Post by: yuktsi on Sat, 09 September 2017, 12:07:43
(https://i.imgur.com/dqxFrWD.jpg)
The slots for the GB will be allocated by FCFS. 30 units will be available. I will share the link here on the 10th of September, 12PM Eastern Time.
More information about 910 Project
TGR-910 GB https://geekhack.org/index.php?topic=86047.0
TGR-910 CE IC https://geekhack.org/index.php?topic=91446.0
Poisonking's 910 http://imgur.com/a/tmk9W
Final design/render:
(https://i.imgur.com/JMeTYLg.jpg)
More
(https://i.imgur.com/2ds2WPm.jpg)
(https://i.imgur.com/TJoTe4j.jpg)
(https://i.imgur.com/epBt1O5.jpg)
(https://i.imgur.com/DztwHZo.jpg)
(https://i.imgur.com/jKxzNvg.jpg)
(https://i.imgur.com/TJoTe4j.jpg)
(https://i.imgur.com/epBt1O5.jpg)
(https://i.imgur.com/DztwHZo.jpg)
(https://i.imgur.com/jKxzNvg.jpg)
Supported layouts:
(http://i.imgur.com/egLkQZa.jpg)
Specifications:
- Full Kobelco 5052 aluminum case
- 8 degrees slope
- Brass weight
- Brass blocker at 910 logo cutout
- Plate material: sand-blasted brass
- ISO and ANSI
- Custom ps2avrGB PCB
- Fully Programmable
- Full LED backlighting
- Controller parts, diodes and resistors are presoldered
Color options:
Black, Grey and Pink
(https://i.imgur.com/twYZ8yp.jpg)
- Black/Grey
(https://i.imgur.com/SNBE41a.jpg)
- Pink
Price: (excluding paypal fees and shipping)
$334 for case + plate + PCB (presoldered with all the components except for switches, switch LEDs and RED LEDs)
$80 for brass plate + PCB (presoldered with all the components except for switches, switch LEDs and RED LEDs)
$15 for RGB Kit (RGB LEDs, acrylic diffuser for case and 910 cutout)
Shipping: Shipping will be from Malaysia. Shipping cost will depend on your location. Each set weighs about 3.5 kg with packaging. Shipping fee will be invoiced only after the keyboards are ready. Estimated shipping cost (US 60$, Asia 45$, Europe $55)
Deadline for order/payment: The groupbuy will end as soon as the MOQ is met, would appreciate if I am able to receive the payment asap.
Lead time: 8-10 weeks from the week of 18th September
Thank you!
Post by: yuktsi on Sat, 09 September 2017, 12:12:46
18th September 2017 - Payment received
19th September 2017 - Materials ordered
4th October 2017 - PCB Ordered
Post by: byker on Sat, 09 September 2017, 15:07:32
Post by: oatmicro on Sat, 09 September 2017, 15:07:51
Post by: switchnollie on Sat, 09 September 2017, 15:07:55
Post by: TelFiRE on Sat, 09 September 2017, 15:13:25
Post by: avid on Sat, 09 September 2017, 15:15:01
Is the pink color the same as Jane?
Post by: pr0ximity on Sat, 09 September 2017, 15:16:56
Post by: vegs on Sat, 09 September 2017, 15:19:48
Post by: Mr_BeastQuake on Sat, 09 September 2017, 15:23:07
Post by: Bits on Sat, 09 September 2017, 15:36:53
Still will probably jump for the black one
Sent from my ONEPLUS A3000 using Tapatalk
Post by: Sent on Sat, 09 September 2017, 15:37:44
Post by: Bits on Sat, 09 September 2017, 15:43:41
FCFS. :-\Better set that timer!
Sent from my ONEPLUS A3000 using Tapatalk
Post by: LDobler on Sat, 09 September 2017, 15:51:23
Post by: Puddsy on Sat, 09 September 2017, 15:52:16
Show Image(https://i.imgur.com/IV29byG.jpg)Show Image(https://i.imgur.com/dqxFrWD.jpg)
The slots for the GB will be allocated by FCFS. 30 units will be available. I will share the link here on the 10th of September, 12PM Eastern Time.
More information about 910 Project
TGR-910 GB https://geekhack.org/index.php?topic=86047.0
TGR-910 CE IC https://geekhack.org/index.php?topic=91446.0
Poisonking's 910 http://imgur.com/a/tmk9W
Final design/render:Show Image(https://i.imgur.com/JMeTYLg.jpg)MoreShow Image(https://i.imgur.com/2ds2WPm.jpg)Show Image(https://i.imgur.com/TJoTe4j.jpg)Show Image(https://i.imgur.com/epBt1O5.jpg)Show Image(https://i.imgur.com/DztwHZo.jpg)Show Image(https://i.imgur.com/jKxzNvg.jpg)
Supported layouts:Show Image(http://i.imgur.com/egLkQZa.jpg)
Specifications:
- Full Kobelco 5052 aluminum case
- 8 degrees slope
- Brass weight
- Brass blocker at 910 logo cutout
- Plate material: sand-blasted brass
- ISO and ANSI
- Custom ps2avrGB PCB
- Fully Programmable
- Full LED backlighting
- Controller parts, diodes and resistors are presoldered
Color options:
Black, Grey and PinkShow Image(https://i.imgur.com/twYZ8yp.jpg)
- Black/GreyShow Image(https://i.imgur.com/SNBE41a.jpg)
- Pink
Price: (excluding paypal fees and shipping)
$334 for case + plate + PCB (presoldered with all the components except for switches, switch LEDs and RED LEDs)
$80 for brass plate + PCB (presoldered with all the components except for switches, switch LEDs and RED LEDs)
$15 for RGB Kit (RGB LEDs, acrylic diffuser for case and 910 cutout)
Shipping: Shipping will be from Malaysia. Shipping cost will depend on your location. Each set weighs about 3.5 kg with packaging. Shipping fee will be invoiced only after the keyboards are ready. Estimated shipping cost (US 60$, Asia 45$, Europe $55)
Deadline for order/payment: The groupbuy will end as soon as the MOQ is met, would appreciate if I am able to receive the payment asap.
Lead time: 8-10 weeks from the week of 18th September
Thank you!
yejs
Post by: avid on Sat, 09 September 2017, 15:57:14
Post by: Puddsy on Sat, 09 September 2017, 16:01:50
Assuming you win, what color will you guys go with? Debating black vs pink.
pink for rarity factor
too many basic nerds going for black or grey
Post by: sundin on Sat, 09 September 2017, 16:04:04
Assuming you win, what color will you guys go with? Debating black vs pink.Pink top and black bottom.
Post by: Sent on Sat, 09 September 2017, 16:05:03
Assuming you win, what color will you guys go with? Debating black vs pink.
pink for rarity factor
too many basic nerds going for black or grey
Unless everyone goes in for pink. :eek:
Post by: Bits on Sat, 09 September 2017, 16:06:28
It's true. I'm too basic to pick pinkAssuming you win, what color will you guys go with? Debating black vs pink.
pink for rarity factor
too many basic nerds going for black or grey
Sent from my ONEPLUS A3000 using Tapatalk
Post by: avid on Sat, 09 September 2017, 16:14:14
Post by: Puddsy on Sat, 09 September 2017, 16:21:20
Pink is obviously very nice, but not sure if it's hard to match with keycaps. Do pink case go well with non-white/beige keysets?
dolch
Post by: pr0ximity on Sat, 09 September 2017, 16:38:45
Pink is obviously very nice, but not sure if it's hard to match with keycaps. Do pink case go well with non-white/beige keysets?
dolch
Gross.
Post by: Puddsy on Sat, 09 September 2017, 16:39:41
Pink is obviously very nice, but not sure if it's hard to match with keycaps. Do pink case go well with non-white/beige keysets?
dolch
Gross.
no u
Post by: LDobler on Sat, 09 September 2017, 16:41:43
Post by: finalarcadia on Sat, 09 September 2017, 17:15:51
Post by: lunr on Sat, 09 September 2017, 17:24:02
Post by: kawasaki161 on Sat, 09 September 2017, 17:30:00
Good luck to everyone, may your timing be good and your internet stable.
Post by: Kafka on Sat, 09 September 2017, 17:37:32
Pink is obviously very nice, but not sure if it's hard to match with keycaps. Do pink case go well with non-white/beige keysets?
dolch
Everything goes with dolch cmon man
Post by: lac29 on Sat, 09 September 2017, 17:42:10
Post by: xondat on Sat, 09 September 2017, 18:09:29
Looking really nice. Too bad it's such a limited release.
I'm sure there will be more in the future. Everything will be better at this lower quantity.
Post by: captainish on Sat, 09 September 2017, 18:13:27
Post by: jenggo on Sat, 09 September 2017, 18:14:01
[attachimg=1]
Post by: HappyCatFish on Sat, 09 September 2017, 18:56:57
I see that it's FCFS, I look at the time the GB opens, and I cry.
I am literally scheduled to hit the show open playback cue on the RLCS at that exact time... **** me lol
Post by: amnesia0287 on Sat, 09 September 2017, 19:31:58
I saw this thread, my mouth started watering, I got super excited, reading through the post.
I see that it's FCFS, I look at the time the GB opens, and I cry.
I am literally scheduled to hit the show open playback cue on the RLCS at that exact time... **** me lol
Yeah, i was hoping for raffle just cause with FCFS, there is often some people with a built in advantage just based on location. But I'm still gonna try :D. I need some sort of quality board and this one is amaze
Post by: ihalatch on Sat, 09 September 2017, 20:33:22
Post by: Sissy on Sat, 09 September 2017, 20:51:53
Best layout ever.
Post by: aaron6301 on Sat, 09 September 2017, 21:07:01
Post by: superdoedoe on Sat, 09 September 2017, 22:22:40
Post by: Sissy on Sun, 10 September 2017, 01:13:48
Post by: Zackfoo on Sun, 10 September 2017, 01:45:00
Sent from my SM-G935F using Tapatalk
Post by: Shoah on Sun, 10 September 2017, 01:55:49
Post by: yuktsi on Sun, 10 September 2017, 02:21:45
Not going to offer an option for diff color of top/bottom. Because it's going to make the color matching process a lot more difficult for those who ordered the same top/bottom color. Sorry.Assuming you win, what color will you guys go with? Debating black vs pink.Pink top and black bottom.
Anyone got any pictures of how the brass plates color will look.I actually have a sample with me. Will share it later when I have a better internet connection.
Does the TGR 910 CE have the same height and shape as the TGR Tris Numpad?They are basically the same except the Tris has an extra row.
Will the order form be posted in form of a new post or in the original post?I am thinking of updating it to the original post. Or new post would be a better idea?
Post by: darkslay3r on Sun, 10 September 2017, 02:26:39
Post by: yuktsi on Sun, 10 September 2017, 02:31:09
Can I join again?I don't encourage that. I do allow you to trade your SE with my CE though. What color do you want?
Sent from my SM-G935F using Tapatalk
Post by: Sissy on Sun, 10 September 2017, 02:47:29
Grey because it basically works with every keyset but Pink because its bright and stands out
Post by: Minha on Sun, 10 September 2017, 03:25:35
Post by: potatobot on Sun, 10 September 2017, 03:49:05
Post by: kbdfans on Sun, 10 September 2017, 04:56:23
Post by: avid on Sun, 10 September 2017, 05:03:52
I am thinking of updating it to the original post. Or new post would be a better idea?
I really like posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.
Post by: Shoah on Sun, 10 September 2017, 05:05:18
I support that idea, Im trying my luck on mobile today because Im on vacation.
I am thinking of updating it to the original post. Or new post would be a better idea?
I'd suggest posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.
Post by: futurecrime on Sun, 10 September 2017, 05:06:27
Post by: Murrellz on Sun, 10 September 2017, 06:32:09
Post by: vegs on Sun, 10 September 2017, 06:52:59
In the Case, PCB and Plate combo - is the plate included a brass plate?
Quote
Plate material: sand-blasted brassFrom OP, so I assume so
Post by: [Lewynlight] on Sun, 10 September 2017, 07:26:45
Can I join again?I don't encourage that. I do allow you to trade your SE with my CE though. What color do you want?
Sent from my SM-G935F using Tapatalk
zack, let's save for his new project instead ;)
Post by: cmd on Sun, 10 September 2017, 07:35:42
Post by: Zackfoo on Sun, 10 September 2017, 07:45:54
I'm just joking. I can't even put the SE off my desk for more than a day.Can I join again?I don't encourage that. I do allow you to trade your SE with my CE though. What color do you want?
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
Post by: blacksimon on Sun, 10 September 2017, 07:46:43
Post by: Zackfoo on Sun, 10 September 2017, 07:47:33
i really like this colorwayI agree that it is a lovely colourware. Thx for the compliment m8 (https://uploads.tapatalk-cdn.com/20170910/c5a3b557afd8b9e483d0282ef02d1b68.jpg)
(Attachment Link)
Sent from my SM-G935F using Tapatalk
Post by: Zackfoo on Sun, 10 September 2017, 07:49:35
I would do terrible, unspeakable things for a polycarb 910CELike stay up all night? Because that is the only **** you need to do calm your tits.
Sent from my SM-G935F using Tapatalk
Post by: avid on Sun, 10 September 2017, 09:02:31
Post by: yuktsi on Sun, 10 September 2017, 10:14:53
Alright, bro. Btw, this is what the finishing of the brass plate gonna look like
I am thinking of updating it to the original post. Or new post would be a better idea?
I really like posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.
(https://i.imgur.com/TsoFJYu.png)
Post by: limitz on Sun, 10 September 2017, 10:19:35
Alright, bro. Btw, this is what the finishing of the brass plate gonna look like
I am thinking of updating it to the original post. Or new post would be a better idea?
I really like posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.Show Image(https://i.imgur.com/TsoFJYu.png)
This looks sick. My wrists thank you.
Post by: avid on Sun, 10 September 2017, 10:30:45
Post by: Jedi on Sun, 10 September 2017, 10:31:49
Show Image(https://i.imgur.com/TsoFJYu.png)
Alice, is that you?
Post by: tuba section on Sun, 10 September 2017, 11:01:21
Post by: brighenne on Sun, 10 September 2017, 11:01:39
Post by: skidude9678 on Sun, 10 September 2017, 11:01:47
Post by: jeffbolton on Sun, 10 September 2017, 11:01:54
Post by: avid on Sun, 10 September 2017, 11:02:07
Post by: vegs on Sun, 10 September 2017, 11:02:13
Post by: futurecrime on Sun, 10 September 2017, 11:02:21
Post by: pixelpusher on Sun, 10 September 2017, 11:02:23
Post by: ihalatch on Sun, 10 September 2017, 11:02:31
Post by: amnesia0287 on Sun, 10 September 2017, 11:02:35
Hope I made it
+1
Post by: DanB on Sun, 10 September 2017, 11:02:42
I am happy that Sam Yuk Tsi added a captcha
Post by: oatmicro on Sun, 10 September 2017, 11:02:50
Post by: widdlekitty on Sun, 10 September 2017, 11:02:51
Post by: wanewang on Sun, 10 September 2017, 11:03:13
wish me luck!!
Post by: tireddoctor on Sun, 10 September 2017, 11:03:54
Post by: dblack on Sun, 10 September 2017, 11:04:09
Post by: lasermild on Sun, 10 September 2017, 11:05:56
Post by: anhkieet on Sun, 10 September 2017, 11:06:08
Post by: Shoah on Sun, 10 September 2017, 11:06:46
Post by: eyedrop on Sun, 10 September 2017, 11:07:24
Good luck everyone!
Sent from my Nexus 6P using Tapatalk
Post by: Tsuruya on Sun, 10 September 2017, 11:07:53
Post by: dallman5 on Sun, 10 September 2017, 11:09:17
I was in such a rush I forgot to fill in my full name...
I did the exact same thing :))
Post by: Rumblehotep on Sun, 10 September 2017, 11:09:24
Time to panic
Post by: Puddsy on Sun, 10 September 2017, 11:09:31
Just curious, why was the rgb kit not recommended?
Good luck everyone!
Sent from my Nexus 6P using Tapatalk
A lot of people don't like the look of RGB diffusers on boards. It was a controversial addition to the MIRA, for example.
Post by: oatmicro on Sun, 10 September 2017, 11:10:12
I was in such a rush I forgot to fill in my full name...
I did the exact same thing :))
+2 I totally forgot my own name for a moment because my brain was stopped working.
Post by: ewwgin on Sun, 10 September 2017, 11:12:00
Post by: Pepe_Silvia on Sun, 10 September 2017, 11:12:00
Post by: eyedrop on Sun, 10 September 2017, 11:12:58
Sent from my Nexus 6P using Tapatalk
Post by: yuktsi on Sun, 10 September 2017, 11:13:39
I was in such a rush I forgot to fill in my full name...Don't worry you can edit it later.
Just curious, why was the rgb kit not recommended?RGB isn't really pratical imo.
Good luck everyone!
Sent from my Nexus 6P using Tapatalk
Post by: yuktsi on Sun, 10 September 2017, 11:14:30
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
Post by: Puddsy on Sun, 10 September 2017, 11:15:43
Hi, I have stopped accepting any more order submission. The cutoff time was at around 12:01:07 ET
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
No list so we can at least see if we got in?
Oh well.
Post by: avid on Sun, 10 September 2017, 11:16:38
Post by: cmd on Sun, 10 September 2017, 11:16:45
Hi, I have stopped accepting any more order submission. The cutoff time was at around 12:01:07 ET
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
No list so we can at least see if we got in?
Oh well.
Lol.
Post by: futurecrime on Sun, 10 September 2017, 11:20:02
Post by: Kafka on Sun, 10 September 2017, 11:20:33
Sent from my iPhone using Tapatalk
Post by: amnesia0287 on Sun, 10 September 2017, 11:21:57
Post by: eyedrop on Sun, 10 September 2017, 11:22:38
Sent from my Nexus 6P using Tapatalk
Post by: ewwgin on Sun, 10 September 2017, 11:23:05
Post by: vtachkov on Sun, 10 September 2017, 11:23:25
I was in such a rush I forgot to fill in my full name...
I did the exact same thing :))
+2 I totally forgot my own name for a moment because my brain was stopped working.
Glad I'm not the only one. I was able to edit one field but then realized my state is missing. Oops.
Edit: I hope editing my original submission doesn't move me to the back of the line!
Post by: Bits on Sun, 10 September 2017, 11:24:44
Sent from my ONEPLUS A3000 using Tapatalk
Post by: neralo on Sun, 10 September 2017, 11:25:39
What's that ergo board anyway? It looks so good! :eek:
IIRC thats the TGR Alice that was first teased slightly in the TGR Tris GB thread. Looks like there's a physical model now.
Post by: quanghuy1200 on Sun, 10 September 2017, 11:25:49
Hi, I have stopped accepting any more order submission. The cutoff time was at around 12:01:07 ET
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
Good Night bro
Post by: quanghuy1200 on Sun, 10 September 2017, 11:27:11
i really like this colorwayI agree that it is a lovely colourware. Thx for the compliment m8
(Attachment Link)Show Image(https://uploads.tapatalk-cdn.com/20170910/c5a3b557afd8b9e483d0282ef02d1b68.jpg)
Sent from my SM-G935F using Tapatalk
Stop make me feel bad for not get a pink one :'(
Post by: Rumblehotep on Sun, 10 September 2017, 11:27:29
I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Hmm mine was :02 so I guess I'm cut off for sure then. C'est la guerre
Post by: [Lewynlight] on Sun, 10 September 2017, 11:29:22
Hi, I have stopped accepting any more order submission. The cutoff time was at around 12:01:07 ET
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
holy hell. 1 minute lol.
Post by: Tsuruya on Sun, 10 September 2017, 11:29:49
I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Same. I wish email delivery time was displayed down to the seconds.
Post by: ewwgin on Sun, 10 September 2017, 11:35:02
Thanks for sharing! Exciting times await us I guess. Looking forward to Alice!What's that ergo board anyway? It looks so good! :eek:
IIRC thats the TGR Alice that was first teased slightly in the TGR Tris GB thread. Looks like there's a physical model now.
Post by: lunr on Sun, 10 September 2017, 11:38:12
Post by: yicaoyimu on Sun, 10 September 2017, 11:39:38
I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Same. I wish email delivery time was displayed down to the seconds.
If you are using gmail like me, you can click on the drop down arrow on the google form email and click "show original" and check the "received" field. I'm sure other email services have that too.
Post by: amnesia0287 on Sun, 10 September 2017, 11:39:49
I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Same. I wish email delivery time was displayed down to the seconds.
In gmail you can see the exact time if you choose view original. Mine sadly is 9:01:43, so looks like i r looser. I tested with my own form, and that email sends within a second or two.
Post by: DanB on Sun, 10 September 2017, 11:41:18
Post by: Zackfoo on Sun, 10 September 2017, 11:42:52
Post by: amnesia0287 on Sun, 10 September 2017, 11:43:08
Mine is 12:01:07 :eek: :eek: :eek: :eek: :eek: :eek:
Maybegrats? :-\
Post by: DanB on Sun, 10 September 2017, 11:47:03
At least I have other Kustoms so it won't hurt too badly if I don't get in.
Post by: skidude9678 on Sun, 10 September 2017, 11:47:27
Post by: Tsuruya on Sun, 10 September 2017, 11:48:23
I switched to classic view and view header since I checked via mobile. Looks like I'm 45 seconds late. Honestly not that surprised since the thread was struggling to load at 12:00 on the dot so I got a late start.I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Same. I wish email delivery time was displayed down to the seconds.
If you are using gmail like me, you can click on the drop down arrow on the google form email and click "show original" and check the "received" field. I'm sure other email services have that too.
Post by: Sent on Sun, 10 September 2017, 13:00:27
Whelp, grats to those that got in.
Post by: theillumedpanda on Sun, 10 September 2017, 13:19:24
Congrats to all of you who got in!
Post by: pixelpusher on Sun, 10 September 2017, 13:36:55
Slept through my alarm for the first time in years. Of course. :rolleyes:
Whelp, grats to those that got in.
Probably wouldn't have helped. I had the page open and hit F5 and got the form the SECOND it was available. Filled it out as fast as I possibly could, making no mistakes or having to correct anything. Hit submit... and from the way things sound, I did not make it. Was about 30 seconds too late.
Post by: nastrovje on Sun, 10 September 2017, 13:50:01
Post by: xondat on Sun, 10 September 2017, 13:52:38
Will there be brass inserts for the 910 logo? That would be so nice!
OP says so in specifications.
Post by: tireddoctor on Sun, 10 September 2017, 14:06:22
Post by: Puddsy on Sun, 10 September 2017, 14:17:54
How do we know if we got in?
Yutski will invoice winners tomorrow.
Post by: Pragmatizm on Sun, 10 September 2017, 16:25:04
Post by: fublamchu on Sun, 10 September 2017, 16:50:11
Post by: captainish on Sun, 10 September 2017, 20:37:45
Post by: jhihguan on Sun, 10 September 2017, 20:49:20
filled in a little late...
really want a pink one!
Post by: Sissy on Sun, 10 September 2017, 22:20:13
Cheers for the picture. Good color of Brass I likeAlright, bro. Btw, this is what the finishing of the brass plate gonna look like
I am thinking of updating it to the original post. Or new post would be a better idea?
I really like posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.Show Image(https://i.imgur.com/TsoFJYu.png)
Post by: ewwgin on Sun, 10 September 2017, 22:54:49
Sent from my iPhone using Tapatalk
Post by: aznreaper on Sun, 10 September 2017, 23:33:33
Post by: romevi on Sun, 10 September 2017, 23:42:36
Post by: brighenne on Sun, 10 September 2017, 23:56:45
Did I winned?
Ur mam winned.
Post by: romevi on Mon, 11 September 2017, 00:42:10
Did I winned?
Ur mam winned.
Haha.
Post by: klove4252 on Mon, 11 September 2017, 06:57:13
Post by: ihalatch on Mon, 11 September 2017, 07:20:01
Post by: DALExSNAIL on Mon, 11 September 2017, 07:33:01
Any spreadsheet with the first 30 lucky ones?
Not yet
Post by: punksinatra on Mon, 11 September 2017, 09:29:47
Post by: SBN on Mon, 11 September 2017, 09:43:51
Post by: yuktsi on Mon, 11 September 2017, 09:50:35
So what is the cutoff time to pay invoices? There should be one I guess :pI don't really have one normally, as soon as possible?
Post by: Pragmatizm on Mon, 11 September 2017, 09:51:21
Are the invoices out? So everybody without one yet was too late?
