Author Topic: [Order] TX60/TX65/TX84se [Finished]  (Read 239585 times)

0 Members and 1 Guest are viewing this topic.

Offline Snappo

  • Posts: 47
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #450 on: Thu, 19 April 2018, 17:05:59 »
Sorry. I was busy for a few days.


No worries. Just checking its still active. :thumb:

Offline long_qt_pie

  • Posts: 107
Re: [Order] TX60/TX65/TX84se
« Reply #451 on: Fri, 20 April 2018, 01:40:50 »
Really looking forward to antique finish and white; will they be announced here or a new thread?
Jetfire | Mech 27 v1 | Mira SE | Singa | Orion 2.5 | Eo87 | Lubrigante | MGA | IBM F XT | AEKII | Lightpad | Exent | Dolphin Rev 2 | F1-8x | Mr Suit

Offline Bricksu

  • Posts: 3
Re: [Order] TX60/TX65/TX84se
« Reply #452 on: Fri, 20 April 2018, 16:17:08 »
Kin, I sent you an email! Hoping I get an invoice soon  :D

Offline Snappo

  • Posts: 47
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #453 on: Fri, 20 April 2018, 17:57:02 »
Kin, I sent you an email! Hoping I get an invoice soon  :D


You will receive it when he checks them in the next few days. He is busy but he will respond. There is no rush. That much I have learnt.

« Last Edit: Sat, 21 April 2018, 07:02:38 by Snappo »

Offline DanielT

  • * Exquisite Elder
  • Posts: 1252
Re: [Order] TX60/TX65/TX84se
« Reply #454 on: Sat, 21 April 2018, 03:48:59 »
For anyone interested, the FINGER60 PCB works also with TMK. I will make a guide soon, there are some things related to RGB control that I have to figure out, but so far everything works really nice on TMK. In theory also the 65% PCB should work, in my guide I will put details on how the map the matrix and figure out everything.
Semnătura lu’ pește prăjit ....

Offline nug

  • Posts: 86
Re: [Order] TX60/TX65/TX84se
« Reply #455 on: Sat, 21 April 2018, 04:29:32 »
For anyone interested, the FINGER60 PCB works also with TMK. I will make a guide soon, there are some things related to RGB control that I have to figure out, but so far everything works really nice on TMK. In theory also the 65% PCB should work, in my guide I will put details on how the map the matrix and figure out everything.

Thanks, that'll be helpful and I think a useful start to port it to QMK.

Offline merlin64

  • Posts: 1273
  • Location: Seattle, WA
    • MechMerlin
Re: [Order] TX60/TX65/TX84se
« Reply #456 on: Sat, 21 April 2018, 21:42:36 »
For anyone interested, the FINGER60 PCB works also with TMK. I will make a guide soon, there are some things related to RGB control that I have to figure out, but so far everything works really nice on TMK. In theory also the 65% PCB should work, in my guide I will put details on how the map the matrix and figure out everything.

IMO, there's no reason to port the Finger60 to QMK as there are plenty of QMK powered 60s currently. If you're going to port it, I would target the 65 or any of the other non standard boards.

Offline kekstee

  • Posts: 314
Re: [Order] TX60/TX65/TX84se
« Reply #457 on: Mon, 23 April 2018, 17:02:13 »
194474-0
Got to build it a week ago.

I don't think the Finger will benefit very much from being ported to QMK over TMK. The led functions rely on an i2c protocol and helper chip, so you're on your own for setting up light effects anyway, it seems. Not the QMK standard.
Here's the key mapping for the 60, based on xauser's work on other L3s.
https://github.com/kekstee/tmk_keyboard/commit/9785496d49f7b1a4449affd0f1482d088e79a5c2

Offline midnight2903

  • Posts: 344
  • Location: Singapore
Re: [Order] TX60/TX65/TX84se
« Reply #458 on: Mon, 23 April 2018, 18:16:34 »
(Attachment Link)
Got to build it a week ago.

