geekhack
geekhack Marketplace => Interest Checks => Topic started by: MisterKnife on Sun, 05 July 2020, 10:41:30
-
[attachimg=1]
Hey there,
I've made a PCB for the CA66 with stm32.
features:
- STM32F072
- QMK compatible
- ALPS and MX compatible
- ESD protection
- Green PCB
- ENIG-RoHS
- Case grounded
- 6 RGB LEDs
- Molex Pico connector between the two boards
- No LEDs for the keys (backlight)
- push button to put the MCU into DFU mode for when flashing really failed. (normal bootloader via ESC key)
- usb-c breakout pcb
Layouts
(https://geekhack.org/index.php?action=dlattach;topic=96401.0;attach=198959;image)
the caps lock key has two different placements
Price
Unsure still but around 40-50
Shipping
Via DHL
GB post
https://geekhack.org/index.php?topic=108685.0
Group buy for round 2 will be live at 20 September and will run for 2 weeks
-
Someone needs to run the complete keyboard again
-
Would you be willing to run a plate GB at the same time? Quantity really helps when cutting plates.
-
Shipping to UE will be 32,5 EUR???
-
Shipping to UE will be 32,5 EUR???
that's including packaging. so express DHL for EU and outside EU it's non-express to keep the price the same. if the shipping price is well below that I will refund some of the price.
-
Would you be willing to run a plate GB at the same time? Quantity really helps when cutting plates.
Just the PCB for now, unfortunately.
-
I would definitely be interested in this as my current ca66 has given me nothing but headaches.
-
Nice, yeah there is quite some interest. I started the GB thread but it's awaiting approval
-
(https://i.imgur.com/vZfhyMb.png)
Cleaned up the routing and ordered a PCB to validate that the added layouts are in the right position. Still waiting for approval for the GB
-
Filled out the form. Sometimes I get double repeated input which I hear is a common issue so having a more stable PCB would be nice. Otherwise I love this board and want to keep it around for a long time!
-
GB is live https://geekhack.org/index.php?topic=107331 (https://geekhack.org/index.php?topic=107331)
-
GB for round 2 will be on the 20th
-
Does it also provide drawing files to PCB buyers?
-
No it does not
-
Will there be any change from r1?
I have two of those and would suggest the following improvements:
- Slightly larger switch pin holes
- Raised LED-strip (to avoid light bleeding)
- ISO Support
-
Will there be any change from r1?
I have two of those and would suggest the following improvements:
- Slightly larger switch pin holes
- Raised LED-strip (to avoid light bleeding)
- ISO Support
The R2 will have ISO support and the holes will be slightly so larger.
the LEDs will remain the same.
-
Sorry the GB isn’t open yet. Awaiting post approval from the moderator. Just keep an eye out
-
We are live https://geekhack.org/index.php?topic=108685.0
-
One week to go. This will be the last GB I do for this board.
If we have not hit the total of 30 pcbs in a week I will postpone it by one more week.
-
Joined. I never got around to assembling my CA66, but have been thinking about getting around to it lately.
Looking forward to getting around to it with this :)
EDIT: My head went missing, only just realized I bumped the IC not the GB 😳 :-X
-
Any chance for a third round?
-
Joined. I never got around to assembling my CA66,
.......you MONSTER!
-
Any chance for a third round?
+1
-
Any chance for a third round?
+1
He says a few post above "This will be the last GB I do for this board. If we have not hit the total of 30 pcbs in a week I will postpone it by one more week."
Sounds like their was not enough interest to warrant one.
I rather have a whole new board, not just the PCB anyway.
-
If we can get a total of 20 boards as interested then I can do another run. I'll setup another run for an IC. will post the link here
-
:thumb:
I'm in
-
If you are still planning on doing another run, I'd purchase 2.
-
I'd be in for one
-
Are the pcb plans available if someone wanted to get a one off made? Is that even possible? Excuse my ignorance.
-
I would happily buy one and pitch some extra $ to support the project in general. My R2 CA66 is a little finicky and I'd love to replace the board and switches. Thanks.
-
I said I was opening up an IC for this again but I'm holding this as due to chip shortages I am unable to produce them as we speak.
-
I said I was opening up an IC for this again but I'm holding this as due to chip shortages I am unable to produce them as we speak.
makes sense. Still interested in the next year or so if chip availability ever gets resolved
-
will keep an eye out on supply
-
will keep an eye out on supply
Any updates on this? Anything we can do to help get an order organized? Thanks, sorry to pester.