I suspect if the invoices were going out, more people would be posting about it and Yutski would have said something.
Post by: punksinatra on Mon, 11 September 2017, 09:54:18
So what is the cutoff time to pay invoices? There should be one I guess :pI don't really have one normally, as soon as possible?
I think it would be best if there were cutoffs for that too and if the time lapse give the spot to the one next in line so the buy can get moving the soonest?
Post by: yuktsi on Mon, 11 September 2017, 10:06:01
Yeah, I just had the time to look at the spreadsheet right now.Are the invoices out? So everybody without one yet was too late?
I suspect if the invoices were going out, more people would be posting about it and Yutski would have said something.
Invoices will be sent within the next hour.
Post by: Littleteeto on Mon, 11 September 2017, 10:13:14
Yeah, I just had the time to look at the spreadsheet right now.Are the invoices out? So everybody without one yet was too late?
I suspect if the invoices were going out, more people would be posting about it and Yutski would have said something.
Invoices will be sent within the next hour.
Is it possible for you to release the Spreadsheet :D I think some people might have errors on paypal email address etc.
Also the suspense is insane!
Post by: vtachkov on Mon, 11 September 2017, 10:16:03
Post by: Avendar on Mon, 11 September 2017, 10:18:54
Post by: Pragmatizm on Mon, 11 September 2017, 10:19:27
Post by: ___q on Mon, 11 September 2017, 10:21:30
Post by: luumii on Mon, 11 September 2017, 10:25:23
Post by: Puddsy on Mon, 11 September 2017, 10:43:03
thanks friendo
Post by: o3okevin on Mon, 11 September 2017, 10:45:17
Post by: captainish on Mon, 11 September 2017, 10:47:22
Post by: avid on Mon, 11 September 2017, 10:48:44
Thanks yuktsi. :thumb:
Post by: xondat on Mon, 11 September 2017, 10:49:46
Post by: yuktsi on Mon, 11 September 2017, 10:50:48
Btw, I've accounted approx. 12$ for packaging, so we should be expecting more interesting than the previous rounds. Not sure about the sleeve, but I should be able to throw in a few ml of Zack's secret switch lube.
Payment will be submitted to the manufacturer on Monday. Let's hope everything will go well and we can have another round of 910CE GB in November, for those who didn't make it this round. If things go as planned, that might be the last GB from TGR. Hopefully. :blank:
Once again, thank you all for the overwhelming response <3
Post by: Goon on Mon, 11 September 2017, 10:51:18
Post by: aznreaper on Mon, 11 September 2017, 10:56:23
All invoices are out, ideally, I am hoping to receive all payments by Friday. But if you have difficulty paying before that, do dm me. We may be able to work something out.
Btw, I've accounted approx. 12$ for packaging, so we should be expecting more interesting than the previous rounds. Not sure about the sleeve, but I should be able to throw in a few ml of Zack's secret switch lube.
Payment will be submitted to the manufacturer on Monday. Let's hope everything will go well and we can have another round of 910CE GB in November, for those who didn't make it this round. If things go as planned, that might be the last GB from TGR. Hopefully. :blank:
Once again, thank you all for the overwhelming response <3
Wow! Thanks for making my day, glad to see another chance to get this board in the future!
Post by: anhkieet on Mon, 11 September 2017, 10:59:42
Post by: futurecrime on Mon, 11 September 2017, 11:00:28
Post by: SixtyLife on Mon, 11 September 2017, 11:16:46
Post by: skidude9678 on Mon, 11 September 2017, 11:35:44
Post by: Rumblehotep on Mon, 11 September 2017, 11:36:48
Post by: LDobler on Mon, 11 September 2017, 11:50:07
Post by: lunr on Mon, 11 September 2017, 12:10:12
Also, thank you Yuktsi for this GB :)
Post by: pixelpusher on Mon, 11 September 2017, 12:12:29
Post by: Goon on Mon, 11 September 2017, 12:15:56
Post by: Krytone on Mon, 11 September 2017, 12:43:27
(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910
Post by: yuktsi on Mon, 11 September 2017, 12:50:47
Yuktsi's last moment with my super smooth alice :pHaih got scammed. Give me Robin :mad:Show Image(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910
Post by: DanB on Mon, 11 September 2017, 14:29:57
Any chance we could see the spreadsheet?
Post by: RocketGruntJake on Mon, 11 September 2017, 14:39:25
Yuktsi's last moment with my super smooth alice :pShow Image(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910
Where can I read more about this board :eek:
Post by: futurecrime on Mon, 11 September 2017, 15:09:40
Post by: romevi on Mon, 11 September 2017, 15:22:30
Yuktsi's last moment with my super smooth alice :pShow Image(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910
(http://i.imgur.com/SGaMufd.jpg)
Post by: smittysteve on Mon, 11 September 2017, 15:32:22
Yuktsi's last moment with my super smooth alice :pShow Image(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910Show Image(http://i.imgur.com/SGaMufd.jpg)
It's funny 'cuz it's true. That Ergo looks TASTY!!
Post by: energyd on Mon, 11 September 2017, 18:03:30
Really curious to see the speadsheet about position!
Also yuktsi, will the next round favor people like me who is a few secs late this time?
Thanks!
All invoices are out, ideally, I am hoping to receive all payments by Friday. But if you have difficulty paying before that, do dm me. We may be able to work something out.
Btw, I've accounted approx. 12$ for packaging, so we should be expecting more interesting than the previous rounds. Not sure about the sleeve, but I should be able to throw in a few ml of Zack's secret switch lube.
Payment will be submitted to the manufacturer on Monday. Let's hope everything will go well and we can have another round of 910CE GB in November, for those who didn't make it this round. If things go as planned, that might be the last GB from TGR. Hopefully. :blank:
Once again, thank you all for the overwhelming response <3
Post by: lvince95 on Mon, 11 September 2017, 19:30:29
:( sad that I missed it..probably wasted 5 sec to make sure info(address, phone, etc) filled in is correct. Didn't know that we can just fill it out loosely and modify later. Oh well, congrats to people who got in.
Really curious to see the speadsheet about position!
Also yuktsi, will the next round favor people like me who is a few secs late this time?
Thanks!All invoices are out, ideally, I am hoping to receive all payments by Friday. But if you have difficulty paying before that, do dm me. We may be able to work something out.
Btw, I've accounted approx. 12$ for packaging, so we should be expecting more interesting than the previous rounds. Not sure about the sleeve, but I should be able to throw in a few ml of Zack's secret switch lube.
Payment will be submitted to the manufacturer on Monday. Let's hope everything will go well and we can have another round of 910CE GB in November, for those who didn't make it this round. If things go as planned, that might be the last GB from TGR. Hopefully. :blank:
Once again, thank you all for the overwhelming response <3
I hope its done FCFS again, but with those who entered and won this round disqualified. I don't think there should be any favoring. That's a topic when the next gb comes around anyway, it's still 2 months away.
Post by: Rumblehotep on Mon, 11 September 2017, 19:43:39
Didn't know that we can just fill it out loosely and modify later.
Whoa I didn't even think of that, I have so much still to learn!
Post by: Mr_BeastQuake on Mon, 11 September 2017, 20:04:41
Didn't know that we can just fill it out loosely and modify later. Oh well, congrats to people who got in.
Sucks to not get in on sales. However, I don't think suggesting people should submit a less than properly filled out form then edit it later is constructive to the GB now.
Post by: brighenne on Mon, 11 September 2017, 20:14:06
I hope its done FCFS again, but with those who entered and won this round disqualified. I don't think there should be any favoring. That's a topic when the next gb comes around anyway, it's still 2 months away.
Disqualifying people is itself favoring. Not saying I disagree with you, but your first two sentences seem at odds to me. FCFS inherently favors people who are faster, but disqualifying the last winners is systematically favoring the second fastest group over the fastest group lol.
Post by: yuktsi on Mon, 11 September 2017, 20:37:04
Cheers.
Post by: amnesia0287 on Mon, 11 September 2017, 20:41:27
To be fair, I filled it out accurately and completely and still got in.I hope its done FCFS again, but with those who entered and won this round disqualified. I don't think there should be any favoring. That's a topic when the next gb comes around anyway, it's still 2 months away.
Disqualifying people is itself favoring. Not saying I disagree with you, but your first two sentences seem at odds to me. FCFS inherently favors people who are faster, but disqualifying the last winners is systematically favoring the second fastest group over the fastest group lol.
That is not what it means to favor someone. You are also assuming there are no people who just missed the start or were busy.
His point was that people who tried and lost this time should not get extra bias, people who already have one should be back of the bus.
Also if you read back a few pages I'm pretty sure Yuktsi was asked by someone with an R1 if they could participate and they were told if they trade in the current one, so I am under the assumption that system would continue.
Post by: kmba on Mon, 11 September 2017, 20:52:15
Post by: yuktsi on Mon, 11 September 2017, 20:54:18
I don't have any particular rules when comes to a situation like this or payment deadline. I am not completely unbias either, but I am prioritizing those who haven't owned one before and try to accommodate as many as possible.To be fair, I filled it out accurately and completely and still got in.I hope its done FCFS again, but with those who entered and won this round disqualified. I don't think there should be any favoring. That's a topic when the next gb comes around anyway, it's still 2 months away.
Disqualifying people is itself favoring. Not saying I disagree with you, but your first two sentences seem at odds to me. FCFS inherently favors people who are faster, but disqualifying the last winners is systematically favoring the second fastest group over the fastest group lol.
That is not what it means to favor someone. You are also assuming there are no people who just missed the start or were busy.
His point was that people who tried and lost this time should not get extra bias, people who already have one should be back of the bus.
Also if you read back a few pages I'm pretty sure Yuktsi was asked by someone with an R1 if they could participate and they were told if they trade in the current one, so I am under the assumption that system would continue.
Btw, I will share some dimension later to those who want to have their own sleeve or wrist rest made. I have plate files and PCB layout files shared in 910 GB thread, you may head over thereif you want to make a different plate/pcb too.
Post by: superdoedoe on Mon, 11 September 2017, 21:41:35
Post by: Rumblehotep on Mon, 11 September 2017, 22:16:19
Post by: yicaoyimu on Tue, 12 September 2017, 00:44:48
Post by: pr0ximity on Tue, 12 September 2017, 05:47:49
Can the next one not be at 2am pls :blank:
It's always 2am somewhere, unfortunately.
Post by: Sissy on Tue, 12 September 2017, 05:56:37
The amount of times Ive got up in the middle of the night or had a "toilet break" during the day for Brocaps and other things.Can the next one not be at 2am pls :blank:
It's always 2am somewhere, unfortunately.
Never thought Keyboards would do this to me when I purchased my first one.
Post by: Kafka on Tue, 12 September 2017, 14:32:27
Sent from my iPhone using Tapatalk
Post by: aznreaper on Tue, 12 September 2017, 15:21:24
Post by: yuktsi on Wed, 13 September 2017, 08:53:00
Will you be open for different colours for the next buy? Silver wasn't an option this time, just wondering if there is a possiblity that the colours might change next time?I will if there's a demand.
Post by: romevi on Wed, 13 September 2017, 09:19:59
Post by: Kafka on Wed, 13 September 2017, 10:04:10
Is there anyway to get a board to have the same finish as the sandblasted brass plate from the Alice picture? I love how its a muted gold. I'd instabuy.Will you be open for different colours for the next buy? Silver wasn't an option this time, just wondering if there is a possiblity that the colours might change next time?I will if there's a demand.
Post by: cmd on Wed, 13 September 2017, 11:29:59
Will you be open for blue and silver?
Nah
Post by: Pragmatizm on Wed, 13 September 2017, 11:41:46
Will you be open for blue and silver?
Or cerakote white, like the norbauer case.
Post by: yuktsi on Wed, 13 September 2017, 11:44:16
cerakote is pretty dope. I wish I can find an applicator here in Malaysia. :'(Will you be open for blue and silver?
Or cerakote white, like the norbauer case.
Post by: lunr on Wed, 13 September 2017, 12:59:32
Post by: Bits on Wed, 13 September 2017, 15:41:27
Will you be open for blue and silver?This! I really like that pair
Post by: romevi on Wed, 13 September 2017, 16:49:23
Will you be open for blue and silver?This! I really like that pair
OMG Same! Let's cross our fingers (and toes)!
Post by: SixtyLife on Wed, 13 September 2017, 18:12:36
Post by: Pragmatizm on Wed, 13 September 2017, 18:25:13
silver in the render looks so good
I did look good, I was honestly surprised it was not option. But there must have been enough interest in pink to make that an option over silver.
Post by: raymogi on Wed, 13 September 2017, 22:31:17
Post by: Sissy on Thu, 14 September 2017, 04:20:50
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Post by: SBN on Thu, 14 September 2017, 05:02:10
Will you be open for different colours for the next buy? Silver wasn't an option this time, just wondering if there is a possiblity that the colours might change next time?I will if there's a demand.
Silver and purple pls :P
Post by: Rumblehotep on Thu, 14 September 2017, 09:47:05
silver in the render looks so goodAye I went for silver in the IC too
Post by: yuktsi on Thu, 14 September 2017, 10:43:00
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Post by: romevi on Thu, 14 September 2017, 10:51:49
the wait for this is gonna kill me more than any other single keyboard thing.
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Silent black :-*
Post by: Pragmatizm on Thu, 14 September 2017, 11:31:23
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Im going to put Tealios in mine.
Post by: avid on Thu, 14 September 2017, 11:34:38
Vintage black :-*
Spring weight? :D
Post by: romevi on Thu, 14 September 2017, 11:35:35
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Im going to put Tealios in mine.
(https://i.imgur.com/HkymH47.jpg)
Post by: Pragmatizm on Thu, 14 September 2017, 11:46:01
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Im going to put Tealios in mine.Show Image(https://i.imgur.com/HkymH47.jpg)
I get the sense you disapprove.
Post by: [Lewynlight] on Thu, 14 September 2017, 21:23:01
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Im going to put Tealios in mine.Show Image(https://i.imgur.com/HkymH47.jpg)
eeh why? was going to put in tealios on mine as well :))
Post by: darkslay3r on Fri, 15 September 2017, 02:54:15
Wow I missed this by about... 4 days :(
don't worry
i heard about R2 of this CE
Post by: yonghf on Fri, 15 September 2017, 04:07:23
Post by: xondat on Fri, 15 September 2017, 04:38:43
Pardon my ignorance but what does CE stand for?
Cool Edition.
(I don't actually know).
Post by: Zackfoo on Fri, 15 September 2017, 06:56:21
Post by: romevi on Fri, 15 September 2017, 07:31:00
Post by: lunr on Fri, 15 September 2017, 12:04:26
I got bored and went through the 910 GB thread and noticed there were delays with people who choose grey/black colours. Could you say it might happen with this GB yuktsi?
Post by: DALExSNAIL on Fri, 15 September 2017, 12:39:29
Can I get an anseer yuktsi? Looks like it got burried from all these "I want this colour" posts.I got bored and went through the 910 GB thread and noticed there were delays with people who choose grey/black colours. Could you say it might happen with this GB yuktsi?
This is most likely something he could not tell you at this moment, as it came as a surprise before. If you read the posts about the delays then you knows it was an issue with damage due to mishandling. Not really possible to foresee this kind of info.
Post by: yuktsi on Fri, 15 September 2017, 13:18:49
Hi lunr, I've told them to be extra careful. Hope everything will go smoothly this round.Can I get an anseer yuktsi? Looks like it got burried from all these "I want this colour" posts.I got bored and went through the 910 GB thread and noticed there were delays with people who choose grey/black colours. Could you say it might happen with this GB yuktsi?
This is most likely something he could not tell you at this moment, as it came as a surprise before. If you read the posts about the delays then you knows it was an issue with damage due to mishandling. Not really possible to foresee this kind of info.
Post by: lunr on Fri, 15 September 2017, 16:30:40
Hi lunr, I've told them to be extra careful. Hope everything will go smoothly this round.Can I get an anseer yuktsi? Looks like it got burried from all these "I want this colour" posts.I got bored and went through the 910 GB thread and noticed there were delays with people who choose grey/black colours. Could you say it might happen with this GB yuktsi?
This is most likely something he could not tell you at this moment, as it came as a surprise before. If you read the posts about the delays then you knows it was an issue with damage due to mishandling. Not really possible to foresee this kind of info.
Post by: avid on Sat, 16 September 2017, 15:43:41
Post by: yuktsi on Sun, 17 September 2017, 06:32:11
Is there any numbers of how many ordered black/grey/pink? Would be interesting to see :)Around 40% Grey, 30% grey and 30% pink :cool:
Post by: LDobler on Sun, 17 September 2017, 06:37:56
Is there any numbers of how many ordered black/grey/pink? Would be interesting to see :)Around 40% Grey, 30% grey and 30% pink :cool:
I guess you meant 40% black, 30% grey and 30% pink ;D
Post by: yuktsi on Sun, 17 September 2017, 06:39:53
Sorry! I meant 40% grey, 30% black and 30% pinkIs there any numbers of how many ordered black/grey/pink? Would be interesting to see :)Around 40% Grey, 30% grey and 30% pink :cool:
I guess you meant 40% black, 30% grey and 30% pink ;D
Post by: LDobler on Sun, 17 September 2017, 06:42:46
Sorry! I meant 40% grey, 30% black and 30% pinkIs there any numbers of how many ordered black/grey/pink? Would be interesting to see :)Around 40% Grey, 30% grey and 30% pink :cool:
I guess you meant 40% black, 30% grey and 30% pink ;D
Thanks for the clarification mate :thumb:
Post by: cmd on Mon, 09 October 2017, 09:58:40
11th September 2017 - Invoices sent
18th September 2017 - Payment received
19th September 2017 - Materials ordered
4th October 2017 - PCB Ordered
:thumb:
Post by: kawasaki161 on Mon, 09 October 2017, 11:52:10
If you read the IC you might have seen that I wanted to make a QMK PCB for this, well, I've got them finished and tested. The MOQ for the PCB maker was 5, so I have 3 leftover PCBs.
If anyone is interested in one of them please PM me, I'm just trying to recoup my losses, so they'll be 35€ plus shipping each, this includes fees but not shipping and packaging (shipping is 6.20€ tracked, packaging is free if I can find enough boxes or whatever it costs me (probably 1-2€ per package) if I don't.
The PCBs do NOT support in switch LEDs and do NOT support RGB underglow/logo lighting. They do, however, support all the layouts this case supports.
Edit: All gone
Post by: DanB on Sun, 15 October 2017, 22:18:29
Post by: kawasaki161 on Mon, 16 October 2017, 08:44:34
Hi guys.
If you read the IC you might have seen that I wanted to make a QMK PCB for this, well, I've got them finished and tested. The MOQ for the PCB maker was 5, so I have 3 leftover PCBs.
If anyone is interested in one of them please PM me, I'm just trying to recoup my losses, so they'll be 35€ plus shipping each, this includes fees but not shipping and packaging (shipping is 6.20€ tracked, packaging is free if I can find enough boxes or whatever it costs me (probably 1-2€ per package) if I don't.
The PCBs do NOT support in switch LEDs and do NOT support RGB underglow/logo lighting. They do, however, support all the layouts this case supports.
Edit: All gone
Seems like there were more people interested in this than I had PCBs. I'll need another 3 additional people to reach the MOQ it seems.
Edit: So, I was asked why I made these in the first place, here is my personal reason for it (there are more reasons than just that for others though):
There are two microcontrollers that are commonly used for our custom keyboards, the 32u4 (used for QMK,TMK and O2D) and the 32a (used for BootmapperClient/ps2avrGB and Jigon).
From my personal observations I came to the conclusion that the time from when you press the key to when it registers on the computer on 32a implementations is a bit longer than on 32u4 implementations.
In the grand scheme of things this does not matter for 99% of users, but if you are playing rhythm games with very tight timing windows and are used to the faster one it makes a very big difference.
Let's say your timing window is 30ms, which means there are 15ms before and after the perfect timing that it still counts, let's just assume the increased delay is 5ms higher (this is NOT the actual value as I can't accurately measure it). This effectively makes your hitwindow 5ms smaller as well as making every hitsound appear 5ms later than you'd expect it, which will make everything feel wrong.
Q: "I don't play these games, why would I care?"
A: If you don't use any of the other features QMK offers that BMC or Jigon do not offer you have no reason to, even for normal competetive gaming it does not make any significant difference.
Why else would you want QMK?
1: More functions like:
-Dynamic (on the fly) Macros up to 128 keystrokes
-Locking keys (ever played DayZ and had to walk 4km in a straight line? Yeah, just lock your "w" key for that time and give your hand a rest)
-Tap Dancing, Leader Keys
-and more https://docs.qmk.fm/features.html
2: It's an open source community project
3: Higher compatibility with USB-Hubs and certain USB controllers that don't like the emulated V-USB approach of ps2avrGB
4: <insert whatever I forgot to add>
Post by: Mr_BeastQuake on Mon, 16 October 2017, 10:35:14
Post by: vegs on Mon, 16 October 2017, 13:12:50
-snip-I'm in for one or two.
Post by: yuktsi on Sun, 05 November 2017, 20:36:22
Everything other than the top/bottom case are in good progress. It's very likely that I won't be able to deliver by the 10th week. I should have an updated timeline by the end of this week, most likely can be done by the 12th week or sooner.
- unassmebled PCB
(https://i.imgur.com/ByjUuBV.jpg)
- 910 polished brass insert
(https://i.imgur.com/GgDzxGq.jpg)
- cnc milled brass plate
(https://i.imgur.com/cjAzoUe.jpg)
Post by: Puddsy on Sun, 05 November 2017, 20:41:03
Post by: Sissy on Sun, 05 November 2017, 20:43:30
Post by: vtachkov on Sun, 05 November 2017, 22:40:55
Post by: ramnes on Mon, 06 November 2017, 11:23:51
Post by: aznreaper on Mon, 06 November 2017, 18:24:26
Post by: Mr_BeastQuake on Mon, 06 November 2017, 21:07:24
Post by: yuktsi on Tue, 07 November 2017, 00:56:33
Hey Yuktsi, you still thinking of doing a second round of the 910CE's? I think I remember you mentioning that you were considering doing a second round around November?Nothing concrete yet. I’m thinking of doing polycarbonate 910CE instead. Let’s see how this round goes.
Sent from my iPhone using Tapatalk
Post by: smittysteve on Tue, 07 November 2017, 00:58:01
Hey Yuktsi, you still thinking of doing a second round of the 910CE's? I think I remember you mentioning that you were considering doing a second round around November?Nothing concrete yet. I’m thinking of doing polycarbonate 910CE instead. Let’s see how this round goes.
Sent from my iPhone using Tapatalk
Holy balls, yes yes yes yes YES please!!!!
Post by: ewwgin on Tue, 07 November 2017, 02:14:27
YES PLSSSSSSHey Yuktsi, you still thinking of doing a second round of the 910CE's? I think I remember you mentioning that you were considering doing a second round around November?Nothing concrete yet. I’m thinking of doing polycarbonate 910CE instead. Let’s see how this round goes.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Post by: oatmicro on Tue, 07 November 2017, 04:41:26
HOT DAMN
I’m thinking of doing polycarbonate 910CE instead
Post by: pr0ximity on Tue, 07 November 2017, 05:07:25
Hey Yuktsi, you still thinking of doing a second round of the 910CE's? I think I remember you mentioning that you were considering doing a second round around November?Nothing concrete yet. I’m thinking of doing polycarbonate 910CE instead. Let’s see how this round goes.
Sent from my iPhone using Tapatalk
(https://m.popkey.co/733b65/kdR7j_s-200x150.gif)
Post by: sairex on Tue, 07 November 2017, 13:19:30
Post by: Shoah on Tue, 07 November 2017, 13:21:05
yuktsi can you give an update to your other projects? It's been more than a month without communication. Thanks.Yuktsi posted an update yesterday and said he is going to update us soon again..
Post by: xondat on Tue, 07 November 2017, 13:26:55
yuktsi can you give an update to your other projects? It's been more than a month without communication. Thanks.Yuktsi posted an update yesterday and said he is going to update us soon again..
Probably means Tris and 910.
Post by: Shoah on Tue, 07 November 2017, 13:27:51
yuktsi can you give an update to your other projects? It's been more than a month without communication. Thanks.Yuktsi posted an update yesterday and said he is going to update us soon again..
Probably means Tris and 910.
Ahh you might be right, I assumed he meant 910 cuz hes posting in that thread.
