Those bezels definitely give it a beefier look without being too in your face. Gives me the old simple yet rugged look really like it. :thumb:
I am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
I am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
Never seen him before, but with a 4 month production time, if anything goes awry you'll have plenty of time on paypal protection.
I'll ask my Korean friends.
I am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
Hello IBM, nice work! Does it come with the IBM logo? :pI am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
Hello IBM, nice work! Does it come with the IBM logo? :pI am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
Yeah, from speaking to my friends on KBDlab, this guy is fairly reputable.
Hello IBM, nice work! Does it come with the IBM logo? :pI am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
고마워 dubious !! thankyou ~!!
if i support a sticker, Is there any license problem?Hello IBM, nice work! Does it come with the IBM logo? :pI am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
first, This groupbuy is will be supported by the VE.A team.
second, This CP was completed with the advice of duck0113.
this be manufactured by the same factory as VE.A
Will this kit use the existing Leeku L3 CP PCB or is this a new Leeku PCB design?
Are TX bags included in the price or is the an additional charge for them?
Great to see so many big names of the Korean community working together!
The price is stated as for a MOQ of 30, does that mean there will be only 30 spots or, alternatively, that the price could be lower if there is a larger number ordered?
Sent from my iPad using Tapatalk
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
About a week to go. A few more pics (side shots) here: http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=4&document_srl=4781105 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=4&document_srl=4781105)
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
Actually I am very interested in what this keyset is in the sample picture, looks very nice
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
I'm going to google Poll.
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
I'm going to google Poll.
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
Only 30 units will be produced? Damn, I knew it was too good ... with my luck I'll never own one :(
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
I'm going to google Poll.
Please, meet the demand. Are going to do it?
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
unbuilt pictures.
MOQ is 30 in total for korea + GH
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
unbuilt pictures.
MOQ is in total for korea + GH
I hope more than 30
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
unbuilt pictures.
MOQ is in total for korea + GH
I hope more than 30
These images are making me very excited.
Are you going to post images of what the different colored cases are going to look like?
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
Oh so your saying your taking as many orders as possible?
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
Oh so your saying your taking as many orders as possible?
Yub. !
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
Oh so your saying your taking as many orders as possible?
Yub. !
The price is stated as for a MOQ of 30, does that mean there will be only 30 spots or, alternatively, that the price could be lower if there is a larger number ordered?
Sent from my iPad using Tapatalk
The price is stated as for a MOQ of 30, does that mean there will be only 30 spots or, alternatively, that the price could be lower if there is a larger number ordered?
Sent from my iPad using Tapatalk
If you preorder during the IC phase (e.g. by posting " Order quantity: 1 Color: Black 1") the cost is $400. Group buy price is $420.
The first 30 orders get the TX bag included in the preorder/group buy price.
After the first 30 orders, you can buy a TX bag for $25. However, the order for the TX bags are still being worked on, and if they can't be purchased you will be refunded $25
I'm in too.
Order quantity : 1
Color: Black
I'm in too.
Order quantity : 1
Color: Black
Damn Amnesia, it seems like your in all of the group buys haha.
I gotta see a pic of your collection some day!
Black or titan gray keyboard with a GMK Dolch set, any suggestions?
Black or titan gray keyboard with a GMK Dolch set, any suggestions?
Dolch looks good on any color imo. Titan gray would look amazing though.
You're an amazing friend! Hope he appreciates it!
You're an amazing friend! Hope he appreciates it!
Do you think Black or Grey would go better with Carbon anyway? I didn't really think about it, I just normally always prefer black, but if its not for me lol.
You're an amazing friend! Hope he appreciates it!
Do you think Black or Grey would go better with Carbon anyway? I didn't really think about it, I just normally always prefer black, but if its not for me lol.
Anything grey-based will look better on a grey case. Skidata,terminal,carbon,dolch.
Set with deep colors, such as nautilus, laser, skeletor etc will look better on a black.
But overall grey is more versatile. Beige kits go well on grey but not so much on black.
You're an amazing friend! Hope he appreciates it!
Do you think Black or Grey would go better with Carbon anyway? I didn't really think about it, I just normally always prefer black, but if its not for me lol.
Anything grey-based will look better on a grey case. Skidata,terminal,carbon,dolch.
Set with deep colors, such as nautilus, laser, skeletor etc will look better on a black.
But overall grey is more versatile. Beige kits go well on grey but not so much on black.
I agree with avid. Definitely go with grey for carbon.
I was debating Grey or black as well as I was going to put ocean dolch on it. But settled with black just for the fact that I’m hoping to get a grey tx cp and also because I have seen ocean dolch on black boards and it looks pretty good to me.
