I never thought I wanted a TKL. This has changed my mind.
Please, include pictures with the colors palette if you can?
Please, include pictures with the colors palette if you can?
What kind of shipping cost could a US customer expect for this GB?
Sent from my Pixel using Tapatalk
Good luck with this GB! This keyboard definitely looks out of the world.
It looks like the plate doesn't support switch top removal, whereas some prototypes have shown compatibility. Can this be clarified? ty
What kind of shipping cost could a US customer expect for this GB?
Sent from my Pixel using Tapatalk
Will you combine shipping? Do I submit two separate orders?
Will you lower the value of the package to avoid customs? To like $20.
It's hard to decide the color now. I like silver but I just joined the GB for a silver LZ CLS. 2 silver kb at the same time is a good idea? zzz :rolleyes:yea I'm totally stuck on color choices
Does the plate support switch top removal?
Aluminum or steel switch plate that does not allow for switch modification
Does the PCB come with the RGB underglow LEDs pre-soldered?
Meaning all we need to solder in are switches and (optional) in switch LEDs?
Are the prototype colors actual prototypes with the actual colors we will be seeing or are those just renders?
Kind of disappointed in the grey that was settled on as the grey from the interest check didn't seem as green. If it's really supposed to be like that might have to go with black or blue then.
Sent from my iPhone using Tapatalk
Estimation date for billing to paypal?
Estimation date for billing to paypal?
From the information in the OP: orders close on February 12, then 2 weeks for payments.
Any example photos of the starlight silver colour? :)
Will you lower the value of the package to avoid customs? To like $20.
This please!
Is this still compatible with the Winkeyless B.87 PCB? Is there an option to buy the case without PCB?
Any example photos of the starlight silver colour? :)
Clear-anodized aluminum (no dye to make it lighter or darker, so just silver).
Is this still compatible with the Winkeyless B.87 PCB? Is there an option to buy the case without PCB?
not compatible, the usb port is top left on the b.87, the case has a cutout in between the end of the f row and beginning of the navigation keys
gon's tkl pcb may be compatible though
Is there a pic of the black variant that I'm missing?
- Thanks to everyone for their support in this GB –
Hubble for the initial design, YukTsi for his revisions, and Asilan and EVE for the final rendition of the Mira.
Thank you to FrostyToast for keeping up with the preorders and numbers. I can’t imagine the headache that has been.
Thank you to Zeal for his support and donation of the gold stabilizer set to purchasers of the 57 numbered boards.
Thank you to Limitz for all his support and encouragement when I was ready to stop dealing with this never-ending mess of a group buy.
Thanks to zzyjayfree for finding a manufacturer and dealing with my endless questions and revisions of the Mira.
Thank you to Photoelectric for writing the GB thread and doing the order form for the Mira when I was unable to do so.
Lastly, thank you to Geek Hack and its members for their support of this GB when it seemed like it was sure to fail.
Passing along numbered spot #46 - PM mePmed
- Bottom of the case includes a weight insert made of either stainless steel or polished (not plated) brass
- Bottom of the case includes a weight insert made of either stainless steel or polished (not plated) brass
Will the SS insert be polished as well?
- Bottom of the case includes a weight insert made of either stainless steel or polished (not plated) brass
Will the SS insert be polished as well?
See sample photos. Yes it will be polished.
Won't these brass weights be prone to tarnishing? Or will there be some sort of coating? I vaguely recall someone saying they would be "naked" brass but I might be thinking about someone talking about a brass switch plate.
Won't these brass weights be prone to tarnishing? Or will there be some sort of coating? I vaguely recall someone saying they would be "naked" brass but I might be thinking about someone talking about a brass switch plate.
Really struggling to pick the colour and whether to go with a brass or stainless weight
Lunar Grey looks amazing
Really struggling to pick the colour and whether to go with a brass or stainless weight
Lunar Grey looks amazing
The slight hint of green is whats selling me on it.
Yes, they will be uncoated. Stainless steel won't be tarnishing. Brass will tarnish, but just the very top thin layer, and it's apparently fairly easy to make it shiny again (look up brass polishing, there are various products for it or even natural ingredients). The problem with a brass plate is that there are switches on it, which makes cleaning it difficult. But a bottom weight is easy to remove and polish as often as you wish. I think the tarnished brass look goes well with some colors as well, like black.
Is this still compatible with the Winkeyless B.87 PCB? Is there an option to buy the case without PCB?
Are the prototype colors actual prototypes with the actual colors we will be seeing or are those just renders?
Kind of disappointed in the grey that was settled on as the grey from the interest check didn't seem as green. If it's really supposed to be like that might have to go with black or blue then.
Sent from my iPhone using Tapatalk
Is this still compatible with the Winkeyless B.87 PCB? Is there an option to buy the case without PCB?
not compatible, the usb port is top left on the b.87, the case has a cutout in between the end of the f row and beginning of the navigation keys
gon's tkl pcb may be compatible though
Is this still compatible with the Winkeyless B.87 PCB? Is there an option to buy the case without PCB?
not compatible, the usb port is top left on the b.87, the case has a cutout in between the end of the f row and beginning of the navigation keys
gon's tkl pcb may be compatible though
uh, is it too late to add a second plate to my order?
uh, is it too late to add a second plate to my order?
****IF YOU NEED TO CHANGE YOUR ORDER AND LOST YOUR EDIT LINK, PLEASE SUBMIT A NEW ORDER (BUT ALSO CONTACT Photoelectric (https://geekhack.org/index.php?topic=87310.msg2350928#msg2350928) SO YOUR ORIGINAL ORDER GETS DELETED). FOR ADDRESS CHANGES, YOU CAN ALSO CONTACT Photoelectric****
Is there a pic of the black variant that I'm missing?
http://imgur.com/a/PWJdb (from the Interest Check first post).
Yes, they will be uncoated. Stainless steel won't be tarnishing. Brass will tarnish, but just the very top thin layer, and it's apparently fairly easy to make it shiny again (look up brass polishing, there are various products for it or even natural ingredients). The problem with a brass plate is that there are switches on it, which makes cleaning it difficult. But a bottom weight is easy to remove and polish as often as you wish. I think the tarnished brass look goes well with some colors as well, like black.I actually think that tarnished metal looks great in most cases. I have a copper lamp on my house, it's a dark orange with a green pattern because it's reacting to it's environment. It just shows that the item has an age and a history. It makes the items unique and beautiful.
It's hard to decide the color now. I like silver but I just joined the GB for a silver LZ CLS. 2 silver kb at the same time is a good idea? zzz :rolleyes:yea I'm totally stuck on color choices
I swear unless a keyboard has a purple option Its basically impossible for me to pick a color
Will you lower the value of the package to avoid customs? To like $20.
This please!
Yes. That'd be a godsend. I'm on 21% on board+shipping + processing fees :(
Will you lower the value of the package to avoid customs? To like $20.
This please!
Yes. That'd be a godsend. I'm on 21% on board+shipping + processing fees :(
I'm in if this happens. I'm in Canada, and I'd really rather not have to pay 20-25% of the cost of the board in taxes and brokerage.
Alternatively, I'd also be willing to proxy all Canadian orders if there are enough. Bulk ship to Canada! 👍
before I order,
Who all are the reputable US based keyboard assemblers?
Need a bonafide, trustworthy person.
Trying to avoid another TheChemist disappearing with $800+ of my gear.
Thanks
before I order,Just ship that over to me I'll assemble it for free as long as I can keep it :D
Who all are the reputable US based keyboard assemblers?
Need a bonafide, trustworthy person.
Trying to avoid another TheChemist disappearing with $800+ of my gear.
Thanks
Out of curiosity, whoever has spot 19 would you consider swapping with 46? Me loves 19 <3
Sent from my iPhone using Tapatalk
Out of curiosity, whoever has spot 19 would you consider swapping with 46? Me loves 19 <3
Sent from my iPhone using Tapatalk
Hopefully the person who has #19 will see your post, as he's recently posted on this page :thumb: (Although he might have his personal reasons for wanting #19--I know many people wanted very specific numbers).
before I order,
Who all are the reputable US based keyboard assemblers?
Need a bonafide, trustworthy person.
Trying to avoid another TheChemist disappearing with $800+ of my gear.
Thanks
I'm gonna go ahead and suggest E3E. Pretty standup dude that's pretty committed to the hobby, doubt he'll just leave
This board is 100% original and has some badass colors, at least get this one!Yeah for sure. I mentioned it yesterday that the grey really stands out in my opinion. That being said it's originality is the reason why it's so hard. The CLS reminds me of the 456gt.
This board is 100% original and has some badass colors, at least get this one!Yeah for sure. I mentioned it yesterday that the grey really stands out in my opinion. That being said it's originality is the reason why it's so hard. The CLS reminds me of the 456gt.
Sent from my iPhone using Tapatalk
I had a 456GT up until a few weeks ago when I sold it, and the LZ-CLS might as well be called the LZ-456GT...
This board is 100% original and has some badass colors, at least get this one!Yeah for sure. I mentioned it yesterday that the grey really stands out in my opinion. That being said it's originality is the reason why it's so hard. The CLS reminds me of the 456gt.
Sent from my iPhone using Tapatalk
I had a 456GT up until a few weeks ago when I sold it, and the LZ-CLS might as well be called the LZ-456GT...
I had one a few years ago. I miss it dearly. You had the one in pink right? I was tempted to pm you a few times about it
Sent from my iPhone using Tapatalk
Yes I sold it to someone in Asia. If you're missing the 456GT, the LZ might be good too since it has a better PCB and a removable cable. Just a bit boring compared to the Mira.
I'm so torn between this board and the CLS. I mean with tax returns right around the corner two new boards won't be a bad thing, but I may have to decide between the two :(
Sent from my iPhone using Tapatalk
I'm so torn between this board and the CLS. I mean with tax returns right around the corner two new boards won't be a bad thing, but I may have to decide between the two :(
Sent from my iPhone using Tapatalk
grab both then start saving for the dolphin
I'm so torn between this board and the CLS. I mean with tax returns right around the corner two new boards won't be a bad thing, but I may have to decide between the two :(
Sent from my iPhone using Tapatalk
grab both then start saving for the dolphin
This is my boat right now. GB's like this dont happen that often, while college tuition takes loans. EZPZ decision
Don't make FOMO worse than it already is, yo! :C I'm just glad I don't particularly care for the Dolphin or CLS so I won't feel the buuurn of missing out. :P
Don't make FOMO worse than it already is, yo! :C I'm just glad I don't particularly care for the Dolphin or CLS so I won't feel the buuurn of missing out. :P
Keep telling yourself that pal.
Don't make FOMO worse than it already is, yo! :C I'm just glad I don't particularly care for the Dolphin or CLS so I won't feel the buuurn of missing out. :P
Keep telling yourself that pal.
ZEN. ONE MUST FIND INNER PEACE.
How smooth is the surface finish on the Night Sky Blue prototype board?
What can we expect out of the grey. Will it be similar to the sample posted? With that subtle green?How smooth is the surface finish on the Night Sky Blue prototype board?
The texture is more like a 360C - smooth - not like a cheat or Koala. The LZ-SK or the Ergo board are the closest approximate boards I can think of. Maybe the TGR Jane CE would have the same finish.
What can we expect out of the grey. Will it be similar to the sample posted? With that subtle green?How smooth is the surface finish on the Night Sky Blue prototype board?
The texture is more like a 360C - smooth - not like a cheat or Koala. The LZ-SK or the Ergo board are the closest approximate boards I can think of. Maybe the TGR Jane CE would have the same finish.
Sent from my iPhone using Tapatalk
Any notable differences between the brass and steel weight if I may ask?Brass is heavier for the same size. Will likely sound deeper.
Any notable differences between the brass and steel weight if I may ask?Color and the weight.
Any notable differences between the brass and steel weight if I may ask?
How smooth is the surface finish on the Night Sky Blue prototype board?
The texture is more like a 360C - smooth - not like a cheat or Koala. The LZ-SK or the Ergo board are the closest approximate boards I can think of. Maybe the TGR Jane CE would have the same finish.
Just to confirm, these are PCB mount stabilizers right? and the extra wide slot on the left means we can do 6.25 or 7u?
This is killin me guys. I've trying to pare down my collection and to stop buying expensive boards. But I love this board! :(
Let's talk about how cool it isn't and how I don't need it.
This is killin me guys. I've trying to pare down my collection and to stop buying expensive boards. But I love this board! :(
Let's talk about how cool it isn't and how I don't need it.
Let me know if you find an excuse. I'm trying to find one since the IC has started and failed miserably so far.
This is killin me guys. I've trying to pare down my collection and to stop buying expensive boards. But I love this board! :(
Let's talk about how cool it isn't and how I don't need it.
Let me know if you find an excuse. I'm trying to find one since the IC has started and failed miserably so far.
I'm making slot #3 available — please PM if interested to work out a transfer.
For the first 57 slots for engraving, it's going to be on the square weight of the insert so the only way to see it is if it's opened right?
Also, will the engraving be offered for both steel weights as well as on the brass?
Are there any renders or pictures of prototypes of these?
Thanks.
For the first 57 slots for engraving, it's going to be on the square weight of the insert so the only way to see it is if it's opened right?
Also, will the engraving be offered for both steel weights as well as on the brass?
Are there any renders or pictures of prototypes of these?
Thanks.
Also I had a question, i know in the interest check someone was pitching maybe running another buy (if they could find the dimensions) for a steel/aliminum diffuser replacement instead of the Acrylic diffuser this comes with for those of us not planning to use the RGB. Did anything ever come of that? Or is it still in the works?
For the first 57 slots for engraving, it's going to be on the square weight of the insert so the only way to see it is if it's opened right?
Also, will the engraving be offered for both steel weights as well as on the brass?
Are there any renders or pictures of prototypes of these?
Thanks.
I think the engraving will be on the inside part of the weights. If you order 2 weights, only one will be engraved (your primary selected weight), but yes, you can choose either brass or steel for the engraving.
Will the engraving only be the number or can we also engrave our name or initials on there?
Will the blue version get the "Mira SE" engraved on the back?Yes.
before I order,
Who all are the reputable US based keyboard assemblers?
Need a bonafide, trustworthy person.
Trying to avoid another TheChemist disappearing with $800+ of my gear.
Thanks
Logic would suggest:
- Is there a limit to how many each person can buy?
- How do we buy more than one?
- Can the first 57 have the engraving on more than one?
Can the first 57 have the engraving on more than one?
Will the blue version get the "Mira SE" engraved on the back?Yes.
Logic would suggest:
- Is there a limit to how many each person can buy?
- How do we buy more than one?
- Can the first 57 have the engraving on more than one?
I doubt the answer you'd receive from anyone else would be different; I'll be very surprised if they are.
- No.
- 1 form = 1 keyboard, submit more forms.
- What's the point of having two (for example) 3/57s? Of course you can't.
Is there a limit to how many each person can buy?
How do we buy more than one?
Can the first 57 have the engraving on more than one?
Does the PCB support n-key rollover? It's a necessity for my rhythm games :)
Will the blue version get the "Mira SE" engraved on the back?Yes.
hell yeah
http://i.imgur.com/8egUQah.jpgWill the blue version get the "Mira SE" engraved on the back?Yes.
hell yeah
Anyone for a render or pic of how it looks?
Is only he blue getting an engraving?Will the blue version get the "Mira SE" engraved on the back?Yes.
http://i.imgur.com/8egUQah.jpgWill the blue version get the "Mira SE" engraved on the back?Yes.
hell yeah
Anyone for a render or pic of how it looks?
Is only he blue getting an engraving?Will the blue version get the "Mira SE" engraved on the back?Yes.
Sent from my iPhone using Tapatalk
:thumb:Is only he blue getting an engraving?Will the blue version get the "Mira SE" engraved on the back?Yes.
Sent from my iPhone using Tapatalk
Why would you think that :)
Does the lunar grey have the option to not get diffuser as shown in the pictures?
Also, any word on lowering the amount for customs?
Awesome thanks. With that being said would be be able to buy both an acrylic and aluminum spacer if it's available?Does the lunar grey have the option to not get diffuser as shown in the pictures?
Also, any word on lowering the amount for customs?
The grey board is from the Chinese Group Buy. Once the manufacturer returns from celebrating the Chines New Year I will ask about either an aluminum or stainless spacer.
Awesome thanks. With that being said would be be able to buy both an acrylic and aluminum spacer if it's available?Does the lunar grey have the option to not get diffuser as shown in the pictures?
Also, any word on lowering the amount for customs?
The grey board is from the Chinese Group Buy. Once the manufacturer returns from celebrating the Chines New Year I will ask about either an aluminum or stainless spacer.
Awesome thanks. With that being said would be be able to buy both an acrylic and aluminum spacer if it's available?Does the lunar grey have the option to not get diffuser as shown in the pictures?
Also, any word on lowering the amount for customs?
The grey board is from the Chinese Group Buy. Once the manufacturer returns from celebrating the Chines New Year I will ask about either an aluminum or stainless spacer.
I would love to buy an acrylic diffuser and a stainless steel spacer. that would be awesome if the manufacturer can do it!
Does the PCB support n-key rollover? It's a necessity for my rhythm games :)
The PCB supports 6KRO over USB.
Oh crap, is there any way to get around that? I've heard about PS/2, but not sure about the logistics of using it.
just get 1,8mm. the 234 size isn't compatible with all caps.I believe 2x3x4 LEDs interfere with row 3 of cherry profile, in particular.
Is this interstellar black with stainless steel weight?Show Image(http://i.imgur.com/tBpDOWN.jpg)
before I order,
Who all are the reputable US based keyboard assemblers?
Need a bonafide, trustworthy person.
Trying to avoid another TheChemist disappearing with $800+ of my gear.
Thanks
I haven't been following the threads too much, but just want to make sure if I can assemble the keyboard WITHOUT the acrylic diffurer.
I'm almost sure it can but just wanted a 100% confirmation ;)
I've had issues with gmk and original dyesubs rubbing against 2x3x4.
I haven't been following the threads too much, but just want to make sure if I can assemble the keyboard WITHOUT the acrylic diffurer.
I'm almost sure it can but just wanted a 100% confirmation ;)
The diffuser is part of the MIRA SE case design, the aluminum is cut to include it, so if you don't insert the diffuser, there'll be a gap in the case.
Hmm, strange that I haven't had the same issues. In any event, 1.8mm LEDs seem like a good idea... if they come in colors one wants. I only see them in fairly standard colors, unfortunately. I have a few different 2x3x4 cyans and interesting warm pink ones that I love. But for standard colors, 1.8mm is the way to go now, especially if they fit switches with SIP sockets without falling out easily (I like how 2x3x4 fit tightly into the bottom stem mold).
is 57 some special number for the Mira? Or just a cutoff?
is 57 some special number for the Mira? Or just a cutoff?
ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive? Just curious.
Is there a picture somewhere where I can see the board from the top? I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels. Is anyone here able to make a judgement on that? I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.
Kind of hard to see:Show Image(https://geekhack.org/index.php?action=dlattach;topic=87239.0;attach=158589;image)Show Image(http://i.imgur.com/HCPR5yu.jpg)
ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive? Just curious.
Is there a picture somewhere where I can see the board from the top? I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels. Is anyone here able to make a judgement on that? I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.
Kind of hard to see:Show Image(https://geekhack.org/index.php?action=dlattach;topic=87239.0;attach=158589;image)Show Image(http://i.imgur.com/HCPR5yu.jpg)
ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive? Just curious.
Is there a picture somewhere where I can see the board from the top? I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels. Is anyone here able to make a judgement on that? I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.
Kind of hard to see:Show Image(https://geekhack.org/index.php?action=dlattach;topic=87239.0;attach=158589;image)Show Image(http://i.imgur.com/HCPR5yu.jpg)
ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive? Just curious.
Here's more pictures of the mira https://bbs.wstx.com/forum.php?mod=viewthread&tid=700766&page=1&extra=#pid8857629
I chose steel cause it looks better.
brass with the blue case looks uglyShow Image(http://i.imgur.com/Lcgk2le.jpg)
This is killin me guys. I've trying to pare down my collection and to stop buying expensive boards. But I love this board! :(
Let's talk about how cool it isn't and how I don't need it.
Let me know if you find an excuse. I'm trying to find one since the IC has started and failed miserably so far.
Don't find an excuse! :)
Please buy one!
Is there a picture somewhere where I can see the board from the top? I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels. Is anyone here able to make a judgement on that? I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.
Kind of hard to see:Show Image(https://geekhack.org/index.php?action=dlattach;topic=87239.0;attach=158589;image)Show Image(http://i.imgur.com/HCPR5yu.jpg)
ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive? Just curious.
Here's more pictures of the mira https://bbs.wstx.com/forum.php?mod=viewthread&tid=700766&page=1&extra=#pid8857629
I chose steel cause it looks better.
brass with the blue case looks uglyShow Image(http://i.imgur.com/Lcgk2le.jpg)
It also looks much better in the sample images imo - I think the above photo having terrible lighting isn't helping out.Is there a picture somewhere where I can see the board from the top? I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels. Is anyone here able to make a judgement on that? I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.
Kind of hard to see:Show Image(https://geekhack.org/index.php?action=dlattach;topic=87239.0;attach=158589;image)Show Image(http://i.imgur.com/HCPR5yu.jpg)
ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive? Just curious.
Here's more pictures of the mira https://bbs.wstx.com/forum.php?mod=viewthread&tid=700766&page=1&extra=#pid8857629
I chose steel cause it looks better.
brass with the blue case looks uglyShow Image(http://i.imgur.com/Lcgk2le.jpg)
Keep in mind the brass will look much different after it ages a bit.
Will the rectangular top side of the weight (engraved or not) be polished as well?
Any hints on what the engraving will look like? Just curious, as I am not in the first 57 list.
Link for cosmic pink added to the first post
Here it is so you don't have to go look
This is a prototype for the Chinese GB http://imgur.com/a/zLumM
Selling spot #19.Details in classifieds.$40 US. Paypal+fees
Awaiting mod approval.
Not doing paypal gift.
pm if interested.
I think Black or Silver would be your best bet for Carbon SA. The gray might be a wrong shade due to some amount of olive green in it. You can just view a gray prototype photo in a browser window next to carbon SA photo, and do the same for the blue, to get an idea of how they will mix.
P.S.: but for fun, here are very rough mock-ups. I took the second photograph from this photo album: http://imgur.com/a/N2Onx
and colored the black case. Keep in mind I've not seen MIRA prototype colors in person, so these mockups can well be way off in lightness or shade:
Starlight Blue + Carbon SA: http://i.imgur.com/YrxZsUN.jpg
Lunar Gray + Carbon SA: http://i.imgur.com/NON9Opg.jpg
- estimates - assuming 4.5 kg shipped, obviously variesHeavy baby
Slot 26 pending sale. Thanks everyone for your interest.
Slot 26 sold to poolside. Does anyone know who is maintaining the list of numbers?
FrostyToast maintains the up-to-date list (https://geekhack.org/index.php?topic=70149.msg2345205#msg2345205) of usernames and numbers.
It also looks much better in the sample images imo - I think the above photo having terrible lighting isn't helping out.Is there a picture somewhere where I can see the board from the top? I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels. Is anyone here able to make a judgement on that? I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.
Kind of hard to see:Show Image(https://geekhack.org/index.php?action=dlattach;topic=87239.0;attach=158589;image)Show Image(http://i.imgur.com/HCPR5yu.jpg)
ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive? Just curious.
Here's more pictures of the mira https://bbs.wstx.com/forum.php?mod=viewthread&tid=700766&page=1&extra=#pid8857629
I chose steel cause it looks better.
brass with the blue case looks uglyShow Image(http://i.imgur.com/Lcgk2le.jpg)
Keep in mind the brass will look much different after it ages a bit.Show Image(https://i.imgur.com/0sAddVD.jpg)
color sample with brass weight shown in OP
Slot 26 sold to poolside. Does anyone know who is maintaining the list of numbers?
Slot 26 pending sale. Thanks everyone for your interest.
Whoever got slot 26 i'm slot 29. If you'd like to trade numbers I'd much prefer 26 as currently 29 means nothing to me. However I turn 26 right before this board arrives, and it will be my first TKL and possibly first build if it arrives before the RAMA 65a. being 26 and having my first build/board would actually be a number to mean something.
Slot 26 sold to poolside. Does anyone know who is maintaining the list of numbers?
Noted on the order spreadsheet. I'm keeping an eye on this thread as well. As long as everyone's explicit about what they are doing with their numbers, we're good.
Gotcha sorry about not notifying in thread, Frosty was told immediately and said he updated alreadySlot 26 pending sale. Thanks everyone for your interest.
Whoever got slot 26 i'm slot 29. If you'd like to trade numbers I'd much prefer 26 as currently 29 means nothing to me. However I turn 26 right before this board arrives, and it will be my first TKL and possibly first build if it arrives before the RAMA 65a. being 26 and having my first build/board would actually be a number to mean something.
Did not know you got #29 from zzyjayfree, as it was not posted in the thread (hope you at least messaged FrostyToast about it), but either way as long as one of us knows, it's fine. I've noted that on the spreadsheet I maintain.
Slot 26 pending sale. Thanks everyone for your interest.
Whoever got slot 26 i'm slot 29. If you'd like to trade numbers I'd much prefer 26 as currently 29 means nothing to me. However I turn 26 right before this board arrives, and it will be my first TKL and possibly first build if it arrives before the RAMA 65a. being 26 and having my first build/board would actually be a number to mean something.
Did not know you got #29 from zzyjayfree, as it was not posted in the thread (hope you at least messaged FrostyToast about it), but either way as long as one of us knows, it's fine. I've noted that on the spreadsheet I maintain.
What was the amount we paid for the spots? Looking to sell mine #51
What was the amount we paid for the spots? Looking to sell mine #51
It was a $40 deposit. Nice number, I like it. :)
K pending to eyedrop.
It was a $40 deposit. Nice number, I like it. :)
Yeah, I was pretty excited for this but it just came too late. Figured I'd sell it now with enuf time before payment deadline to someone who will appreciate it more than me.
Photoelectric, I just grab #51 from lol. Could you kindly update your spreadsheet before I fill out the form? Thanks!
Shipping
- customs - please PM me for any customs questions. If anyone has purchased a board from LZ, PCB's from Leeku, or any other board from Korea we will follow similar guidelines.
- the shipper will be DHL 3 - 5 days
- estimates - assuming 4.5 kg shipped, obviously varies
United States - $47
Canada - $46
Australia - $66
Germany - $49
England - $46
Malaysia - $46
France - $46
Russia - ? please PM me
Vietnam - $66
Hong Kong - ?please PM me
Quality check on the boards
-checked at the factory
-placed in the foam insert in the custom "Mira" box
-placed in bubble wrapped bag
-placed in another box and taped shut
-the prototypes were then wrapped in foam and placed in another box for shipping
hello, I have taken over Blackehart's spot #19. I will message Frosty as well thanks.
hello, I have taken over Blackehart's spot #19. I will message Frosty as well thanks.
Posting more MIRA prototype photos for ninja, who's having computer troubles:
http://imgur.com/a/P6DiG
Please note the sand-blasted texture of that prototype brass weight. It was hand-polished as a test. Personally I'm a fan of the sand-blasted texture.
Color accuracy is also not 100%.
Posting more MIRA prototype photos for ninja, who's having computer troubles:
http://imgur.com/a/P6DiG
Please note the sand-blasted texture of that prototype brass weight. It was hand-polished as a test. Personally I'm a fan of the sand-blasted texture.
Color accuracy is also not 100%.
Do we have a payment deadline yet?
im sure interstellar black is just a deep black alu color but.. does anyone have some images of what it looks like as the case? possibly next to other colors offered in this GB?
im sure interstellar black is just a deep black alu color but.. does anyone have some images of what it looks like as the case? possibly next to other colors offered in this GB?
im sure interstellar black is just a deep black alu color but.. does anyone have some images of what it looks like as the case? possibly next to other colors offered in this GB?
I'm not 100% sure if it will be the same finish, but a black color prototype was posted in the IC thread: http://imgur.com/a/PWJdb
im sure interstellar black is just a deep black alu color but.. does anyone have some images of what it looks like as the case? possibly next to other colors offered in this GB?
I'm not 100% sure if it will be the same finish, but a black color prototype was posted in the IC thread: http://imgur.com/a/PWJdb
Oooh okay sweet, thanks! Is that a brass weight on the black case?
Posting more MIRA prototype photos for ninja, who's having computer troubles:
http://imgur.com/a/P6DiG
Please note the sand-blasted texture of that prototype brass weight. It was hand-polished as a test. Personally I'm a fan of the sand-blasted texture.
Color accuracy is also not 100%.
Just a quick question, I accidentally found this youtube video: , and the prototype shown here is in bright red casing. Maybe this was already mentioned in the IC thread but will there be a red version available in future?
Just a quick question, I accidentally found this youtube video, and the prototype shown here is in bright red casing. Maybe this was already mentioned in the IC thread but will there be a red version available in future?
Just a quick question, I accidentally found this youtube video, and the prototype shown here is in bright red casing. Maybe this was already mentioned in the IC thread but will there be a red version available in future?
That was one of the earlier prototypes, not MIRA SE. As far as I know, there are no plans to make any more after this GB. If you really want red, you can always re-anodize a case locally, though that will cost a good deal more money. If you want a good quality red keyboard, you can try looking for a red Duck Orion kit on the Classifieds.
Can you confirm you received my order?
Reddit handle: T-Mootypus
Can you confirm you received my order?
Reddit handle: T-Mootypus
Confirmed.
i was told once by a sage old legend that steel plates are for linear switches and aluminum is for tactile/clicky... fwiw
Ok, can I had a steel plate then to my order? I think I had an aluminum plate originally in there, so I would like both now.
i was told once by a sage old legend that steel plates are for linear switches and aluminum is for tactile/clicky... fwiw
I originally subscribed to this, however my SKCLs feel quite nice on a very bendy alu plate, G80s with Blacks are PCB mount, and at least the 356 Mini was designed to be used with linears without a plate supporting the alphas and an extra flexible PCB.
So yeah, no hard and fast rules.
Ok, can I had a steel plate then to my order? I think I had an aluminum plate originally in there, so I would like both now.
Just a quick question, I accidentally found this youtube video: , and the prototype shown here is in bright red casing. Maybe this was already mentioned in the IC thread but will there be a red version available in future?
Just a quick question, I accidentally found this youtube video: , and the prototype shown here is in bright red casing. Maybe this was already mentioned in the IC thread but will there be a red version available in future?
That is YukTsi - the first prototype.
I think E3E has it.
*slams fist*
Can I get a diameter measurement on the two circles (earth/moon) on the weight insert? I'm working on a little sm'tin-somethin.
Show Image(http://i.imgur.com/tBpDOWN.jpg)
Just to confirm before I pull the trigger, if I want such a look I should get the interstellar with brass weights and not lunar gray right? It looks like there's a tint of green to me :)
Show Image(http://i.imgur.com/tBpDOWN.jpg)
Just to confirm before I pull the trigger, if I want such a look I should get the interstellar with brass weights and not lunar gray right? It looks like there's a tint of green to me :)
Stainess steel weight + lunar gray.
Show Image(http://i.imgur.com/tBpDOWN.jpg)
Just to confirm before I pull the trigger, if I want such a look I should get the interstellar with brass weights and not lunar gray right? It looks like there's a tint of green to me :)
Stainess steel weight + lunar gray.
Thanks :thumb:
Posting more MIRA prototype photos for ninja, who's having computer troubles:
http://imgur.com/a/P6DiG
Please note the sand-blasted texture of that prototype brass weight. It was hand-polished as a test. Personally I'm a fan of the sand-blasted texture.
Color accuracy is also not 100%.
Show Image(http://i.imgur.com/tBpDOWN.jpg)
Just to confirm before I pull the trigger, if I want such a look I should get the interstellar with brass weights and not lunar gray right? It looks like there's a tint of green to me :)
Stainess steel weight + lunar gray.
Thanks :thumb:
Sorry, I edited my post. It should be brass (I asked). That photograph makes it look more silver, but brass is more golden.
Can I get a diameter measurement on the two circles (earth/moon) on the weight insert? I'm working on a little sm'tin-somethin.
