Author Topic: [GB] Fox-orange 80% Custom TKL (GB Closed | All shipped | Collecting Feedbacks)  (Read 78944 times)

0 Members and 1 Guest are viewing this topic.

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Welcome to FOX -orange the  Group Buy!



Buyers' photos




Update on Aug 31th, 2017

Hi all,

Senter here. All packages have been send out and some people have already received their boards.

This is the first time we host a group buy for keyboards on Geekhack. 40 kits were sold to 37 customers. Thank you all for joining this GB. Thank you for putting your trust on an inexperienced team. I hope you will like the keyboard.

There are some experiences I'd like to share with you.
  • First, we didn't design the google form very reasonable and as a result it took me a lot of time to communicate with some of you to confirm the information.
  • Second, I didn't think over about the options. As a result, there were too many options to make. Three layouts and with/without nameplates, that's 6 types of cases for just 40 kits. We also offered too many color options which seriously increased our and the factory's workload. You know it's much more expensive to make 40 different cases than 40 same cases. I negotiated with the factory many times to make it happen.
  • I learnt a lot about your demands. As many people suggested, we changed the design of the seam in the middle of two pieces, changed the suitcase, added another option for the plate, and so on.
  • There are also some requests we didn't make true, like ALPS plate/pcb, split backspace.

I really learnt a lot from this group buy. I believe we can do better the next time.

There're also several things we didn't make perfect.
  • We didn't print numbers on the nameplate of founder editions. They were printed Orange in place. We didn't make it right because the technician was tired with the tons of options of small order.
  • For 2 or 3 plates we didn't make the color right. The fault is on our side that the packing people told me that after the packages were send out.
  • It took us 10 days to examine all the 40 boards. We checked the packages carefully but I'm still not 100 percent sure all the boards are perfect.

If you find the kits have any problems you can't accept, the ones I mentioned or not, please feel free to contact me.

I won't call our first GB is a successful one since there are some known problems. I'm really sorry to those whom were affected. I promise I did my best to make everything right but I failed.

Thank you again for joining our first GB. We will make it better the next time.

Regards,
Senter
08/31/2017



Update on July 16th, 2017

GB is no longer accepting orders. We will send out all the invoices and organize the orders in the following days.

After we accept all the payments or after July 25th, we will start manufacturing and sourcing the keyboard parts.

Thank you for your support!




Update on July 11th, 2017

New photos were updated here



Please check the information or your order here and reply to me if there's any thing
wrong with your order. You can still change the information before GB is closed.

We're sending out invoices to you. There will be an additional invoice if you selected the
assembly service. You can still change the colors and other options after you paid the
invoice, so please feel free to pay. We will start making the cases according to the order
of payment, but you can pay the invoice as late as July 25th.



Update on July 7th, 2017

New photos were updated here






Update on July 4th, 2017

New renders updated here



Renders are not real photos. These can only help you to image how the final keyboards will look like.

New photos with keycaps on the keyboard will be updated later!



Update on July 3rd, 2017


  • We will also offer MX openable cutout plate! The normal MX cutout plate is still the default option. If you need the plate supports switchtop remove, please leave a message at the end of the form when you fill in it.
  • There was a small gap between the top and bottom cases. As many of you requested, we decide to remove the gap and make the keyboard has a cleaner look. Please PM me if you have already filled in the form but don't like this change.




We are coming!

I named it Orange because the inspiration comes from oranges.
I provide the thinner design and high quality material.
They make the keyboard out of the ordinary. Wish you will like it.


White color with micro-arc oxidation:




More photos of the finished protoype here http://imgur.com/a/uYth8 (updated)

Specifications:

  • 6063 Anodized Aluminum / 7075 Microarc oxidation on Aluminum
  • Anodized aluminum or polished brass weight
  • Fully Programmable PCB using Bootmapper Client
  • SS and aluminum plate
  • support standard ANSI layout - 6.25u spacebar with 1.25u modifiers - both WKL &WK
  • Available colors: white, Red, Silver, other color click here

Quality control :

This is our first GB in the community, so we will try our best to offer best quality.