Post by: iArson on Tue, 07 November 2017, 14:45:26
Post by: cmd on Tue, 07 November 2017, 20:18:18
Wat
Post by: xondat on Tue, 07 November 2017, 20:19:52
Posting in threads asking about updates on other projects?
Wat
He hasn't posted in Tris for almost 2 months and people are still asking for updates etc...
I agree that people shouldn't have to post in other threads, but if that's what it takes then :shrug:
Post by: darkslay3r on Wed, 08 November 2017, 02:45:06
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)DSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)DSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)DSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Post by: vegs on Wed, 08 November 2017, 03:05:38
Show Image
Show Image
Show Image
Show Image
For anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
:ahegao:
Post by: ihalatch on Wed, 08 November 2017, 03:07:36
Show Image
Show Image
Show Image
Show Image
For anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
When will this GB start? Any links?
Post by: oatmicro on Wed, 08 November 2017, 03:09:48
For anyone who curious about 910 Poly, here's the album :p
Always curious how someone got something that didn't open for the GB.
Private deals made me so jealous. :'(
Post by: ihalatch on Wed, 08 November 2017, 03:11:09
For anyone who curious about 910 Poly, here's the album :p
Always curious how someone got something that didn't open for the GB.
Private deals made me so jealous. :'(
Pretty depressing isn't it?
Post by: darkslay3r on Wed, 08 November 2017, 03:14:00
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
Post by: ihalatch on Wed, 08 November 2017, 03:17:52
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
Post by: Shoah on Wed, 08 November 2017, 03:18:47
910 ce was 67sec
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
Post by: ihalatch on Wed, 08 November 2017, 03:19:51
910 ce was 67sec
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
I'll never own one I know it!
Post by: Shoah on Wed, 08 November 2017, 03:22:38
I did it on mobile in 69sec and got in later when someone dropped out. You can do it, I believe in you!910 ce was 67sec
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
I'll never own one I know it!
Post by: ihalatch on Wed, 08 November 2017, 03:42:24
I did it on mobile in 69sec and got in later when someone dropped out. You can do it, I believe in you!910 ce was 67sec
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
I'll never own one I know it!
The real problem I think are the people who buy it only to sell it later doubling the price. I guess there is nothing wrong you can finance some other projects. This is why, in my opinion, all highly desirable GBs should be carried out as a raffle.
Post by: pr0ximity on Wed, 08 November 2017, 05:29:30
Show Image
Show Image
Show Image
Show Image
For anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Post by: darkslay3r on Wed, 08 November 2017, 06:17:30
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Brass plate bro, haven’t assembled it yet hahaha
Just put the switch without solder
Photo purpose lol
Post by: pr0ximity on Wed, 08 November 2017, 08:36:01
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Brass plate bro, haven’t assembled it yet hahaha
Just put the switch without solder
Photo purpose lol
Ah, poly plate is a requirement! Looks great though, I must have one.
Post by: darkslay3r on Wed, 08 November 2017, 08:44:28
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Brass plate bro, haven’t assembled it yet hahaha
Just put the switch without solder
Photo purpose lol
Ah, poly plate is a requirement! Looks great though, I must have one.
I will use linear so i pick brass plate hahaha, but poly plate will great with clicky switch !
Sent from my iPhone using Tapatalk
Post by: SBN on Wed, 08 November 2017, 08:58:53
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Brass plate bro, haven’t assembled it yet hahaha
Just put the switch without solder
Photo purpose lol
Ah, poly plate is a requirement! Looks great though, I must have one.
I will use linear so i pick brass plate hahaha, but poly plate will great with clicky switch !
Sent from my iPhone using Tapatalk
I feel we are getting a little off topic here, but why would you pick a brass plate for linear and a polycarbonate one for clicky switches?
Is that based on sound, feeling or something else?
Post by: darkslay3r on Wed, 08 November 2017, 09:03:00
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Brass plate bro, haven’t assembled it yet hahaha
Just put the switch without solder
Photo purpose lol
Ah, poly plate is a requirement! Looks great though, I must have one.
I will use linear so i pick brass plate hahaha, but poly plate will great with clicky switch !
Sent from my iPhone using Tapatalk
I feel we are getting a little off topic here, but why would you pick a brass plate for linear and a polycarbonate one for clicky switches?
Is that based on sound, feeling or something else?
Personally the feeling and sound
Sent from my iPhone using Tapatalk
Post by: sairex on Wed, 08 November 2017, 15:00:35
Posting in threads asking about updates on other projects?
Wat
He hasn't posted in Tris for almost 2 months and people are still asking for updates etc...
I agree that people shouldn't have to post in other threads, but if that's what it takes then :shrug:
I'm just bringing awareness to the situation. For whatever reason, he hasn't posted an update after various people have asked for one for more than a month, yet he has added more than one update to this thread in the same time.
Post by: fublamchu on Mon, 20 November 2017, 20:48:20
Sent from my iPhone using Tapatalk
Post by: yuktsi on Tue, 21 November 2017, 05:39:42
It's not likely that the housings can be done by week 10, delivery will be postponed to week 12.
(https://i.imgur.com/X98XLxL.jpg)
Post by: darkslay3r on Tue, 21 November 2017, 05:41:38
**Week 8 update**
It's not likely that the housings can be done by week 10, delivery will be postponed to week 12.Show Image(https://i.imgur.com/X98XLxL.jpg)
Yeah
Sent from my iPhone using Tapatalk
Post by: Puddsy on Tue, 21 November 2017, 12:10:24
**Week 8 update**
It's not likely that the housings can be done by week 10, delivery will be postponed to week 12.Show Image(https://i.imgur.com/X98XLxL.jpg)
thanks pal
Post by: romevi on Thu, 23 November 2017, 00:44:24
**Week 8 update**
It's not likely that the housings can be done by week 10, delivery will be postponed to week 12.Show Image(https://i.imgur.com/X98XLxL.jpg)
Thanks, yuktsi.
Post by: Zackfoo on Mon, 27 November 2017, 10:31:33
Sent from my SM-G935F using Tapatalk
Post by: darkslay3r on Mon, 27 November 2017, 10:34:13
Err..... So..... Kinda posted it first at 910 thread. My bad, didn't notice that this is the actual CE. So yeah, spray painted 910 CE. Drool pls ladies and gentlemen. Your drools makes me happy.Show Image(https://uploads.tapatalk-cdn.com/20171127/3836fbce4be8e13a813c9c66cfc19aed.jpg)
Sent from my SM-G935F using Tapatalk
See you tmr bro
Sent from my iPhone using Tapatalk
Post by: Ponkan on Mon, 27 November 2017, 13:23:39
Post by: Puddsy on Mon, 27 November 2017, 15:08:33
Very unlikely but anyone giving out their spots?
yutski generally doesn't allow slot transfers as far as i know
wait until these ship
Post by: trexous on Tue, 28 November 2017, 12:53:20
Err..... So..... Kinda posted it first at 910 thread. My bad, didn't notice that this is the actual CE. So yeah, spray painted 910 CE. Drool pls ladies and gentlemen. Your drools makes me happy.Show Image(https://uploads.tapatalk-cdn.com/20171127/3836fbce4be8e13a813c9c66cfc19aed.jpg)
Sent from my SM-G935F using Tapatalk
did you do it yourself?
Post by: Ponkan on Tue, 28 November 2017, 13:29:35
Very unlikely but anyone giving out their spots?
yutski generally doesn't allow slot transfers as far as i know
wait until these ship
Oh ok, thanks!
Post by: xondat on Tue, 28 November 2017, 13:50:20
Post by: Puddsy on Tue, 28 November 2017, 16:06:57
I transferred mine a bit ago, and I know a couple others that have. It's only between friends generally :blank:
:dolphin:
Post by: xondat on Tue, 28 November 2017, 16:08:34
I transferred mine a bit ago, and I know a couple others that have. It's only between friends generally :blank:
:dolphin:
:dolphinforretail:
Post by: Puddsy on Tue, 28 November 2017, 16:16:31
I transferred mine a bit ago, and I know a couple others that have. It's only between friends generally :blank:
:dolphin:
:dolphinforretail:
clearly my joke has missed
Post by: Zackfoo on Thu, 30 November 2017, 10:46:03
Yup yup. Kinda. By Sam's recommendation since he knows a guy. I think he is going to make a few extras with either this painting or powder coating. Just to be different. So like special unit you see.Err..... So..... Kinda posted it first at 910 thread. My bad, didn't notice that this is the actual CE. So yeah, spray painted 910 CE. Drool pls ladies and gentlemen. Your drools makes me happy.Show Image(https://uploads.tapatalk-cdn.com/20171127/3836fbce4be8e13a813c9c66cfc19aed.jpg)
Sent from my SM-G935F using Tapatalk
did you do it yourself?
Sent from my SM-G935F using Tapatalk
Post by: Mr_BeastQuake on Thu, 30 November 2017, 13:46:48
Post by: Mr_BeastQuake on Sat, 09 December 2017, 18:40:03
Post by: Meika on Sun, 10 December 2017, 10:34:37
(https://i.imgur.com/XT7EAME.jpg)
(https://i.imgur.com/RpW5mWu.jpg)
(https://i.imgur.com/aYPsyIi.jpg)
(https://i.imgur.com/rMIYen4.jpg)
(https://i.imgur.com/ZCpQrN1.jpg)
Post by: theillumedpanda on Sun, 10 December 2017, 10:54:44
Post by: Meika on Sun, 10 December 2017, 11:03:52
The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
Post by: avid on Sun, 10 December 2017, 11:57:50
Have shipping started already?
Post by: theillumedpanda on Sun, 10 December 2017, 12:01:29
I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
Post by: SixtyLife on Sun, 10 December 2017, 16:16:40
my first custom... Yey!Show Image(https://i.imgur.com/XT7EAME.jpg)Show Image(https://i.imgur.com/RpW5mWu.jpg)Show Image(https://i.imgur.com/aYPsyIi.jpg)Show Image(https://i.imgur.com/rMIYen4.jpg)Show Image(https://i.imgur.com/ZCpQrN1.jpg)
I love this!!! can't wait to see the rest!
Post by: Sissy on Sun, 10 December 2017, 17:42:13
my first custom... Yey!Amazing shots and pure perfection of a keyboard.Show Image(https://i.imgur.com/XT7EAME.jpg)Show Image(https://i.imgur.com/RpW5mWu.jpg)Show Image(https://i.imgur.com/aYPsyIi.jpg)Show Image(https://i.imgur.com/rMIYen4.jpg)Show Image(https://i.imgur.com/ZCpQrN1.jpg)
Post by: lunr on Sun, 10 December 2017, 20:37:32
Post by: amnesia0287 on Sun, 10 December 2017, 22:25:31
I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
I'm just hoping I can get a polycarb one. i think i saw they are even gonna make the pcb translucent :O.
Post by: captainish on Mon, 11 December 2017, 02:29:49
my first custom... Yey!Show Image(https://i.imgur.com/XT7EAME.jpg)Show Image(https://i.imgur.com/RpW5mWu.jpg)Show Image(https://i.imgur.com/aYPsyIi.jpg)Show Image(https://i.imgur.com/rMIYen4.jpg)Show Image(https://i.imgur.com/ZCpQrN1.jpg)
Looks amazing! Glad I went with pink.
Post by: Mr_BeastQuake on Mon, 11 December 2017, 02:31:22
my first custom... Yey!Show Image(https://i.imgur.com/XT7EAME.jpg)Show Image(https://i.imgur.com/RpW5mWu.jpg)Show Image(https://i.imgur.com/aYPsyIi.jpg)Show Image(https://i.imgur.com/rMIYen4.jpg)Show Image(https://i.imgur.com/ZCpQrN1.jpg)
najs pics, i like to zoom in and stare at the anode in the first one
Post by: theillumedpanda on Thu, 14 December 2017, 03:24:58
Do you have a source for that? That‘d be awesome.I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
I'm just hoping I can get a polycarb one. i think i saw they are even gonna make the pcb translucent :O.
Post by: Krytone on Thu, 14 December 2017, 03:35:11
Here you go.Do you have a source for that? That‘d be awesome.I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
I'm just hoping I can get a polycarb one. i think i saw they are even gonna make the pcb translucent :O.
https://www.instagram.com/p/BbMfU1pFmKT/
Post by: amnesia0287 on Thu, 14 December 2017, 06:23:36
Here you go.Do you have a source for that? That‘d be awesome.I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
I'm just hoping I can get a polycarb one. i think i saw they are even gonna make the pcb translucent :O.
https://www.instagram.com/p/BbMfU1pFmKT/
Yeah that... drool.
Post by: fublamchu on Mon, 18 December 2017, 10:16:20
Post by: FoC_Tow on Mon, 18 December 2017, 10:27:42
Its green O_O
Trans green might look kinda nice tbh xD
Didn’t expect to ever say a green pcb looks good again but I guess this did it
Post by: Mr_BeastQuake on Thu, 21 December 2017, 11:01:53
Any updates by chance?
yuktsi had mentioned 1/3 of machining is left. 2-3 weeks out. i'm so thirsty... very excite.
Post by: Sissy on Mon, 01 January 2018, 20:53:31
Post by: yuktsi on Tue, 02 January 2018, 05:45:43
Happy new year guys. The machining for the all the parts is completed. Aluminum parts are being anodized at this moment. I was informed that I may collect the anodized parts next week.
Post by: darkslay3r on Tue, 02 January 2018, 11:30:00
Weeks 14 update
Happy new year guys. The machining for the all the parts is completed. Aluminum parts are being anodized at this moment. I was informed that I may collect the anodized parts next week.
I considered it as new year present
Sent from my iPhone using Tapatalk
Post by: oatmicro on Tue, 02 January 2018, 12:48:02
Also Happy New Year :)
Post by: lunr on Tue, 16 January 2018, 23:45:11
Post by: theillumedpanda on Wed, 17 January 2018, 17:44:57
Post by: yuktsi on Sun, 21 January 2018, 05:49:50
I've received some photos from the anodizing guy for color pink, purple and black. Gonna pick them up tomorrow and see how it goes.
For those who can't wait, send me a PM and I will reply with some photos.
Enjoy the rest of the weekend, cheers.
Post by: yuktsi on Sun, 21 January 2018, 05:50:51
I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
Post by: darkslay3r on Sun, 21 January 2018, 08:42:31
Sent from my iPhone using Tapatalk
Post by: reconsiderit on Mon, 22 January 2018, 21:02:33
A small GB for the polycarb 910? How many spots do you expect to have?I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
PM'd about it.
Post by: dubious on Tue, 23 January 2018, 13:29:33
A small GB for the polycarb 910? How many spots do you expect to have?I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
PM'd about it.
something tells me it's for the translucent PCB, but man can dream
Post by: romevi on Tue, 23 January 2018, 13:29:54
Post by: brighenne on Tue, 23 January 2018, 15:35:10
Any extras?
ur mam has extras.
Post by: romevi on Tue, 23 January 2018, 20:56:15
Any extras?
ur mam has extras.
Ha ha.
#e-rekt
Post by: zekkin on Wed, 24 January 2018, 10:13:32
I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
Sent PM.
Post by: aznreaper on Wed, 24 January 2018, 10:46:02
Post by: romevi on Wed, 24 January 2018, 15:20:07
I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
Guess I'm not a friend. :'(
Post by: Mr_BeastQuake on Wed, 24 January 2018, 15:22:59
I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
Guess I'm not a friend. :'(
Possibly immediate regret from yuktsi after using the words: "Send me a PM if you are interested."
Post by: yuktsi on Sun, 28 January 2018, 08:27:52
Sent from my iPhone using Tapatalk
Post by: yuktsi on Sun, 28 January 2018, 08:49:28
Post by: Shoah on Sun, 28 January 2018, 08:51:11
Show Image(https://i.imgur.com/93n3FJK.jpg)
Looks amazing, can't wait!
Do you have an estimate when you will start shipping them?
Post by: nickysan92 on Sun, 28 January 2018, 08:52:19
Post by: Sissy on Sun, 28 January 2018, 08:55:40
Daaaaamn nice, whats the middle color?Show Image(https://i.imgur.com/93n3FJK.jpg)
still wish I coulda got it in purple but happy I'm getting one at all.
Post by: darkslay3r on Sun, 28 January 2018, 08:59:44
Sent from my iPhone using Tapatalk
Post by: futurecrime on Sun, 28 January 2018, 09:03:24
Post by: dblack on Sun, 28 January 2018, 09:48:19
So excited! :)Show Image(https://i.imgur.com/93n3FJK.jpg)
Post by: kawasaki161 on Sun, 28 January 2018, 10:51:37
Post by: Mr_BeastQuake on Sun, 28 January 2018, 11:07:01
Daaaaamn nice, whats the middle color?
still wish I coulda got it in purple but happy I'm getting one at all.
‘Twould be grey, no?
Post by: funderburker on Sun, 28 January 2018, 11:38:44
Show Image(https://i.imgur.com/93n3FJK.jpg)
Truly an amazing photo! Quite sad I haven't joined the GB.
(https://media.giphy.com/media/bVoflcc4kidaM/giphy.gif)
Post by: Unforgivable on Sun, 28 January 2018, 23:40:57
Post by: yuktsi on Mon, 29 January 2018, 01:09:29
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
Post by: kawasaki161 on Mon, 29 January 2018, 01:11:30
Show Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
Post by: amnesia0287 on Mon, 29 January 2018, 01:16:47
Show Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
I'd still take that pink over the red. looks so good. sadness
Post by: Puddsy on Mon, 29 January 2018, 01:34:03
Show Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
Yuktsi has done a very good job fostering the SEA community, although I agree more colors is always a plus. Don't really blame him though.
Post by: darkslay3r on Mon, 29 January 2018, 01:38:55
Show Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
What’s DW stand for ?
Sent from my iPhone using Tapatalk
Post by: Shoah on Mon, 29 January 2018, 01:40:05
Don‘t worryShow Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
What’s DW stand for ?
Sent from my iPhone using Tapatalk
Post by: ___q on Mon, 29 January 2018, 01:41:20
Anodising is good except for the grey ones, which turn out a lot lighter than what I expected.
While the grey is lighter than expected, the resulting color is very nice!
Very excited about this one, thanks for all of your hard work.
Post by: dblack on Mon, 29 January 2018, 01:45:30
**Week 17 update**
Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected.
I'm personally quite happy with that shade of grey. Looking forward to the board.
Post by: Sissy on Mon, 29 January 2018, 01:45:58
**Week 17 update**Thanks for the update. I'm in Australia so I'm always expecting super high shipping anyway so whats a few more dollars.
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
Post by: darkslay3r on Mon, 29 January 2018, 01:47:52
Don‘t worryShow Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
What’s DW stand for ?
Sent from my iPhone using Tapatalk
ohh okay, actually i was held that red color, it looks gorgeous but still i prefer pink
Post by: yuktsi on Mon, 29 January 2018, 02:14:52
Post by: catweewee on Mon, 29 January 2018, 02:20:11
**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
I can vouch for this. The currency shift has affected my own SINGA gb, but fortunately only on shipping invoices. From 50 USD to the states to 70 USD now for the same weight.
:(
Post by: kawasaki161 on Mon, 29 January 2018, 03:45:54
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
This is indeed quite sad, because a similar change occured to the exchange rate from Euro to USD, where USD was worth more when I paid the first invoice. If I paid the same amount of Euros today the difference in the amount of USD would be over 45, just through the exchange rate difference.
However I don't care, just hit me with that invoice if it means I get my board earlier :thumb:
Post by: nickysan92 on Mon, 29 January 2018, 04:40:02
Post by: futurecrime on Mon, 29 January 2018, 04:44:26
**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
No worries about the price increase, **** happens. Out of curiosity, what made you decide to get the brass plates milled rather than laser cut?
Post by: catweewee on Mon, 29 January 2018, 04:55:04
**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
No worries about the price increase, **** happens. Out of curiosity, what made you decide to get the brass plates milled rather than laser cut?
Milling plates give cleaner cuts and you avoid the possibility of laser burn marks. Theres quite a noticeable difference.
Post by: futurecrime on Mon, 29 January 2018, 05:18:29
**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
No worries about the price increase, **** happens. Out of curiosity, what made you decide to get the brass plates milled rather than laser cut?
Milling plates give cleaner cuts and you avoid the possibility of laser burn marks. Theres quite a noticeable difference.
That's what I assumed but a quick Google seemed to be saying the opposite, which confused me. Good to have that cleared up, cheers.
Post by: oatmicro on Mon, 29 January 2018, 06:14:00
And I hope everyone will understand that as well.
Post by: Mr_BeastQuake on Mon, 29 January 2018, 06:25:22
**Week 17 update**
Everything seems fine, no dents or any scratches.
Praise Jesus
Post by: finalarcadia on Mon, 29 January 2018, 07:01:31
Don't think anyone will mind paying a little extra for this great board. Good job Yuktsi.Sent from my SM-G950U using Tapatalk
Post by: LDobler on Mon, 29 January 2018, 07:03:48
Other than that paying more is fine with me
Post by: darkslay3r on Mon, 29 January 2018, 10:13:29
Post by: ihalatch on Tue, 30 January 2018, 19:08:47
Post by: Puddsy on Tue, 30 January 2018, 19:14:30
Post by: yuktsi on Fri, 02 February 2018, 05:37:48
How does this grey shade compare to the grey shade of the TRIS numpad? :xIt's actually lighter than the Tris grey, I will see what I can do with your units.
Other than that paying more is fine with me
Post by: captainish on Sat, 03 February 2018, 16:07:36
Post by: SixtyLife on Sat, 03 February 2018, 17:15:22
Post by: Mr_BeastQuake on Sun, 04 February 2018, 13:33:51
Post by: Puddsy on Sun, 04 February 2018, 14:33:10
Original plan was to use Dolch with grey case. Am going to use GMK Originative instead since grey turned out a bit lighter. It will also be my first Zilent keyboard. Let us pray it ships before Lunar New Year or face the wait.
dolch would probably look better with the lighter grey, but if you have both just try em both
Post by: oisw on Tue, 06 February 2018, 17:19:26
Post by: yuktsi on Wed, 07 February 2018, 07:12:50
Thank you guys for understanding the increase in cost. Cheers.
Post by: Shoah on Wed, 07 February 2018, 07:14:17
Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.Great to hear! Im extremely excited. :D
Post by: yuktsi on Wed, 07 February 2018, 07:18:22
Me too! I have about 1/3 more to check, hope not dents like the last round.Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.Great to hear! Im extremely excited. :D
Post by: Shoah on Wed, 07 February 2018, 07:19:15
Fingers crossed. 🤞🏻Me too! I have about 1/3 more to check, hope not dents like the last round.Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.Great to hear! Im extremely excited. :D
Post by: dblack on Wed, 07 February 2018, 07:23:51
Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.Ayy awesome
Thank you guys for understanding the increase in cost. Cheers.
Post by: finalarcadia on Wed, 07 February 2018, 07:26:36
Sent from my SM-G950U using Tapatalk
Post by: futurecrime on Wed, 07 February 2018, 07:54:17
Post by: Pragmatizm on Wed, 07 February 2018, 10:25:33
Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.
Thank you guys for understanding the increase in cost. Cheers.
I havent gotten an invoice for the additional charges. Have they gone out?
Post by: Shoah on Wed, 07 February 2018, 10:26:56
I haven't either, hes probably just not finished yet.Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.
Thank you guys for understanding the increase in cost. Cheers.
I havent gotten an invoice for the additional charges. Have they gone out?
Post by: dblack on Wed, 07 February 2018, 11:42:40
I don't think any have gone out, probs gonna finish checking the boards like he said.I haven't either, hes probably just not finished yet.Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.
Thank you guys for understanding the increase in cost. Cheers.
I havent gotten an invoice for the additional charges. Have they gone out?
Post by: darkslay3r on Wed, 07 February 2018, 11:45:29
Sent from my iPhone using Tapatalk
Post by: avid on Wed, 07 February 2018, 13:34:24
Post by: breckstar on Thu, 08 February 2018, 09:20:03
Post by: yuktsi on Thu, 08 February 2018, 09:25:28
CE Grey vs R1 Grey
(https://i.imgur.com/6s3aNqul.jpg)
Some of the packed boards.
(https://i.imgur.com/CKhoB39l.jpg)
I am having a day off tomorrow, will invoice more as I pack. My target is to having everything shipped before the 16th Feb, if not most. I'm going to take more photos tomorrow when there's natural sunlight, especially for the grey.
Cheers.
Post by: Sissy on Thu, 08 February 2018, 09:28:09
Post by: yuktsi on Thu, 08 February 2018, 09:31:30
I really like the lighter Grey, it looks good with the brass plate.It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.
