Name it. We'll do our best to get it. (v2.0)

[00zeRO]

I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpg
More artisan caps would be cool as well.

ISO items have not done well in times past, so there are no active plans for them.

As for the artisan keycaps, we have a few up for preorder now...

Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.

Find them here in our newly redesigned Incoming Keyboards and Accessories page:

https://mechanicalkeyboards.com/incoming.php

[Lokomotivet]

I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpg
More artisan caps would be cool as well.

ISO items have not done well in times past, so there are no active plans for them.

As for the artisan keycaps, we have a few up for preorder now...

Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.

Find them here in our newly redesigned Incoming Keyboards and Accessories page:

https://mechanicalkeyboards.com/incoming.php

Sorry if I misunderstood this but it links to the same item page(s) where it says that it's out of stock.
Or do you mean that if I make a purchase on one of the incoming items will it be treated as an pre-order?
Last time I bought something that apparently was out of stock on your page, my order was canceled and refunded.

[trees]

I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpg
More artisan caps would be cool as well.

ISO items have not done well in times past, so there are no active plans for them.

As for the artisan keycaps, we have a few up for preorder now...

Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.

Find them here in our newly redesigned Incoming Keyboards and Accessories page:

https://mechanicalkeyboards.com/incoming.php

Sorry if I misunderstood this but it links to the same item page(s) where it says that it's out of stock.
Or do you mean that if I make a purchase on one of the incoming items will it be treated as an pre-order?
Last time I bought something that apparently was out of stock on your page, my order was canceled and refunded.

If its listed as 'incoming' and you order iot i believe its treated as a pre-order. I did this with the Pok3r and some HKP caps before.

[Lokomotivet]

Thanks for the confirmation!

[Flyersfan1]

Will you guys carry the new ducky mouse?

[00zeRO]

Will you guys carry the new ducky mouse?

Definitely maybe

[CommonCurt]

Just noticed that you guys got some FC660C's in stock 

Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?

Also, are the FC660M's you guys have in stock made in Korea, or China?

[bcredbottle]

Ergodox cases that are not $100+, please!

[nickheller]

Purple 60% TEX Aluminum Case! I've been trying to get my hands on one for a while.

We are looking forward to selling out of all other colors. Soon as that happens, you can believe we will restock Purple cases. 

I would pick one of the purple ones up if they came back in stock. I think a purple case would look nice with Hyperfuse.

[bcredbottle]

-

[sethk_]

More

Ergodox cases that are not $100+, please!

then get one custom cut. the files are publicly available

E.g. at?

Living CAD thread

But it would  cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.

I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free,  or the shop time for free, I forget. Let me know and I will do it.

Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.

https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip

I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways

Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/

Sadly no

I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!

So you want ALPs plate in there? I can do that.

[bcredbottle]

More

Ergodox cases that are not $100+, please!

then get one custom cut. the files are publicly available

E.g. at?

Living CAD thread

But it would  cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.

I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free,  or the shop time for free, I forget. Let me know and I will do it.

Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.

https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip

I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways

Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/

Sadly no

I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!

So you want ALPs plate in there? I can do that.

Yes, please! I am forever indebted!

[00zeRO]

More

Ergodox cases that are not $100+, please!

then get one custom cut. the files are publicly available

E.g. at?

Living CAD thread

But it would  cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.

I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free,  or the shop time for free, I forget. Let me know and I will do it.

Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.

https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip

I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways

Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/

Sadly no

I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!

So you want ALPs plate in there? I can do that.

More

Ergodox cases that are not $100+, please!

then get one custom cut. the files are publicly available

E.g. at?

Living CAD thread

But it would  cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.

I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free,  or the shop time for free, I forget. Let me know and I will do it.

Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.

https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip

I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways

Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/

Sadly no

I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!

So you want ALPs plate in there? I can do that.

Yes, please! I am forever indebted!

Could you please carry this conversation into PM's...