TX bag is $25? In my understanding, TX bag is $30. If you have some base about this price, please let me know. I don't understand this price. I think that $30 for this bag is very low price.The price is stated as for a MOQ of 30, does that mean there will be only 30 spots or, alternatively, that the price could be lower if there is a larger number ordered?
Sent from my iPad using Tapatalk
yayaya 30+ spots
If you preorder during the IC phase (e.g. by posting " Order quantity: 1 Color: Black 1") the cost is $400. Group buy price is $420.
The first 30 orders get the TX bag included in the preorder/group buy price.
After the first 30 orders, you can buy a TX bag for $25. However, the order for the TX bags are still being worked on, and if they can't be purchased you will be refunded $25
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
Will ISO be supported? I see there is no cutout in your plate, but not sure if thats final version.
One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Arrgh, no weight plate? :'(
Or is that only for the prototype?
One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Arrgh, no weight plate? :'(
Or is that only for the prototype?
I think he's saying he's gonna do it like duck, where you can add a weight later.
Yeh ~!!!Congratulations!
Achieved 20 !!
Thx. Everyone.
Yeh ~!!!Congratulations!
Achieved 20 !!
Thx. Everyone.
Can't wait to get this!
Arrgh, no weight plate? :'(One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Or is that only for the prototype?
I think he's saying he's gonna do it like duck, where you can add a weight later.
that's right !!
Arrgh, no weight plate? :'(One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Or is that only for the prototype?
I think he's saying he's gonna do it like duck, where you can add a weight later.
that's right !!
Thanks. Will you run a mini group buy for these wooden "weight" plates too?
Paypal account created success.
Google Poll creating...
I'm in.Order quantity: 1Color: TitanGray Silver
Invoices?
Sorry for the tardiness, am I still able to join?
Just a few question before I submit my form, do we need to state anywhere if we've preordered? Also, what is complex colours and when are invoices going to be due?
Just a few question before I submit my form, do we need to state anywhere if we've preordered? Also, what is complex colours and when are invoices going to be due?
PreOrder will end on November 30th.
However, I will give more opportunities to those who have join comment until November 30th.
complex colours is about "MIX"
for example, top black, bottom silver.
invoices due Date is 2018-04-01 (expect)
I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?
I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?
I already to explain this in main description. :)
PreOrder (~11/30) = $ 375 (Top / Bottom / Plate / PCB / Shipping)
GroupBuy (12/01~) = $ 395 (Top / Bottom / Plate / PCB / Shipping)
I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?
I already to explain this in main description. :)
PreOrder (~11/30) = $ 375 (Top / Bottom / Plate / PCB / Shipping)
GroupBuy (12/01~) = $ 395 (Top / Bottom / Plate / PCB / Shipping)
He’s confused because with most GB, after filling out the form, the GB Runner usually sends invoices for the order and that is what people pay.
It’s not normally just a link.
Housing Top / Plate / PCB / Housing Bottom) + Shipping Estimate
What do you mean by more complex colors?
We can request custom colors?
Paypal account created success.
Google Poll creating...
In! Waiting for the invoice too :thumb:Paypal account created success.
Google Poll creating...
Have you made sure that PayPal won't freeze your account during this group buy?
Doesn’t Paypal put the money on hold either way after a certain amount of time and no proof of shipment is provided?I don't know that paypal will hold or not, but my opinion is
Especially for a new account this might most likely happen either way.
I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?
I already to explain this in main description. :)
PreOrder (~11/30) = $ 375 (Top / Bottom / Plate / PCB / Shipping)
GroupBuy (12/01~) = $ 395 (Top / Bottom / Plate / PCB / Shipping)
He’s confused because with most GB, after filling out the form, the GB Runner usually sends invoices for the order and that is what people pay.
It’s not normally just a link.
Ah .... ok. isee
I'll prepare an invoice.
sorry... :-X
i missed paypal Fee
:'( :'( :'( :'( :'( :'(
PreOrder 375 + 15 = $390
GrupBuy 395 + 15 = $410
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
sorry... :-X
i missed paypal Fee
:'( :'( :'( :'( :'( :'(
PreOrder 375 + 15 = $390
GrupBuy 395 + 15 = $410
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
Just a few quick questions:
- shipping prices 택배비용 worldwide are included then? I read in the KBDlab post that shipping within Korea is about 5000 KRW, but I realize that shipping internationally is much costlier than that, so I want to make sure all costs are accounted for.
- can you post a picture of all supported layouts? Does this PCB support split backspace? What bottom row layouts?
