Author Topic: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping  (Read 58191 times)

0 Members and 1 Guest are viewing this topic.

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #100 on: Tue, 06 March 2018, 07:53:34 »
Don't think saying that "you might run away with their money" would be very reassuring.

Offline Peppermint216

  • Posts: 208
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #101 on: Tue, 06 March 2018, 07:55:00 »
I would loose "Will we run away with your money? Maybe A_A" in the original post.

Offline Visionaire

  • Posts: 613
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #102 on: Tue, 06 March 2018, 14:23:49 »
I would loose "Will we run away with your money? Maybe A_A" in the original post.

yeaaaa. Not really funny. ;)

Offline SirWalross

  • Posts: 10
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #103 on: Thu, 08 March 2018, 08:41:21 »
Hey,
just a quick question, are some if any of the kits (especially the HHKB in white :D), not being produced due to not reaching MOQ or did all kits reach MOQ? I'm kinda confused, sorry if this question was asked already, then I must have overread it. Thanks

Offline Fallakin

  • Posts: 22
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #104 on: Tue, 13 March 2018, 17:10:02 »
Hey,
just a quick question, are some if any of the kits (especially the HHKB in white :D), not being produced due to not reaching MOQ or did all kits reach MOQ? I'm kinda confused, sorry if this question was asked already, then I must have overread it. Thanks

According to Sennin on Discord he's working with the manufacturers to see if they can still do some colors if those didn't meet MOQ. Also from Discord, if you ordered white you're fine.

Offline afrokobe

  • Posts: 296
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #105 on: Wed, 14 March 2018, 10:08:59 »
I ordered brass, is this going through or not?  If its not, I would prefer a refund... don't really like giving out zero interest loans for no reason

Offline jimirolln

  • Posts: 282
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #106 on: Wed, 14 March 2018, 14:35:36 »
sent an email to the sales team to change color to black...subject chiwi...didn't hear back...my bad for not picking black on the order...just chekn

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #107 on: Thu, 15 March 2018, 05:04:25 »
do u have order#?

Offline jimirolln

  • Posts: 282
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #108 on: Thu, 15 March 2018, 05:14:38 »
do u have order#?
000002509...ty so much...this means alot to me...you are the best

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #109 on: Thu, 15 March 2018, 05:14:52 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

Offline jimirolln

  • Posts: 282
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #110 on: Thu, 15 March 2018, 05:22:59 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.
i don't understand...but as long as i can get the black case i am good with it

Offline SirWalross

  • Posts: 10
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #111 on: Thu, 15 March 2018, 15:45:00 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.
Does this affect all kits or just some?

Offline Fallakin

  • Posts: 22
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #112 on: Sat, 17 March 2018, 15:04:25 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

Are you going to email people who chose a color that didn't make MOQ and ask if they have a different color choice that did or a refund?

Offline Visionaire

  • Posts: 613
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #113 on: Thu, 22 March 2018, 19:43:06 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

Sent you a PM and a message on Discord. Thanks.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #114 on: Fri, 23 March 2018, 01:10:09 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

Sent you a PM and a message on Discord. Thanks.

Received.
reply u later

Offline Visionaire

  • Posts: 613
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #115 on: Sun, 25 March 2018, 14:12:03 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

Sent you a PM and a message on Discord. Thanks.

Received.
reply u later

3 days and no reply. Sent you a follow up here, Discord and email. I look forward to your prompt response.

Offline KaosJ

  • Posts: 1054
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #116 on: Tue, 27 March 2018, 11:00:48 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

Sent you a PM and a message on Discord. Thanks.

Received.
reply u later

Sennin there are news about the black brass? Not happening? 




Offline Fallakin

  • Posts: 22
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #117 on: Tue, 27 March 2018, 13:54:00 »
This is his latest update on Discord:

192564-0

Offline KaosJ

  • Posts: 1054
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #118 on: Tue, 27 March 2018, 14:11:57 »
This is his latest update on Discord:

(Attachment Link)


Is that pic for gold brass or black brass version? 




Offline Visionaire

  • Posts: 613
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #119 on: Tue, 27 March 2018, 14:51:26 »
This is his latest update on Discord:

(Attachment Link)


Is that pic for gold brass or black brass version?