[00zeRO]

Just noticed that you guys got some FC660C's in stock 

Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?

Also, are the FC660M's you guys have in stock made in Korea, or China?

We certainly have plans to carry just as much Leopold as we can, and then some...

We seem to carry a mix of Korean, Chinese, and Japanese Leopolds...very cool to see the company array across the Asian market lines.

[ShakeR]

Removed most of the conversation between seth and bcred just as a cleanup.  If I accidentally removed something else, my bad!  I'm rusty.

[Flyersfan1]

Removed most of the conversation between seth and bcred just as a cleanup.  If I accidentally removed something else, my bad!  I'm rusty.

omg, who's this guy?!?!

[sethk_]

Removed most of the conversation between seth and bcred just as a cleanup.  If I accidentally removed something else, my bad!  I'm rusty.

Yeah, sorry about that, I put more tags when I realized how long it was getting, but we aren't able to remove stuff. Thanks!

[CommonCurt]

Just noticed that you guys got some FC660C's in stock 

Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?

Also, are the FC660M's you guys have in stock made in Korea, or China?

We certainly have plans to carry just as much Leopold as we can, and then some...

We seem to carry a mix of Korean, Chinese, and Japanese Leopolds...very cool to see the company array across the Asian market lines.

Sounds good.  If you get some of the white FC750R's that have normal spacebar spacing (the ones that have "FC750RT" printed on the PCB under the spacebar) I will pick one up.
I believe I read that the ones with FC750RT printed under the spacebar were made in Korea, but I'm not sure if that is still the case.

[Chylo]

Any chance for Leopold FC660M with clears anytime soon?

[dante]

KBParadise Facebook says you are going to be receiving some V80MTS this month.  When will the preorder pages go live?

[JoshMK]

Any chance for Leopold FC660M with clears anytime soon?

No ETA.

KBParadise Facebook says you are going to be receiving some V80MTS this month.  When will the preorder pages go live?

Yesterday.  Very limited quantities though. Larger shipment coming in August or September.

[00zeRO]

Removed most of the conversation between seth and bcred just as a cleanup.  If I accidentally removed something else, my bad!  I'm rusty.

omg, who's this guy?!?!

Lol, I know...

[SamFlynn]

Any chance for Leopold FC660M with clears anytime soon?

+1

[dante]

KBParadise Facebook says you are going to be receiving some V80MTS this month.  When will the preorder pages go live?

Yesterday.  Very limited quantities though. Larger shipment coming in August or September.

If someone is nervous about buying the Fukka V80MTS because of scarce supply of replacement switches; would you be able to carry some packs of these as an insurance policy?  Maybe not on this initial shipment as it's probably already in transit but maybe on the next?

[JoshMK]

Any chance for Leopold FC660M with clears anytime soon?

+1

We're ordering as much as possible whenever possible. Waiting to hear back from Leopold regarding additional models.

KBParadise Facebook says you are going to be receiving some V80MTS this month.  When will the preorder pages go live?

Yesterday.  Very limited quantities though. Larger shipment coming in August or September.

If someone is nervous about buying the Fukka V80MTS because of scarce supply of replacement switches; would you be able to carry some packs of these as an insurance policy?  Maybe not on this initial shipment as it's probably already in transit but maybe on the next?

We have thousands of Fukka switches.

[dante]

We have thousands of Fukka switches.

I'm confused; are these yet to be put on the site or are they identical to the listed TaoHao Clicky?  If the latter is true you might want to put TaoHao/Fukka in the name.

[JoshMK]

Fukka = Taihao = Fuhua = FellyDu = ?

The only official name (at this moment, that I'm aware of) is TaiHao.

[dante]

Fukka = Taihao = Fuhua = FellyDu = ?

The only official name (at this moment, that I'm aware of) is TaiHao.

As long as they're identical to what is in the V80MTS Fukka/Fuhua version that's all that matters. 