I know the X60 GB makes some of you guys worry about our quality control since our kits will also be manufactured in China.

Our close partner own the factory by himself, so we have more control on the quality.

We will also take photos/videos before shipping packages out. Hope this can alleviate your concerns a little bit.

The pricing :

  • Full kit (Brass Weight): $290
  • Full kit (Aluminum Weight): $280
  • Extra name plate with custom text: $5    blank  $3
  • Extra PCB: $60
  • Extra plate: $20
  • Extra weight: aluminum=$15, brass=$20
  • 4% PayPal fee.
  • Assemble with Cherry MX (Red, Brown, Black, Blue) switches: $80
  • Assemble with Gateron MX switches: $60
  • package suitcase: free

*Founders edition:  with individual numbering (limited to 11) for brass nameplate

Shipping fee:

Courier Service Provider: EMS (ePacket). Please PM me if you need faster delivery service.

Shipping from CHINA

A full kit ~3.5 kg(with suitcase )

  • United States, Germany       $42
  • England, France, Canada      $40
  • Australia                             $60
  • Asia                                    $35

Expected timeline:

« Last Edit: Sat, 23 September 2017, 10:37:04 by senter »

Offline Moderation Team

  • * Global Moderator
  • Posts: 111
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #1 on: Sun, 02 July 2017, 01:58:50 »
As a reminder to all, CAVEAT EMPTOR

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #2 on: Sun, 02 July 2017, 03:54:13 »

Offline blacksimon

  • Posts: 189
  • illuminati.works
    • illuminati.works
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #3 on: Sun, 02 July 2017, 04:05:21 »
The GB order form doesnt have a place to input the custom text for the name plate

Also, which color is the one shown in the pictures? (as well as the color of the plate)


Edit: I just ordered the silver with golden plate, i hope that's the one in the pictures :)
« Last Edit: Sun, 02 July 2017, 04:31:51 by blacksimon »

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #4 on: Sun, 02 July 2017, 05:26:52 »
The GB order form doesnt have a place to input the custom text for the name plate

Also, which color is the one shown in the pictures? (as well as the color of the plate)


Edit: I just ordered the silver with golden plate, i hope that's the one in the pictures :)
Thanks for u suggestion i have add it
your select is correct

Offline blacksimon

  • Posts: 189
  • illuminati.works
    • illuminati.works
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #5 on: Sun, 02 July 2017, 05:37:45 »
Thank you! also I just realized there was no option for aluminum vs brass weight, perhaps it's supposed to be in the position of "option 3"
« Last Edit: Sun, 02 July 2017, 05:45:39 by blacksimon »

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #6 on: Sun, 02 July 2017, 06:28:26 »
 :thumb: :thumb:
Thank you! also I just realized there was no option for aluminum vs brass weight, perhaps it's supposed to be in the position of "option 3"
:thumb: :thumb: :thumb: update

Offline BunnyLake

  • The OG HHKB Master
  • Posts: 7236
  • X
    • [CTRL]ALT
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #7 on: Sun, 02 July 2017, 07:24:20 »
Gorgeous design, reminds me of a much classier version of the realforce case


Sent from my iPhone using Tapatalk
I'M IN THE PROCESS OF MOVING RIGHT NOW, WILL BE BACK AROUND SOON

Offline nurupism

  • Posts: 28
  • Location: Canada
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #8 on: Sun, 02 July 2017, 08:24:57 »
Really interested in joining, but I have some questions about the GB form.
  • For the Small Blocks layout, is it the same as this one (one 6.25u + six 1.25u)? http://i.imgur.com/IfHp2Ue.jpg
  • The nameplate color is a mandatory field. If I don't want a nameplate, will it just be ignored?
  • The weight color field, is that for only the aluminum weight, or does it also include brass?
Thanks!