Post by: Mr_BeastQuake on Thu, 08 February 2018, 09:31:38
Post by: Sissy on Thu, 08 February 2018, 09:36:27
Titanium is a colour I like and if True I'm super excited to see in person when I get mine.I really like the lighter Grey, it looks good with the brass plate.It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.
Post by: vtachkov on Thu, 08 February 2018, 09:42:44
Post by: Mr_BeastQuake on Thu, 08 February 2018, 09:44:15
I really like the lighter Grey, it looks good with the brass plate.It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.
Missed this in my previous comment. This is indeed interesting.
Post by: lunr on Thu, 08 February 2018, 10:13:20
I really like the lighter Grey, it looks good with the brass plate.
Same. I actually quite like the color now. Works well with OG keycap colours.
Post by: Puddsy on Thu, 08 February 2018, 16:08:51
Post by: vegs on Fri, 09 February 2018, 04:57:41
Post by: Mr_BeastQuake on Sat, 10 February 2018, 11:25:21
Post by: yuktsi on Sun, 11 February 2018, 03:53:47
The color is pretty close to the titanium clip on my pen.
Post by: dgneo on Sun, 11 February 2018, 07:38:43
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
beautiful
Post by: Mr_BeastQuake on Sun, 11 February 2018, 10:19:48
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
yess... Yessss.... YEEESSSS.
Also nice pen Yuktsi. Danks for photo
Post by: Shoah on Sun, 11 February 2018, 10:52:00
Thats silver tho right? Not the grey one?Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Post by: Mr_BeastQuake on Sun, 11 February 2018, 11:13:15
Thats silver tho right? Not the grey one?Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
There was no silver option. This is the grey one that was stated came out looking like titanium. Thus, comparison to titanium pen.
Post by: darkslay3r on Sun, 11 February 2018, 11:14:17
Thats silver tho right? Not the grey one?Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
There was no silver option. This is the grey one that was stated came out looking like titanium. Thus, comparison to titanium pen.
There is no silver option but i believe someone will have it
Sent from my iPhone using Tapatalk
Post by: Mr_BeastQuake on Sun, 11 February 2018, 11:18:01
Thats silver tho right? Not the grey one?Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
There was no silver option. This is the grey one that was stated came out looking like titanium. Thus, comparison to titanium pen.
There is no silver option but i believe someone will have it
Sent from my iPhone using Tapatalk
There’s always some options that weren’t advertised but for clarity’s sake, that photo is of the widely available grey option and not silver.
Post by: romevi on Sun, 11 February 2018, 18:24:58
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Aww, yes. Ti2 Techliner bros. :cool:
Post by: cmd on Sun, 11 February 2018, 21:02:26
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Coincidence that 69 is used on the packaging? Please explain Sam
Post by: Puddsy on Sun, 11 February 2018, 21:17:12
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
nice
Post by: funderburker on Mon, 12 February 2018, 00:49:45
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Oh, that's hot!
Post by: yonghf on Mon, 12 February 2018, 02:07:16
Post by: darkslay3r on Mon, 12 February 2018, 02:08:49
Any news on SEA orders? Haven't gotten an invoice.
I thought SEA will be last shipment since it’s nearest and fast to deliver
Sent from my iPhone using Tapatalk
Post by: yonghf on Mon, 12 February 2018, 02:14:12
I thought SEA will be last shipment since it’s nearest and fast to deliver
Sent from my iPhone using Tapatalk
That makes sense but I'm just asking for an update with CNY coming up. He mentioned via PM that he'll try to ship everything out by CNY.
Post by: darkslay3r on Mon, 12 February 2018, 02:15:31
I thought SEA will be last shipment since it’s nearest and fast to deliver
Sent from my iPhone using Tapatalk
That makes sense but I'm just asking for an update with CNY coming up. He mentioned via PM that he'll try to ship everything out by CNY.
May i know which nation are you ?
Sent from my iPhone using Tapatalk
Post by: yonghf on Mon, 12 February 2018, 02:17:03
I thought SEA will be last shipment since it’s nearest and fast to deliver
Sent from my iPhone using Tapatalk
That makes sense but I'm just asking for an update with CNY coming up. He mentioned via PM that he'll try to ship everything out by CNY.
May i know which nation are you ?
Sent from my iPhone using Tapatalk
SG
Post by: Sissy on Mon, 12 February 2018, 03:36:18
Post by: lunr on Mon, 12 February 2018, 07:33:51
Post by: cmd on Mon, 12 February 2018, 09:36:29
I'm Australian so I guess I am lumped in with all you guys lol.
put another shrimp on the barbie
Post by: romevi on Mon, 12 February 2018, 09:46:24
I'm Australian so I guess I am lumped in with all you guys lol.
put another shrimp on the barbie
That's a lovely accent you have there!
Post by: DanB on Mon, 12 February 2018, 21:44:37
Sorry for the delay, but for some reason, Paypal didn't send me an email, and I was bad about checking this thread.
Post by: captainish on Mon, 12 February 2018, 22:56:20
Post by: yuktsi on Tue, 13 February 2018, 00:03:06
(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Post by: Puddsy on Tue, 13 February 2018, 01:15:43
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
pink is a lifestyle
Post by: darkslay3r on Tue, 13 February 2018, 01:20:51
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Best color ever
Sent from my iPhone using Tapatalk
Post by: vegs on Tue, 13 February 2018, 03:18:22
Post by: brighenne on Tue, 13 February 2018, 10:11:53
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Rapha makes the best kit :thumb:
Post by: megaforce on Tue, 13 February 2018, 11:25:44
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
:-*
Post by: reconsiderit on Tue, 13 February 2018, 22:30:29
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Rapha makes the best kit :thumb:
They have a small shop in SF that's always fun to visit. There's always something interesting on display and the coffee is pretty good.
Is that the same plate that will ship with the poly 910?
Post by: funderburker on Wed, 14 February 2018, 01:41:50
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
This is sooo nice. Is that close to the real thing or a bit edited? Love the matte finish, goes so well with the color. Is there any possibility to get this in Hi Res? Would make an absolutely gorgeous desktop wallpaper.
Post by: vtachkov on Wed, 14 February 2018, 09:41:55
Post by: yuktsi on Thu, 15 February 2018, 07:50:45
Happy Lunar New Year to those celebrating :p
Post by: Mr_BeastQuake on Thu, 15 February 2018, 07:59:45
Hi guys, I've managed to have around 50% of the orders shipped yesterday. Tracking has been updated to PayPal. I will be away for the next few days and will continue to ship on the 19th or 20th. Should have another 25% of the orders shipped by next week. There're around 10+ boards that need to be re-anodized. There are no dents, so it won't take too long for the rework.
Happy Lunar New Year to those celebrating :p
Well, shoot. Hoping I'm not in the "needs re-ano" bunch, but am also very happy the issues are not dent/scratch related. A happy Lunar New Year to you sir.
Post by: yuktsi on Thu, 15 February 2018, 08:03:29
I've actually put your unit aside. For some reason, I thought you are in the "need to ship you more than 1 board" bunch, will have yours sorted by next week.Hi guys, I've managed to have around 50% of the orders shipped yesterday. Tracking has been updated to PayPal. I will be away for the next few days and will continue to ship on the 19th or 20th. Should have another 25% of the orders shipped by next week. There're around 10+ boards that need to be re-anodized. There are no dents, so it won't take too long for the rework.
Happy Lunar New Year to those celebrating :p
Well, shoot. Hoping I'm not in the "needs re-ano" bunch, but am also very happy the issues are not dent/scratch related. A happy Lunar New Year to you sir.
Cheers.
Post by: Mr_BeastQuake on Thu, 15 February 2018, 08:12:27
[attachimg=1]
Post by: LDobler on Thu, 15 February 2018, 08:13:21
Post by: lunr on Thu, 15 February 2018, 08:14:42
Post by: kawasaki161 on Thu, 15 February 2018, 08:24:43
Is there a list of names from this GB that their units needs to be fixed? I hope mine isn't part of that "re-ano" bunch too.
Seconded, though knowing my luck I'm probably part of that group.
This is a long shot, but if I am, is there a chance I can ask for a color change if it's reano'd anyways?
Post by: yuktsi on Thu, 15 February 2018, 08:50:20
Is there a list of names from this GB that their units needs to be fixed? I hope mine isn't part of that "re-ano" bunch too.That's actually a good idea. Thank you. I will probably have a list made when I have the rest shipped out.
I don't think that is this possible. These 'defected' ones are just either the top or bottom. I am sending both top and bottom back so that they produce a closer color match.Is there a list of names from this GB that their units needs to be fixed? I hope mine isn't part of that "re-ano" bunch too.
Seconded, though knowing my luck I'm probably part of that group.
This is a long shot, but if I am, is there a chance I can ask for a color change if it's reano'd anyways?
Post by: yuktsi on Thu, 15 February 2018, 08:53:53
Rapha makes the best kit :thumb:Expensive though :(
They have a small shop in SF that's always fun to visit. There's always something interesting on display and the coffee is pretty good.I wish we have a Rapha clubhouse here in Kuala Lumpur. And yes, that will be the plate for the poly.
Is that the same plate that will ship with the poly 910?
Post by: glack23 on Thu, 15 February 2018, 08:54:23
Sent from my Pixel using Tapatalk
Post by: yuktsi on Thu, 15 February 2018, 09:11:16
Surprised, u reply so quickly especially after the reunion dinner :)Haha a little bored with the relatives around.
Sent from my Pixel using Tapatalk
Post by: kawasaki161 on Thu, 15 February 2018, 09:28:58
I don't think that is this possible. These 'defected' ones are just either the top or bottom. I am sending both top and bottom back so that they produce a closer color match.
Figured as much, thanks for the reply though.
Post by: kmba on Thu, 15 February 2018, 09:56:58
Post by: SixtyLife on Thu, 15 February 2018, 13:50:08
thanks
Post by: dblack on Thu, 15 February 2018, 14:36:44
hey yuktsi, how do I use the tracking number listed on paypal? didn't work with track-trace or any shippers I could think of and google was no help.Also having this issue ha
thanks
Post by: dblack on Thu, 15 February 2018, 14:39:16
hey yuktsi, how do I use the tracking number listed on paypal? didn't work with track-trace or any shippers I could think of and google was no help.Also having this issue ha
thanks
hmm why did tapatalk send this reply twice lol
Post by: Puddsy on Thu, 15 February 2018, 17:04:16
hey yuktsi, how do I use the tracking number listed on paypal? didn't work with track-trace or any shippers I could think of and google was no help.
thanks
try putting it into 17track
Post by: dblack on Thu, 15 February 2018, 17:08:02
hey yuktsi, how do I use the tracking number listed on paypal? didn't work with track-trace or any shippers I could think of and google was no help.
thanks
try putting it into 17track
doesnt work, might just be that the systems need a few days to update
Post by: DanB on Fri, 16 February 2018, 11:28:07
Post by: Puddsy on Sat, 17 February 2018, 14:27:20
Post by: yuktsi on Tue, 20 February 2018, 07:27:41
Cheers.
Post by: yuktsi on Tue, 20 February 2018, 07:30:22
Yuktsi, I'm still waiting a reply from you on my PM.Sorry, I must have missed yours. Replied btw.
Post by: crtexcnndrm99 on Tue, 20 February 2018, 09:41:08
Sent from my iPhone using Tapatalk
Post by: romevi on Tue, 20 February 2018, 09:42:13
All US orders were shipped using S.F. Express. I just only got home from my parents' hometown, another round of shipping invoices will be going out tmr.
Cheers.
Thanks, babycakes.
Post by: dblack on Tue, 20 February 2018, 09:42:59
Oof that light grey (titanium) will be hot with a beige set. Another GB I missed it seems :o
Sent from my iPhone using Tapatalk
Thats whats going on mine ;)
Post by: crtexcnndrm99 on Tue, 20 February 2018, 09:47:10
Oof that light grey (titanium) will be hot with a beige set. Another GB I missed it seems :o
Sent from my iPhone using Tapatalk
Thats whats going on mine ;)
You tease. ;)
Sent from my iPhone using Tapatalk
Post by: JubJubCity on Wed, 21 February 2018, 15:35:32
Post by: Pragmatizm on Wed, 21 February 2018, 15:45:44
Post by: dblack on Wed, 21 February 2018, 16:19:30
Has anyone been able to track their order? My tracking number still does not work, even when I try it through SF express.
Working for me but it took a couple of days.
Post by: captainish on Wed, 21 February 2018, 18:15:50
Has anyone been able to track their order? My tracking number still does not work, even when I try it through SF express.
My tracking number isn't showing anything either.
Post by: megaforce on Wed, 21 February 2018, 18:26:15
Post by: fublamchu on Wed, 21 February 2018, 20:04:25
Post by: JubJubCity on Wed, 21 February 2018, 23:45:12
Post by: Sissy on Thu, 22 February 2018, 09:43:50
$150 AUD shipping wont keep me from this keyboard.
Post by: yuktsi on Thu, 22 February 2018, 09:51:38
Late night invoice paid 👌Thank you! Another round of shipping invoices was sent, btw.
$150 AUD shipping wont keep me from this keyboard.
Post by: Mr_BeastQuake on Thu, 22 February 2018, 11:21:51
Post by: Pragmatizm on Thu, 22 February 2018, 11:30:28
Post by: captainish on Thu, 22 February 2018, 20:01:21
Post by: darkslay3r on Thu, 22 February 2018, 20:03:03
Picked up some Zilents for this thing, am aching to get my hands on it. What was the difference in PCB versions? Unicorn 1.1 vs. 1.2 or something?
I believe Unicorn 1.2 is translucent version
Sent from my iPhone using Tapatalk
Post by: Shoah on Fri, 23 February 2018, 03:15:19
Post by: yuktsi on Fri, 23 February 2018, 09:08:13
Is there a list available yet to see which boards have to undergo re-anodizing?I don't have the list yet. But I can confirm that yours will be shipped in a few more days.
Post by: yuktsi on Fri, 23 February 2018, 09:10:26
Picked up some Zilents for this thing, am aching to get my hands on it. What was the difference in PCB versions? Unicorn 1.1 vs. 1.2 or something?For 1.2, I removed the ground plane and wire the grounds instead, so you can kinda see through the PCB.
Post by: Shoah on Fri, 23 February 2018, 09:24:26
Best answer ever, thank you so much, Im hella excited. :DIs there a list available yet to see which boards have to undergo re-anodizing?I don't have the list yet. But I can confirm that yours will be shipped in a few more days.
Post by: yuktsi on Fri, 23 February 2018, 09:25:51
Yeah, the shipping for yours ended up way higher than the amount that I collected. Gonna need to check with another courier like Fedex.Best answer ever, thank you so much, Im hella excited. :DIs there a list available yet to see which boards have to undergo re-anodizing?I don't have the list yet. But I can confirm that yours will be shipped in a few more days.
Post by: DanB on Fri, 23 February 2018, 10:18:48
Post by: romevi on Fri, 23 February 2018, 10:48:26
Tracking still isn't updating for me :(
Same. :(
Post by: yuktsi on Fri, 23 February 2018, 23:54:20
Tracking still isn't updating for me :(http://www.sf-express.com/
Try to trace it here. It's working for me.
Post by: cmd on Sat, 24 February 2018, 12:15:12
Post by: DanB on Sun, 25 February 2018, 14:08:00
Tracking still isn't updating for me :(http://www.sf-express.com/
Try to trace it here. It's working for me.
Working there. I was using 17track before, which is usually reliable.
Post by: Mr_BeastQuake on Mon, 26 February 2018, 20:20:53
Post by: tokidokijake on Mon, 26 February 2018, 20:22:27
i don't see any tracking info on my paypal. Can you verify that it was input there?
Thanks!
Post by: brighenne on Mon, 26 February 2018, 21:38:36
Anybody get theirs yet? Want pics pls
Mine should be here tomorrow.
Post by: Sissy on Mon, 26 February 2018, 21:52:25
Anybody get theirs yet? Want pics plsThis week I hope, I still gotta do all my switches yet.
So what is everyone putting in theirs?
Post by: glack23 on Mon, 26 February 2018, 21:54:22
Yeah I am curious what switch are other putting on theirAnybody get theirs yet? Want pics plsThis week I hope, I still gotta do all my switches yet.
So what is everyone putting in theirs?
Sent from my Pixel using Tapatalk
Post by: Mr_BeastQuake on Mon, 26 February 2018, 22:01:05
Post by: dblack on Tue, 27 February 2018, 01:16:29
Going with 62g vintage blacks. They're all tuned and ready to go.Yeah I am curious what switch are other putting on theirAnybody get theirs yet? Want pics plsThis week I hope, I still gotta do all my switches yet.
So what is everyone putting in theirs?
Sent from my Pixel using Tapatalk
Post by: funderburker on Tue, 27 February 2018, 05:26:17
TLDR;
SUPER EXCITED FOR YOU GUYS/GALS!
Post by: tuba section on Tue, 27 February 2018, 05:57:56
Post by: futurecrime on Tue, 27 February 2018, 06:43:43
Post by: kawasaki161 on Tue, 27 February 2018, 07:44:56
Looks like I was lucky enough to not be too delayed.
Post by: lunr on Tue, 27 February 2018, 09:17:09
Post by: vegs on Tue, 27 February 2018, 09:44:06
Post by: yonghf on Tue, 27 February 2018, 09:55:15
I hope I will get my invoice soon...
Me too. Which colour did you get?
Post by: yuktsi on Tue, 27 February 2018, 12:41:50
The last batch of shipment is going by this week. As for the rework parts, I was told to collect them next week. Will keep everyone posted. A total of 12 units were sent back for re-anodizing, your order is delayed if you still don't receive a shipping invoice by now, sorry.
The first batch should get delivered this week. Fingers crossed. The board is heavy, please be careful while taking it out of the box. PCB is pre-flashed with firmware and keymap. If you have any issue/question, please don't hesitate to pm me here or email me at yuktsi@gmail.com
<3
Post by: vtachkov on Tue, 27 February 2018, 12:47:03
Post by: yuktsi on Tue, 27 February 2018, 13:00:43
Hey Yuktsi, was mine shipped as well? In the US but the invoice hasn't been updated with tracking.Sorry. Just PMed you with the tracking. It seems like your board has landed in the US and in transit to the destination.
Post by: yuktsi on Tue, 27 February 2018, 13:02:59
my tracking is working (080023453773) but it says destination Raleigh and i live in Pittsburgh. Hopefully I just got someone else’s tracking? I’ll find out soon but just wanted to give a heads upSorry, just PMed you the correct one.
Post by: vtachkov on Tue, 27 February 2018, 13:22:00
Hey Yuktsi, was mine shipped as well? In the US but the invoice hasn't been updated with tracking.Sorry. Just PMed you with the tracking. It seems like your board has landed in the US and in transit to the destination.
Got it. Thanks again!
Post by: SixtyLife on Tue, 27 February 2018, 21:38:05
(https://i.imgur.com/RP9VmJ6.jpg)
(https://i.imgur.com/aXL2So1.jpg)
(https://i.imgur.com/JLkS5vP.jpg)
(https://i.imgur.com/BkXLXfH.jpg)
(https://i.imgur.com/1LByZGP.jpg)
(https://i.imgur.com/FnB2JZs.jpg)
these are all greys for comparison:
(https://i.imgur.com/mGpq4by.jpg)
vs X60 (wedge brothers):
(https://i.imgur.com/P5wRIOi.jpg)
(https://i.imgur.com/vn1kHEv.jpg)
(https://i.imgur.com/qGaZKrp.jpg)
Post by: finalarcadia on Tue, 27 February 2018, 21:49:51
Post by: glack23 on Tue, 27 February 2018, 21:54:33
Sent from my Pixel using Tapatalk
Post by: ihalatch on Tue, 27 February 2018, 22:04:17
Post by: dblack on Tue, 27 February 2018, 22:09:13
Post by: kiwi99 on Tue, 27 February 2018, 23:15:35
got mine just now. packaging was perfect. thanks again yuktsi! took some quick pics:Show Image(https://i.imgur.com/RP9VmJ6.jpg)Show Image(https://i.imgur.com/aXL2So1.jpg)Show Image(https://i.imgur.com/JLkS5vP.jpg)Show Image(https://i.imgur.com/BkXLXfH.jpg)Show Image(https://i.imgur.com/1LByZGP.jpg)Show Image(https://i.imgur.com/FnB2JZs.jpg)
these are all greys for comparison:Show Image(https://i.imgur.com/mGpq4by.jpg)
vs X60 (wedge brothers):Show Image(https://i.imgur.com/P5wRIOi.jpg)Show Image(https://i.imgur.com/vn1kHEv.jpg)Show Image(https://i.imgur.com/qGaZKrp.jpg)
looks amazing
Post by: reconsiderit on Tue, 27 February 2018, 23:25:39
got mine just now. packaging was perfect. thanks again yuktsi! took some quick pics:Show Image(https://i.imgur.com/RP9VmJ6.jpg)Show Image(https://i.imgur.com/aXL2So1.jpg)Show Image(https://i.imgur.com/JLkS5vP.jpg)Show Image(https://i.imgur.com/BkXLXfH.jpg)Show Image(https://i.imgur.com/1LByZGP.jpg)Show Image(https://i.imgur.com/FnB2JZs.jpg)
these are all greys for comparison:Show Image(https://i.imgur.com/mGpq4by.jpg)
vs X60 (wedge brothers):Show Image(https://i.imgur.com/P5wRIOi.jpg)Show Image(https://i.imgur.com/vn1kHEv.jpg)Show Image(https://i.imgur.com/qGaZKrp.jpg)
looks amazing
That looks fantastic. Something along the lines of a gunmetal or titanium grey.
Just wanted to check, but 910 poly is scheduled for the end-ish of march, right?
Post by: Puddsy on Wed, 28 February 2018, 00:13:24
got mine just now. packaging was perfect. thanks again yuktsi! took some quick pics:Show Image(https://i.imgur.com/RP9VmJ6.jpg)Show Image(https://i.imgur.com/aXL2So1.jpg)Show Image(https://i.imgur.com/JLkS5vP.jpg)Show Image(https://i.imgur.com/BkXLXfH.jpg)Show Image(https://i.imgur.com/1LByZGP.jpg)Show Image(https://i.imgur.com/FnB2JZs.jpg)
these are all greys for comparison:Show Image(https://i.imgur.com/mGpq4by.jpg)
vs X60 (wedge brothers):Show Image(https://i.imgur.com/P5wRIOi.jpg)Show Image(https://i.imgur.com/vn1kHEv.jpg)Show Image(https://i.imgur.com/qGaZKrp.jpg)
Wow, looks great. Really like the bottom.
Post by: jenggo on Wed, 28 February 2018, 17:49:47
(https://i.imgur.com/eDoqn2Q.jpg)
(https://i.imgur.com/nfVlMaF.jpg)
(https://i.imgur.com/upbfCae.jpg)
(https://i.imgur.com/DT7y3WR.jpg)
(https://i.imgur.com/mgUwpab.jpg)
(https://i.imgur.com/U35JI8m.jpg)
(https://i.imgur.com/LdBqsqL.jpg)
(https://i.imgur.com/Fjn5DAB.jpg)
(https://i.imgur.com/TvWSbuL.jpg)
Post by: ___q on Wed, 28 February 2018, 20:21:59
More
Got mine today. Design of the board is amazing (and the weight is gorgeous). Packaging is great. The lighter grey is very nice and matches the brass well.
However, I hate to complain, but while the bottom piece is flawless, my top piece is kind of beat up -- there are many small scratches on the sides, and a bit of a ding on the back:
(https://i.imgur.com/dmCmpZu.jpg) (the dark bits are all scratches, definitely not dirt/dust)
(https://i.imgur.com/5JTOoys.jpg)
(https://i.imgur.com/gCf9LgT.jpg) (the focus in this picture is especially bad...)
Maybe easier to see at full image size / zoomed in a bit (https://imgur.com/a/vKDh3), sorry for the quick phone pictures, lighting and focus aren't perfect.
(Additionally the top and bottom colors don't match super well, the top is significantly "golder"/warmer. I never really expect greys to be perfect though so the color is not a huge deal to me.)
EDIT: fixed images, not sure how I messed up at imgur...
However, I hate to complain, but while the bottom piece is flawless, my top piece is kind of beat up -- there are many small scratches on the sides, and a bit of a ding on the back:
(https://i.imgur.com/dmCmpZu.jpg) (the dark bits are all scratches, definitely not dirt/dust)
(https://i.imgur.com/5JTOoys.jpg)
(https://i.imgur.com/gCf9LgT.jpg) (the focus in this picture is especially bad...)
