What is the difference between Orion V3 and Orion V2.5?
Show Image(https://i.imgur.com/xlz7LIL.png)
while having read the disclaimer, is there a photo of what to roughly expect for the other colors? interested in grayShow Image(https://i.imgur.com/e3EyUPw.png)
this seems to be the gray, right? going by the last picture that shows an even brighter one which I assume is then silver in comparisonShow Image(https://i.imgur.com/RyUgMLi.png)
Show Image(https://i.imgur.com/xlz7LIL.png)
while having read the disclaimer, is there a photo of what to roughly expect for the other colors? interested in grayShow Image(https://i.imgur.com/e3EyUPw.png)
this seems to be the gray, right? going by the last picture that shows an even brighter one which I assume is then silver in comparisonShow Image(https://i.imgur.com/RyUgMLi.png)
Will it be possible to just purchase the PCB + plate, without the kit? (for those with existing Duck Orion, that want to move to USB-C)
while having read the disclaimer, is there a photo of what to roughly expect for the other colors? interested in grayShow Image(https://i.imgur.com/e3EyUPw.png)
this seems to be the gray, right? going by the last picture that shows an even brighter one which I assume is then silver in comparisonShow Image(https://i.imgur.com/RyUgMLi.png)
Can we make multiple orders if we fill the form out multiple times, similarly to the Viper/Eagle V3?
Any details on the PCB? QMK? Would love to know if Hiney's usb-C pcb is compatible if it's ever released.
Sent from my Pixel 3 using Tapatalk
can we see what the red will look like? ^_^
If you manage to do both within 100 sets. Or should I restrict it to one only? ;)
No matter how fast are you, BOT always win :mad:If you manage to do both within 100 sets. Or should I restrict it to one only? ;)
Lol your call. I think that if someone is fast enough to get in more than once more power to them. Just wanted to make sure we are clear to do so.
Nah, there was one dude in the Viper round that got 2 boards with distant (by time) order numbers.No matter how fast are you, BOT always win :mad:If you manage to do both within 100 sets. Or should I restrict it to one only? ;)
Lol your call. I think that if someone is fast enough to get in more than once more power to them. Just wanted to make sure we are clear to do so.
Where is it stated that Orion 2.5 has USB-C? I had the impression this post implied that Orion 3 has USB-C.What is the difference between Orion V3 and Orion V2.5?
About 0.5, the bottom design and usb c.
Here's a heads up...MoreShow Image(http://)
Where is it stated that Orion 2.5 has USB-C? I had the impression this post implied that Orion 3 has USB-C.What is the difference between Orion V3 and Orion V2.5?
About 0.5, the bottom design and usb c.
I did spot that Elton said the PCB / plate is not compatible with older Orions, but I’m not sure why.
It is USB C.Awesome, thanks!
Here's a heads up...Image is broken :(MoreShow Image(http://)
Pretty sure that's intentional. Gotta be fast to get the pregame deets.Here's a heads up...Image is broken :(MoreShow Image(http://)
what kind of plastic plate are you offerring? polycarbonate? pom? or acrylic?
what kind of plastic plate are you offerring? polycarbonate? pom? or acrylic?
It is a secret plastic formula. ;)
what kind of plastic plate are you offerring? polycarbonate? pom? or acrylic?
It is a secret plastic formula. ;)
Is this a new material for Duck keyboards? Are there any sound tests? I looked around and wasn't able to find any.
Very interested, I was going for aluminum but may just go with plastic.
Does the case support H87c PCB?
Does the case support H87c PCB?
Is the Plastic plate polycarbonate or acrylic?
what kind of plastic plate are you offerring? polycarbonate? pom? or acrylic?
It is a secret plastic formula. ;)
Darn, filled it out once and after hitting submit had to do the "I'm not a robot thing" and then it reloaded the form with nothing in there.
Hope I was quick enough on the second try.
when can we expect the list of winners?
It's been some time since I last raced to fill a google form at 3 in the morning. Good night!
It's been some time since I last raced to fill a google form at 3 in the morning. Good night!
12mins past and still looks closed?
12mins past and still looks closed?
when can we expect the list of winners?
12mins past and still looks closed?
