[GB]Revo RJ kit hhkb layout custom(waiting to ship out)

[Perfex]

Anyone know the keys to control the backlighting?

Here are the B.face instructions, I’m going to assume it’s the same?

http://blog.winkeyless.kr/185

[AlexG]

Anyone know the keys to control the backlighting?

Here are the B.face instructions, I’m going to assume it’s the same?

http://blog.winkeyless.kr/185

They're not as far as I can tell. It's already been remapped for HHKB layout so I'm not sure what the fn layer has been changed to. It's definitely not the same.

[Kafka]

Shouldn't have ordered from Oco fml

[gnmar2723]

Shouldn't have ordered from Oco fml

It gets here when it gets here. :shrug:

If I've waited this long, I can wait just a little more.

[mintyfruits]

Shouldn't have ordered from Oco fml

It gets here when it gets here. :shrug:

If I've waited this long, I can wait just a little more.

I think the frustration comes from the fact that we could have just ordered through Revo and not had to wait, period. I’m just jelly seeing everyone post their board, but ours haven’t shipped. ._.

[RevoTeam]

I just tried it on the Alu plate, and split backspace is a about 1mm higher than not split. The easy is to grind off that 1 mm on it. Or i can make some new plate when i get the money from paypal(could be very long).

[RevoTeam]

Anyone know the keys to control the backlighting?

Here are the B.face instructions, I’m going to assume it’s the same?

http://blog.winkeyless.kr/185

They're not as far as I can tell. It's already been remapped for HHKB layout so I'm not sure what the fn layer has been changed to. It's definitely not the same.

Have you download bootmapper? It's all in there. You can change it to your liking.

[AlexG]

I just tried it on the Alu plate, and split backspace is a about 1mm higher than not split. The easy is to grind off that 1 mm on it. Or i can make some new plate when i get the money from paypal(could be very long).

I think most people that want a split backspace are going to use a different plate. That's what I'm doing. Personally, I think you've done enough, the kit is amazing. I get happy every time I look down at it / type on it.

[Skuloth]

Can anyone recommend somewhere to buy an aluminum plate from?

[AlexG]

Can anyone recommend somewhere to buy an aluminum plate from?

1upkeyboards

[Perfex]

https://sentraq.com has some aluminum plates, 1up only has carbon, brass, and SS at the moment.

[Skuloth]

Can anyone recommend somewhere to buy an aluminum plate from?

1upkeyboards

https://sentraq.com has some aluminum plates, 1up only has carbon, brass, and SS at the moment.

Thanks guys

[AlexG]

I got my brass from 1up. Going to build with it when I get my Zeal60 in on Tuesday. Was half tempted to get the carbon fiber. The LEDs on the b.fake are way too dim

[Puddsy]

I got my brass from 1up. Going to build with it when I get my Zeal60 in on Tuesday. Was half tempted to get the carbon fiber. The LEDs on the b.fake are way too dim

Try a color with higher forward voltage if you're talking about in-switch.

[poq]

My kit arrived today, managed to **** up building in about 5 minutes - forgot the stabilisers needed to go on before the plate ) Got it built though, still amazed by how solid it feels. Anyone have tips for getting rid / reducing spacebar rattle?

[ambalek]

My kit arrived today, managed to **** up building in about 5 minutes - forgot the stabilisers needed to go on before the plate ) Got it built though, still amazed by how solid it feels. Anyone have tips for getting rid / reducing spacebar rattle?

I usually use thick lube on the stabiliser stems to reduce rattle. For my Revo build I actually used Zeal's transparent stabilisers and the spacebar sounds amazing (with thick lube and GMK caps). I couldn't really see a difference between the ones Raymond shipped and Zeal's, but I've had good experiences with the Zeal ones in other builds so I used those this time.

[midnight2903]

My kit arrived today, managed to **** up building in about 5 minutes - forgot the stabilisers needed to go on before the plate ) Got it built though, still amazed by how solid it feels. Anyone have tips for getting rid / reducing spacebar rattle?

I usually use thick lube on the stabiliser stems to reduce rattle. For my Revo build I actually used Zeal's transparent stabilisers and the spacebar sounds amazing (with thick lube and GMK caps). I couldn't really see a difference between the ones Raymond shipped and Zeal's, but I've had good experiences with the Zeal ones in other builds so I used those this time.