- how do you program this PCB? Is there a guide?
Thanks!
Sent from my SM-G935T using Tapatalk
Preparing invoice ...
SO Hard !!!!!
ㄴㅁ이ㅏ럼ㄴㅇ;ㅣㅏ러매ㅔㅑ23ㅈ더ㅗ래ㅑㅁ조ㅓㅎ;ㅐㅑㅕㅁ농ㅀ피먼ㅇㄹ휴ㅣㅓ,카ㅡㅌ유ㅜㅊㅍ.ㅏ,터초ㅠ피ㅐㅓㅋ냐ㅛㅇ렂ㅁㄹ !!!
Can you please send invoices for the preorder?
Can you please send invoices for the preorder?
I just sent it. :)
ThankYou.
You're back in now, Omega? I thought you just got a TX-CP. Did you get the TX from kin directly? That's what I wanted actually.
You're back in now, Omega? I thought you just got a TX-CP. Did you get the TX from kin directly? That's what I wanted actually.
Not completey still debating but at this price I may just jump back in haha.
Can you please send invoices for the preorder?
I just sent it. :)
ThankYou.
Will a weight from Kins TXCP fit into this board? or is a different size required?
Just filled out the form but want to change the color, would it be possible for me to get an invoice for a black case instead of silver?
Can you please send invoices for the preorder?
I just sent it. :)
ThankYou.
Will a weight from Kins TXCP fit into this board? or is a different size required?
different size, pretty clear from the pictures
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
Hi PainMaster,
If you update my pre-order invoice, I will pay the additional shipping costs.
This was too good to be true ;D
Hi. ~!
I have an issue in my work yesterday
We are working on it.
The invoice will be reissued in about 7 hours.
I haven't slept for three days.
I'm going to faint...
Ooh, fresh I'd be interested, someone should run a buy for brass plates and weights
Count me in on the brass plate group buy.
(https://i.imgur.com/8luWwen.jpg) (https://geekhack.org/index.php?topic=92644.0)
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
Hi PainMaster,
If you update my pre-order invoice, I will pay the additional shipping costs.
This was too good to be true ;D
Hey mate,
It's free shipping on pre-orders. I suggest anyone who is serious about getting one to pay her/his invoice. It's totally worth it.
Moresorry... :-X
i missed paypal Fee
:'( :'( :'( :'( :'( :'(
PreOrder 375 + 15 = $390
GrupBuy 395 + 15 = $410
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
Just a few quick questions:
- shipping prices 택배비용 worldwide are included then? I read in the KBDlab post that shipping within Korea is about 5000 KRW, but I realize that shipping internationally is much costlier than that, so I want to make sure all costs are accounted for.
- can you post a picture of all supported layouts? Does this PCB support split backspace? What bottom row layouts?
- how do you program this PCB? Is there a guide?
Thanks!
Sent from my SM-G935T using Tapatalk
I'll prepare the support LayOut.
- Bottom Line... WinkeyLess & Winkey available. (show Main Picture please.)
There is a link to the invoice in the preorder google form.
There is a link to the invoice in the preorder google form.
Afaik, the link in the form is incorrect, the price including shipping is supposed to be 450, so don't pay through the link.
There is a link to the invoice in the preorder google form.
Afaik, the link in the form is incorrect, the price including shipping is supposed to be 450, so don't pay through the link.
Hi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47
aznreaper
bminhz
MechanicalElement
Melanic
poolside
papedahut
wholypantalones
Unforgivable
eyedrop
trikoi00
robotsokk
packman86
Hi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
wholypantalones
Hi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47aznreaper
bminhz
MechanicalElement
Melanic
poolside
papedahutwholypantalones
Unforgivableeyedroptrikoi00
robotsokk
packman86
Pm sent, I hope to see what the grey and silver options will look like if possible as well, even anodization samples would be nice
Pm sent, I hope to see what the grey and silver options will look like if possible as well, even anodization samples would be nice
I'm sorry.
The sample is black only.
please refer to the silver or titanium gray.
However, the titanium gray is ' a lot darker ' than VE.A.
as expected
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
as expected
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
Have you posted on reddit?
as expected
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
Have you posted on reddit?
Nope.
Reddit's concept is too difficult for me.
It's hard to understand.
Hi! I'm confused on how to fill up the form! I'd like to join in this though.
Why are there 2 quantity questions to fill out?
What's the address 2 for?
Any renders or color chips for the grey and silver?
Hi! I'm confused on how to fill up the form! I'd like to join in this though.
Why are there 2 quantity questions to fill out?
What's the address 2 for?
