Author Topic: Phantom PLATES (shipping) (Read 90050 times)

inteli722 · « **Reply #150 on:** Mon, 28 January 2013, 11:57:46 »

Man. I hope I didn't just miss this

If I can, could I order tonight (Central Time)? Or have you already closed?

Wildcard · « **Reply #151 on:** Mon, 28 January 2013, 12:04:44 »

If we end up being a few short for the WFD125 I could always add a few more to my order

TheQsanity · « **Reply #152 on:** Tue, 29 January 2013, 17:50:50 »

Are we still four under the prof layout?

Turkishrambo · « **Reply #153 on:** Tue, 29 January 2013, 19:54:26 »

I just submited the order.

I could have sworn i submitted an order a long time ago.

Let me know that i have an order for a single ansi 125, nothing more, or less

Thanks

******** if its too late, thats ok aswell, i already have a plate for my phantom, but i have 2 pcbs so ill need another plate sometime in the future.

inteli722 · « **Reply #154 on:** Tue, 29 January 2013, 21:10:43 »

Order placed.

Sai · « **Reply #155 on:** Wed, 30 January 2013, 21:45:41 »

the invoice is sending out now?

BimboBB · « **Reply #156 on:** Thu, 31 January 2013, 02:55:05 »

hey guys,

what is the plan with the plates which didnt reach the moq of 15, ie PRF125 or ISO 125? Are you gonna make them anyway (for higher price?) or will they be left out completely?

Gupgup · « **Reply #157 on:** Thu, 31 January 2013, 11:54:21 »

Could you drop the ANSI125 from my order please, leaving one ANSI150!

Thanks

nebo · « **Reply #158 on:** Thu, 31 January 2013, 12:21:56 »

Quote from: BimboBB on Thu, 31 January 2013, 02:55:05

hey guys,

what is the plan with the plates which didnt reach the moq of 15, ie PRF125 or ISO 125? Are you gonna make them anyway (for higher price?) or will they be left out completely?

If more orders are needed I only got the ANSI150 but would get HHK150 if it would help. Not sure what I'd use the extra numrow key for, but I'd figure it out.

jdcarpe · « **Reply #159 on:** Thu, 31 January 2013, 12:28:11 »

WFD, is this going forward even without 150 MOQ of plates?

I don't see HHK150 making it, as there are only 4 orders for it, currently. I won't be converting those to any 125 plates. I don't have any use for 1.25 mods on a Phantom, in all honesty. I was going to order a PRF125 plate just for fun, but I dunno if that's going to make 15 MOQ, either. I aleady have two ANS150 plates from DanGWanG/The_Beast, so I don't really need those, either. I was just ordering them to help the MOQ, and because WFD took the time and effort to fix minor issues with the spacing and cutouts for switch opening.

Soulpyre · « **Reply #160 on:** Thu, 31 January 2013, 13:28:15 »

Have the invoices gone out yet? I haven't gotten one yet. =X

inteli722 · « **Reply #161 on:** Thu, 31 January 2013, 13:32:11 »

I might as well shove some money over later to anodize it, since i'm likely going to take the keycaps off often to show off the Cherry MX Greens...Might as well have a plate that looks really cool. I'm thinking the color of the black iPad Mini (don't like Apple, but that color looks cool).

Acetrak · « **Reply #162 on:** Thu, 31 January 2013, 13:39:06 »

These are stainless steel so you'd have to paint or powercoat them if you are planning to recolor them

The_Beast · « **Reply #163 on:** Thu, 31 January 2013, 13:40:26 »

Quote from: Acetrak on Thu, 31 January 2013, 13:39:06

These are stainless steel so you'd have to paint or powercoat them if you are planning to recolor them

I'd go paint. I can see powder coating getting too thick to insert a switch into and you having to sand a ton of switch holes to get it to work. But that depends on how tight of a tolerance the laser guy used on this.

WhiteFireDragon · « **Reply #164 on:** Sat, 02 February 2013, 14:47:08 »

So many laggers here. The GB closed at 120 plates, a few days after the deadline there are 155 plates.