I don't think the Finger will benefit very much from being ported to QMK over TMK. The led functions rely on an i2c protocol and helper chip, so you're on your own for setting up light effects anyway, it seems. Not the QMK standard.
Here's the key mapping for the 60, based on xauser's work on other L3s.
https://github.com/kekstee/tmk_keyboard/commit/9785496d49f7b1a4449affd0f1482d088e79a5c2

Goddamn thats clean. Makes me wanna build a black board with brass plate and MX blacks.

Offline regionfree

  • Posts: 319
  • Location: Sa kagubatan
Re: [Order] TX60/TX65/TX84se
« Reply #459 on: Tue, 24 April 2018, 00:26:50 »
Got shipping notifications from kin today, he seems to be very busy, yet I kept bugging him :D

Offline Tonkatonk

  • Posts: 113
Re: [Order] TX60/TX65/TX84se
« Reply #460 on: Wed, 25 April 2018, 17:59:16 »
Hi Kin, I sent a request for a TX60 if unavailable could you kindly let me know what is? When you get to it of course.

Thanks for the great  creation!!


Noxary PC268.2 | Red Nunu | Purple PC Nunu | Ogre | Vulcan Pro

Offline yonghf

  • Posts: 130
  • Location: Singapore
Re: [Order] TX60/TX65/TX84se
« Reply #461 on: Sun, 29 April 2018, 07:03:02 »
I've checked it's not there - I only see the stabs, films and LEDs which I ordered.

sorry, I will send them on Monday.

Thanks Kin I really appreciate you sending the screws/bump-ons!

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Order] TX60/TX65/TX84se
« Reply #462 on: Wed, 09 May 2018, 14:56:23 »
If you guys need to buy TX60/84 PCBs, we have many in stock: For US customer | For International customer
« Last Edit: Fri, 18 May 2018, 15:52:45 by popkorn62 »
==============
https://mekibo.com/

Offline droideggs

  • Posts: 21
Re: [Order] TX60/TX65/TX84se
« Reply #463 on: Sun, 13 May 2018, 22:42:55 »
is this still active? just put in a purchase request for the tx84se.

i know Kin is busy but just throwing it out there. keyboard looks beautiful

Offline eyedrop

  • Posts: 601
  • Location: Keeb Abyss
Re: [Order] TX60/TX65/TX84se
« Reply #464 on: Sun, 13 May 2018, 23:10:19 »
is this still active? just put in a purchase request for the tx84se.

i know Kin is busy but just throwing it out there. keyboard looks beautiful

Did you email Kin about placing an order?

TX84se are sold out I believe.

Offline droideggs

  • Posts: 21
Re: [Order] TX60/TX65/TX84se
« Reply #465 on: Mon, 14 May 2018, 00:47:10 »
is this still active? just put in a purchase request for the tx84se.

i know Kin is busy but just throwing it out there. keyboard looks beautiful

Did you email Kin about placing an order?

TX84se are sold out I believe.

ah i see. yeah just reread original post and it looks only Blue TX60 is available. I sent him a PM via geekhack. Hopefully it gets sent to his email?

Offline nug

  • Posts: 86
Re: [Order] TX60/TX65/TX84se
« Reply #466 on: Mon, 14 May 2018, 00:53:44 »
ah i see. yeah just reread original post and it looks only Blue TX60 is available. I sent him a PM via geekhack. Hopefully it gets sent to his email?

I think you misunderstood the original post. Blue was only available for TX60, not for TX65 or TX84. TX84 is sold out but TX60/65 may still be available in various colors.
If you send him an email with your request he will reply and let you know if the colour you ordered is available or not.

PLZ send email to me, if you want to buy extras.
225ozzy@naver.com
« Last Edit: Mon, 14 May 2018, 00:55:45 by nug »

Offline droideggs

  • Posts: 21
Re: [Order] TX60/TX65/TX84se
« Reply #467 on: Mon, 14 May 2018, 01:03:18 »
ah i see. yeah just reread original post and it looks only Blue TX60 is available. I sent him a PM via geekhack. Hopefully it gets sent to his email?

I think you misunderstood the original post. Blue was only available for TX60, not for TX65 or TX84. TX84 is sold out but TX60/65 may still be available in various colors.
If you send him an email with your request he will reply and let you know if the colour you ordered is available or not.