Maybe easier to see at full image size / zoomed in a bit (https://imgur.com/a/vKDh3), sorry for the quick phone pictures, lighting and focus aren't perfect.
(Additionally the top and bottom colors don't match super well, the top is significantly "golder"/warmer. I never really expect greys to be perfect though so the color is not a huge deal to me.)
EDIT: fixed images, not sure how I messed up at imgur...
Post by: Puddsy on Wed, 28 February 2018, 20:32:08
Finally...!!!Show Image(https://i.imgur.com/eDoqn2Q.jpg)Show Image(https://i.imgur.com/nfVlMaF.jpg)Show Image(https://i.imgur.com/upbfCae.jpg)Show Image(https://i.imgur.com/DT7y3WR.jpg)Show Image(https://i.imgur.com/mgUwpab.jpg)
That pink is great!
Post by: yuktsi on Wed, 28 February 2018, 21:54:32
Post by: captainish on Wed, 28 February 2018, 23:44:49
Post by: yuktsi on Thu, 01 March 2018, 00:37:35
Got my pink in. Will post some pictures tomorrow when I have lighting. Ano and case were near perfect for me.Hope everything is good. I will log in more often during this period of time. If you guys have any issue, please don't hesitate to PM me here on GH. My email is yuktsi@gmail.com in case you don't have a GH account.
The Unicorn PCB is the first PCB that I designed all by myself, would like to hear more about it from you guys.
Cheers.
Post by: vtachkov on Thu, 01 March 2018, 01:09:44
Post by: finalarcadia on Thu, 01 March 2018, 07:14:38
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
Post by: crtexcnndrm99 on Thu, 01 March 2018, 07:26:21
Received my grey. The bead blasting is like nothing I've ever seen before. Pictures can't possibly do it justice.Those wonderful words and no pictures?!
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
You’re killing me here. ;)
Post by: darkslay3r on Thu, 01 March 2018, 07:28:28
Received my grey. The bead blasting is like nothing I've ever seen before. Pictures can't possibly do it justice.Those wonderful words and no pictures?!
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
You’re killing me here. ;)
same bro, for now picture > words :)
Post by: finalarcadia on Thu, 01 March 2018, 07:31:48
Soon tmReceived my grey. The bead blasting is like nothing I've ever seen before. Pictures can't possibly do it justice.Those wonderful words and no pictures?!
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
You’re killing me here. ;)
same bro, for now picture > words :)
Sent from my SM-G950U using Tapatalk
Post by: yuktsi on Thu, 01 March 2018, 08:03:40
Received my grey. The bead blasting is like nothing I've ever seen before. Pictures can't possibly do it justice.You may put a tape under the brass insert. Or a thin foam. Do send me a PM if you are not happy with anything.
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
Sent from my iPhone using Tapatalk
Post by: breckstar on Thu, 01 March 2018, 09:00:14
Sent you a pm about missing tracking.Got my pink in. Will post some pictures tomorrow when I have lighting. Ano and case were near perfect for me.Hope everything is good. I will log in more often during this period of time. If you guys have any issue, please don't hesitate to PM me here on GH. My email is yuktsi@gmail.com in case you don't have a GH account.
The Unicorn PCB is the first PCB that I designed all by myself, would like to hear more about it from you guys.
Cheers.
Post by: yuktsi on Thu, 01 March 2018, 10:09:30
Just replied to you with the tracking. Do let me know if you still haven't received the board.Sent you a pm about missing tracking.Got my pink in. Will post some pictures tomorrow when I have lighting. Ano and case were near perfect for me.Hope everything is good. I will log in more often during this period of time. If you guys have any issue, please don't hesitate to PM me here on GH. My email is yuktsi@gmail.com in case you don't have a GH account.
The Unicorn PCB is the first PCB that I designed all by myself, would like to hear more about it from you guys.
Cheers.
Post by: dgneo on Thu, 01 March 2018, 10:14:10
Post by: Shoah on Thu, 01 March 2018, 10:45:38
Post by: popkorn62 on Thu, 01 March 2018, 12:26:18
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: Pragmatizm on Thu, 01 March 2018, 12:31:57
Post by: vtachkov on Thu, 01 March 2018, 15:00:19
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
Post by: Puddsy on Thu, 01 March 2018, 15:16:52
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
pretty sure the plates are milled, so scratches like that are common
but again, you don't really see them when it's assembled so whatever
glad you like your board
Post by: yuktsi on Thu, 01 March 2018, 15:25:13
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.Thank you. The plate was coated with a layer of something to protect it from oxidation, there goes the glue-like substance. Should be able to sand it off with a higher grade sandpaper. The weight was applied to same coating as well.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
I've sweaty palms and am quite bothered by the oxidised brass weight on my other boards. This seems to be a better option for me than nickel plating it.
Post by: Puddsy on Thu, 01 March 2018, 15:32:48
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.Thank you. The plate was coated with a layer of something to protect it from oxidation, there goes the glue-like substance. Should be able to sand it off with a higher grade sandpaper. The weight was applied to same coating as well.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
I've sweaty palms and am quite bothered by the oxidised brass weight on my other boards. This seems to be a better option for me than nickel plating it.
agree
been fun to watch my mira weight tarnish over the last month or so though
Post by: xondat on Thu, 01 March 2018, 15:49:34
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.Thank you. The plate was coated with a layer of something to protect it from oxidation, there goes the glue-like substance. Should be able to sand it off with a higher grade sandpaper. The weight was applied to same coating as well.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
I've sweaty palms and am quite bothered by the oxidised brass weight on my other boards. This seems to be a better option for me than nickel plating it.
agree
been fun to watch my mira weight tarnish over the last month or so though
Tarnishing is super nice as long as it's 100% on it's own and not by fingerprints, otherwise it looks awful :'(
Post by: Puddsy on Thu, 01 March 2018, 16:23:29
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.Thank you. The plate was coated with a layer of something to protect it from oxidation, there goes the glue-like substance. Should be able to sand it off with a higher grade sandpaper. The weight was applied to same coating as well.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
I've sweaty palms and am quite bothered by the oxidised brass weight on my other boards. This seems to be a better option for me than nickel plating it.
agree
been fun to watch my mira weight tarnish over the last month or so though
Tarnishing is super nice as long as it's 100% on it's own and not by fingerprints, otherwise it looks awful :'(
hard agree
Post by: yuktsi on Thu, 01 March 2018, 16:33:38
Post by: dblack on Thu, 01 March 2018, 16:46:21
(https://farm5.staticflickr.com/4617/40516405582_c95f1d3ab2_k.jpg)
thanks for a smooth buy yuktsi, cant wait for the next one.
Post by: xondat on Thu, 01 March 2018, 16:52:33
heres my new bb...Show Image(https://farm5.staticflickr.com/4617/40516405582_c95f1d3ab2_k.jpg)
thanks for a smooth buy yuktsi, cant wait for the next one.
Plain side profiles are underrated.
Did yuktsi ever explain why the top right key is a blocker?
Post by: futurecrime on Thu, 01 March 2018, 17:21:35
heres my new bb...Show Image(https://farm5.staticflickr.com/4617/40516405582_c95f1d3ab2_k.jpg)
thanks for a smooth buy yuktsi, cant wait for the next one.
Super nice.
Post by: Puddsy on Thu, 01 March 2018, 17:43:00
heres my new bb...Show Image(https://farm5.staticflickr.com/4617/40516405582_c95f1d3ab2_k.jpg)
thanks for a smooth buy yuktsi, cant wait for the next one.
Plain side profiles are underrated.
Did yuktsi ever explain why the top right key is a blocker?
it looks cool
don't really need more reason for it
Post by: [Lewynlight] on Thu, 01 March 2018, 20:03:50
Post by: darkslay3r on Fri, 02 March 2018, 05:17:26
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)TGR 910 CE (https://flic.kr/p/24KpWXf) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
(https://farm5.staticflickr.com/4678/38761414740_c291eb837a_b.jpg) (https://flic.kr/p/224dob9)TGR 910 CE (https://flic.kr/p/224dob9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
(https://farm5.staticflickr.com/4703/38761414730_f6dcd365f4_b.jpg) (https://flic.kr/p/224doaY)TGR 910 CE (https://flic.kr/p/224doaY) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
(https://farm5.staticflickr.com/4781/25701019237_01cf91fa91_b.jpg) (https://flic.kr/p/Fa7rBk)TGR 910 CE (https://flic.kr/p/Fa7rBk) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Post by: kawasaki161 on Fri, 02 March 2018, 06:05:33
Post by: Sissy on Fri, 02 March 2018, 06:29:04
Show Image
Show Image
Show Image
Waiting is over, please welcome Silver baby
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)
(https://farm5.staticflickr.com/4678/38761414740_c291eb837a_b.jpg) (https://flic.kr/p/224dob9)
(https://farm5.staticflickr.com/4703/38761414730_f6dcd365f4_b.jpg) (https://flic.kr/p/224doaY)
(https://farm5.staticflickr.com/4781/25701019237_01cf91fa91_b.jpg) (https://flic.kr/p/Fa7rBk)TGR 910 CE (https://flic.kr/p/Fa7rBk) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Great shots!
I'm still pleased that the PCB is green it makes a change from all the whites, even if you can't see it once built
Post by: darkslay3r on Fri, 02 March 2018, 06:30:29
Great shots!TGR 910 CE (https://flic.kr/p/224doaY) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageTGR 910 CE (https://flic.kr/p/224dob9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageTGR 910 CE (https://flic.kr/p/24KpWXf) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageWaiting is over, please welcome Silver baby
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)
(https://farm5.staticflickr.com/4678/38761414740_c291eb837a_b.jpg) (https://flic.kr/p/224dob9)
(https://farm5.staticflickr.com/4703/38761414730_f6dcd365f4_b.jpg) (https://flic.kr/p/224doaY)
(https://farm5.staticflickr.com/4781/25701019237_01cf91fa91_b.jpg) (https://flic.kr/p/Fa7rBk)TGR 910 CE (https://flic.kr/p/Fa7rBk) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
I'm still pleased that the PCB is green it makes a change from all the whites, even if you can't see it once built
Nothing wrong with green lol, it’s classy
Sent from my iPhone using Tapatalk
Post by: yuktsi on Fri, 02 March 2018, 07:50:50
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(Don't be sad, bro. I had only 3 units made and 2 were sent back for rework. :'(
Post by: Shoah on Fri, 02 March 2018, 08:31:12
Hi guys, there was an unfortunate event, the second batch of shipment which is scheduled to be sent off tomorrow will be put on hold until the first batch is all delivered.What kind of unfortunate event?
Post by: darkslay3r on Fri, 02 March 2018, 10:04:51
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(
I can have silver because i spam him in PM, maybe he got sick of my PM and made my wish.
Also i pay extra money for it (in anodize manu, if you make only little number of color, well in this case maybe only 1 piece, you need to pay extra sh** to make it happen)
And i willing to accept if the unit doesn't go well or some sh** happen.
Haih i throwed extra bet for this color bro, not easy to make this color happened.
You see his statement, made 3 and 2 sent back for rework.
Post by: kawasaki161 on Fri, 02 March 2018, 10:14:14
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(Don't be sad, bro. I had only 3 units made and 2 were sent back for rework. :'(
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(
I can have silver because i spam him in PM, maybe he got sick of my PM and made my wish.
Also i pay extra money for it (in anodize manu, if you make only little number of color, well in this case maybe only 1 piece, you need to pay extra sh** to make it happen)
And i willing to accept if the unit doesn't go well or some sh** happen.
Haih i throwed extra bet for this color bro, not easy to make this color happened.
You see his statement, made 3 and 2 sent back for rework.
Oh, okay, still hyped for the black one so it's all good :thumb:
Post by: darkslay3r on Fri, 02 March 2018, 10:15:34
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(Don't be sad, bro. I had only 3 units made and 2 were sent back for rework. :'(Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(
I can have silver because i spam him in PM, maybe he got sick of my PM and made my wish.
Also i pay extra money for it (in anodize manu, if you make only little number of color, well in this case maybe only 1 piece, you need to pay extra sh** to make it happen)
And i willing to accept if the unit doesn't go well or some sh** happen.
Haih i throwed extra bet for this color bro, not easy to make this color happened.
You see his statement, made 3 and 2 sent back for rework.
Oh, okay, still hyped for the black one so it's all good :thumb:
It’s only color bro hahaha, quality is no doubt still very great.
Sent from my iPhone using Tapatalk
Post by: yohanskee on Fri, 02 March 2018, 10:57:56
Sorry for potato pic
Just got this today, definitely best keyboard I have. The weight with this compact size is unreal! And the packaging are very great, a lot of protection. Thank you yuktsi!
Post by: Puddsy on Fri, 02 March 2018, 12:29:11
Show Image
Show Image
Show Image
Waiting is over, please welcome Silver baby
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)
(https://farm5.staticflickr.com/4678/38761414740_c291eb837a_b.jpg) (https://flic.kr/p/224dob9)
(https://farm5.staticflickr.com/4703/38761414730_f6dcd365f4_b.jpg) (https://flic.kr/p/224doaY)
(https://farm5.staticflickr.com/4781/25701019237_01cf91fa91_b.jpg) (https://flic.kr/p/Fa7rBk)TGR 910 CE (https://flic.kr/p/Fa7rBk) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
silver is the best color
Post by: darkslay3r on Fri, 02 March 2018, 14:59:25
TGR 910 CE (https://flic.kr/p/224doaY) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageTGR 910 CE (https://flic.kr/p/224dob9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageTGR 910 CE (https://flic.kr/p/24KpWXf) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageWaiting is over, please welcome Silver baby
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)
(https://farm5.staticflickr.com/4678/38761414740_c291eb837a_b.jpg) (https://flic.kr/p/224dob9)
(https://farm5.staticflickr.com/4703/38761414730_f6dcd365f4_b.jpg) (https://flic.kr/p/224doaY)
(https://farm5.staticflickr.com/4781/25701019237_01cf91fa91_b.jpg) (https://flic.kr/p/Fa7rBk)TGR 910 CE (https://flic.kr/p/Fa7rBk) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
silver is the best color
Definitely bro !
Sent from my iPhone using Tapatalk
Post by: Pragmatizm on Fri, 02 March 2018, 17:40:22
Post by: darkslay3r on Fri, 02 March 2018, 17:42:07
Got mine put together and programmed. Could not be happier thank you so much for making this happen. Im glad this could be my first custom.
Congrats for your first custom, obviously that’s great cop as first. I remember exactly last year my first custom was 60% china pcb lol
Sent from my iPhone using Tapatalk
Post by: SixtyLife on Fri, 02 March 2018, 17:43:36
Got mine put together and programmed. Could not be happier thank you so much for making this happen. Im glad this could be my first custom.pics pls
Post by: breckstar on Fri, 02 March 2018, 19:33:03
SA Valentine, Box Navies, Zeal Stabs, removed brass 910 blocker
(https://i.imgur.com/jyWeiKA.jpg)
Post by: yuktsi on Fri, 02 March 2018, 20:55:01
Here's my 910ceGlad that it arrived at you safely. Was so worried that your parcel went missing.Enjoy
SA Valentine, Box Navies, Zeal Stabs, removed brass 910 blockerShow Image(https://i.imgur.com/jyWeiKA.jpg)
Sent from my iPhone using Tapatalk
Post by: darkslay3r on Fri, 02 March 2018, 21:02:54
Here's my 910ce :) Enjoy
SA Valentine, Box Navies, Zeal Stabs, removed brass 910 blockerShow Image(https://i.imgur.com/jyWeiKA.jpg)
Nice build there
Sent from my iPhone using Tapatalk
Post by: cmd on Fri, 02 March 2018, 21:05:39
Post by: lunr on Fri, 02 March 2018, 22:29:14
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
Post by: crtexcnndrm99 on Fri, 02 March 2018, 23:33:51
(Attachment Link)Hot diggity dawg.. :o
Post by: Puddsy on Sat, 03 March 2018, 01:01:36
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
Post by: darkslay3r on Sat, 03 March 2018, 03:06:02
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
Post by: Sissy on Sat, 03 March 2018, 03:48:07
its got too dark to finish soldering here so just seeing what keycaps work well and I'm really pleased with sky dolch on it.
(https://i.imgur.com/XQmX0nO.jpg)
Post by: Puddsy on Sat, 03 March 2018, 11:52:58
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
i think the 910 diffuser is wrong, but the grey is right so i've no idea
super duper low quality unfinished build picture
its got too dark to finish soldering here so just seeing what keycaps work well and I'm really pleased with sky dolch on it.Show Image(https://i.imgur.com/XQmX0nO.jpg)
how do you have electricity to solder, but no lightbulbs
i become more curious about where you live every time you post about it
Post by: lunr on Sat, 03 March 2018, 11:56:18
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
Post by: p_blaze on Sat, 03 March 2018, 11:56:41
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
Maybe he asked nicely
Very nicely
Post by: brighenne on Sat, 03 March 2018, 12:21:15
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
i think the 910 diffuser is wrong, but the grey is right so i've no ideasuper duper low quality unfinished build picture
its got too dark to finish soldering here so just seeing what keycaps work well and I'm really pleased with sky dolch on it.Show Image(https://i.imgur.com/XQmX0nO.jpg)
how do you have electricity to solder, but no lightbulbs
i become more curious about where you live every time you post about it
He lives in the bush with a propane soldering iron.
Post by: Puddsy on Sat, 03 March 2018, 12:47:28
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
a few 910 CEs are shipped, so could be that he bought one aftermarket
Post by: megaforce on Sat, 03 March 2018, 13:37:58
(https://i.imgur.com/DkMycza.jpg)
Post by: Puddsy on Sat, 03 March 2018, 13:47:32
Another fantastic TGR board, can't wait for the next Yuksti speical.Show Image(https://i.imgur.com/DkMycza.jpg)
this is very good
Post by: megaforce on Sat, 03 March 2018, 13:50:26
Another fantastic TGR board, can't wait for the next Yuksti speical.Show Image(https://i.imgur.com/DkMycza.jpg)
this is very good
arigato, oniichan
Post by: cmd on Sat, 03 March 2018, 14:29:47
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
a few 910 CEs are shipped, so could be that he bought one aftermarket
no, it is not aftermarket. it is from this group buy lol
Post by: futurecrime on Sat, 03 March 2018, 15:56:58
Another fantastic TGR board, can't wait for the next Yuksti speical.Show Image(https://i.imgur.com/DkMycza.jpg)
Oh my God. That's bloody gorgeous.
Post by: tokidokijake on Sat, 03 March 2018, 15:59:53
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Post by: Puddsy on Sat, 03 March 2018, 16:03:10
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
Post by: tokidokijake on Sat, 03 March 2018, 16:04:22
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
Post by: Puddsy on Sat, 03 March 2018, 16:05:04
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
out of curiosity, what country are you located in?
Post by: tokidokijake on Sat, 03 March 2018, 16:05:57
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
out of curiosity, what country are you located in?
USA, i'm in long beach CA
Post by: p_blaze on Sat, 03 March 2018, 16:06:47
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
Post by: Puddsy on Sat, 03 March 2018, 16:07:05
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
out of curiosity, what country are you located in?
USA, i'm in long beach CA
weird, less common to see issues like this with US internal shipping
and yuktsi's packaging is usually very good too, so no clue how this happened
really unfortunate
Post by: tokidokijake on Sat, 03 March 2018, 16:07:21
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
lol NSFW
Post by: tokidokijake on Sat, 03 March 2018, 16:08:09
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
out of curiosity, what country are you located in?
USA, i'm in long beach CA
weird, less common to see issues like this with US internal shipping
and yuktsi's packaging is usually very good too, so no clue how this happened
really unfortunate
yea, packaging seemed good. Like you said they must have just dropped it off a cliff
Post by: p_blaze on Sat, 03 March 2018, 16:09:35
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
lol NSFW
jokes aside, you have my condolences. It's a real shame to see such a nice board in that state
Post by: tokidokijake on Sat, 03 March 2018, 16:11:44
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
lol NSFW
jokes aside, you have my condolences. It's a real shame to see such a nice board in that state
I have terrible luck with things. I have the skeletor key set and the skeletor bbv2...which my dog chewed up and destroyed. The ONLY cap he got and it was the one meant for the board. Sad times
Post by: lunr on Sat, 03 March 2018, 16:14:02
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
a few 910 CEs are shipped, so could be that he bought one aftermarket
Post by: p_blaze on Sat, 03 March 2018, 16:14:39
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
lol NSFW
jokes aside, you have my condolences. It's a real shame to see such a nice board in that state
I have terrible luck with things. I have the skeletor key set and the skeletor bbv2...which my dog chewed up and destroyed. The ONLY cap he got and it was the one meant for the board. Sad times
AAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAA
that has got to be the most painful thing i have read on this forum
Post by: crtexcnndrm99 on Sat, 03 March 2018, 16:44:25
Sent from my iPhone using Tapatalk
Post by: dblack on Sat, 03 March 2018, 16:56:13
Post by: futurecrime on Sat, 03 March 2018, 17:00:10
Post by: SixtyLife on Sat, 03 March 2018, 17:18:27
Post by: tokidokijake on Sat, 03 March 2018, 17:23:21
Damn.. Was the box jacked up?
box didnt seem particularly jacked up somehow
Post by: vtachkov on Sat, 03 March 2018, 17:53:43
Nvm, smd components have markings that indicate which way it should go. Thanks google.
Post by: reconsiderit on Sat, 03 March 2018, 19:22:22
Damn that's really weird, based on the packaging mine had... It would need to be like tossed out of a moving truck for that to happen. There must have been some seriously poor handling from SF Express.
SF express in norcal gets passed onto UPS for delivery. Not sure about socal. They've managed to damage a lot of my things. They crushed an HDD that was sent to me in one of those triple wall mailers.
Post by: tokidokijake on Sat, 03 March 2018, 19:34:02
Damn that's really weird, based on the packaging mine had... It would need to be like tossed out of a moving truck for that to happen. There must have been some seriously poor handling from SF Express.
SF express in norcal gets passed onto UPS for delivery. Not sure about socal. They've managed to damage a lot of my things. They crushed an HDD that was sent to me in one of those triple wall mailers.
yea, i picked up my board from a UPS center after I missed the initial attempted delivery =x
Post by: darkslay3r on Sat, 03 March 2018, 19:35:59
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
IF you feel salty, you can buy mine though
Post by: p_blaze on Sat, 03 March 2018, 19:36:21
Damn that's really weird, based on the packaging mine had... It would need to be like tossed out of a moving truck for that to happen. There must have been some seriously poor handling from SF Express.
SF express in norcal gets passed onto UPS for delivery. Not sure about socal. They've managed to damage a lot of my things. They crushed an HDD that was sent to me in one of those triple wall mailers.
yea, i picked up my board from a UPS center after I missed the initial attempted delivery =x
Their attempted delivery must have been airdropping it at your house without a parachute
Post by: tokidokijake on Sat, 03 March 2018, 19:37:49
Damn that's really weird, based on the packaging mine had... It would need to be like tossed out of a moving truck for that to happen. There must have been some seriously poor handling from SF Express.
SF express in norcal gets passed onto UPS for delivery. Not sure about socal. They've managed to damage a lot of my things. They crushed an HDD that was sent to me in one of those triple wall mailers.
yea, i picked up my board from a UPS center after I missed the initial attempted delivery =x
Their attempted delivery must have been airdropping it at your house without a parachute
haha yea, the foam the board was in was thick af too. I imagine due to the weight of the board it hit the ground like a comet from space
Post by: p_blaze on Sat, 03 March 2018, 19:37:57
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
IF you feel salty, you can buy mine though
What. Color.
Because i want this
Post by: darkslay3r on Sat, 03 March 2018, 19:39:09
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
IF you feel salty, you can buy mine though
What. Color.
The only Silver made for this round, i offer my Silver to who feel salty.
It's fair, right ?
Post by: p_blaze on Sat, 03 March 2018, 19:40:29
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
IF you feel salty, you can buy mine though
What. Color.
The only Silver made for this round, i offer my Silver to who feel salty.
It's fair, right ?
