[GB] LZ CLS (Classic TKL) : Finished

[LifeZ]

Acrylic Diffuser for LZ CLS

Order Here

[loud_asian]

Acrylic Diffuser for LZ CLS

Order Here


(Attachment Link)

Am I looking at this correctly? $5 is really cheap

[megaforce]

Silly question, but the aluminum parts are staying the same right? Meaning we can swap between diffuser and no diffuser easily?

[LifeZ]

Silly question, but the aluminum parts are staying the same right? Meaning we can swap between diffuser and no diffuser easily?

yes.
aluminum parts are staying
and
swap between diffuser and no diffuser easily.

[megaforce]

Silly question, but the aluminum parts are staying the same right? Meaning we can swap between diffuser and no diffuser easily?

yes.
aluminum parts are staying
and
swap between diffuser and no diffuser easily.

 

:ok_hand: :fire:

[Slash Emperor]

Slipped my order in before this closed. After agonizing over color, I'm at gray WKL...for now.

[DanB]

Slipped my order in before this closed. After agonizing over color, I'm at gray WKL...for now.

Yay fellow m******* (I saw you at the Boston meetup (I'm you bleed red on Reddit)


Sent from my iPod touch using Tapatalk

[naasfu]

Slipped my order in before this closed. After agonizing over color, I'm at gray WKL...for now.

in my experience, grey is the most versatile and works well with most keyset colorways.

[Slash Emperor]

Slipped my order in before this closed. After agonizing over color, I'm at gray WKL...for now.

Yay fellow m******* (I saw you at the Boston meetup (I'm you bleed red on Reddit)


Sent from my iPod touch using Tapatalk

Heyo, good to see you on GH as well! Couldn't pass down an opportunity to own an LZ board. Looks like it's 65% and TKL season for me right now.

in my experience, grey is the most versatile and works well with most keyset colorways.

All three colors looked nice to me, but I was thinking of throwing OG Cherry dyesubs on this, and the gray spoke to me a bit more than black or silver. It was close, though.

[trexous]

hey LZ can you check if my  order went through please?

[CommonCurt]

Slipped my order in before this closed. After agonizing over color, I'm at gray WKL...for now.

in my experience, grey is the most versatile and works well with most keyset colorways.

+1  I second this.

[WiNloSt]

I just submit my order for the silver one. I can't stand picking between gray and silver anymore, so I need to stop, lol.

[LifeZ]

hey LZ can you check if my  order went through please?

your order
black wk
al plate
brass weight
wk stabz 1set

[poolside]

LZ, can we get a picture of the prototype taken from above? I am wondering how sharp these corners are:
(Attachment Link)

Right?
(Attachment Link)

Thanks!

[Kev]

Can I get a check too please LZ? I just ordered the diffuser too.Do you also have the case dimensions? Thanks!

[handcraftedbits]

Hi, can I get a quick order check?

[mech0nly]

Maybe its the time to share the spreadsheet, LZ


Sent from my iPhone using Tapatalk

[poolside]

Is the deadline for order modifications the 6th or 9th?

[rabbitfire]

Maybe its the time to share the spreadsheet, LZ


Sent from my iPhone using Tapatalk

Agreed!

[LifeZ]

Can I get a check too please LZ? I just ordered the diffuser too.Do you also have the case dimensions? Thanks!

case dimensions 357 * 134.6 mm

[LifeZ]

Maybe its the time to share the spreadsheet, LZ


Sent from my iPhone using Tapatalk

Agreed!

Order check 2017-02-07 ~ 02-09 (korea time, tomorrow morning)
share the spreadsheet

[Kev]

Can I get a check too please LZ? I just ordered the diffuser too.Do you also have the case dimensions? Thanks!

case dimensions 357 * 134.6 mm

Thanks, do you mind giving the height (or thickness?) at the front and rear? Trying to sort out wrist wrests etc

[LifeZ]

Can I get a check too please LZ? I just ordered the diffuser too.Do you also have the case dimensions? Thanks!

case dimensions 357 * 134.6 mm

Thanks, do you mind giving the height (or thickness?) at the front and rear? Trying to sort out wrist wrests etc

about front 20.4, rear 43.8, 10 deg (without rubber bumpon, acrylic diffuser 2mm)

[DanB]

Can I get a check too please LZ? I just ordered the diffuser too.Do you also have the case dimensions? Thanks!

case dimensions 357 * 134.6 mm

Thanks, do you mind giving the height (or thickness?) at the front and rear? Trying to sort out wrist wrests etc

about front 20.4, rear 43.8, 10 deg (without rubber bumpon, acrylic diffuser 2mm)

Hey, have you thought about offering a strip of anodized aluminum in the same dimensions as the diffuser to add non-RGB flair?