The circles gradually evolved to the larger being an"O" the size of the MIRA and the smaller "o" looking more like an apostrophe. The larger one is shrinking slightly, the smaller one is increasing somewhat to be more like binary suns instead of "O'MIRA". Thus I can't give you an exact measurement yet.
No worries :) also, if we want to declare it as a certain amount do we PM someone?
Can I get a diameter measurement on the two circles (earth/moon) on the weight insert? I'm working on a little sm'tin-somethin.
The circles gradually evolved to the larger being an"O" the size of the MIRA and the smaller "o" looking more like an apostrophe. The larger one is shrinking slightly, the smaller one is increasing somewhat to be more like binary suns instead of "O'MIRA". Thus I can't give you an exact measurement yet.
You're talking about the engraving on the top of the board above the arrow keys? I'm looking to do something special with the brass weight insert but I need to make sure the tooling will work for the diameter of the circles.
Assuming that you don't want LED's on anything other than the bottom, is this board just simply soldering the switches and programming the board? How customizable is the programming? Can you program for Volume +/-, etc?
Thank you!
Assuming that you don't want LED's on anything other than the bottom, is this board just simply soldering the switches and programming the board? How customizable is the programming? Can you program for Volume +/-, etc?
Thank you!
Can you confirm that you received my Order?
Reddit username: "DreamFiction_"
I would also like to confirm: for some reason, my Google form link to return for edits is not working and redirects me to the original form. If this editable link could be provided, please PM me~
Assuming that you don't want LED's on anything other than the bottom, is this board just simply soldering the switches and programming the board? How customizable is the programming? Can you program for Volume +/-, etc?
Thank you!
Switches, stabilizers. It will work without programming, but if you want to change the keymap, this is how you can do it:
http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787
If you use Google Chrome to view the page, you can have it auto-translated.
https://translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fkbdlab.co.kr%2Findex.php%3Fmid%3Dboard_sw%26document_srl%3D2702787&edit-text=&act=url
I'm afraid there's no good quality (very color-accurate) photo available for lunar gray :( If I could get my hands on a sample... The photos linked in the OP should give you *some* idea, but I can't confirm whether that's exactly what it will look like in person: http://imgur.com/a/M1NLm
I think the Blue will be a better match to Hydro, especially because the Hydro blue is also on the cool side from the photos I've seen. The Gray is supposed to have some military green to it.
I'm afraid there's no good quality (very color-accurate) photo available for lunar gray :( If I could get my hands on a sample... The photos linked in the OP should give you *some* idea, but I can't confirm whether that's exactly what it will look like in person: http://imgur.com/a/M1NLm
I think the Blue will be a better match to Hydro, especially because the Hydro blue is also on the cool side from the photos I've seen. The Gray is supposed to have some military green to it.
No worries, thank you for the help! Ordering right now and I thought I was done with the questions, but I'm sadly not. Is the "extra PCB" so that you can GET a PCB, or is it literally extra (meaning you get two). I want to order the entire kit.
Thanks again!
Done filling the form :)
The MIRA weight IS the logo :)
The MIRA weight IS the logo :)
I know but I wish "Mira" could have been engraved on the larger circle in the same font used on the front cover.
Pro Tip: Get an extra plate.
1. They are super cheap in this GB (Could easily be double in other GBs)
2. Uses a standard PCB that can be bought later if needed, so you do not need to get it right now, but the plate is unique
Why?
1. If you ever want to resell the board later you can sell it as unbuilt
2. If you ever want to change the layout, or try other switches you can do that without desoldering the old PCB/Plate and just get a PCB and new switches. Two keyboards in one!
Pro Tip: Get an extra plate.
1. They are super cheap in this GB (Could easily be double in other GBs)
2. Uses a standard PCB that can be bought later if needed, so you do not need to get it right now, but the plate is unique
Why?
1. If you ever want to resell the board later you can sell it as unbuilt
2. If you ever want to change the layout, or try other switches you can do that without desoldering the old PCB/Plate and just get a PCB and new switches. Two keyboards in one!
Pro Tip: Get an extra plate.
1. They are super cheap in this GB (Could easily be double in other GBs)
2. Uses a standard PCB that can be bought later if needed, so you do not need to get it right now, but the plate is unique
Why?
1. If you ever want to resell the board later you can sell it as unbuilt
2. If you ever want to change the layout, or try other switches you can do that without desoldering the old PCB/Plate and just get a PCB and new switches. Two keyboards in one!
This may be good advice, but what I wonder is how common is the PCB and where exactly would I get extra Leeku PCBs (elsewhere)?
Pro Tip: Get an extra plate.
1. They are super cheap in this GB (Could easily be double in other GBs)
2. Uses a standard PCB that can be bought later if needed, so you do not need to get it right now, but the plate is unique
Why?
1. If you ever want to resell the board later you can sell it as unbuilt
2. If you ever want to change the layout, or try other switches you can do that without desoldering the old PCB/Plate and just get a PCB and new switches. Two keyboards in one!
This may be good advice, but what I wonder is how common is the PCB and where exactly would I get extra Leeku PCBs (elsewhere)?
Pro Tip: Get an extra plate.
1. They are super cheap in this GB (Could easily be double in other GBs)
2. Uses a standard PCB that can be bought later if needed, so you do not need to get it right now, but the plate is unique
Why?
1. If you ever want to resell the board later you can sell it as unbuilt
2. If you ever want to change the layout, or try other switches you can do that without desoldering the old PCB/Plate and just get a PCB and new switches. Two keyboards in one!
But yeah, having two plates/PCBs is pretty nifty if you want to have two different setups for the same board, though honestly... You're most likely going to end up favoring one over another and so you'll likely see the other one not be used much at that point.
And in OTHER NEWS, we have 10 numbered slots that have not been claimed for whatever reason by people who have paid a deposit during the IC phase.
They will be distributed among those who have joined the Group Buy and do not yet have a number assigned to them. I am using Random.org with all the un-numbered usernames pasted in a column to do this assignment.
All of the assigned numbers from 1 to 57 will be added to the order verification spreadsheet soon.
And in OTHER NEWS, we have 10 numbered slots that have not been claimed for whatever reason by people who have paid a deposit during the IC phase.
They will be distributed among those who have joined the Group Buy and do not yet have a number assigned to them. I am using Random.org with all the un-numbered usernames pasted in a column to do this assignment.
All of the assigned numbers from 1 to 57 will be added to the order verification spreadsheet soon.
And in OTHER NEWS, we have 10 numbered slots that have not been claimed for whatever reason by people who have paid a deposit during the IC phase.
They will be distributed among those who have joined the Group Buy and do not yet have a number assigned to them. I am using Random.org with all the un-numbered usernames pasted in a column to do this assignment.
All of the assigned numbers from 1 to 57 will be added to the order verification spreadsheet soon.
Oh, this is interesting. I was wondering, for those already with a numbered slot, can we swap to another opened number prior to the distribution? Just a thought.
And in OTHER NEWS, we have 10 numbered slots that have not been claimed for whatever reason by people who have paid a deposit during the IC phase.
They will be distributed among those who have joined the Group Buy and do not yet have a number assigned to them. I am using Random.org with all the un-numbered usernames pasted in a column to do this assignment.
All of the assigned numbers from 1 to 57 will be added to the order verification spreadsheet soon.
Is there an updated list of who has what limited spot?
Once invoices goes out, there will be no number changing. It's a complex GB as it is, and the weights will be coming along with the kits from the factory. We have orders from many different countries here. So as to not mess anything up as much as possible, there should be no number swapping until stuff gets delivered.
By the way, during the IC, people did try to get specific numbers, so I don't think many will want to trade anyway.
Here is the link to check your MIRA order as submitted! Please PM me if anything looks wrong. The list is sorted alphabetically by username. Shipping cost is NOT INCLUDED!
>>> CLICK HERE FOR ORDER CHECK LINK <<< (https://docs.google.com/spreadsheets/d/1TCDZcFQ9xTXeYg5rAniPHBbrZ67OtDi7PlLL6u8hcXI/edit?usp=sharing)
A reminder to everyone: 1 PCB is INCLUDED in your kit. "Extra" PCB means you get MORE THAN ONE.
Those who have submitted an order for more than one MIRA kit should get a combined PayPal invoice.
This information will be added to the OP.
Here is the link to check your MIRA order as submitted! Please PM me if anything looks wrong. The list is sorted alphabetically by username. Shipping cost is NOT INCLUDED!
>>> CLICK HERE FOR ORDER CHECK LINK <<< (https://docs.google.com/spreadsheets/d/1TCDZcFQ9xTXeYg5rAniPHBbrZ67OtDi7PlLL6u8hcXI/edit?usp=sharing)
A reminder to everyone: 1 PCB is INCLUDED in your kit. "Extra" PCB means you get MORE THAN ONE.
Those who have submitted an order for more than one MIRA kit should get a combined PayPal invoice.
This information will be added to the OP.
i notice this form is not tracking numbers for the first 57...
Is there an updated list of who has what limited spot?
The numbers 1-57 will be added to the order verification spreadsheet this evening.
Numbered slots have been added to the order verification spreadsheet linked in the OP.
Just saw the price of my invoice... Oh boy. Especially with shipping this will be one expensive keyboard.
Numbered slots have been added to the order verification spreadsheet linked in the OP.
Thank you based gods of RNG! Thank you, Photoelectric, for quick organization!
Congrats! I know you were looking for a number at the last minute. It works out for you in the end! :thumb:
Numbered slots have been added to the order verification spreadsheet linked in the OP.
I don't know, I'm sorry. I'm only helping with the logistics of the ordering part, I don't actually have any executive role in the GB. Hopefully ninjadoc will post about it when he knows the answer.
So do the newly numbered kits all come with Zeal stabs? This is great news, as I would have had to get some for a few custom boards.
now, what about the possibility of a stainless steel "diffuser" ? as an optional add-onRead the comments above, I just asked that as well
sorry if this has been asked before but when will the invoices go out?
Those are just forum designations left-over from the main order spreadsheet. Orange for GH.
...
I have a confirmation from ZealPC that all 57 numbered slot holders will receive the stabilizers :D
If you have a number and did not order a winkeyless board, please PM me whether you intend to use a 7x spacebar or 6.25x spacebar with your MIRA. Winkeyless orders will go with 7x stabilizers, naturally.
So the 57 numbered slot holders get gold screw-in stabilizers?
If anyone that missed out on a number really wants the gold screw-in stabs, Massdrop is running a drop for them for the next day or so. If you miss that one, Zeal is also running a GB for them on his site, though I believe the wait may be a little longer.Wait might be longer but they'd still be here before you get this board
If anyone that missed out on a number really wants the gold screw-in stabs, Massdrop is running a drop for them for the next day or so. If you miss that one, Zeal is also running a GB for them on his site, though I believe the wait may be a little longer.Luckily got myself some stabs the last drop, they look great
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:
https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847
maybe include a few clear plastic washers?
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:
https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847
maybe include a few clear plastic washers?
If it is a TX87 PCB then Zeals screw in stabs did not have a problem with the screws being close to the pads. At least not with a standard layout.
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:
https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847
maybe include a few clear plastic washers?
If it is a TX87 PCB then Zeals screw in stabs did not have a problem with the screws being close to the pads. At least not with a standard layout.
I'd just use a couple layers of teflon (pipe) tape over the stabilizer screws and such for insulation. It's thin, stretchy, and won't interfere with anything.
Numbered slots have been added to the order verification spreadsheet linked in the OP.
Hey photo just wondering if the steel/aluminum spacer still had a shot? I know you said it'd be looked into more after chinese new year, i don't expect it to be something added to the original invoice, but any shot of it still happening during this GB and just receiving another invoice for it along with the shipping for current GB members that decide they want it?
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:
https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847
maybe include a few clear plastic washers?
Numbered slots have been added to the order verification spreadsheet linked in the OP.
Hey photo just wondering if the steel/aluminum spacer still had a shot? I know you said it'd be looked into more after chinese new year, i don't expect it to be something added to the original invoice, but any shot of it still happening during this GB and just receiving another invoice for it along with the shipping for current GB members that decide they want it?
Right now, no.
After the dust settles, maybe.
I do too! But it would be completely fine if it's something done after the fact.Numbered slots have been added to the order verification spreadsheet linked in the OP.
Hey photo just wondering if the steel/aluminum spacer still had a shot? I know you said it'd be looked into more after chinese new year, i don't expect it to be something added to the original invoice, but any shot of it still happening during this GB and just receiving another invoice for it along with the shipping for current GB members that decide they want it?
Right now, no.
After the dust settles, maybe.
I really hope the steel/aluminum spacer is possible.
Thanks for all your hard work Ninja!
And a massive thanks to Photo for squeezing in my last minute order! You're the best!
I'm still stuck between Winkey and Winkeyless...at the moment I went with Winkey, but Winkeyless looks so nice.
Oh shoot, forgot to mention what stab length I wanted for my numbered slot.
Could I go 7u?
Oh shoot, forgot to mention what stab length I wanted for my numbered slot.
Could I go 7u?
Oh shoot, forgot to mention what stab length I wanted for my numbered slot.
Could I go 7u?
winkeyless layout orders get 7u stabs by default
Couple things, when do the invoices have to be paid by? And also just a heads up the invoice states "This is a pre-order and production and shipment is expected to take 12 - 14 days after invoices have been paid" , i'm almost positive you meant 12-14 weeks haha, just wanted to let you know!
Yep :))
LOL PayPal fees.
Couple things, when do the invoices have to be paid by? And also just a heads up the invoice states "This is a pre-order and production and shipment is expected to take 12 - 14 days after invoices have been paid" , i'm almost positive you meant 12-14 weeks haha, just wanted to let you know!
The ones I've listed are accurate, I've checked. I too have gotten shorted over the years, but it's because I was oversimplifying it as 3%.
The ones I've listed are accurate, I've checked. I too have gotten shorted over the years, but it's because I was oversimplifying it as 3%.
I've sent invoices at 4.4% to Asia and I still get shorted (using $ in the UK).
Hello,
Question about the numbered spots. I was under the impression that the $40 deposit paid for the numbered spots would go towards the final price. Is this no longer the case / was never the case?
Thank you
ok, thanks for the clarificationHello,
Question about the numbered spots. I was under the impression that the $40 deposit paid for the numbered spots would go towards the final price. Is this no longer the case / was never the case?
Thank you
That was never the case. It was discussed long ago during the IC process. DrHubble took that money and used it for his own purposes, he was the one who promised for it to be a true deposit. You are getting the engraving and the stabilizers as a donation at this point.
Hello,
Question about the numbered spots. I was under the impression that the $40 deposit paid for the numbered spots would go towards the final price. Is this no longer the case / was never the case?
Thank you
That was never the case. It was discussed long ago during the IC process. DrHubble took that money and used it for his own purposes, he was the one who promised for it to be a true deposit. You are getting the engraving and the stabilizers as a donation at this point.
#43 Paid. Had to make an easy choice MD GMK Plum & RGB Pok3r or this one. It's totally worth it.
#43 Paid. Had to make an easy choice MD GMK Plum & RGB Pok3r or this one. It's totally worth it.
GMK Plum & Mira for me ;D
I'm hoping to sell a few figures before the plum drop finishes so I can grab it also.#43 Paid. Had to make an easy choice MD GMK Plum & RGB Pok3r or this one. It's totally worth it.
GMK Plum & Mira for me ;D
I'm hoping to sell a few figures before the plum drop finishes so I can grab it also.#43 Paid. Had to make an easy choice MD GMK Plum & RGB Pok3r or this one. It's totally worth it.
GMK Plum & Mira for me ;D
From what I can see on our order spreadsheet, we're at 53% of invoices paid so far. All of the invoices have been sent out.
Damn.. just missed it :(
If anyone changes his mind and wants to sell me his order, please PM me.
I haven't paid yet.
Someone can take my order if they want since I don't have the funds anymore :thumb:
I haven't paid yet.
Someone can take my order if they want since I don't have the funds anymore :thumb:
What's your order? I don't even see it on the Spreadsheet under 'aurora'
I haven't paid yet.
Someone can take my order if they want since I don't have the funds anymore :thumb:
What's your order? I don't even see it on the Spreadsheet under 'aurora'
Maybe a troll attempt? There's no order associated with that username or e-mail.
Why would I attempt to troll lol? I signed up using my reddit account cvze not my geekhack account.
Not really an update, but since it's been quiet, I thought I'd share that over 70% of invoices have been paid so far, according to our order spreadsheet. ninjadoc is traveling due to a family health situation and doesn't have regular access to a computer until he returns by next week, but I've been passing along any questions I see asked here.
Everybody pay your invoices and lets get this show on the road
Everybody pay your invoices and lets get this show on the road
Trying to pay some other invoices first, PAX and AB hotels on top of my Switch preorder being charged and GBs have made this a fun week.
I'll get the payment in by the deadline, though.
Everybody pay your invoices and lets get this show on the road
Trying to pay some other invoices first, PAX and AB hotels on top of my Switch preorder being charged and GBs have made this a fun week.
I'll get the payment in by the deadline, though.
At least you're from Boston... flying in from Arizona for PAX :(
March 6 is the payment deadline. We're at 75% paid so far.
Everyone who ordered has to pay by the deadline. Unpaid orders will be cancelled. That's how group buys work. After payment deadline, collected funds are transferred to manufacturer along with the summaries of parts to produce and an order is placed to have those parts made.
Everybody pay your invoices and lets get this show on the road
Trying to pay some other invoices first, PAX and AB hotels on top of my Switch preorder being charged and GBs have made this a fun week.
I'll get the payment in by the deadline, though.
Everybody pay your invoices and lets get this show on the road
Trying to pay some other invoices first, PAX and AB hotels on top of my Switch preorder being charged and GBs have made this a fun week.
I'll get the payment in by the deadline, though.
At least you're from Boston... flying in from Arizona for PAX :(
I'm guessing you have only one con to pay for this month, though. Two weeks after PAX is Anime Boston and my friends left it to me to front the money for the hotel rooms for both cons :-\. Gonna bust some kneecaps if they don't pay up :))
Maybe I'll run into ya at PAX?
A terrible thing to say, but I've my fingers crossed for a damaged one in the classifieds once they ship.
Everyone who ordered has to pay by the deadline. Unpaid orders will be cancelled. That's how group buys work. After payment deadline, collected funds are transferred to manufacturer along with the summaries of parts to produce and an order is placed to have those parts made.
yeah, what i am asking is what % is MOQ? or did we already hit that with 75%
I hope I am not asking a stupid question, this is my first build and this is probably not the best place for this post, new to geekhack. What kind of stabilizers can I put on this keyboard, it appears that on the initial page that cherry stabilizers are being used? Can Costar stabs be used? Also I am assuming to purchase plate mounted switches. Thank you.
I hope I am not asking a stupid question, this is my first build and this is probably not the best place for this post, new to geekhack. What kind of stabilizers can I put on this keyboard, it appears that on the initial page that cherry stabilizers are being used? Can Costar stabs be used? Also I am assuming to purchase plate mounted switches. Thank you.
Unpaid orders will be cancelled--there are no "slots" (since there's no MoQ).
There are 21 unpaid invocies - pay up if you still want itn.
UPDATE: all the unpaid orders have been cancelled. The order verification spreadsheet has been updated to include only the paid-for orders. It is now fully alphabetized by username.
How many people didn't pay?
Sent from my iPhone using Tapatalk
Is it possible to still get in if we pay immediately? Sry for the inconvenience!!! :confused:Also curious...
Is it possible to remove all the extra rows (128-1003)? :))
Also curious...
Also curious...
I'm sorry, orders are done at this point. Already tallying everything up to place an order with the factory that will be making these kits.
Since payment was due today, I would be willing to buy an unpaid spot.
Doubt it but, any special numbered ones unpaid?Pretty sure they were all paid, but if not I believe they were going to be raffled off.
Doubt it but, any special numbered ones unpaid?
A numbered slot will not be available, unfortunately.
Ahhh I can't wait for this to get going!!Same, Gonna make it special and use Zealistotles for my build
Ahhh I can't wait for this to get going!!Same, Gonna make it special and use Zealistotles for my build
What didn't you like about the 67g zealios?Ahhh I can't wait for this to get going!!Same, Gonna make it special and use Zealistotles for my build
Still trying to decide which switches I'm going to use. Got some mod samplers the other day and really enjoying the mod-m - was a bit disappointed with Zealios 67g on my last build. Thinking I may go the lubed mod-m route, but not completely sure yet. I do know I need to order me some Zeal stabs though :D
What didn't you like about the 67g zealios?Ahhh I can't wait for this to get going!!Same, Gonna make it special and use Zealistotles for my build
Still trying to decide which switches I'm going to use. Got some mod samplers the other day and really enjoying the mod-m - was a bit disappointed with Zealios 67g on my last build. Thinking I may go the lubed mod-m route, but not completely sure yet. I do know I need to order me some Zeal stabs though :D
There would have been a raffle for any numbered slots that would be left unpaid, but there was no need for it after all.
There would have been a raffle* for any numbered slots that would be left unpaid, but there was no need for it after all.
:(
What didn't you like about the 67g zealios?Ahhh I can't wait for this to get going!!Same, Gonna make it special and use Zealistotles for my build
Still trying to decide which switches I'm going to use. Got some mod samplers the other day and really enjoying the mod-m - was a bit disappointed with Zealios 67g on my last build. Thinking I may go the lubed mod-m route, but not completely sure yet. I do know I need to order me some Zeal stabs though :D
To be honest, they weren't as tactile as I expected. For background, I had installed them on a MiniVan with DSA key caps. I have recently tried out Zealios 67g on ZZ96 with GMK caps that I liked better than on my MiniVan, however I'm just cautious of using them and not enjoying them. For me, the bump on the mod switches, while a bit more scratchy, is quite a bit more pronounced. I feel like they will be great lubed (I just don't have any at the moment to test out).
I'm going to do lubed ergo clears for the Mira. I don't really care for Zealios; the stems are a bit too wobbly for my liking. I am going to try some of Zeal's screw-in stabs though.Ye I got my stabs bagged and ready, look great and will look nice with clear key housing also
Sad I missed this. Willing to buy someone's spot or if the GB runner could graciously "find" me one, I can pay upfront and would super appreciative to anyone willing to help me out.
Sad I missed this. Willing to buy someone's spot or if the GB runner could graciously "find" me one, I can pay upfront and would super appreciative to anyone willing to help me out.
Please note the bold-font notice in the first post about buying or selling GB slots, for reference.
I'm going to do lubed ergo clears for the Mira. I don't really care for Zealios; the stems are a bit too wobbly for my liking. I am going to try some of Zeal's screw-in stabs though.
I'm going to do lubed ergo clears for the Mira. I don't really care for Zealios; the stems are a bit too wobbly for my liking. I am going to try some of Zeal's screw-in stabs though.
$40 for a set of stabs? Hard pass. That's just daylight robbery at that price point.
I'm glad Zeal is supplying some for this GB, because there is no way I'm buying a set @ retail. That markup is just insane.
I'm going to do lubed ergo clears for the Mira. I don't really care for Zealios; the stems are a bit too wobbly for my liking. I am going to try some of Zeal's screw-in stabs though.
$40 for a set of stabs? Hard pass. That's just daylight robbery at that price point.
I'm glad Zeal is supplying some for this GB, because there is no way I'm buying a set @ retail. That markup is just insane.
$40 for some nice gold-plated stabs is insane but $400 for a keyboard is perfectly ok? :))
I'm going to do lubed ergo clears for the Mira. I don't really care for Zealios; the stems are a bit too wobbly for my liking. I am going to try some of Zeal's screw-in stabs though.
$40 for a set of stabs? Hard pass. That's just daylight robbery at that price point.
I'm glad Zeal is supplying some for this GB, because there is no way I'm buying a set @ retail. That markup is just insane.
$40 for some nice gold-plated stabs is insane but $400 for a keyboard is perfectly ok? :))
I'm not sure if my address will be the same by the ship date. If anything changes when the latest I could change it?
Not sure if this has been answered but will there be extras?
Not sure if this has been answered but will there be extras?
Is it too late to request a color change at this point?
Is it too late to request a color change at this point?
Only if it's the color of anodized aluminum (and ASAP). The list of parts has already been sent to the manufacturer, but color change can be still accommodated within a short window of time (nothing like aluminum plate -> steel plate, however). Send me a PM with what you're looking to change.
UPDATE :)
I got some MIRA prototype case tops today from ninjadoc for photographing purposes (since my potato is a bit better :) )
Here's a color-calibrated photo album that shows Night Sky Blue (medium blue-gray with purple tinge) and Lunar Gray (medium-dark gray with a tint of military green):
http://imgur.com/a/Ni2h1
Remember that these are for color reference only. Anodized aluminum is subject to glare, especially indoors, and so brightness level varies depending on angle, etc. The blue is actually a medium blue (not a light blue, nor dark blue).
The first set of photographs is taken next to a window with very overcast (snowing heavily now) light. The second set is taken under "full spectrum" CFL bulbs. I've also included some common GMK keycap colors at the end next to the tops, for reference. The last two photos show original Cherry classic beige doubleshots next to both top colors.
The blue is more shimmery and reflective. The gray is more matte. The surface texture is quite smooth for both, fine grain.
. . .
Shipping invoices will hopefully start going out soon--I hope within a week.
So glad I went with the Lunar Grey - looks out of this world
So glad I went with the Lunar Grey - looks out of this world
SICK PUN
o/\o
UPDATE :)
I got some MIRA prototype case tops today from ninjadoc for photographing purposes (since my potato is a bit better :) )
Here's a color-calibrated photo album that shows Night Sky Blue (medium blue-gray with purple tinge) and Lunar Gray (medium-dark gray with a tint of military green):
http://imgur.com/a/Ni2h1
Remember that these are for color reference only. Anodized aluminum is subject to glare, especially indoors, and so brightness level varies depending on angle, etc. The blue is actually a medium blue (not a light blue, nor dark blue).
The first set of photographs is taken next to a window with very overcast (snowing heavily now) light. The second set is taken under "full spectrum" CFL bulbs. I've also included some common GMK keycap colors at the end next to the tops, for reference. The last two photos show original Cherry classic beige doubleshots next to both top colors.
The blue is more shimmery and reflective. The gray is more matte. The surface texture is quite smooth for both, fine grain.
. . .
Shipping invoices will hopefully start going out soon--I hope within a week.
So glad I went with the Lunar Grey - looks out of this worldIt's from Moon :)
I'm the only one that got a silver bottom and black top. Kinda nervous on how it'll look
Still in progress.
As soon as I have some pictures I will post them.
I'm still here - just checking on production.
Still in progress.
As soon as I have some pictures I will post them.
I'm still here - just checking on production.
Anyone has high definition photo of the earth? I only found CGI shots!
Anyone has high definition photo of the earth? I only found CGI shots!
Search "blue marble" on Google and you'll find plenty.
Here are two really good ones, IMO:
8000 x 8000:
https://www.nasa.gov/sites/default/files/images/618486main_earth_full.jpg (https://www.nasa.gov/sites/default/files/images/618486main_earth_full.jpg)
10800 x 10800:
https://eoimages.gsfc.nasa.gov/images/imagerecords/84000/84214/bluemarble_2014090_xlrg.jpg (https://eoimages.gsfc.nasa.gov/images/imagerecords/84000/84214/bluemarble_2014090_xlrg.jpg)
Anyone has high definition photo of the earth? I only found CGI shots!
Search "blue marble" on Google and you'll find plenty.
Here are two really good ones, IMO:
8000 x 8000:
https://www.nasa.gov/sites/default/files/images/618486main_earth_full.jpg (https://www.nasa.gov/sites/default/files/images/618486main_earth_full.jpg)
10800 x 10800:
https://eoimages.gsfc.nasa.gov/images/imagerecords/84000/84214/bluemarble_2014090_xlrg.jpg (https://eoimages.gsfc.nasa.gov/images/imagerecords/84000/84214/bluemarble_2014090_xlrg.jpg)
They must have used a fisheye lens to take those. The Earth looks like it's round in those photos.
Anyone has high definition photo of the earth? I only found CGI shots!
Search "blue marble" on Google and you'll find plenty.
Here are two really good ones, IMO:
8000 x 8000:
https://www.nasa.gov/sites/default/files/images/618486main_earth_full.jpg (https://www.nasa.gov/sites/default/files/images/618486main_earth_full.jpg)
10800 x 10800:
https://eoimages.gsfc.nasa.gov/images/imagerecords/84000/84214/bluemarble_2014090_xlrg.jpg (https://eoimages.gsfc.nasa.gov/images/imagerecords/84000/84214/bluemarble_2014090_xlrg.jpg)
They must have used a fisheye lens to take those. The Earth looks like it's round in those photos.
The second one looks circular to me, but the first looks a little flattened at the poles as they really are.
I have super eyes, and I have 4 of them.
Anyone has high definition photo of the earth? I only found CGI shots!
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
FYI, any order sales/transfers MUST be confirmed with ninjadoc BEFORE they happen, not after.
This is for PayPal protection and consistency. The original sale contract is between the original buyer and ninjadoc. If you wish to transfer your spot and find a buyer, please contact ninjadoc or photoelectric (https://geekhack.org/index.php?topic=87310.msg2361273#msg2361273), and ninja can do the refund/invoice properly. Please don't buy or sell any spots directly from sellers/buyers.
Am I understanding this correctly, winkeyless is no longer going to be supported?
Sent from my SM-G955U using Tapatalk
I see sorry about my confusion.Am I understanding this correctly, winkeyless is no longer going to be supported?
Sent from my SM-G955U using Tapatalk
He meant the compatibility with an alternative PCB: A.87 which is from winkeyless.kr -- not the winkeyless layout. The 84/86-key layout with 7x spacebar and 1.5x modifiers is still supported with the TX87 PCB that's included in this group buy. Ninja hoped to make the case compatible with more PCB types for those who were interested in that.
Ninja's computer's having trouble again :( I was hoping he'd post an update himself. From what I know, everything should be in order now in terms of various kinks being ironed out in the design. I don't know if the delay in production so far will result in a delivery delay compared to the estimated dates given originally--hopefully not. As ninja had posted, supposedly the factory is pretty quick with the production.
They were sorting out prototype design issues--as ninja had posted, there were attempts to make it compatible with more PCBs, which involved some internal changes and such. Hence the delay. But again, it doesn't mean there will be a delay in the final delivery time compared to the estimate (which was up to the end of June for delivery).
Zeal said on Reddit that you should be getting v2 of the stabs.They were sorting out prototype design issues--as ninja had posted, there were attempts to make it compatible with more PCBs, which involved some internal changes and such. Hence the delay. But again, it doesn't mean there will be a delay in the final delivery time compared to the estimate (which was up to the end of June for delivery).
Know sure if youd be able to answer Photo but since this is dropping mid-end june will we be getting the R6 zeal stabs with it that are dropping then? Wondering if I should go in for the R6 GB.
Zeal said on Reddit that you should be getting v2 of the stabs.They were sorting out prototype design issues--as ninja had posted, there were attempts to make it compatible with more PCBs, which involved some internal changes and such. Hence the delay. But again, it doesn't mean there will be a delay in the final delivery time compared to the estimate (which was up to the end of June for delivery).
Know sure if youd be able to answer Photo but since this is dropping mid-end june will we be getting the R6 zeal stabs with it that are dropping then? Wondering if I should go in for the R6 GB.
Sent from my Nexus 6P using Tapatalk
Does anyone know if we're getting the small or large fillet for the top of the case? The small looks so much better...
(Also, the logo will be modified from the above prototype to separate the double-star symbol from the name a bit and change the size of the circles, so it looks less like O'MIRA).
(Attachment Link)
I sincerely hope what we get is closer to OP as well as that's my preference too (and what I paid for). Hard to tell from that mockup though, so we'll wait and see. Still excited, but do hope we get the same bezels as OP.(Attachment Link)
damn.. I like the prototypes in op but not feeling the new ticker bezels here. is this the final version? seems like in OP the A87 PCB compatibility was dropped and it sounds like the wider bezels had been to try to accommodate for that bigger pcb?
I hope ninja can answer it better, but the bezel is supposed to be just slightly thicker than those prototypes, not significantly thicker. For structural integrity. I picked that image to show the tweak to the logo. (I'm not involved in the actual communication with the CAD person nor the factory, I'm just passing on what know).Makes sense. That image didn't look significantly wider, so not too worried.