Yup
I'm not a silver man but you could trade this board for almost anything
Post by: Sissy on Sat, 03 March 2018, 19:42:59
got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
More
(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
Post by: p_blaze on Sat, 03 March 2018, 19:46:22
got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RAMoreShow Image(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
Thanks for the spoiler so I know that this will hurt my soul before I look at it
Post by: tokidokijake on Sat, 03 March 2018, 19:46:56
got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RAMoreShow Image(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
damn looks pretty similar to mine. I'm not sure about filing a claim. I'll look into this too as im sure i'll also have to do it
Post by: futurecrime on Sat, 03 March 2018, 20:00:19
Post by: darkslay3r on Sat, 03 March 2018, 20:03:04
Everyone who hasn't got theirs yet is now quietly freakin out a little. :-X
It will ship by batch, there are 8 people ordered from Indonesia, 4 have received already, the rest is later.
Sent from my iPhone using Tapatalk
Post by: futurecrime on Sat, 03 March 2018, 20:20:20
Everyone who hasn't got theirs yet is now quietly freakin out a little. :-X
It will ship by batch, there are 8 people ordered from Indonesia, 4 have received already, the rest is later.
Sent from my iPhone using Tapatalk
Yes. But I'm not saying everyone is expecting to have received theirs yet, I'm saying everyone who hasn't got theirs safe and sound already is going to be worrying it'll turn up with a dent on the corner.
Anyway, nothing to do but wait. I'm sure Yuktsi is doing what he can to avoid these sorts of accidents.
Post by: glack23 on Sat, 03 March 2018, 20:21:53
Sent from my Pixel using Tapatalk
Post by: lunr on Sat, 03 March 2018, 21:17:28
got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RAMoreShow Image(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
Post by: tokidokijake on Sat, 03 March 2018, 21:44:38
Well if the package is undamaged and unopened, I don't see any reason why it would be the courier. It was well packaged right?got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RAMoreShow Image(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
yea it was
Post by: yuktsi on Sat, 03 March 2018, 22:41:18
Post by: yuktsi on Sat, 03 March 2018, 22:56:55
got mine in today, it looks amazing and the weight is unreal.So sorry to hear that :'(
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
That's why I put the second shipment on hold as soon as I heard about the first one. It seems almost impossible to create such dent inside the box. I've never experienced an issue like this except once where the box was opened by the customer and wasn't packed back properly.
I will have the replacement shipped out soon but would be great if you could filed a claim or anything to the postal service that shipped your order. The first half of the GB has been shipped and unfortunately, there have been three cases already. Good thing is that I have enough to replace, but that's all I got.
I will see what I can do with the remaining ones.
Post by: xondat on Sat, 03 March 2018, 23:00:18
No real idea how it happened, but it was the only one out of 98 that got damaged during shipping so super strange (and your packaging is much better than mine lol).
Post by: yuktsi on Sun, 04 March 2018, 01:35:22
Will look into that.
Sent from my iPhone using Tapatalk
Post by: p_blaze on Sun, 04 March 2018, 10:56:47
Post by: amnesia0287 on Sun, 04 March 2018, 13:57:46
Man, I hope I can get in on the extras... the red on TGR boards is the best I've ever laid eyes on
I don’t think there are more extras based on his previous posts. At least if there isn’t another run to make replacements.
I too would love to get a 910, but for the sake of all people who already order CE and have been waiting I really hope it won’t be needed.
Post by: darkslay3r on Sun, 04 March 2018, 13:59:19
Man, I hope I can get in on the extras... the red on TGR boards is the best I've ever laid eyes on
I believe extras are reserved for special condition, not for sale
Sent from my iPhone using Tapatalk
Post by: p_blaze on Sun, 04 March 2018, 14:01:06
Man, I hope I can get in on the extras... the red on TGR boards is the best I've ever laid eyes on
I believe extras are reserved for special condition, not for sale
Sent from my iPhone using Tapatalk
I remember reading somewhere that extras will be sold after gb and replacements
But maybe i remember wrong idk
Post by: Mr_BeastQuake on Sun, 04 March 2018, 14:02:26
Post by: Signature on Sun, 04 March 2018, 14:12:03
If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?There are no rules regarding this atm, however there is a rule regarding thread-crapping, so if you are looking for extras (idk if they even exist) talk to yuktsi to avoid excessive posting :)
Post by: p_blaze on Sun, 04 March 2018, 14:22:53
If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?There are no rules regarding this atm, however there is a rule regarding thread-crapping, so if you are looking for extras (idk if they even exist) talk to yuktsi to avoid excessive posting :)
aight, I'm not here to threadcrap or solicit a sale on extras
I'll keep my nose out of here if that is what I'm supposed to do
If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?
no need for hostility
I'm not going to solicit extras, that's pretty underhanded and sleazy
I just remember reading something about it in this thread and made a half assed post about it
Post by: Mr_BeastQuake on Sun, 04 March 2018, 14:31:34
no need for hostility
I'm not going to solicit extras, that's pretty underhanded and sleazy
I just remember reading something about it in this thread and made a half assed post about it
I'm not trying to be hostile. Anytime someone mentions extras or someone jokingly says something about something being available, threads fill up with people asking for extras or wanting to buy someone's board if they want to sell. It's not really a beneficial topic to people who are in this GB (which is why this thread exists). Especially since there seems to be some issues going on, seems best to leave posting for people to get their issues sorted, yuktsi to provide updates, and for people to show off their pimpin builds.
There will always be another "dream keyboard". . . we all know that too well and it hurts right in the wallet.
Post by: Signature on Sun, 04 March 2018, 14:34:07
My post wasn't directed at anyone, it was made to clear up the statement Mr_BeastQuake made, and give guidelines for those in the future looking for extras. No harm done!If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?There are no rules regarding this atm, however there is a rule regarding thread-crapping, so if you are looking for extras (idk if they even exist) talk to yuktsi to avoid excessive posting :)
aight, I'm not here to threadcrap or solicit a sale on extras
I'll keep my nose out of here if that is what I'm supposed to do
Let's get back to the GB discussion :)
Post by: Puddsy on Sun, 04 March 2018, 14:57:54
If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?
there's a rule about threadcrapping, i.e. posting uselessly in GB threads, but nothing about asking for extras or asking questions
although it's not like rules really get enforced that often on GH
Post by: Captain Shwah on Sun, 04 March 2018, 23:07:12
Let's get back to the GB discussion :)
Ok ;)
Another member of team pink checking in!
(https://i.imgur.com/qZdI6NS.jpg)
Bravo Yuktsi, this board is stunning!
Post by: yuktsi on Mon, 05 March 2018, 00:12:10
Btw, there will be no extra for sale. If you are keen for one, you may dm me. I have prototype coming from time to time, and if it's good, I may sell.
Shipping will resume tmr. Got some extra foam and bigger boxes. As for the delayed units, I should be collecting them this week. Thanks.
Post by: oatmicro on Mon, 05 March 2018, 00:21:16
Thank you Capt. The keyset looks amazing, is it GMK?
I think that's this one https://www.originativeco.com/products/pbt-valentine :cool:
Post by: kawasaki161 on Mon, 05 March 2018, 02:07:55
Btw, there will be no extra for sale. If you are keen for one, you may dm me. I have prototype coming from time to time, and if it's good, I may sell.
RIP yuktsi's inbox :))
Shipping will resume tmr. Got some extra foam and bigger boxes. As for the delayed units, I should be collecting them this week. Thanks.
Wohoo, great news. I really hope I won't have to go to the customs office for it... but I'm pretty sure I'll have to :(
Post by: Sissy on Mon, 05 March 2018, 03:04:03
Such a tiny hole causing such damage.
(https://i.imgur.com/ILAHpaH.jpg)
Post by: futurecrime on Mon, 05 March 2018, 04:33:51
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
Uurgh. What did they do? Drop it on a metal spike? Damn.
Post by: [Lewynlight] on Mon, 05 March 2018, 05:34:03
(https://i.imgur.com/dYUhNy7.jpg)
Post by: Captain Shwah on Mon, 05 March 2018, 07:06:54
Thank you Capt. The keyset looks amazing, is it GMK?
I think that's this one https://www.originativeco.com/products/pbt-valentine :cool:
This is right. The spacebar is GMK though, because the beige mod set only comes with pink ones :-\
Post by: darkslay3r on Mon, 05 March 2018, 11:00:59
me waiting for my package be like.... :-\Show Image(https://i.imgur.com/dYUhNy7.jpg)
it's a fake
Post by: xondat on Mon, 05 March 2018, 11:03:38
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
Yup, this is exactly what I've seen with the X60. No matter the packaging, it seems unavoidable, and just based on luck.
Post by: kawasaki161 on Mon, 05 March 2018, 11:31:29
Yup, this is exactly what I've seen with the X60. No matter the packaging, it seems unavoidable, and just based on luck.
Unavoidable you say... starts lining the inside his boxes with sheet metal
Post by: p_blaze on Mon, 05 March 2018, 11:38:37
Yup, this is exactly what I've seen with the X60. No matter the packaging, it seems unavoidable, and just based on luck.
Unavoidable you say... starts lining the inside his boxes with sheet metal
It's the next step in mechanical keyboard innovation
cnc anodized boxes for your keyboard
Post by: eujin1994 on Mon, 05 March 2018, 14:02:12
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :
(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case with some kits(this was a bundle together with the case) from a nice vendor in GH. After confirming with the vendor how it was packed, mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper, re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.
(https://i.imgur.com/5AY7Pq5.jpg)
(https://i.imgur.com/aHHjKoR.jpg)
(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
Post by: kiwi99 on Mon, 05 March 2018, 14:06:33
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case from a nice vendor in GH. Mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in the box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
this is so ****ed up, so sorry to hear that happened to you what the hell
Post by: p_blaze on Mon, 05 March 2018, 14:23:01
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case from a nice vendor in GH. Mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
omg that is baaaad
they didn't even give you the original packaging that's just screwed up
Post by: pr0ximity on Mon, 05 March 2018, 14:45:51
me waiting for my package be like.... :-\Show Image(https://i.imgur.com/dYUhNy7.jpg)
Soon™
Post by: cuongcan2020 on Mon, 05 March 2018, 17:36:15
Looking for someone can help me assemble it. ;D
(https://i.imgur.com/daQgARv.jpg)
(https://i.imgur.com/ORcY7wn.jpg)
Post by: yuktsi on Tue, 06 March 2018, 01:01:06
That's not the way to pack a board imo.I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case with some kits(this was a bundle together with the case) from a nice vendor in GH. After confirming with the vendor how it was packed, mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper, re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
Post by: Puddsy on Tue, 06 March 2018, 01:14:07
That's not the way to pack a board imo.I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case with some kits(this was a bundle together with the case) from a nice vendor in GH. After confirming with the vendor how it was packed, mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper, re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
i've seen things like this happen with a few boards, they use a pretty big knife to open the package and sometimes **** just gets ****ed up
and i think he said somewhere that they repacked it after opening it
Post by: futurecrime on Tue, 06 March 2018, 02:52:10
Post by: eujin1994 on Tue, 06 March 2018, 03:04:04
That's not the way to pack a board imo.I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case with some kits(this was a bundle together with the case) from a nice vendor in GH. After confirming with the vendor how it was packed, mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper, re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
i've seen things like this happen with a few boards, they use a pretty big knife to open the package and sometimes **** just gets ****ed up
and i think he said somewhere that they repacked it after opening it
Not sure how mine went through until like that, but I know customs for sure will open it with knife if the goods were heavily wrapped with bubble wraps for inspection because no one has the time to unwrap it so they just cut through without hesitation. There are like 2 possibilities being hijacked. Either the whole thing inside the parcel was repacked during transit or the customs in my country repacked it in another department because maybe they think the box is sexy enough to be stolen and cut through to reinspect it. But still... it doesn't make any sense on the 2nd one to repack and reinspect again.
Post by: fublamchu on Thu, 08 March 2018, 12:28:22
Sent from my SM-G930P using Tapatalk
Post by: Dreamre on Thu, 08 March 2018, 15:46:30
Post by: kconfire on Thu, 08 March 2018, 16:31:14
Post by: futurecrime on Thu, 08 March 2018, 16:48:03
I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Post by: p_blaze on Thu, 08 March 2018, 16:57:30
That makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Post by: Goon on Thu, 08 March 2018, 17:17:50
(https://i.imgur.com/maX16qs.jpg)
(https://i.imgur.com/dqKeE0K.jpg)
Post by: crtexcnndrm99 on Thu, 08 March 2018, 17:19:55
This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Post by: Goon on Thu, 08 March 2018, 17:44:13
This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.
(https://i.imgur.com/2BhyOeR.jpg)
Post by: brighenne on Thu, 08 March 2018, 17:58:00
Post by: Puddsy on Thu, 08 March 2018, 17:58:08
This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
Post by: futurecrime on Thu, 08 March 2018, 19:03:38
This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
Post by: xondat on Thu, 08 March 2018, 19:13:29
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
Got to be, it's the only time they're not with Yuktsi and all together. Sucks ass.
Post by: yuktsi on Thu, 08 March 2018, 22:05:28
Yeah, the damaged ones all went out on the same day :-[This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
Post by: p_blaze on Thu, 08 March 2018, 22:11:58
The geekhack detective squad has solved the case!Yeah, the damaged ones all went out on the same day :-[This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
Post by: captainish on Fri, 09 March 2018, 00:20:02
Post by: futurecrime on Fri, 09 March 2018, 03:16:49
Wanted to post up my 910 before it sits too long. I have already corrected the crooked caps but I haven't had a chance to take new photos in this perfect New England weather.
Hubba hubba.
Post by: futurecrime on Fri, 09 March 2018, 03:23:15
Yeah, the damaged ones all went out on the same day :-[This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
Man that sucks so much. What's the solution? Different post office?
Post by: tomatoboy on Fri, 09 March 2018, 03:35:15
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
Post by: futurecrime on Fri, 09 March 2018, 06:50:57
All these "pen pushing" damage reminds me of renewing my credit card when the bank changes their terms. I had to go to the bank when my card can no longer be used and then replaced me a new one but I have to give the old one to them. They punch holes to the old one and threw them in the bin.
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
If part of a courier company's official process is to jam a sharp metal object into every package they handle I can't imagine that company would survive very long.
Post by: tomatoboy on Fri, 09 March 2018, 09:14:00
All these "pen pushing" damage reminds me of renewing my credit card when the bank changes their terms. I had to go to the bank when my card can no longer be used and then replaced me a new one but I have to give the old one to them. They punch holes to the old one and threw them in the bin.
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
If part of a courier company's official process is to jam a sharp metal object into every package they handle I can't imagine that company would survive very long.
I guess hole in a package is a normal thing now since there are lots of similar complaints, it could be a sharp stamping machine they used to validate as "safe". I couldn't imagine using their own hands to stab it that hard piercing through the box and onto the valuable goods.
Post by: p_blaze on Fri, 09 March 2018, 09:15:51
All these "pen pushing" damage reminds me of renewing my credit card when the bank changes their terms. I had to go to the bank when my card can no longer be used and then replaced me a new one but I have to give the old one to them. They punch holes to the old one and threw them in the bin.
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
If part of a courier company's official process is to jam a sharp metal object into every package they handle I can't imagine that company would survive very long.
I guess hole in a package is a normal thing now since there are lots of similar complaints, it could be a sharp stamping machine they used to validate as "safe". I couldn't imagine using their own hands to stab it that hard piercing through the box and onto the valuable goods.
You have yet to experience the horrors of international shipping and UPS
Post by: futurecrime on Fri, 09 March 2018, 09:22:36
All these "pen pushing" damage reminds me of renewing my credit card when the bank changes their terms. I had to go to the bank when my card can no longer be used and then replaced me a new one but I have to give the old one to them. They punch holes to the old one and threw them in the bin.
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
If part of a courier company's official process is to jam a sharp metal object into every package they handle I can't imagine that company would survive very long.
I guess hole in a package is a normal thing now since there are lots of similar complaints, it could be a sharp stamping machine they used to validate as "safe". I couldn't imagine using their own hands to stab it that hard piercing through the box and onto the valuable goods.
It's not hard to stab through cardboard and bubble wrap with a metal spike using your hand. There's a lot of packing around the item inside the box, this theoretical stamping machine would need to pierce several inches into the package to damage a keyboard. There's just no way that a courier service is gonna incorporate something like that into their process. It would be insane.
Post by: Pragmatizm on Fri, 09 March 2018, 12:50:59
Post by: Pragmatizm on Fri, 09 March 2018, 14:31:10
Heys ive run into an issue with the PCB. I went to install LEDs today and go the "USB device not recognized" went into device manager and it shows "device has reported problems (Code 43)". Normally this would be a driver issue or hardware issues. Prior to installing leds everything was working fine, had been using the keyboard all week. What is the default key to force it to boot only the bootloader without loading the firmware, so I can reflash it? Also has anyone installed LEDs on theirs yet? If so any issues? Im using warm white leds (https://shop.evilmadscientist.com/productsmenu/partsmenu/596), with sip sockets.UPDATE: I jumped the fw_jp points on the PCB and placed an led on the caps lock. LED flashed so the pcb works fine. Would someone be willing to send me a hex to load. Like an idiot I did not make a copy of mine before all this happened.
Post by: yohanskee on Mon, 12 March 2018, 04:47:45
[attachimg=1]
Post by: Sissy on Mon, 12 March 2018, 09:34:54
Finally assembled, best keyboard I ever have!Hot damn 👌🏻
(Attachment Link)
Also how we looking for time on replacement parts?
Post by: yuktsi on Tue, 13 March 2018, 09:15:10
As for dented orders, I am waiting for the courier to respond to decide on the ways forward. I have enough on hand now to replace the more severe ones.
Post by: yuktsi on Tue, 13 March 2018, 09:16:40
I sent an additional bottom to be re-anodised to purple for you.Finally assembled, best keyboard I ever have!Hot damn 👌🏻
(Attachment Link)
Also how we looking for time on replacement parts?
Post by: vtachkov on Tue, 13 March 2018, 19:57:01
Post by: yuktsi on Tue, 13 March 2018, 20:15:39
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Post by: vtachkov on Tue, 13 March 2018, 20:35:22
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Here are a few that don't suck too much, unlike my soldering skills. https://imgur.com/a/ayPKw (https://imgur.com/a/ayPKw) Looking at the photo with zoom, I guess I could try doing a better job, but the pins looks like they are all connected. In case you can't see in the photo, the chip's dot is in the upper left and the RGB LED's marked corner is in the upper right.
Thanks for taking a look Yuktsi. First time doing any SMD work and using bootmapper.
Post by: p_blaze on Tue, 13 March 2018, 20:46:01
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Here are a few that don't suck too much, unlike my soldering skills. https://imgur.com/a/ayPKw (https://imgur.com/a/ayPKw) Looking at the photo with zoom, I guess I could try doing a better job, but the pins looks like they are all connected. In case you can't see in the photo, the chip's dot is in the upper left and the RGB LED's marked corner is in the upper right.
Thanks for taking a look Yuktsi. First time doing any SMD work and using bootmapper.
If the 8-pin is the rgb microcontroller then the judging by the fourth pic you might have messed up a trace, but what is more likely judging by the second pic is that a little bit of your solder blob is touching the blob from another pin and shorting out or something
I don't solder keebs in particular so afaik it's the second problem I listed which is very common
Post by: vtachkov on Tue, 13 March 2018, 22:42:35
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Here are a few that don't suck too much, unlike my soldering skills. https://imgur.com/a/ayPKw (https://imgur.com/a/ayPKw) Looking at the photo with zoom, I guess I could try doing a better job, but the pins looks like they are all connected. In case you can't see in the photo, the chip's dot is in the upper left and the RGB LED's marked corner is in the upper right.
Thanks for taking a look Yuktsi. First time doing any SMD work and using bootmapper.
If the 8-pin is the rgb microcontroller then the judging by the fourth pic you might have messed up a trace, but what is more likely judging by the second pic is that a little bit of your solder blob is touching the blob from another pin and shorting out or something
I don't solder keebs in particular so afaik it's the second problem I listed which is very common
Thanks for the suggestion. I tried to clean up the RGB microcontroller as best I could, making sure none of the pins were connected with a random solder bridge. Using a 3x lens it looked alright. I added another LED to be sure it wasn't that but it didn't work either. So either the microcontroller is still messed up or I am using the software incorrectly. It shouldn't matter how many LEDs are soldered, it's not like I need to add all of them for it to work right?
Post by: ghostjuggernaut on Tue, 13 March 2018, 22:56:44
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Here are a few that don't suck too much, unlike my soldering skills. https://imgur.com/a/ayPKw (https://imgur.com/a/ayPKw) Looking at the photo with zoom, I guess I could try doing a better job, but the pins looks like they are all connected. In case you can't see in the photo, the chip's dot is in the upper left and the RGB LED's marked corner is in the upper right.
Thanks for taking a look Yuktsi. First time doing any SMD work and using bootmapper.
If the 8-pin is the rgb microcontroller then the judging by the fourth pic you might have messed up a trace, but what is more likely judging by the second pic is that a little bit of your solder blob is touching the blob from another pin and shorting out or something
I don't solder keebs in particular so afaik it's the second problem I listed which is very common
Thanks for the suggestion. I tried to clean up the RGB microcontroller as best I could, making sure none of the pins were connected with a random solder bridge. Using a 3x lens it looked alright. I added another LED to be sure it wasn't that but it didn't work either. So either the microcontroller is still messed up or I am using the software incorrectly. It shouldn't matter how many LEDs are soldered, it's not like I need to add all of them for it to work right?
I cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Post by: vtachkov on Tue, 13 March 2018, 23:28:23
Quote
I cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Post by: ghostjuggernaut on Tue, 13 March 2018, 23:39:37
QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
I could be wrong, idk how the pcb is designed. But if you have the time and components it may be worth a shot.
Post by: yuktsi on Wed, 14 March 2018, 03:50:19
Hi there, the RGB LEDs are all connected in a series circuit. The LED that you soldered won't light up until all the LEDs before it is soldered. The first LEDs is located under the "7&" key, and the rest goes in clock-wise.QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Thanks.
Post by: kawasaki161 on Wed, 14 March 2018, 06:07:31
Post by: vtachkov on Wed, 14 March 2018, 20:14:14
Hi there, the RGB LEDs are all connected in a series circuit. The LED that you soldered won't light up until all the LEDs before it is soldered. The first LEDs is located under the "7&" key, and the rest goes in clock-wise.QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Thanks.
That worked! I soldered the RGB LED under the 7 key and when I plugged it in it lit up using the color I set in bootmapper. Looks like I know what I'll be doing the rest of tonight :) Thanks again.
Post by: ghostjuggernaut on Wed, 14 March 2018, 21:10:07
Hi there, the RGB LEDs are all connected in a series circuit. The LED that you soldered won't light up until all the LEDs before it is soldered. The first LEDs is located under the "7&" key, and the rest goes in clock-wise.QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Thanks.
That worked! I soldered the RGB LED under the 7 key and when I plugged it in it lit up using the color I set in bootmapper. Looks like I know what I'll be doing the rest of tonight :) Thanks again.
Glad to hear that was the issue. When i was building my TX1800 I had an issue with one of the first led's in the series and couldnt for the life of me figure out what the problem was. Always nice when the fix is somewhat simple :)
Post by: vtachkov on Wed, 14 March 2018, 21:32:09
Hi there, the RGB LEDs are all connected in a series circuit. The LED that you soldered won't light up until all the LEDs before it is soldered. The first LEDs is located under the "7&" key, and the rest goes in clock-wise.QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Thanks.
That worked! I soldered the RGB LED under the 7 key and when I plugged it in it lit up using the color I set in bootmapper. Looks like I know what I'll be doing the rest of tonight :) Thanks again.
Glad to hear that was the issue. When i was building my TX1800 I had an issue with one of the first led's in the series and couldnt for the life of me figure out what the problem was. Always nice when the fix is somewhat simple :)
When I finished the last one, it, along with the one on the front refused to turn on. Of course I only set 17 LEDs instead of 19 in the config. Once I updated that everything worked perfectly. Thanks for helping me work through this.
Post by: vtachkov on Thu, 15 March 2018, 16:47:41
(https://imgur.com/J7XR435.png)
(https://imgur.com/lNiziDV.png)
(https://imgur.com/PpD3pcn.png)
(https://imgur.com/LPntnzU.png)
Post by: p_blaze on Thu, 15 March 2018, 16:56:00
I can't stop giggling like a little girl.Beautiful.Show Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
Post by: Sissy on Thu, 15 March 2018, 21:00:52
I can't stop giggling like a little girl.StunningShow Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
Post by: yuktsi on Thu, 15 March 2018, 23:55:47
I can't stop giggling like a little girl.what switches are those? The 9009 goes surprisingly well with the black case.Show Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
Post by: vtachkov on Fri, 16 March 2018, 00:33:49
I can't stop giggling like a little girl.what switches are those? The 9009 goes surprisingly well with the black case.Show Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
Ergo clears in BSUN brown housings, with tribosys lube and black poly films. Still a little scratchy though, gotta get better at lubing. Unfortunately I couldn't get my hands on any pandas so I made the next best thing I could think of.