I reopened the form so people can edit their submission.
so how does this work? is it a raffle for 100 spots?fcfs for 100 spots
I just edited my form, will this when I initially submitted the form?
the wait is awful. my family are saying im grumpy... they would never understandIt is okay, I love you anyway<3
If I edit my form will this send my form to the back of the line?Nope. Trust me
If I edit my form will this send my form to the back of the line?I believe not, and neither does another user abit hight up on this topic, Sirieous.
If I edit my form will this send my form to the back of the line?
Have the winners been announced? The spreadsheet seems empty to me still.Not yet, but might be announced today.
Last 10 entries:
Would really appreciate if you can share the timestamp of the 100th entry :)
That is impressive!Last 10 entries:
Would really appreciate if you can share the timestamp of the 100th entry :)
10/16/2020 21:00:59
10/16/2020 21:00:59
10/16/2020 21:00:59
10/16/2020 21:01:00
10/16/2020 21:01:00
10/16/2020 21:01:00
10/16/2020 21:01:00
10/16/2020 21:01:00
10/16/2020 21:01:01
10/16/2020 21:01:01
69 nicenice
69 nicenice
#16 :) naisu! My first ever win, missed out on primus cause I went out shopping with the gf.nice hands. I gotta rethink my strat to get quicker spots
sorta new to the whole thing, is there anything else I need to do if I made the list? do I just wait for an invoice through my email?
My confirmation email was later than 61 seconds but perhaps that's not the way it's calculated. I need a shorter username for these things...You just need to submit the form with anything in it, and then change it afterword
Does anyone know how one would go about getting a Snow-Pro Alps PCB/plate for this board? I saw a teaser of it on Duck's IG, but have no clue how to actually get one. Thanks!Message Snow (@snow_02d) on Instagram for instructions on how to purchase their PCBs/plates :)
My confirmation email was later than 61 seconds but perhaps that's not the way it's calculated. I need a shorter username for these things...You just need to submit the form with anything in it, and then change it afterword
My confirmation email was later than 61 seconds but perhaps that's not the way it's calculated. I need a shorter username for these things...You just need to submit the form with anything in it, and then change it afterword
Does anyone know how one would go about getting a Snow-Pro Alps PCB/plate for this board? I saw a teaser of it on Duck's IG, but have no clue how to actually get one. Thanks!Message Snow (@snow_02d) on Instagram for instructions on how to purchase their PCBs/plates :)
:thumb:
Will there be a group buy run by anyone for the internal weight?
Definitely not a race of who can type 1 character faster, also a real douche move to do this.My confirmation email was later than 61 seconds but perhaps that's not the way it's calculated. I need a shorter username for these things...You just need to submit the form with anything in it, and then change it afterword
Ah, I don't know why I didn't think of this. This was literally a race of who can type 1 character in each box fastest lol damn. I filled out all my info; that's probably why I was a whole 30 seconds slower than the slowest time
can I change my color of choice, or is it locked already...Check the details in the form link regarding what's possible to change and when.
also very excited to join my first duck GB, thanks
snow_02d on IG said that the V2.5 Alps PCB/plates are out of stock with no plans to restock them. Looks like we are out of luck for Alps builds :(I would think that there is still possibility of Hiney doing Alps plate and PCB for it.
snow_02d on IG said that the V2.5 Alps PCB/plates are out of stock with no plans to restock them. Looks like we are out of luck for Alps builds :(I would think that there is still possibility of Hiney doing Alps plate and PCB for it.
snow_02d on IG said that the V2.5 Alps PCB/plates are out of stock with no plans to restock them. Looks like we are out of luck for Alps builds :(I would think that there is still possibility of Hiney doing Alps plate and PCB for it.
I think h87c should fit, I'll confirm when I get mine! plate will be tougher, afaik Duck doesn't release plate files usually.
For people who have experienced duck plates, I'm thinking of getting 2 plates but can't decide on whether or not stainless steel is a good option as opposed to alu or plastic. Any words of advice?
Soooo what colors yall going with? :eyes:Silver on silver, keeping it classic.
Soooo what colors yall going with? :eyes:black top, silver bottom. business in the front and party in the back
Soooo what colors yall going with? :eyes:
if anyone doesn't want theirs i would love to take it off your hands
Hoping silver top red bottom turns out as nice as viper v3/octagon v3 ;DYou aren't kidding (https://i.imgur.com/eUjjYUp.jpg).
Black and black ;D
Have invoices been sent out yet?