Does anyone know if we're getting the small or large fillet for the top of the case? The small looks so much better...
The case bezel will be slightly wider on the outer edges than on this prototype, but the curves will be basically like this, with the outer edge being smoothly rounded:Show Image(http://i.imgur.com/bJABe0L.jpg)Show Image(http://i.imgur.com/vNxXyxd.jpg)
Hopefully those photos answer your question?
(Also, the logo will be modified from the above prototype to separate the double-star symbol from the name a bit and change the size of the circles, so it looks less like O'MIRA).
(Attachment Link)
(Attachment Link)
That's a very big difference. Why wasn't this addressed before payment, and why are we only finding out now?
(I know it's Ninja that manages this, so that's more directed towards him.)
I hope ninja can answer it better, but the bezel is supposed to be just slightly thicker than those prototypes, not significantly thicker. For structural integrity. I picked that image to show the tweak to the logo. (I'm not involved in the actual communication with the CAD person nor the factory, I'm just passing on what know).
How did the logo get changed?
I don't see a difference... :x
Thanks for clarification! :)How did the logo get changed?
I don't see a difference... :x
There's just a separation now between the logo and the word, and the size of the double star circles was tweaked slightly. It's a small change, but enough to not look like "O'MIRA" anymore.
Once again, the "changes" are supposed to be minor tweaks to improve the overall design (structural integrity, for example). They are not "very big differences". You are not even seeing the final product, so don't panic.
i agree with xondat on this one. that new render looks like the "tweaks" have changed more than just the logo. were these changes made for structural integrity, or to accommodate the b.87 pcb? changes like this should not be happening so last-minute, especially without input of everyone who has already paid.
ninja's absence has been a bit unsettling through this whole process also. where is the man behind the curtain?
Is anybody looking to transfer their spot?
(Attachment Link)
That's a very big difference. Why wasn't this addressed before payment, and why are we only finding out now?
(I know it's Ninja that manages this, so that's more directed towards him.)
i agree with xondat on this one. that new render looks like the "tweaks" have changed more than just the logo. were these changes made for structural integrity, or to accommodate the b.87 pcb? changes like this should not be happening so last-minute, especially without input of everyone who has already paid.
ninja's absence has been a bit unsettling through this whole process also. where is the man behind the curtain?
i agree with xondat on this one. that new render looks like the "tweaks" have changed more than just the logo. were these changes made for structural integrity, or to accommodate the b.87 pcb? changes like this should not be happening so last-minute, especially without input of everyone who has already paid.
ninja's absence has been a bit unsettling through this whole process also. where is the man behind the curtain?
I understand my absence is unsettling. I'm not going to make excuses but I now understand the lack of communication from leaders of group buys. If you have nothing to say or you don't like what you would say then you find it better to say nothing at all.
Once again, the "changes" are supposed to be minor tweaks to improve the overall design (structural integrity, for example). They are not "very big differences". You are not even seeing the final product, so don't panic.
I can't help but feel there was a bit of "bait and switch" here unfortunately.
Once again, the "changes" are supposed to be minor tweaks to improve the overall design (structural integrity, for example). They are not "very big differences". You are not even seeing the final product, so don't panic.
I can't help but feel there was a bit of "bait and switch" here unfortunately.Show Image(http://i.imgur.com/jKT1UxE.png)
This was posted in the OP.Show Image(http://i.imgur.com/XC8ROnb.jpg)
Posted on March 31st.Show Image(http://i.imgur.com/xW20KiL.jpg)
New bezel.
The revised logo looks great, but the bezel is a massive disappointment (as the thinness was a massive positive for me). I hope its identical to those color accurate pictures.
If I can't spot the difference does it mean I'm half blind :eek:same, im very confused
And here I liked the O'Mira :(
RIP
And here I liked the O'Mira :(
RIP
And here I liked the O'Mira :(
RIP
It still lives on in our hearts <3
And here I liked the O'Mira :(
RIP
And here I liked the O'Mira :(
RIP
What is dead may never die, but rises again harder and strongeronly in our memories
And here I liked the O'Mira :(
RIP
What is dead may never die, but rises again harder and strongeronly in our memories
or in chynaShow Image(http://i.imgur.com/4hWTymL.jpg)
That is what I want to know - the feeling about the logo - so please comment away.Hey ninjadoc, any word on how long production will be pushed back?
That is what I want to know - the feeling about the logo - so please comment away.Hey ninjadoc, any word on how long production will be pushed back?
Sent from my Nexus 6P using Tapatalk
That is what I want to know - the feeling about the logo - so please comment away.
That is what I want to know - the feeling about the logo - so please comment away.
Hmmm, I like the logo tweak!
However, will the size ratio between the small and big circles the same with the weight and that new logo?
I would prefer consistency.
I like the new logo.As do I. Extra white space is not a bad thing
Thanks for the indepth update ninjadoc! I think you, Photoelectric, and any others involved huge been doing a great job with this GB. Let's not forget how the Mira almost became a dead project but miraculously was revived 🙂. Also I'm all for the updated logo, and don't really mind the very insignificant dimension change (although thinner does seem to be more aesthetically pleasing but 1 mm per side is barely noticeable.)
Thank you for all your hard work and hopefully we'll see the end to the GB in the near future!
Honestly I'm a big fan of the logo and wish it was more prominent. If not the name wish the planets were a little larger.
Honestly I'm a big fan of the logo and wish it was more prominent. If not the name wish the planets were a little larger.
Calls the Mira binary star system planets :(
Honestly I'm a big fan of the logo and wish it was more prominent. If not the name wish the planets were a little larger.
Calls the Mira binary star system planets :(
For shame.
Thanks for the indepth update ninjadoc! I think you, Photoelectric, and any others involved huge been doing a great job with this GB. Let's not forget how the Mira almost became a dead project but miraculously was revived 🙂. Also I'm all for the updated logo, and don't really mind the very insignificant dimension change (although thinner does seem to be more aesthetically pleasing but 1 mm per side is barely noticeable.)
Thank you for all your hard work and hopefully we'll see the end to the GB in the near future!
For what it's worth, I like the logo tweak.
Will the weight on the back also be revised to reflect the new proportions?
I liked O'Mira. Made it seem like it was the world's first Irish custom keyboard. Celctic custom. Custom.
I liked O'Mira. Made it seem like it was the world's first Irish custom keyboard. Celctic custom. Custom.
You won't notice a difference that will bother you.
I liked O'Mira. Made it seem like it was the world's first Irish custom keyboard. Celctic custom. Custom.
You won't notice a difference that will bother you.
He's not participating in the GB ;) (But I think that was a joke anyway!)
just saw the OP update. wondering if people still can't see this bezel difference:Show Image(http://i.imgur.com/Fg0xDk4.png)
really happy MIRA is returning to smaller bezels. thanks Ninjadoc.
just saw the OP update. wondering if people still can't see this bezel difference:Show Image(http://i.imgur.com/Fg0xDk4.png)
really happy MIRA is returning to smaller bezels. thanks Ninjadoc.
I do notice it here now. But you also need to keep in mind comparing these two pictures is deceptive and makes the difference look larger then it actually would be. The one on the left is taken from a left angle which can deceive the eye and show the right side of the bezel as much smaller when comparing it to a front on view, especially a front view that seems to be taken from closer up then the other one, which also makes it look bigger. So while I can now notice it, i'd still wager theres barely any difference.
just saw the OP update. wondering if people still can't see this bezel difference:Show Image(http://i.imgur.com/Fg0xDk4.png)
really happy MIRA is returning to smaller bezels. thanks Ninjadoc.
I do notice it here now. But you also need to keep in mind comparing these two pictures is deceptive and makes the difference look larger then it actually would be. The one on the left is taken from a left angle which can deceive the eye and show the right side of the bezel as much smaller when comparing it to a front on view, especially a front view that seems to be taken from closer up then the other one, which also makes it look bigger. So while I can now notice it, i'd still wager theres barely any difference.
is this deceptive too?Show Image(http://i.imgur.com/WM9itHt.png)
Here's my attempt to overlay the older pic from @photoelectric and the latest pic:
(Attachment Link)
Frankly I liked the thinner bezels, but if tehre's no other way...
Here's my attempt to overlay the older pic from @photoelectric and the latest pic:
(Attachment Link)
Frankly I liked the thinner bezels, but if tehre's no other way...
EVE, the one manufacturing the Mira,didn't care for the wide body design and I agreed so we've returned to the the prototype everyone's seen and made slight
adjustment to the inner dimensions to improve the TX87 fit. The NERD, B-fake, and Leeku's alps PCB's will also fit.
From the update post - which is the second post in the thread.
THIN bezels!
The wide body Mira only exists as a prototype and will not be produced at this time.
O'Mira <3
That is what I want to know - the feeling about the logo - so please comment away.Hey ninjadoc, any word on how long production will be pushed back?
Sent from my Nexus 6P using Tapatalk
I'll get an idea in the next day or so and let everyone know
That is what I want to know - the feeling about the logo - so please comment away.Hey ninjadoc, any word on how long production will be pushed back?
Sent from my Nexus 6P using Tapatalk
I'll get an idea in the next day or so and let everyone know
Hey Ninja, did you ever get an update on the revised timeline?
Unfortunately my car was hit in a hit and run and my insurance company is making me pay the deductible to get it fixed so I'm looking to give my spot to someone else. My spot is #40 on the sheet (Gray WK top, gray bottom, silver plate, steel weight). PM me if you want it and we'll sort it out with Ninja.
Unfortunately my car was hit in a hit and run and my insurance company is making me pay the deductible to get it fixed so I'm looking to give my spot to someone else. My spot is #40 on the sheet (Gray WK top, gray bottom, silver plate, steel weight). PM me if you want it and we'll sort it out with Ninja.
Very sorry about your troubles, hope you're okay yourself.
hey everyone, looking to see if anyone wants to take over my order. The Moon keyboard is much more my style and has colors closer to the ones i'm looking for. I wish I could get both these boards but I just don't have the money for it. Please pm me so we can arrange this with ninjadoc. My order details:
Limited Edition # 29
Layout: WK
Top: Gray
Bottom: Gray
Plate : Gray + Extra Black plate
Weight: Brass + Extra Steel weight
hey everyone, looking to see if anyone wants to take over my order. The Moon keyboard is much more my style and has colors closer to the ones i'm looking for. I wish I could get both these boards but I just don't have the money for it. Please pm me so we can arrange this with ninjadoc. My order details:
Limited Edition # 29
Layout: WK
Top: Gray
Bottom: Gray
Plate : Gray + Extra Black plate
Weight: Brass + Extra Steel weight
Damn I really just want the number and not the slot haha. If you could transfer just the plate I would be interested.
hey everyone, looking to see if anyone wants to take over my order. The Moon keyboard is much more my style and has colors closer to the ones i'm looking for. I wish I could get both these boards but I just don't have the money for it. Please pm me so we can arrange this with ninjadoc. My order details:
Limited Edition # 29
Layout: WK
Top: Gray
Bottom: Gray
Plate : Gray + Extra Black plate
Weight: Brass + Extra Steel weight
Damn I really just want the number and not the slot haha. If you could transfer just the plate I would be interested.
Haha it is a solid number, actually the designer of "the moon" keyboards original number for this, I like it because it's how many years after NASAs creation that they finally landed on the moon
Sent from my iPhone using Tapatalk
hey everyone, looking to see if anyone wants to take over my order. The Moon keyboard is much more my style and has colors closer to the ones i'm looking for. I wish I could get both these boards but I just don't have the money for it. Please pm me so we can arrange this with ninjadoc. My order details:
Limited Edition # 29
Layout: WK
Top: Gray
Bottom: Gray
Plate : Gray + Extra Black plate
Weight: Brass + Extra Steel weight
Damn I really just want the number and not the slot haha. If you could transfer just the plate I would be interested.
Haha it is a solid number, actually the designer of "the moon" keyboards original number for this, I like it because it's how many years after NASAs creation that they finally landed on the moon
Sent from my iPhone using Tapatalk
Well maybe we can get photoE to transfer me the number and extra plate.
Anyone have any thoughts on the lunar Grey with SA camping? Trying to figure out what to have ready when it comes!Not a fan of SA Camping, not saying it wont look good but not the colors for me.
Sent from my SM-G955U using Tapatalk
If you're not used to the angle some of these alu boards come at, SA is a KILLER. Big part of why I don't like it.
If you're not used to the angle some of these alu boards come at, SA is a KILLER. Big part of why I don't like it.
Mira is an 8 degree board, which is basically the most shallow angle found in angled customs. Shouldn't be bad I wouldn't think.
If you're not used to the angle some of these alu boards come at, SA is a KILLER. Big part of why I don't like it.
Mira is an 8 degree board, which is basically the most shallow angle found in angled customs. Shouldn't be bad I wouldn't think.
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
You still have your spot?
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
You still have your spot?
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
You still have your spot?
No, his spot has been transferred already. But this one might still be available:
https://geekhack.org/index.php?topic=87310.msg2429803#msg2429803
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
You still have your spot?
No, his spot has been transferred already. But this one might still be available:
https://geekhack.org/index.php?topic=87310.msg2429803#msg2429803
I meant to edit that...
Another driver thankfully came forward and admitted fault for the accident so I still have keeb money for this buy
So... Are we in production yet? Sorry, that wasn't clear to me
Any idea what that means for delivery dates?So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
this is starting to get a little frustrating. why are we not getting more updates as things happen? everyone has paid. this is not the time to make changes to the design, just get the order in and update us on production.
So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
this is starting to get a little frustrating. why are we not getting more updates as things happen? everyone has paid. this is not the time to make changes to the design, just get the order in and update us on production.
I've been asking for weeks now for a revised timeline and have been told it's coming but am still waiting. Starting to get a bit frustrated as well. I know there's a bit of delay due to unforseen circumstances, which is fine, however I would like to know what this means in terms of delivery date.So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
this is starting to get a little frustrating. why are we not getting more updates as things happen? everyone has paid. this is not the time to make changes to the design, just get the order in and update us on production.
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
You still have your spot?
No, his spot has been transferred already. But this one might still be available:
https://geekhack.org/index.php?topic=87310.msg2429803#msg2429803
I've been asking for weeks now for a revised timeline and have been told it's coming but am still waiting. Starting to get a bit frustrated as well. I know there's a bit of delay due to unforseen circumstances, which is fine, however I would like to know what this means in terms of delivery date.So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
this is starting to get a little frustrating. why are we not getting more updates as things happen? everyone has paid. this is not the time to make changes to the design, just get the order in and update us on production.
Sent from my Nexus 6P using Tapatalk
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
You still have your spot?
No, his spot has been transferred already. But this one might still be available:
https://geekhack.org/index.php?topic=87310.msg2429803#msg2429803
This is so difficult haha. I really dislike the #40...
Speaking of PCBs, does the PCB that comes with this support Holtites?
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
You still have your spot?
No, his spot has been transferred already. But this one might still be available:
https://geekhack.org/index.php?topic=87310.msg2429803#msg2429803
This is so difficult haha. I really dislike the #40...
I'll take the numbered weight haha
Looking to sell my spot, #121 on the spreadsheet. If you're lazy, it's WKL Blue/Blue/Silver Plate/SS Plate/Brass Weight/SS Weight (numbered #57). I paid $65 for the #57 and $566 for the rest. PM me.
You still have your spot?
No, his spot has been transferred already. But this one might still be available:
https://geekhack.org/index.php?topic=87310.msg2429803#msg2429803
This is so difficult haha. I really dislike the #40...
I'll take the numbered weight haha
That spot is not available--i_need_a_bath posted that he will be keeping his order earlier in the thread (on this very page).
Thanks! Sent him an email.Is there an Alps TKL PCB that fits the Mira and if so, could you provide with a link?
email leeku11@gmail.com to buy one.
WARNING
he is lazy as all hell, and will take 3 months to mail it. You have to make sure he knows that you want it faster than that BS
Thanks! Sent him an email.Is there an Alps TKL PCB that fits the Mira and if so, could you provide with a link?
email leeku11@gmail.com to buy one.
WARNING
he is lazy as all hell, and will take 3 months to mail it. You have to make sure he knows that you want it faster than that BS
Edit: Leeku answered, super fast. He still has Alps PCBs that fit the MIRA. Just without the plate unfortunately. Send me a PM if you have the files for it or are interested in a plate and maybe we can get something going.
For Leeku's Alps PCB? That's awesome. Does his PCB also support Winkeyless?Thanks! Sent him an email.Is there an Alps TKL PCB that fits the Mira and if so, could you provide with a link?
email leeku11@gmail.com to buy one.
WARNING
he is lazy as all hell, and will take 3 months to mail it. You have to make sure he knows that you want it faster than that BS
Edit: Leeku answered, super fast. He still has Alps PCBs that fit the MIRA. Just without the plate unfortunately. Send me a PM if you have the files for it or are interested in a plate and maybe we can get something going.
I have the plate files and will have a GB for them soon.
Update is in the OP. The design has been clarified with EVE and production should have begun. There were tweaks but no major redesign. There are designs for alps plates for the Mira and once production has gotten into full swing and I can provide pictures I will begin an interest check for alps plates and PCB's, partial plates, polycarbonate plates, and brass plates. At this point in time I will not release CAD files for plates and plan on looking at pricing for the above items once I know the timeline for the Mira SE.
MoreThanks! Sent him an email.Is there an Alps TKL PCB that fits the Mira and if so, could you provide with a link?
email leeku11@gmail.com to buy one.
WARNING
he is lazy as all hell, and will take 3 months to mail it. You have to make sure he knows that you want it faster than that BS
Edit: Leeku answered, super fast. He still has Alps PCBs that fit the MIRA. Just without the plate unfortunately. Send me a PM if you have the files for it or are interested in a plate and maybe we can get something going.
I have the plate files and will have a GB for them soon.
For Leeku's Alps PCB? That's awesome. Does his PCB also support Winkeyless?
I'm embarrassingly excited about this now that I'm in it.Damn right you should be embarrassed about being excited for a keyboard, especially on geekhack of all places.
I'm embarrassingly excited about this now that I'm in it.Damn right you should be embarrassed about being excited for a keyboard, especially on geekhack of all places.
Just posting to say that we're all aware of the requests for the timeline, and it will be posted once the manufacturer provides it.
What is the spacebar length on standard window-keyed layout? I am looking at the massdrop SA spacebar?6.25u
need to update my shipping address, who should I PM?
Just posting to say that we're all aware of the requests for the timeline, and it will be posted once the manufacturer provides it.
I've been asking for weeks now for a revised timeline and have been told it's coming but am still waiting. Starting to get a bit frustrated as well. I know there's a bit of delay due to unforseen circumstances, which is fine, however I would like to know what this means in terms of delivery date.So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
this is starting to get a little frustrating. why are we not getting more updates as things happen? everyone has paid. this is not the time to make changes to the design, just get the order in and update us on production.
Sent from my Nexus 6P using Tapatalk
I've been asking for weeks now for a revised timeline and have been told it's coming but am still waiting. Starting to get a bit frustrated as well. I know there's a bit of delay due to unforseen circumstances, which is fine, however I would like to know what this means in terms of delivery date.So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
this is starting to get a little frustrating. why are we not getting more updates as things happen? everyone has paid. this is not the time to make changes to the design, just get the order in and update us on production.
Sent from my Nexus 6P using Tapatalk
If I had a revised timeline I would give it to you.
I know he is working on the boards but I haven't been able to get a date on shipping. I will post something in the OP shortly.
I've been asking for weeks now for a revised timeline and have been told it's coming but am still waiting. Starting to get a bit frustrated as well. I know there's a bit of delay due to unforseen circumstances, which is fine, however I would like to know what this means in terms of delivery date.So... Are we in production yet? Sorry, that wasn't clear to me
I've heard through the grape vine that production started last week
this is starting to get a little frustrating. why are we not getting more updates as things happen? everyone has paid. this is not the time to make changes to the design, just get the order in and update us on production.
Sent from my Nexus 6P using Tapatalk
If I had a revised timeline I would give it to you.
I know he is working on the boards but I haven't been able to get a date on shipping. I will post something in the OP shortly.
Handled moistgun's O mira yesterday at keycon
hype is renewed
MIRA SE ano finish is different than OMIRA finish right?
Handled moistgun's O mira yesterday at keycon
hype is renewed
MIRA SE ano finish is different than OMIRA finish right?
Probably depends on which prototype it was / which factory made it. Which case was this one? The cases I've handled for a day when I was taking photos had a very silky / satiny texture; those were made by EVE. Different from the harder rougher texture of my LZ-GH.
Handled moistgun's O mira yesterday at keycon
hype is renewed
MIRA SE ano finish is different than OMIRA finish right?
Probably depends on which prototype it was / which factory made it. Which case was this one? The cases I've handled for a day when I was taking photos had a very silky / satiny texture; those were made by EVE. Different from the harder rougher texture of my LZ-GH.
given the recent events in other group buys, i sincerely hope that the manufacturer has clear instructions as to the quality we are expecting. i would rather not have to deal with QA/QC issues after they have delivered the product
Hi all, I've just learned that the current estimated end of production and beginning of packing and shipping will be in early August.
The group buy you're thinking of knowingly chose a bad manu.
1. It's easy to tell who is ****posting and who actually cares - you should've done your research. My cases finished production on the 16th of November. It was the weights (the design mainly) that took us further. 27's cases arrived on the 16th of January. Therefore my cases were done 2 months before his arrived. This means there was absolutely no way to judge quality.
Hi all, I've just learned that the current estimated end of production and beginning of packing and shipping will be in early August.Thanks for the update!
given the recent events in other group buys, i sincerely hope that the manufacturer has clear instructions as to the quality we are expecting. i would rather not have to deal with QA/QC issues after they have delivered the product.I sincerely hope we won't have to deal with QC issues.
If I get an extra plate for my Dolphin I plan on selling off my spot. Lunar Grey Winkeyless.
#19 engraved.
Will post how much I paid (or just check the spreadsheet) as well as the $40 for the Limited Edition spot.
I think I've read that other users are planning on using Alps and thus also need a plate. Is there anyone who's already working on a one? I don't know how to do this myself and would appreciate it if there were someone else doing it.
Cheers! Looking forward to that.I think I've read that other users are planning on using Alps and thus also need a plate. Is there anyone who's already working on a one? I don't know how to do this myself and would appreciate it if there were someone else doing it.
https://geekhack.org/index.php?topic=87310.msg2437199#msg2437199
and the next post.
Got any more of those production photos?
I'd like to sell my spot. I ordered a winkey layout, black case, steel plate, and brass weight.
I'd like to sell my spot. I ordered a winkey layout, black case, steel plate, and brass weight.
Got any more of those production photos?
yes
http://imgur.com/a/qjiV2
also posted in update post
Got any more of those production photos?
yes
http://imgur.com/a/qjiV2
also posted in update post
oooh! very nice thanks for the pics ninja, please keep them coming! tbh, its a little surreal to see them finally being manufactured
Got any more of those production photos?
yes
http://imgur.com/a/qjiV2
also posted in update post
Have shipping bills been sent out yet, I don't want to miss mine, I am seldom on geekhack? I assume they will come via my email through paypal.
Have shipping bills been sent out yet, I don't want to miss mine, I am seldom on geekhack? I assume they will come via my email through paypal.
No they haven't gone out
Anyone else get a notification from PayPal with delivery information? The details were blank but it looks like it has been marked as shipped in PayPal.
Anyone else get a notification from PayPal with delivery information? The details were blank but it looks like it has been marked as shipped in PayPal.
Update which is really no update - CNC almost completed. Preparing/beginning anodyzing. No pictures yetWeW
Update which is really no update - CNC almost completed. Preparing/beginning anodyzing. No pictures yet
Anyone that received an email from paypal that their item was shipped - untrue obviously. It happened because of a work around to prevent paypal from locking the paypal account.Why does that even happen? And do you know when this may or may not happen?
Anyone that received an email from paypal that their item was shipped - untrue obviously. It happened because of a work around to prevent paypal from locking the paypal account.Why does that even happen? And do you know when this may or may not happen?
Looking forward to my MIRA!
Anyone that received an email from paypal that their item was shipped - untrue obviously. It happened because of a work around to prevent paypal from locking the paypal account.Why does that even happen? And do you know when this may or may not happen?
Looking forward to my MIRA!
Paypal requires you to send a product, they dont technically allow group buys. So the GB runner lies and says its shipped so Paypal doesnt freeze the account.
Anyone that received an email from paypal that their item was shipped - untrue obviously. It happened because of a work around to prevent paypal from locking the paypal account.Why does that even happen? And do you know when this may or may not happen?
Looking forward to my MIRA!
Paypal requires you to send a product, they dont technically allow group buys. So the GB runner lies and says its shipped so Paypal doesnt freeze the account.
That's interesting. If one of these group buys goes south, does this process affect the buyer's ability to get money back from PayPal? I always assumed that people preferred PayPal because it offers some level of protection. Has anyone gone through the process of attempting a reimbursement if the item's already been marked as shipped and PayPal's already released the funds?
Actually this is something that should have only affected the recent few slot transfers. What happened was ninja used the 'shipped' option to clear the funds from being held by paypal instead of 'processed' -- an accidental mistake on his part. As soon as I saw the posts here about shipping notifications, I realized that must have been the root cause. The original payments months ago were set to 'processed' correctly, which is PayPal's preferred method of marking preorders without a clear shipping date (he had talked to PayPal a number of times about how to approach this group buy before he started taking payments). Anyone whose order has been marked as "shipped" (hence the e-mails) and if if bothers you, please send a PM to ninja to sort it out.
Actually this is something that should have only affected the recent few slot transfers. What happened was ninja used the 'shipped' option to clear the funds from being held by paypal instead of 'processed' -- an accidental mistake on his part. As soon as I saw the posts here about shipping notifications, I realized that must have been the root cause. The original payments months ago were set to 'processed' correctly, which is PayPal's preferred method of marking preorders without a clear shipping date (he had talked to PayPal a number of times about how to approach this group buy before he started taking payments). Anyone whose order has been marked as "shipped" (hence the e-mails) and if if bothers you, please send a PM to ninja to sort it out.
Anyone that received an email from paypal that their item was shipped - untrue obviously. It happened because of a work around to prevent paypal from locking the paypal account.Why does that even happen? And do you know when this may or may not happen?
Looking forward to my MIRA!
Paypal requires you to send a product, they dont technically allow group buys. So the GB runner lies and says its shipped so Paypal doesnt freeze the account.
Anyone that received an email from paypal that their item was shipped - untrue obviously. It happened because of a work around to prevent paypal from locking the paypal account.Why does that even happen? And do you know when this may or may not happen?
Looking forward to my MIRA!
Paypal requires you to send a product, they dont technically allow group buys. So the GB runner lies and says its shipped so Paypal doesnt freeze the account.
That's interesting. If one of these group buys goes south, does this process affect the buyer's ability to get money back from PayPal? I always assumed that people preferred PayPal because it offers some level of protection. Has anyone gone through the process of attempting a reimbursement if the item's already been marked as shipped and PayPal's already released the funds?
Anyone that received an email from paypal that their item was shipped - untrue obviously. It happened because of a work around to prevent paypal from locking the paypal account.Why does that even happen? And do you know when this may or may not happen?
Looking forward to my MIRA!
Paypal requires you to send a product, they dont technically allow group buys. So the GB runner lies and says its shipped so Paypal doesnt freeze the account.
Actually the product must be processed or shipped. I spent a lot of time on the phone with them so I would know their rules and so that had documentation of what I was doing.
Anyone that received an email from paypal that their item was shipped - untrue obviously. It happened because of a work around to prevent paypal from locking the paypal account.Why does that even happen? And do you know when this may or may not happen?
Looking forward to my MIRA!
Paypal requires you to send a product, they dont technically allow group buys. So the GB runner lies and says its shipped so Paypal doesnt freeze the account.
That's interesting. If one of these group buys goes south, does this process affect the buyer's ability to get money back from PayPal? I always assumed that people preferred PayPal because it offers some level of protection. Has anyone gone through the process of attempting a reimbursement if the item's already been marked as shipped and PayPal's already released the funds?
Doing that only accomplishes one thing for you in a group buy - it locks the organizers account. The organizer can't access the funds and PayPal won't refund them to the buyer. That can result in both you and other participants in whatever GB that is done in not receiving their money or their product. I know this has happened in the past in other GB's resulting in a bad outcome for the organizer of the GB and the participants. That is why PayPal states a dispute should be done only as a last resort.
Hey everyone, I hang around reddit quite a bit and finally made my way over here due to this beauty. Truly an awesome board. Is there anyone who is in on the buy that is thinking about giving up their spot? I'm kicking myself for missing this and would love some way to get in on it!
What are the chances of me being able to purchase a PCB this late into the group buy???
You can always message Leeku and purchase a TX87 pcb. Furthermore, the MIRA SE is compatible with multiple PCBs, more information is on the first post.
Ninjadoc actually got extra PCBs (overcounted a bit), so he can add an extra to an order. PM him if you want extra TX87 PCB(s).
If anyone is interesting in taking my spot, shoot me PM. I'm 23 on the sheet. I got wkl pink, pink plate, brass weight.
Man, it only number on list ;)If anyone is interesting in taking my spot, shoot me PM. I'm 23 on the sheet. I got wkl pink, pink plate, brass weight.
Dammit I want that numbered weight.
We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
wait a second, your going to put gateron blues in a Mira? :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
RIP resale value
I have a second plate if I decide to sell, so that's not really a concern.
Might put mod-m's in still instead, still undecided.
What kind of switch should I be putting in?
We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
wait a second, your going to put gateron blues in a Mira? :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
RIP resale value
I have a second plate if I decide to sell, so that's not really a concern.
Might put mod-m's in still instead, still undecided.
What kind of switch should I be putting in?
We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
wait a second, your going to put gateron blues in a Mira? :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
RIP resale value
I have a second plate if I decide to sell, so that's not really a concern.
Might put mod-m's in still instead, still undecided.
What kind of switch should I be putting in?
Not sure about how much experience you have with expensive customs like this but generally any clicky switch is looked down upon (sence they are inconsistent and generally hated by everyone, especially with some weird ass mod). Not sure if you have been exposed to the Gateron clone switch circle jerk where everyone assumes they are "better" even though they are super inconstant and the stems in them wobble a LOT side to side, not to mention a 1:1 cherry ripoff/copy/counterfeit switch..... Gateron is snake oil.
This is going to sound super elitist but IMO there are only a couple criteria of switch anatomy that I would even think about putting in this board:
Stems: Cherry Clear, Cherry Vintage Black, Cherry Speed, Cherry Silent, Mod M
Housings: Cherry or MOD
Springs: (as much as i hate sprit) Sprit gold plated springs
Lube: Techkeys krytox (viscosity depending on stem type)
But I mean its your board so do whatever you want its just like sacrilege seeing someone disrespect a board like this with clickys. :))
Not sure about how much experience you have with expensive customs like this but generally any clicky switch is looked down upon (sence they are inconsistent and generally hated by everyone, especially with some weird ass mod). Not sure if you have been exposed to the Gateron clone switch circle jerk where everyone assumes they are "better" even though they are super inconstant and the stems in them wobble a LOT side to side, not to mention a 1:1 cherry ripoff/copy/counterfeit switch..... Gateron is snake oil.
This is going to sound super elitist but IMO there are only a couple criteria of switch anatomy that I would even think about putting in this board:
Stems: Cherry Clear, Cherry Vintage Black, Cherry Speed, Cherry Silent, Mod M
Housings: Cherry or MOD
Springs: (as much as i hate sprit) Sprit gold plated springs
Lube: Techkeys krytox (viscosity depending on stem type)
But I mean its your board so do whatever you want its just like sacrilege seeing someone disrespect a board like this with clickys. :))
I see your point. They are Jailhouse blues though, so they're technically not really clicky any more at all.
Ignorant question, but what's the benefit of swapping out the springs in my Mod-Ms to spirit gold plated? Was already going to take them apart to lube them.
Ignorant question, but what's the benefit of swapping out the springs in my Mod-Ms to spirit gold plated? Was already going to take them apart to lube them.
