I'm down for it !
Could you just confirm that the case in your last picture (with the keycaps on) is the "Bubinga" wood ?
As someone mentioned, please show available wood options. How about ebony?
Also would like to know if compatible with hasu's apls64 pcb?
Cheers!
I would assume it can fit a poker3?
Is this compatible with the Zeal 60? Interested in the case in Bubinga :thumb:
Is this compatible with the Zeal 60? Interested in the case in Bubinga :thumb:
I imagine they will be compatible, but why opting for the expensive Zeal60 when this case cannot show any underglow lighting at all?
Can we get this without a logo?
Can we get this without a logo?
No unfortunately we can't. This is for identifying our own case so we can follow up when we need be.
Can we get this without a logo?
No unfortunately we can't. This is for identifying our own case so we can follow up when we need be.
Are there any photos of where and how big the logo would be on both the back and the inside?
Is this compatible with the Zeal 60? Interested in the case in Bubinga :thumb:
I imagine they will be compatible, but why opting for the expensive Zeal60 when this case cannot show any underglow lighting at all?
Oh, I just thought of one more thing: feet.
Any chance of getting some recessed circles for rubber bumpons/feet so that the case doesn't slide around (or have the bottom get scratched up)?
Show Image(https://i.pinimg.com/236x/cf/0e/70/cf0e7030a2ab0bcbefb41ef08eb5c6ec--my-lularoe-invoices-sent-lularoe.jpg)
I got mine today, at any rate. :)
Hope the GB is doing well.
This will be my first wood keyboard case!
Will this work with a DZ60? Any MOQ?
I still never got an invoice for my order. What should I do about that?
I love this design and forwarded to my friend :) I'm still too noob to build my own board yet, but still can appreciate this :)
I love this design and forwarded to my friend :) I'm still too noob to build my own board yet, but still can appreciate this :)
I love this design and forwarded to my friend :) I'm still too noob to build my own board yet, but still can appreciate this :)
I can sympathize about being intimidated by assembling a board from scratch for the first time.
That's why I'm probably going with a fully assembled board like this one, for this particular case.
https://kbdfans.cn/collections/fully-assembled-keyboard/products/fully-assembled-yd60ble-pcb
Someday I'll get to soldering myself.... probably. ;)
I grabbed the beech. Is there an email I can send about my order though? I swear I put "inside" for the logo but it's coming up "back" when I view it.
Received the invoice last Saturday; just payed for it today.
I'm eargerly waiting for this case! It's going to be part of my very first build. Can't wait! :D
So many awesome wood cases, but only for 60s. Sadface.Bigger would only be trouble.
Good luck with GB!
Will these be quality controlled and checked before shipped out?
We've hit our target! We've been really excited and can't say how thankful we are :) For those who've purchased 2 cases or more, we've got a small gift for you ;) Check out our wood keycaps, R4 at OEM profile, we'll be giving out a random wood keycap along with your case.
(Attachment Link)
Thanks for the update!
Will there be a round 2 or extras available?
Thanks for the update!
Will there be a round 2 or extras available?
Thanks for the update!
Will there be a round 2 or extras available?
I'm interested too
KMK Labs.
Show Image(https://s25.postimg.cc/mujnlf3yn/Full_Size_Render_4.jpg)
Just got my YD60BLE PCB with Silent Gateron Blacks from KBDFans today. This is what I plan to put in my Createboard.
Just need to wait for that and the GMK Necro (https://geekhack.org/index.php?topic=94937.0) keycaps to arrive now!
EDIT: Geez, why did I pick a layout that uses a 2.00 shift key? Damn, thats not common. Yarg.
Hey guys! Just want to share some updates with you.
(Attachment Link)
The cases are done and the factory will be shipping them to us next week! We hope to begin QC this coming Saturday! Afterwards, we will be sending out the cases ASAP. :)
Thank you for your patience and support again! Please bare with us a little longer, it's almost done!
Thanks for the update!
Will there be a round 2 or extras available?Thanks for the update!
Will there be a round 2 or extras available?
I'm interested too
KMK Labs.
Hey Darknight00z and Kerasan, thanks for the messages and sorry for the late reply!
There should be some extras, we'll make a small announcement in ig and GH so please do stay tuned!