No word specifically on the brass versions.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #120 on: Tue, 27 March 2018, 22:52:46 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

Sent you a PM and a message on Discord. Thanks.

Received.
reply u later

Sennin there are news about the black brass? Not happening? 
Quantity is not enough.
I can only make several black samples for myself or testing :(
If we make them with the quantity, we're likely to lose money.

Offline cldskt

  • Posts: 253
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #121 on: Tue, 27 March 2018, 23:58:20 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

Sent you a PM and a message on Discord. Thanks.

Received.
reply u later

Sennin there are news about the black brass? Not happening? 
Quantity is not enough.
I can only make several black samples for myself or testing :(
If we make them with the quantity, we're likely to lose money.

To be sure, this is with regards to the Full-Brass Version yes? Not the aluminium ones with brass plates/weights?


Sent from my iPhone using Tapatalk


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #122 on: Thu, 29 March 2018, 01:45:09 »
Due to quantity issue, we have to make a new deal.
We're discussing with manufacturer about higher price w/ lower quantity.
If the cost won't make us losing money, we'll make as much options as possible.

This is specifically regarding the black PVD version. AFAIK, all colours that went to the group buy stage are being made.
Sent you a PM and a message on Discord. Thanks.

Received.
reply u later

Sennin there are news about the black brass? Not happening? 
Quantity is not enough.
I can only make several black samples for myself or testing :(
If we make them with the quantity, we're likely to lose money.

To be sure, this is with regards to the Full-Brass Version yes? Not the aluminium ones with brass plates/weights?


Sent from my iPhone using Tapatalk

Offline afrokobe

  • Posts: 296
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #123 on: Thu, 29 March 2018, 12:23:56 »
so if this is not going through, can I receive a refund for my all brass?

Offline Peppermint216

  • Posts: 208
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #124 on: Thu, 29 March 2018, 12:29:56 »
Something about this whole GB doesn't feel right. Based on everything sennin has said, I really don't know what the status of the brass or alu versions is atm, the buy ended a month ago.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #125 on: Thu, 29 March 2018, 13:03:30 »
so if this is not going through, can I receive a refund for my all brass?

For all options has only few people chose
Manufacturer offered us an acceptable cost after discuss.
And all the options should be made.
We'll check it again with manufacturer again when submit orders.

Brass with "black" PVD GB won't happen due to the interesting check result.
Nobody will effect because the GB is never launched.

Something about this whole GB doesn't feel right. Based on everything sennin has said, I really don't know what the status of the brass or alu versions is atm, the buy ended a month ago.
Due to the quantity came in significantly below result from interesting check.
The whole deal with manufacturer has to start over.
We spend some time to ask them made some options with low quantity.
And finally we find a way to make sure all option be made.
« Last Edit: Thu, 29 March 2018, 13:13:29 by sennin32 »

Offline bminhz

  • Posts: 114
  • Location: San Pellegrino
[GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #126 on: Thu, 29 March 2018, 13:12:37 »
This would mean the original all brass (not black one) will be made right?

Offline cldskt

  • Posts: 253
  • Location: Rabbithole
  • Wallet and hobby aren't friends
[GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #127 on: Thu, 29 March 2018, 13:16:05 »
This would mean the original all brass (not black one) will be made right?
Based on Discord, that is correct. As for alu versions, all colors will be made.

The one that is definitely won’t be made as of now is the Black PVD Brass version.


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline jimirolln

  • Posts: 282
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #128 on: Thu, 29 March 2018, 13:16:34 »
rest assured the details are being managed and the orders are being fulfilled...i would encourage participants unsure of the gb status to refer to the discord as it is very helpful and questions or concerns you have may have already been hashed out and is a live feed of information
« Last Edit: Thu, 29 March 2018, 13:18:47 by jimirolln »

Offline BerserkZz

  • Posts: 44
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #129 on: Thu, 17 May 2018, 14:47:01 »
Any updates?