Have invoices been sent out yet?you can follow the status of invoicing in the spreadsheet
I am starting to invoice now.be gentle
Paypal conversion rates are borderline theft. If you paid using your credit card and paid in USD instead the rate would be much better
I'm trying to update my address as I'm moving. It says when emailing to provide the order number but not sure which that is. Is it the invoice# in paypal?
I'm trying to update my address as I'm moving. It says when emailing to provide the order number but not sure which that is. Is it the invoice# in paypal?
Open the google sheet in the first post and then look up on the right column
Question for duck owners, what is the pbt plate like? Would you say feel and sound is similar to pom?
Missing out on this GB is the worst thing I've done in a while...There will always be something worse waiting around the corner so cheer yourself up
Question for duck owners, what is the pbt plate like? Would you say feel and sound is similar to pom?
I dont remember duck offering pbt but I dont know **** so I could totally be wrong here. Anyways I have a pbt plate on my sally and would say it probs feels closer to poly than pom, but its hard to make any direct comparison. The sound is unique and the feel is very nice, not too flexy but a lil bit. Id recommend pbt plates tho if you can get one. Pbt plate with some nice pbt keycaps sounds fantastic.
Is there any shipping estimate on this board
This product is made to order and may take up to 6 months after order.
Any updates?duck doesn't do updates. they run group buys and then just delivers
Will anyone be selling weights for these boards? Are there a way to get them? Never had a duck keyboard..
anyone is willing to sell his V 2.5? Willing to add 100-200 USD more to the price you paid .Sorry buddy. I think most people consider this one a keeper
Message me
Thank you
Just noticed a new tracking column added to the spreadsheetLets hope!
Shipping soon?! :eek:
Did you buy one aftermarket from KR?
Surely there will be tracking information in May, right?
Hello all,
It has been a long time since I have posted here. It is time for shipping. I was told cases that are grey and black will be shipped this week. The rest of the orders will be shipped 2 weeks after.
NO MORE ADDRESS CHANGES!
Thanks for all your patience!
Yes, finally! Can't wait for this :) Its going to be a busy quarter for me :). Building 7V, Duck, maybe zenith if it comes & Kara.
did anyone get tracking yet was supposed to go out this week right?I ordered grey and haven't gotten anything yet :(
did anyone get tracking yet was supposed to go out this week right?
Seems like tracking is out for some people :) Please send photos when you receive them fam <3
What a lovely surprise, the board showed up at my doorstep just now :cool:Nice! mine should arrive tomorrow.
Mine also just appeared at my doorstep. no tracking or anything.Tracking was on the google doc sheet
It's criminal we have no pics. Come on people.
It's criminal we have no pics. Come on people.
https://imgur.com/a/BT2Ylxr
Anything else you wanna see?
Thank you !! Super excited for mine to come in.It's criminal we have no pics. Come on people.
https://imgur.com/a/BT2Ylxr
Anything else you wanna see?
First time I've got a gray Duck board, and it's STUNNINGHoly crap that grey came out amazing. Guess I'm going grey for my next duck GB.Show Image(https://i.imgur.com/xpxukJw.jpg)
Does anyone know how to change keymappings of the keyboard?Duck boards use a application called O2D + DFU and i have had success with the application in the past but I tried it with the Orion and wiped all the keysets lol. I found it easier to use QMK and QMK toolbox, in order to put the keyboard in bootloader mode you need to unplug the keyboard then hold down the backspace key and plug the board back in.
Do the indicator leds still work with qmk ?QMK will allow you to set RGB controls on the board but it you cannot set a static color as you could with other Duck boards. Even with the software O2D it will not allow you to set a static color so it seems as though the option was removed for this board or maybe the version I am using is the not correct.
Do the indicator leds still work with qmk ?QMK will allow you to set RGB controls on the board but it you cannot set a static color as you could with other ****s boards. Even with the software O2D it will not allow you to set a static color so it seems as though the option was removed for this board or maybe the version I am using is the not correct.