[CommonCurt]

Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website.  I used them all the time.

If they're there, and I just don't see it then I apologize.

[trees]

Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website.  I used them all the time.

If they're there, and I just don't see it then I apologize.

https://mechanicalkeyboards.com/incoming.php

https://mechanicalkeyboards.com/arrived.php

[CommonCurt]

Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website.  I used them all the time.

If they're there, and I just don't see it then I apologize.

https://mechanicalkeyboards.com/incoming.php

https://mechanicalkeyboards.com/arrived.php

Ah, I see what my issue was.  I had https://mechanicalkeyboards.com/shop/ bookedmarked (which they changed), and then when I clicked "Home" it takes me to the new homepage.

[Jokrik]

Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website.  I used them all the time.

If they're there, and I just don't see it then I apologize.

https://mechanicalkeyboards.com/incoming.php

https://mechanicalkeyboards.com/arrived.php

Ah, I see what my issue was.  I had https://mechanicalkeyboards.com/shop/ bookedmarked (which they changed), and then when I clicked "Home" it takes me to the new homepage.

I tried to avoid that page,
It wallet-hack me so much T_T

especially that incoming ergo pro (mac)

[ATXTider]

When do you guys expect some more Black or Smoke KUL clears?

[00zeRO]

When do you guys expect some more Black or Smoke KUL clears?

We currently have a few of the Smokes available in stock. As for the Black version, we are not sure when we will be restocking them. We certainly hope it will be within a month or so.

[UsualSuspectXXX]

Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!

[00zeRO]

Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!

As long as the rest of our stock continues to sell well, we will restock them sooner rather than later.

[UsualSuspectXXX]

Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!

As long as the rest of our stock continues to sell well, we will restock them sooner rather than later.

This is great news! Thanks for your reply.

[Danboard]

Any chance of restocking brown switches soon?

[00zeRO]

Any chance of restocking brown switches soon?

December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?

[CommonCurt]

Any chance of restocking brown switches soon?

December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?

[00zeRO]

Any chance of restocking brown switches soon?

December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?

Show Image

Pipe down, you!  :p Everyone knows you don't like Browns, CC...

[Ryukuxyz]

Will you ever be restocking the Ducky Shine 3, particularly the MX Brown/blue LED model?

[JoshMK]

Will you ever be restocking the Ducky Shine 3, particularly the MX Brown/blue LED model?

Ducky has since released the Shine 4. The Shine 5 should be out later this year. It's hard to imagine Ducky reproducing an older model.

[CommonCurt]

Do you think you guys will ever stock some non low profile aluminum 60% cases?

[00zeRO]

Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

[CommonCurt]

Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

[00zeRO]

Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

Do you know of any aluminum cases with this higher profile?

[CommonCurt]

Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

Do you know of any aluminum cases with this higher profile?

The FMJ cases that Feng did a group buy for a while ago.

I will post some links to others when I get to my desktop later.

[CommonCurt]

Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

Do you know of any aluminum cases with this higher profile?

This is what I'm talking about.
Here is a example of a low profile TEX case next to a normal height MKC case.  See how the MKC case hides the switch housings?

TEX 60% vs MKC 60% by Compact Keyboards, on Flickr

More non low profile case examples. These particular cases were from group buys.

Hammer & Duck Poker Pitch Comparision by Compact Keyboards, on Flickr


This is one that was sold on Massdrop.

[UsualSuspectXXX]

Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

Do you know of any aluminum cases with this higher profile?

This is what I'm talking about.
Here is a example of a low profile TEX case next to a normal height MKC case.  See how the MKC case hides the switch housings?

Show Image

TEX 60% vs MKC 60% by Compact Keyboards, on Flickr

More non low profile case examples. These particular cases were from group buys.

Show Image

Hammer & Duck Poker Pitch Comparision by Compact Keyboards, on Flickr


This is one that was sold on Massdrop.

Show Image

Man, those are some nice looking cases right there!