Not to mention thick-lubing it prevented the stab wires from popping out when I pull out the keycaps. +1

[ArchDill]

Still waiting on Blue-Grey for O.co shipment?

Regret not getting it from Raymond...

:feelsbadman:

[N0GLUT0N]

Still waiting on Blue-Grey for O.co shipment?

Regret not getting it from Raymond...

:feelsbadman:

Ya I regret getting it from oco, I want to start building! Lol


Sent from my iPhone using Tapatalk

[AlexG]

Rebuilt using a brass plate and Zeal60. Pretty happy with the outcome. Figured some of you might be interested in what it sounds likes.

[krispy]

Any news on when the oco orders are going to ship? 

[Vadurr]

+1 for oco updates

[Puddsy]

Any news on when the oco orders are going to ship? 

Check kbdist

[Vadurr]

For the lazy:

2. REVO HHKB RJ Kit

I'm sorry for the delays. I'm awaiting information from the REVO team. Hopefully you guys can all be patient with this. I was told that this will be the only run for this REVO HHKB Kit.

[RevoTeam]

Hi Everyone

Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.

Thanks for understanding.

And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.

[ArchDill]

Hi Everyone

Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.

Thanks for understanding.

And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.

Damn...

[Vadurr]

Hi Everyone

Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.

Thanks for understanding.

And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.

Damn...

Tfw..tfw...tfw

[Perfex]

Tfw..tfw...tfw

Every day I seem to learn a new acronym, I guess I’m getting to old to keep up )

[Sent]

Just some potato pics.  Shout out to Badwrench for assembling it for me so quickly.  Great guy.

[eyedrop]

That is beautiful.   

[Sent]

Looks a bit better now.  I noticed the keys were sunk in and realized the diffuser was installed.  Took it out and voila.  USB cable fits much better, too.

[RevoTeam]

Looks a bit better now.  I noticed the keys were sunk in and realized the diffuser was installed.  Took it out and voila.  USB cable fits much better, too.

yup. Take the diffuser out and u will be just fine. And great pics btw. I liked them.


从我的 iPhone 发送，使用 Tapatalk

[Sent]

Thanks for the great board, Raymond.  Nothing but pleased with it.  I keep touching the anodizing, haha.

[aquafreshfan]

Wow, that pink looks awesome!

[ioioioio]

is there any chance how to get this revo hhkb kit again? or any open GB?

[Puddsy]

is there any chance how to get this revo hhkb kit again? or any open GB?

you gotta buy aftermarket, he said only one round

[mnmlisme]

bummer. I was looking for a HHKB layout case that's solid. any other option?

[midnight2903]

bummer. I was looking for a HHKB layout case that's solid. any other option?

Wait for fjell pro and probably not get it since it would be limited.

[mnmlisme]

bummer. I was looking for a HHKB layout case that's solid. any other option?

Wait for fjell pro and probably not get it since it would be limited.

yeah I know about fjell pro and yeah, probably won't score one lol revo is a really nice HHKB layout case, but yeah, missed it, like many other great GB out there lol

[iNViSiBiLiTi]

bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina. 

[Puddsy]

bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

LZ CLS-H coming after CLS-M

[gnmar2723]

bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

LZ CLS-H coming after CLS-M

That's the first I've heard of that board. Any guess on how soon "soon" really is?

[iNViSiBiLiTi]

bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

LZ CLS-H coming after CLS-M

That's the first I've heard of that board. Any guess on how soon "soon" really is?

LZ said he would be doing several keyboards with the CLS design in different layouts. First was TKL, then 75%, and lastly 60%.

Sent from my Pixel using Tapatalk

[ArchDill]

Does shipping resume today/tomorrow?

[mintyfruits]

Does shipping resume today/tomorrow?

My fingers are crossed!

[ArchDill]

O.co delivery update?

[mnmlisme]

bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

I don't like Tina, not minimalis enough for my taste

[mnmlisme]

LZ CLS-H coming after CLS-M

korean made, 60%? thank you for info. now what do I have to do so I won't missed his IC/GB announcement? can I get notification somehow?

[Puddsy]

can I get notification somehow?

No.

[mnmlisme]

can I get notification somehow?

No.

thought so lol. ok will do it the ol' fashion way then *stares