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #130 on: Sat, 19 May 2018, 00:00:34 »
Any updates?
Manufacturer is making aluminum version now :)

Offline cldskt

  • Posts: 253
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #131 on: Sat, 19 May 2018, 00:05:41 »
Any updates?
Manufacturer is making aluminum version now :)

That's good to hear. Are we still on track for the current timeline? Thanks for the update sennin much appreciated  :thumb:


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline Stagione

  • Posts: 53
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #132 on: Wed, 30 May 2018, 05:31:41 »
Will there be extras available on your store after GB ships?

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #133 on: Thu, 05 July 2018, 04:55:14 »
Any updates? Are we shipping yet?

Offline BerserkZz

  • Posts: 44
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #134 on: Sat, 14 July 2018, 23:58:32 »
Are we still on track?

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #135 on: Sun, 15 July 2018, 06:01:45 »
Hey, everybody!
We just finished all CNC process.
Anodizing and surface treatment should finish soon.
But we just receive white sample, so white might delay for a while.
Hope they can be sent during Aug for white version.
Here's the white case, pic from manufacturer.

Offline Peppermint216

  • Posts: 208
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #136 on: Sun, 15 July 2018, 06:06:02 »
For those involved paypal protection expires early August (atleast for me it does).

Offline Visionaire

  • Posts: 613
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #137 on: Wed, 18 July 2018, 10:03:09 »
For those involved paypal protection expires early August (atleast for me it does).

Good point.

Offline azulyf

  • Posts: 66
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #138 on: Mon, 30 July 2018, 00:34:18 »
Any update? Are we still planning ship before July ends? Looks like Sennin has been silent since updating with anodize finish 10 days ago.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #139 on: Thu, 02 August 2018, 00:10:26 »
Any update? Are we still planning ship before July ends? Looks like Sennin has been silent since updating with anodize finish 10 days ago.
Hi,
The anodizing Tiffany got wrong color.
We've ask manufacturer anodize again.
It has finished and on the way to us :)

Offline azulyf

  • Posts: 66
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #140 on: Thu, 02 August 2018, 01:25:25 »
Any update? Are we still planning ship before July ends? Looks like Sennin has been silent since updating with anodize finish 10 days ago.
Hi,
The anodizing Tiffany got wrong color.
We've ask manufacturer anodize again.
It has finished and on the way to us :)
Show Image


Thanks for the update. How about rose gold ones?

Offline Fallakin

  • Posts: 22
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #141 on: Fri, 24 August 2018, 08:29:01 »
Any update? Are we still planning ship before July ends? Looks like Sennin has been silent since updating with anodize finish 10 days ago.
Hi,
The anodizing Tiffany got wrong color.
We've ask manufacturer anodize again.
It has finished and on the way to us :)
Show Image


Honestly, that's beautiful.

Can't wait.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #142 on: Mon, 27 August 2018, 22:17:51 »
We forgot paste the image of rose gold!
Here it is.


We're packing all cases.
Parts come here separately, we have to spend some time to prepare all packs :)

Offline mike-y

  • Posts: 75
  • Location: California, USA
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #143 on: Wed, 29 August 2018, 19:55:35 »
Very nice!  I was getting a little worried about this group buy, but good to hear that things are moving along.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #144 on: Sat, 01 September 2018, 07:49:52 »
Very nice!  I was getting a little worried about this group buy, but good to hear that things are moving along.
Sorry for the delay O_Q

Offline mpaarating

  • Posts: 20
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #145 on: Mon, 10 September 2018, 10:13:51 »
Got my Chiwi on friday! Here's the finished product! t has 62g Zealios on the alphas, 78g Zealios on the mods, UV LEDs under switches.






Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg]
« Reply #146 on: Tue, 11 September 2018, 02:13:52 »
Hi,
guys,
we've sent some cases.
but white case got damaged surface during shipping.
we've send them to sandblast and ED processing.
they should be sent in 2 weeks :)

Offline cldskt

  • Posts: 253
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #147 on: Sat, 15 September 2018, 05:20:11 »


Thanks Sennin for relatively smooth GB! ;)


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline KaosJ

  • Posts: 1054
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #148 on: Sat, 15 September 2018, 17:22:18 »
Any photo of the chiwi full brass?




Offline Jacob4341

  • Posts: 69
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #149 on: Sat, 15 September 2018, 17:27:07 »
Are there any extras or is anyone looking to sell their kit?