[Damonskv]

Can I get a check too please LZ? I just ordered the diffuser too.Do you also have the case dimensions? Thanks!

case dimensions 357 * 134.6 mm

Thanks, do you mind giving the height (or thickness?) at the front and rear? Trying to sort out wrist wrests etc

about front 20.4, rear 43.8, 10 deg (without rubber bumpon, acrylic diffuser 2mm)

Hey, have you thought about offering a strip of anodized aluminum in the same dimensions as the diffuser to add non-RGB flair?

Why is it necessary? Just don't put the diffuser, lz even don't offered it initially

[LifeZ]

Can I get a check too please LZ? I just ordered the diffuser too.Do you also have the case dimensions? Thanks!

case dimensions 357 * 134.6 mm

Thanks, do you mind giving the height (or thickness?) at the front and rear? Trying to sort out wrist wrests etc

about front 20.4, rear 43.8, 10 deg (without rubber bumpon, acrylic diffuser 2mm)

Hey, have you thought about offering a strip of anodized aluminum in the same dimensions as the diffuser to add non-RGB flair?

I have no thought.
I tested to provide additional parts. You can choose.

[ramnes]

I'd be in for a strip of anodized aluminium that could add a touch of color!

[ricyuyc]

Does my order form submitted successfully and could I revise my optional parts after the list posted?

[Kev]

Can I get a check too please LZ? I just ordered the diffuser too.Do you also have the case dimensions? Thanks!

case dimensions 357 * 134.6 mm

Thanks, do you mind giving the height (or thickness?) at the front and rear? Trying to sort out wrist wrests etc

about front 20.4, rear 43.8, 10 deg (without rubber bumpon, acrylic diffuser 2mm)

Thanks mate

[LifeZ]

Does my order form submitted successfully and could I revise my optional parts after the list posted?

Sure. Can be changed before invoicing.

[kconfire]

Hi LifeZ,

Could you please confirm my order?
I'd like to make sure mine went thorugh!

Thank you!

[laden3]

Could you please check my order as well.

[nmur]

Could you please check my order as well.

Hi LifeZ,

Could you please confirm my order?
I'd like to make sure mine went thorugh!

Thank you!

just wait for the spreadsheet dudes

[WiNloSt]

Just some more questions.

I'm a little bit confused between LED back lighting and LED underglow.

Do this board support RGB LED on the switch like Ducky Shine RGB series?

Does underglow means installing some modules at the bottom side of the PCB? And if that's the case do we need to buy those LED modules ourselves?

Does the keyboard comes with any LED of some sort at all?

Thank you

[loud_asian]

Just some more questions.

I'm a little bit confused between LED back lighting and LED underglow.

Do this board support RGB LED on the switch like Ducky Shine RGB series?

Does underglow means installing some modules at the bottom side of the PCB? And if that's the case do we need to buy those LED modules ourselves?

Does the keyboard comes with any LED of some sort at all?

Thank you

Comes with rgb underglow

Does not come with rgb backlighting

[digi]

Will I still be in the cool club if I go with Gateron blacks or do I need to hunt for nixies for 3 years?

[nmur]

Will I still be in the cool club if I go with Gateron blacks or do I need to hunt for nixies for 3 years?

vintage black m8

EDIT: or maybe those new panda switches

[loud_asian]

Will I still be in the cool club if I go with Gateron blacks or do I need to hunt for nixies for 3 years?

Gateron milk tops and black bottoms accomplish the same thing

[airs]

Gateron Yellows with spring of your choice and krytox.

[Fnzzy]

I am maybe going to put mx browns in it. Still need to do some testing with springs and lube. Always these decisions...

[digi]

Gateron Yellows with spring of your choice and krytox.

oOoOoOoOo...I've been out of the MX game for a hot minute, those might be the ones, I need to try some!

[LifeZ]

=========================================


Order Check


=========================================

Please pm for your order change.

[odd]

I added a diffusser to my order, not sure if i have to do much else.

[nmur]

oh damn i didn't realise that shipping to australia would fall under the $70 region, i thought it would be under the $40 Asia region, ouchh

[LifeZ]

I added a diffusser to my order, not sure if i have to do much else.

okay
add diffuser

[LifeZ]

oh damn i didn't realise that shipping to australia would fall under the $70 region, i thought it would be under the $40 Asia region, ouchh

yes, ems is expencive
and cls package support by kin25.
Like TX series box.

[sitch]

LZ, do you have poly carbonated switch films for sale?

[handcraftedbits]

What is "PP fee"?

[Cocopah]

What is "PP fee"?

Paypal invoice fee

[digi]

What is "PP fee"?