We would love to have a r2 for the wood case, but for the moment we would like to focus on completing r1 first.
Hey guys, we're sorry to tell you some bad news.
With Typhoon Mangkhut approaching, we are advised not to head over to the warehouse until it passed, so QC will have to wait for the moment.
The place is watertight so please don't worry about the conditions of the cases. They are kept safe ;)
We did a preliminary check on the cases last week, some of the cases will need to be returned to the factory for minor defects. But for others, we will start posting them out once full QC is done.
Hey guys, updates again, we've just finished QC. The first batch is now scheduled to be shipped this week. However we will also be sending some back to the factory due to minor faults, eg. scratches, requiring further polishing as such.:thumb:
We wanted to make sure the case is of quality, so we've spend some time speaking with the factory and agreed on the work that needs to be done.
Tracking no. will be sent out to your email once the package is sent. So please do check your emails!
Hey guys, updates again, we've just finished QC. The first batch is now scheduled to be shipped this week. However we will also be sending some back to the factory due to minor faults, eg. scratches, requiring further polishing as such.
We wanted to make sure the case is of quality, so we've spend some time speaking with the factory and agreed on the work that needs to be done.
Tracking no. will be sent out to your email once the package is sent. So please do check your emails!
Some updates on delivery and the cases::thumb:
Most of the cases that require further polishing are Black Walnut cases.These are now back in factory and work has begun on them, so there will be small delays for some black walnut buyers. Most of the cases that were sent out now are Bubinga cases.
We will contunue sending out your cases and tracking numbers these few days. Some of you in Asia should receive your cases soon.
Apologies again we are not sending the cases out fast enough, we are a two people team but we will try to sort out the logistics as quickly as possible.
Some updates on delivery and the cases:
Most of the cases that require further polishing are Black Walnut cases.These are now back in factory and work has begun on them, so there will be small delays for some black walnut buyers. Most of the cases that were sent out now are Bubinga cases.
We will contunue sending out your cases and tracking numbers these few days. Some of you in Asia should receive your cases soon.
Apologies again we are not sending the cases out fast enough, we are a two people team but we will try to sort out the logistics as quickly as possible.
Just received my tracking number for walnut :thumb:
which shipping company is handling the GB?Hongkong Post, will be handed over to DHL (like every German parcel I guess, never got a foreign parcel not delivered by DHL )
Ok thanks. I got the notification for a bubinga casewhich shipping company is handling the GB?Hongkong Post, will be handed over to DHL (like every German parcel I guess, never got a foreign parcel not delivered by DHL )
Hi everyone! Some progress updates, all tracking no. for the first batch has been sent out! The factory will be sending the second batch to us this coming Saturday, so our plans were to send out the rest in this month.
Please be sure to check your email and the delivery status. We’ve noticed some are held in custom due to tax, please remember to pick them up!
Thanks.
Any news on that second batch?
Hey, sorry some bad news again, the factory told us due to continuous rainy weather, the newly applied hard wax oil has not dried up yet, so they haven't sent it to us yet. We're waiting for the factory to report on any progress for the moment. We will update again when we hear from them.
Hey guys, updates! Some good news finally!
We've picked up almost all of the wooden cases, save for a few as there's only 2 of us and a lack of storing space...sorry for that. We will be picking the odd few cases left soon.
All of the wooden cases we picked up will be sent out tomorrow, please look out for the emails! Hope these will all arrive before X'mas! Happy holidays everyone!
We will be taking Saturday and Sunday off this week, as we'll be expecting a new member -aka a ball of fur joining our team soon! We'll update over ig again!
Thanks for the support guys!
I just received mine, I'm typing on my keyboard using it right now actually!
It's clean, beautifully crafted, without flaws, congratulations it's perfect! 10/10 would buy again :)
I just received mine, I'm typing on my keyboard using it right now actually!
It's clean, beautifully crafted, without flaws, congratulations it's perfect! 10/10 would buy again :)
Got any pics of that beauty?