I wouldn't even put MOD switches on that list. They're not gaterons, but they're not better than MX linears. Vintage Browns are much better, though hard to find.
No need to swap springs on MOD switches, if you do go that way.
Kin sells springs at similar weights to sprit springs, message him on telegram. I think it's like $3 per 100 with $1 shipping. They're not gold, but that doesn't matter.
We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
wait a second, your going to put gateron blues in a Mira? :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
RIP resale value
I have a second plate if I decide to sell, so that's not really a concern.
Might put mod-m's in still instead, still undecided.
What kind of switch should I be putting in?
Pretty much, We all have our preferences for switches we like but it be so silly to change them based on the value you think you would get out of that.We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
wait a second, your going to put gateron blues in a Mira? :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
RIP resale value
I have a second plate if I decide to sell, so that's not really a concern.
Might put mod-m's in still instead, still undecided.
What kind of switch should I be putting in?
You should put in whatever kind of switch you like best. It's your board and you should build it the way that will provide the most enjoyment for you.
Not everyone buys things just to resell them. Alas, there are far better things to invest money in than keyboards if one is just looking to make profit.
Pretty much, We all have our preferences for switches we like but it be so silly to change them based on the value you think you would get out of that.We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
wait a second, your going to put gateron blues in a Mira? :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
RIP resale value
I have a second plate if I decide to sell, so that's not really a concern.
Might put mod-m's in still instead, still undecided.
What kind of switch should I be putting in?
You should put in whatever kind of switch you like best. It's your board and you should build it the way that will provide the most enjoyment for you.
Not everyone buys things just to resell them. Alas, there are far better things to invest money in than keyboards if one is just looking to make profit.
Waiting/hoping/requested pictures - then will update.
We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
Pretty much, We all have our preferences for switches we like but it be so silly to change them based on the value you think you would get out of that.We all on schedule?
I put my Aristotel stems in my Zeal switch housing today, cant wait to get ahold of the board
I have about half of my Gateron Blues j-switched. Can't wait to get this board either. This is my first custom so it's especially awesome.
wait a second, your going to put gateron blues in a Mira? :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
RIP resale value
I have a second plate if I decide to sell, so that's not really a concern.
Might put mod-m's in still instead, still undecided.
What kind of switch should I be putting in?
You should put in whatever kind of switch you like best. It's your board and you should build it the way that will provide the most enjoyment for you.
Not everyone buys things just to resell them. Alas, there are far better things to invest money in than keyboards if one is just looking to make profit.
For me, it's more about purism/elitism. I avoid non-cherry switches on purpose, whether they're good or not.
But again, I'm not the boss of you. Put whatever you want into your mira.
PCB's - I will have extra's
Link to album of pictures is in the second post
(http://i.imgur.com/xWzB6nll.jpg) (http://i.imgur.com/xWzB6nll.jpg)
Would love to see the brass weights! :DDD
Would love to see the brass weights! :DDD
Would love to see the brass weights! :DDD
There's a link on first page under main post for pics album.
http://imgur.com/a/FvLfg
Would love to see the brass weights! :DDDShow Image(http://i.imgur.com/pRrabXc.jpg)
Would love to see the brass weights! :DDD
There's a link on first page under main post for pics album.
http://imgur.com/a/FvLfg
Would love to see the brass weights! :DDD
There's a link on first page under main post for pics album.
http://imgur.com/a/FvLfg
omg omg omg :eek:
The Mira will look so sick with my battlestation. http://i.imgur.com/YlZGIbf.jpg (http://i.imgur.com/YlZGIbf.jpg)
Would love to see the brass weights! :DDD
There's a link on first page under main post for pics album.
http://imgur.com/a/FvLfg
omg omg omg :eek:
The Mira will look so sick with my battlestation. http://i.imgur.com/YlZGIbf.jpg (http://i.imgur.com/YlZGIbf.jpg)
needs more rgb
Would love to see the brass weights! :DDD
There's a link on first page under main post for pics album.
http://imgur.com/a/FvLfg
omg omg omg :eek:
The Mira will look so sick with my battlestation. http://i.imgur.com/YlZGIbf.jpg (http://i.imgur.com/YlZGIbf.jpg)
needs more rgb
You can never really have TOO much RGB :)) :p
In a way, white lights are the most RGB you can get ^-^
hey ninja, i really appreciate the consistent updates. pictures are also great, thanks to you and eve for providing them.
is it too early to ask about shipping, or getting a schedule written down so that i can manage my expectations?
thanks
hey ninja, i really appreciate the consistent updates. pictures are also great, thanks to you and eve for providing them.
is it too early to ask about shipping, or getting a schedule written down so that i can manage my expectations?
thanks
yeh i think i need to do a change of address if this doesn't ship in the next week or two so this would be nice
I don't have any updates on shipping yet.
Hopefully anodizing is in process, I've request more photos.
I'm talking with zzyjayfree about offering the same assembly services he is offering for "The Moon".
Hopefully more to follow.
I don't have any updates on shipping yet.
Hopefully anodizing is in process, I've request more photos.
I'm talking with zzyjayfree about offering the same assembly services he is offering for "The Moon".
Hopefully more to follow.
I don't have any updates on shipping yet.
Hopefully anodizing is in process, I've request more photos.
I'm talking with zzyjayfree about offering the same assembly services he is offering for "The Moon".
Hopefully more to follow.
Looking forward to those pics! Assembly service sounds nice too. That being said, I think I want to do this on my own once I get my soldering skills up to par.
I don't have any updates on shipping yet.
Hopefully anodizing is in process, I've request more photos.
I'm talking with zzyjayfree about offering the same assembly services he is offering for "The Moon".
Hopefully more to follow.
Looking forward to those pics! Assembly service sounds nice too. That being said, I think I want to do this on my own once I get my soldering skills up to par.
I bought a Hakko FX-888D in March and I still have no experience :-[
I don't have any updates on shipping yet.
Hopefully anodizing is in process, I've request more photos.
I'm talking with zzyjayfree about offering the same assembly services he is offering for "The Moon".
Hopefully more to follow.
Looking forward to those pics! Assembly service sounds nice too. That being said, I think I want to do this on my own once I get my soldering skills up to par.
I bought a Hakko FX-888D in March and I still have no experience :-[
I bought a Hakko FX-888D in March and I still have no experience :-[
There's a lot of different practice kits that can buy pretty cheaply. That should help you get your soldering skills up.
I bought a Hakko FX-888D in March and I still have no experience :-[
buy a practice board and stick some switches to it
Just posted an update.
What are bsun housings?
Several have asked for plates/spacers to take place of the diffusers. I've asked Eve if that is a possibility.
Several have asked for plates/spacers to take place of the diffusers. I've asked Eve if that is a possibility.
that would be awesome if i could get a stainless steel spacer to match my weight :eek: was hoping to at least procure CAD files to make my own after the gb was done
Hello guys, unfortunately I am not browsing this thread as much as I would like to. Kindly, is there any estimated ship date and has shipping been invoiced/ paid for yet? Ninja doc/ photoelectric how will we know when to pay shipping? If you have my personal email, that is the best place I can be contacted, however if I know an estimated invoice date for shipping I will be on the look out for a PM. Thank you.
Hello guys, unfortunately I am not browsing this thread as much as I would like to. Kindly, is there any estimated ship date and has shipping been invoiced/ paid for yet? Ninja doc/ photoelectric how will we know when to pay shipping? If you have my personal email, that is the best place I can be contacted, however if I know an estimated invoice date for shipping I will be on the look out for a PM. Thank you.
Unfortunately still waiting to hear any updates regarding shipping/completion status. zzjayfree is supposed to be doing inviocing for shipping. As far as announcements for that, I think you will simply get a PayPal invoice notification by e-mail to the e-mail address you indicated when you submitted your order.
P.S.: hoping for updates sometime next week. Person in charge of this project at the factory is away in different part of China until next week, and last we know is that the parts were being sandblasted for anodizing. Hopefully it means at this time they are already in the anodizing process. Will update as soon as we learn something new.
Several have asked for plates/spacers to take place of the diffusers. I've asked Eve if that is a possibility.
that would be awesome if i could get a stainless steel spacer to match my weight :eek: was hoping to at least procure CAD files to make my own after the gb was done
Agreed I would be interested too.
Thanks for updates all throughout this buy.P.S.: hoping for updates sometime next week. Person in charge of this project at the factory is away in different part of China until next week, and last we know is that the parts were being sandblasted for anodizing. Hopefully it means at this time they are already in the anodizing process. Will update as soon as we learn something new.
Well, Photoelectric beat me to it - still waiting - it's being completed, just taking longer than planned. It is hard to coordinate the production of a keyboard - especially when everything is done so far away.
(http://i.imgur.com/57X3q6Rl.jpg) (http://i.imgur.com/57X3q6Rl.jpg)
http://imgur.com/a/kPq0h
Need I say more?
I will be more excited when they are anodized.
I may do a write up about the pleasure of GB's after this is completed.
I will be more excited when they are anodized.
I may do a write up about the pleasure of GB's after this is completed.
(http://i.imgur.com/57X3q6Rl.jpg) (http://i.imgur.com/57X3q6Rl.jpg)Can't wait!!!
http://imgur.com/a/kPq0h
Need I say more?
Looking to transfer my spot. limited edition #46, silver/silver with blue plate and brass weight. It'll be exactly what I paid which is $449.17 ($409.17 for the board, $40 for the limited edition #46 weight and the gold stabs that come with it).
PM me if interested.
Lishi asked me about estimated shipping date toady. I'm not sure. Due to my attempt of getting the Mira to allow the useage of the winkeyless PCB and just the general difficulties of running a GB it has taken longer than expected. My apologies to all of you and thank you for your patience. Anodizing, anothe QA check, arrival of the rest of the PCB's from Leeku, and shipping are left. I'm going to say by the end of September but that is only my guess without feedback from EVE. Image checking 125 keyboards for flaws and packing them - sounds tedious to me and very easy to miss small imperfections - especially after checking a few boards.
arrival of the rest of the PCB's from Leeku...are left
GOOD LUCK ON THAT ONE
He is supposedly checking each PCB individually before sending it, so that could explain why it takes so long... At least that's what he said about our batch.
Have lunar Grey wkl would want to swap for another color wkl.
My spot is Black WK and black is great but I'd be interested in a different color. If anyone wants to trade their spot for mine, let me know. I wouldn't mind Blue, Grey, or Silver, and either WKL or WK is totally fine with me.
Possibly looking for a color swap. I have WKL Blue top/Silver bottom and would be interested in a trade for Black, Grey, or even just for a Blue bottom. WK or WKL, both are fine.
Looking to swap my WK gray top for a WKL gray top.
I apologize about the delay. I've been occupied by wedding stuff but I have no updates. I know EVE had to travel for business and I know that the boards are/were getting surface finishing and being checked for defects. Other than that - I don't know anything new. To keep you from getting bored here is something to think about
(https://i.imgur.com/3wMWAlyl.png) (https://i.imgur.com/3wMWAlyl.png)
I apologize about the delay. I've been occupied by wedding stuff but I have no updates. I know EVE had to travel for business and I know that the boards are/were getting surface finishing and being checked for defects. Other than that - I don't know anything new. To keep you from getting bored here is something to think about
(https://i.imgur.com/3wMWAlyl.png) (https://i.imgur.com/3wMWAlyl.png)
I apologize about the delay. I've been occupied by wedding stuff but I have no updates. I know EVE had to travel for business and I know that the boards are/were getting surface finishing and being checked for defects. Other than that - I don't know anything new. To keep you from getting bored here is something to think about
(https://i.imgur.com/3wMWAlyl.png) (https://i.imgur.com/3wMWAlyl.png)
I apologize about the delay. I've been occupied by wedding stuff but I have no updates. I know EVE had to travel for business and I know that the boards are/were getting surface finishing and being checked for defects. Other than that - I don't know anything new. To keep you from getting bored here is something to think about
(https://i.imgur.com/3wMWAlyl.png) (https://i.imgur.com/3wMWAlyl.png)
I apologize about the delay. I've been occupied by wedding stuff but I have no updates. I know EVE had to travel for business and I know that the boards are/were getting surface finishing and being checked for defects. Other than that - I don't know anything new. To keep you from getting bored here is something to think about
(https://i.imgur.com/3wMWAlyl.png) (https://i.imgur.com/3wMWAlyl.png)
I think ninja meant the pad as a future plan, not immediate plan for this group buy.
As far as I know, the engravings on limited edition weights are a bonus to those who supported the original IC for this specific group buy. A donation of sorts, to keep the promise to the original supporters, though the promise was made by someone else. Each one is different and requires a separate CAD file.
Hmm, doesn't a render imply CAD files exist?I think they are talking about the limited numbering on the Mira, where photoelectric mentioned it requires a separate cad files for each number.
Hmm, doesn't a render imply CAD files exist?I think they are talking about the limited numbering on the Mira, where photoelectric mentioned it requires a separate cad files for each number.
I could be wrong though.
Sent from my HTC 10 using Tapatalk
How about matching our limited edition number as well?
Sent from my HTC 10 using Tapatalk
I apologize about the delay. I've been occupied by wedding stuff but I have no updates. I know EVE had to travel for business and I know that the boards are/were getting surface finishing and being checked for defects. Other than that - I don't know anything new. To keep you from getting bored here is something to think about
(https://i.imgur.com/3wMWAlyl.png) (https://i.imgur.com/3wMWAlyl.png)
First I would like to thank zzyjayfree for obtaining the pictures for us
Anodizing is ongoing
And before you ask - the red is one of my prototypes
(https://i.imgur.com/4KDMdf2l.jpg) (https://i.imgur.com/4KDMdf2l.jpg)
https://imgur.com/a/tcFd9 (https://imgur.com/a/tcFd9)
I apologize about the delay. I've been occupied by wedding stuff but I have no updates. I know EVE had to travel for business and I know that the boards are/were getting surface finishing and being checked for defects. Other than that - I don't know anything new. To keep you from getting bored here is something to think about
(https://i.imgur.com/3wMWAlyl.png) (https://i.imgur.com/3wMWAlyl.png)
With the anodizing finally moving along, is there gonna be a plate gb soon, or only after the current gb is done?
Ninja, any update on the PCBs from Leeku? Getting a bit concerned that the anodizing will be done before all PCBs are received.
Boards look amazing BTW. Great job keeping up with the GB, can't wait to get this under my fingers.
And all PCB's have been shipped to EVE.
Progress - I'm starting to see a glimmer of light at the end of the tunnel
Ninja, any update on the PCBs from Leeku? Getting a bit concerned that the anodizing will be done before all PCBs are received.
Boards look amazing BTW. Great job keeping up with the GB, can't wait to get this under my fingers.
Looking to let go of my spot #54. Blue/Blue/Black Steel Plate/WK. PM me with any questions, looking to get what i paid for it!
Looking to let go of my spot #54. Blue/Blue/Black Steel Plate/WK. PM me with any questions, looking to get what i paid for it!
Swaps are done with ninja refunding you and invoicing the person you're swapping with. Remember to PM ninja about it.
What are these? they look like fancy artisan holders. https://imgur.com/SoX4A03 (https://imgur.com/SoX4A03)
What are these? they look like fancy artisan holders. https://imgur.com/SoX4A03 (https://imgur.com/SoX4A03)
Those are boxes for artisans :p
I'd be curious to know if I can get one or a couple of these artisan boxes...What are these? they look like fancy artisan holders. https://imgur.com/SoX4A03 (https://imgur.com/SoX4A03)
Those are boxes for artisans
I'd be curious to know if I can get one or a couple of these artisan boxes...What are these? they look like fancy artisan holders. https://imgur.com/SoX4A03 (https://imgur.com/SoX4A03)
Those are boxes for artisans
Sent from my SM-G935T using Tapatalk
I'd be curious to know if I can get one or a couple of these artisan boxes...What are these? they look like fancy artisan holders. https://imgur.com/SoX4A03 (https://imgur.com/SoX4A03)
Those are boxes for artisans
Sent from my SM-G935T using Tapatalk
pretty sure it was a china only GB
so good luck with that
Show Image(https://i.imgur.com/h0buHE7.jpg)
Is the color of the first case on the right Night Sky Blue?
Show Image(https://i.imgur.com/h0buHE7.jpg)
Is the color of the first case on the right Night Sky Blue?
That is the gray. The night sky blue is a much lighter shade of blue
Show Image(https://i.imgur.com/h0buHE7.jpg)
Is the color of the first case on the right Night Sky Blue?
That is the gray. The night sky blue is a much lighter shade of blue
That could be it as well. I was just thinking it might be just that the color balance is off
Looks pretty blue to be the Grey.
Considering the Chinese MIRA GB offered that color, it could be another of Ninja's protos. It could also just be one of the Chinese ones for reference.
Show Image(https://i.imgur.com/h0buHE7.jpg)
Is the color of the first case on the right Night Sky Blue?
That is the gray. The night sky blue is a much lighter shade of blue
That could be it as well. I was just thinking it might be just that the color balance is off
Looks pretty blue to be the Grey.
Considering the Chinese MIRA GB offered that color, it could be another of Ninja's protos. It could also just be one of the Chinese ones for reference.
Show Image(https://i.imgur.com/h0buHE7.jpg)
Is the color of the first case on the right Night Sky Blue?
We are waiting on EVE to finish anodizing the boards and packing them. You will know soon after I do on delivery expectations.
We are waiting on EVE to finish anodizing the boards and packing them. You will know soon after I do on delivery expectations.Are you goint to check for quality issues before shipping or is that EVE's job?
We are waiting on EVE to finish anodizing the boards and packing them. You will know soon after I do on delivery expectations.Are you goint to check for quality issues before shipping or is that EVE's job?
mira numpad whenI have the CAD files in hand. I have to review them, make a decision on two elements, and then I'll do the interest check.
Good to see lots of care when handling this GB, I would hate this board to have a sour taste in my mouthWe are waiting on EVE to finish anodizing the boards and packing them. You will know soon after I do on delivery expectations.Are you goint to check for quality issues before shipping or is that EVE's job?
EVE checks before anodizing and after anodizing. I've seen him reanodize several in the Chinese GB because he wasn't happy with the result.
Good to hear that. Can't wait to have the board in my hand.We are waiting on EVE to finish anodizing the boards and packing them. You will know soon after I do on delivery expectations.Are you goint to check for quality issues before shipping or is that EVE's job?
EVE checks before anodizing and after anodizing. I've seen him reanodize several in the Chinese GB because he wasn't happy with the result.
I love the idea of having a matching numpad. Count me in.mira numpad whenI have the CAD files in hand. I have to review them, make a decision on two elements, and then I'll do the interest check.
Sent from my iPhone using Tapatalk
only thing that would keep me from mirapad is money
if i can get one that matches my LE number i'm probably in tho
Looking to transfer my spot. The options I selected are:
- Winkey layout
- Black Top / Black Bottom Case w/ Silver Plate
- Steel Weight
I've already contacted ninjadoc and Photoelectric, but I'm posting as Photoelectric is out of the country and doesn't currently have computer access (until Oct. 3).
If interested, please PM ninjadoc or Photoelectric as well, thanks!
it's a amazing keyboard, when we have the second group buy? or someone sell it to me? if do please sent me email [redacted]
it's a amazing keyboard, when we have the second group buy? or someone sell it to me? if do please sent me email [redacted]
there won't be a second GB
it's a amazing keyboard, when we have the second group buy? or someone sell it to me? if do please sent me email [redacted]
there won't be a second GB
Has this been confirmed? Like, ever? If so, I wish I gad gotten 2 lol
Are we going to get another update anytime soon?
I would be interested in an R2 :) Sort of waited this one out to see what was happening with the Alps option.
Looking to transfer my spot. The options I selected are:
- Winkey layout
- Black Top / Black Bottom Case w/ Silver Plate
- Steel Weight
I've already contacted ninjadoc and Photoelectric, but I'm posting as Photoelectric is out of the country and doesn't currently have computer access (until Oct. 3).
If interested, please PM ninjadoc or Photoelectric as well, thanks!
Sent you a PM
Are we going to get another update anytime soon?
I would be interested in an R2 :) Sort of waited this one out to see what was happening with the Alps option.What do you mean? The Leeku A87 PCB for Alps switches is supposed to be compatibe with this one and the only thing missing is a proper plate for it. Ninja said that he'll eventually offer plate for Alps after (?) shipping started.
I would be interested in an R2 :) Sort of waited this one out to see what was happening with the Alps option.What do you mean? The Leeku A87 PCB for Alps switches is supposed to be compatibe with this one and the only thing missing is a proper plate for it. Ninja said that he'll eventually offer plate for Alps after (?) shipping started.
That's certainly true. Apart from the fact that if he used the search engine, he'd have probably found ninjadoc's statement, it's not obvious. That's true.I would be interested in an R2 :) Sort of waited this one out to see what was happening with the Alps option.What do you mean? The Leeku A87 PCB for Alps switches is supposed to be compatibe with this one and the only thing missing is a proper plate for it. Ninja said that he'll eventually offer plate for Alps after (?) shipping started.
that's not immediately obvious if you don't read the thread
I will offer an alps plate.
Leeku's alps board fits.
winkeyless's A87/B87 PCB does not fit
The NERD does fit
Round 2---I don't know.
I have a keypad designed, a mini in planning, possibly a 65%.
1800 or full size - don't know.
Currently I/we have found a US machine shop that would produce the keyboard at a reasonable price. Anodizing has also been looked at.
a US PCB utilizing TMK has been discussed - unfortunately designing that is beyond my capabilities.
The original OTD boards were designed for particular switches - linear or tactile. This has been discussed on KBDlab and their appears to be a debate on exactly what the design difference is. Obviously it is multi-factorial and I have some ideas on design differences.
As Puddsy mentioned there is a holiday in china. I've been asking for a while and have received no updates on Mira production.
Hopefully that answers most questions.
I will offer an alps plate.Id totally go for a 60% or 65%, the TGR-910 really open my eyes to the possibility of how good 65%s can be.
Leeku's alps board fits.
winkeyless's A87/B87 PCB does not fit
The NERD does fit
Round 2---I don't know.
I have a keypad designed, a mini in planning, possibly a 65%.
1800 or full size - don't know.
Currently I/we have found a US machine shop that would produce the keyboard at a reasonable price. Anodizing has also been looked at.
a US PCB utilizing TMK has been discussed - unfortunately designing that is beyond my capabilities.
The original OTD boards were designed for particular switches - linear or tactile. This has been discussed on KBDlab and their appears to be a debate on exactly what the design difference is. Obviously it is multi-factorial and I have some ideas on design differences.
As Puddsy mentioned there is a holiday in china. I've been asking for a while and have received no updates on Mira production.
Hopefully that answers most questions.
Thanks for the update ninja. I'd love a mirapad.
Thanks for the update ninja. I'd love a mirapad.
Same here! 2
definitely getting a mira pad, maybe 2 if i need to help moq
Wonder what will come first Mira or GMK Yuri.
the keyboard and keyset go hand in hand so well
Wonder what will come first Mira or GMK Yuri.
the keyboard and keyset go hand in hand so well
i hope to **** it's this
i remember ogling the original IC years ago
so glad we're so close
Wonder what will come first Mira or GMK Yuri.
the keyboard and keyset go hand in hand so well
i hope to **** it's this
i remember ogling the original IC years ago
so glad we're so close
i have my board from the china version of the gb and its definately worth the wait, they feel great
It's almost certainly going to be Yuri since Massdrop already has them on-hand and is anticipating shipping soon.Wonder what will come first Mira or GMK Yuri.
the keyboard and keyset go hand in hand so well
i hope to **** it's this
i remember ogling the original IC years ago
so glad we're so close
Any updates yet on the delivery front?To sum it up with one word - no.
Any updates yet on the delivery front?To sum it up with one word - ni.
Have I asked - yes.
Wonder what will come first Mira or GMK Yuri.Which colour did you order?
the keyboard and keyset go hand in hand so well
Thanks.Any updates yet on the delivery front?To sum it up with one word - no.
Have I asked - yes.
Went with Blue top, Grey bottomWonder what will come first Mira or GMK Yuri.Which colour did you order?
the keyboard and keyset go hand in hand so well
Yuri officially shipping. RIP.It will take like 3 week's to arrive here in Australia so there is a chance!
The wait goes on.
I guess the new question is "Will MIRA ship before E8?"Plz no
I guess the new question is "Will MIRA ship before E8?"
I guess the new question is "Will MIRA ship before E8?"
I think the real question is will E8 ever ship?
I guess the new question is "Will MIRA ship before E8?"
I guess the new question is "Will MIRA ship before E8?"
The Delayed GB show down: Mira vs E8 vs Dolphin.
The Keyboard Battle Royal on HBO PPV -- Watch it live at 9PM EST on Saturday, October 21st from the Staples Center!
I guess the new question is "Will MIRA ship before E8?"
The Delayed GB show down: Mira vs E8 vs Dolphin.
The Keyboard Battle Royal on HBO PPV -- Watch it live at 9PM EST on Saturday, October 21st from the Staples Center!
I guess the new question is "Will MIRA ship before E8?"
The Delayed GB show down: Mira vs E8 vs Dolphin.
The Keyboard Battle Royal on HBO PPV -- Watch it live at 9PM EST on Saturday, October 21st from the Staples Center!
I'd pay for that
I guess the new question is "Will MIRA ship before E8?"
The Delayed GB show down: Mira vs E8 vs Dolphin.
The Keyboard Battle Royal on HBO PPV -- Watch it live at 9PM EST on Saturday, October 21st from the Staples Center!
I'd pay for that
Wake me up at the end!!
God help me --- it is not in my hands ----waiting like the rest of you.
Hi all,
We got photos of production anodized colors, though I think they are cell phone snaps, so likely not very accurate. I've asked for more in different light conditions. I asked and was told that the Gray does indeed have the green tint in person, which of course you can't see in that photo =/
https://imgur.com/a/wAfQO
Hi all,
We got photos of production anodized colors, though I think they are cell phone snaps, so likely not very accurate. I've asked for more in different light conditions. I asked and was told that the Gray does indeed have the green tint in person, which of course you can't see in that photo =/
https://imgur.com/a/wAfQO
damn
those are nice
blue looks darker than in the sample pics, but i suspect that can be put down to the crappy camera
hopefully more info on shipping soon
While the pictures are nice and all, I'd really like to have the board in hand. Is there any update on the timeline? If not when should we expect these to be completed and shipped?
While the pictures are nice and all, I'd really like to have the board in hand. Is there any update on the timeline? If not when should we expect these to be completed and shipped?
Paitience my friend. As much as I want my board as well, this GB seems way better managed compared to others that I’ve participated in. These things just take longer and require more effort+coordination than it seems, especially when things are being done in a different continent.
[
i'm annoyed at the lack of updates as well, but i know that as soon as ninja hears something we'll know about it
i'm not worried
yes, i think any lack of communication is on EVE's end, which I will faithfully assume means they are diligently working on completing the order.
those boards in the recent pictures are probably the same ones in the last update that EVE sent out.
yes, i think any lack of communication is on EVE's end, which I will faithfully assume means they are diligently working on completing the order.
those boards in the recent pictures are probably the same ones in the last update that EVE sent out.
I assure you they are not the same boards. EVE sometimes is not great at regular updates or communication, which I'm not happy about. But he's not that type of guy providing incorrect information or fake updates. He had some issue with one particular procedure for anodizing and he bought a new machine for that. It took him some time setting up and getting started.
Currently we are just trying to confirm the colors are as expected. We've reached the agreement that blue silver and black are good. Pink and grey is still pending approval, as EVE's photo guy is currently away.
yes, i think any lack of communication is on EVE's end, which I will faithfully assume means they are diligently working on completing the order.
those boards in the recent pictures are probably the same ones in the last update that EVE sent out.
I assure you they are not the same boards. EVE sometimes is not great at regular updates or communication, which I'm not happy about. But he's not that type of guy providing incorrect information or fake updates. He had some issue with one particular procedure for anodizing and he bought a new machine for that. It took him some time setting up and getting started.
Currently we are just trying to confirm the colors are as expected. We've reached the agreement that blue silver and black are good. Pink and grey is still pending approval, as EVE's photo guy is currently away.
yes, i think any lack of communication is on EVE's end, which I will faithfully assume means they are diligently working on completing the order.
those boards in the recent pictures are probably the same ones in the last update that EVE sent out.
I assure you they are not the same boards. EVE sometimes is not great at regular updates or communication, which I'm not happy about. But he's not that type of guy providing incorrect information or fake updates. He had some issue with one particular procedure for anodizing and he bought a new machine for that. It took him some time setting up and getting started.
Currently we are just trying to confirm the colors are as expected. We've reached the agreement that blue silver and black are good. Pink and grey is still pending approval, as EVE's photo guy is currently away.
even more reassuring to see that you are a part of the process, zzjayfree. thanks for helping out! the sooner i get mira, the sooner i get moon! ;p
even more reassuring to see that you are a part of the process, zzjayfree. thanks for helping out! the sooner i get mira, the sooner i get moon! ;p
Will shipping start once colors have been confirmed?
Seriously, this is where I come for updates for moon :D
Seriously, this is where I come for updates for moon :D
Anodizing has become a longer process than any of us have expected. EVE had to purchase and set up a new sand spraying machine and get it done right.. He just completed and sent out whole bunch of Moon boards for Chinese GB. So hopefully Mira is the next and than Moon boards for GH GB. Again, I'm sorry about the long wait.
Seriously, this is where I come for updates for moon :D
Anodizing has become a longer process than any of us have expected. EVE had to purchase and set up a new sand spraying machine and get it done right.. He just completed and sent out whole bunch of Moon boards for Chinese GB. So hopefully Mira is the next and than Moon boards for GH GB. Again, I'm sorry about the long wait.
No worries, just glad to get updates. :)
I didnt realize there was any spraying involved with aluminum anodizing :p
Thanks for the status though.
I didnt realize there was any spraying involved with aluminum anodizing :p
Thanks for the status though.
That would be the sandblasting part for surface prep. The texture you see on anodized surfaces is due to the finish prior to anodizing, as the actual anodized layer is only microns thick.
Reason for delay:Everythings seemed fine for far despite the delays, some things you just cannot change.
multifactorial but the current delay is due to anodizing.
EVE moved his shop and has some new equipment. After finishing blue,grey, and pink were off. Black and silver were fine.
Blue seems to have been corrected so blue, black, and silver are currently being anodized.
Grey and pink - colors may be good but he took pictures with a cell phone in bright light so we are waiting on good pictures. After we get those if the colors are good those colors will start. Boards are made, anodizing is the only hold up.
I apologize about the duration of this group buy. It is my first and I've learned alot. Assuming I do others I will have my "ducks in a row" before I begin.
Reason for delay:
multifactorial but the current delay is due to anodizing.
EVE moved his shop and has some new equipment. After finishing blue,grey, and pink were off. Black and silver were fine.
Blue seems to have been corrected so blue, black, and silver are currently being anodized.
Grey and pink - colors may be good but he took pictures with a cell phone in bright light so we are waiting on good pictures. After we get those if the colors are good those colors will start. Boards are made, anodizing is the only hold up.
I apologize about the duration of this group buy. It is my first and I've learned alot. Assuming I do others I will have my "ducks in a row" before I begin.
Reason for delay:
multifactorial but the current delay is due to anodizing.
EVE moved his shop and has some new equipment. After finishing blue,grey, and pink were off. Black and silver were fine.
Blue seems to have been corrected so blue, black, and silver are currently being anodized.
Grey and pink - colors may be good but he took pictures with a cell phone in bright light so we are waiting on good pictures. After we get those if the colors are good those colors will start. Boards are made, anodizing is the only hold up.
I apologize about the duration of this group buy. It is my first and I've learned alot. Assuming I do others I will have my "ducks in a row" before I begin.
Does this mean MIRA updates soon?
Silver orders will go out first probably the rest follows shortly after
Sent from my iPhone using Tapatalk
Never regret the pink! Pink is the master color.