Any renders or color chips for the grey and silver?
Thank you! Sent a form!
Addr 1 = Nation & City
Addr 2 (Detail) = Everything Other than "Addr 1"
Gray and silver do not have prepared samples.
please refer to the silver or titanium gray of VE.A
However, the titanium gray is ' a lot darker ' than VE.A.
Hi! I'm confused on how to fill up the form! I'd like to join in this though.
Why are there 2 quantity questions to fill out?
What's the address 2 for?
Any renders or color chips for the grey and silver?
Thank you! Sent a form!
Addr 1 = Nation & City
Addr 2 (Detail) = Everything Other than "Addr 1"
Gray and silver do not have prepared samples.
please refer to the silver or titanium gray of VE.A
However, the titanium gray is ' a lot darker ' than VE.A.
Hi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47
Melanic
papedahut
UnforgivableaznreaperbminhzMechanicalElementpoolsidewholypantaloneseyedroptrikoi00robotsokkpackman86
i posted it to redditGood deal Puddsy
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
i posted it to redditGood deal Puddsy
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
i posted it to redditGood deal Puddsy
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
nobody else did it so
EDIT: haha it got removed
F
i posted it to redditGood deal Puddsy
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
nobody else did it so
EDIT: haha it got removed
F
.....!!!!!
I'm sorry,
I'll register that today.
You mean KMAC 2?
looks good though
You mean KMAC 2?
looks good though
KMAC 1
as expected
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
MoreHi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47
Melanic
papedahut
UnforgivableaznreaperbminhzMechanicalElementpoolsidewholypantaloneseyedroptrikoi00robotsokkpackman86
Hi Friends ~!!
4 Persons More Plz ~!!
.... And
There are One more to the MOQ !!!!
I joined
How's it going? Any news on the GB?
How's it going? Any news on the GB?
introduce GB Schedule.
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
How's it going? Any news on the GB?
introduce GB Schedule.
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
Did we hit the target of 30+ keyboards?
I've been "PreOrder payment" waiting for 7 days, but ... Canceled
because there is no response.
Thank you for your "PO" attention.
I'm assuming those who said they would pre-order, but never followed up
Does that mean there is room for one more pre-order? If so I'll gladly take that spot :)
I've been "PreOrder payment" waiting for 7 days, but ... Canceled
because there is no response.
Thank you for your "PO" attention.
I’m confused. What’s cancelled?
There were 3 people are express to me, "SaiB-CP PreOrder" participation.
I waited for them's (PreOrder) payment, seven days.
but...
GB is continues.
don't warry about it. :)
I want to join but I can't decide on color :(
I want to join but I can't decide on color :(
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Did you upload the photo I didn't see it :-\
What is your favorite color PainMaster? I am excited for your 1st group buy too :thumb:
PainMaster can you please make a spreadsheet of our orders?
Order to Factory Complete !!
Next notification schedule is December 30th.
see you 14 days later~
Please, post a spreadsheet with our orders when you have time?
Thanks mate. Merry Christmas and Happy New Year.
Thanks mate. Merry Christmas and Happy New Year.
Merry Christmas & Happy New Year. :)
Thanks mate. Merry Christmas and Happy New Year.
Merry Christmas & Happy New Year. :)
You too :D.
Also, any chance we can get the plate design to try and use with https://geekhack.org/index.php?topic=91995.0
I'm not sure if it will work or not since I imagine with this case design plate thickness is super critical, but I <3 brass plates, so might as well try.
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Any color samples yet? I ordered a Titan gray and I'd really like to know that this isn't similar to titanium gray.
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Any color samples yet? I ordered a Titan gray and I'd really like to know that this isn't similar to titanium gray.
It is actually called 'titanium grey' but it gets a little lost in translation ;)
You can google titanium Kmac1 to get an idea of what it will look like.
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Any color samples yet? I ordered a Titan gray and I'd really like to know that this isn't similar to titanium gray.
It is actually called 'titanium grey' but it gets a little lost in translation ;)
You can google titanium Kmac1 to get an idea of what it will look like.
I never said 'titanium gray'.
I'd make 'titan gray'.
Samples of 'Titan Grey' color are progressing very similar to kmac 1.
What color is titanium gray?
I never said 'titanium gray'.
I'd make 'titan gray'.
Samples of 'Titan Grey' color are progressing very similar to kmac 1.
What color is titanium gray?
I never said 'titanium gray'.
I'd make 'titan gray'.
Samples of 'Titan Grey' color are progressing very similar to kmac 1.
What color is titanium gray?
It's Titan Gray Sample Color.
It's Titan Gray Sample Color.