Anyways, I have an important update: USPS shipping prices just had a HUGE price increase in the past week. Bavman and I been trying to work out the best solution for the past week, and to save everyone double shipping costs of separate plates and PCB, he will ship the plates along with the PCBs. The shipping costs that he already charged for the PCBs were based on the old rates, which now has increased by at least a couple dollars for US, and even higher for international. So instead of paying separate shipping costs for these plates, there will be an extra $2 per plate to combine the shipping with the PCB. This helps cover the increased shipping costs for the PCBs, the added shipping weight of these plates, and costs of shipping the plates to bavman or profosist.

If I'm personally handling PCB/plate to combine with other packages or phantom assembly, there won't be that additional $2. I'll finally start to invoice.

dirge · « **Reply #165 on:** Sat, 02 February 2013, 14:52:35 »

I'm just down for plates bud do I need to settle up for anything?

metalliqaz · « **Reply #166 on:** Sat, 02 February 2013, 15:25:49 »

Should I have already paid an invoice? I don't think I got anything...

WhiteFireDragon · « **Reply #167 on:** Sat, 02 February 2013, 15:31:51 »

Quote from: dirge on Sat, 02 February 2013, 14:52:35

I'm just down for plates bud do I need to settle up for anything?

I actually sorted out a list of a small group of people that got plates only, including you. In this case, you'll just have to pay the full shipping cost since you didn't already have to pay the PCB shipping costs that most people paid for.

Quote from: metalliqaz on Sat, 02 February 2013, 15:25:49

Should I have already paid an invoice? I don't think I got anything...

I'm just starting the invoice, so no one has gotten it yet. Don't worry, you'll get it soon.

metalliqaz · « **Reply #168 on:** Sat, 02 February 2013, 15:36:36 »

No problemo

Denonic · « **Reply #169 on:** Sat, 02 February 2013, 17:46:29 »

I'm taking over AriesX pcb order from the other gb and was looking to take over their plate order from this gb also. But the order was for an iso 125. Id like an ANSI 150. Is that still ok? Pmd you about it.

dirge · « **Reply #170 on:** Sun, 03 February 2013, 03:27:17 »

Quote from: WhiteFireDragon on Sat, 02 February 2013, 15:31:51

I actually sorted out a list of a small group of people that got plates only, including you. In this case, you'll just have to pay the full shipping cost since you didn't already have to pay the PCB shipping costs that most people paid for.

Cool, will ours be sent out at the same time as phantom boards or just whenever they are finished?

wish the gh60 plates we being done too

metafour · « **Reply #171 on:** Sun, 03 February 2013, 13:20:20 »

Is it safe to say that all essential communication for the completion of my order will come by email? I need to take a break from the forums and I believe this is the last time-sensitive piece that I need in order to complete my Phantoms.

wogdog · « **Reply #172 on:** Mon, 04 February 2013, 12:28:26 »

paid!

metalliqaz · « **Reply #173 on:** Mon, 04 February 2013, 12:36:17 »

Paid.

mashby · « **Reply #174 on:** Mon, 04 February 2013, 12:39:34 »

Does it matter that the invoice doesn't show which plate design I chose?

bavman · « **Reply #175 on:** Mon, 04 February 2013, 12:47:30 »

I think he just put "phantom plate" for every ones order since it's all the same price. You can check the 2nd post of this thread to make sure your down for the correct plates.

Amarok · « **Reply #176 on:** Mon, 04 February 2013, 12:58:23 »

Paid!

mashby · « **Reply #177 on:** Mon, 04 February 2013, 13:12:16 »

Quote from: bavman on Mon, 04 February 2013, 12:47:30

I think he just put "phantom plate" for every ones order since it's all the same price. You can check the 2nd post of this thread to make sure your down for the correct plates.

Thanks bavman.

Invoice is paid.

remmeh · « **Reply #178 on:** Mon, 04 February 2013, 13:21:38 »

paid my invoice!

Soulpyre · « **Reply #179 on:** Mon, 04 February 2013, 13:23:42 »

Paid. Thanks Bavman

hluo87 · « **Reply #180 on:** Mon, 04 February 2013, 14:01:47 »

about to pay..
but i dont understand what does "PHANPlate-52" mean? I order ANSI125.....

