Hey guys-- I'm getting an Atomic build started (my first custom build) and I know I'll have lots of questions as I get into this so I figured I'd make a thread.I think that is either similar or exactly the same as the top plate from Ortholinear. If it is I bought one and the bottom row 2u keys may require you to cut off the thin connections depending on where you place them. IIRC it tends to be the thin support on the middle right.
First question-- Jack posted his CAD drawings for the case parts and I want to make sure I cut the right top-plate. I'm using MX style switches and I'm thinking I'd like to have the flexibility to a full 1u layout or optionally have some 2u along the sides/bottom. Does the universal plate (pictured below) allow me both of those options?Show Image(http://i.imgur.com/7YQzuIL.jpg)
Oh yeah sorry, this *is* the Ortholinear Universal MX plate-- Jack posted his CAD files on Github. So it sounds like it will probably work for what want. I've got my semi-final layout almost done, I'll post it here tomorrow and get some feedback.Hey guys-- I'm getting an Atomic build started (my first custom build) and I know I'll have lots of questions as I get into this so I figured I'd make a thread.I think that is either similar or exactly the same as the top plate from Ortholinear. If it is I bought one and the bottom row 2u keys may require you to cut off the thin connections depending on where you place them. IIRC it tends to be the thin support on the middle right.
First question-- Jack posted his CAD drawings for the case parts and I want to make sure I cut the right top-plate. I'm using MX style switches and I'm thinking I'd like to have the flexibility to a full 1u layout or optionally have some 2u along the sides/bottom. Does the universal plate (pictured below) allow me both of those options?Show Image(http://i.imgur.com/7YQzuIL.jpg)
I just went full matrix atomic.
Sent from my iPhone using Tapatalk
Oh yeah sorry, this *is* the Ortholinear Universal MX plate-- Jack posted his CAD files on Github. So it sounds like it will probably work for what want. I've got my semi-final layout almost done, I'll post it here tomorrow and get some feedback.Hey guys-- I'm getting an Atomic build started (my first custom build) and I know I'll have lots of questions as I get into this so I figured I'd make a thread.I think that is either similar or exactly the same as the top plate from Ortholinear. If it is I bought one and the bottom row 2u keys may require you to cut off the thin connections depending on where you place them. IIRC it tends to be the thin support on the middle right.
First question-- Jack posted his CAD drawings for the case parts and I want to make sure I cut the right top-plate. I'm using MX style switches and I'm thinking I'd like to have the flexibility to a full 1u layout or optionally have some 2u along the sides/bottom. Does the universal plate (pictured below) allow me both of those options?Show Image(http://i.imgur.com/7YQzuIL.jpg)
I just went full matrix atomic.
Sent from my iPhone using Tapatalk
Oh yeah sorry, this *is* the Ortholinear Universal MX plate-- Jack posted his CAD files on Github. So it sounds like it will probably work for what want. I've got my semi-final layout almost done, I'll post it here tomorrow and get some feedback.Hey guys-- I'm getting an Atomic build started (my first custom build) and I know I'll have lots of questions as I get into this so I figured I'd make a thread.I think that is either similar or exactly the same as the top plate from Ortholinear. If it is I bought one and the bottom row 2u keys may require you to cut off the thin connections depending on where you place them. IIRC it tends to be the thin support on the middle right.
First question-- Jack posted his CAD drawings for the case parts and I want to make sure I cut the right top-plate. I'm using MX style switches and I'm thinking I'd like to have the flexibility to a full 1u layout or optionally have some 2u along the sides/bottom. Does the universal plate (pictured below) allow me both of those options?Show Image(http://i.imgur.com/7YQzuIL.jpg)
I just went full matrix atomic.
Sent from my iPhone using Tapatalk
Where are you planning to get the plate cut?
Sent from my iPhone using Tapatalk
Still pursuing a solution for the bottom/case. If anyone has good leads on those let me know.One kind of DIY case can be seen here: https://deskthority.net/workshop-f7/iso50-a-hand-wired-iso-inspired-50-keyboard-t14538.html (https://deskthority.net/workshop-f7/iso50-a-hand-wired-iso-inspired-50-keyboard-t14538.html). (The 3D print could well be replaced by a wooden frame.)
Top plate shipped out from Lasergist today, seems it's coming from Greece :cool:
Still pursuing a solution for the bottom/case. If anyone has good leads on those let me know.
Hey man, really nice board. May I ask where you got the pcb? I can't seem to find it on OLKB or anywhere? I'm curious about trying an ortholinear layout and this particular layout looks pretty appealing. Am I right in thinking it is very similar to a Terminus 2? ThanksYeah fairly similar to the Terminus 2 but this has more keys across the bottom-- in fact the PCB and top plate are capable of full 1U grid.