Me likey.
Man, I wish I joined along with my brother. Titan gray looks super nice.
Man, I wish I joined along with my brother. Titan gray looks super nice.
Sorry.
Order is Over.
in Production Processing,
Even I can not correct it.
You can use 1 ea of GB.
Looks great! Man, I almost regret switching from Titan grey to black it looks so good! Spreadsheet looks fine for me, will you be asking if we are going with ANSI or ISO plates latter though email, or do you want us to message you what we would like?
I am busy now,
In my think, there is not enough time to make a program.
Release the document.
Check Your Order (Quantity, Color) based on part Encrypted email address.
(Attachment Link)
QC Real Thing.
The color is so pretty of just as my think !
I'm very happy. :):):):)
> Black
(Attachment Link)
> Titan Gray
(Attachment Link)
> Silver
(Attachment Link)
(QC) quality checking...
(Attachment Link)
(Attachment Link)
And...
A couple of days ago, Duck Show me Real Jet fire.
(Attachment Link)
Hey did you ever send out an email regarding the choice of plate?
Hey did you ever send out an email regarding the choice of plate?
It's only SUS plate
-----
Plate : STS Only (Laser)
Hey did you ever send out an email regarding the choice of plate?
It's only SUS plate
-----
Plate : STS Only (Laser)
There is an ISO and ANSI plate that he showed above
Looks great! Man, I almost regret switching from Titan grey to black it looks so good! Spreadsheet looks fine for me, will you be asking if we are going with ANSI or ISO plates latter though email, or do you want us to message you what we would like?
ANSI or ISO plates choice will be made next week. :)
now on test
Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
Yeah, screwing us over on the 75sq, and now even this project.... Hopefully he doesn't delay this project as much as the other
Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
SUS plate MOQ is 45.
ANSI : 37
ISO : 8
If you want ISO, PM to me.
Any replacement cases found for this yet?
Any replacement cases found for this yet?
in what context
2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Any replacement cases found for this yet?
in what context2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Any replacement cases found for this yet?
in what context2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Any replacement cases found for this yet?
in what context2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Buy a pelican case, or something similar
Any replacement cases found for this yet?
in what context2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Buy a pelican case, or something similar
I can get a case from kin, I was under the impression that this was supposed to come with a case.
The amount has been adjusted, as the TXBag plan is canceled.
I will let yours know when the next KeyPack plan is confirmed.
@PainMaster
Can you share the the design for a weight or the measurements of the cutout and screws and stuff so I can get a weight made? Also wouldn't mind the plate design to to get a brass plate made too :P
I'd be in for brass and/or a weight as well.
@PainMaster
Can you share the the design for a weight or the measurements of the cutout and screws and stuff so I can get a weight made? Also wouldn't mind the plate design to to get a brass plate made too
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
Definitely interested in a spot if anyone's interested in selling, or a Round 2 of the GB.
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
Definitely interested in a spot if anyone's interested in selling, or a Round 2 of the GB.Quote0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
If we don't get some updates soon, there will be a spot available.
Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
Definitely interested in a spot if anyone's interested in selling, or a Round 2 of the GB.Quote0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
If we don't get some updates soon, there will be a spot available.
Why you posting old info we already know has slipped?Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
It is just now today the earliest possible day he thought he could ship by lol. Calm down. Nothing he can do to make leeku ship pcbs faster.
I personally won't buy another custom kb unless it's USB-C and QMK.Unfortunately, there’s not that many options for usb-c right?
I personally won't buy another custom kb unless it's USB-C and QMK.Unfortunately, there’s not that many options for usb-c right?
Sent from my iPhone using Tapatalk
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
Do you have a thread somewhere?
Sent from my iPhone using Tapatalk
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
Do you have a thread somewhere?
Sent from my iPhone using Tapatalk
Not for this - waiting on prototype FC980M replacement PCBs to come in, and for me to assemble them, to make a thread for the project.
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
Do you have a thread somewhere?
Sent from my iPhone using Tapatalk
Not for this - waiting on prototype FC980M replacement PCBs to come in, and for me to assemble them, to make a thread for the project.
For real? 980M pcbs? So in.
PainMaster, have you got any updates for us?
PainMaster, have you got any updates for us?
Yeah likewise, it's almost a week after the PCB's should be done. Have you received anything yet, or what is the plan going forwards?
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
SaiB - CP
(Simple, as is Best. - Compact)
from kbdlab.
- I made it Myself. because I couldn't buy it. -
=========================================================================
> 2018-04-16 Update.
Hello, Everyone.
I talked to Leeku on the phone last night,
We agreed to produce a PCB by two weeks later.
