Hey guys, I just received a jetfire kit. Have not soldered in switches/LEDs yet
When I plug in the PCB it says "Unknown USB Device needs more power than the port can supply" and then I need to reboot my computer before it will recognize a keyboard again.
Any idea what is going on/how I can fix it? Thanks!
This might not be the right place to ask but can someone point me into the right direction to solve this issue.
I finally have the time to assemble my Orion V2 and when I was examining the PCB (plugging into the PC), it says "USB device not recognized" and a random number of RGB leds will flash (blue) once after plugging in.
I have tried another PC and the same issue persists.
You would need to install the ATm32U4DFU driver manually. I believe you can install the drivers manually by following these steps:
1. Install Atmel Flip:
http://ww1.microchip.com/downloads/en/DeviceDoc/JRE%20-%20Flip%20Installer%20-%203.4.7.112.exe2. Open Device Manager
3. Unplug Jetfire. Hold down Home button (its the very top key above the arrow cluster), then plug the micro usb cable in. You should now be in firmware mode (underglow light should not show)
4. In Device Manager you should see ATm32U4DFU. It might show up as 'unknown usb device (device descriptor failed)
5. Right click it>Update Driver>Browse My Computer for Driver Software
6. Navigate to the USB folder inside the Flip folder you installed in step 2. It should be something like C:\Program Files (x86)\Atmel\Flip 3.4.7\usb
7. Click Next. The driver for ATm32U4DFU should now install.
I used qmk toolbox to flash the hex file onto the jetfire.
in order to make use of the 02d software, you have to change your Windows locale to Korea. I also had to change the windows display language to Korean as well. After I was able to use the POS 02d software.
dated guide, but should still apply for the jetfire:
http://www.adamfalwell.com/projects/octagon/assets/-simplified-guide--duck-pcb-flash-firmware---keymapping.docxyou can get the latest 02d software here (latest changelog 5/11/18):
http://kbdlab.co.kr/index.php?document_srl=100301&mid=board_sw