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #9 on: Sun, 02 July 2017, 08:38:24 »
Really interested in joining, but I have some questions about the GB form.
  • For the Small Blocks layout, is it the same as this one (one 6.25u + six 1.25u)? http://i.imgur.com/IfHp2Ue.jpg
  • The nameplate color is a mandatory field. If I don't want a nameplate, will it just be ignored?
  • The weight color field, is that for only the aluminum weight, or does it also include brass?
Thanks!
Hello, for the 1st question your post is correct.2nd if u dont want namepalte just choose another
3rd.color just for alu  hope it could help u  :blank:

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #10 on: Sun, 02 July 2017, 11:34:54 »
Gorgeous design, reminds me of a much classier version of the realforce case


Sent from my iPhone using Tapatalk
Thank you ;)

Offline onmybikedrunk

  • Posts: 236
  • Location: Portland, OR
    • Danny Woods - Industrial Designer
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #11 on: Sun, 02 July 2017, 13:21:20 »
I love the soft edges.  It's a nice change of pace. The scene in China is really packing a punch lately...


Question: Can we order more than one name plate?  I would like one personal and one more adaptable for the masses in case I ever decide to sell/trade in the future.

Offline OneNightFriend

  • Posts: 261
  • Location: US-LA
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #12 on: Sun, 02 July 2017, 15:21:39 »
I love how the weights look on this case. Too bad I'm too broke right now for a new board :(

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #13 on: Sun, 02 July 2017, 16:10:52 »
I love the soft edges.  It's a nice change of pace. The scene in China is really packing a punch lately...


Question: Can we order more than one name plate?  I would like one personal and one more adaptable for the masses in case I ever decide to sell/trade in the future.

I heard about the X60 tragedy and I understand your concerns. The difference is our close partner own the factory by himself, so we have more control on the quality. We will also take photos/videos before shipping them out. Hope this alleviate your concerns.

Yes. There's a 'Do you need extra parts' question in the form. You can write down what you need and the details there.

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #14 on: Sun, 02 July 2017, 22:04:27 »
Gorgeous design, reminds me of a much classier version of the realforce case


Sent from my iPhone using Tapatalk
:thumb: :thumb:

Offline jacky

  • Posts: 444
  • Location: UK
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #15 on: Sun, 02 July 2017, 23:10:55 »
Woot. Is live
Is there a prototype of the purple? Actually super interested in this.

Offline 19820815

  • Posts: 10
  • Location: BeiJing
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #16 on: Mon, 03 July 2017, 03:39:34 »
on my way

wait me old driver

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #17 on: Mon, 03 July 2017, 04:44:45 »
on my way

wait me old driver
Bi~,please get on

Offline janglad

  • * Vendor
  • Posts: 632
  • Location: Belgium
  • qoda.studio
    • Clavier.xyz
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #18 on: Mon, 03 July 2017, 07:36:29 »
Could you please make it so the plate supports switch top removal? Doesn't seem to be the case in the pictures and that comes close to being a deal breaker for me :(

Also, I would love to see a picture of this board with caps on it ;)

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #19 on: Mon, 03 July 2017, 08:11:57 »
Woot. Is live
Is there a prototype of the purple? Actually super interested in this.

Sorry man. We've only made 4 prototypes and purple is not included.


Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #20 on: Mon, 03 July 2017, 08:27:24 »
Could you please make it so the plate supports switch top removal? Doesn't seem to be the case in the pictures and that comes close to being a deal breaker for me :(

Also, I would love to see a picture of this board with caps on it ;)

Yes, we discussed about the switch top removal plate and we decide to offer this option as well. Please leave a message about the plate type at the end of the form when you fill in the form.

We will update the photos in one day or so. The prototypes were send out to our distributors in China for reviewing. I can take more photos after we got the prototypes. BTW, all our distributors highly praised the quality of our keyboard!