I will begin shipping between 2018-05-15 and 2018-05-18.
I'm sorry for the delay in shipping.
> 2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
=========================================================================
> 2018-02-01
Hi everyone ~!
SaiB - CP Alu Housing was arrived last night.
I'm going to do a one month, quality check & Inspection & Defect Modification request from today.
SUS Plate product schedule is Next week.
PCB LogicBoard is Last week of February (expectation)
(Attachment Link)
> 2017-12-16
GB end.
Order to Factory Complete !!!
Next Notifiacation Schedule is 2017/12/30
See you 14 days later~~
> 2017-12-08 GB Schedule update.
introduce GB Schedule. (expectation)
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
> 2017-12-04
We achieved MOQ 20.
10 More ~!! plz.
> 2017-12-01
Now.
PreOrder is Ended.
GB Form Ready & Start ~!!
Google forms : End (https://goo.gl/UTy3kw)
Please , join this !!!!
> 2017-11-28
Oh....My................God
(Attachment Link)
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
> 2017-11-27
PreOrder 375 + 15 = $390
GrupBuy 395 + 37 (Add Insufficient Shipping Cost) + 18 = $450[/color]
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
> 2017-11-26
Sorry I'm Late !!
Google forms : PreOrder Ended
Please , join this !!!!
> 2017-11-14 update
The amount has been adjusted.
Because, the TXBag plan is canceled.
I will let yours know when the next KeyPack plan is confirmed.
> 2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
=========================================================================
> Interest Checks :
2017-10-28 ~ 2017-12-01 (33 days)
> MOQ :
more than 30 (hope)
> PayPal Registration
2017-11-17 (expectation)
=========================================================================
> PreOrder Payment :
2017-11-25 ~ 2017-12-01 (6 days)
Only the deposits within the period are confirm
> PreOrder Pricing:(South Korea customs charge)
$ 390 (Housing Top / Plate / PCB / Housing Bottom)+ additional Package TXBag+ Free Shipping
=========================================================================
> Group Buy Registration
2017-12-01
> Group Buy Schedule :
2017-12-01 ~ 2018-04-01
> Group Buy Payment :
2017-12-02 ~ 2017-12-15 (14 days)
> Group buy Pricing:(South Korea customs charge)
$ 450 (Housing Top / Plate / PCB / Housing Bottom)+ additional Package TXBag+ Free Shipping
---------------------------------------------------------------
> Component
Housing : Aluminium Top & Bottom 2 piece(7 degrees angle, Weight 3.4kg)
Plate : STS Only (Laser)
Logic Board : Leeku L3 - Compact (Full SMT : not include switches)
Etc : Bolt, Bottom Pad,TXBag(CP & Light Saver Only)
Housing Color : Black, TitanGray, Silver
> Shipping Estimate:
Shipping will be from South Korea with EMS.
Shipping cost will depend on your location.
Each set weighs about 3.03 kg with packaging.
Click here to check your zone (http://eng.koreapost.go.kr/eng/sub/subpage.jsp?contId=e1010601)
Click here to check their prices in Korean Won (http://eng.koreapost.go.kr/eng/sub/subpage.jsp?contId=e1020300)
>Join Form (Example)
Order quantity : 2 ea
Color : Black 1, TitanGray 1
> Order Changes:
Please DO NOT PM me for changes
> Sample Photos :
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Mod Edit: Changed subject from [IC] to [GB].
Hello, Everyone.
2018-05-01 Update.
I talked to Leeku on the phone last night,
We agreed to produce a PCB by two weeks later.
I will begin shipping between 2018-05-15 and 2018-05-18.
I'm sorry for the delay in shipping.
Any updates? It's been 7 months. Any chances of offering bags? I'll pay for a bag if there is an option for ordering one.
I will begin shipping between 2018-05-15 and 2018-05-18.
Hello, Everyone.
2018-05-01 Update.
I talked to Leeku on the phone last night,
We agreed to produce a PCB by two weeks later.
I will begin shipping between 2018-05-15 and 2018-05-18.
I'm sorry for the delay in shipping.
I just sent an email asking what's up with this since they've logged in recently and there are no updates on this.
I think you accidentally put April 26/27 instead of saying May :blank:
Stupid question but I’m joining late through a transfer. Does this pcb support qmk?
Exciting, PCB's arrive already then?
2018-05-28 Update
To SaiB-CP participants.
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
After packing, it will be sent in the order in which you have "Approval" it.
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
Is that 9422 or 9421?
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
Is that 9422 or 9421?
Hello, Everyone.
2018-05-26 Update.