PLZ send email to me, if you want to buy extras.
225ozzy@naver.com

reading comprehension fail. i will message him directly from the email you gave. appreciate the prompt response and clarification.

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #468 on: Mon, 14 May 2018, 07:05:35 »
There are some extra tx84se gold, red, green.
If you want to buy, plz send email to me.

Offline Kerasan

  • Posts: 379
  • Location: Italy
Re: [Order] TX60/TX65/TX84se
« Reply #469 on: Mon, 14 May 2018, 07:25:43 »
There are some extra tx84se gold, red, green.
If you want to buy, plz send email to me.

hi Kin,

do you have any photos of the green?

KMK Labs.

Offline ChrisSwires

  • Posts: 150
Re: [Order] TX60/TX65/TX84se
« Reply #470 on: Mon, 14 May 2018, 08:47:47 »
Hey Kin

Any update on the Antique 65 timeline? (Tying this on my champagne gold tx60).

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1173
  • Location: Indiana, USA
Re: [Order] TX60/TX65/TX84se
« Reply #471 on: Mon, 14 May 2018, 08:58:22 »


My silver TX60.
Retooled cherry mx blacks
68g Korean springs
Polycarbonate switch films
Tribosys 3204 g0 lube

Is very nice.  :thumb:
keyboards.

Offline foxmancore

  • Posts: 77
  • Location: Tokyo
Re: [Order] TX60/TX65/TX84se
« Reply #472 on: Mon, 14 May 2018, 09:26:39 »
So tempted to pick this up, but the Noxary 280 is probably going live soon...  :-\

Offline lunr

  • Posts: 220
  • Location: Canada
Re: [Order] TX60/TX65/TX84se
« Reply #473 on: Tue, 15 May 2018, 22:13:13 »
Wonder if anyone have any issues with JigOn and layers? The layers are getting stuck and I have to go into the program to revert back to the default layer. eg. Everytime I press FN (layer 1), it gets stuck to layer 1 and doesn't revert back to layer 0 which is my default layer.

Offline nug

  • Posts: 86
Re: [Order] TX60/TX65/TX84se
« Reply #474 on: Tue, 15 May 2018, 22:28:33 »
Wonder if anyone have any issues with JigOn and layers? The layers are getting stuck and I have to go into the program to revert back to the default layer. eg. Everytime I press FN (layer 1), it gets stuck to layer 1 and doesn't revert back to layer 0 which is my default layer.

Are you sure it's not toggling the function layer? If it is, you'll need to make sure you have a key binded on layer 1 to toggle back to the default layer.

Offline lanyusea

  • Posts: 334
Re: [Order] TX60/TX65/TX84se
« Reply #475 on: Tue, 15 May 2018, 23:15:36 »
Wonder if anyone have any issues with JigOn and layers? The layers are getting stuck and I have to go into the program to revert back to the default layer. eg. Everytime I press FN (layer 1), it gets stuck to layer 1 and doesn't revert back to layer 0 which is my default layer.

as I remember, you need to map the key to Fn, not Fn-layer1
HHKB Type-s / 4x KMAC Happy / 3x Duck Viper v1 / 2x Duck Viper v2 / 4x Duck Viper Duck TCV3 / Red Scarf 77 / 2x Infinity 60 / 2x ALF HHKB / LZ-CE / FJELL / Canoe / Canoe PC / Canoe FE / ARES Prototype / 2x Ares / LC-CLSh / TX60 / YODA2 / E6-V2 / E6-V2 FE / CAMP LC60 / 2x EM 7 / 4x Leaf 60 / UHK / Project F / Polaris / 4x Duck Viper v3 / TX60 v2 / Thermal / Matrix Falcon / TX60 v3 / 2x TMO50 / 2x Dolice / Dolphin 65 / Dolphin 60 / Plenty of keycaps

Offline lunr

  • Posts: 220
  • Location: Canada
Re: [Order] TX60/TX65/TX84se
« Reply #476 on: Tue, 15 May 2018, 23:29:11 »
Wonder if anyone have any issues with JigOn and layers? The layers are getting stuck and I have to go into the program to revert back to the default layer. eg. Everytime I press FN (layer 1), it gets stuck to layer 1 and doesn't revert back to layer 0 which is my default layer.

as I remember, you need to map the key to Fn, not Fn-layer1

thanks. been a while since i touched jigon.