Offline KetchyKech

  • Posts: 656
  • Location: New York
  • ∴∵∴◇❖◇∴∵∴
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #21 on: Mon, 03 July 2017, 10:40:05 »
put an order in, thank you for bringing this to us  :thumb:


(kyoot carrying case btw, the gf is gunna eat that up!  :eek:)
∴∵∴◇Time TKL--VE.A--F&T 1916--Cajal--Octagon v2◇∴∵∴

Offline jacky

  • Posts: 444
  • Location: UK
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #22 on: Mon, 03 July 2017, 12:08:31 »
Woot. Is live
Is there a prototype of the purple? Actually super interested in this.

Sorry man. We've only made 4 prototypes and purple is not included.
That's ok. I will in.Really love this board.

Offline sklin

  • Posts: 35
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #23 on: Mon, 03 July 2017, 12:16:16 »
Gorgeous. Thought I won't buy any TKL but this becomes the exception.

In and thinking about extra weights :P

Looking forward to your future projects! :thumb:

Offline kiettv12

  • Posts: 32
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #24 on: Mon, 03 July 2017, 12:32:16 »
so the keyboard is flat ? no angle ?
please post shipping price for asia too

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #25 on: Mon, 03 July 2017, 12:57:04 »
put an order in, thank you for bringing this to us  :thumb:


(kyoot carrying case btw, the gf is gunna eat that up!  :eek:)

Thank you for the support!

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #26 on: Mon, 03 July 2017, 13:08:53 »
so the keyboard is flat ? no angle ?
please post shipping price for asia too

There will be rubber mount in the bottom which will pump it only a little bit.

I will update the shipping price for Asia later. You can expect it lower than shipping to US.

Offline PriusProblems

  • Posts: 133
  • Location: United Kingdom
  • No ISO, no interest.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #27 on: Mon, 03 July 2017, 14:16:14 »
Looking at the plate - is this not ISO compatible?

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #28 on: Mon, 03 July 2017, 18:02:21 »
Gorgeous. Thought I won't buy any TKL but this becomes the exception.

In and thinking about extra weights :P

Looking forward to your future projects! :thumb:
Thank you ;)

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #29 on: Mon, 03 July 2017, 20:59:41 »
Looking at the plate - is this not ISO compatible?

Both the plate and PCB are ISO compatible

Offline cherpalla

  • Posts: 370
  • Location: Seattle, WA
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #30 on: Mon, 03 July 2017, 21:40:10 »
No one ever does rose gold  :mad:

Seriously, though. This is gorgeous. Thinking about going for it, in spite of me never getting my rose gold wishes answered.
c h e r

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #31 on: Mon, 03 July 2017, 21:55:31 »
No one ever does rose gold  :mad:

Seriously, though. This is gorgeous. Thinking about going for it, in spite of me never getting my rose gold wishes answered.
It have rose gold dude . i will update the color . :thumb:

Offline zacheadams

  • Posts: 343
  • Location: Washington, DC
  • Friendly Neighborhood Keyboard Enthusiast
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #32 on: Mon, 03 July 2017, 22:15:45 »
This is a super cool design.  If I actually wanted another TKL I would get in on it with the white one.  Best of luck do you dude!

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #33 on: Mon, 03 July 2017, 23:07:00 »
This is a super cool design.  If I actually wanted another TKL I would get in on it with the white one.  Best of luck do you dude!
Best luck to you too,dude wish u can pick one up

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #34 on: Tue, 04 July 2017, 06:01:20 »
I love how the weights look on this case. Too bad I'm too broke right now for a new board :(
Thank you .Best wishes for you! ;)

Offline xeverie

  • Posts: 3
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #35 on: Tue, 04 July 2017, 06:24:37 »
So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice  :thumb:

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising  :-X

Someone mentioned images of the case with keycaps -- that'll be great too.

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #36 on: Tue, 04 July 2017, 08:49:09 »
So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice  :thumb:

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising  :-X

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #37 on: Tue, 04 July 2017, 10:58:51 »
Woot. Is live
Is there a prototype of the purple? Actually super interested in this.