Last confirmation of recipient list.
file Link :
https://drive.google.com/open?id=1X6LprONCibjTFa3LBUAcbAJ8RM1v2PXT
If the recipient has changed or address or 'ANSI or ISO' are different, please PM me.
(I can't change the color.)
This may take a few more days to process such as paypal.
Except for PCB,
Shipping Box, Packaging, Housing, Plates, Screw, etc ...
Everything is ready.
https://imgur.com/rqpTwQg
https://imgur.com/kzygiZr
https://imgur.com/Sgf35nY
PCB was Delay because there are insufficient parts in the factory
The PCB schedule is final confirmed to arrive on Tuesday (5/29).
Everywon won't be any more delay.
For three days from today
Wrap the housing, plate, etc... in a box.
When the PCB arrives on Tuesday, After examining the PCB,
it will be finalized and shipped.
Haven't seen any tracking numbers or anything either, anyone else having any luck? Painmaster, any updates?
2018-05-28 Update
To SaiB-CP participants.
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
After packing, it will be sent in the order in which you have "Approval" it.
2018-06-13 Update.Thanks for all your efforts Pain!
PCB Inspection completed.
Packing starts tomorrow.
I am so tired ...
> Completed.
(Attachment Link)
> Error.
(Attachment Link)
:eek: I'm surprised that wasn't caught in your initial QC... well, I guess we'll just have to wait a little longer. Happy to hear you're willing to keep us updated at least once a week though.
Is the defective issues just those two screw holes? If that's true, and the plate can still screw into the top piece, would you consider selling the defect kits at a discount?
> 2018-07-10 Update.
Last weekend, I picked up the 35 top housing from the factory,
And We have once again inspected the entire shipment.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
I conducted inspection and basic packaging with my younger brothers.
We are going to repair request 6 out of the 35 newly produced top Housing (the remaining 27 have been inspected).
(Attachment Link)
(Attachment Link)
(Attachment Link)
Checking and packing ...
(Attachment Link)
(Attachment Link)
(Attachment Link)
The actual delivery will begin next week.
I'm sorry to Delay
> 2018-07-10 Update.
Last weekend, I picked up the 35 top housing from the factory,
And We have once again inspected the entire shipment.
I conducted inspection and basic packaging with my younger brothers.
The actual delivery will begin next week.
I'm sorry to Delay
> 2018-07-16 UpdateCan't wait for shipping! Thanks for sharing pictures.
Last Weekend, I picked up the (Last) 6 top housing from the factory.
And, I Build TitanGray Sample of realThing.
All the configurations are complete.
After final inspection
Shipment will begin this week!
> TitanGray Sample Mobile Cut
(Attachment Link)
(Attachment Link)
> TitanGray Sample Home Cut
(Attachment Link)
(Attachment Link)
(Attachment Link)
> TitanGray Sample Studio Cut
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
> 2018-07-24 Update.
Domestic Delivery Complete.
International shipping begins tomorrow.
(Attachment Link)
> 2018-08-01 Update.
Sorry, i'm Late
Check your shipping Order.
#0 - Complete
#1 - Complete
#2 - Complete
#3 - Complete
#4 - Complete
#5 - Send
#6 - Complete
#7 - Send
#8 - Send
#9 - Send
#10 - Send
#11 - Send
#12 - Send
#13 - Cancel
#14 - Send
#15 - Shipment tomorrow
#16 - Cancel
#17 - Shipment tomorrow
#18 - Shipment tomorrow
#19 - Shipment tomorrow
#20 - Shipment tomorrow
#21 - Shipment tomorrow
#22 - Shipment tomorrow
Pretty sure he said during the ic that he didn't plan to do a GB for a weight, I'd be interested though. Did you guys get tracking numbers when he sent out the board?
Anyone on the West Coast or close to there get their board yet?West coast here. I've received mine, but they weren't all sent out at the same time so it's irrelevant.
Anyone on the West Coast or close to there get their board yet?
PainMaster,
I have not received anything for #17. Can you email/pm me a tracking number?
Thanks
PainMaster,
I have not received anything for #17. Can you email/pm me a tracking number?
Thanks
Has anyone made a brass weight for theirs?
If not, OP would you mind sharing the measurements of the slot on the underside if you have it?
Board received, starting build soon, will post photos of everything.
Board received, starting build soon, will post photos of everything.
Finally built mine can't wait to bring to work tomorrow :)Show Image(https://uploads.tapatalk-cdn.com/20180904/cd1ed77f1db53019e3bc1e6caa6b6b89.jpg)
I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?A weight was never included but a few posts above some users might be looking to get one made. I would hop on one of those if they open it to the group and would also be interested in a polycarbonate plate for softer typing feel.
