NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
Hi guys here was some pictures i take from factory plate was done ,bottom and middle is manufacturing if all things go well it will be done almost on 15th May. Show ImageShow ImageShow Image
Group Buy going so quick, thanks for the update Exclusive!
No it is not compatible. It's close though but you'd have to do some cutting, which I do not recommend.
I'm not sure if this has been asked before, but I see the port for this is centered and the OP says RGB bottom. Would that make this PCB compatible with a Viper case? Or am I overlooking something
Quote from: mmontess on Wed, 09 May 2018, 14:14:07I'm not sure if this has been asked before, but I see the port for this is centered and the OP says RGB bottom. Would that make this PCB compatible with a Viper case? Or am I overlooking somethingI did a comparison between E6 and Viper,There are two points after the PCB comparison 1. The distance between switches in e6 pcb is less than the one in viper --> means the e6 pcb is not compatible with viper plate2. The width of e6 pcb is larger than viper --> means you need to cut it narrower first if you insist to use one with your own plate3. the USB port position is exactly same, also the MCU position --> means no change need to be made about the case
Quote from: lanyusea on Thu, 10 May 2018, 22:05:47Quote from: mmontess on Wed, 09 May 2018, 14:14:07I'm not sure if this has been asked before, but I see the port for this is centered and the OP says RGB bottom. Would that make this PCB compatible with a Viper case? Or am I overlooking somethingI did a comparison between E6 and Viper,There are two points after the PCB comparison 1. The distance between switches in e6 pcb is less than the one in viper --> means the e6 pcb is not compatible with viper plate2. The width of e6 pcb is larger than viper --> means you need to cut it narrower first if you insist to use one with your own plate3. the USB port position is exactly same, also the MCU position --> means no change need to be made about the caseHow are the switch distances different? Doesn't that mean the keycaps won't work as well? I thought that stuff was all standard.
Quote from: merlin64 on Fri, 11 May 2018, 13:28:46Quote from: lanyusea on Thu, 10 May 2018, 22:05:47Quote from: mmontess on Wed, 09 May 2018, 14:14:07I'm not sure if this has been asked before, but I see the port for this is centered and the OP says RGB bottom. Would that make this PCB compatible with a Viper case? Or am I overlooking somethingI did a comparison between E6 and Viper,There are two points after the PCB comparison 1. The distance between switches in e6 pcb is less than the one in viper --> means the e6 pcb is not compatible with viper plate2. The width of e6 pcb is larger than viper --> means you need to cut it narrower first if you insist to use one with your own plate3. the USB port position is exactly same, also the MCU position --> means no change need to be made about the caseHow are the switch distances different? Doesn't that mean the keycaps won't work as well? I thought that stuff was all standard.Key units are 19.05mm as standard, E6 is 19.00mm. Keycaps are 18.1mm wide (1u).
Makes me wonder if the PCB would fit the 356mini? They seem very similar now I'm thinking about it.
Quote from: xondat on Fri, 11 May 2018, 20:14:27Makes me wonder if the PCB would fit the 356mini? They seem very similar now I'm thinking about it.i don't believe it will, i think it needs to be ground down too much since the mini has super tight tolerances
Any update on the anodizing? Can't wait for these to ship!
PCb was finish Bootmapper:Show Image Show Image
Since we’ve got time while we wait, how are the different switch plates cut? Laser, water jet, CNC?
Quote from: Atredl on Mon, 21 May 2018, 04:25:39Since we’ve got time while we wait, how are the different switch plates cut? Laser, water jet, CNC?We are CNC the plate .
Quote from: excluisve on Mon, 21 May 2018, 04:27:33Quote from: Atredl on Mon, 21 May 2018, 04:25:39Since we’ve got time while we wait, how are the different switch plates cut? Laser, water jet, CNC?We are CNC the plate .Even the brass plate?
Quote from: Atredl on Mon, 21 May 2018, 04:29:28Quote from: excluisve on Mon, 21 May 2018, 04:27:33Quote from: Atredl on Mon, 21 May 2018, 04:25:39Since we’ve got time while we wait, how are the different switch plates cut? Laser, water jet, CNC?We are CNC the plate .Even the brass plate? All plate was cnc .pc -alu-brass
CNC is ready done still need wait 2 days or more to check
Tomorrow is the last day of May; any updates?
Yea CNC will all done tomorrow , shipping day delay some days
Quote from: excluisve on Wed, 30 May 2018, 21:02:17Yea CNC will all done tomorrow , shipping day delay some daysSo after cnc they go to anodizing or is it good to go after that?Sent from my VS996 using Tapatalk
Quote from: OnceSavedGaming on Wed, 30 May 2018, 21:35:09Quote from: excluisve on Wed, 30 May 2018, 21:02:17Yea CNC will all done tomorrow , shipping day delay some daysSo after cnc they go to anodizing or is it good to go after that?Sent from my VS996 using TapatalkAfter done I will check each part then go to anodized
Quote from: excluisve on Wed, 30 May 2018, 21:41:03Quote from: OnceSavedGaming on Wed, 30 May 2018, 21:35:09Quote from: excluisve on Wed, 30 May 2018, 21:02:17Yea CNC will all done tomorrow , shipping day delay some daysSo after cnc they go to anodizing or is it good to go after that?Sent from my VS996 using TapatalkAfter done I will check each part then go to anodizedDo you think we will have them before the end of June or later?Sent from my VS996 using Tapatalk
Given the delays I may have to switch shipping address. Could you please confirm with me before sending?Sent from my mobile using Tapatalk
plz check you orders again if anything was wrong plz let me know like this : #23 - PC plate change to brass plate ,make it clear thanks !before ship i will let you guys check the shipping information ，btw those information was Privacy how to show you guys to check it ? one by one ??