Offline lanyusea

  • Posts: 334
Re: [Order] TX60/TX65/TX84se
« Reply #477 on: Tue, 15 May 2018, 23:55:29 »
Wonder if anyone have any issues with JigOn and layers? The layers are getting stuck and I have to go into the program to revert back to the default layer. eg. Everytime I press FN (layer 1), it gets stuck to layer 1 and doesn't revert back to layer 0 which is my default layer.

as I remember, you need to map the key to Fn, not Fn-layer1

thanks. been a while since i touched jigon.

one more thing I don't like JigOn is that I cannot map two Fn keys in one layer...
HHKB Type-s / 4x KMAC Happy / 3x Duck Viper v1 / 2x Duck Viper v2 / 4x Duck Viper Duck TCV3 / Red Scarf 77 / 2x Infinity 60 / 2x ALF HHKB / LZ-CE / FJELL / Canoe / Canoe PC / Canoe FE / ARES Prototype / 2x Ares / LC-CLSh / TX60 / YODA2 / E6-V2 / E6-V2 FE / CAMP LC60 / 2x EM 7 / 4x Leaf 60 / UHK / Project F / Polaris / 4x Duck Viper v3 / TX60 v2 / Thermal / Matrix Falcon / TX60 v3 / 2x TMO50 / 2x Dolice / Dolphin 65 / Dolphin 60 / Plenty of keycaps

Offline tiydal

  • Posts: 58
  • Location: UK
Re: [Order] TX60/TX65/TX84se
« Reply #478 on: Thu, 17 May 2018, 07:11:38 »
Mine came in a few days ago, haven't built it yet.

It looks and feels lovely.

Offline jlee755

  • Posts: 61
  • Location: Atlanta, GA
Re: [Order] TX60/TX65/TX84se
« Reply #479 on: Fri, 18 May 2018, 18:24:32 »
Hoooo boyyy it's arrived!!! The red is BEAUTIFUL. I'm too scared to build in it...

Thank you very much!

Offline plexabyte

  • Posts: 8
Re: [Order] TX60/TX65/TX84se
« Reply #480 on: Mon, 21 May 2018, 16:49:55 »
Got mine a while ago, finally got around to building it. Here's a tree pic since those are in right now.


Offline Genn

  • Posts: 23
Re: [Order] TX60/TX65/TX84se
« Reply #481 on: Wed, 23 May 2018, 16:19:09 »
Is there any chance for a new batch of Titan Grey 84s?

Offline mdlt97

  • Posts: 104
  • Location: Toronto
  • This **** is still better than Keebtalk
Re: [Order] TX60/TX65/TX84se
« Reply #482 on: Fri, 25 May 2018, 22:17:00 »
Hoooo boyyy it's arrived!!! The red is BEAUTIFUL. I'm too scared to build in it...

Thank you very much!
Show Image
Show Image
Show Image
Show Image



yoooooooooooooooooo wtf how did you get red???????????


that wasnt an option
TX60 | Duck TC-V3 | Duck Eagle V2 1/1 Bottom | Zephyr r2 | Duck Sidewinder | Mech27v2 | TX75 | LZ CLS | Duck Viper v2 | Orion v3 | HHKB pro 1 | TGR 910 | Omega60

Offline jlee755

  • Posts: 61
  • Location: Atlanta, GA
Re: [Order] TX60/TX65/TX84se
« Reply #483 on: Sat, 26 May 2018, 21:43:29 »
Hoooo boyyy it's arrived!!! The red is BEAUTIFUL. I'm too scared to build in it...

Thank you very much!
Show Image
Show Image
Show Image
Show Image



yoooooooooooooooooo wtf how did you get red???????????


that wasnt an option
Ask kin25! I asked him if he had any stock available and he told me about this one.

Offline nug

  • Posts: 86
Re: [Order] TX60/TX65/TX84se
« Reply #484 on: Mon, 28 May 2018, 07:11:00 »
I've managed to get TMK working on the Finger65 PCB thanks to whoever uploaded the Finger 60 version (kekstee?) :). Now the next step is QMK....