I wasn't sure I'd like the 9009 but I totally agree. I might swap it out for solarized dark when I finally get it.
Post by: Puddsy on Fri, 16 March 2018, 00:37:34
I can't stop giggling like a little girl.what switches are those? The 9009 goes surprisingly well with the black case.Show Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
Ergo clears in BSUN brown housings, with tribosys lube and black poly films. Still a little scratchy though, gotta get better at lubing. Unfortunately I couldn't get my hands on any pandas so I made the next best thing I could think of.
I wasn't sure I'd like the 9009 but I totally agree. I might swap it out for solarized dark when I finally get it.
THAT'S MY BOY
GOOD SWITCH CHOICE
think i'm gonna crack mine open and put films and lube soon
Post by: breckstar on Fri, 16 March 2018, 09:43:23
Post by: yuktsi on Fri, 16 March 2018, 11:46:23
Any way to get the acrylic mid layer post GB?I can send you the fie for you, and you may get someone to get it cut for you.
Post by: breckstar on Fri, 16 March 2018, 13:36:24
That would be awesome!Any way to get the acrylic mid layer post GB?I can send you the fie for you, and you may get someone to get it cut for you.
Post by: lunr on Fri, 16 March 2018, 20:31:22
Post by: fublamchu on Sat, 17 March 2018, 16:16:55
Sent from my SM-G930P using Tapatalk
Post by: finalarcadia on Sun, 18 March 2018, 00:16:01
Post by: finalarcadia on Sun, 18 March 2018, 13:12:56
(https://i.imgur.com/fr61wOh.jpg)
(https://i.imgur.com/1cMNmLE.jpg)
(https://i.imgur.com/QiQU3Kp.jpg)
(https://i.imgur.com/eNxFjEj.jpg)
(https://i.imgur.com/5iilUyY.jpg)
Post by: LightningXI on Sun, 18 March 2018, 13:21:35
The promised pics:Amazing.Show Image(https://i.imgur.com/fr61wOh.jpg)Show Image(https://i.imgur.com/1cMNmLE.jpg)Show Image(https://i.imgur.com/QiQU3Kp.jpg)Show Image(https://i.imgur.com/eNxFjEj.jpg)Show Image(https://i.imgur.com/5iilUyY.jpg)
Sent from my mobile using Tapatalk
Post by: LDobler on Sun, 18 March 2018, 15:19:25
Post by: SixtyLife on Sun, 18 March 2018, 18:18:37
The promised pics:ffff that looks goodShow Image(https://i.imgur.com/fr61wOh.jpg)Show Image(https://i.imgur.com/1cMNmLE.jpg)Show Image(https://i.imgur.com/QiQU3Kp.jpg)Show Image(https://i.imgur.com/eNxFjEj.jpg)Show Image(https://i.imgur.com/5iilUyY.jpg)
Post by: funderburker on Mon, 19 March 2018, 02:55:26
The promised pics:Show Image(https://i.imgur.com/fr61wOh.jpg)Show Image(https://i.imgur.com/1cMNmLE.jpg)Show Image(https://i.imgur.com/QiQU3Kp.jpg)Show Image(https://i.imgur.com/eNxFjEj.jpg)Show Image(https://i.imgur.com/5iilUyY.jpg)
Wooah, call the fire department, this board is is on fire! How the hype persons say it - LIT! :thumb:
Post by: luumii on Tue, 20 March 2018, 01:47:47
Post by: yuktsi on Tue, 20 March 2018, 09:55:51
Sent you a PM Yuktsi.Ok, thanks.
Have EU orders started going out yet? :)Yeah. I am updating the tracking now.
Post by: kawasaki161 on Tue, 20 March 2018, 10:35:06
Post by: Shoah on Fri, 23 March 2018, 07:51:02
Post by: seblove on Fri, 23 March 2018, 10:18:40
[attachimg=1]
Post by: dyrdevil on Fri, 23 March 2018, 22:24:56
Post by: yuktsi on Fri, 23 March 2018, 22:30:33
Hi Yuktsi, sent you a pm few days ago:)Hi, I didn't receive any email nor PM from you. Do you mind to send it again?
Post by: Weiss on Sat, 24 March 2018, 03:23:52
Lo and behold, I guess my RGB kit was already soldered onto one of my PCBs, I can only assume thanks to Yuktsi. Thanks!
I'm just waiting on some parts to come in, then this board will be getting built. :)
Post by: xeniality on Sat, 24 March 2018, 17:29:14
I've seen that profile picture somewhere!
Post by: yonghf on Mon, 26 March 2018, 11:07:54
Sent you a PM few days back.
Post by: yuktsi on Mon, 26 March 2018, 13:40:24
Thank you.
Post by: Weiss on Mon, 26 March 2018, 20:29:54
Wait a second Weiss...
I've seen that profile picture somewhere!
Well you're either a degenerate like myself, or you're in slack with me, or you have weird friends. ;)
Post by: romeo on Mon, 26 March 2018, 21:18:57
Post by: Puddsy on Tue, 27 March 2018, 16:45:35
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
Post by: yuktsi on Tue, 27 March 2018, 22:26:17
Thanks.
Post by: SolidCactus on Wed, 28 March 2018, 07:55:19
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
A second round would be awesome! Please count me in!
Post by: DALExSNAIL on Wed, 28 March 2018, 08:04:04
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
A second round would be awesome! Please count me in!
Would technically be a third.
Post by: SolidCactus on Wed, 28 March 2018, 09:14:11
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
A second round would be awesome! Please count me in!
Would technically be a third.
I’m happy with whatever iteration it would be!
Post by: DALExSNAIL on Wed, 28 March 2018, 11:59:59
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
A second round would be awesome! Please count me in!
Would technically be a third.
I’m happy with whatever iteration it would be!
Fair enough lol :) :)
Post by: tokidokijake on Thu, 29 March 2018, 22:06:05
Post by: heckenjoni on Fri, 30 March 2018, 08:24:57
Post by: fublamchu on Fri, 30 March 2018, 09:17:26
Post by: Puddsy on Fri, 30 March 2018, 11:19:40
are there any tgr 910 ce extras ?
no
Post by: kawasaki161 on Thu, 05 April 2018, 08:40:15
Post by: Shoah on Thu, 05 April 2018, 08:43:35
Anyone in Europe got theirs yet? Mine seems to be stuck in UK customs since the 31st :(Mine arrived today. Took a total of 12 days. Went through customs in 2 days though.
Post by: avid on Thu, 05 April 2018, 11:25:01
Post by: Shoah on Thu, 05 April 2018, 11:26:25
What carrier is used? Can't find any tracking with my tracking nr.I put it in the AfterShip tracker and it auto-recognized it. Might work for you as well.
Post by: avid on Thu, 05 April 2018, 11:27:27
What carrier is used? Can't find any tracking with my tracking nr.I put it in the AfterShip tracker and it auto-recognized it. Might work for you as well.
Used that as well, got a list of 25 different carriers and not one of them tracks it.
https://imgur.com/a/YsW3v
Post by: Shoah on Thu, 05 April 2018, 11:28:21
Mine says Malaysia Post EMS / Pos Laju.What carrier is used? Can't find any tracking with my tracking nr.I put it in the AfterShip tracker and it auto-recognized it. Might work for you as well.
Used that as well, got a list of 25 different carriers and not one of them tracks it.
Post by: heckenjoni on Thu, 05 April 2018, 13:01:14
Post by: LightningXI on Thu, 05 April 2018, 13:02:19
can anyone tell me if there will be a GB for the 910 ce polycarb or will it not happen ? and is there an estimated time date for the 910 ce polycarb GB ?Yuktsi asked for PM's a while back, so that boat has already sailed unfortunately.
Sent from my mobile using Tapatalk
Post by: heckenjoni on Thu, 05 April 2018, 13:12:19
can anyone tell me if there will be a GB for the 910 ce polycarb or will it not happen ? and is there an estimated time date for the 910 ce polycarb GB ?Yuktsi asked for PM's a while back, so that boat has already sailed unfortunately.
Sent from my mobile using Tapatalk
ah so i missed it ? anyone knows how many are made ?
Post by: smittysteve on Thu, 05 April 2018, 13:13:39
can anyone tell me if there will be a GB for the 910 ce polycarb or will it not happen ? and is there an estimated time date for the 910 ce polycarb GB ?Yuktsi asked for PM's a while back, so that boat has already sailed unfortunately.
Sent from my mobile using Tapatalk
ah so i missed it ? anyone knows how many are made ?
Pretty sure he did 20. :thumb:
Post by: kawasaki161 on Thu, 05 April 2018, 17:28:08
What carrier is used? Can't find any tracking with my tracking nr.Mine was shipped via SF-Express, their tracking is trash though. It always has one of the following problems: tracking server down; can't load captcha; the whole site is down.
Mine arrived today. Took a total of 12 days. Went through customs in 2 days though.Okay thanks, guess I'll wait and pray.
Post by: vegs on Fri, 06 April 2018, 08:26:01
Try 17track.net, that works fine for meWhat carrier is used? Can't find any tracking with my tracking nr.Mine was shipped via SF-Express, their tracking is trash though. It always has one of the following problems: tracking server down; can't load captcha; the whole site is down.Mine arrived today. Took a total of 12 days. Went through customs in 2 days though.Okay thanks, guess I'll wait and pray.
Post by: lunr on Fri, 06 April 2018, 19:10:03
Post by: kawasaki161 on Wed, 11 April 2018, 05:29:29
I wonder what's going on there, the last time I got something via sf express they called me a day after it landed in the UK.
Post by: yuktsi on Wed, 11 April 2018, 06:09:44
14 days since it was shipped and 11 days since it arrived at UK customs now :(Hmmmm. Will check with SF Malaysia tmr.
I wonder what's going on there, the last time I got something via sf express they called me a day after it landed in the UK.
Sent from my iPhone using Tapatalk
Post by: kawasaki161 on Wed, 11 April 2018, 06:49:44
Thanks14 days since it was shipped and 11 days since it arrived at UK customs now :(Hmmmm. Will check with SF Malaysia tmr.
I wonder what's going on there, the last time I got something via sf express they called me a day after it landed in the UK.
Sent from my iPhone using Tapatalk
Post by: nastrovje on Wed, 11 April 2018, 07:42:38
Even though the grey isn't exactly grey, it turned out to look stunning. :cool:
Post by: vegs on Thu, 12 April 2018, 15:57:57
Post by: SixtyLife on Thu, 12 April 2018, 18:40:52
Post by: luumii on Fri, 13 April 2018, 00:24:28
Post by: heckenjoni on Sat, 14 April 2018, 17:24:47
Post by: Shoah on Sun, 15 April 2018, 13:10:49
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
Post by: Puddsy on Sun, 15 April 2018, 13:22:34
Has anyone tried putting holtites into the pcb? Or does know if these will work:
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
i always advise against them, i've had nothing but bad experiences with them, and it's faster to just solder switches in and commit instead of being non-committal
Post by: kawasaki161 on Sun, 15 April 2018, 13:42:06
Would you guys advise against holtites in the first place? And if so why?It's cheaper to buy a chinese desoldering station like the ZD-915 than it is to equip 2 boards with holtites and the chinese desoldering station will even work on all of your boards.
Post by: Shoah on Sun, 15 April 2018, 13:42:56
Thats a great idea actually, thanks for the recommendation.Would you guys advise against holtites in the first place? And if so why?It's cheaper to buy a chinese desoldering station like the ZD-915 than it is to equip 2 boards with holtites and the chinese desoldering station will even work on all of your boards.
Post by: LDobler on Sun, 15 April 2018, 15:47:24
Cheers
Post by: kawasaki161 on Mon, 16 April 2018, 04:30:21
14 days since it was shipped and 11 days since it arrived at UK customs now :(Hmmmm. Will check with SF Malaysia tmr.
I wonder what's going on there, the last time I got something via sf express they called me a day after it landed in the UK.
Sent from my iPhone using Tapatalk
Any news yet?
Post by: nastrovje on Mon, 16 April 2018, 08:13:29
Has anyone tried putting holtites into the pcb? Or does know if these will work:
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
i always advise against them, i've had nothing but bad experiences with them, and it's faster to just solder switches in and commit instead of being non-committal
Give that man some info. Why do you think so? Why do you post a comment without content?
I advise against reading Puddsy's posts at this point.
Post by: Puddsy on Mon, 16 April 2018, 10:00:31
Has anyone tried putting holtites into the pcb? Or does know if these will work:
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
i always advise against them, i've had nothing but bad experiences with them, and it's faster to just solder switches in and commit instead of being non-committal
Give that man some info. Why do you think so? Why do you post a comment without content?
I advise against reading Puddsy's posts at this point.
it takes 1 hour to solder/desolder/resolder a keyboard of this size at most if you have a desoldering iron
it took me 4 kinds, and 5 hours to install holtites on a 60% because the holtite compatibility spreadsheet is a lying piece of ****
and then i liked the first switches i put in it so it didn't matter
that was just the first time i tried them, it's only gone downhill from there
Post by: Koobaczech on Mon, 16 April 2018, 10:13:01
Post by: heckenjoni on Tue, 24 April 2018, 10:14:12
Post by: LightningXI on Tue, 24 April 2018, 12:39:41
It's easy to say that Holtites are not the best idea once you have tried a few of them at least. With the way they stick out at the bottom of the PCB after insertion, it's more than likely that movement shock, a small push while assembling, and other possibilities would dislodge a Holtite rather easily. It works for some people, but frankly, it's one of those things that wasn't created to be optimal for the PCBs we work with. I tried some on my Zeal60, where they would arguably fit perfectly. They do fit well, but it was far too easy to take them off. With that kind of stability, I would rather commit to a switch choice and simply desolder when the time comes to make a big change.Has anyone tried putting holtites into the pcb? Or does know if these will work:
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
i always advise against them, i've had nothing but bad experiences with them, and it's faster to just solder switches in and commit instead of being non-committal
Give that man some info. Why do you think so? Why do you post a comment without content?
I advise against reading Puddsy's posts at this point.
Sent from my mobile using Tapatalk
Post by: megaforce on Tue, 24 April 2018, 17:43:46
Just get a desoldering pump or wick.
Post by: futurecrime on Tue, 24 April 2018, 20:23:01
Also, desoldering ain't so bad.
Post by: amnesia0287 on Tue, 24 April 2018, 21:27:37
Post by: CornCha0s on Thu, 26 April 2018, 03:25:49
Post by: kawasaki161 on Thu, 26 April 2018, 05:04:04
Sent you a PM regarding shipping problems yuktsi
Oh, is yours stuck in the UK too? Mine didn't move since the 31st feelsbadman
Post by: CornCha0s on Thu, 26 April 2018, 05:28:01
Sent you a PM regarding shipping problems yuktsi
Oh, is yours stuck in the UK too? Mine didn't move since the 31st feelsbadman
Customs clearance was pretty fast, but it seems like my package got rerouted to France.
Post by: kawasaki161 on Thu, 26 April 2018, 06:02:28
Customs clearance was pretty fast, but it seems like my package got rerouted to France.
Oh nice(the customs bit at least), did you get a call from DPD for customs clearance? I got one within one day after it arrived in the UK the last time I got something via SF express, nothing this time though.
tbh I'm starting to lose faith in ever seeing that board :(
Post by: heckenjoni on Thu, 26 April 2018, 07:42:09
Post by: fublamchu on Thu, 26 April 2018, 08:41:34
Sent from my SM-G930P using Tapatalk
Post by: CornCha0s on Thu, 26 April 2018, 10:03:05
Oh nice(the customs bit at least), did you get a call from DPD for customs clearance? I got one within one day after it arrived in the UK the last time I got something via SF express, nothing this time though.
tbh I'm starting to lose faith in ever seeing that board :(
Got a SMS from them a day after it landed in London where they asked me to pay the fee. Someone else from Germany has the exact same problem you do. DPD customer service basically told me tho that from their experience it's likely that it won't arrive :(
Post by: kawasaki161 on Thu, 26 April 2018, 12:57:51
Got a SMS from them a day after it landed in London where they asked me to pay the fee. Someone else from Germany has the exact same problem you do. DPD customer service basically told me tho that from their experience it's likely that it won't arrive :(
Oh great, I gave them my landline number (because that's the one where there's always someone who can accept the call), they can send as many sms as they want to that. :(
Post by: kawasaki161 on Fri, 27 April 2018, 04:49:42
Just got an e-mail from cccollect (the DPD customs thingy) to my paypal email address. Apparently it (the e-mail) was already sent on the 4th of april but never arrived? Either way HYPED.
Post by: Puddsy on Fri, 27 April 2018, 12:33:50
HOLY ****.
Just got an e-mail from cccollect (the DPD customs thingy) to my paypal email address. Apparently it was already sent on the 4th of april but never arrived? Either way HYPED.
that's pretty dope
Post by: lunr on Fri, 27 April 2018, 15:19:28
Post by: DALExSNAIL on Fri, 27 April 2018, 20:55:25
Will take better pics tomorrow, when there's some sun.
[attachimg=1]
[attachimg=2]
Post by: romevi on Fri, 27 April 2018, 21:06:23
She finally landed.
Will take better pics tomorrow, when there's some sun.
No one cares.
Post by: DALExSNAIL on Fri, 27 April 2018, 21:07:26
She finally landed.
Will take better pics tomorrow, when there's some sun.
No one cares.
:(
Post by: xondat on Fri, 27 April 2018, 21:18:32
She finally landed.
Will take better pics tomorrow, when there's some sun.
(Attachment Link)
(Attachment Link)
nice
Post by: Sissy on Fri, 27 April 2018, 21:37:44
Post by: SixtyLife on Fri, 27 April 2018, 22:19:18
She finally landed.ffffff wow silver's the best
Will take better pics tomorrow, when there's some sun.
(Attachment Link)
(Attachment Link)
Post by: Puddsy on Sat, 28 April 2018, 11:01:30
She finally landed.
Will take better pics tomorrow, when there's some sun.
(Attachment Link)
(Attachment Link)
damn, silver is the best color for keyboards
nice
that's my line
Post by: xondat on Sat, 28 April 2018, 11:16:26
nice
that's my line
someone's got to do it :)) :))
Post by: DALExSNAIL on Sat, 28 April 2018, 13:24:55
(https://farm1.staticflickr.com/866/26894009177_78b6e664be_z.jpg) (https://flic.kr/p/GYwPXp)
(https://farm1.staticflickr.com/960/41044390354_d535fcb222_k.jpg) (https://flic.kr/p/25wXehE)
Post by: clasicks on Sat, 28 April 2018, 13:31:49
Show Image
Crosspost, but fug it
(https://farm1.staticflickr.com/866/26894009177_78b6e664be_z.jpg) (https://flic.kr/p/GYwPXp)
(https://farm1.staticflickr.com/960/41044390354_d535fcb222_k.jpg) (https://flic.kr/p/25wXehE)
excellent
Post by: romevi on Sat, 28 April 2018, 13:36:29
Show ImageCrosspost, but fug it
(https://farm1.staticflickr.com/866/26894009177_78b6e664be_z.jpg) (https://flic.kr/p/GYwPXp)
(https://farm1.staticflickr.com/960/41044390354_d535fcb222_k.jpg) (https://flic.kr/p/25wXehE)
excellent
More like sexcellent.
Post by: kawasaki161 on Wed, 02 May 2018, 03:52:52
Pics later after I've calmed down.
Post by: Sissy on Wed, 02 May 2018, 03:58:36
Ahhhhhh finally got it. **** whatever happened at UK customs, but whatever the board is flawless (if a bit dusty lol).great to hear, look forward to pictures
Pics later after I've calmed down.
Post by: fublamchu on Sun, 06 May 2018, 15:15:03
Post by: Krytone on Tue, 08 May 2018, 01:11:48
Post by: romevi on Tue, 08 May 2018, 01:39:00
Just received my 910 poly this morning! Will post pic later after work ^-^:/
Post by: Krytone on Tue, 08 May 2018, 02:17:23
(https://media.giphy.com/media/s3Zug4SSIPt6M/giphy.gif)Just received my 910 poly this morning! Will post pic later after work ^-^:/
Post by: funderburker on Tue, 08 May 2018, 05:30:54
Just received my 910 poly this morning! Will post pic later after work ^-^
(https://media.giphy.com/media/EiQLm3oGy8Jd6/giphy.gif)
Post by: pr0ximity on Tue, 08 May 2018, 06:01:03
Just received my 910 poly this morning! Will post pic later after work ^-^
(https://media.tenor.com/images/855bee8aa3bac882fa18ad9ee3cbc506/tenor.gif)
Post by: Krytone on Tue, 08 May 2018, 11:06:11
(https://i.imgur.com/ZksecPj.jpg)
(https://i.imgur.com/WiGbP7L.jpg)
(https://i.imgur.com/JPmVi6d.jpg)
(https://i.imgur.com/4MpAe7l.jpg)
(https://i.imgur.com/hX4JnEn.jpg)
Post by: vegs on Tue, 08 May 2018, 11:09:05
god damnShow Image(https://i.imgur.com/nCEOnSt.jpg)Show Image(https://i.imgur.com/ZksecPj.jpg)Show Image(https://i.imgur.com/WiGbP7L.jpg)Show Image(https://i.imgur.com/JPmVi6d.jpg)Show Image(https://i.imgur.com/4MpAe7l.jpg)Show Image(https://i.imgur.com/hX4JnEn.jpg)
Post by: romevi on Tue, 08 May 2018, 11:15:44
Show Image(https://i.imgur.com/nCEOnSt.jpg)Show Image(https://i.imgur.com/ZksecPj.jpg)Show Image(https://i.imgur.com/WiGbP7L.jpg)Show Image(https://i.imgur.com/JPmVi6d.jpg)Show Image(https://i.imgur.com/4MpAe7l.jpg)Show Image(https://i.imgur.com/hX4JnEn.jpg)
:eek: :eek: :eek: :eek: :eek:
Can't wait until I'm able to get mine.
:eek: :eek: :eek: :eek: :eek:
Post by: zekkin on Tue, 08 May 2018, 12:15:51
Show Image(https://i.imgur.com/nCEOnSt.jpg)Show Image(https://i.imgur.com/ZksecPj.jpg)Show Image(https://i.imgur.com/WiGbP7L.jpg)Show Image(https://i.imgur.com/JPmVi6d.jpg)Show Image(https://i.imgur.com/4MpAe7l.jpg)Show Image(https://i.imgur.com/hX4JnEn.jpg)
Wow. Looks absolutely stunning.
I can't wait to get mine :p
Post by: amnesia0287 on Tue, 08 May 2018, 12:36:53
Just received my 910 poly this morning! Will post pic later after work ^-^
Did yours ship early/are you close? Or is the shipping just super fast?
Post by: romevi on Tue, 08 May 2018, 12:43:58
Just received my 910 poly this morning! Will post pic later after work ^-^
Did yours ship early/are you close? Or is the shipping just super fast?
They're both in Malaysia.
Post by: pr0ximity on Tue, 08 May 2018, 19:36:51
Post by: Krytone on Tue, 08 May 2018, 21:43:24
Yeah, i picked it up myself from yuktsi. One benefit of living close by ^-^Just received my 910 poly this morning! Will post pic later after work ^-^
Did yours ship early/are you close? Or is the shipping just super fast?
They're both in Malaysia.
Post by: LDobler on Thu, 17 May 2018, 10:56:40
Post by: dgneo on Thu, 17 May 2018, 10:59:49
Post by: romevi on Thu, 17 May 2018, 11:42:48
Very excited for the PC 910 to ship :)
:)
Post by: pr0ximity on Thu, 17 May 2018, 20:51:01
Very excited for the PC 910 to ship :)
A batch allegedly went out a couple of days ago. Haven't heard about tracking yet.
Post by: dgneo on Thu, 31 May 2018, 12:16:51
Post by: zekkin on Thu, 31 May 2018, 12:20:01
woo just got tracking for my 910 PC, however i don't recognize the number. assuming aramex?Yep it's aramex. Make sure to sign up for UPS my choice to get the UPS tracking once it hits their system. This is what I did for my polycarb Singa shipment and it worked perfectly.
Post by: pr0ximity on Thu, 31 May 2018, 17:33:45
Shipping was fantastic, super quick and the board was snug as a bug. Takes a little doing to line up the top and bottom halves of the case since they flex a bit, but it's doable if you take your time.