Silvers are shipped ;D
It's on this spreadsheet: https://docs.google.com/spreadsheets/d/e/2PACX-1vR5fo35Kt_3XK1GLzaa9_fl39FLfy7gsjG0a5ezx6T8pnGTyOqrVZPKDpNL4H7WRxWXkL8P83c8SWjY/pubhtml?gid=1232694990&single=trueSilvers are shipped ;D
I didn’t get a tracking number for my silver one, are we supposed to get tracking numbers ?
i was missing a plate screw. ordered these as replacement: https://www.mcmaster.com/94500A262/
still need to build my board. might spin an h87c that fits. also need to do some FR4 plates, the plate mount tabs and spacebar orientation (north now) are different, so my existing jane v1/orion plates won't work. that'll be fixed soon enough :)
i was missing a plate screw. ordered these as replacement: https://www.mcmaster.com/94500A262/
still need to build my board. might spin an h87c that fits. also need to do some FR4 plates, the plate mount tabs and spacebar orientation (north now) are different, so my existing jane v1/orion plates won't work. that'll be fixed soon enough :)
i was missing a plate screw. ordered these as replacement: https://www.mcmaster.com/94500A262/
still need to build my board. might spin an h87c that fits. also need to do some FR4 plates, the plate mount tabs and spacebar orientation (north now) are different, so my existing jane v1/orion plates won't work. that'll be fixed soon enough :)
How do I get the indicator LEDs to work? I must be an idiot.
Was there anyone else who was missing case screws? And if so, was anyone able to find where to get replacements?
Hi all, is there anybody making weights for the Orion 2.5? I know about this guy, that makes uncoated brass weights, which will get patina over time.
https://www.reddit.com/r/mechmarket/comments/n7f5y8/bulk_duck_orion25_accessories_internal_external/?utm_source=share&utm_medium=ios_app&utm_name=iossmf
The patina is not a showstopper, in fact I may like it. But I normally like to look at a few options before I pull the trigger.
Any further suggestions?
Hi all, is there anybody making weights for the Orion 2.5? I know about this guy, that makes uncoated brass weights, which will get patina over time.
https://www.reddit.com/r/mechmarket/comments/n7f5y8/bulk_duck_orion25_accessories_internal_external/?utm_source=share&utm_medium=ios_app&utm_name=iossmf
The patina is not a showstopper, in fact I may like it. But I normally like to look at a few options before I pull the trigger.
Any further suggestions?
The link he provided is No.23
Check out No. 23. Recently bought some weights from him.
Anyone know what the ETA shipping date for the extras are?
Do the indicator leds still work with qmk ?QMK will allow you to set RGB controls on the board but it you cannot set a static color as you could with other Duck boards. Even with the software O2D it will not allow you to set a static color so it seems as though the option was removed for this board or maybe the version I am using is the not correct.
Which version? I tried the latest version and prior ones I had but none worked for me so I went with QMK.
Nice thanks, i will try that version and see if it will work for me.Which version? I tried the latest version and prior ones I had but none worked for me so I went with QMK.
I'm using 02D version 1.10.653. To be clear, you have to go to the "RGB Color Preset" screen in the "Tools" menu, as shown in the screenshot I've attached, then edit the color hex for each light. For the life of me I couldn't figure out the on-board keyboard controls.
does anyone knows where to get replacement feet for this ? I accidentally tore 1 of the feetProbably Amazon as the feet are made by 3m
Do you have a link or a product name / code? Mine is being shipped, but I’d be interested in this too.does anyone knows where to get replacement feet for this ? I accidentally tore 1 of the feetProbably Amazon as the feet are made by 3m
what leds should i use for the indicator leds? sorry if silly question
Hello, I'm looking to add lights to the top corner next to the esc key, and the section above the arrows. Can I add any color lights, and what lights are suggested?Any light colors will work as for the type I have used varying types and all have worked so not sure if one is better than the other.
I appreciate any help.
Hello, I'm looking to add lights to the top corner next to the esc key, and the section above the arrows. Can I add any color lights, and what lights are suggested?Any light colors will work as for the type I have used varying types and all have works so not sure if one is better than the other.
I appreciate any help.
Got VIA working with the board along with the lock indicators, but backlight doesn't seem to be working as well as the layer indicators. Anyone else have simillar issues?
Saw that there were issues with indicator LEDS when porting to QMK, but wasn't sure if this stemmed to backlight either. Just wanted to check to see if anyone had similar issues.
Sorry if I've missed them somewhere, but are the plates for this publicly available? I'd like to have an FR4 plate made.
In case anyone is interested, Snow is currently doing an international order run for Orion PCBs and FR4 plates:
https://discord.gg/2HyxNWcWV9
https://forms.gle/ee23aweUB2UFHhCSA
would duck orion v3 qmk work with the v2.5 pcb?it does