Offline Mag_Flux

  • Posts: 26
Re: [Order] TX60/TX65/TX84se
« Reply #485 on: Mon, 28 May 2018, 08:21:16 »
I've managed to get TMK working on the Finger65 PCB thanks to whoever uploaded the Finger 60 version (kekstee?) :). Now the next step is QMK....

That's awesome, glad to hear! Do you have any plans to share your work on something like Github, it would be appreciated. :D

Offline nug

  • Posts: 86
Re: [Order] TX60/TX65/TX84se
« Reply #486 on: Mon, 28 May 2018, 09:29:14 »
Yeah, I'll probably create a fork from xauser and then upload my code. Just got to figure out how to do it

Offline SolidCactus

  • Posts: 274
  • Location: UK
Re: [Order] TX60/TX65/TX84se
« Reply #487 on: Mon, 28 May 2018, 09:41:29 »
Wow awesome! Many thanks for your hard work so far! Would love to have TMK/QMK for this board.

Offline nug

  • Posts: 86
Re: [Order] TX60/TX65/TX84se
« Reply #488 on: Tue, 29 May 2018, 04:49:46 »
I tested the layout one final time and all the keys appear to be working. I've put in a pull request on git so the code/files you need can be found there.

QMK I think will be a bit more tricky so if anyone wants to help out I'll appreciate it :)

Offline nothingzzz

  • Posts: 18
Re: [Order] TX60/TX65/TX84se
« Reply #489 on: Wed, 30 May 2018, 05:16:16 »
I have sent you an email kin25, please check it :)).

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #490 on: Wed, 30 May 2018, 11:27:51 »
what switches have you guys decided to use on these boards?  I'm still on the fence and haven't built mine yet.

Offline jobicoppola

  • Posts: 22
  • Location: Charlotte
Re: [Order] TX60/TX65/TX84se
« Reply #491 on: Wed, 30 May 2018, 11:50:21 »
i just ordered some kailh box blacks for mine.  i have some jades also but i think i want smooth instead of clicky for this board.

Offline Perfex

  • Posts: 124
  • Location: MN
Re: [Order] TX60/TX65/TX84se
« Reply #492 on: Wed, 30 May 2018, 13:37:10 »
what switches have you guys decided to use on these boards?  I'm still on the fence and haven't built mine yet.


I'm quite enjoying tealios in mine thus far

Offline Captainbuttmonkey

  • Posts: 319
  • Location: UK
Re: [Order] TX60/TX65/TX84se
« Reply #493 on: Thu, 31 May 2018, 19:21:44 »
Just checking in to see if there is any news on the antique versions, no worries if not  :thumb:

Offline Perfex

  • Posts: 124
  • Location: MN
Re: [Order] TX60/TX65/TX84se
« Reply #494 on: Thu, 31 May 2018, 19:39:32 »
Just checking in to see if there is any news on the antique versions, no worries if not  :thumb:


He made a blog post regarding them a couple weeks ago.

Offline long_qt_pie

  • Posts: 107
Re: [Order] TX60/TX65/TX84se
« Reply #495 on: Thu, 31 May 2018, 20:05:00 »
Pardon the google translate but this is the blog post:

Many people wait for white and antique post processing, sorry for being late.

First, let me tell you about white.
Personally I like the white paint housing.
Coating an alu is not good in terms of cost, quality, and durability.
(It's pretty, it's what I like)

I spent six months looking for different paint shops and making several samples, but the time lag was getting satisfactory quality.
In the end, the surface quality and strength of the factory came to a certain degree of quality was determined.


In the case of antistatic post-treatment, we double-coated the hair line and applied the surface coating.
Small factory is bad quality, big factories in small factories such as keyboards, small quantities and high quality requirements are high, the product is reluctant.
He also says that he will not be annoyed even if he tries to make an assessment and raise the price.
I have tribute to my boss, meals, and good looks to the manager.
It's not about production, it's about sales.
When making a small sample of handmade samples, even if it works well, it causes a problem when it is done by mass automatic operation, and if a dispatching employee waits all day and there is a gap, it will be used to make a sample by just one ejaculation.