(https://i.imgur.com/zEPSULOl.jpg) (https://i.imgur.com/zEPSULOl.jpg)
i see. i think of the prototype as a metallic pink whereas the recent picture as more pink/purple.
i think we're in the club of cool kids photo, with the pink boards :)
i see. i think of the prototype as a metallic pink whereas the recent picture as more pink/purple.
i think we're in the club of cool kids photo, with the pink boards :)
Wait, "metallic pink" is a color? :)) On my calibrated photography monitor, I don't see any purple in that shade of pink. Just a cooler-toned light pink. It looks like the pic was taken with some daylight illumination. Warm indoor lighting will give a more peachy tint.
Hey! Sorry If I've missed an answer to this already. Any idea when we will be invoiced for shipping? :) Cheers!
Hey! Sorry If I've missed an answer to this already. Any idea when we will be invoiced for shipping? :) Cheers!
"12 to 16 weeks" ;)
right. it was a tongue-in-cheek jab at the fact none of the time frames have been accurate this year (well, except Duck and LZ)
E8 shipped
MIRA vs Dolphin
i'm so excited for this board
E8 shippedMira vs 910CE for me, if all things go well they should be very very close together
MIRA vs Dolphin
i'm so excited for this board
E8 shippedMira vs 910CE for me, if all things go well they should be very very close together
MIRA vs Dolphin
i'm so excited for this board
Reason for delay:
multifactorial but the current delay is due to anodizing.
EVE moved his shop and has some new equipment. After finishing blue,grey, and pink were off. Black and silver were fine.
Blue seems to have been corrected so blue, black, and silver are currently being anodized.
Grey and pink - colors may be good but he took pictures with a cell phone in bright light so we are waiting on good pictures. After we get those if the colors are good those colors will start. Boards are made, anodizing is the only hold up.
I apologize about the duration of this group buy. It is my first and I've learned alot. Assuming I do others I will have my "ducks in a row" before I begin.
EVE said last night he's waiting on the custom boxes!!!
I've asked for pictures of multiple boards.
Closer to release - I think!!!
MIRA CE that come with no-diffuser when? :rolleyes:
MIRA CE that come with no-diffuser when? :rolleyes:
That's the O'Mira.
MIRA CE that come with no-diffuser when? :rolleyes:
That's the O'Mira.
Those Damned O'mira bois!
MIRA CE that come with no-diffuser when? :rolleyes:
That's the O'Mira.
Those Damned O'mira bois!
The O'Mira boys ride again!
What do you think the chances are of this being shipped before Xmas?
What do you think the chances are of this being shipped before Xmas?
^
if it ships after mid december i won't be able to see it until end of january
curse you college break
What do you think the chances are of this being shipped before Xmas?
^
if it ships after mid december i won't be able to see it until end of january
curse you college break
cant you just change adress if going home for christmas?
I don't know if it will be helpful, Puddsy, but if it looks like shipping will be done over the Christmas break period via some fast shipping option, I can see about asking for your kit to be shipped to me, if you can meet up in Boston to pick it up.
I don't know if it will be helpful, Puddsy, but if it looks like shipping will be done over the Christmas break period via some fast shipping option, I can see about asking for your kit to be shipped to me, if you can meet up in Boston to pick it up.
I'll investigate that option a bit, not sure how I'm getting back at the end of the break, but that's probably the best option for now. I'll be in touch.
What do you think the chances are of this being shipped before Xmas?
Sweet, I'd be pretty happy if 2 out of the 4 group buys I dove into this year arrived before the end of 2017. Worst case, I've got more time to practice my soldering skills :))What do you think the chances are of this being shipped before Xmas?
I wish I knew. I think it should be.
Silver ones are made, just waiting on the custom boxes. The others are being anodized now.
i'm stuck waiting for silent blacks anyway, so i dont think i will be assembling this beauty until january
Let me try this again - hotel provider says geekhack is an unsecure site and booted me off.
https://imgur.com/a/kfjUa (https://imgur.com/a/kfjUa)
I give up. Check the link. There is a light at the end of the tunnel.
Those numpad slots though...
Looking for the blue or pink Mira SE, if you want to sell it, pls PM me!! Thanks.
Show Image(https://i.imgur.com/n6Vb2jm.jpg)
whew. lad. pls
numpad? ???Can the plate have an all 1u keys option? It seems like it, but I wanna make sure.
What numpad?
Oh, you must mean this one! :))Show Image(https://i.imgur.com/UXNqqfxl.png)Show Image(https://i.imgur.com/zuRdWpOl.png)
numpad? ???Can the plate have an all 1u keys option? It seems like it, but I wanna make sure.
What numpad?
Oh, you must mean this one! :))Show Image(https://i.imgur.com/UXNqqfxl.png)Show Image(https://i.imgur.com/zuRdWpOl.png)
Sent from my SM-G935T using Tapatalk
Those numpad slots though...I will be a pretty good idea to keep the heavy ass weight away from your cases.. no dings!
Ninja didn't design moon?I thought they were in the build together. My mistake
You can ask EVE, I if you'd like.
Quick update since ninja is out of town.
We'll be using new customized box now and they are more durable and are great for storage!Show Image(https://imgur.com/qc2UcYO.jpg)Show Image(https://imgur.com/zjN8dCK.jpg)Show Image(https://imgur.com/PxYIz87.jpg)
Also have some pics of finished boards. Once EVE receives all the new boxes he will be starting sending them out! Should be soon tmShow Image(https://imgur.com/3hWsQ1R.jpg)Show Image(https://imgur.com/tKYWZxA.jpg)
Quick update since ninja is out of town.
We'll be using new customized box now and they are more durable and are great for storage!Show Image(https://imgur.com/qc2UcYO.jpg)Show Image(https://imgur.com/zjN8dCK.jpg)Show Image(https://imgur.com/PxYIz87.jpg)
Also have some pics of finished boards. Once EVE receives all the new boxes he will be starting sending them out! Should be soon tmShow Image(https://imgur.com/3hWsQ1R.jpg)Show Image(https://imgur.com/tKYWZxA.jpg)
those custom boxes look dope! i thought the 'custom boxes' were just like special packing/shipping material. what a nice surprise
i dont see how the foam inserts are going to fit into them, though. maybe its a size perspective thing, but looks like either the foam trays will have to be modified or abandoned
5 WKL pink on the spreadsheet but 7 in the pictureSharp eyes. Probably made extra for himself or a friend.
very interesting
First, please take my money for shipping already! :D
Second, interesting new case. I liked the other one (looked more posh), but I see this is more practical. But I liked the previous one. :)
Still waiting on boxesMoney is ready
Interest check for the number pad coming soon!Design is done, have to get PCB's and plans to EVE for the cost.
Hey guys, I’ve got good news. EVE just confirmed he’ll be getting new boxes this weekend and the boards should be rolling out on Monday. I’ll be sending invoices once I received the boards at my proxy and have an accurate cost for shipping. Invoice will be coming from EasonZhang99@gmail.com.Excited as hell but my god awful timing so close to Christmas for having money 👌
This is also a good idea to confirm your order details and shipping address. Once you’ve paid the invoice and the boards should be arriving at your door step within a week. Hopefully before Xmas!
Ninja if you could back me up so people wouldn’t have any doubts paying. Thanks everyone.
Sent from my iPhone using Tapatalk
Hey guys, I’ve got good news. EVE just confirmed he’ll be getting new boxes this weekend and the boards should be rolling out on Monday. I’ll be sending invoices once I received the boards at my proxy and have an accurate cost for shipping. Invoice will be coming from EasonZhang99@gmail.com.Excited as hell but my god awful timing so close to Christmas for having money
This is also a good idea to confirm your order details and shipping address. Once you’ve paid the invoice and the boards should be arriving at your door step within a week. Hopefully before Xmas!
Ninja if you could back me up so people wouldn’t have any doubts paying. Thanks everyone.
Sent from my iPhone using Tapatalk
If our shipping address is different from the one we specified initially, should we just use the new address when paying for the shipping invoice?This. I'm not even sure what the original address I put is unfortunately
If our shipping address is different from the one we specified initially, should we just use the new address when paying for the shipping invoice?
This. I'm not even sure what the original address I put is unfortunately
Hey guys, I’ve got good news. EVE just confirmed he’ll be getting new boxes this weekend and the boards should be rolling out on Monday. I’ll be sending invoices once I received the boards at my proxy and have an accurate cost for shipping. Invoice will be coming from EasonZhang99@gmail.com.
This is also a good idea to confirm your order details and shipping address. Once you’ve paid the invoice and the boards should be arriving at your door step within a week. Hopefully before Xmas!
Ninja if you could back me up so people wouldn’t have any doubts paying. Thanks everyone.
Sent from my iPhone using Tapatalk
YES
I'm hype.
YES
I'm hype.
Me too man. So excited!!
Have these keyboards and the moon not shipped yet? I've only been in the geekhack community since august so I don't know much.
Where they delayed?
By any chance do you know if there will be any extras that will be sold of either one?
Will the boards still be shipped through DHL? For people with multiple orders, are the boards going to combined into a single package or shipped as separate ones?
Yup, same goes for Austria.Will the boards still be shipped through DHL? For people with multiple orders, are the boards going to combined into a single package or shipped as separate ones?
Oh lordy, I hope not DHL. Their processing fee in Belgium is gigantic :(
The new boxes are here! https://imgur.com/a/0UXwa
Packaging is the next and they will be sent to my proxy and invoice will follow!
The new boxes are here! https://imgur.com/a/0UXwa
Packaging is the next and they will be sent to my proxy and invoice will follow!
Do you think that the MIRA is going to ship before Christmas? I fear that there‘ll be another delay due to the Christmas break.
so, where are we at right now? the kits are done and custom cases are on hand. are we just waiting for packing materials to reach EVE so he can pack and ship?
its not clear to me why these last few steps are taking so long.. seems like shipping could have been happening by now with a little better preparation.
any updates?
any updates?
According to zzyjayfree on slack, the boards are on their way to his proxy in Guangzhou, China. After they are received at the shipping proxy, the shipping invoices will be calculated and sent out to the gb participants. Then, numbered boards will be shipped out first then the other boards. DHL shipping.
;)
;)
pretty ballsy just droppin a smiley face here near the end of the gb. thought you disappeared like ivan
;)
pretty ballsy just droppin a smiley face here near the end of the gb. thought you disappeared like ivan
Yes, I'm not really sure what the point of that is, but it's not a good one.
;)
;)
Merry Christmas!
The first 20 have arrived at the proxy.
Shipping invoices should be coming to the lucky ones!
Merry Christmas!WeW, Hopefully the holidays don't slow down shipping all that much.
The first 20 have arrived at the proxy.
Shipping invoices should be coming to the lucky ones!
Merry Christmas!WeW, Hopefully the holidays don't slow down shipping all that much.
The first 20 have arrived at the proxy.
Shipping invoices should be coming to the lucky ones!
Merry Christmas!WeW, Hopefully the holidays don't slow down shipping all that much.
The first 20 have arrived at the proxy.
Shipping invoices should be coming to the lucky ones!
Please make sure you take advantage of this shipping invoice to verify your order details and shipping address. Paying the invoice does give your consent that order and shipping info are correct as stated in the invoice. If you noticed ANY discrepancy, please hold onto the invoice and inform me immediately. Thanks!
In what order are the boards being shipped out?
Please make sure you take advantage of this shipping invoice to verify your order details and shipping address. Paying the invoice does give your consent that order and shipping info are correct as stated in the invoice. If you noticed ANY discrepancy, please hold onto the invoice and inform me immediately. Thanks!
90 AUD
90 AUD
Wow, thats a lot.
Wondering how much I will have to pay for shipping to Poland :P
Edit: just got my invoice, 50$ is not that bad :P
WEW invoice paid.
shipping still makes me cry at 90 AUD but I cannot wait to have it in hand.
So hype! Will be here Tuesday :D. Can't wait to see pictures of everybody's builds!
Current status: First two batches of 40 boards has arrived my proxy. All shipping invoices sent, 29 of which have been paid and I've informed my proxy. 10 boards are already on their way to buyer. The third batch of 47 boards are sent by EVE today. HYPE!
Current status: First two batches of 40 boards has arrived my proxy. All shipping invoices sent, 29 of which have been paid and I've informed my proxy. 10 boards are already on their way to buyer. The third batch of 47 boards are sent by EVE today. HYPE!
All shipping invoices sent in total as in 125? Or did you mean all of the 40 shipping invoices sent, 29 of which have been paid? Please specify.
I still have not received an invoice.
Current status: First two batches of 40 boards has arrived my proxy. All shipping invoices sent, 29 of which have been paid and I've informed my proxy. 10 boards are already on their way to buyer. The third batch of 47 boards are sent by EVE today. HYPE!
All shipping invoices sent in total as in 125? Or did you mean all of the 40 shipping invoices sent, 29 of which have been paid? Please specify.
I still have not received an invoice.
Same - I haven’t seen an invoice either, so I’m a bit confused.
the price of living with a direct view of the ocean I suppose.90 AUD
Wow, thats a lot.
Wondering how much I will have to pay for shipping to Poland :P
Edit: just got my invoice, 50$ is not that bad :PWEW invoice paid.
shipping still makes me cry at 90 AUD but I cannot wait to have it in hand.
it was because sissy is at a "remote" area in Aus, there's a remote fee added. For most people shipping is between $50-ish as expected. And for Russian fellas it's gonna be expensive anyways... The lowest I've seen is $24 to Singapore :cool:
it wasn't too bad for Poland tho. :p
I have not received a shipping invoice. I suspect it might have something to do me not being the original owner of board #47 (I purchased the spot from someone else).
I have not received a shipping invoice. I suspect it might have something to do me not being the original owner of board #47 (I purchased the spot from someone else).
Shipping invoice paid =D
Shipping invoice paid =D
Thanks, doing 40 or so invoices today. Check your inbox sometime in like 2 hours
AND ALWAYS CHECK IF YOUR ORDER DETAILS AND SHIPPING ADDRESS!
Shipping invoice paid =D
Thanks, doing 40 or so invoices today. Check your inbox sometime in like 2 hours
AND ALWAYS CHECK IF YOUR ORDER DETAILS AND SHIPPING ADDRESS!
Invoice paid and address confirmed!
Thanks to everyone for getting us this far!
Any idea how many are left to ship? I guess I ended up on the bottom of the pile ;DShipping invoice paid =D
Thanks, doing 40 or so invoices today. Check your inbox sometime in like 2 hours
AND ALWAYS CHECK IF YOUR ORDER DETAILS AND SHIPPING ADDRESS!
Invoice paid!I believe the weight (regardless of numbered or not) is what you pick when you place the order.
This might be a dumb question, but is the numbered weight brass?
yeah you had to pick which material when ordering - can be checked here: https://docs.google.com/spreadsheets/d/1TCDZcFQ9xTXeYg5rAniPHBbrZ67OtDi7PlLL6u8hcXI/edit#gid=0Invoice paid!I believe the weight (regardless of numbered or not) is what you pick when you place the order.
This might be a dumb question, but is the numbered weight brass?
Sent from my Pixel XL using Tapatalk
Hey Eason, I just wanted to confirm if you received my email about my missing phone number. So sad... I feel like if I had that filled out, I would have been one of the ones who have received their shipping invoice :(
yeah you had to pick which material when ordering - can be checked here: https://docs.google.com/spreadsheets/d/1TCDZcFQ9xTXeYg5rAniPHBbrZ67OtDi7PlLL6u8hcXI/edit#gid=0Invoice paid!I believe the weight (regardless of numbered or not) is what you pick when you place the order.
This might be a dumb question, but is the numbered weight brass?
Sent from my Pixel XL using Tapatalk
Any idea how many are left to ship? I guess I ended up on the bottom of the pile ;DShipping invoice paid =D
Thanks, doing 40 or so invoices today. Check your inbox sometime in like 2 hours
AND ALWAYS CHECK IF YOUR ORDER DETAILS AND SHIPPING ADDRESS!
Sweet, we are getting close to the finish line! Looking forward to building this in the new yearAny idea how many are left to ship? I guess I ended up on the bottom of the pile ;DShipping invoice paid =D
Thanks, doing 40 or so invoices today. Check your inbox sometime in like 2 hours
AND ALWAYS CHECK IF YOUR ORDER DETAILS AND SHIPPING ADDRESS!
If I did my math correctly, 38.
Sent from my iPhone using Tapatalk
Just updated some tracking numbers. Now we have 28 tracking numbers in total. A LOT MORE to come tomorrow.Oh man, Its so sudden I cannot wait. Wonder how long mine will take to arrive
Also looks like at least one of us has received MIRA SE! Let's wait for pictures... I'm excited and nervous too!
Just updated some tracking numbers. Now we have 28 tracking numbers in total. A LOT MORE to come tomorrow.What carrier is the tracking for? :confused:
Also looks like at least one of us has received MIRA SE! Let's wait for pictures... I'm excited and nervous too!
Now if you noticed anything not matching your order or missing, please let me know within 7 days for warranty
Just updated some tracking numbers. Now we have 28 tracking numbers in total. A LOT MORE to come tomorrow.What carrier is the tracking for? :confused:
Also looks like at least one of us has received MIRA SE! Let's wait for pictures... I'm excited and nervous too!
Now if you noticed anything not matching your order or missing, please let me know within 7 days for warranty
Just updated some tracking numbers. Now we have 28 tracking numbers in total. A LOT MORE to come tomorrow.What carrier is the tracking for? :confused:
Also looks like at least one of us has received MIRA SE! Let's wait for pictures... I'm excited and nervous too!
Now if you noticed anything not matching your order or missing, please let me know within 7 days for warranty
DHL for CONUS I think
81 and 82 have shipping
but alas, 80 does not, and the wait continues
81 and 82 have shipping
but alas, 80 does not, and the wait continues
Still in processing I guess, your order is one of the 35 boards I submitted on Sunday but they are off on Monday. Should be soon™
I just opened the door for the DHL guy...
Finally!
(Attachment Link) (Attachment Link) (Attachment Link)
I just opened the door for the DHL guy...
Finally!
(Attachment Link) (Attachment Link) (Attachment Link)
I received my MIRA today. I was given a WKL 7u stab set instead of 6.25u, but I can source a 6.25u wire. That aside, the packaging was done well.
I received my MIRA today. I was given a WKL 7u stab set instead of 6.25u, but I can source a 6.25u wire. That aside, the packaging was done well.
no pics :(
I received my MIRA today. I was given a WKL 7u stab set instead of 6.25u, but I can source a 6.25u wire. That aside, the packaging was done well.
no pics :(Show Image(https://i.imgur.com/FFF2Hu1.jpg)
I received my MIRA today. I was given a WKL 7u stab set instead of 6.25u, but I can source a 6.25u wire. That aside, the packaging was done well.
no pics :(Show Image(https://i.imgur.com/FFF2Hu1.jpg)
very nice
thank you
the grey turned out v good
I received my MIRA today. I was given a WKL 7u stab set instead of 6.25u, but I can source a 6.25u wire. That aside, the packaging was done well.
thanks for the update, i'm gonna sit here and refresh the sheet now
thanks for the update, i'm gonna sit here and refresh the sheet nowmine arrived in Melbourne today, it will take longer to come from Melb to SA than it will for it did to travel from china to Melb. this week is gonna be torture
thanks for the update, i'm gonna sit here and refresh the sheet now
Updated yours in advance in order to save your F5 key
thanks for the update, i'm gonna sit here and refresh the sheet now
Updated yours in advance in order to save your F5 key
thank you :)
now to aggressively refresh the tracking until it shows up
thanks for the update, i'm gonna sit here and refresh the sheet now
Updated yours in advance in order to save your F5 key
thanks for the update, i'm gonna sit here and refresh the sheet now
Updated yours in advance in order to save your F5 key
Tracking update finished.
Just arrived and oh man it's beautiful! Thank you so much everyone for the work put into this!
Lovely, the blue turn out great!
Mine is arriving today. I can't wait.
Blue turned out fantastic! Great stuff :-)
Wow, seeing all these photos makes me regret selling my spot.
Despite the delays, NinjaDoC and PhotoE's communication and service has been spot on :thumb: GB runners could learn a few things from here.
Received mine today and I'm absolutely thrilled with it! Really appreciate all the hard work from the multiple people that made this possible, thank you all so much!
I felt I had to post a few pictures as I don't think anybody has posted a blue one yet. Sorry for the awful lighting and crappy phone photos but I figured it's better than nothing =]Show Image(https://i.imgur.com/vpvHkvE.jpg)Show Image(https://i.imgur.com/63g3dU0.jpg)Show Image(https://i.imgur.com/lmUugNV.jpg)Show Image(https://i.imgur.com/fYjXYJF.jpg)
Blue turned out fantastic! Great stuff :-) what's in the pink bubble wrap?
Wow, seeing all these photos makes me regret selling my spot.
Despite the delays, NinjaDoC and PhotoE's communication and service has been spot on :thumb: GB runners could learn a few things from here.
i hate to say i told you so but i have the screenshots to prove itReceived mine today and I'm absolutely thrilled with it! Really appreciate all the hard work from the multiple people that made this possible, thank you all so much!
I felt I had to post a few pictures as I don't think anybody has posted a blue one yet. Sorry for the awful lighting and crappy phone photos but I figured it's better than nothing =]Show Image(https://i.imgur.com/vpvHkvE.jpg)Show Image(https://i.imgur.com/63g3dU0.jpg)Show Image(https://i.imgur.com/lmUugNV.jpg)Show Image(https://i.imgur.com/fYjXYJF.jpg)
Very nice :)
The blue turned out awesome.Blue turned out fantastic! Great stuff :-) what's in the pink bubble wrap?
Maybe stabs? Numbered weights got stabs.
Wow, seeing all these photos makes me regret selling my spot.
Despite the delays, NinjaDoC and PhotoE's communication and service has been spot on :thumb: GB runners could learn a few things from here.
i hate to say i told you so but i have the screenshots to prove itReceived mine today and I'm absolutely thrilled with it! Really appreciate all the hard work from the multiple people that made this possible, thank you all so much!
I felt I had to post a few pictures as I don't think anybody has posted a blue one yet. Sorry for the awful lighting and crappy phone photos but I figured it's better than nothing =]Show Image(https://i.imgur.com/vpvHkvE.jpg)Show Image(https://i.imgur.com/63g3dU0.jpg)Show Image(https://i.imgur.com/lmUugNV.jpg)Show Image(https://i.imgur.com/fYjXYJF.jpg)
Very nice :)
The blue turned out awesome.Blue turned out fantastic! Great stuff :-) what's in the pink bubble wrap?
Maybe stabs? Numbered weights got stabs.
Yeh, wot Puddsy said ^
Interested to hear what switches everyone is going with for their build? I think I'm going to go with some silent blacks I have (not from the unfortunately dodgy batch recently). Seems to be a lot of different switches that have emerged in the past 6 months or so that I haven't tried though and I'm interested to see the consensus on what's good and what isn't.
Wow, seeing all these photos makes me regret selling my spot.
Despite the delays, NinjaDoC and PhotoE's communication and service has been spot on :thumb: GB runners could learn a few things from here.
i hate to say i told you so but i have the screenshots to prove itReceived mine today and I'm absolutely thrilled with it! Really appreciate all the hard work from the multiple people that made this possible, thank you all so much!
I felt I had to post a few pictures as I don't think anybody has posted a blue one yet. Sorry for the awful lighting and crappy phone photos but I figured it's better than nothing =]Show Image(https://i.imgur.com/vpvHkvE.jpg)Show Image(https://i.imgur.com/63g3dU0.jpg)Show Image(https://i.imgur.com/lmUugNV.jpg)Show Image(https://i.imgur.com/fYjXYJF.jpg)
Very nice :)
The blue turned out awesome.Blue turned out fantastic! Great stuff :-) what's in the pink bubble wrap?
Maybe stabs? Numbered weights got stabs.
Yeh, wot Puddsy said ^
Interested to hear what switches everyone is going with for their build? I think I'm going to go with some silent blacks I have (not from the unfortunately dodgy batch recently). Seems to be a lot of different switches that have emerged in the past 6 months or so that I haven't tried though and I'm interested to see the consensus on what's good and what isn't.
I got a blue MIRA with silver plate and will be going for lubed Tealios. I cannot wait. I'm dying from the excitement!
Sent from my SM-G935T using Tapatalk
Wow, seeing all these photos makes me regret selling my spot.
Despite the delays, NinjaDoC and PhotoE's communication and service has been spot on :thumb: GB runners could learn a few things from here.
i hate to say i told you so but i have the screenshots to prove itReceived mine today and I'm absolutely thrilled with it! Really appreciate all the hard work from the multiple people that made this possible, thank you all so much!
I felt I had to post a few pictures as I don't think anybody has posted a blue one yet. Sorry for the awful lighting and crappy phone photos but I figured it's better than nothing =]Show Image(https://i.imgur.com/vpvHkvE.jpg)Show Image(https://i.imgur.com/63g3dU0.jpg)Show Image(https://i.imgur.com/lmUugNV.jpg)Show Image(https://i.imgur.com/fYjXYJF.jpg)
Very nice :)
The blue turned out awesome.Blue turned out fantastic! Great stuff :-) what's in the pink bubble wrap?
Maybe stabs? Numbered weights got stabs.
Yeh, wot Puddsy said ^
Interested to hear what switches everyone is going with for their build? I think I'm going to go with some silent blacks I have (not from the unfortunately dodgy batch recently). Seems to be a lot of different switches that have emerged in the past 6 months or so that I haven't tried though and I'm interested to see the consensus on what's good and what isn't.
Ah that makes sense :-)
Also going with silent blacks! Same as you, not from the recent GB. just built a board with some and I absolutely love them, so got to go with them again for the MIRA and this time I'll be lubing. Just waiting for them to arrive! :-)
Wow, seeing all these photos makes me regret selling my spot.
Despite the delays, NinjaDoC and PhotoE's communication and service has been spot on :thumb: GB runners could learn a few things from here.
i hate to say i told you so but i have the screenshots to prove itReceived mine today and I'm absolutely thrilled with it! Really appreciate all the hard work from the multiple people that made this possible, thank you all so much!
I felt I had to post a few pictures as I don't think anybody has posted a blue one yet. Sorry for the awful lighting and crappy phone photos but I figured it's better than nothing =]Show Image(https://i.imgur.com/vpvHkvE.jpg)Show Image(https://i.imgur.com/63g3dU0.jpg)Show Image(https://i.imgur.com/lmUugNV.jpg)Show Image(https://i.imgur.com/fYjXYJF.jpg)
Very nice :)
The blue turned out awesome.Blue turned out fantastic! Great stuff :-) what's in the pink bubble wrap?
Maybe stabs? Numbered weights got stabs.
Yeh, wot Puddsy said ^
Interested to hear what switches everyone is going with for their build? I think I'm going to go with some silent blacks I have (not from the unfortunately dodgy batch recently). Seems to be a lot of different switches that have emerged in the past 6 months or so that I haven't tried though and I'm interested to see the consensus on what's good and what isn't.
78g R8 Zealios because I wanted something very tactile.
i got some bsun browns for cheap
put in some MX black springs and MX clear stems that i recycled from another build
kinda like a zealio but i made it with my trash, they're pretty nice
i've also got some 62g silents (old batch, not from the GB) i might use for my second PCB, but i may end up using them in another build and using 62g lubed blacks for this instead
or maybe even gateron yellows, because deep down i'm a bit of an anarchist
pretty excited no matter what i end up using
Wow, seeing all these photos makes me regret selling my spot.
Despite the delays, NinjaDoC and PhotoE's communication and service has been spot on :thumb: GB runners could learn a few things from here.
i hate to say i told you so but i have the screenshots to prove it
Some pictures!Show Image(https://i.imgur.com/3myNd0k.jpg)Show Image(https://i.imgur.com/yWOCGn1.jpg)Show Image(https://i.imgur.com/RZiPgGq.jpg)Show Image(https://i.imgur.com/IEaodZO.jpg)Show Image(https://i.imgur.com/kSFZxPZ.jpg)
Some pictures!Show Image(https://i.imgur.com/3myNd0k.jpg)Show Image(https://i.imgur.com/yWOCGn1.jpg)Show Image(https://i.imgur.com/RZiPgGq.jpg)Show Image(https://i.imgur.com/IEaodZO.jpg)Show Image(https://i.imgur.com/kSFZxPZ.jpg)
damn, silver so nice
makes me even happier with my choice
Is anyone else still waiting on delivery information, it has been like two days!?
Is anyone else still waiting on delivery information, it has been like two days!?
i believe eason said that there are still a few boards that have not arrived at the proxy
I gotta stop checking this thread until I get tracking, it's making me crazy :p
14 more boards are on their way to my proxy!
I still haven't gotten a shipping invoice even... Anyone else?
Got my blue board today. YEE
Should we put on bumpons for the board to not scratch from the table?
Got my blue board today. YEE
Should we put on bumpons for the board to not scratch from the table?
Is anyone else still waiting on delivery information, it has been like two days!?I'm waiting on my board
I don't think the board comes with bumpon feet, but it's a good idea. I have a sheet with some small round transparent 3M bumpon feet I got from mouser ages ago--I'll probably use those when I get my kit, although maybe not (have a large mousepad across much of my desk).
edit: some eBay options:
https://www.ebay.com/sch/i.html?_odkw=3m+bumpon+feet&LH_PrefLoc=3&_sop=15&_osacat=0&_from=R40&_trksid=m570.l1313&_nkw=3m+bumpon+feet+clear&_sacat=0
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap
worth buying
in case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbsBrass or SS weight?
this makes it one of the top 5 heaviest TKLs
Brassin case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbsBrass or SS weight?
this makes it one of the top 5 heaviest TKLs
Sent from my Pixel 2 XL using Tapatalk
Just got mine in today - looks amazingIts inside the pink heart shaped bubblewrap.
When can we expect the Gold Zeal stabs?
Just got mine in today - looks amazingIts inside the pink heart shaped bubblewrap.
When can we expect the Gold Zeal stabs?
----------
Looks like I received the wrong stabs too. I believe I asked for a 6.25u and not 7. Also I got board no. 15 and this one says 23.Show Image(https://uploads.tapatalk-cdn.com/20180104/78cca06a10c51e9b75c8d4a217ed4792.jpg)
Sent from my SM-G955U using Tapatalk
We're aware of the issue. I numbered the stabilizers with the stabilizer wire size and a matching number to the Mira...There seems to have been a packing mistake and random bags were packed into the numbered Mira cases. We're waiting for everyone to get their boards and see how many have the wrong wire size before coming to a resolution.
We're aware of the issue. I numbered the stabilizers with the stabilizer wire size and a matching number to the Mira...There seems to have been a packing mistake and random bags were packed into the numbered Mira cases. We're waiting for everyone to get their boards and see how many have the wrong wire size before coming to a resolution.
Thanks. Your build came out beautiful!Brassin case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbsBrass or SS weight?
this makes it one of the top 5 heaviest TKLs
Sent from my Pixel 2 XL using Tapatalk
Thanks. Your build came out beautiful!Brassin case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbsBrass or SS weight?
this makes it one of the top 5 heaviest TKLs
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
14 more boards are on their way to my proxy!I still haven't gotten a shipping invoice even... Anyone else?
shed some light onto your question
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap
worth buying
14 more boards are on their way to my proxy!I still haven't gotten a shipping invoice even... Anyone else?
shed some light onto your question
I was curious if anyone else hadn't received their shipping invoice yet, or if I was the only one/forgotten. But it seems like someone else also did not get their shipping invoice yet. So excited for the board!
Mine has the wrong number (07 vs 57) but I lucked out and got the 7u I was after
Looks like I received the wrong stabs too. I believe I asked for a 6.25u and not 7. Also I got board no. 15 and this one says 23.
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap
worth buying
I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.Show Image(https://images-na.ssl-images-amazon.com/images/I/61liLgden7L._SY450_.jpg)
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap
worth buying
I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.Show Image(https://images-na.ssl-images-amazon.com/images/I/61liLgden7L._SY450_.jpg)
Those are nicer than bumpons! Where do you buy those? Are they on Amazon? Not even sure what they're called ^-^
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap
worth buying
I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.Show Image(https://images-na.ssl-images-amazon.com/images/I/61liLgden7L._SY450_.jpg)
Those are nicer than bumpons! Where do you buy those? Are they on Amazon? Not even sure what they're called ^-^
Agree! I've already put bumpons on mine but I went looking round the shops for some of those black rectangular ones today but couldn't find anything.