Acetrak · « **Reply #181 on:** Mon, 04 February 2013, 14:10:42 »

Hi, sorry to be a pain in the butt but I have to cancel my order

Please let me know I need to do anything from my end! Again, I'm sorry about the hassle WFD!

whiskytango · « **Reply #182 on:** Mon, 04 February 2013, 14:46:20 »

Quote from: hluo87 on Mon, 04 February 2013, 14:01:47

about to pay..
but i dont understand what does "PHANPlate-52" mean? I order ANSI125.....

It means your are Phantom plate invoice number 52. Mine said something similar. Check the second post in this thread if you want to make sure your order is right

Turkishrambo · « **Reply #183 on:** Mon, 04 February 2013, 14:46:38 »

Quote from: Acetrak on Mon, 04 February 2013, 14:10:42

Hi, sorry to be a pain in the butt but I have to cancel my order

Please let me know I need to do anything from my end! Again, I'm sorry about the hassle WFD!

What are you getting? I may fill your spot.

Dgsbllx · « **Reply #184 on:** Mon, 04 February 2013, 14:49:51 »

Should I be worried if I haven't been invoiced yet?

Acetrak · « **Reply #185 on:** Mon, 04 February 2013, 15:01:35 »

I ordered a HHK150 layout that I no longer needed

WhiteFireDragon · « **Reply #186 on:** Mon, 04 February 2013, 15:31:08 »

Quote from: mashby on Mon, 04 February 2013, 12:39:34

Does it matter that the invoice doesn't show which plate design I chose?

It takes me too long to type out every plate for each different order. I've already spent hours on this, and not fully done with all domestic invoices. The international orders will get invoices later today or tomorrow. Check your order here instead, it's a more centralized place where I can update:

> YOUR PLATE ORDER <

Quote from: hluo87 on Mon, 04 February 2013, 14:01:47

about to pay..
but i dont understand what does "PHANPlate-52" mean? I order ANSI125.....

It means you're the 52nd person to receive the invoice for a phantom plate. That doesn't specify which plate you ordered.

Binge · « **Reply #187 on:** Mon, 04 February 2013, 15:48:28 »

Jupiter · « **Reply #188 on:** Mon, 04 February 2013, 16:34:58 »

Got my money sitting in my PayPal just waiting to pay

sleepy916 · « **Reply #189 on:** Mon, 04 February 2013, 16:36:49 »

Paid!

TheQsanity · « **Reply #190 on:** Mon, 04 February 2013, 17:46:50 »

Paid, I ordered the Prf plate. Is that what I will be getting?

r3dx · « **Reply #191 on:** Mon, 04 February 2013, 21:16:31 »

Paid.

Sai · « **Reply #192 on:** Mon, 04 February 2013, 21:31:03 »

still waiting for my invoice.

Edit : just received the invoice

Jupiter · « **Reply #193 on:** Mon, 04 February 2013, 23:00:05 »

Just recieved the invoice and paid it then for you.

Great job on the these group buys, WFD

Turkishrambo · « **Reply #194 on:** Mon, 04 February 2013, 23:22:17 »

paid!

phetto · « **Reply #195 on:** Mon, 04 February 2013, 23:43:51 »

FabsSpeed · « **Reply #196 on:** Mon, 04 February 2013, 23:45:26 »

Invoice paid

WhiteFireDragon · « **Reply #197 on:** Tue, 05 February 2013, 00:06:25 »

I just sent paypal invoices to almost everyone, and there were a few that I contacted in PM for large orders of more than 4 plates. If you haven't gotten an invoice yet or something looks incorrect, let me know. It took a long time and I did most of them in between RL tasks, so there might be some mistakes.

Lastly, I just want to thank anyone that paid so quickly or make it a hassle-free order. You guys make GB management so much easier.

TheQsanity · « **Reply #198 on:** Tue, 05 February 2013, 00:16:25 »

What plates didn't make it to the group buy?

Halverson · « **Reply #199 on:** Tue, 05 February 2013, 00:17:40 »

Ohhh phantom!

News:

Author Topic: Phantom PLATES (shipping) (Read 90050 times)