I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?
add 1)
The Bottom weight plate design document will be open.
Here is my build.Wow great attention to detail. Looks absolutely phenomenal.
-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT
Thank you so much PainMaster!
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Here is my build.
-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT
Thank you so much PainMaster!
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Here is my build.This board is amazing wow!
-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT
Thank you so much PainMaster!
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)
Thank you!! Now to find out if someone could help us make a weight...
Edit: asked a dumb question.
Edit: asked a dumb question.
Hmm ?? :)
Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
I'd love polycarbonate personally :)Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
I planned switch plate only STS.
But, Because you're often asking, I'll consider it.
Brass ?, Alu?
Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
I planned switch plate only STS.
But, Because you're often asking, I'll consider it.
Brass ?, Alu?
Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
I planned switch plate only STS.
But, Because you're often asking, I'll consider it.
Brass ?, Alu?
Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Cool observation. Much appreciated that you've decide to share the finding and the file. Do you have pics of what this ended up looking like?
Wow, very neat. If you manage to do it in metal, and you have to edit the file again (since you have to still shave off a few milimeters) would you mind sharing that again? I'd be interested in getting one done in steel as well.Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Cool observation. Much appreciated that you've decide to share the finding and the file. Do you have pics of what this ended up looking like?
For sure:Show Image(https://i.imgur.com/ddazzzQ.jpg)
I've only tried it with black mica, which cost like $2 for the piece and it looks pretty good. Will definitely come to a more permanent solution such as stainless steel in the future.
I either lost the screws that came with my kit or didn't get them... in either case can someone educate me on what screws I need for the kit please and thank you
Thank you!I either lost the screws that came with my kit or didn't get them... in either case can someone educate me on what screws I need for the kit please and thank you
9/16" long
Is there supposed to be a gasket for this for the leds?Not really. Mine has the LEDs on.
I am actually a little confused on what you are referring to any way you could link me or if anyone else could chime in I'd greatly appreciate it!I either lost the screws that came with my kit or didn't get them... in either case can someone educate me on what screws I need for the kit please and thank you
9/16" long
Strangely looks like 2/10 cm diameter
I either lost the screws that came with my kit or didn't get them... in either case can someone educate me on what screws I need for the kit please and thank you
Hey guys, troubleshooting question if anyone can help:
I spilled some beer on my board last night. I disconnected from the computer and cleaned it. It didn't seem too bad.
Nothing worked on reconnect, but I loaded new firmware and was able to connect. Everything is working fine until I disconnect from usb. When I reconnect, I hear the "something is connecting via usb sound," but the board doesn't work until I flash the firmware again.
Any ideas?
Hey guys, troubleshooting question if anyone can help:
I spilled some beer on my board last night. I disconnected from the computer and cleaned it. It didn't seem too bad.
Nothing worked on reconnect, but I loaded new firmware and was able to connect. Everything is working fine until I disconnect from usb. When I reconnect, I hear the "something is connecting via usb sound," but the board doesn't work until I flash the firmware again.
Any ideas?
WOW -
I read this by chance.
I'm surprised that communication happen yet.
Thank you very much for your interest. !!!
If you have any questions, please tell me in the comments.
I'll answer as much as I can.
-----------------------------------------------------
During the production of SAB-CP,
In order not to reproduce the hard work that had to be done unintentionally,
I'm developing our own 3 types PCB (with QMK).
80%
60%
OTD replica
(http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5822124)
(Attachment Link)
(Attachment Link)
(Attachment Link)
This looks promising and exciting. Now, where to find an OTD so I can use that latter PCB....WOW -
I read this by chance.
I'm surprised that communication happen yet.
Thank you very much for your interest. !!!
If you have any questions, please tell me in the comments.
I'll answer as much as I can.
-----------------------------------------------------
During the production of SAB-CP,
In order not to reproduce the hard work that had to be done unintentionally,
I'm developing our own 3 types PCB (with QMK).
80%
60%
OTD replica
(http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5822124)
(Attachment Link)
(Attachment Link)
(Attachment Link)
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)
Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Hey PainMaster, could you please release a fixed weight plate file? Did you have weight plates made for your personal SaiB-CPs?
The plate corner radius in your original file seems to be incorrect. It is about 5.5mm whereas the actual bottom piece weight plate cutout has corner radiuses closer to 10mm.
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)
Thanks for taking the time to review the plate file.
If corner radiuses don't match, the weight plate won't fit into the bottom piece cutout (?).
(Attachment Link)
(Attachment Link)