Post by: reconsiderit on Sat, 02 June 2018, 18:17:45
(https://i.imgur.com/QXtAdJM.jpg)
(https://i.imgur.com/fxImIyr.jpg)
(https://i.imgur.com/FCWvMy2.jpg)
(https://i.imgur.com/kam6ZTx.jpg)
Post by: OmegaSupreme on Sat, 02 June 2018, 18:51:48
Built mine up on Thursday and had some pictures that I wanted to share. The switches were super tight going into the plate but in the end everything worked out fine. Also, anyone have an additional plate that they wanna get rid of by any chance?Show Image(https://i.imgur.com/QXtAdJM.jpg)Show Image(https://i.imgur.com/fxImIyr.jpg)Show Image(https://i.imgur.com/FCWvMy2.jpg)Show Image(https://i.imgur.com/kam6ZTx.jpg)
Man that board looks sweet!
Post by: Puddsy on Sat, 02 June 2018, 19:50:52
Built mine up on Thursday and had some pictures that I wanted to share. The switches were super tight going into the plate but in the end everything worked out fine. Also, anyone have an additional plate that they wanna get rid of by any chance?Show Image(https://i.imgur.com/QXtAdJM.jpg)Show Image(https://i.imgur.com/fxImIyr.jpg)Show Image(https://i.imgur.com/FCWvMy2.jpg)Show Image(https://i.imgur.com/kam6ZTx.jpg)
What switches?
And your "2" key isn't all the way on.
Post by: reconsiderit on Sat, 02 June 2018, 19:56:19
Built mine up on Thursday and had some pictures that I wanted to share. The switches were super tight going into the plate but in the end everything worked out fine. Also, anyone have an additional plate that they wanna get rid of by any chance?Show Image(https://i.imgur.com/QXtAdJM.jpg)Show Image(https://i.imgur.com/fxImIyr.jpg)Show Image(https://i.imgur.com/FCWvMy2.jpg)Show Image(https://i.imgur.com/kam6ZTx.jpg)
What switches?
And your "2" key isn't all the way on.
Threw in some zeal 67g tactiles for everything but the space which is a 67g with a RT MX black stem.
I've thrown some different keycaps on. Got rid of the accents and threw on the dark blue pipe. Probably gonna put honeywell on the thing when it comes in.
Post by: Koojahyung on Sun, 03 June 2018, 04:52:16
Was there any GB???how much is it?
Post by: ihalatch on Sun, 03 June 2018, 04:55:32
Post by: zekkin on Sun, 03 June 2018, 06:13:16
I got mine last week. My PCB came with the RGB SMDs unsoldered? I wasn't aware that we have to solder them.I remember getting an email from yuktsi awhile ago saying they'd come separate and he'd solder them on for you if you requested it. I requested it but never got a response so fingers crossed!
Post by: ihalatch on Sun, 03 June 2018, 08:12:05
****, I missed that one :)I got mine last week. My PCB came with the RGB SMDs unsoldered? I wasn't aware that we have to solder them.I remember getting an email from yuktsi awhile ago saying they'd come separate and he'd solder them on for you if you requested it. I requested it but never got a response so fingers crossed!
Post by: kmba on Sun, 03 June 2018, 11:20:40
looks so very nice polycarbon! how can I get TGR910re??
Was there any GB???how much is it?
There was a very small private group buy for the polycarbonate boards several months back. Priced similarly to the aluminum version.
Post by: pr0ximity on Sun, 03 June 2018, 14:31:00
****, I missed that one :)I got mine last week. My PCB came with the RGB SMDs unsoldered? I wasn't aware that we have to solder them.I remember getting an email from yuktsi awhile ago saying they'd come separate and he'd solder them on for you if you requested it. I requested it but never got a response so fingers crossed!
Be careful not to hold the iron to them for too long, they're very easy to burn (I damaged two, one dead and one just off-colored). The PCB came with a couple extra though.
Post by: reconsiderit on Sun, 03 June 2018, 21:40:10
****, I missed that one :)I got mine last week. My PCB came with the RGB SMDs unsoldered? I wasn't aware that we have to solder them.I remember getting an email from yuktsi awhile ago saying they'd come separate and he'd solder them on for you if you requested it. I requested it but never got a response so fingers crossed!
Also keep in mind that they're connected in a series which means that they'll only work if all the LEDs in the series are connected. Additionally, remember to set up firmware for LEDs so they actually light up when they're connected.
Post by: heckenjoni on Mon, 04 June 2018, 15:03:41
Post by: glack23 on Tue, 05 June 2018, 00:50:09
Sent from my Pixel using Tapatalk
Post by: giangtran19x on Fri, 08 June 2018, 13:35:57
Abit late to the party. Love how the Grey turn outShow Image(https://uploads.tapatalk-cdn.com/20180605/ce7259056c5d56d4f671ff8de320713b.jpg)
Sent from my Pixel using Tapatalk
Is it kind of light grey?
Post by: popkorn62 on Fri, 08 June 2018, 16:23:03
Post by: dgneo on Fri, 08 June 2018, 16:42:02
heh I'm the 0.01% :D :D
same here (if the PC version counts, that is)
Post by: romevi on Fri, 08 June 2018, 17:02:25
heh I'm the 0.01% :D :D
same here (if the PC version counts, that is)
Same-uel Taylor Coleridge.
Post by: pr0ximity on Sat, 09 June 2018, 18:44:34
(https://farm2.staticflickr.com/1721/41801523315_b1fefb1703_b.jpg)
More (https://geekhack.org/index.php?topic=35864.msg2622097#msg2622097)
Post by: dgneo on Mon, 11 June 2018, 07:05:37
aramex wtf u doing m8
edit: apparently movin fast, just got UPS email that it should be here tomorrow
Post by: JJ on Mon, 11 June 2018, 08:36:05
Post by: Sissy on Mon, 11 June 2018, 08:48:49
Mine got a bit funky when it was closer to me, said would be delivered then 2 days later it arrived then 3 days after that the mail service who handled it in Aus phoned me to make sure it arrived.Show Image(https://i.imgur.com/U5zKhvX.png)
aramex wtf u doing m8
edit: apparently movin fast, just got UPS email that it should be here tomorrow
that said it did arrive fast.
Post by: SBN on Mon, 11 June 2018, 08:51:18
Post by: dgneo on Mon, 11 June 2018, 08:59:54
Where did everybody get their tracking number from?
My shipping invoice was updated with the tracking number
Post by: OmegaSupreme on Mon, 11 June 2018, 09:06:23
Not sure the carrier picked it up yet.
Post by: zekkin on Mon, 11 June 2018, 10:29:27
:cool:
Post by: SBN on Mon, 11 June 2018, 11:11:02
Where did everybody get their tracking number from?
My shipping invoice was updated with the tracking number
Ok, thanks! I can't seem to find anything on my transaction...
Post by: amnesia0287 on Mon, 11 June 2018, 12:22:43
Mine is still stuck at "record created" since June 3rd.
Not sure the carrier picked it up yet.
Same same
Post by: dgneo on Fri, 15 June 2018, 09:30:44
Looks like I jinxed it. Scheduled delivery was for the 12th, that came and went with no keyboard, and tracking hasn't updated since the 9th.
Patience is a virtue I guess.
Post by: romevi on Fri, 15 June 2018, 10:13:58
Show Image(https://i.imgur.com/Scaj72A.png)
Looks like I jinxed it. Scheduled delivery was for the 12th, that came and went with no keyboard, and tracking hasn't updated since the 9th.
Patience is a virtue I guess.
I have a different package coming from Malaysia. Took one day to go from Malaysia to LA, and hasn't updated since the 7th. :-\
Post by: zacheadams on Sat, 16 June 2018, 14:18:57
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
Post by: oldcat on Sat, 16 June 2018, 14:25:57
Post by: smittysteve on Sat, 16 June 2018, 14:28:14
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Wow!! Stunning build, man. Congrats!!
Post by: oatmicro on Sun, 17 June 2018, 00:49:12
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi. Weights are cast bismuth, for those wondering.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
what cerakote color is that?
Post by: Puddsy on Sun, 17 June 2018, 11:58:01
any plan for R2 of this ?
doubt it
Post by: reconsiderit on Sun, 17 June 2018, 19:50:20
any plan for R2 of this ?
doubt it
TM is running a 910 at some point (probably not soon) but won't have a blocker to my knowledge.
Post by: zacheadams on Mon, 18 June 2018, 12:44:52
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi. Weights are cast bismuth, for those wondering.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
what cerakote color is that?
light grey (not cerakoted by yuktsi, done at a shop in northern virginia)
Post by: zekkin on Mon, 18 June 2018, 12:48:07
(https://cdn.discordapp.com/attachments/358532590107623424/457925024570015754/IMG_20180617_100944.jpg)
And a typing test to accompany it...
Post by: oatmicro on Mon, 18 June 2018, 13:44:38
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi. Weights are cast bismuth, for those wondering.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
what cerakote color is that?
light grey (not cerakoted by yuktsi, done at a shop in northern virginia)
nice, I want to try it!
could you tell me the color code please?
Post by: dgneo on Mon, 18 June 2018, 14:01:26
Show Image(https://i.imgur.com/Scaj72A.png)
Looks like I jinxed it. Scheduled delivery was for the 12th, that came and went with no keyboard, and tracking hasn't updated since the 9th.
Patience is a virtue I guess.
Spoke to UPS, looks like the shipper needs to put a trace on the package.
PM'd you Yuktsi.
Post by: theillumedpanda on Mon, 18 June 2018, 15:30:22
Post by: Randalljai on Tue, 19 June 2018, 01:32:16
Post by: Puddsy on Tue, 19 June 2018, 09:22:22
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Post by: Randalljai on Tue, 19 June 2018, 11:25:27
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
Post by: Puddsy on Tue, 19 June 2018, 11:27:53
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
Post by: Randalljai on Tue, 19 June 2018, 11:40:39
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
Sounds good to me...I'll be on the lookout for these...
Post by: romevi on Tue, 19 June 2018, 11:41:46
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
Post by: Randalljai on Tue, 19 June 2018, 11:55:16
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
Post by: vegs on Tue, 19 June 2018, 11:57:51
https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
Post by: Randalljai on Tue, 19 June 2018, 12:37:09
https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
Post by: zacheadams on Tue, 19 June 2018, 14:00:39
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi. Weights are cast bismuth, for those wondering.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
what cerakote color is that?
light grey (not cerakoted by yuktsi, done at a shop in northern virginia)
nice, I want to try it!
could you tell me the color code please?
I'm sorry, I have no idea what the color code is for it :(
Post by: Puddsy on Tue, 19 June 2018, 16:10:13
https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
Post by: donut_sauce on Tue, 19 June 2018, 16:41:34
https://www.typemachina.com/work/
Post by: romevi on Tue, 19 June 2018, 16:42:50
https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
But I found it on Google.
Post by: Puddsy on Tue, 19 June 2018, 17:25:17
must have been updated thenMoreBut I found it on Google.https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
i didn't look
Post by: Randalljai on Tue, 19 June 2018, 17:42:06
must have been updated thenMoreBut I found it on Google.https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
i didn't look
could be. last time i saw a reference to the site was a few months ago. thought it was some super secret website lol
Post by: Puddsy on Tue, 19 June 2018, 17:57:32
must have been updated thenMoreBut I found it on Google.https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
i didn't look
could be. last time i saw a reference to the site was a few months ago. thought it was some super secret website lol
it's been updated within the last few weeks, i know that they're planning on launching ASAP
Post by: kmba on Wed, 20 June 2018, 06:47:28
Mine hasn’t even shipped as of today. I sent yuktsi a PM a few days ago, but haven’t heard back from him. Maybe he’s still having finals, I don’t know. But I’d like to get mine soon or at least get a statement when he’s going to ship it.
Same. A week or so ago he told me there were a few left to ship but I have no idea when they'll go out.
Post by: LDobler on Wed, 20 June 2018, 06:51:22
I think Sam is very busy at the moment, that's why it takes him a while to reply.
Cheers ☺
Post by: Velvet_Crowe on Mon, 25 June 2018, 21:52:54
Post by: Puddsy on Tue, 26 June 2018, 00:13:39
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
as in RGB LEDs on the bottom or in-switch?
Post by: Velvet_Crowe on Tue, 26 June 2018, 08:45:30
RGB LEDs on the bottom and also for the logoI want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
as in RGB LEDs on the bottom or in-switch?
I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
Post by: yuktsi on Tue, 26 June 2018, 10:02:04
Attiny85 from any ps2avrGB PCB should work with the 910RGB LEDs on the bottom and also for the logoI want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
as in RGB LEDs on the bottom or in-switch?
I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
Post by: Sissy on Tue, 26 June 2018, 23:28:50
Post by: dgneo on Wed, 27 June 2018, 06:55:22
(https://i.imgur.com/dfGjeiP.jpg)
Arrived safe and sound :)
Post by: theillumedpanda on Wed, 27 June 2018, 08:41:40
That looks very cool. Patiently wating for mine.Show Image(https://i.imgur.com/i3vqYfy.jpg)Show Image(https://i.imgur.com/dfGjeiP.jpg)
Arrived safe and sound :)
Post by: Artemisia254 on Wed, 27 June 2018, 13:50:47
can you update some news about the PC version :) ?Attiny85 from any ps2avrGB PCB should work with the 910RGB LEDs on the bottom and also for the logoI want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
as in RGB LEDs on the bottom or in-switch?
I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
Post by: Velvet_Crowe on Thu, 28 June 2018, 00:55:03
Post by: dallman5 on Thu, 28 June 2018, 01:11:30
anyone know how/where i can get a polycarb plate made for this
I’d also be interested.
I messaged yuktsi about this a while back because I saw a PC plate in a picture with the rest of the PC boards, but he told me is that he only prototyped a few.
Post by: Jkush463 on Fri, 29 June 2018, 14:16:57
Post by: romevi on Fri, 29 June 2018, 14:18:29
Some one sell me one of these lol
Make a classifieds for one.
Post by: ihalatch on Mon, 02 July 2018, 05:29:19
(http://i.imgur.com/qamobUF.jpg) (https://imgur.com/qamobUF)
(http://i.imgur.com/yt02qdA.jpg) (https://imgur.com/yt02qdA)
(http://i.imgur.com/cTqSOlE.jpg) (https://imgur.com/cTqSOlE)
Post by: futurecrime on Mon, 02 July 2018, 07:10:33
(https://i.imgur.com/SZtVF27.jpg)
(https://i.imgur.com/O5HI8KR.jpg)
(https://i.imgur.com/haMCJKv.jpg)
Post by: Puddsy on Wed, 04 July 2018, 11:03:15
x-post so sorry.Show Image(https://i.imgur.com/SZtVF27.jpg)Show Image(https://i.imgur.com/O5HI8KR.jpg)Show Image(https://i.imgur.com/haMCJKv.jpg)
nice
Post by: PurpleURP on Wed, 04 July 2018, 15:31:12
Post by: Puddsy on Wed, 04 July 2018, 16:02:20
Is there going to be another round?
he has said no
look out for typemachina
Post by: heckenjoni on Fri, 06 July 2018, 07:14:57
Post by: dgneo on Fri, 06 July 2018, 07:17:58
- Brass Plate
- Vintage MX Blacks, Cleaned/Lubed/Polycarb Film
- Clipped/Lubed/Bandaid Stabs
- IMSTO Irish Keyset
(https://i.imgur.com/finsI0P.jpg)
(https://i.imgur.com/dTsF4rw.jpg)
(https://i.imgur.com/QS1NoF1.jpg)
(https://i.imgur.com/eY9A9bO.jpg)
Post by: hippiepete on Sat, 07 July 2018, 17:49:19
Post by: theillumedpanda on Thu, 19 July 2018, 17:44:47
Post by: amnesia0287 on Thu, 19 July 2018, 19:49:48
Which carrier did yuktsi use for your PC 910? While I have a tracking number, AfterShip recognizes it as Canadian Post, which doesn‘t seem to be correct.
The number he provides is aramex, it may convert to something else once it’s in country.
Post by: JubJubCity on Thu, 19 July 2018, 20:13:23
Post by: romevi on Fri, 20 July 2018, 10:23:59
Any one have any issues with the TGR-Elaine pcb having a entire row not work?
What's the TGR Elaine?
Post by: zekkin on Fri, 20 July 2018, 11:16:07
TGR-Elaine is the Singa PCB.Any one have any issues with the TGR-Elaine pcb having a entire row not work?
What's the TGR Elaine?
Post by: Randalljai on Wed, 01 August 2018, 01:20:52
Post by: romevi on Wed, 01 August 2018, 07:19:26
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?
yuktsi might.
Post by: Randalljai on Wed, 01 August 2018, 10:46:40
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?
yuktsi might.
Yeh, I've pmed Yuktsi. Just don't want to be buying a fake or anything :( THank you
Post by: AresTheGod on Sat, 04 August 2018, 16:15:12
Post by: theillumedpanda on Sat, 04 August 2018, 17:28:36
Post by: [Lewynlight] on Sun, 05 August 2018, 06:53:01
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?
Message Kawasaki161 . he can help you.
Post by: AresTheGod on Mon, 06 August 2018, 10:16:57
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?
Message Kawasaki161 . he can help you.
Thank you, just sent him a pm.
Post by: Puddsy on Thu, 09 August 2018, 22:21:45
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?
Message Kawasaki161 . he can help you.
Thank you, just sent him a pm.
you probably just blew up a diode by accident, hope it's nothing major
Post by: maxf on Fri, 10 August 2018, 22:42:53
Sent from my Pixel 2 XL using Tapatalk
Post by: breckstar on Sat, 18 August 2018, 10:27:36
Anyone have a extra RGB kit? Or two?I didn't get the RGB kit but looking for anyone to confirm these are electronics for the RGB kit?
Sent from my Pixel 2 XL using Tapatalk
WS2812B - https://www.sparkfun.com/products/13667
WS2811 - https://www.adafruit.com/product/1378?gclid=CjwKCAjwh9_bBRA_EiwApObaOGsoHfbmq2gEJ308n8FYckjsXerAr6hrP98MvDDzQM1l1AnkQQ2UdxoC-6gQAvD_BwE
Don't really care about the spacer. Just want the 910 lit up.
Anyone mess with cerakoting as well? Looking to do it to mine sometime in the near future.
Edit: Anyone have the 910 plate file?
Post by: vtachkov on Sat, 18 August 2018, 13:18:21
Anyone have a extra RGB kit? Or two?I didn't get the RGB kit but looking for anyone to confirm these are electronics for the RGB kit?
Sent from my Pixel 2 XL using Tapatalk
WS2812B - https://www.sparkfun.com/products/13667
WS2811 - https://www.adafruit.com/product/1378?gclid=CjwKCAjwh9_bBRA_EiwApObaOGsoHfbmq2gEJ308n8FYckjsXerAr6hrP98MvDDzQM1l1AnkQQ2UdxoC-6gQAvD_BwE
Don't really care about the spacer. Just want the 910 lit up.
Anyone mess with cerakoting as well? Looking to do it to mine sometime in the near future.
Edit: Anyone have the 910 plate file?
I can't comment on the component, but just a word of caution. Even if you don't care about the underglow, you'll still have to solder the underglow RGB LEDs because they are in a circuit, or at the very least bridge them, since the 910 logo is the last one in the circuit.
Post by: Mcnos on Thu, 23 August 2018, 00:19:17
Post by: yuktsi on Thu, 23 August 2018, 03:58:30
Just a thought, does anyone know if there's a key combination to flash the PCB for the 910? Mines having issues and won't be recognized by the PC/BootmapperPMed
Post by: Mcnos on Sat, 25 August 2018, 01:56:48
Post by: tokidokijake on Thu, 01 November 2018, 14:43:15
Post by: clasicks on Thu, 01 November 2018, 15:10:37
Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
Post by: tokidokijake on Thu, 01 November 2018, 15:17:25
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?
Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
Post by: clasicks on Thu, 01 November 2018, 15:23:39
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
hrmm, i asked some folks and it looks like its probably the leds (https://i.imgur.com/VjOq2HQ.png) these little guys - remove them from the black and they go on the 4 pin smd pads on the PCB
and this thing (https://i.imgur.com/nux7UNr.png) is the controller for the rgb's that i called a little spider :P
Edit: Rereading your post, I just want to clarify that this is for the BACKLIGHTING. If you want inswitch LED's you dont need any of these things
Post by: Puddsy on Thu, 01 November 2018, 15:37:35
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
Post by: tokidokijake on Thu, 01 November 2018, 15:47:15
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
Post by: Puddsy on Thu, 01 November 2018, 16:08:53
Gotcha. Thank you. And that underglow light is provided by?
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit
if the original buyer didn't order the rgb kit, there is no diffuser
Post by: tokidokijake on Thu, 01 November 2018, 16:42:19
Gotcha. Thank you. And that underglow light is provided by?
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit
if the original buyer didn't order the rgb kit, there is no diffuser
Post by: Puddsy on Thu, 01 November 2018, 16:58:00
Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!Gotcha. Thank you. And that underglow light is provided by?
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit
if the original buyer didn't order the rgb kit, there is no diffuser
and a rgb controller chip
im not sure of part no but i think it's in the op
Post by: tokidokijake on Thu, 01 November 2018, 17:02:28
Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!Gotcha. Thank you. And that underglow light is provided by?
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit
if the original buyer didn't order the rgb kit, there is no diffuser
and a rgb controller chip
im not sure of part no but i think it's in the op
Post by: vonswoopington on Thu, 01 November 2018, 22:29:46
Post by: yuktsi on Thu, 01 November 2018, 23:38:43
Is there any way to buy an additional brass logo insert for the top right corner of the 910 polycarbonate? Does anyone have an extra one they are willing to sell?I will be sending one with dantambok's stuff for you. <3
Post by: vonswoopington on Thu, 01 November 2018, 23:40:02
Is there any way to buy an additional brass logo insert for the top right corner of the 910 polycarbonate? Does anyone have an extra one they are willing to sell?I will be sending one with dantambok's stuff for you. <3
Thank you both!
Post by: gabbbe on Fri, 22 February 2019, 22:41:26
Post by: fleeceman on Sat, 21 September 2019, 18:09:57
Post by: vaughno on Fri, 27 September 2019, 10:23:46
Sent from my iPhone using Tapatalk
Post by: LightningXI on Fri, 27 September 2019, 12:08:55
tgr 910 v2
Sent from my iPhone using Tapatalk
wat
Post by: Auxo on Fri, 27 September 2019, 12:15:40
tgr 910 v2
Sent from my iPhone using Tapatalk
wat
Prime example of a polite way to request an R2 lol
Post by: LightningXI on Fri, 27 September 2019, 12:22:21
tgr 910 v2
Sent from my iPhone using Tapatalk
wat
Prime example of a polite way to request an R2 lol
Thanks for your diagnosis, Dr. Auxo.
Post by: tedkeyboards on Fri, 20 March 2020, 21:12:17
Post by: eyedrop on Sat, 21 March 2020, 12:17:22
Is this ever going to run again?Highly unlikely, but I have been proven wrong. Your best bet would be aftermarket. Good luck!
Sent from my Pixel 3 using Tapatalk
Post by: iNViSiBiLiTi on Wed, 25 March 2020, 21:53:31
Is this ever going to run again?
(https://imgur.com/vgp3JYu)
just remember Sam's ran 910 5 times thus far: R1, SE, CE, RE, VKC.
Post by: merlin64 on Mon, 27 April 2020, 23:35:20
https://config.qmk.fm/#/tgr/910ce/LAYOUT_65_ansi_blocker
VIA support coming shortly!
Post by: oldcat on Tue, 28 April 2020, 00:04:08
910 CE has now been ported to QMK =)
https://config.qmk.fm/#/tgr/910ce/LAYOUT_65_ansi_blocker
VIA support coming shortly!
Amazing, as always!
Post by: merlin64 on Tue, 28 April 2020, 10:58:09
Post by: reconsiderit on Tue, 05 May 2020, 02:25:45
Also, is this the same PCB as R2 RE?
Post by: merlin64 on Fri, 08 May 2020, 12:07:18
Post by: LightningXI on Sat, 09 May 2020, 07:05:09
Is this for the quadcube PCB?It's this PCB:
Also, is this the same PCB as R2 RE?
(https://i.imgur.com/McFa3yL.jpg)
(https://i.imgur.com/DeB6fLn.jpg)
Post by: i_tekneek on Wed, 22 July 2020, 10:36:19