Mine has the wrong number (07 vs 57) but I lucked out and got the 7u I was afterLooks like I received the wrong stabs too. I believe I asked for a 6.25u and not 7. Also I got board no. 15 and this one says 23.
Please--this is very important--let us know these things in PM right away!
Did you guys mean that your stabilizer baggies say the wrong number on them, but the weights you got are still engraved with the correct number?
Again, if you receive parts not exactly as you ordered, please PM myself, zzyjayfree, and ninjadoc ASAP! I have a list going to keep track of stuff too.
I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.Show Image(https://images-na.ssl-images-amazon.com/images/I/61liLgden7L._SY450_.jpg)
We're aware of the issue. I numbered the stabilizers with the stabilizer wire size and a matching number to the Mira...There seems to have been a packing mistake and random bags were packed into the numbered Mira cases. We're waiting for everyone to get their boards and see how many have the wrong wire size before coming to a resolution.
Thank you. I think I have an extra 6.25 from my last build. If @aznairjordan is conus and needs this 7u stab, I can ship it to him tomorrow. Just need shipping info.
My shipment arrived today, here are some quick shots:
(Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link)
;D
Show Image(https://i.imgur.com/HMnxTsy.jpg)Show Image(https://i.imgur.com/obs4qjt.jpg)Show Image(https://i.imgur.com/GFheprJ.jpg)
Quick potato photos in the dying light.
67g Zeliostotles, zeal stabs.
really glad I went with the pink plate I think it ties it all together perfectly.
All colours look stunning! Can‘t wait for mine to arrive.
What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.
All colours look stunning! Can‘t wait for mine to arrive.
What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.
Current status: First two batches of 40 boards has arrived my proxy. All shipping invoices sent, 29 of which have been paid and I've informed my proxy. 10 boards are already on their way to buyer. The third batch of 47 boards are sent by EVE today. HYPE!
Check if your boards are shipped here: https://docs.google.com/spreadsheets/d/1TCDZcFQ9xTXeYg5rAniPHBbrZ67OtDi7PlLL6u8hcXI/edit#gid=0
Depending your location, your board maybe shipped by DPEX, DHL or EMS
Start with 5: https://dpex.com/Tools-And-Applications/Track-And-Trace
Start with 3, 6 or 8: http://www.dhl.com/en/express/tracking.html
Start with EV: https://www.ems.post/en/global-network/tracking
For EMS only, once the package enters your country, you can track it from your national post service for more detailed information.
Let me know if you have any questions. Thanks.
Eason
Stupid me, I‘ve just checked my messages again and it came from DHL. But yes, DHL seems to be the carrier, thanks.All colours look stunning! Can‘t wait for mine to arrive.
What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.
Have you tried DHL?
I must have missed that bit, thanks!All colours look stunning! Can‘t wait for mine to arrive.
What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.
https://geekhack.org/index.php?topic=87310.msg2541036#msg2541036Current status: First two batches of 40 boards has arrived my proxy. All shipping invoices sent, 29 of which have been paid and I've informed my proxy. 10 boards are already on their way to buyer. The third batch of 47 boards are sent by EVE today. HYPE!
Check if your boards are shipped here: https://docs.google.com/spreadsheets/d/1TCDZcFQ9xTXeYg5rAniPHBbrZ67OtDi7PlLL6u8hcXI/edit#gid=0
Depending your location, your board maybe shipped by DPEX, DHL or EMS
Start with 5: https://dpex.com/Tools-And-Applications/Track-And-Trace
Start with 3, 6 or 8: http://www.dhl.com/en/express/tracking.html
Start with EV: https://www.ems.post/en/global-network/tracking
For EMS only, once the package enters your country, you can track it from your national post service for more detailed information.
Let me know if you have any questions. Thanks.
Eason
Show Image(https://i.imgur.com/HMnxTsy.jpg)Show Image(https://i.imgur.com/obs4qjt.jpg)Show Image(https://i.imgur.com/GFheprJ.jpg)
Quick potato photos in the dying light.
67g Zeliostotles, zeal stabs.
really glad I went with the pink plate I think it ties it all together perfectly.
Show Image(https://i.imgur.com/HMnxTsy.jpg)Show Image(https://i.imgur.com/obs4qjt.jpg)Show Image(https://i.imgur.com/GFheprJ.jpg)
Quick potato photos in the dying light.
67g Zeliostotles, zeal stabs.
really glad I went with the pink plate I think it ties it all together perfectly.
Update potatoes!
(Attachment Link)
(Attachment Link)
(Attachment Link)
Box Navys, Zeal stablizers, stainless steel back-plate / weight, R2 SA Calm Depths, Faded Skies Birb.
I'm not quite sure how I feel about the color matching quite yet, I'll probably try some more sets out
This is the most amazing shade of blue I've ever seen, what is it called? Blue-grey?
This is the most amazing shade of blue I've ever seen, what is it called? Blue-grey?
The keyset colorway is Calm Depths. Also, please no one mention the upside-down key, I rushed it :(
Just missing solarized dark keyset.Show Image(https://uploads.tapatalk-cdn.com/20180107/2523b006949aa11480c3ca10e712c02b.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180107/378d2f842aa5eacec1b1efb3e1cbacdc.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180107/9ad13bf4371fb834ace1d255c38f00aa.jpg)
Sent from my SM-G955U using Tapatalk
I’m still waiting for my shipping invoice, the wait is killing me, haha.
I’m so excited though.
Did anyone get bumpon feet or will we have to source them?
i use a super large mousepad for my current board and i love it since the keyboard can just sit on it. it allows for relatively low friction movement too in case im sitting at a different angle/using my keyboard in a weird spot.
i feel like the bumpons would take away from the dimensions of the board, which i absolutely adore.
i use a super large mousepad for my current board and i love it since the keyboard can just sit on it. it allows for relatively low friction movement too in case im sitting at a different angle/using my keyboard in a weird spot.
i feel like the bumpons would take away from the dimensions of the board, which i absolutely adore.
They would have if they height wasn't considered in the design. That is why I didn't add them later and the GB was dragging on too long which was my fault.
Just a short feedback from my side. I‘ve just got the parcel from DHL and couldn‘t wait to see how it turned out and honestly, I‘m impressed. From a first glance, I couldn‘t see a single dent or bump, the board looks stunning.
Thanks to everyone of you who participated and did something for that GB. It‘s been a long journey and took longer than all of us wanted. But in the end, it doesn‘t matter (at least to me) if it takes a bit longer, given that the end product is top-notch.
Thank you!
Still no shipping invoice with me... :(
(Attachment Link)
(Attachment Link)
Super stoked that it's finally here! Thanks to everyone that made gb happen :)
One problem though, I ordered an extra plate and I received a WK plate instead of WKL. Also, my weight is #24 (correct) but I received #35 stabilizers.
edit: pm sent to Photoelectric.
(Attachment Link)
(Attachment Link)
Super stoked that it's finally here! Thanks to everyone that made gb happen :)
One problem though, I ordered an extra plate and I received a WK plate instead of WKL. Also, my weight is #24 (correct) but I received #35 stabilizers.
edit: pm sent to Photoelectric.
The plate is the same regardless of the layout you have lol
(Attachment Link)
(Attachment Link)
Super stoked that it's finally here! Thanks to everyone that made gb happen :)
One problem though, I ordered an extra plate and I received a WK plate instead of WKL. Also, my weight is #24 (correct) but I received #35 stabilizers.
edit: pm sent to Photoelectric.
The plate is the same regardless of the layout you have lol
Noted!
I've just noticed... Is that... heart-shaped bubbles on the purple wrap? :eek:
This is so dope! I did receive a 7u instead of 6.25u stabilizer bar. Horrible cell phone image, but this looks amazing! Can't wait to build it.Show Image(https://imgur.com/a/ze5wa)
Noted!
I've just noticed... Is that... heart-shaped bubbles on the purple wrap? :eek:
also, ekusen i got your stabs but imma keep em :p
I received my board as well.
I can't believe how nice the blue turned out.
Just snap a quick pic with my cell phone. I got #55 board and also received #19 7U WKL stabs.
(Attachment Link)
Here's my Night Sky Blue MIRA: 67g Zealios, Gold Stabilizers, GMK Yuri. Perfect combo for me.
I'm so happy to see it on my desk. It was worth wating.
Thank you ninjadoc, zzjayfree, Photoelectric, EVE and everyone elso contributing to this GB.
Silver is looking sharp, Puddsy! :thumb:
It's here (Attachment Link)
This one for you, photoe (Attachment Link)
I got a 7x spacebar stabilizer (set #52) for my 6.25x board (#18).
I got a 7x spacebar stabilizer (set #52) for my 6.25x board (#18).
It's here (Attachment Link)
This one for you, photoe (Attachment Link)
Swoon... I like the silver case a lot too.
It's here (Attachment Link)
This one for you, photoe (Attachment Link)
Swoon... I like the silver case a lot too.
Yeah, it turned out real nice. Feels the same as my macbook, which is a huge plus. If you remember me asking you about the chalkboard/skinripper finish, this isn't it. I'm really happy with it.
There's a small scratch on the plate, and whoever cleaned it could have done it with cleaner hands, but it's nothing worth fussing over. I'm just glad to finally have my board.
Show Image(https://i.imgur.com/YQV5IQC.jpg)
I cannot wait to do this build. I just can't. :eek: :D :D :D :D
Show Image(https://farm5.staticflickr.com/4610/25753122488_ed01e5c995_h.jpg)Show Image(https://farm5.staticflickr.com/4652/25753121238_40e7daa367_h.jpg)Show Image(https://farm5.staticflickr.com/4763/25753120688_a5cad2b5a9_h.jpg)Show Image(https://farm5.staticflickr.com/4724/38728239295_46c1ac5ea4_h.jpg)
It's here (Attachment Link)
This one for you, photoe (Attachment Link)
Ninjadoc nice work~!!! :thumb:
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap
worth buying
I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.Show Image(https://images-na.ssl-images-amazon.com/images/I/61liLgden7L._SY450_.jpg)
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap
worth buying
I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.Show Image(https://images-na.ssl-images-amazon.com/images/I/61liLgden7L._SY450_.jpg)
Where are you going to get them? What's the name of the rectangular bumpons? Can you post a link? Thanks.
I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.Show Image(https://images-na.ssl-images-amazon.com/images/I/61liLgden7L._SY450_.jpg)
Just did a reverse image search...
https://www.amazon.com/SoftTouch-Self-Stick-Non-Slip-Surface-Grip/dp/B000SL0KJC
also, wondering about stainless steel diffuser - much like the ones kin has made for TX1800-V2
and any update on the numpad? is that just ready to go when Mira is all done?
I have the CAD files for both.
I was waiting till EVE and zzyjayfree had finished with shipping to get an idea of timeline.
I need to know how many alps PCB's to order from Leeku too.
I also need an idea of how many of the TX87 PCB's I need to order.
I need to check on the stainless plate to replace the diffuser - I probably need a different CAD file for it.
I'm sorry about the delay on all of these - EVE wanted to wait till after the Mira was shipped before discussing plates and the keypad.
These are looking great, haven't seen much Lunary Grey posted yet though :-X
I cannot push in my zealios switches into the PCB flush, it seems like the tolerances of this PCB for switch mounts are undersized. Has anyone else had this problem? Did anyone clip PCB mounts on switches?
I cannot push in my zealios switches into the PCB flush, it seems like the tolerances of this PCB for switch mounts are undersized. Has anyone else had this problem? Did anyone clip PCB mounts on switches?
These are looking great, haven't seen much Lunary Grey posted yet though :-X
I posted my lunar grey
These are looking great, haven't seen much Lunary Grey posted yet though :-X
I posted my lunar grey
Oh :))
Looking good!
I cannot push in my zealios switches into the PCB flush, it seems like the tolerances of this PCB for switch mounts are undersized. Has anyone else had this problem? Did anyone clip PCB mounts on switches?
Guys... Something is wrong with my Mira. What to do?
I just checked RGB in pcb. Only 8 of 18 are working. I set everything on green, but even on steady mode they are changing colors very fast...
I cannot push in my zealios switches into the PCB flush, it seems like the tolerances of this PCB for switch mounts are undersized. Has anyone else had this problem? Did anyone clip PCB mounts on switches?
Thats because of they way gaterons are made, the legs have a small extra piece of plastic on them that cherrys dont. Im sure the holes themselves are on spec but not gaterons.
I cannot push in my zealios switches into the PCB flush, it seems like the tolerances of this PCB for switch mounts are undersized. Has anyone else had this problem? Did anyone clip PCB mounts on switches?
Thats because of they way gaterons are made, the legs have a small extra piece of plastic on them that cherrys dont. Im sure the holes themselves are on spec but not gaterons.
well, that's good to know. maybe i will build this plate with a b.87 and save the tx pcb for brass...
I cannot push in my zealios switches into the PCB flush, it seems like the tolerances of this PCB for switch mounts are undersized. Has anyone else had this problem? Did anyone clip PCB mounts on switches?
Thats because of they way gaterons are made, the legs have a small extra piece of plastic on them that cherrys dont. Im sure the holes themselves are on spec but not gaterons.
well, that's good to know. maybe i will build this plate with a b.87 and save the tx pcb for brass...
B.87 has the USB port on the bottom of the PCB, it won't work with this case
tx87 is the only readily available option for this case, unfortunately
you can just clip the legs off your gaterons and it'll still work fine
Guys... Something is wrong with my Mira. What to do?
I just checked RGB in pcb. Only 8 of 18 are working. I set everything on green, but even on steady mode they are changing colors very fast...
Does the firmware version match the software?
Guys... Something is wrong with my Mira. What to do?
I just checked RGB in pcb. Only 8 of 18 are working. I set everything on green, but even on steady mode they are changing colors very fast...
Does the firmware version match the software?
Mine has been doing something very similar every time I unplug it and plug it back in. Just updated the firmware and it appears to be sorted now.
Guys... Something is wrong with my Mira. What to do?
I just checked RGB in pcb. Only 8 of 18 are working. I set everything on green, but even on steady mode they are changing colors very fast...
Does the firmware version match the software?
Mine has been doing something very similar every time I unplug it and plug it back in. Just updated the firmware and it appears to be sorted now.
I have downloaded and installed the latest firmware a week ago and it was working fine until now.
http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787 L3_171209.zip and JigOn_170419.zip
Reinstalling and using L3_FW_RESET didnt help :(
I'm using Zeal stabs with screws
I'm using Zeal stabs with screws
make sure the screws aren't touching any pads on the PCB
Show Image(https://farm5.staticflickr.com/4610/25753122488_ed01e5c995_h.jpg)Show Image(https://farm5.staticflickr.com/4652/25753121238_40e7daa367_h.jpg)Show Image(https://farm5.staticflickr.com/4763/25753120688_a5cad2b5a9_h.jpg)Show Image(https://farm5.staticflickr.com/4724/38728239295_46c1ac5ea4_h.jpg)
I'm using Zeal stabs with screws
make sure the screws aren't touching any pads on the PCB
I took screws off and nothing changed, but i notice something when plugin and unpluging. Sometimes 8 LEDs are working, sometimes 9 or 10. Some LEDs light up just for 0.1 sec. May it be problem with USB port?
I have also checked with different cable and different USB port in PC.
I‘ve used my MIRA for a week now, everything was working flawlessly until today. When I wanted to move the keyboard a little bit to the side, there was a burnt smell in the air. The underglow LEDs went crazy, flashed, turned on and off, while the burnt smell got worse. I unscrewed the case to check if there‘s a burnt spot on the PCB, but there was nothing unusual. Because I couldn‘t find the issue straight away, I plugged the PCB in without the case. There‘s no burnt smell anymore, but only 2 out of 10 underglow LEDs work. Work is the wrong word, as those two flicker.I plan to build mine tomorrow. That is worrisome news.
Do you have any ideas what the issue could be? I made sure that no screw touched a pad and now removed the screws completely. Still the same.
I‘ve used my MIRA for a week now, everything was working flawlessly until today. When I wanted to move the keyboard a little bit to the side, there was a burnt smell in the air. The underglow LEDs went crazy, flashed, turned on and off, while the burnt smell got worse. I unscrewed the case to check if there‘s a burnt spot on the PCB, but there was nothing unusual. Because I couldn‘t find the issue straight away, I plugged the PCB in without the case. There‘s no burnt smell anymore, but only 2 out of 10 underglow LEDs work. Work is the wrong word, as those two flicker.
Do you have any ideas what the issue could be? I made sure that no screw touched a pad and now removed the screws completely. Still the same.
That's odd, I wonder if something is wrong the the actual PCBs. Looking at my unassembled kit right now, the bottom under the PCB is a solid sheet of acrylic, and at the top there's the plate separated by the switches. In theory there's the USB port that would touch the case and maybe the plate, but I see in one reported case the plate is silver anodized aluminum. Anodized aluminum surface is non-conductive.
edit: good note about the screw-in stabilizers above, I'd make sure they are well-insulated from any pads on the PCB the screws might cover, such as by putting in small bits of electrical tape, or cut a "washer" out of electrical tape to go under the screws. That could be the culprit.
Those look good, I'll get a set. Were they a good thickness for your build? For some reason I envisioned almost paper-thin washers.
That's odd, I wonder if something is wrong the the actual PCBs. Looking at my unassembled kit right now, the bottom under the PCB is a solid sheet of acrylic, and at the top there's the plate separated by the switches. In theory there's the USB port that would touch the case and maybe the plate, but I see in one reported case the plate is silver anodized aluminum. Anodized aluminum surface is non-conductive.
edit: good note about the screw-in stabilizers above, I'd make sure they are well-insulated from any pads on the PCB the screws might cover, such as by putting in small bits of electrical tape, or cut a "washer" out of electrical tape to go under the screws. That could be the culprit.
uxcell M2 x 5mm x 1mm Nylon Flat Insulating Washers Gaskets Spacers Black 200PCS https://www.amazon.com/dp/B01N6B5KJN/ref=cm_sw_r_cp_apa_aO7xAbZ280A86
Also comes in clear
uxcell M2 x 5mm x 1mm Nylon Flat Pads Insulating Washers Gaskets Fastener White 100PCS https://www.amazon.com/dp/B01MTSK5OS/ref=cm_sw_r_cp_apa_.O7xAb5K2C33S
I use these orthodontic ligatures for screw-in stabilizers. They were about 7 USD for 1000 pieces on ebay.That‘d also a good way of preventing shorting. I‘ve used cardboard instead, hopefully MIRA won‘t die again...Show Image(https://farm5.staticflickr.com/4613/25878952468_c5d8195ab5_c.jpg)
Nope, I don‘t. But cardboard should work as well, right?
Nope, I don‘t. But cardboard should work as well, right?
If I spilled tea over my keyboard, I think the cardboard itself wouldn‘t even be the worst thing, because I‘d run into the risk of shorting not only there, but also pretty much everywhere.Nope, I don‘t. But cardboard should work as well, right?
Well as long as you don't accidentally spill tea on your keyboard, paper's probably okay. But if you do, its insulating properties will be temporarily disabled if the paper gets wet.
Here is a link to gauge interest for plates -alps, aluminum half-plates,brass, and poly-carbonate
stainless steel spacers to replace the plastic diffuser
alps PCB's
TX87 PCB's
https://goo.gl/forms/i1DOt8deZw7wdKE12 (https://goo.gl/forms/i1DOt8deZw7wdKE12)
Very classy, Puddsy. What switches did you end up putting in your MIRA? Just curious.
I'm using Zeal stabs with screws
make sure the screws aren't touching any pads on the PCB
I took screws off and nothing changed, but i notice something when plugin and unpluging. Sometimes 8 LEDs are working, sometimes 9 or 10. Some LEDs light up just for 0.1 sec. May it be problem with USB port?
I have also checked with different cable and different USB port in PC.
I'm using Zeal stabs with screws
make sure the screws aren't touching any pads on the PCB
I took screws off and nothing changed, but i notice something when plugin and unpluging. Sometimes 8 LEDs are working, sometimes 9 or 10. Some LEDs light up just for 0.1 sec. May it be problem with USB port?
I have also checked with different cable and different USB port in PC.
got together with lightingXI today and we built our MIRAs
the washers i linked before work with the screws provided for zeal stabs, no issues at all
pic cred to lightningXI, but the board is mineShow Image(http://i.imgur.com/Es8W75Z.jpg)Show Image(https://i.imgur.com/0KBlU4X.jpg)
Thank you so much to Photoelectric, Ninjadoc, and Eason. This is a dream come true for me, I'm so glad to finally have this board. It's even better than I thought it would be, and is absolutely worth the wait. If there was ever such thing as a perfect keyboard, I imagine this would be pretty close.
i gotta fix the LEDs tho lol i messed that up pretty bad
I'm using Zeal stabs with screws
make sure the screws aren't touching any pads on the PCB
I took screws off and nothing changed, but i notice something when plugin and unpluging. Sometimes 8 LEDs are working, sometimes 9 or 10. Some LEDs light up just for 0.1 sec. May it be problem with USB port?
I have also checked with different cable and different USB port in PC.I'm using Zeal stabs with screws
make sure the screws aren't touching any pads on the PCB
I took screws off and nothing changed, but i notice something when plugin and unpluging. Sometimes 8 LEDs are working, sometimes 9 or 10. Some LEDs light up just for 0.1 sec. May it be problem with USB port?
I have also checked with different cable and different USB port in PC.
I think RGB LED Parts problem.
RGB LEDs is a serial connection.
Replace the first one of the LEDs that is not lit.
RGB LEd part no. WS2812 (4 pad type)
got together with lightingXI today and we built our MIRAs
the washers i linked before work with the screws provided for zeal stabs, no issues at all
pic cred to lightningXI, but the board is mineShow Image(http://i.imgur.com/Es8W75Z.jpg)Show Image(https://i.imgur.com/0KBlU4X.jpg)
Thank you so much to Photoelectric, Ninjadoc, and Eason. This is a dream come true for me, I'm so glad to finally have this board. It's even better than I thought it would be, and is absolutely worth the wait. If there was ever such thing as a perfect keyboard, I imagine this would be pretty close.
i gotta fix the LEDs tho lol i messed that up pretty bad
YES, That's right.I'm using Zeal stabs with screws
make sure the screws aren't touching any pads on the PCB
I took screws off and nothing changed, but i notice something when plugin and unpluging. Sometimes 8 LEDs are working, sometimes 9 or 10. Some LEDs light up just for 0.1 sec. May it be problem with USB port?
I have also checked with different cable and different USB port in PC.I'm using Zeal stabs with screws
make sure the screws aren't touching any pads on the PCB
I took screws off and nothing changed, but i notice something when plugin and unpluging. Sometimes 8 LEDs are working, sometimes 9 or 10. Some LEDs light up just for 0.1 sec. May it be problem with USB port?
I have also checked with different cable and different USB port in PC.
I think RGB LED Parts problem.
RGB LEDs is a serial connection.
Replace the first one of the LEDs that is not lit.
RGB LEd part no. WS2812 (4 pad type)
Thanks!
http://allegro.pl/cyfrowa-dioda-led-ws2812-b-rgb-120-stopni-2-sztuki-i7134852166.html#thumb/1 this one will be fine?
Here's my MIRA SE:Show Image(https://i.imgur.com/0ZMYGym.jpg)Show Image(https://i.imgur.com/7fNjAtU.jpg)Show Image(https://i.imgur.com/qCn41Mj.jpg)Show Image(https://i.imgur.com/inZH7EW.jpg)Show Image(https://i.imgur.com/O2838KS.jpg)Show Image(https://i.imgur.com/1G0iaUE.jpg)Show Image(https://i.imgur.com/4Wk5zS7.jpg)
- Night Sky Blue, silver aluminum plate, integrated acrylic diffuser, brass weight insert
- Band-Aid mod + lubed Zeal Screw-in stabilizers
- Lubed Tealios, 67g.
- Weighed in at 2752 grams, built (with Cherry profile keycaps)
By far, one of the best keyboards I have built, and definitely will be one of my all-time favorites. The space-related design really makes it personally meaningful for me. I tuned my Tealio switches to reach a buttery-smooth typing experience, and I would absolutely recommend these switches, should you be able to afford the premium on ZealPC products. They're certainly not cheap switches, but very much worth it if you enjoy both their aesthetic and their typing experience.
Many thanks to Photoelectric, ninjadoc, and zzyjayfree who contributed to the design, group-buy process, and fulfillment of this design. A quick shout-out to Puddsy who is featured in this album typing on SA; I invited him to my home last night to build my and his MIRA SE. It was fun!
I hope you enjoy the pictures!
Here's my MIRA SE:Show Image(https://i.imgur.com/0ZMYGym.jpg)Show Image(https://i.imgur.com/7fNjAtU.jpg)Show Image(https://i.imgur.com/qCn41Mj.jpg)Show Image(https://i.imgur.com/inZH7EW.jpg)Show Image(https://i.imgur.com/O2838KS.jpg)Show Image(https://i.imgur.com/1G0iaUE.jpg)Show Image(https://i.imgur.com/4Wk5zS7.jpg)
- Night Sky Blue, silver aluminum plate, integrated acrylic diffuser, brass weight insert
- Band-Aid mod + lubed Zeal Screw-in stabilizers
- Lubed Tealios, 67g.
- Weighed in at 2752 grams, built (with Cherry profile keycaps)
By far, one of the best keyboards I have built, and definitely will be one of my all-time favorites. The space-related design really makes it personally meaningful for me. I tuned my Tealio switches to reach a buttery-smooth typing experience, and I would absolutely recommend these switches, should you be able to afford the premium on ZealPC products. They're certainly not cheap switches, but very much worth it if you enjoy both their aesthetic and their typing experience.
Many thanks to Photoelectric, ninjadoc, and zzyjayfree who contributed to the design, group-buy process, and fulfillment of this design. A quick shout-out to Puddsy who is featured in this album typing on SA; I invited him to my home last night to build my and his MIRA SE. It was fun!
I hope you enjoy the pictures!
I've been meaning to take nice photos of my pink MIRA, but I have flu, and doing anything at all has been a chore. So tonight I decided to try and capture the textures, not so much color accuracy (the actual color of the pink is a pale and creamy "dusty rose" kind of pink, changes hue significantly based on lighting). I'll get something more accurate in good lighting soon.Show Image(https://i.imgur.com/rgcf105.jpg)Show Image(https://i.imgur.com/mXkmzun.jpg)Show Image(https://i.imgur.com/sp0uenr.jpg)Show Image(https://i.imgur.com/hakj0e4.jpg)
Here's my MIRA SE:Show Image(https://i.imgur.com/0ZMYGym.jpg)Show Image(https://i.imgur.com/7fNjAtU.jpg)Show Image(https://i.imgur.com/qCn41Mj.jpg)Show Image(https://i.imgur.com/inZH7EW.jpg)Show Image(https://i.imgur.com/O2838KS.jpg)
Puddsy types on SA (see above)Show Image(https://i.imgur.com/1G0iaUE.jpg)Show Image(https://i.imgur.com/4Wk5zS7.jpg)
- Night Sky Blue, silver aluminum plate, integrated acrylic diffuser, brass weight insert
- Band-Aid mod + lubed Zeal Screw-in stabilizers
- Lubed Tealios, 67g.
- Weighed in at 2752 grams, built (with Cherry profile keycaps)
By far, one of the best keyboards I have built, and definitely will be one of my all-time favorites. The space-related design really makes it personally meaningful for me. I tuned my Tealio switches to reach a buttery-smooth typing experience, and I would absolutely recommend these switches, should you be able to afford the premium on ZealPC products. They're certainly not cheap switches, but very much worth it if you enjoy both their aesthetic and their typing experience.
Many thanks to Photoelectric, ninjadoc, and zzyjayfree who contributed to the design, group-buy process, and fulfillment of this design. A quick shout-out to Puddsy who is featured in this album typing on SA; I invited him to my home last night to build my and his MIRA SE. It was fun!
I hope you enjoy the pictures!
I've been meaning to take nice photos of my pink MIRA, but I have flu, and doing anything at all has been a chore. So tonight I decided to try and capture the textures, not so much color accuracy (the actual color of the pink is a pale and creamy "dusty rose" kind of pink, changes hue significantly based on lighting). I'll get something more accurate in good lighting soon.Show Image(https://i.imgur.com/rgcf105.jpg)Show Image(https://i.imgur.com/mXkmzun.jpg)Show Image(https://i.imgur.com/sp0uenr.jpg)Show Image(https://i.imgur.com/hakj0e4.jpg)
would love to see a MIRA round 2 :eek:
Here's my MIRA SE:Show Image(https://i.imgur.com/0ZMYGym.jpg)Show Image(https://i.imgur.com/7fNjAtU.jpg)Show Image(https://i.imgur.com/qCn41Mj.jpg)Show Image(https://i.imgur.com/inZH7EW.jpg)Show Image(https://i.imgur.com/O2838KS.jpg)
Puddsy types on SA (see above)Show Image(https://i.imgur.com/1G0iaUE.jpg)Show Image(https://i.imgur.com/4Wk5zS7.jpg)
- Night Sky Blue, silver aluminum plate, integrated acrylic diffuser, brass weight insert
- Band-Aid mod + lubed Zeal Screw-in stabilizers
- Lubed Tealios, 67g.
- Weighed in at 2752 grams, built (with Cherry profile keycaps)
what set are you planning on using with it?
what set are you planning on using with it?
I can't decide :( The safe fall-back option is classic beige Cherry ABS with some GMK Muted accents. I really want a set of XDA Canvas with Bauhaus legends. Switches will be smooth stock-spring MX Clears. But I might be waiting to do assembly until I can get an acrylic plate, we'll see.
Thank you guys for help. Everything is working now. I had to replace 5 SMD LEDs to fix my board.
I also added orthodontic ligatures under the stab screws (great idea Rayoui!) and electrical tape around USB.
Thank you guys for help. Everything is working now. I had to replace 5 SMD LEDs to fix my board.Great news! Glad you could figure out the problem and resolve it - even though you had to go through the replacing of SMD parts.
I also added orthodontic ligatures under the stab screws (great idea Rayoui!) and electrical tape around USB.
what set are you planning on using with it?
I can't decide :( The safe fall-back option is classic beige Cherry ABS with some GMK Muted accents. I really want a set of XDA Canvas with Bauhaus legends. Switches will be smooth stock-spring MX Clears. But I might be waiting to do assembly until I can get an acrylic plate, we'll see.
Plate matches Jane27, so not too hard to just get one cut if you want it now.
what set are you planning on using with it?
I can't decide :( The safe fall-back option is classic beige Cherry ABS with some GMK Muted accents. I really want a set of XDA Canvas with Bauhaus legends. Switches will be smooth stock-spring MX Clears. But I might be waiting to do assembly until I can get an acrylic plate, we'll see.
Plate matches Jane27, so not too hard to just get one cut if you want it now.
I think they’re different. I asked when Riot was getting Poly plates cut and was told it wasn’t going to fit. :(
I received #5 Stabs and honestly don't remember what ones I ordered originally.
Thanks to everyone for their hard work getting this thing to become a reality.
Have these all been shipped? I haven't checked in here for a looong time and still no package. I should be number 50.
Edit: Found the spreadsheet - says to be shipped to Proxy.
Have these all been shipped? I haven't checked in here for a looong time and still no package. I should be number 50.
Edit: Found the spreadsheet - says to be shipped to Proxy.
there are a few that still need to be send to eason's proxy, yeah
not sure what the holdup is though
Have these all been shipped? I haven't checked in here for a looong time and still no package. I should be number 50.
Edit: Found the spreadsheet - says to be shipped to Proxy.
there are a few that still need to be send to eason's proxy, yeah
not sure what the holdup is though
:'(
I got mine today finally. The blue is terrible but whatever... this board is incredibly built. I mean this is probably the nicest keyboard i've seen. It is really really well made.What is terrible about the blue? Just not what you are expecting?
I got mine today finally. The blue is terrible but whatever... this board is incredibly built. I mean this is probably the nicest keyboard i've seen. It is really really well made.What is terrible about the blue? Just not what you are expecting?
Sent from my PH-1 using Tapatalk
I got mine today finally. The blue is terrible but whatever... this board is incredibly built. I mean this is probably the nicest keyboard i've seen. It is really really well made.What is terrible about the blue? Just not what you are expecting?