Looks funky and chunky, my dude. I have 2 of them coming eventually. I'm planning to put my MT3 Elvin set on one of them. The tolerances look really good for an after market tray mount case. Any issues with rubbing keycaps around the edges?I have problems with the space bar hitting the case
Looks funky and chunky, my dude. I have 2 of them coming eventually. I'm planning to put my MT3 Elvin set on one of them. The tolerances look really good for an after market tray mount case. Any issues with rubbing keycaps around the edges?I have problems with the space bar hitting the case
Gesendet von meinem H8416 mit Tapatalk
Not yet. I tried many different angles of screwing the PCB into the case but it didn't work.Looks funky and chunky, my dude. I have 2 of them coming eventually. I'm planning to put my MT3 Elvin set on one of them. The tolerances look really good for an after market tray mount case. Any issues with rubbing keycaps around the edges?I have problems with the space bar hitting the case
Gesendet von meinem H8416 mit Tapatalk
Hmmm. Have you found a workaround for it?
Not yet. I tried many different angles of screwing the PCB into the case but it didn't work.Looks funky and chunky, my dude. I have 2 of them coming eventually. I'm planning to put my MT3 Elvin set on one of them. The tolerances look really good for an after market tray mount case. Any issues with rubbing keycaps around the edges?I have problems with the space bar hitting the case
Gesendet von meinem H8416 mit Tapatalk
Hmmm. Have you found a workaround for it?
Gesendet von meinem H8416 mit Tapatalk
Will doNot yet. I tried many different angles of screwing the PCB into the case but it didn't work.Looks funky and chunky, my dude. I have 2 of them coming eventually. I'm planning to put my MT3 Elvin set on one of them. The tolerances look really good for an after market tray mount case. Any issues with rubbing keycaps around the edges?I have problems with the space bar hitting the case
Gesendet von meinem H8416 mit Tapatalk
Hmmm. Have you found a workaround for it?
Gesendet von meinem H8416 mit Tapatalk
Well I suppose the good news is that it's wood so you can sand it. But that would suck. Did you contact them about getting a new one?
The strange thing is that I didn't encounter that problem the first few days of using itNot yet. I tried many different angles of screwing the PCB into the case but it didn't work.Looks funky and chunky, my dude. I have 2 of them coming eventually. I'm planning to put my MT3 Elvin set on one of them. The tolerances look really good for an after market tray mount case. Any issues with rubbing keycaps around the edges?I have problems with the space bar hitting the case
Gesendet von meinem H8416 mit Tapatalk
Hmmm. Have you found a workaround for it?
Gesendet von meinem H8416 mit Tapatalk
Well I suppose the good news is that it's wood so you can sand it. But that would suck. Did you contact them about getting a new one?
Nah, that's just the nature of wood. It changes shape for a long time. If you watch those dudes who turn wood on Youtube, they often let wood sit for years before using it. And then they still have issues with the wood swelling/shrinking/cracking
Photos
https://imgur.com/gallery/foF7GOB
I havent got any shipping notification yet. Should I be worried?
Photos
https://imgur.com/gallery/foF7GOB
So, I got my cases several weeks back. I did a test fit and everything was fine. Went to build a new board with these cases today. Now, neither of them work out. The Walnut won't fit a plate. I thought I would just try to go plateless, but the keycaps rub really badly on the edges. Same story with the ash. The ash has shrunk a bit less, but every type of keycap I've tried rubs on the edge. I don't happen to have a router or I would try to fix it.
Any possible way to get this fixed or issue a refund?
Hi guys, anyone here has not gotten their cases yet? The delay is getting annoying and worrying.
Based in Singapore here.
So, I got my cases several weeks back. I did a test fit and everything was fine. Went to build a new board with these cases today. Now, neither of them work out. The Walnut won't fit a plate. I thought I would just try to go plateless, but the keycaps rub really badly on the edges. Same story with the ash. The ash has shrunk a bit less, but every type of keycap I've tried rubs on the edge. I don't happen to have a router or I would try to fix it.
Any possible way to get this fixed or issue a refund?
Hi guys, anyone here has not gotten their cases yet? The delay is getting annoying and worrying.
Based in Singapore here.
I haven't gotten mine yet but I know it's coming soon. There was a problem with the wood I chose, so I'm getting an alternate choice instead. Looking forward to seeing it in person at any rate.
Mine arrived in the mail today!
(Attachment Link)
Mine arrived in the mail today!
(Attachment Link)
Nice! Which wood is that?