Author Topic: [IC] Future Mekanisk Group Buy's (Read 116834 times)

Atredl · « **Reply #50 on:** Thu, 15 June 2017, 21:36:31 »

Quote from: Puddsy on Thu, 15 June 2017, 21:24:44

Quote from: Atredl on Thu, 15 June 2017, 18:20:05
Quote from: Puddsy on Thu, 15 June 2017, 17:35:23
run em all people will buy them

don't run fjell in a size other than 60 though, it'll look weird

also i don't like fjell pro, i think it goes against the look of normal fjell

I'm curious why you think the pro would look different than the normal fjell. The Fjell Pro has both full 60% and HHKB layouts, albeit with different tops.

Does regular Fjell have HHKB layout?

Also screw holes.

I think those are both "me" things though.

My point is that the Fjell pro has a non-HHKB version. Regular Fjell and Fjell pro non-HHKB should look the same from the outside.

Screw holes are a valid complaint though. I didn't think about that.

Puddsy · « **Reply #51 on:** Thu, 15 June 2017, 21:43:36 »

non HHKB is fine

but screw holes on the bottom are worth noting

SpectreiiI · « **Reply #52 on:** Thu, 15 June 2017, 22:03:51 »

I'm a bit new to this market, but I have researched just about every custom case that has ever been made. Less than a week after I launch my top mounted HHKB case IC, this pops up...

Cobertt · « **Reply #53 on:** Thu, 15 June 2017, 22:10:04 »

Count me in on a Fjell R2 Case

drbobbybones · « **Reply #54 on:** Thu, 15 June 2017, 23:33:26 »

I would buy a R2 Fjell in a heartbeat.

amnesia0287 · « **Reply #55 on:** Thu, 15 June 2017, 23:38:39 »

I'd definitely buy a fjell or pro... Probably one of the aluminum ones too, though maybe not at the same time

.

shinz0 · « **Reply #56 on:** Thu, 15 June 2017, 23:58:38 »

Interested in r2 and pro!

inosint · « **Reply #57 on:** Fri, 16 June 2017, 00:42:05 »

Can't wait for dat Fjell pro!

E3E · « **Reply #58 on:** Fri, 16 June 2017, 01:50:42 »

Of course the FJELL PRO is what people want. I can dig it. Maybe one in dark grey this time around!

Tally810 · « **Reply #59 on:** Fri, 16 June 2017, 02:07:47 »

Top Mount fjell fasho

Sent from my SM-G928V using Tapatalk

moecoffee059 · « **Reply #60 on:** Fri, 16 June 2017, 02:17:29 »

hope 75% in the future,

h3xadat · « **Reply #61 on:** Fri, 16 June 2017, 03:13:22 »

I'm down for the FJELL Classic and the FJELL Pro!

Myan · « **Reply #62 on:** Fri, 16 June 2017, 07:46:09 »

Awwww , give me the puple FJELL HHKB!

Please do not limit, I am so excited!

robotsokk · « **Reply #63 on:** Fri, 16 June 2017, 10:33:31 »

Much hype! At minimum I'd want a Fjell Pro (normal/non-HHKB).

Really hoping to participate as I wasn't aware of R1 until well after it already closed.

johuu · « **Reply #64 on:** Fri, 16 June 2017, 12:20:46 »

Interested in the FJELL HHKB PRO kit.

DanielT · « **Reply #65 on:** Fri, 16 June 2017, 12:29:29 »

I'd be in for a simple one

AlexG · « **Reply #66 on:** Fri, 16 June 2017, 12:54:57 »

I would buy a pro instantly

LeandreN · « **Reply #67 on:** Fri, 16 June 2017, 15:18:02 »

CommonCurt · « **Reply #68 on:** Fri, 16 June 2017, 15:22:45 »

Quote from: LeandreN on Fri, 16 June 2017, 15:18:02

Show Image

Show Image

Show Image

I cast my vote for the Simple once again.
That's a good looking case.

Marutks · « **Reply #69 on:** Fri, 16 June 2017, 15:29:27 »

I want FJELL R2 case! Is it going to be on massdrop.com? Where can I sign up?

TheNamesTy45 · « **Reply #70 on:** Fri, 16 June 2017, 15:45:34 »

Fjell Pro HHKB. Yes please. I want.

LeandreN · « **Reply #71 on:** Fri, 16 June 2017, 15:52:45 »

Quote from: Marutks on Fri, 16 June 2017, 15:29:27

I want FJELL R2 case! Is it going to be on massdrop.com? Where can I sign up?

I am not going to launch it on Massdrop, but you can join my newsletter on mekanisk.co

Quote from: TheNamesTy45 on Fri, 16 June 2017, 15:45:34

Fjell Pro HHKB. Yes please. I want.

Thanks for your interest.

jihadu · « **Reply #72 on:** Fri, 16 June 2017, 15:57:23 »

Will you sell the simple case as a standalone or just as a kit?
I've been looking to replace my GH60s plastic case for a while now.

Enviado do meu SM-A520F através de Tapatalk

mtzgr · « **Reply #73 on:** Fri, 16 June 2017, 17:12:45 »

Would really like to snag the MKSC, looks so clean.

Puddsy · « **Reply #74 on:** Fri, 16 June 2017, 19:03:37 »

That HHKB is nice.

SixtyLife · « **Reply #75 on:** Fri, 16 June 2017, 19:25:47 »

what is the case on the right? I can see "hhkb" in the corner but I've never seen an hhkb case like this

oatmicro · « **Reply #76 on:** Fri, 16 June 2017, 19:31:54 »

Quote from: SixtyLife on Fri, 16 June 2017, 19:25:47

Show Image

what is the case on the right? I can see "hhkb" in the corner but I've never seen an hhkb case like this

Must be HHKB Professional BT(Bluetooth) for sure.