Sent from my PH-1 using Tapatalk
It's lighter than the sample anode, I wasn't a fan of it
I got mine today finally. The blue is terrible but whatever... this board is incredibly built. I mean this is probably the nicest keyboard i've seen. It is really really well made.What is terrible about the blue? Just not what you are expecting?
Sent from my PH-1 using Tapatalk
It's lighter than the sample anode, I wasn't a fan of it
It is what it is. I'll just have to figure out if I can deal with it, if i want to have it reanodized, or if I can trade it. I was planning on selling it but then when i got it in-hand i was blown away by the quality of this build. Absolutely incredible.
For what its worth what I was signing up for originally was "Night Sky Blue (medium blue with a slight tinge of gray and purple) " (http://i.imgur.com/YBJkXhl.jpg) and what i got was this neon baby blue lol.
Yup, understood. I kept hearing it might be darker or it was just the flash etc. I know you guys did your best to keep everyone aware on all the changes over the year. I'm definitely not blaming anyone, just that it ended up being too much for my tastes. Who knows, maybe it will grow on me with some keycaps on it! :thumb:
edit: Nah its a totally different blue from the one i saw in person last summer (https://photos.google.com/share/AF1QipOkeIlktpvOjIMmTvylTvCVNsFVbz5Eo6Wn7m5FJ-bmG44gCBfRXCRWGpGrFWPuBg/photo/AF1QipNa-1Edv4Jy5-n5qXMHy_5J0F4KQ4TMXHSWAWRk?key=eTJLNHdGQmVmVXFHdVlFRF9COHNrRS1XVXc1Wkdn) at keycon
Yup, understood. I kept hearing it might be darker or it was just the flash etc. I know you guys did your best to keep everyone aware on all the changes over the year. I'm definitely not blaming anyone, just that it ended up being too much for my tastes. Who knows, maybe it will grow on me with some keycaps on it! :thumb:
edit: Nah its a totally different blue from the one i saw in person last summer (https://photos.google.com/share/AF1QipOkeIlktpvOjIMmTvylTvCVNsFVbz5Eo6Wn7m5FJ-bmG44gCBfRXCRWGpGrFWPuBg/photo/AF1QipNa-1Edv4Jy5-n5qXMHy_5J0F4KQ4TMXHSWAWRk?key=eTJLNHdGQmVmVXFHdVlFRF9COHNrRS1XVXc1Wkdn) at keycon
the one you saw last summer at KeyCon is from the Chinese (casually called "O'MIRA") group-buy. The finish was ceramic/rubber-like (skin-ripper as some said) and the corners were different.
Yup, understood. I kept hearing it might be darker or it was just the flash etc. I know you guys did your best to keep everyone aware on all the changes over the year. I'm definitely not blaming anyone, just that it ended up being too much for my tastes. Who knows, maybe it will grow on me with some keycaps on it! :thumb:
edit: Nah its a totally different blue from the one i saw in person last summer (https://photos.google.com/share/AF1QipOkeIlktpvOjIMmTvylTvCVNsFVbz5Eo6Wn7m5FJ-bmG44gCBfRXCRWGpGrFWPuBg/photo/AF1QipNa-1Edv4Jy5-n5qXMHy_5J0F4KQ4TMXHSWAWRk?key=eTJLNHdGQmVmVXFHdVlFRF9COHNrRS1XVXc1Wkdn) at keycon
I got mine today finally. The blue is terrible but whatever... this board is incredibly built. I mean this is probably the nicest keyboard i've seen. It is really really well made.What is terrible about the blue? Just not what you are expecting?
Sent from my PH-1 using Tapatalk
It's lighter than the sample anode, I wasn't a fan of it
Does not seem lighter to me at all, if anything a hair darker. I have a blue switch plate here, and I took photos of the blue prototype top earlier in the GB process, photographs were linked in the thread: https://m.imgur.com/a/Ni2h1
Yup, understood. I kept hearing it might be darker or it was just the flash etc. I know you guys did your best to keep everyone aware on all the changes over the year. I'm definitely not blaming anyone, just that it ended up being too much for my tastes. Who knows, maybe it will grow on me with some keycaps on it! :thumb:
edit: Nah its a totally different blue from the one i saw in person last summer (https://photos.google.com/share/AF1QipOkeIlktpvOjIMmTvylTvCVNsFVbz5Eo6Wn7m5FJ-bmG44gCBfRXCRWGpGrFWPuBg/photo/AF1QipNa-1Edv4Jy5-n5qXMHy_5J0F4KQ4TMXHSWAWRk?key=eTJLNHdGQmVmVXFHdVlFRF9COHNrRS1XVXc1Wkdn) at keycon
the one you saw last summer at KeyCon is from the Chinese (casually called "O'MIRA") group-buy. The finish was ceramic/rubber-like (skin-ripper as some said) and the corners were different.
pretty much this
this blue was never intended to be that dark, although it did turn out a few shades different than the sample
Yup, understood. I kept hearing it might be darker or it was just the flash etc. I know you guys did your best to keep everyone aware on all the changes over the year. I'm definitely not blaming anyone, just that it ended up being too much for my tastes. Who knows, maybe it will grow on me with some keycaps on it! :thumb:
edit: Nah its a totally different blue from the one i saw in person last summer (https://photos.google.com/share/AF1QipOkeIlktpvOjIMmTvylTvCVNsFVbz5Eo6Wn7m5FJ-bmG44gCBfRXCRWGpGrFWPuBg/photo/AF1QipNa-1Edv4Jy5-n5qXMHy_5J0F4KQ4TMXHSWAWRk?key=eTJLNHdGQmVmVXFHdVlFRF9COHNrRS1XVXc1Wkdn) at keycon
the one you saw last summer at KeyCon is from the Chinese (casually called "O'MIRA") group-buy. The finish was ceramic/rubber-like (skin-ripper as some said) and the corners were different.
pretty much this
this blue was never intended to be that dark, although it did turn out a few shades different than the sample
Any more info on that specific Mira? I would love to see if I could get a board finished in that color, maybe the upcoming LZ cls s x h
Yup, understood. I kept hearing it might be darker or it was just the flash etc. I know you guys did your best to keep everyone aware on all the changes over the year. I'm definitely not blaming anyone, just that it ended up being too much for my tastes. Who knows, maybe it will grow on me with some keycaps on it! :thumb:
edit: Nah its a totally different blue from the one i saw in person last summer (https://photos.google.com/share/AF1QipOkeIlktpvOjIMmTvylTvCVNsFVbz5Eo6Wn7m5FJ-bmG44gCBfRXCRWGpGrFWPuBg/photo/AF1QipNa-1Edv4Jy5-n5qXMHy_5J0F4KQ4TMXHSWAWRk?key=eTJLNHdGQmVmVXFHdVlFRF9COHNrRS1XVXc1Wkdn) at keycon
the one you saw last summer at KeyCon is from the Chinese (casually called "O'MIRA") group-buy. The finish was ceramic/rubber-like (skin-ripper as some said) and the corners were different.
pretty much this
this blue was never intended to be that dark, although it did turn out a few shades different than the sample
Any more info on that specific Mira? I would love to see if I could get a board finished in that color, maybe the upcoming LZ cls s x h
it's an "O Mira" from the chinese GB
there are a few (read: 2-3) that float around on english language markets but the vast majority of them are in the hands of rather tight-fisted chinese collectors
i don't blame them, the chinese ones are also really nice
but the finish on the ano is really unpleasant (there's a reason some call it "skinripper mira"), and the ****ING OFF-CENTER CORNERS ruin it for me
Yup, understood. I kept hearing it might be darker or it was just the flash etc. I know you guys did your best to keep everyone aware on all the changes over the year. I'm definitely not blaming anyone, just that it ended up being too much for my tastes. Who knows, maybe it will grow on me with some keycaps on it! :thumb:
edit: Nah its a totally different blue from the one i saw in person last summer (https://photos.google.com/share/AF1QipOkeIlktpvOjIMmTvylTvCVNsFVbz5Eo6Wn7m5FJ-bmG44gCBfRXCRWGpGrFWPuBg/photo/AF1QipNa-1Edv4Jy5-n5qXMHy_5J0F4KQ4TMXHSWAWRk?key=eTJLNHdGQmVmVXFHdVlFRF9COHNrRS1XVXc1Wkdn) at keycon
the one you saw last summer at KeyCon is from the Chinese (casually called "O'MIRA") group-buy. The finish was ceramic/rubber-like (skin-ripper as some said) and the corners were different.
pretty much this
this blue was never intended to be that dark, although it did turn out a few shades different than the sample
Any more info on that specific Mira? I would love to see if I could get a board finished in that color, maybe the upcoming LZ cls s x h
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
It's actually blue with a silver plate. The streaks are hard to see in bright light, so that's why the picture is darker.
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
It's actually blue with a silver plate. The streaks are hard to see in bright light, so that's why the picture is darker.
Seems like a pretty long delay for the remaining 9 boards... does anyone have an update on what is going on there? Maybe I missed it?
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I have the streaks as well on the logo. Mine sit below the logo. I can only see them if i angle the keyboard just right. It's really noticeable on the A of the logo.
https://imgur.com/a/Krk2I
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I have the streaks as well on the logo. Mine sit below the logo. I can only see them if i angle the keyboard just right. It's really noticeable on the A of the logo.
https://imgur.com/a/Krk2I
The following numbered Mira orders that received the wrong sized stabilizer wires have been packed late evening and will be shipped off in the afternoon.
In order to keep costs down, the wires are being shipped via untracked lettermail in a bubble mailer reinforced with cardboard inside. Lettermail to Canada should be delivered within ~4 biz days, 4-6 business days to USA. Int'l 6-10 business days.
4
8
15
16
18
22
31
44
46
54*
55
*=shipped in box due to international location.
Those that commented and wanted to add on a set of stabilizers will have to wait until our bulk order of transparent screw-in stabilizers come in around the end of January as we're completely out.
The following numbered Mira orders that received the wrong sized stabilizer wires have been packed late evening and will be shipped off in the afternoon.
In order to keep costs down, the wires are being shipped via untracked lettermail in a bubble mailer reinforced with cardboard inside. Lettermail to Canada should be delivered within ~4 biz days, 4-6 business days to USA. Int'l 6-10 business days.
4
8
15
16
18
22
31
44
46
54*
55
*=shipped in box due to international location.
Those that commented and wanted to add on a set of stabilizers will have to wait until our bulk order of transparent screw-in stabilizers come in around the end of January as we're completely out.
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
It's actually blue with a silver plate. The streaks are hard to see in bright light, so that's why the picture is darker.
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
It's actually blue with a silver plate. The streaks are hard to see in bright light, so that's why the picture is darker.
wow, weird
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
It's actually blue with a silver plate. The streaks are hard to see in bright light, so that's why the picture is darker.After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
It's actually blue with a silver plate. The streaks are hard to see in bright light, so that's why the picture is darker.
wow, weird
On a slightly lighter note, please tell me I'm not going mad/colour blind and others are seeing this as Black and Gold? I assume it's a similar phenomenon to that of 'The Dress' https://en.wikipedia.org/wiki/The_dress (https://en.wikipedia.org/wiki/The_dress)
The following numbered Mira orders that received the wrong sized stabilizer wires have been packed late evening and will be shipped off in the afternoon.
In order to keep costs down, the wires are being shipped via untracked lettermail in a bubble mailer reinforced with cardboard inside. Lettermail to Canada should be delivered within ~4 biz days, 4-6 business days to USA. Int'l 6-10 business days.
4
8
15
16
18
22
31
44
46
54*
55
*=shipped in box due to international location.
Those that commented and wanted to add on a set of stabilizers will have to wait until our bulk order of transparent screw-in stabilizers come in around the end of January as we're completely out.
Also shipped #14
clearly, its blue and white.
After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
It's actually blue with a silver plate. The streaks are hard to see in bright light, so that's why the picture is darker.After almost 3 years, I've finally received my Mira! There were times when I thought this keyboard would never be produced, but so many people stepped up to make this happen! Knowing how much hard work went into this project, it really pains me to have any complaints with it, but there is an issue with the anodizing on my Mira. It's difficult to capture on camera, but there are shadow-like streaks above the logo. I tried getting the best picture of it that I could, but it's more noticeable in person. Is this an issue that anyone else has with their Mira?Show Image(https://i.imgur.com/aCeeAXg.jpg)
I had streaks like that when I first got it, but now that it's built I can't see them. Might be the lighting in my room, though, I'll look again during the day tomorrow.
Is yours black or grey? I've heard of other minor issues like that with grey boards.
Also, what is that plate?
It's actually blue with a silver plate. The streaks are hard to see in bright light, so that's why the picture is darker.
wow, weird
On a slightly lighter note, please tell me I'm not going mad/colour blind and others are seeing this as Black and Gold? I assume it's a similar phenomenon to that of 'The Dress' https://en.wikipedia.org/wiki/The_dress (https://en.wikipedia.org/wiki/The_dress)
It's blue, I promise! :))
The streaks were most noticeable under dim incandescent light, so that's what made the colors look darker/more yellow. Here's another picture I took in better lighting with keycaps sitting on the case:Show Image(https://i.imgur.com/MPnA7SK.jpg)
Haha I assumed so, crazy how lighting can do that. Some of those caps look pretty misaligned though mate?
Haha I assumed so, crazy how lighting can do that. Some of those caps look pretty misaligned though mate?
I haven't assembled my Mira yet. I just set the keycaps on the board to see how they'd look on it.
Color change - I understand the issues about the color change.
We had issues on telling the colors from photos after EVE moved his factory and got new equipment for finishing.
Any of you that have taken pictures of the Mira realize that the colors are greatly affected by lighting.
I could never tell the true color of the blue - it seemed to change daily and I could never get a good photograph of it. I finally shipped it to Photoelectric to photograph - I tried outdoors, indoor, incandescent lighting, LED lighting - still couldn't get a good representation.
Did you ever wonder why silver and black are the only colors offered in anodized keyboards? Those colors can be reproduced - usually consistently. Grey is one of the hardest. anodizing shops I talked in the US wouldn't even attempt it. Blue is also hard to reproduce - ask LZ about his new board being offered in blue. Look at LZ's Ironman keyboard. The initial orange and the final orange are not the same. I'm sure that was due to anodizing issues and the deeper orange color could not be produced consistently.
I'm sorry if colors are not totally satisfactory - its hard to judge them from photos. Hopefully this at least gives you an idea of why it happens.
I'm sorry, guys. I will keep the best heat and keep the best MiraSE. I will always do a persistent job here (after sale). I'm very sorry to cause you trouble!!!
Show Image(http://i.imgur.com/z2ZfIBv.jpg)
Puddsy "Powdercoat keyboards 2k18"
I looked at doing this in mass quantities and cerakote too. Powdercoating seems to be best done in limited quantities and by a custom guy - one that does motorcycles and such.
The custom cerakote person known to do the best job in my area tried a keyboard 4 or 5 times. Terrible results and said he would never try one again.
Just got my MIRA; its amazingly heavy and solid, can't wait to put it together.
However, does anyone have a link to more info on the PCB? It's hard to find anything online on how I would go about setting it up correctly. Also curious if it has n-key rollover support.
Thanks, sorry if it has been posted already.
what set are you planning on using with it?
I can't decide :( The safe fall-back option is classic beige Cherry ABS with some GMK Muted accents. I really want a set of XDA Canvas with Bauhaus legends. Switches will be smooth stock-spring MX Clears. But I might be waiting to do assembly until I can get an acrylic plate, we'll see.
Plate matches Jane27, so not too hard to just get one cut if you want it now.
I think they’re different. I asked when Riot was getting Poly plates cut and was told it wasn’t going to fit. :(
QuotePlate matches Jane27, so not too hard to just get one cut if you want it now.QuoteI think they’re different. I asked when Riot was getting Poly plates cut and was told it wasn’t going to fit. :(QuoteI used a Jane polycarb plate and it fit perfect
When that question was asked I was working on the wide bodied Mira. The plate would not fit it. After discussion it was decided that we liked the design that you have better. So we discarded the support for the A87.
It does support the NERD, Leeku's alps board, and some Chinese PCB's.
The last few boards are on their way to my proxy now. Hopefully I can get them out before Chinese new year. Thank you all for your understanding and patience! :thumb:
It’s eight of them. Nothing wrong with the order, just logistics issues.The last few boards are on their way to my proxy now. Hopefully I can get them out before Chinese new year. Thank you all for your understanding and patience! :thumb:
oh man, didn't realize there were still a few left. How many?
It’s eight of them. Nothing wrong with the order, just logistics issues.The last few boards are on their way to my proxy now. Hopefully I can get them out before Chinese new year. Thank you all for your understanding and patience! :thumb:
oh man, didn't realize there were still a few left. How many?
A wild Pikachu has appeared!
This is a very stupid question, but how did you guys cut down the PCB? Mine came with a top and bottom section that doesn't look like it belongs and doesn't fit in the case. I am assuming I need to cut it down, but I figured I would check before doing so.
Thanks!
This is a very stupid question, but how did you guys cut down the PCB? Mine came with a top and bottom section that doesn't look like it belongs and doesn't fit in the case. I am assuming I need to cut it down, but I figured I would check before doing so.
Thanks!
Those two pieces just snap off. Standard affair for a leeku PCB.
Anyone have any issues with this PCB? Finally finished everything, tested it on my computer, worked, put it all together, plugged it back in and device manager says "Unknown USB Device (Device Descriptor Request Failed)". Lights under the PCB are working so it's getting power, but I guess it has some sort of driver issue.
Does anyone have the TX 87 driver?
Thanks!
Anyone have any issues with this PCB? Finally finished everything, tested it on my computer, worked, put it all together, plugged it back in and device manager says "Unknown USB Device (Device Descriptor Request Failed)". Lights under the PCB are working so it's getting power, but I guess it has some sort of driver issue.
Does anyone have the TX 87 driver?
Thanks!
Have you tried plugging it in while pressung 'u'? Had something similar with a TX-75 PCB and that worked
You are the BEST! Thank you so much! I have absolutely no idea why that worked, but it did!
Thanks!
just got my replacement stab too! time to build!
edit: dangit can't continue the build without finding a wrench for the hex screws on the back.. 2.5mm right?
I just received my shipment. Nice hefty case! However, I received no PCBs... were these supposed to be shipped separately? I even ordered a spare too...
8 of the remaining orders are getting PCBs shipped separately. Please contact zzyjayfree for details to see if yours is one of those.
I would also like to thank zzyjayfree(Eason) for dealing withthe logistics and shipping from an oversees manufacturer, EVE for his quick response to fix defects, Zeal for both providing the gold stabs and replacing mixed up space bar wires,and Photoelectric for all she has done - which is far too much to list. Thank you all for your help in making this GB a success.
Sorry this is a newbie-ish question, but does anyone have a build log or a step by step so I make sure I build it correctly? This is actually my first custom built by myself. Mainly i'm not sure about the plate/pcb: do you solder the switches into the pcb while the plate is on top? Or can the pcb be loose away from the plate and be switched out easily?
I tried finding similar boards build logs but couldn't find any.
Sorry this is a newbie-ish question, but does anyone have a build log or a step by step so I make sure I build it correctly? This is actually my first custom built by myself. Mainly i'm not sure about the plate/pcb: do you solder the switches into the pcb while the plate is on top? Or can the pcb be loose away from the plate and be switched out easily?
I tried finding similar boards build logs but couldn't find any.
I hope this helps:
Sorry this is a newbie-ish question, but does anyone have a build log or a step by step so I make sure I build it correctly? This is actually my first custom built by myself. Mainly i'm not sure about the plate/pcb: do you solder the switches into the pcb while the plate is on top? Or can the pcb be loose away from the plate and be switched out easily?
I tried finding similar boards build logs but couldn't find any.
I hope this helps:
Guess I suck at googling, I couldn't find anything like this lol. Thank you.
Just wondering if this is normal, I have two small splotches of purple on my blue mira. Its a bit easier to see in person so sorry if my photos don't show anything. I'm assuming its part of the anodizing process but haven't seen anything like it before. It almost looks like someone had dye on their finger and touched the board in those two spots.Show Image(https://i.imgur.com/ZFDqGS8.jpg)Show Image(https://i.imgur.com/qNkPmM1.jpg)
Just wondering if this is normal, I have two small splotches of purple on my blue mira. Its a bit easier to see in person so sorry if my photos don't show anything. I'm assuming its part of the anodizing process but haven't seen anything like it before. It almost looks like someone had dye on their finger and touched the board in those two spots.Show Image(https://i.imgur.com/ZFDqGS8.jpg)Show Image(https://i.imgur.com/qNkPmM1.jpg)
zeal mentioned he had some purple spots, ask him what to do
Sorry, can't see any uneven color in those areas at all, but I'll take your word for it. Have you tried cleaning those areas to be sure it's not some kind of dirt or dye? Could be you could get a better capture in the daylight.
P.S.: anyone reporting defects: we're collecting this information and will speak with the manufacturer regarding resolution and replacements once all the boards are received.
Sorry, can't see any uneven color in those areas at all, but I'll take your word for it. Have you tried cleaning those areas to be sure it's not some kind of dirt or dye? Could be you could get a better capture in the daylight.
P.S.: anyone reporting defects: we're collecting this information and will speak with the manufacturer regarding resolution and replacements once all the boards are received.
Sorry, can't see any uneven color in those areas at all, but I'll take your word for it. Have you tried cleaning those areas to be sure it's not some kind of dirt or dye? Could be you could get a better capture in the daylight.
P.S.: anyone reporting defects: we're collecting this information and will speak with the manufacturer regarding resolution and replacements once all the boards are received.
Here are probably the best photos I can get.Show Image(https://i.imgur.com/3L6oavW.jpg)Show Image(https://i.imgur.com/obdUsU0.jpg)Show Image(https://i.imgur.com/zC6AOUI.jpg)
Sorry, can't see any uneven color in those areas at all, but I'll take your word for it. Have you tried cleaning those areas to be sure it's not some kind of dirt or dye? Could be you could get a better capture in the daylight.
P.S.: anyone reporting defects: we're collecting this information and will speak with the manufacturer regarding resolution and replacements once all the boards are received.
Here are probably the best photos I can get.Show Image(https://i.imgur.com/3L6oavW.jpg)Show Image(https://i.imgur.com/obdUsU0.jpg)Show Image(https://i.imgur.com/zC6AOUI.jpg)
I think I can see what you mean on the first photograph, difficult to tell on the other two, but I believe you. I've noted the defects in a list we're using to keep track of defects and inconsistencies reported to us.
Stainless steel spacer would be great! What are the chances of a brass one though :D
Stainless steel spacer would be great! What are the chances of a brass one though :D
you wouldn't want brass for that in the shape mira already has
would patina and start smelling like metal pretty quickly
First I want to thank everyone for participating in the Mira GB. Without everyonee in the Geekhack community this would have never occured. EVE produced a great board and is working hard to fix the manufacturing defects and to make sure all are satisfied with their Mira. If someone would start a picture thread that would be great.
Extra PCB’s - 50 have been shipped to me so extras will be available.
Alp’s PCB’s - I can get 25 or 50. They have been offered to me with or without resistors soldered. I’m lazy I had rather have them soldered. Please comment, I’ve not soldered resistors on an alps PCB -ever. I also haven’t bought one in forever so please PM me with what you’ve had to pay for them including shipping- my cost struck me as the retail cost but I have no clue.
Plates - I have the CAD files at home and will get the estimates next week. My understanding from the poll is the most desired are brass, acrylic, and partial plates.
Alps plates - most common seem to be Dell or Apple style. I think one style is probably easiest o make and Apple seems to be easier to source these days. Feel free to comment.
Plates will fit both Mira and and YukTsi’s boards. Intially I was asked when a GB for acrylic plates was done and I said no. That was because at that point I was looking at a [version] of the Mira that was wider to fit the A87. That version was not produced and the thinner version was. Sorry about the confusion.
Spacer - I’m making it with a cut-out in the center to prevent the weight from being scratched and to reduce the weight of it. A solid sheet of stainless steel is heavy. I know people have mentioned aluminum and brass but a certain nmber need to be made to reduce cost. Also can someone with a micrometer measure the thickness of the thin rim and send it to me?
Mira Pad - the intial design had no weight but that has been revised. I have the CAD files but I can’t view them till I get home friday. I will get an estimate, a CAD and cost for a stainless steel spacer, final cost for the PCB, and try to run it as soon as possible. This time I will try to have all bugs out of the process so it can be done quickly. Until I see the design I can’t comment on engraving or numbering.
(https://farm5.staticflickr.com/4666/38425415370_c5f92329dd_b.jpg) (https://flic.kr/p/21xwigy)
Some issues I had.MoreShow Image(https://i.imgur.com/TP5wwbs.jpg)
My weight has some lines on it, It's inside the board so it's not really that important but I'd love to get it shiny. How would I go about polishing this?
MoreShow Image(https://i.imgur.com/ctONu4x.png)
All my screw holes on the top case part have a bit of rust on them. Is this something I should be concerned about?
MoreShow Image(https://i.imgur.com/orlee0i.png)
Last thing is one of my screws wasn't threaded :confused: I had an extra screw so it's not a problem, but never saw this problem before ha.
QuoteSpacer - I’m making it with a cut-out in the center to prevent the weight from being scratched and to reduce the weight of it. A solid sheet of stainless steel is heavy. I know people have mentioned aluminum and brass but a certain nmber need to be made to reduce cost. Also can someone with a micrometer measure the thickness of the thin rim and send it to me?
i think i can borrow a caliper in the next week
Just got my Mira today. The blue is really great. I regret not getting a Winkeyless top though.
Sadly mine too was plagued with those weird dark lines around the logo.
And the screw holes look rusted, any confirmation that it won’t be an issue? :(
Do I contact Ninja or Pho about the dark marks?
Edit: Just noticed my Acrylic is missing a piece in the front too, or wasn’t cut correctly. :(
Can’t wait to get my 2x PCB’s from Ninja to eventually build this puppy up. Really happy I went with blue.
I got the Mira S.E. (Sifo's Edition) :p
Keyset is Imsto blue blanks, and thanks for the ease of mind, was a bit worried about the rust.
I got the Mira S.E. (Sifo's Edition) :p
Keyset is Imsto blue blanks, and thanks for the ease of mind, was a bit worried about the rust.
(https://farm5.staticflickr.com/4746/39565721534_1c60c9c472_o.jpg) (https://flic.kr/p/23hhEyE)Mira SE (https://flic.kr/p/23hhEyE) by iArson (https://www.flickr.com/photos/150800553@N04/), on FlickrNice!
(https://farm5.staticflickr.com/4746/39565721534_1c60c9c472_o.jpg) (https://flic.kr/p/23hhEyE)Mira SE (https://flic.kr/p/23hhEyE) by iArson (https://www.flickr.com/photos/150800553@N04/), on FlickrNice!
@Ninjadoc: I was at a mechanical keyboard meetup today and while it was good fun, I‘ve returned with a little dent on it, which buggs me a little bit. Those things can happen at a meetup, but it’s still a bit unfortunate. It‘s on the backside and thus not visible during regular usage, but I know it‘s there...
Do you carry bottom replacements? If you do, please let me know.
Kinda crossing my fingers here but there wouldn't happen to be any spare kits leftover from the gb?
I‘m fine with that. Do you need pictures of the dent? I could provide that in the evening, given that I manage to get out of Uni at a reasonable time.(https://farm5.staticflickr.com/4746/39565721534_1c60c9c472_o.jpg) (https://flic.kr/p/23hhEyE)Mira SE (https://flic.kr/p/23hhEyE) by iArson (https://www.flickr.com/photos/150800553@N04/), on FlickrNice!
@Ninjadoc: I was at a mechanical keyboard meetup today and while it was good fun, I‘ve returned with a little dent on it, which buggs me a little bit. Those things can happen at a meetup, but it’s still a bit unfortunate. It‘s on the backside and thus not visible during regular usage, but I know it‘s there...
Do you carry bottom replacements? If you do, please let me know.
Let me add this to the list of defective parts that need to be replaced. It will most likely be a replacement for a fee in this case (to be determined what that would be).
I‘m fine with that. Do you need pictures of the dent? I could provide that in the evening, given that I manage to get out of Uni at a reasonable time.(https://farm5.staticflickr.com/4746/39565721534_1c60c9c472_o.jpg) (https://flic.kr/p/23hhEyE)Mira SE (https://flic.kr/p/23hhEyE) by iArson (https://www.flickr.com/photos/150800553@N04/), on FlickrNice!
@Ninjadoc: I was at a mechanical keyboard meetup today and while it was good fun, I‘ve returned with a little dent on it, which buggs me a little bit. Those things can happen at a meetup, but it’s still a bit unfortunate. It‘s on the backside and thus not visible during regular usage, but I know it‘s there...
Do you carry bottom replacements? If you do, please let me know.
Let me add this to the list of defective parts that need to be replaced. It will most likely be a replacement for a fee in this case (to be determined what that would be).
Do you by any chance know how good the ano matches the original bottom part?
Since the dent was not caused before you got the part, it's not really relevant where it is or what size it is, if you're asking for a replacement. It's up to you if you'll want to pay for a replacement top and its shipping cost. I don't have an answer about what that would be yet. I have no idea about your last question as we don't share the same color. Typically there can be some slight variation in top and bottom colors among many kits (like TX84/87, red TGR Jane, etc.), it just varies on how *noticeable* this difference is. It helps to have kits with acrylic spacers so if there is any slight difference in anodizing, the two differing parts won't be right against each other.Without a price, I cannot say if I really want one or not. So if you could please give me an exact quote once you can figure that out, I‘ll consider it. I‘m not in a rush, so take your time.
No clue, really. I didn’t guard my MIRA the whole event, so it could‘ve happened at any point. I just noticed it when we all packed our stuff and it was pretty disappointing to see, to be honest. There‘s always a small risk, but because my board is affected, this‘ll make me think twice before attending another meetup. Don‘t get me wrong, the meetup itself was super cool and I really enjoyed the Sunday afternoon, but the dent is one thing, that I wouldn‘t miss... :DI‘m fine with that. Do you need pictures of the dent? I could provide that in the evening, given that I manage to get out of Uni at a reasonable time.(https://farm5.staticflickr.com/4746/39565721534_1c60c9c472_o.jpg) (https://flic.kr/p/23hhEyE)Mira SE (https://flic.kr/p/23hhEyE) by iArson (https://www.flickr.com/photos/150800553@N04/), on FlickrNice!
@Ninjadoc: I was at a mechanical keyboard meetup today and while it was good fun, I‘ve returned with a little dent on it, which buggs me a little bit. Those things can happen at a meetup, but it’s still a bit unfortunate. It‘s on the backside and thus not visible during regular usage, but I know it‘s there...
Do you carry bottom replacements? If you do, please let me know.
Let me add this to the list of defective parts that need to be replaced. It will most likely be a replacement for a fee in this case (to be determined what that would be).
Do you by any chance know how good the ano matches the original bottom part?
Sorry to hear this. How did the damage happen?
I'd definitely be interested in another round, hope you'll consider it despite the obstacles of the first one :thumb:Certainly would also be interested in a Round 2 for the Mira actually.
Currently I'm not planning on a round 2 in the foreseeable future. I do plan on a numpad. After that we will see.
Currently I'm not planning on a round 2 in the foreseeable future. I do plan on a numpad. After that we will see.
:'( :'(
I remember you mentioning a 75% in the works, will that happen after the numpad?
Currently I'm not planning on a round 2 in the foreseeable future. I do plan on a numpad. After that we will see.
:'( :'(
I remember you mentioning a 75% in the works, will that happen after the numpad?
i don't remember seeing that at all
Got my missing PCB in the mail today so that completes my order :DPCB mount or screw in.
Thanks again for all the great work by everyone involved.
Do I need Plate Mount, PCB Mount or Screw In stabs?
Got my missing PCB in the mail today so that completes my order :DPCB mount or screw in.
Thanks again for all the great work by everyone involved.
Do I need Plate Mount, PCB Mount or Screw In stabs?
Sent from my mobile using Tapatalk
Oh missing parts are starting to ship?