Sorry man. We've only made 4 prototypes and purple is not included.
That's ok. I will in.Really love this board.
Thank you for the support. :thumb:

Offline cherpalla

  • Posts: 370
  • Location: Seattle, WA
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #38 on: Tue, 04 July 2017, 12:20:18 »
So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice  :thumb:

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising  :-X

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Is the white really that bright irl? Or is that the photo?
c h e r

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #39 on: Tue, 04 July 2017, 12:46:12 »
So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice  :thumb:

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising  :-X

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Is the white really that bright irl? Or is that the photo?


It's really very bright. Only the white color is not anodized, it's made by another technique.

Offline JDragon

  • Posts: 469
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #40 on: Tue, 04 July 2017, 13:41:02 »
So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice  :thumb:

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising  :-X

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Is the black glossy?

Offline cherpalla

  • Posts: 370
  • Location: Seattle, WA
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #41 on: Tue, 04 July 2017, 14:11:28 »
So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice  :thumb:

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising  :-X

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Is the white really that bright irl? Or is that the photo?


It's really very bright. Only the white color is not anodized, it's made by another technique.

Alright, I'll keep any eye on this thread!
c h e r

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING.
« Reply #42 on: Tue, 04 July 2017, 21:27:50 »
So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice  :thumb:

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising  :-X

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Is the black glossy?

Yes, all the cases except the white one will be glossy but only a little.
« Last Edit: Tue, 04 July 2017, 21:30:17 by senter »

Offline papa

  • Posts: 26
Re: [GB] Fox-orange 80% Custom TKL OPENING. Updated July 4th
« Reply #43 on: Wed, 05 July 2017, 05:34:00 »
Can't wait anymore

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] Fox-orange 80% Custom TKL OPENING. Updated July 4th
« Reply #44 on: Wed, 05 July 2017, 18:16:53 »
I hate to be "that guy", but my favorite thing about this keyboard was the slim profile and the small gap between the top and the bottom.  That gap made it perfect and really unique  :(

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 995
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox-orange 80% Custom TKL OPENING. Updated July 4th
« Reply #45 on: Wed, 05 July 2017, 20:28:12 »
I hate to be "that guy", but my favorite thing about this keyboard was the slim profile and the small gap between the top and the bottom.  That gap made it perfect and really unique  :(

Hey man, I totally understand your felling. We designed that gap at first because I like it. However most people prefer the case without the gap. It was a hard decision that we removed it.

The case still looks beautiful without the gap, in another way though.

Offline Pedicabo_Irrumabo

  • Posts: 12
  • Location: Massachusetts
Re: [GB] Fox-orange 80% Custom TKL OPENING. Updated July 4th
« Reply #46 on: Thu, 06 July 2017, 14:26:20 »
I'm new at building keyboards, so please excuse my ignorance. What would the assemble service include?

Offline merlin64

  • Posts: 1273
  • Location: Seattle, WA
    • MechMerlin
Re: [GB] Fox-orange 80% Custom TKL OPENING. Updated July 4th
« Reply #47 on: Thu, 06 July 2017, 15:13:30 »
I like the curves of the keyboard, it kind of reminds me of a "larger" ducky mini lol!

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Fox-orange 80% Custom TKL OPENING. Updated July 4th
« Reply #48 on: Thu, 06 July 2017, 15:24:07 »
I'm new at building keyboards, so please excuse my ignorance. What would the assemble service include?

Presumably full assembly. Stabs, switches, everything but firmware.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline eksuen

  • Posts: 614
  • Location: Torgue Zone
  • Ambassador of explosions.
Re: [GB] Fox-orange 80% Custom TKL OPENING. Updated July 4th
« Reply #49 on: Thu, 06 July 2017, 16:42:32 »
If I want to order 2 full kits, do I just fill out the form a second time?