It was not easy to make a hair line with a six-joint robot.
I need to peel it off with a scrubber or something like it, but it comes out unevenly due to the elasticity of the scrubber, and it gives an uneven appearance even if the pressure is slightly different.

Over the course of a few months, this post-treatment has taken many hours and more than 20 samples.

At present, I am satisfied with 70% of my standards. (My standard is high.)

It seems like most buyers are satisfied, except for those who are hard-pressed.

We will make a sample in 2 weeks and conduct a demand survey.
It seems that a period of about one month is needed after the demand survey.

I have heard many times that I have to give up on this and regrets that I would have to say that I saw the failed sample.
I've been working hard since I've started it all, and I have done my best to finish it anyway.

It's just a simple keyboard, but I hope you'll find out that it's a lot of effort.
Jetfire | Mech 27 v1 | Mira SE | Singa | Orion 2.5 | Eo87 | Lubrigante | MGA | IBM F XT | AEKII | Lightpad | Exent | Dolphin Rev 2 | F1-8x | Mr Suit

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #496 on: Thu, 31 May 2018, 20:56:11 »
Makes a lot of sense.  That finish is amazing and a nightmare to get right, i'm sure.  This is something that would honestly be done best by an artist.  I admire Kin's determination to find a way to automate it. 

Offline Captainbuttmonkey

  • Posts: 319
  • Location: UK
Re: [Order] TX60/TX65/TX84se
« Reply #497 on: Fri, 01 June 2018, 16:41:44 »
Just checking in to see if there is any news on the antique versions, no worries if not  :thumb:


He made a blog post regarding them a couple weeks ago.

Pardon the google translate but this is the blog post:

Many people wait for white and antique post processing, sorry for being late.

First, let me tell you about white.
Personally I like the white paint housing.
Coating an alu is not good in terms of cost, quality, and durability.
(It's pretty, it's what I like)

I spent six months looking for different paint shops and making several samples, but the time lag was getting satisfactory quality.
In the end, the surface quality and strength of the factory came to a certain degree of quality was determined.


In the case of antistatic post-treatment, we double-coated the hair line and applied the surface coating.
Small factory is bad quality, big factories in small factories such as keyboards, small quantities and high quality requirements are high, the product is reluctant.
He also says that he will not be annoyed even if he tries to make an assessment and raise the price.
I have tribute to my boss, meals, and good looks to the manager.
It's not about production, it's about sales.
When making a small sample of handmade samples, even if it works well, it causes a problem when it is done by mass automatic operation, and if a dispatching employee waits all day and there is a gap, it will be used to make a sample by just one ejaculation.

It was not easy to make a hair line with a six-joint robot.
I need to peel it off with a scrubber or something like it, but it comes out unevenly due to the elasticity of the scrubber, and it gives an uneven appearance even if the pressure is slightly different.

Over the course of a few months, this post-treatment has taken many hours and more than 20 samples.

At present, I am satisfied with 70% of my standards. (My standard is high.)

It seems like most buyers are satisfied, except for those who are hard-pressed.

We will make a sample in 2 weeks and conduct a demand survey.
It seems that a period of about one month is needed after the demand survey.

I have heard many times that I have to give up on this and regrets that I would have to say that I saw the failed sample.
I've been working hard since I've started it all, and I have done my best to finish it anyway.

It's just a simple keyboard, but I hope you'll find out that it's a lot of effort.

Ah thanks for this, whilst some of it was clearly lost in (google) translation, I think I get the overall message =]. Some really nice photos just posted 11 hours ago funnily enough.

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1173
  • Location: Indiana, USA
Re: [Order] TX60/TX65/TX84se
« Reply #498 on: Sat, 02 June 2018, 00:45:35 »
can anyone help. I got TMK working on my finger60, but my backlighting is on and I can't figure out how to turn it off. 
keyboards.

Offline mr scooty

  • Posts: 118
Re: [Order] TX60/TX65/TX84se
« Reply #499 on: Sat, 02 June 2018, 17:25:13 »
are orders still being accepted for this??