reply #55 on:** Tue, 15 May 2018, 22:56:20 »

Quote from: merlin64 on Tue, 15 May 2018, 22:54:01

Bumping this up for visibility. Sennin I would like an update please.

Same...

BlindAssassin111 · « **Reply #56 on:** Thu, 17 May 2018, 18:23:25 »

Okay, so I went on the Doyu discord to see if by chance there was info from him.

Seems he is only shipping 1 PCB per day atm as they have to manually check each board for functionality because the manufacturer used the wrong soldering temp. Because of this he has only sent about 40% of the orders so far, which sucks for the 60% of us haven't received a shipment notification, as we get to wait even longer...

Wish he would make the update himself, but that is the info straight from his comments.

tex_live_utility · « **Reply #57 on:** Thu, 17 May 2018, 20:03:13 »

Quote from: BlindAssassin111 on Thu, 17 May 2018, 18:23:25

Okay, so I went on the Doyu discord to see if by chance there was info from him.

Seems he is only shipping 1 PCB per day atm as they have to manually check each board for functionality because the manufacturer used the wrong soldering temp. Because of this he has only sent about 40% of the orders so far, which sucks for the 60% of us haven't received a shipment notification, as we get to wait even longer...

Wish he would make the update himself, but that is the info straight from his comments.

That sucks! Really appreciate the dedication.

Would you mind sharing a link to their Discord?

BlindAssassin111 · « **Reply #58 on:** Thu, 17 May 2018, 20:12:01 »

Quote from: tex_live_utility on Thu, 17 May 2018, 20:03:13

That sucks! Really appreciate the dedication.

Would you mind sharing a link to their Discord?

Yes it does, hopefully it goes quick, as I am tired of waiting tbh...

The discord link is in his signature. (https://discord.gg/YkrdMpy)

sennin32 · « **Reply #59 on:** Fri, 18 May 2018, 23:59:52 »

Quote from: merlin64 on Tue, 08 May 2018, 09:55:11

Are there any updates to this?

Sent yours several days ago, should receive soon XD

yonghf · « **Reply #60 on:** Tue, 22 May 2018, 07:40:36 »

Any updates on PCB? I sent an email and messaged on Facebook enquiring on my order?

kekstee · « **Reply #61 on:** Mon, 28 May 2018, 08:21:18 »

Got mine this morning. Good looking non-glossy black.

The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led ~~resistor~~capacitor I should place there?
Standard mapping is weird, haven't had the time to look at the matrix yet. Is that code pushed to a TMK or QMK branch somewhere?

bandreadygoband · « **Reply #62 on:** Mon, 28 May 2018, 16:58:43 »

Every day I check this thread there's a new upsetting update. Really thinking I should have just went with a DZ60 from KBDFans... Albeit this is my first GB besides GMK 9009 and that went extremely smoothly.

kekstee · « **Reply #63 on:** Mon, 28 May 2018, 17:42:04 »

Friend got a DZ60 on which not all pin holes were drilled through. So it's not like everything has always been completely stellar over there either.

merlin64 · « **Reply #64 on:** Tue, 29 May 2018, 13:12:06 »

You guys can make hex files using the QMK Toolbox here: https://config.qmk.fm/#/do60/LAYOUT_all

Please be advised that the diode for Fn on split right shift is also in the wrong orientation. Sigh..

Visionaire · « **Reply #65 on:** Thu, 31 May 2018, 09:02:43 »

Kinda glad I cancelled my GB on this. So many issues and unclear communication. Hope those that got theirs are able to make 'em work. =/

bandreadygoband · « **Reply #66 on:** Thu, 31 May 2018, 10:48:33 »

Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email

BlindAssassin111 · « **Reply #67 on:** Thu, 31 May 2018, 11:09:22 »

Quote from: bandreadygoband on Thu, 31 May 2018, 10:48:33

Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email

I am wondering the same...Still have not received my tracking yet.

bandreadygoband · « **Reply #68 on:** Sun, 03 June 2018, 10:57:47 »

Quote from: BlindAssassin111 on Thu, 31 May 2018, 11:09:22

Quote from: bandreadygoband on Thu, 31 May 2018, 10:48:33
Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email

I am wondering the same...Still have not received my tracking yet.

Checked the last few weeks on the Discord... The seller seems fairly active on there. Odd. There was on user who got his without a tracking number. And on May 21st, the seller said they should "all be shipped in 1-2 weeks", and tomorrow will be 2 weeks from the post. Also, 25-30 PCBs were "ready to be shipped" as of last night?

bluesclera · « **Reply #69 on:** Mon, 04 June 2018, 08:59:59 »

Got my tracking info via email today in case anyone is curious.

bandreadygoband · « **Reply #70 on:** Mon, 04 June 2018, 09:13:31 »

Quote from: bluesclera on Mon, 04 June 2018, 08:59:59

Got my tracking info via email today in case anyone is curious.

Same here! A few more on the discord have been getting theirs as well.

kekstee · « **Reply #71 on:** Tue, 05 June 2018, 06:04:57 »

Quote from: kekstee on Mon, 28 May 2018, 08:21:18

The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led ~~resistor~~capacitor I should place there?