SixtyLife · « **Reply #77 on:** Fri, 16 June 2017, 19:36:01 »

Quote from: oatmicro on Fri, 16 June 2017, 19:31:54

Quote from: SixtyLife on Fri, 16 June 2017, 19:25:47
Show Image

what is the case on the right? I can see "hhkb" in the corner but I've never seen an hhkb case like this

Must be HHKB Professional BT(Bluetooth) for sure.

ahh I see, thanks!

Pwner · « **Reply #78 on:** Fri, 16 June 2017, 19:46:39 »

I slept on r1 of the Fjell but after seeing all the builds.. I have to get in on r2.

quantan267 · « **Reply #79 on:** Sat, 17 June 2017, 01:24:44 »

Count me in on the simple case

so damn sexy, simple classic thing is always the best

DanielT · « **Reply #80 on:** Sat, 17 June 2017, 01:32:31 »

Quote from: LeandreN on Fri, 16 June 2017, 15:18:02

Show Image

Show Image

Show Image

The simple case is just what I need. You have my vote for this one again.

Quakemz · « **Reply #81 on:** Sat, 17 June 2017, 05:54:45 »

I don't think I've supported anything in my life as much as I want to support all of these amazing projects. Beyond amazing work, my friend.

IAmPyhrra · « **Reply #82 on:** Sat, 17 June 2017, 08:32:37 »

I would be in for the Simple case as well as Fjell classic/Pro. These are without a doubt some of the cleanest 60% cases.

Define · « **Reply #83 on:** Sat, 17 June 2017, 11:47:29 »

Down for any HHKB case

Sent from my iPhone using Tapatalk

bmilcs · « **Reply #84 on:** Sat, 17 June 2017, 13:01:06 »

FJELL is unreal. Gorgeous and right up my alley. I don't know if I'm alone but I would have a keeb heart attack if you offered this case in a slightly lower profile. I'm not big on the steep angle and never use keyboard legs when typing.

Anyone else second this? It would be my dream

Auk · « **Reply #85 on:** Sat, 17 June 2017, 13:18:49 »

Quote from: bmilcs on Sat, 17 June 2017, 13:01:06

...not big on the steep angle... ....Anyone else second this?...

If it's possible to make the FJELL style flat and with adjustable feet, but without compromising the look, the result could be very compelling

Doluded · « **Reply #86 on:** Sat, 17 June 2017, 13:24:59 »

Quote from: Auk on Sat, 17 June 2017, 13:18:49

Quote from: bmilcs on Sat, 17 June 2017, 13:01:06
...not big on the steep angle... ....Anyone else second this?...

If it's possible to make the FJELL style flat and with adjustable feet, but without compromising the look, the result could be very compelling

Very... comfjelling

robotsokk · « **Reply #87 on:** Sat, 17 June 2017, 13:40:13 »

Hi LeandreN,

Is the idea that the case colors would be the same as R1, or are there colors you were considering adding/removing? The purple and grey cases are my favorite (grey w/red plate would be a great pairing).

TheNamesTy45 · « **Reply #88 on:** Sat, 17 June 2017, 13:47:00 »

Day 2 since seeing the fjell pro hhkb:

Dear Diary,

I still want this. Working on a way to distort time to hasten my acquisition of this case. Two failed prototypes, but I'm hoping I have a breakthrough soon. Still keeping hold of sanity, but it's becoming increasingly difficult to do so. Will report back tomorrow. End entry.

jenggo · « **Reply #89 on:** Sat, 17 June 2017, 13:54:49 »

aaaaand i'm still waiting for my fjell r1 to be shipped ._.

LeandreN · « **Reply #90 on:** Sat, 17 June 2017, 14:13:47 »

Quote from: jenggo on Sat, 17 June 2017, 13:54:49

aaaaand i'm still waiting for my fjell r1 to be shipped ._.

Nothing will start here before you have FJELL r1 in your hands!

Sent fra min D6603 via Tapatalk

Jedi · « **Reply #91 on:** Sat, 17 June 2017, 17:05:35 »

+1 for any news on a round6 for plates and pcb. Those of us with R1 envy that lost are forever interested in this upcoming GB. Excellent work LeandreN

kekstee · « **Reply #92 on:** Sat, 17 June 2017, 17:15:28 »

The simple one is something I would really consider.

PotatoTM · « **Reply #93 on:** Sat, 17 June 2017, 18:38:43 »

Can anyone post their pictures of their black and/or gray FJELL(s) I'm trying to decide which one I like more!

N0GLUT0N · « **Reply #94 on:** Sat, 17 June 2017, 20:22:38 »

In the hhkb fjell

Sent from my iPhone using Tapatalk

[Lewynlight] · « **Reply #95 on:** Sat, 17 June 2017, 21:13:32 »

*drolls*

i want that fjell or fjell pro ..

on the second thought, i don't want that. i need that to stop my drools.

goodeyesniper85 · « **Reply #96 on:** Sun, 18 June 2017, 11:09:03 »

All the interest. Would also love to see the brass plates be a regular a la carte item as well. Possibly add custom engraving (for an additional cost obviously and time frame). Looks great!

Sent from my iPhone using Tapatalk

malattia · « **Reply #97 on:** Sun, 18 June 2017, 21:49:29 »

Interested in the R2. I'd certainly get one, maybe even two.

Manticzeus · « **Reply #98 on:** Mon, 19 June 2017, 08:17:04 »

I'm so interested I made an account for this.

DanielT · « **Reply #99 on:** Mon, 19 June 2017, 11:38:03 »

Will the simple case have a weight? That would be sick!

News:

Author Topic: [IC] Future Mekanisk Group Buy's (Read 116834 times)