Oh missing parts are starting to ship?
some orders had PCBs ship later due to some technicalities
iirc you got a PCB with yours, but i've been wrong before
Oh missing parts are starting to ship?
some orders had PCBs ship later due to some technicalities
iirc you got a PCB with yours, but i've been wrong before
I'm just waiting on my brass weight and my stabs.
i cant decide what kind of switches to put in mine. i have alot of vintage blacks and springs at home, but what i love is hiroses, and also have an urge to try silent silvers. HALPHiroses, leggo meme board
i cant decide what kind of switches to put in mine. i have alot of vintage blacks and springs at home, but what i love is hiroses, and also have an urge to try silent silvers. HALP
i cant decide what kind of switches to put in mine. i have alot of vintage blacks and springs at home, but what i love is hiroses, and also have an urge to try silent silvers. HALP
Clearly the correct answer is MX Clears (stock spring).
i cant decide what kind of switches to put in mine. i have alot of vintage blacks and springs at home, but what i love is hiroses, and also have an urge to try silent silvers. HALP
Clearly the correct answer is MX Clears (stock spring).
mx black spring
i cant decide what kind of switches to put in mine. i have alot of vintage blacks and springs at home, but what i love is hiroses, and also have an urge to try silent silvers. HALP
Clearly the correct answer is MX Clears (stock spring).
mx black spring
That would be a downgrade, as the MX Clear spring is special in its characteristics, giving that extra cushioned feeling if bottoming out. It's a big part of why I love stock MX Clears. (MX Blacks and their spring are nice too, but just not the same).
What scratchiness? If you mean that some stems and housings are scratchy, it's unfortunately true. That's why hunting for smoother switches and also lubricating helps a lot. I usually stick with old stock Cherry switches for MX Black, Brown, and Clears (but prefer newer MX Blues, as vintage MX Blues just sound broken to me). Does not need to be "vintage" with large logo--some older batches are just very smooth either through some use or combination with better manufacturing tolerances for those batches.
i cant decide what kind of switches to put in mine. i have alot of vintage blacks and springs at home, but what i love is hiroses, and also have an urge to try silent silvers. HALP
Clearly the correct answer is MX Clears (stock spring).
mx black spring
That would be a downgrade, as the MX Clear spring is special in its characteristics, giving that extra cushioned feeling if bottoming out. It's a big part of why I love stock MX Clears. (MX Blacks and their spring are nice too, but just not the same).
B-b-but what about the scratchiness?
What scratchiness? If you mean that some stems and housings are scratchy, it's unfortunately true. That's why hunting for smoother switches and also lubricating helps a lot. I usually stick with old stock Cherry switches for MX Black, Brown, and Clears (but prefer newer MX Blues, as vintage MX Blues just sound broken to me). Does not need to be "vintage" with large logo--some older batches are just very smooth either through some use or combination with better manufacturing tolerances for those batches.
Nah I was just being a bit flippant. Personally I don't really rate most cherry switches. Having said that the new tooling made silent blacks one of my favourite switches and I would imagine that will carry over to most of the others produced from recently onwards. I'll still think browns are awful though regardless =P
I personally think stock MX Browns have their charm, though for some odd reason I find them by far the best with thin ABS OEM profile keycaps, especially those with that "soft touch" rubberized coating. Recently I got a sampler of Kailh switches from NovelKeys, and I think everyone who hates Cherry MX Browns should give Kailh Browns (regular and BOX Browns) a serious consideration. The bump is strong and quick, which is the complaint about Cherry Browns. But I actually like the "long bump" of Cherry MX Clears and Cherry MX Browns -- it's just different and to me has nice tactility, combined with long travel distance. I feel like I'm getting a relaxing finger massage typing on MX Browns with OEM profile keycaps, trying to not bottom out. (I don't have any of those anymore, but I used to have a couple of keyboards like that, and sometimes I still try them on store displays).
Ah that's interesting, I'm ok with the weight, it just doesn't feel like there is enough of a bump for me. Like a switch that is in between a tactile and a linear or something. I've been trying to decide what switches to use for my M65 and that gives me some food for thought. I've only heard great things about the new kailh box/non box switches but there are so many and a lot of them are clicky which I'm not sure I'm after. Maybe I should have a look at the browns or burnt orange? (I think there was something a bit off with the first burnt orange batch but it has been fixed now right?) Also, I assume they can be opened and lubed the same as a regular mx/clone, just a different mechanism for opening and closing? Are the particularly pingy at all or loud on the upstroke? Even if they are I find lube usually minimises this from my experience.
I personally think stock MX Browns have their charm, though for some odd reason I find them by far the best with thin ABS OEM profile keycaps, especially those with that "soft touch" rubberized coating. Recently I got a sampler of Kailh switches from NovelKeys, and I think everyone who hates Cherry MX Browns should give Kailh Browns (regular and BOX Browns) a serious consideration. The bump is strong and quick, which is the complaint about Cherry Browns. But I actually like the "long bump" of Cherry MX Clears and Cherry MX Browns -- it's just different and to me has nice tactility, combined with long travel distance. I feel like I'm getting a relaxing finger massage typing on MX Browns with OEM profile keycaps, trying to not bottom out. (I don't have any of those anymore, but I used to have a couple of keyboards like that, and sometimes I still try them on store displays).
who are you and what have you done with photoelectric
Ah that's interesting, I'm ok with the weight, it just doesn't feel like there is enough of a bump for me. Like a switch that is in between a tactile and a linear or something. I've been trying to decide what switches to use for my M65 and that gives me some food for thought. I've only heard great things about the new kailh box/non box switches but there are so many and a lot of them are clicky which I'm not sure I'm after. Maybe I should have a look at the browns or burnt orange? (I think there was something a bit off with the first burnt orange batch but it has been fixed now right?) Also, I assume they can be opened and lubed the same as a regular mx/clone, just a different mechanism for opening and closing? Are the particularly pingy at all or loud on the upstroke? Even if they are I find lube usually minimises this from my experience.
I use 62g ergo clears for most of my builds. They usually feel a little grainy for the first couple weeks but wear in fairly quickly. I can even feel the difference between the alphas and lesser used switches (like F12) after a couple of weeks.
Potentially stupid question - just built my Mira, first time I've had a board with a Leeku PCB and I've having trouble programming it. I can flash the basic firmware (version L3_171209) just fine it seems, but JigOn gives me a "connection fail" error every time I try to connect to set up my keymap. If I understand correctly, there's no bootloader mode right? What am I missing?
Are you using a USB 2 port? I recall issues with a USB 3 port.
Tried using several different USB cables and ports as some folks have said to do; same outcome every time.
Potentially stupid question - just built my Mira, first time I've had a board with a Leeku PCB and I've having trouble programming it. I can flash the basic firmware (version L3_171209) just fine it seems, but JigOn gives me a "connection fail" error every time I try to connect to set up my keymap. If I understand correctly, there's no bootloader mode right? What am I missing?
Are you using a USB 2 port? I recall issues with a USB 3 port.
Potentially stupid question - just built my Mira, first time I've had a board with a Leeku PCB and I've having trouble programming it. I can flash the basic firmware (version L3_171209) just fine it seems, but JigOn gives me a "connection fail" error every time I try to connect to set up my keymap. If I understand correctly, there's no bootloader mode right? What am I missing?
Are you using a USB 2 port? I recall issues with a USB 3 port.
Tried both USB 2 and USB 3 ports - same thing :(
Turns out when I try to upload my keymap into the board from JigOn, even after "connection fail," it gives me "update fail" but the keymap actually takes. But if I unplug the board and plug it back in, it's back to default. So clearly it's communicating with the board somehow, but not fully.
I personally think stock MX Browns have their charm, though for some odd reason I find them by far the best with thin ABS OEM profile keycaps, especially those with that "soft touch" rubberized coating. Recently I got a sampler of Kailh switches from NovelKeys, and I think everyone who hates Cherry MX Browns should give Kailh Browns (regular and BOX Browns) a serious consideration. The bump is strong and quick, which is the complaint about Cherry Browns. But I actually like the "long bump" of Cherry MX Clears and Cherry MX Browns -- it's just different and to me has nice tactility, combined with long travel distance. I feel like I'm getting a relaxing finger massage typing on MX Browns with OEM profile keycaps, trying to not bottom out. (I don't have any of those anymore, but I used to have a couple of keyboards like that, and sometimes I still try them on store displays).
who are you and what have you done with photoelectric
I’m confused... This has been my opinion about Cherry switches for years. Nothing new.Ah that's interesting, I'm ok with the weight, it just doesn't feel like there is enough of a bump for me. Like a switch that is in between a tactile and a linear or something. I've been trying to decide what switches to use for my M65 and that gives me some food for thought. I've only heard great things about the new kailh box/non box switches but there are so many and a lot of them are clicky which I'm not sure I'm after. Maybe I should have a look at the browns or burnt orange? (I think there was something a bit off with the first burnt orange batch but it has been fixed now right?) Also, I assume they can be opened and lubed the same as a regular mx/clone, just a different mechanism for opening and closing? Are the particularly pingy at all or loud on the upstroke? Even if they are I find lube usually minimises this from my experience.
I agree that there are far too many MX-compatible switches now to make an informed decision. For Kailh, I recommend a switch tester pack like the one from novelkeys. There are still a bunch of other brands beyond those as well, for which you can also get samples. I decided I’m fine not knowing how every switch compares to every other switch as long as every one of my boards is different enough from others and is enjoyable to type on (and I only keep a handful of keyboards).
Potentially stupid question - just built my Mira, first time I've had a board with a Leeku PCB and I've having trouble programming it. I can flash the basic firmware (version L3_171209) just fine it seems, but JigOn gives me a "connection fail" error every time I try to connect to set up my keymap. If I understand correctly, there's no bootloader mode right? What am I missing?
Are you using a USB 2 port? I recall issues with a USB 3 port.
Tried both USB 2 and USB 3 ports - same thing :(
Turns out when I try to upload my keymap into the board from JigOn, even after "connection fail," it gives me "update fail" but the keymap actually takes. But if I unplug the board and plug it back in, it's back to default. So clearly it's communicating with the board somehow, but not fully.
did you run the batch file or are you just using the keymapper?
run the loadfw batch file and try again
Potentially stupid question - just built my Mira, first time I've had a board with a Leeku PCB and I've having trouble programming it. I can flash the basic firmware (version L3_171209) just fine it seems, but JigOn gives me a "connection fail" error every time I try to connect to set up my keymap. If I understand correctly, there's no bootloader mode right? What am I missing?
Are you using a USB 2 port? I recall issues with a USB 3 port.
Tried both USB 2 and USB 3 ports - same thing :(
Turns out when I try to upload my keymap into the board from JigOn, even after "connection fail," it gives me "update fail" but the keymap actually takes. But if I unplug the board and plug it back in, it's back to default. So clearly it's communicating with the board somehow, but not fully.
did you run the batch file or are you just using the keymapper?
run the loadfw batch file and try again
Yeah, I run loadfw every time I connect the board before running JigOn - still get the connection fail message. And I've tried using both L3_171209.zip (latest version) and L3_170419.zip (version # matches with JigOn). Same thing each time :(
After unzipping and running the loadfw flash file (version L3_171209.zip) I deleted the JigOn folder and re-extracted just the JigOn zip (version JigOn_170419.zip). I was able to connect and flash fine after that. I should mention keymapping flash would always work (even though update failed would always pop up). I did have issues controlling LEDs however when I was in the state of being unable to connect to the PCB.
such a good looking board. hope there's a R2 w no/optional diffuser and spots for bumpons one day. one can dream.
Currently I'm not planning on a round 2 in the foreseeable future. I do plan on a numpad. After that we will see.
Currently I'm not planning on a round 2 in the foreseeable future. I do plan on a numpad. After that we will see.
Hi Photo,
My board is also affected by the anodization defect around the Mira logo as well. Is anything being done to address this issue?
I haven't watched the thread as close lately.
I got the Mira S.E. (Sifo's Edition) :p
Keyset is Imsto blue blanks, and thanks for the ease of mind, was a bit worried about the rust.
Sifo's LZ is exactly what I thought of when I saw your pictures. Good "Sifo's Edition" :)) :)) :))
Can I control the LEDs from the keyboard? Or do I need JigOn?
I'll be contacting buyers regarding parts with issues, starting tomorrow. I'm kinda busy recently so I can only get to a few of you guys each day.. Please be patient. Thank you for your understanding.
I'll be contacting buyers regarding parts with issues, starting tomorrow. I'm kinda busy recently so I can only get to a few of you guys each day.. Please be patient. Thank you for your understanding.
Hi zzjayfree,
Don't want to rush you or anything, but I would just like to confirm that I am on the list to be contacted. I don't check this thread very often so I tend to miss a lot of things.
Thanks!
Any one else having problems with their pcb? After a while mine starts acting crazy, for example my x button stopped working. after i took apart the keyboard to check what could be wrong, everything started working again. i then put it back together, after a while my space button starts spamming. i then unplug/plug it, still the same, so. Maybe i should get some foam or something?
Any input greatly appriciated.
Any one else having problems with their pcb? After a while mine starts acting crazy, for example my x button stopped working. after i took apart the keyboard to check what could be wrong, everything started working again. i then put it back together, after a while my space button starts spamming. i then unplug/plug it, still the same, so. Maybe i should get some foam or something?
Any input greatly appriciated.
if you're using screw-in stabilizers i'd check to make sure the screw itself is not touching any pads it shouldn't. i've run into issues with this kind of thing in the past and putting some electrical tape (or even the sticky part of a flexible bandaid) in between the screw and the pcb fixed it right up.
nylon washers from amazon do a pretty good job as well
https://www.amazon.com/uxcell-Insulating-Washers-Gaskets-Spacers/dp/B01N6B5KJN/ref=sr_1_3?ie=UTF8&qid=1521227117&sr=8-3&keywords=m2+nylon+washer
these are what i used
nylon washers from amazon do a pretty good job as well
https://www.amazon.com/uxcell-Insulating-Washers-Gaskets-Spacers/dp/B01N6B5KJN/ref=sr_1_3?ie=UTF8&qid=1521227117&sr=8-3&keywords=m2+nylon+washer
these are what i used
1mm thick? dem
There's some major blotching and dark spots that I couldn't get rid of with isopropyl alcohol. Anybody have this issue? Tips on how to fix it?
I'm not sure if this has been asked already... but where can I find some sip sockets that don't cost an arm and a leg? Ideally in EU?
Any word on the extras? Particularly interested in a brass plate and the stainless steel spacer...
Any word on the extras? Particularly interested in a brass plate and the stainless steel spacer...
I think they're still trying to finalize replacement parts first
Any word on the extras? Particularly interested in a brass plate and the stainless steel spacer...
I think they're still trying to finalize replacement parts first
Yep. I'm still waiting on a new weight.
Any word on the extras? Particularly interested in a brass plate and the stainless steel spacer...
I think they're still trying to finalize replacement parts first
Yep. I'm still waiting on a new weight.
Did anyone receive an email regarding replacements and etc?
I did not, I was just wondering.
Any word on the extras? Particularly interested in a brass plate and the stainless steel spacer...
I think they're still trying to finalize replacement parts first
Yep. I'm still waiting on a new weight.
Did anyone receive an email regarding replacements and etc?
I did not, I was just wondering.
Like the rest of you I'm waiting on zzyjayfree and EVE to finish the QA problems. I will try to get my stuff together and start the plates. I'm sorry about the way this is ending but it is out of my hands.Zzyjayfree is a busy man. He's also handling Moon shipments, so my guess is that he needs to fulfill those asap as well.
Anyone with the blue Mira wanna share their builds? Very curious as to what keycap set everyone used. Trying to get some inspiration and motivation. ;D
Anyone with the blue Mira wanna share their builds? Very curious as to what keycap set everyone used. Trying to get some inspiration and motivation. ;D
Anyone with the blue Mira wanna share their builds? Very curious as to what keycap set everyone used. Trying to get some inspiration and motivation. ;D
I don't have a MIRA SE, but I do have a blue MIRA. I ended up using BSP blue Cyrillic on mine and love it.Show Image(https://i.imgur.com/2wbtIw0.jpg)
Anyone with the blue Mira wanna share their builds? Very curious as to what keycap set everyone used. Trying to get some inspiration and motivation. ;D
I don't have a MIRA SE, but I do have a blue MIRA. I ended up using BSP blue Cyrillic on mine and love it.Show Image(https://i.imgur.com/2wbtIw0.jpg)
Anyone with the blue Mira wanna share their builds? Very curious as to what keycap set everyone used. Trying to get some inspiration and motivation. ;D
I don't have a MIRA SE, but I do have a blue MIRA. I ended up using BSP blue Cyrillic on mine and love it.Show Image(https://i.imgur.com/2wbtIw0.jpg)
What are the latest news on Alps plates, the numpad and possible replacement parts? I‘ve been contacted about the replacement parts, where Eason said that they‘re checking with EVE or something in that direction.
At this point, I‘d really like to see, if there‘s somethig coming or not.
That's cool, I hope you've talked to ninjadoc, as he's also been trying to sort out a GB for accessories including alternative plates made of different materials. I'm personally interested in a plastic plate (polycarb or acrylic). Is your carbon fiber going to come in one standard color?
That's cool, I hope you've talked to ninjadoc, as he's also been trying to sort out a GB for accessories including alternative plates made of different materials. I'm personally interested in a plastic plate (polycarb or acrylic). Is your carbon fiber going to come in one standard color?
black, but there are also 2 color weaves i might consider using
it's gonna be 3000 layout btw, so 6.25x space with offset capslock
That's cool, I hope you've talked to ninjadoc, as he's also been trying to sort out a GB for accessories including alternative plates made of different materials. I'm personally interested in a plastic plate (polycarb or acrylic). Is your carbon fiber going to come in one standard color?
black, but there are also 2 color weaves i might consider using
it's gonna be 3000 layout btw, so 6.25x space with offset capslock
Oh, boo! I'm married to the 7x spacebar :) (that came out kinda dirty...)
Damn, a carbon fiber plate with the right design should sound otherworldly.
Wanna design one for the Keycult next? :P
It's all done :thumb:Show Image(https://i.imgur.com/rZ3RNid.jpg)
It's all done :thumb:Show Image(https://i.imgur.com/rZ3RNid.jpg)
Great matching! What are its specs including the keyset, switches, etc?
It's all done :thumb:Show Image(https://i.imgur.com/rZ3RNid.jpg)
Great matching! What are its specs including the keyset, switches, etc?
Thanks! It has 67g vintage black switches, Olivetti alphas, Electric Bluegaloo mods, and cyan keys from a Dolch add-on kit from Zeal.
It's all done :thumb:Show Image(https://i.imgur.com/rZ3RNid.jpg)
i need a ninja update about the mira numpad, pls
Have a dumb question.. It seems like my pcb has an extra top and bottom piece. It looks like it has perforated edges and should be removed. Did people just bend this off or cut it off with something else?
Have a dumb question.. It seems like my pcb has an extra top and bottom piece. It looks like it has perforated edges and should be removed. Did people just bend this off or cut it off with something else?
Have a dumb question.. It seems like my pcb has an extra top and bottom piece. It looks like it has perforated edges and should be removed. Did people just bend this off or cut it off with something else?
You can just snap them off
Have a dumb question.. It seems like my pcb has an extra top and bottom piece. It looks like it has perforated edges and should be removed. Did people just bend this off or cut it off with something else?
I just used my hands to snap them off.
i need a ninja update about the mira numpad, pls
I have the CAD done. Deciding on a machine shop for a prototype.
Have any of you fully backlit your Mira? Leeku's plate has individual key LED slots. I'd be interested to see a picture.
Have any of you fully backlit your Mira? Leeku's plate has individual key LED slots. I'd be interested to see a picture.
Hi guys, I emailed zzjayfree almost 2 weeks ago about replacement parts but have not received a response. Is there any update on this front? Has the drama been resolved?
Working on it currently..Woohoo! Hoping we can get our parts soon. Also waiting for a Moon part as well, so two birds one stone.
A wild Pikachu has appeared!
Question for the pros... using regular cherry pcb mounted stabs (pretty sure they're cherry originals) with golden wires for the 6.25u spacebar. The thing feels mushy... this is the second keyboard that I make that has a mushy feeling spacebar :( What am I doing wrong?
Using box royals (purple). Also tried a clicky switch from Kailh that seems to have a very strong spring... same thing.
Question for the pros... using regular cherry pcb mounted stabs (pretty sure they're cherry originals) with golden wires for the 6.25u spacebar. The thing feels mushy... this is the second keyboard that I make that has a mushy feeling spacebar :( What am I doing wrong?
Using box royals (purple). Also tried a clicky switch from Kailh that seems to have a very strong spring... same thing.
Usually people clip the little legs off the stab inserts, that helps with that mushy feeling
Question for the pros... using regular cherry pcb mounted stabs (pretty sure they're cherry originals) with golden wires for the 6.25u spacebar. The thing feels mushy... this is the second keyboard that I make that has a mushy feeling spacebar :( What am I doing wrong?
Using box royals (purple). Also tried a clicky switch from Kailh that seems to have a very strong spring... same thing.
Usually people clip the little legs off the stab inserts, that helps with that mushy feeling
Almost feels like the spring from the switch itself isn't enough to return the key to its fully reset position.
I've had what might be a similar problem with Sprit's gold stab wires, I still don't know if it was something wrong with how it was installed, but swapping back to a normal Cherry wire fixed it for me.
Also make sure the wire isn't bent at all.
hey, could anyone tell me what kind of screw is used to attach the top part to the bottom part? my board only came with 7 screws and then i promptly lost one so i am down to 6.
thanks :)
So my Mira randomly started acting up last week. Key presses continue after the key is let go, they stop once the key is pressed again. I have a feeling it has something to do with the firmware, but I've tried loading the defaults and it didnt fix the issue. Could I possibly be stuck in a layer? Issue followed on another pc as well.
So my Mira randomly started acting up last week. Key presses continue after the key is let go, they stop once the key is pressed again. I have a feeling it has something to do with the firmware, but I've tried loading the defaults and it didnt fix the issue. Could I possibly be stuck in a layer? Issue followed on another pc as well.
Could it possibly be a sticky switch? Does the behaviour occur if you short the contacts for the key manually, or just when you use the switch?
Issue occurs on all switches
sure did
Working on it currently..
A wild Pikachu has appeared!
Working on it currently..
A wild Pikachu has appeared!
whats the deal with replacements? has this gb slid back into obscurity?
replacement parts rip?
replacement parts rip?
Waiting... Last I got a PM was 1 month ago or so.
Hi,
Those who are waiting for replacement parts, I'm trying to push for that to happen soon. We have a list of what needs to be replaced, and I hope zzyjayfree will be contacting you soon with details. Looks like EVE said that sending in defective parts won't be necessary. I'm really sorry it's taken so long.
Only took 6 months to get around building... :p
WKL MIra SE
65g Lubed Vintage Blacks
OG DeskoShow Image(https://farm2.staticflickr.com/1805/43359377892_eaacaf74b0_k.jpg)Show Image(https://farm1.staticflickr.com/915/42690800644_b83d2bd768_k.jpg)
Only took 6 months to get around building... :p
WKL MIra SE
65g Lubed Vintage Blacks
OG DeskoShow Image(https://farm2.staticflickr.com/1805/43359377892_eaacaf74b0_k.jpg)Show Image(https://farm1.staticflickr.com/915/42690800644_b83d2bd768_k.jpg)
Very nice! Looks awesome, as are most of your other boards :D
Did Desko originally come with those nipple F/J homing keys? I thought that was BSP Desko (https://geekhack.org/index.php?topic=57244.0).
Harvested this off a desko board i bought on ebay years ago, these are og
Only took 6 months to get around building... :p
WKL MIra SE
65g Lubed Vintage Blacks
OG DeskoMoreShow Image(https://farm2.staticflickr.com/1805/43359377892_eaacaf74b0_k.jpg)Show Image(https://farm1.staticflickr.com/915/42690800644_b83d2bd768_k.jpg)
Only took 6 months to get around building... :p
WKL MIra SE
65g Lubed Vintage Blacks
OG DeskoShow Image(https://farm2.staticflickr.com/1805/43359377892_eaacaf74b0_k.jpg)Show Image(https://farm1.staticflickr.com/915/42690800644_b83d2bd768_k.jpg)
Mira SE I have filled 5 sets of keyboard, including copper weight, you don't need to make up for the express delivery, everything is ready for me to make up for what you need. I will always be here ~ thank you for understanding and tolerance ~ @ninjadoc zzyjayfree Photoelectric thank you.Do you know if we can get confirmation as to whose parts are being prepared? I can PM too
Ah, but I only have these after sale lists from ZZ. :-[ :-[ :-[
Ah, but I only have these after sale lists from ZZ. :-[ :-[ :-[
I have a detailed list, and I’m always available to discuss it or offer assistance.
Having some trouble with my PCB after soldering in-switch LED's. Tested switches after soldering them, they worked fine. About halfway through soldering LED's, I started getting "USB device has malfunctioned". Anyone else had this issue?
Edit: happens both on USB 2.0 and 3.0 ports, tested on 2 PC's.
Here's some shots of the PCB: https://m.imgur.com/a/AokBoOJHaving some trouble with my PCB after soldering in-switch LED's. Tested switches after soldering them, they worked fine. About halfway through soldering LED's, I started getting "USB device has malfunctioned". Anyone else had this issue?
Edit: happens both on USB 2.0 and 3.0 ports, tested on 2 PC's.
Before you keep using the keyboard, unplug it. Check each LED that you've soldered and make sure you aren't shorting the two pins/pads.
I've been talking to EVE directly for the past couple of weeks. He's making replacement parts. I thought that was winding down, but the last message said 3 more weeks. For those who need a top or bottom replacement, he's making both top and bottom parts together for anodized color consistency.Thank you. This should apply for Moon as well, right? I also have stuff there to get.
I will be contacting people who need replacements shortly to get up-to-date shipping address information.
I've been talking to EVE directly for the past couple of weeks. He's making replacement parts. I thought that was winding down, but the last message said 3 more weeks. For those who need a top or bottom replacement, he's making both top and bottom parts together for anodized color consistency.Thank you. This should apply for Moon as well, right? I also have stuff there to get.
I will be contacting people who need replacements shortly to get up-to-date shipping address information.
Sent from my mobile using Tapatalk
Ah, my bad. EVE also did Moon, and zzyjayfree has been largely absent, so I thought they were being handled simultaneously.I've been talking to EVE directly for the past couple of weeks. He's making replacement parts. I thought that was winding down, but the last message said 3 more weeks. For those who need a top or bottom replacement, he's making both top and bottom parts together for anodized color consistency.Thank you. This should apply for Moon as well, right? I also have stuff there to get.
I will be contacting people who need replacements shortly to get up-to-date shipping address information.
Sent from my mobile using Tapatalk
I don't have anything to do with the MOON group buy :( I can ask though.
I have now contacted everyone on my list of people who reported defects and wanted replacements. I wrote asking to confirm the replacement parts as well as to get updated shipping address information. If for some reason you were not on my list and have not been contacted (and did not report a defect earlier), please send me a message ASAP!
Anyone have an alps plate and pcb they'd be able to part with?
My first and last custom :thumb:
(Attachment Link)
Show Image(https://i.imgur.com/wBdfdW2.jpg)
Show Image(https://i.imgur.com/wBdfdW2.jpg)
Classy. Love how clean that looks.
Thanks. Yeah I love the way this one turned out. I've been a bit strapped for cash recently though so I've been making a list of things to sell... this keeps making it to the list but every time I look at it... I don't want to sell it :confused:
Thanks. Yeah I love the way this one turned out. I've been a bit strapped for cash recently though so I've been making a list of things to sell... this keeps making it to the list but every time I look at it... I don't want to sell it :confused:
I would say it's a keeper :cool:
Thanks. Yeah I love the way this one turned out. I've been a bit strapped for cash recently though so I've been making a list of things to sell... this keeps making it to the list but every time I look at it... I don't want to sell it :confused:
I would say it's a keeper :cool:
Yeah I have a numbered one in black, and a lunar grey one... I'm taking the black one to my grave. Not quite as attached to the other 2 :D
I don't know if there's going to be a number pad. Still waiting to hear back on when the replacement parts are finished. Last I heard they were going through anodizing. j
I don't have you noted for any replacement parts.
I don't know if there's going to be a number pad. Still waiting to hear back on when the replacement parts are finished. Last I heard they were going through anodizing. j
I don't have you noted for any replacement parts.
I don't know if there's going to be a number pad. Still waiting to hear back on when the replacement parts are finished. Last I heard they were going through anodizing. j
I don't have you noted for any replacement parts.
Eason confirmed that a replacement SS Plate would be sent to me. I sent you a PM on Mon, 15 January 2018, 20:16:46 and you confirmed that it would.
Sounds good, thanks for clearing it up. So to confirm, at this point there is no updates or time frame from zjayfree or EVE?
I just got around to finishing my board.. it took some time...
Can someone help me out, is there a way to dim the Key-LEDs?
The "LED Mode" buttons in JigOn just cicle on/off/breathing for me.
Anything ever happen with the metal gasket on this? To replace the diffuser?
Does anyone know if the plate and pcbs available on kin's txkeyboards are compatible with this board?Plate no, PCB yes
Does anyone know if the plate and pcbs available on kin's txkeyboards are compatible with this board?Plate no, PCB yes
Does anyone know if the plate and pcbs available on kin's txkeyboards are compatible with this board?Plate no, PCB yes
Is there anywhere I can get replacement plates for the board?
Does anyone know if the plate and pcbs available on kin's txkeyboards are compatible with this board?Plate no, PCB yes
Is there anywhere I can get replacement plates for the board?
Mainly looking for a polycarb/acrylic plate/halfplate if possible.No such half plates that I've seen. I'd suggest looking for someone with the files and making the changes for a DIY project. Or could always get a full plate and snip it with some flush cutters.
Anything ever happen with the metal gasket on this? To replace the diffuser?
Not that I've heard or seen
Anyone here got plate files? Also will the SE plates fit the mira proto?
Does anyone know how much clearance there is between the switch pins and the bottom of the case?
I am thinking about using some thin washers between the plate and top case to try and lower the plate a little bit and make it a little more "high profile" as the bottom of keycaps sit a tad bit higher than normal (still looks great of course)
It's time for another run, no?
It's time for another run, no?
Does anybody know how to fix a Leeku PCB TX87 that is not recognized by windows... I get the "Unknown USB Device (Descriptor Request Failed)" message in device manager, the rgb underglow lights up and the per key rgb lights up when i hit the keys but windows doesn't recognize it.
Does anybody know how to fix a Leeku PCB TX87 that is not recognized by windows... I get the "Unknown USB Device (Descriptor Request Failed)" message in device manager, the rgb underglow lights up and the per key rgb lights up when i hit the keys but windows doesn't recognize it.
How to fix a crappy Leeku PCB 101:
Buy a Hiney PCB
MIRA SE #5 has finally been dusted off and built. Too lazy to order new upgraded parts so I went in raw with the original build.
67g Rosélio® Silent Linear switches. Krytox GPL205 lube on these cursed stabs. GMK Modern Dolch 2 Mist keycaps because I had it unopened. SS plate (the biggest pain in the ass I've ever worked with, wish I could go back and order brass.)
Thank you again Ninjadoc, Photoelectric, et al for seeing this through :thumb:
Sorry for the necrobump, I don't see much about the MIRA anywhere
I don't come around the mkb community much anymore so when I saw this thread it made me smile. I just looked at my Mira #34 the other day and thought about building it. Then put it back on the shelf. Maybe someday. Or maybe I'll just sell it. :-X
I don't come around the mkb community much anymore so when I saw this thread it made me smile. I just looked at my Mira #34 the other day and thought about building it. Then put it back on the shelf. Maybe someday. Or maybe I'll just sell it. :-XShow Image(https://i.imgur.com/NmrqwD1.jpg)Show Image(https://i.imgur.com/TF0ZUrW.jpg)
bad pics but mira 34 is built now
zealios v1 redux/zeal stabs/h87a
sent techmattr a DM offering to buy it basically as soon as i saw him post, got it in the mail day before yesterday and built it this evening
34 is my favorite number, excited to have this board
still have mira 29, it's been my daily for at least 4 years
if anyone has a pink mira (ideally numbered) they're not attached to let me know