Since apparently nobody gives a **** about this thread, could the discord people please dig up which parts I need to get the damn thing operational?
I need the type/package size of the SMD diodes as well as the capacitor value that's installed next to each RGB LED. (D15 and CL19, specifically)

Spaghetti · « **Reply #72 on:** Tue, 05 June 2018, 12:17:12 »

I still haven't received any tracking info for this one $:-\$

d.caminero · « **Reply #73 on:** Wed, 06 June 2018, 14:01:46 »

I still have nothing about my order either.

merlin64 · « **Reply #74 on:** Wed, 06 June 2018, 14:26:12 »

Quote from: kekstee on Tue, 05 June 2018, 06:04:57

Quote from: kekstee on Mon, 28 May 2018, 08:21:18
The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led ~~resistor~~capacitor I should place there?
Since apparently nobody gives a **** about this thread, could the discord people please dig up which parts I need to get the damn thing operational?
I need the type/package size of the SMD diodes as well as the capacitor value that's installed next to each RGB LED. (D15 and CL19, specifically)

You can join his discord server at https://discord.gg/YkrdMpy

LifeZ · « **Reply #75 on:** Tue, 19 June 2018, 02:26:55 »

I received the tracking number but there is no movement after May 30th. from Taiwan

FailureToLoad · « **Reply #76 on:** Fri, 22 June 2018, 05:49:35 »

Were there any other updates to supported layouts? Because I cannot seem to get 1.25-1.25-1.25-3.0-2.75-1.25-1.25 to slot correctly.

Awful Aim · « **Reply #77 on:** Fri, 06 July 2018, 09:17:48 »

Have these all shipped? I haven't received tracking yet.

wixxzblu · « **Reply #78 on:** Fri, 06 July 2018, 10:28:04 »

I got mine already, and i did a pcb mount clear tray build with it

iPhantomMonkey · « **Reply #79 on:** Fri, 06 July 2018, 13:03:23 »

I've also received mine and tested it to verify it worked. But it didn't stand up to the stress of putting it together, two columns broke in the process, I can't figure out where, it's not like I'm inexperienced so I don't think it was me. I wish there wasn't so many difficulties with this manufacturer.

merlin64 · « **Reply #80 on:** Fri, 06 July 2018, 13:25:54 »

What do you mean by two columns broke?

theillumedpanda · « **Reply #81 on:** Fri, 06 July 2018, 14:17:36 »

I‘ve been looking for a black 60% QMK-powered PCB, but couldn‘t find one. Are there any leftovers?

iPhantomMonkey · « **Reply #82 on:** Fri, 06 July 2018, 15:20:13 »

Quote from: merlin64 on Fri, 06 July 2018, 13:25:54

What do you mean by two columns broke?

They just didn't work after I soldered the switches in. I used a multimeter to cherry the connections between the switches and they were continuous so I don't know what happened if maybe somehow the column lost connection with the controller or what

d.caminero · « **Reply #83 on:** Sun, 08 July 2018, 16:38:03 »

still haven't received mine. I received an email saying they ran out of black pcb's and if it was okay for me to get a white one, aswered the next day but nothing new since then...

Spaghetti · « **Reply #84 on:** Sun, 08 July 2018, 18:05:14 »

Still haven't received mine. I've had no shipping notifications or contact of any kind.

sennin32 · « **Reply #85 on:** Sun, 15 July 2018, 06:02:57 »

Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough

)
If you guys haven't received your pcb, please tell me

Awful Aim · « **Reply #86 on:** Tue, 17 July 2018, 09:36:31 »

Quote from: sennin32 on Sun, 15 July 2018, 06:02:57

Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough )
If you guys haven't received your pcb, please tell me

I haven't received mine. PMing you as well.

EDIT: Wait, I ordered the Chiwi60, I bet the PCB is coming with that order. Whoops.

tex_live_utility · « **Reply #87 on:** Wed, 18 July 2018, 07:14:56 »

Got an email on June 15 asking if I was willing to change the PCB color from black to white, but I have not heard anything since then.

sennin32 · « **Reply #88 on:** Wed, 18 July 2018, 09:18:49 »

Hi,
Could you tell me your order #?
We didn't get reply for 3 orders O_Q
Not sure if the mail system lost it.

d.caminero · « **Reply #89 on:** Thu, 19 July 2018, 14:23:22 »

Quote from: sennin32 on Sun, 15 July 2018, 06:02:57

Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough )
If you guys haven't received your pcb, please tell me

Hey there,
I have yet to receive my PCB. You told me via email that it was sent and I asked for a tracking number, but got no response since then. Could you PM me the tracking number please?

Thanks!

sennin32 · « **Reply #90 on:** Tue, 11 September 2018, 02:17:18 »

We've made 2nd batch.
and LED works nice this time

sennin32 · « **Reply #91 on:** Sat, 15 September 2018, 06:20:45 »

Hi,
The Group has ended several months ago.
We got some extra PCBs.
If you missed this groupbuy but still want to get one.
Check it here : https://shopkey.doyustudio.com/001pcb60

News:

Author Topic: [GB] DO60 60% PCB RGB Underglow w/ Split Spacebar & Arrows (Read 25448 times)